[Q] XDAndroid Issues - Touch Diamond, MDA Compact IV ROM Development

First I want to say thanks to all the xdandroid developers, this has made my HTC Touch Diamond fun to use for the first time.
I've been using xdandroid for 4 days and wanted to post the issues I'm having so far in case others have run into them and know of any fixes:
1. Probably 3 out of 4 calls I receive, the other person can hear me but I can't hear them. I've tried toggling speaker phone and mute to no avail. My routine now is to pick up the phone, say "hello?", hang up, then call back whoever called me. Not cool! This is a big issue obviously, since it's a fundamental of the phone, not a "nice to have".
2. Related to issue #1, when I call people back sometimes I can't hear anything (not even the phone ringing.) It seems to happen most often after issue #1 (receiving a call but not being able to hear them.)
3. No ringtones, only one called "Silent", so the only way I know that I have a call is the vibrate. I don't have any files on the internal storage except for the andboot so non-ansi characters in file and folder names isn't the issue. I can't reformat the drive using the hp format tool because my phone's drives don't show up in the dropdown of possible options to reformat, even though I can see and browse their drives in My Computer. Is this tool incompatible with Windows 7 x64 maybe??
4. The touch screen calibration is off. I've tried deleting the ts_calibration file probably 10 times and reran the calibration test. I've tried pressing softly and hard, both with my finger and with the stylus. Within windows mobile the touch screen is fine but within android it's off where it clicks compared to where I press. Oddly enough it works fine if I use my stylus, however it's impossible to use the keyboard with my finger.
5. The Gen.Y dual boot app only works every other time I reboot my phone. Half the time it will load up the Gen Y load screen and boot into android. The other half of the time it will just load up windows mobile without ever loading the Gen Y app.
6. Battery life, no shocker here and a known issue. My phone will be fully charged then I unplug it and it'll say immediately that I have less than 10% remaining. Other times it'll last unplugged for 4-5 hours (which is still bad but is good for xdandroid it seems.)
Any tips on resolving any of these issues would be greatly appreciated, the funny thing is that even with such fundamental issues as these, I still enjoy xdandroid more than windows mobile!!

This would be a much more relevant place to post your questions:
Touch Pro, Fuze Android Development

It's OK I figured out how to fix all of the issues above. I bought a Evo 4G and stopped using xdandroid...

