Related
Managed to get Touch Flo working tonight (between 5&6am), i am using Shadow as ROM, the steps i completed are as follows:
Install Instructions
1) install touchflo and softreset
2) Delete the bio.lnk in Windows/startup
3) Delete the reg file in HKLM/Software/HTC/Biotouch/Biotouch ver
4) Map Touchflo to any free button
5) Softreset
6) Start touchflo, then go to Windows folder and start Biotouch.exe
(These are exactly the steps i took, i dont know anything else, these just worked for me and i posted them in the hope they might work for someone else!!)
Usage Instructions
1) Press the hardware button you specified to start toughflo
2) Press the hardware button you specified to rotate the cube
3) Press the red call end button to stop it and get back to the main screen
If there are any hangs, uninstall TouchFlo and start again
There are 2 irritating things (very minor!!!)
1) Cant be used with finger like real touchflo i.e. cannot drag finger up to launch or down to exit (yet!!)
2) The hardware button rotates the screen as well as starting touchflo, this might not sould like much but, for example, if the last screen you were looking at was the Music/Photos/Videos page and you pressed the red call end button to get out of TouchFlo, and you want to go back to the Music/Photos/Videos page, you will press the hardware button to start TouchFlo, but at the same time as starting it, it also rotates the screen so it is on the page after the last page you were using, resulting in needing to press the hardware button once to start TouchFlo and twice more to get back to the screen you left off at.
As i said these are minor but this should work for now untill it is properly sorted out
Enjoy
Regards
hey
i will mod my cab and release a beta once i confirm its working.
thanks again
Awesome work guys, all of you cannot be thanked enough. It's a thankless job sometimes, but this ain't one of them! Keep it up
jasjamming said:
hey
i will mod my cab and release a beta once i confirm its working.
thanks again
Click to expand...
Click to collapse
i have done no modification to your alpha cab, i followed some instructions i found on your other site and they didnt work for me, black screens, massively slowed down Shadow, so i did it slightly differently and it worked first time, nice and fast and everything seems to be working!!!
As i said i am using your Shadow rom, no mods, my own software installed thru cabs, and using the instructions detailed above
I must say thanks to you for releasing the alpha for me to play with!!!
Thanks again JJ
P.S. is it ok to PM you i have afew questions that are off topic here!!
Regards
Bennec83
OK, this all sounds promising, but are you saying that you still cannot use your finger to do anything? That everything still needs to be done via buttons? Can you use your finger to scroll thru lists? Its progress that it is working at least, but isn't being able to use your finger the whole point? Or perhaps I'm misunderstanding you.
jomo25 said:
OK, this all sounds promising, but are you saying that you still cannot use your finger to do anything? That everything still needs to be done via buttons? Can you use your finger to scroll thru lists? Its progress that it is working at least, but isn't being able to use your finger the whole point? Or perhaps I'm misunderstanding you.
Click to expand...
Click to collapse
Dude,
First Point: it is 6:36am i have been messing with this thing since 4am, i have a disertation to research and im taking time out to do this, everyone on almost every forum(Trinity, Wizard, Hermes, other sites etc etc) wants this working, and we have it!!!
Second Point: This is an ALPHA RELEASE that basically means it only works sometimes, i have sat here installed checked it works, flashed my f'ing phone with the Shadow ROM, so there was nothing there that could possible help this work and installed it again.
Third Point: Yes the idea is that you use your finger for everything, but as the second point states this is an ALPHA, later releases will have this im surebut for now i appologise for not sorting that but im tired, y dont you try and get it working with your finger? (that wasnt ment to sound perverse but it does!!!)
i keep getting the black screen no graphics? please help ?
bennec83 said:
2) The hardware button rotates the screen as well as starting touchflo, this might not sould like much but, for example, if the last screen you were looking at was the Music/Photos/Videos page and you pressed the red call end button to get out of TouchFlo, and you want to go back to the Music/Photos/Videos page, you will press the hardware button to start TouchFlo, but at the same time as starting it, it also rotates the screen so it is on the page after the last page you were using, resulting in needing to press the hardware button once to start TouchFlo and twice more to get back to the screen you left off at.