Related

Several issues and annoyances with Tilt2

My wife and I each purchased Tilt2's earlier this week. We both come from Windows Mobile 6.1 phones and are generally happy with WinMo products and comfortable with tweaking them.
We're both having some trouble with the Tilt2 and I'm hoping that someone here might be able to help.
1) Bluetooth sound quality - we each use Bluetooth headsets and have noticed lots of crackling unless the phone is turned with the back facing the headset. This didn't happen with our previous phones (same headsets) unless we got 15-20 feet away from the phone.
2) Dropped calls - I've noticed a ton of dropped calls when I'm talking on the phone and driving along my normal work commute. There are 1-2 holes along the route where my previous phone would drop, but this one drops 5-6 times. I found these radio updates in the ROM forum. Would that help?
3) General performance - The phone seems a little bit laggy and slow to react. Nothing like what we saw in demo videos on sites like wmexperts.com. My wife even reports that hers has completely locked up on her before. And I've noticed a severe lag waiting for the phone to come back after I've flipped the keyboard out. I assume that installing a custom ROM would help with this as it's helped on previous phones we've owned. However, there isn't a 100% working AT&T ROM to revert to yet (only one that appears to work is missing radio and bootsplash at this point) in case the custom ROM doesn't perform better, so I'm a little leary of doing it. Should I be worried? Or will the custom ROMs here help get rid of the lagginess.
4) Switching to landscape mode - My wife told me that her phone isn't always switching to landscape mode. She doesn't have any apps installed yet so I'm assuming it's in all of the default screens. Should everything work in landscape mode?
Thanks in advance!
e_dogg said:
My wife and I each purchased Tilt2's earlier this week. We both come from Windows Mobile 6.1 phones and are generally happy with WinMo products and comfortable with tweaking them.
We're both having some trouble with the Tilt2 and I'm hoping that someone here might be able to help.
1) Bluetooth sound quality - we each use Bluetooth headsets and have noticed lots of crackling unless the phone is turned with the back facing the headset. This didn't happen with our previous phones (same headsets) unless we got 15-20 feet away from the phone.
2) Dropped calls - I've noticed a ton of dropped calls when I'm talking on the phone and driving along my normal work commute. There are 1-2 holes along the route where my previous phone would drop, but this one drops 5-6 times. I found these radio updates in the ROM forum. Would that help?
3) General performance - The phone seems a little bit laggy and slow to react. Nothing like what we saw in demo videos on sites like wmexperts.com. My wife even reports that hers has completely locked up on her before. And I've noticed a severe lag waiting for the phone to come back after I've flipped the keyboard out. I assume that installing a custom ROM would help with this as it's helped on previous phones we've owned. However, there isn't a 100% working AT&T ROM to revert to yet (only one that appears to work is missing radio and bootsplash at this point) in case the custom ROM doesn't perform better, so I'm a little leary of doing it. Should I be worried? Or will the custom ROMs here help get rid of the lagginess.
4) Switching to landscape mode - My wife told me that her phone isn't always switching to landscape mode. She doesn't have any apps installed yet so I'm assuming it's in all of the default screens. Should everything work in landscape mode?
Thanks in advance!
Click to expand...
Click to collapse
As for #4: Not all programs have a landscape mode natively.
jlczl said:
As for #4: Not all programs have a landscape mode natively.
Click to expand...
Click to collapse
Thanks. I figured that she might be using an app that doesn't work in landscape since I haven't come across it yet.
Also, regarding #2, I should have mentioned that I have 4.48.25.20 as my current radio.
1) I use Jabra 2nd gen and mine is working great. A little crackling sound but nothing major.
2) Depend on the area you live and coverage, you might want to try different radio. I have stock radio and mine is working great. Better than my fuze was actually. I can get 1 or more bar than Fuze and call quality is super clear. No drop calls yet while I had like 2-3 drop calls with my fuze.
3) I am still running on stock rom and yes indeed it's slow and sluggish. I have to reset the phone physically sometimes. I am not too happy about moving the battery cover just to reset as well. With custom rom, the phone will be snappy since some people are running custom rom with their Tilt2 already. I am in the same boat as you. Waiting for the complete stock rom dump. Until then.
4) Not all the landscape work as you have already found out.
I use a BlueAnt and my BT reception is good.
I thought mine was slow at first but as I tweaked it a bit, turning off alerts and pop ups, it SEEMS to be more of what I expected.
Haven't had a dropped call issue.
But, I am thinking that I will flash the ROM when something comes along.
Thanks for the replies.
FWIW, my wife uses a Jawbone 2 and the crackling is noticable on both ends of the call. I use a first-gen Jawbone and have nocticed the crackling as well. It seems that it works better when the phone is on the same side of my body as the headset. I did not notice this crackling on my Dash and Blackjack 2 nor her Dash.
I think the dropped calls problem is definitely area related. My wife is currently out of town and it hasn't dropped her calls at all that I know of. And when I'm at home, it's no problem. It's just that on my regular commute, it drops 5-6 times where my previous Dash and Blackjack 2 only dropped once or twice occasionally. I've only made my commute once since I got the Tilt2, so maybe there were some coincidental network issues. That said, call quality has been very good.
I just turned off the new SMS notifications. I've also removed a couple of tabs that I know I'm never going to use (stocks, AT&T, and music) at that seems to have made things a little snappier too.
HAH! Not more than 1-2 minutes after I posted my last message (from my laptop), I went to use the internet connection on my Tilt2 and it locked up. A message appeared asking if I wanted to send error details to MS and then my phone turned off.
Another thing I've noticed is that Opera takes a *really* long time to switch from landscape to portrait. And it seems to be significantly slower than Opera Mini was on my Dash and Blackjack 2. Maybe because Opera Mini is Java-based on those platforms?
My wife is now reporting that her Tilt2 won't unlock unless she slides open the keyboard. Her Exchange connection requires the phone to automatically lock and require a PIN entry. I suggested tapping the power button but that doesn't wake it up, either.
Any suggestions? I'm thinking she might have a bum unit since mine isn't having nearly the trouble hers is.
As far as the lockups, I think there was a thread somewhere about that. Mine doesn't actually lock up but it hangs horribly. Give it 5min or so and it figures itself out, usually involves opening the keyboard at the same time it is launching something, sms in my case.
Suggestion? Hard reset hers and if it continues swap it out.
SoapDoctor said:
As far as the lockups, I think there was a thread somewhere about that. Mine doesn't actually lock up but it hangs horribly. Give it 5min or so and it figures itself out, usually involves opening the keyboard at the same time it is launching something, sms in my case.
Suggestion? Hard reset hers and if it continues swap it out.
Click to expand...
Click to collapse
Thanks for the tip. Unfortunately, she's out of town right now so I actually haven't seen the things she's complaining about first-hand (except for a couple of things that have happened on mine too).
I'll send her instructions for a hard reset and see if she's adventurous enough to try it on her own. The AT&T store near where she's at is exceptionally good - they really know Windows Mobile there and were a big help in getting the phone initially set up. So, worst case, she can go there and have them do it.
e_dogg said:
Thanks for the tip. Unfortunately, she's out of town right now so I actually haven't seen the things she's complaining about first-hand (except for a couple of things that have happened on mine too).
I'll send her instructions for a hard reset and see if she's adventurous enough to try it on her own. The AT&T store near where she's at is exceptionally good - they really know Windows Mobile there and were a big help in getting the phone initially set up. So, worst case, she can go there and have them do it.
Click to expand...
Click to collapse
Don't run to fast with my advice, I'm a complete noob but hard reset would be the first thing I would try. It is a microsoft product after all and I'm pretty dman lazy to run to the store first.
FWIW- I have a Jawbone 2 and have cracking in the audio. Had it with my Fuze also and have always wondered if it was the headset or phone. I don't think I could keep my fuze in the holster because of the crackling.
I have some slight performance issues, but it's not to bad. Seems mostly relating to minimizing a program and starting a new one.
I have a strange problem with the TF3D photo tab. It's slow to get the image clear. I select an image and then try to scroll through them. It hangs on one, then flips it's orientation (I haven't moved the phone though). Anyone else have issues with the photo tab?
e_dogg said:
My wife and I each purchased Tilt2's earlier this week. We both come from Windows Mobile 6.1 phones and are generally happy with WinMo products and comfortable with tweaking them.
We're both having some trouble with the Tilt2 and I'm hoping that someone here might be able to help.
3) General performance - The phone seems a little bit laggy and slow to react. Nothing like what we saw in demo videos on sites like wmexperts.com. My wife even reports that hers has completely locked up on her before. And I've noticed a severe lag waiting for the phone to come back after I've flipped the keyboard out. I assume that installing a custom ROM would help with this as it's helped on previous phones we've owned. However, there isn't a 100% working AT&T ROM to revert to yet (only one that appears to work is missing radio and bootsplash at this point) in case the custom ROM doesn't perform better, so I'm a little leary of doing it. Should I be worried? Or will the custom ROMs here help get rid of the lagginess.