As i said these are minor but this should work for now untill it is properly sorted out
Click to expand...
Click to collapse
Why not use the scroll weel for that? Like> up is forward and down is back
leoiden said:
i keep getting the black screen no graphics? please help ?
Click to expand...
Click to collapse
if you can give me 15 mins i have jus run into a problem with my install method, ive jus installed an app and it totally fubar'd it, now i get nothing at all!!! jus give me a sec, ill pm you wen i sorted if you like?
Bram87 said:
Why not use the scroll weel for that? Like> up is forward and down is back
Click to expand...
Click to collapse
Good question/idea!! do you know to implement that?
once i SR
it gives me blank screen again
I m running on LSVW rom
the cube
the cube works perfectly with this rom... i got no slow downs, no need to delete files or anything like that, all you need to do is map a key to touch flo
http://forum.xda-developers.com/showthread.php?t=312604
leakwoon said:
once i SR
it gives me blank screen again
I m running on LSVW rom
Click to expand...
Click to collapse
i think the thing you will find with this is the fact that this is deoendant on the ROM used too!! i cannot provide support for this i dont really know the ins and outs of it, i just posted what i did to get it to work!!!
the official link for problems and developing is here:
http://www.4winmobile.com/forums/htc-hermes/10127-touchflo-alpha-testing-discussion.html
if you read this it seems that the functionality of this is very dependant on the ROM
sgabriel001 said:
the cube works perfectly with this rom... i got no slow downs, no need to delete files or anything like that, all you need to do is map a key to touch flo
http://forum.xda-developers.com/showthread.php?t=312604
Click to expand...
Click to collapse
hard reset your phone!!! if it works then you are ok, if you get a black screen get back in the boat with the rest of us!!!
bennec83 said:
hard reset your phone!!! if it works then you are ok, if you get a black screen get back in the boat with the rest of us!!!
Click to expand...
Click to collapse
i just got it to work with Black Shadow.. but a few hours ago i installed Shap's rom and i installed touch flo and it worked perfectly, i didn't had to delete any keys or go into /windows folder or any of that stuff with schap's rom
another thing* for those of you having problems, try installing the audiomanager today plug in to see if you get different results, i have noticed that whenever the plugin is not in the today screen the cube seems to not work*
I assume this only works on a Mobile 6 Rom, and not on Mobile 4 (WM2003SE)
VoodooBOB said:
I assume this only works on a Mobile 6 Rom, and not on Mobile 4 (WM2003SE)
Click to expand...
Click to collapse
you assume right
sgabriel001 said:
i just got it to work with Black Shadow.. but a few hours ago i installed Shap's rom and i installed touch flo and it worked perfectly, i didn't had to delete any keys or go into /windows folder or any of that stuff with schap's rom
another thing* for those of you having problems, try installing the audiomanager today plug in to see if you get different results, i have noticed that whenever the plugin is not in the today screen the cube seems to not work*
Click to expand...
Click to collapse
This uses HTC audio manager so the audio plugin shouldnt matter, i have just done a sprite restore after my F*** UP, and after a hard reset it is givin me the black screen again.
Im getting really P*ssed off with this i aint slept yet, i cnt let this stupid thing beat me
bennec83 said:
This uses HTC audio manager so the audio plugin shouldnt matter, i have just done a sprite restore after my F*** UP, and after a hard reset it is givin me the black screen again.
Im getting really P*ssed off with this i aint slept yet, i cnt let this stupid thing beat me
Click to expand...
Click to collapse
lol give installing the audio plugin a try just to see what happens, if it doesn't work just delete it but if you really are that desperate install schap's rom just for a minute and try it there
sgabriel001 said:
lol give installing the audio plugin a try just to see what happens, if it doesn't work just delete it but if you really are that desperate install schap's rom just for a minute and try it there
Click to expand...