4) Switching to landscape mode - My wife told me that her phone isn't always switching to landscape mode. She doesn't have any apps installed yet so I'm assuming it's in all of the default screens. Should everything work in landscape mode?
Thanks in advance!
Click to expand...
Click to collapse
#3 I am running NRG ROM Photon date 10/17 and it is insane on my tilt 2. No radio change either. Stupid fast, eye candy, and never a dropped call or sluggish issues. Link below (5k plus thread, really read the first page to see the versions and Faq's)
http://forum.xda-developers.com/showthread.php?t=553506
I'd like to add that I'm also having some issues with sound and response time.
My phone starts fresh with about 65% of resources used up. After regular phone/contacts usage for an hour I'm at around 70% and after Opera, the phone is done. I can browse or use file explorer or music but there goes the multi-tasking.
I haven't flashed a ROM yet. I just wanted to see what AT&T did with this thing 1st.
One more thing, why did they switch the FN and Shift keys? My brain is having a hard time getting used to it, especially when the shortcuts that require the Fn key are on the bottom row.
I can't really help you out too much, but I haven't been experiencing many of these problems at all, and I'm still on the stock rom, just cleaned it up a bit. Spend some time on the forums and you'll find some good quick hacks to try before you try a new rom.
superrrguy said:
I'd like to add that I'm also having some issues with sound and response time.
My phone starts fresh with about 65% of resources used up. After regular phone/contacts usage for an hour I'm at around 70% and after Opera, the phone is done. I can browse or use file explorer or music but there goes the multi-tasking.
I haven't flashed a ROM yet. I just wanted to see what AT&T did with this thing 1st.
One more thing, why did they switch the FN and Shift keys? My brain is having a hard time getting used to it, especially when the shortcuts that require the Fn key are on the bottom row.
Click to expand...
Click to collapse
Touch FLO 3D uses up quite a bit of RAM. I unloaded it and restarted, and my phone is down from 65% to 49%. Unfortunately, I'm kind of liking Touch FLO 3D
Linear2202 said:
FWIW- I have a Jawbone 2 and have cracking in the audio. Had it with my Fuze also and have always wondered if it was the headset or phone. I don't think I could keep my fuze in the holster because of the crackling.
I have some slight performance issues, but it's not to bad. Seems mostly relating to minimizing a program and starting a new one.
I have a strange problem with the TF3D photo tab. It's slow to get the image clear. I select an image and then try to scroll through them. It hangs on one, then flips it's orientation (I haven't moved the phone though). Anyone else have issues with the photo tab?
Click to expand...
Click to collapse
Good info about your Jawbone issues. I have an old Plantronics headset that I'm not really using anymore. Maybe I'll give that one a try to see if it's just that Jawbones don't like these new versions of HTC phones (it worked great on her Dash).
As for the photos tab, it seems to work ok. Though the first "flip" through the pictures seems to be slower than subsequent flips.
I found that hiding tabs I won't be using like the "AT&T" tab seems to help speed things up. I think I have 3 or 4 hidden.
amurch said:
#3 I am running NRG ROM Photon date 10/17 and it is insane on my tilt 2. No radio change either. Stupid fast, eye candy, and never a dropped call or sluggish issues. Link below (5k plus thread, really read the first page to see the versions and Faq's)
http://forum.xda-developers.com/showthread.php?t=553506
Click to expand...
Click to collapse
Thanks - good to hear of your sucess with the NRG ROM. That's the one I'm planning on trying since I really like the 6.5.1 changes.
redpoint73 said:
Touch FLO 3D uses up quite a bit of RAM. I unloaded it and restarted, and my phone is down from 65% to 49%. Unfortunately, I'm kind of liking Touch FLO 3D
Click to expand...
Click to collapse
Yeah, Touch FLO 3D sure is purty. And, now that I have the tabs sorted and hidden the way I like, it's very easy to use.
Just an update...the Energy ROM seems to have cured the dropped calls. With the stock AT&T ROM, calls dropped about 5-6 times on my regular commute. With the Energy ROM, not a single one!
Something that has happened to me now a few times...I get a call on the phone. Caller ID and picture show up fine. Screen turns off..later i turn the screen on and the phone number is not accurate any longer and the picture is gone..
Anyone had this happen to them?
Linear2202 said:
Something that has happened to me now a few times...I get a call on the phone. Caller ID and picture show up fine. Screen turns off..later i turn the screen on and the phone number is not accurate any longer and the picture is gone..
Anyone had this happen to them?
Click to expand...
Click to collapse
Yep - happened quite often with the stock AT&T ROM. I don't recall seeing it after switching to the Energy ROM.

Am I the only one who has touch-screen problems with the vogue on/off? Seriously..

I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
mine is unresponsive sometimes and i have to tap on the back of the phone to get to work again. i thinks its going out soon
That's what I thought about my old one, I figured I had dropped it to much.. because I did lol but now I got a new one 2 weeks old and I'm running into the SAME problems.. I'm assuming I must be doing something wrong with how I've got **** set-up
j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
j18yo i think that your problem might be that to many programs run when you start your vogue that happened to me before and i hated it but then i heard of a program named "Space Reclaimer" FREE and it made my vogue much more responsive because the program stops any programs that start when you turn on your vogue or any windows mobile phone
I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.
j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
What ROM are you running? I asume that wehn your new device came you loaded it the same as the old one. It has to be something with the ROM you are runnning or a problem with a program causing your issue.
My phone would do this periodically too, with Vin's latest ROMs. I turned off Manila and am running Titanium now. Interestingly - no lags when unlocking since. I'll keep Titanium on for some time to see if that makes it go away. I had an issue with both his current v2 and v4 (which I am running now).
Ive had to replace my screen twice and the whole phone once because of touch screen problems. Thank God for the insurance.
Ah yes... to what OP mentioned:
I do not beleive it is a more pressure thing. I do not think it is more pressure that is required but rather that the phone is non responsive. If you are unlocking and typing a PIN, it takes the PIN and all but it takes perhaps one digit every 5 seconds. That's my experience anyway. So it is just slower, as if something was consuming the CPU and UI is not responsive.
crazylegs91 said:
I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.
Click to expand...
Click to collapse
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans
j18yo said:
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans
Click to expand...
Click to collapse
Update: I don't think CR erases things as much as it kills processes that won't restart. Thru trial and error, I've adjusted my CleanRAM settings to where I haven't had the problem for a couple of days. I'm able to do a Level 3 cleans on a once a night schedule and during the day if need be. In settings, I have it to close all apps, launch startup progs, and display today screen. I have no exceptions listed for either running progs or startup progs. I have the most up to date version from the OTA update in the program.
The program links in my StartUp folder are: poutlook (original on ROM), sddaemon (original on ROM), WLMUpdate (original on ROM), Glossybars.exe (I added this), biotouch.exe (I added as I thought CR killing this was the source of the problem), pocketwit.exe (I added), and SIPChange (I added).
One thing I did do was delete the link for TouchPal from the Startup folder. I did this for other reasons (I use FingerKeyBoard). Not sure if this was part of the problem.
I can scroll with d-pad and no touch lag.
On a side note, can I delete any of poutlook, sddaemon, or WLMUpdate from the startup folder to save battery power?
I'm probably just a bit above a newb so sorry if I don't make sense.
Update: Just for kicks, I deleted the links for glossybars.exe and pocketwit.exe from my StartUp and it started locking again after running CleanRAM. I put them back in and it works again even after running CleanRAM. Maybe someone with more knowledge can explain this. I'm just keeping it the way it is now...
Hmm weird that you removed something not very important like pocketwit an cleanram caused problems again.. someone has to have some info on this??
I deleted everything from my StartUp folder but my SPB Mobile Shell.. I didn't have sddaemon, but I did have poutlook and WLMUpdate both of which I deleted.. then I had some other programs that aren't necessary for the phone.. I have no problems on restart or anything, and the % showed being used is stays around the 30's now instead of 40s/50s.. and when I run programs it usually reachs 50% tops now instead of 60/70% I used to get.
PS: Pocketwit isnt bad I used to praise the program but now I've tried MoTweets and.. I can't think of the other one now.. ****.. it's really good though but it seems to use a lot more phone power than MoTweets so I went back to that.
Pocketwit kept giving me problems, started saying I need to install that NET 3.5 or whatever but when I try to it says I have a later version already so it won't install, then other times it'll work completely fine.. but MoTweets I like better anyways
Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.
crazylegs91 said:
Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.
Click to expand...
Click to collapse
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm running a stock Sprint 6.1 ROM. Thanks though.
bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm not using the TouchFLO interface, does that mean its still on though?
I'm not completely up on understanding all this
This was happening with Vin's Rom for me as well. I was tripping out pressing ON so many times with no screen showing up but phone light on! I believe it could be the power settings. I disabled the "Turn off device" which I believe was mentioned in his notes about the rom.
I gave up on this problem for a while but found something when researching how to disable to cube. I used the registry edit in this thread to disable to cube post #69. I didn't do any of the other steps because I'm not having memory probs (42% with pocketwit in the bckgrd).
http://forum.xda-developers.com/showthread.php?t=368269&page=7
I noticed that biotouch.exe never shows up in the running processes menu in CleanRAM and I don't have the "lock/freeze" scrolling problem any longer and I can run CleanRam without the problem occurring. I can press any item on the screen as well with no delayed response.
However, this stops you from being able to finger scroll and do the "side to side" scroll in Messaging. I never really finger scrolled and prefer using the d-pad for scrolling so losing that functionality isn't a big deal to me.
If anyone can figure out how to keep this working so smooth and have the option to finger scroll, I'd be much obliged. It just seems that biotouch.exe craps out sometimes and locks up the d-pad. If they could both work equally well....

Random Weird Issues?!?