Click to collapse
Doesnt work, i dont get y someone doesnt just fix this f****** thing, 12 hours i have sat here with this, it is 8am this was a night not worth trying to help out, i understand now why people ignore you, i stupidly took a look at this coz so many people were moaning about it, i know now why i shouldnt bother 12 hours and so many attempts for nothing
not even microsofts releases have this many problems this is a joke
I've started a new Google Code page for the "Kaiser-Hero" project.
Please note that I'm NOT personally developing anything, as I don't have such time or knowledge, but I'm grabbing the latest builds from current developers and I try to make the best combination for Kaiser. Credits go to the coders!
Also I'm optimizing default.txt for Kaiser but please *read* the Known Issues.
Our project link is http://code.google.com/p/kaiser-hero.
I would be very happy if the current Vogue (vogue-android and vogue-hero) developers would give me a hand in order to keep this functional!
Please post any issues here or on the Google Code Issues section (http://code.google.com/p/kaiser-hero/issues/list).
Cheers!
Bundles list - check post #2
Known problems and fixes - check post #3
Short low-quality demo: http://www.youtube.com/watch?v=8xVYcFZiYgE
Latest bundle:
- 20.10.2009 / 13:45 (GMT+2) - http://kaiser-hero.googlecode.com/files/kaiser-hero-20-10-2009.zip
Files used:
Bundle from zImage-kb7sqi, system-mlign2.5.7.sqsh, rootfs.kb7sqi.3.img and some files from basefiles-20091009.zip.
Changes in this bundle:
- WiFi finally functional!
- way faster port;
- finally a stable port;
- new HERO widgets;
- new soft from Google.
Older bundles:
- 10.09.2009 / 14:30 (GMT+2) - http://kaiser-hero.googlecode.com/files/kaiser-hero-100909.zip
- 08.09.2009 / 21:35 (GMT+2) - http://kaiser-hero.googlecode.com/files/kaiser-hero-080909-1.zip
- 13.08.2009 / 10:25 (GMT+2) - http://kaiser-hero.googlecode.com/files/kaiser-hero-130809-1.zip
- 12.08.2009 - http://kaiser-hero.googlecode.com/files/kaiser-hero-120809.zip
Please post here any mirrors as we'll need them for future archive.
Known problems:
- Front camera - Camera application starts, but shows black screen.
- Back camera - Camera application starts, but shows black screen.
- Bluetooth - Initial work finished, still doesn't work.
- Native Bootloader - Unavailable.
- WiFi - not working on some devices.
Known issues and fixes:
Check this link - http://code.google.com/p/kaiser-hero/wiki/Known_Issues.
Any screenshots mate? Looking quite interesting, Poor I dont have Kaiser anymore.
corepda said:
Any screenshots mate? Looking quite interesting, Poor I dont have Kaiser anymore.
Click to expand...
Click to collapse
Searching Google Market for a screenshot app. Check this thread in a couple of mins.
Later edit: seems like the process of taking screenshots from Android is a little bit...difficult. I need to install the SDK & stuff, so I'm doing a very short (VERY LOW QUALITY!) video demo. It runs ok in my oppinion, for a ported OS! Still, the "standard" Android runs faster.
downloaded and test
sms non sent error but sends sms.
data working after changing apn settings in wireless (I'm on tmobile)
momo254 said:
downloaded and test
sms non sent error but sends sms.
data working after changing apn settings in wireless (I'm on tmobile)
Click to expand...
Click to collapse
Thanks for the feedback! I'm waiting for the new zImage from the coders so we'll have WiFi and data working at the same time. Maybe tomorrow we'll have a better build.
Ok, I've done a VERY LOW QUALITY demo video with HERO on Kaiser. Check this out: http://www.youtube.com/watch?v=8xVYcFZiYgE
looking too cool, I am missing my kaiser now May I know what all things are working & what not?
corepda said:
looking too cool, I am missing my kaiser now May I know what all things are working & what not?
Click to expand...