Hi All,
Using official htc sea wm 6.5
1
=================
Anyone encountered this so called memory leak before??
Try this:
Lock screen by going Start (honeycomb) then lock
I noticed if i lock the screen memory uses up ALOT whole faster... within half a day it hits to 78% used... When incoming calls, screen does not show, but phone vibrates, i press the answer and phone picks up ok... other functions like sms and emails works ok, but alot slower too.
2
==============
I'm also using a mp3 ringtone though.. not such if this caused it, i have actually shorten and compressed the file already, was 7mb, drop to 3mb to 1.8mb now to 1mb...
I noticed when calls comes in, the screen does not lag that much (earlier issue does not happen in this assumption)...
3
==============
Camera application if activated in my pocket (Mis-press, i current assume so..) for unknown amount of time, i notice it and close it.. applications fail to launch properly...
Bottom menus (the phone(left), camera(right) on home screen etc) all dont work anymore.. it jus does not display out properly..
Top menus (close button etc) also does not display properly.. say i press start button (top right on home screen), the top menus bar changes to light blue, but honeycomb on main windows does not come out. No close button on top right either, but i can still close it (looks like not rendered properly of sorts)
TouchFlo3d works still though... i can rotate around phone, contact etc etc
4
==============
Memory uses up alot faster... after i soft reset the phone.. memory hovers at 50%, within an hour will go up to 61% odd.. but stabilizes... phone can be used ok..
5
==============
There are occasional random crashing of god knows what.. sometimes during sms i notice theres a popup of errors in some service of sorts... notice happens during sending sms mostly...
6
==============
Screen auto changes between landscape and portrait mode, sometimes it auto recovers, else, i need to slide out keyboard for awhile, wait for it to stablise, then close keyboard. Not sure if this is the result of taking out from the lather pouch??
Anyone noticed or encountered all these before?? HELP!! ; ;
Program installed:
==============
Google Maps (Update)
Batti
Carmin Mobile XT
Windows Live (Update)
NoPushInternet
MarketPlace
Youtube (Update)
WorldMate Live Installer
WorldMate Live
SKTools
MySoftReset
All programs have been there more or less for a few months already... The programs indicated with (update) means i updated further from default.
Is this a software thingy probably that a hard reset could solve it, or this is more like a thingy that needs to go into service center??
1. That sounds normal. I was using the official HTC WinMo 6.5 ROM a while back and I remembered that the RAM usage stabilized at around 75%. This is regardless whether you use the lockscreen or not.
2. Don't know what you mean...
3. Sounds like a one-off thing. Can you replicate the problem consistently?
4. This is normal. Goes for all WinMo devices.
5. Sounds like an issue with your carrier's network.
6. My best guess is that the magnet on the pouch is affecting the screen rotation.
ohyeahar said:
1. That sounds normal. I was using the official HTC WinMo 6.5 ROM a while back and I remembered that the RAM usage stabilized at around 75%. This is regardless whether you use the lockscreen or not.
2. Don't know what you mean...
3. Sounds like a one-off thing. Can you replicate the problem consistently?
4. This is normal. Goes for all WinMo devices.
5. Sounds like an issue with your carrier's network.
6. My best guess is that the magnet on the pouch is affecting the screen rotation.
Click to expand...
Click to collapse
Are u using any mp3 ringtone? Does it have any issues if we use a big mp3 as ringtone??
Noticed if i use a big file, when calls/sms comes in, phone will "lag" and vibrate with no display of incoming call...if you press call(pickup) button, it ok ok..
chuachongchee said:
Are u using any mp3 ringtone? Does it have any issues if we use a big mp3 as ringtone??
Noticed if i use a big file, when calls/sms comes in, phone will "lag" and vibrate with no display of incoming call...if you press call(pickup) button, it ok ok..
Click to expand...
Click to collapse
I use a 1MB mp3 file. Works fine for me. But I can see that it makes sense for there to be a lag if a large file was used. Lesson here is: try to use small sound files for performance!
ohyeahar said:
1. That sounds normal. I was using the official HTC WinMo 6.5 ROM a while back and I remembered that the RAM usage stabilized at around 75%. This is regardless whether you use the lockscreen or not.
2. Don't know what you mean...
3. Sounds like a one-off thing. Can you replicate the problem consistently?
4. This is normal. Goes for all WinMo devices.
5. Sounds like an issue with your carrier's network.
6. My best guess is that the magnet on the pouch is affecting the screen rotation.
Click to expand...
Click to collapse
one thing..
for issue 3, its happening at random.. happened maybe a total of 3 times... i do not actually see a pattern as or yet..
for issue 5, i get this Microsoft error that says some process has crashed and need ask if i want to send the report to microsoft or not.. dont think this is related to carrier..

Serious issues.

Hi,
So i have some serious issues with my touch pro 2 and i wanted to know if this is ''normal'' or if i should contact HTC.
I first had an Iphone 3G but i wanted a physical keyboard so i brought the touch pro 2, the first few months i just had a few issues but now it's getting really bad let me list them:
1. Random calls, this is the worst one it keeps calling the last person that calls me first i tought it was the headset because it only calls people when the headset is plugged in. Today i jammed the headset button but it keeps calling the last person that called me randomly, since 1 week it also does this without the headset connected even when the phone is just sitting on the table.
2. Keylock, i don't know if i say it right but it is when you lock your phone so you can put it in your pocket and it won't do stuff. It DOESN'T work if i lock it (i go to start press lock and than turn the screen off) it still keeps doing stuff and calling random persons. Also sometimes i can turn the volume down and up and sometimes i can't.
3. Messages, When i send a message after i pressed send 50% of the message still keeps inside the message screen (just looks like i typed a new message)
4. Media player, it doesn't work in any way,shape or form. First it work ''fine'' but now i can't get my music in it i tried multiple ways but it won't work. The worst thing is i connected it to my pc transferd some music and the freaking thing copied ALL my audio from my pc to the phone (i make movies so i have 1000's of sound effects) and those are ALL in my media player exept my music.
5. Random things to start, when i'm doing stuff in opera suddently my text inbox launches or my email for no reason.
6. The on/off/lock switch, it is waaaayyyy to responive sometimes it just turn the device on in my pocket or turns it off.
7. Digital keyboard, i can switch it to 3 different types of keyboards but it's just random if i want to switch it i just tick the button really fast and sometimes the menu will pop-up sometimes it won't. And when i selected the right keyboard it sometimes decides to switch backagain or to some other keyboard.
8. WI-FI, sometimes it will just turn on the wi-fi for no reason, when i go to settings and check if it's on it sais it isn't but it still tries to connect to a hotspot.
9. RAM memory, it's always around 80% with NO applications running when i keep this thing on for longer than 24 hours i can't play video's anymore because it doesn't has enough RAM so i have to turn it off and on again.
10. Album, for some reason it's just giving random error's while it's still working.
This are only my major problems there are alot more i've got, i really get irritated by this phone sometimes i just feel like smashing it. Especialy when it keeps calling random people non-stop for 1 minute long.
When i wanted a new phone i saw that the touch pro 2 has windows on it, now i know windows has some problems so i hoped windows mobile will just work fine but as i can see it won't.
Here is some phone info:
HTC touch pro 2
4 months old
firmware 6.5
didn't mess it up or anything everything is still original.
restored it to factory settings 3 times but it won't help with solving the problems.
Is this just common for this phone or is it just my phone? Because if it is common i will contact HTC that i want my money back because i didn't payed 700 Euro's for a phone that isn't working properly.
Never had a problem like those....
Sounds like a bad handset.
Ditto, sounds like a defective device. Time to cash in on that warranty! Nonetheless, here's a couple of comments corresponding to your issues.
1 & 2
Sounds like your device is registering phantom presses of the call start button.
3
Don't know...
4
Just use drag and drop to your microSD. Don't depend on WMP to sync.
5
Random things shouldn't happen. If it happens even after a hard reset, it's definitely defective.
6
Never heard of the standby button on the TP2 being over-sensitive.
7
To bring up the keyboard selector, you need to tap the tiny triangle on the right of the keyboard icon. Alternatively, you can long-tap on the keyboard icon.
8
Definitely weird.
9
WinMo 6.5 is a RAM hog. But nonetheless, even at 80% RAM usage, you should still have about 46MB free. That really shouldn't stop you from doing anything. Many ppl use a RAM cleaner. My personal practice is to just do a soft-reset every 2 days.
10
What errors are you seeing?

WinMo to Android, HTC TP2Tilt- Time slow, Speaker Buzz..

I've got an HTC Touch Pro2 Tilt with WinMo 6.5 and all works there. I've fiddled with Android on my other HTC phones but they weren't far enough along with the porting to stay. I got XDAndroid last weekend and installed it. It works very well and would stay with it as primary except for 2 big issues:
1.) the clock looses time. In about 8 hours, it will be off more than 30min. I don't have system time turned on because I live too close to a time change line and it's really annoying not knowing what time you're looking at. I just want it to stay on one time zone.
2.) when using the phone, if I open the on-screen dial pad to type in a persons extension number, the speaker will start buzzing very loudly and the only way to get it to stop is to end the call.
of course the BT and the Camera doesn't work either but they already said that's in works so I'll keep my eyes on that as well but those aren't show stoppers. Any help anyone has is appreciated.
Joe

Categories

Resources