Click to collapse
Check post #3. Regarding the OS, all the programs I've tried until now (music, pictures, market, etc) are fully functional.
The single problem I have is a laggy keyboard and the fact that sometimes the processor is to slow for the OS (add the fact that the build is PORTED, not native, so it isn't optimized like on the "real" HERO), so you need to wait sometimes for the apps to load.
The rest...is fully functional. I'm using Android for 2 days, and today I had HERO all day running without a problem.
Wow that does look sweeet
Razva do you know how to chage the temp reading in the weather from celcius to farenheight
xxbabiboi228xx said:
Razva do you know how to chage the temp reading in the weather from celcius to farenheight
Click to expand...
Click to collapse
Mnope, no ideea, I don't use the clock + time widget as it slows down the home page VERY much.
I'm also searching for that cool widget that HERO has, with all the faves and their messages. It would be VERY usefull for me, as I kinda communicate with the same people. Any ideas?
tks
Now I'm testing!!! tks
Razva said:
Thanks for the feedback! I'm waiting for the new zImage from the coders so we'll have WiFi and data working at the same time. Maybe tomorrow we'll have a better build.
Click to expand...
Click to collapse
Data is working fine for me so no worries there. The sms not sent bug is annoying but I'll live with it for now
xxbabiboi228xx said:
Razva do you know how to chage the temp reading in the weather from celcius to farenheight
Click to expand...
Click to collapse
tap on the weather portion of the widget> a new screen will pop up> hit the menu button (windows key)> tap settings > temperature scale> fahrenheit
how long does the first boot lasts, because im waiting for 10 min now and the only thing it does is show the hero logo and then it shows the htc logo then shows the hero logo and then the htc logo and so on. Do I have to do something? im using radio 1.71 and an 6.5 rom! Ion builds works ok on my phone
I thought the WIFI has been fixed already on android-1.5-2009-08-08.zip
This works wonderfully, and Sense UI actually works quite well. Thank you for sharing!
Dave
arjen888 said:
how long does the first boot lasts, because im waiting for 10 min now and the only thing it does is show the hero logo and then it shows the htc logo then shows the hero logo and then the htc logo and so on. Do I have to do something? im using radio 1.71 and an 6.5 rom! Ion builds works ok on my phone
Click to expand...
Click to collapse
Check the Google Code website - Wiki - Known issues.
edmondt said:
I thought the WIFI has been fixed already on android-1.5-2009-08-08.zip
Click to expand...
Click to collapse
Yeah...it is...and it isn't... It was fixed by somebody else but after that the coders released another zImage with fixed data, but broken WiFi. So right now it's data vs. WiFi. Still I suppose that it will be fixed in a couple of days. I'll keep everybody posted.
Hello,
I am trying to port HTC Click Rom to my Hero
Done an update.zip of the system and flashed my device. I just:
- commented out QVGA staff in build.prop:
Code:
# View configuration for QVGA
#view.fading_edge_length = 8
#view.touch_slop = 15
#view.minimum_fling_velocity = 25
#view.scroll_friction = 0.008
- changed ro.sf.lcd_density from 120 to 160
i kept my stock kernel (boot.img) and logcat gives me the output attached.
I then extracted the Htc Click boot.img and changed default.prop to
Code:
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=0
ro.debuggable=1
persist.service.adb.enable=1
I rebuilt the boot.img and flashed it: nothing in logcat
Don't know what to do now, any help appreciated.
Regards
so what happened next!, i made a port booted an everyhting but the tattoo rom is trash!
where do you stand now, did it boot for you or anything?
Drizzy Drake Rogers said:
so what happened next!, i made a port booted an everyhting but the tattoo rom is trash!
where do you stand now, did it boot for you or anything?
Click to expand...
Click to collapse
Well still at the same point. Can't run the Click rom. Don't know what to do now. I am learning hard... What have I miss ?
are there some (good) tutorials about on the internet? where did you guys learn that?
Have you replaced the kernel in the boot.img of the tattoo with the Hero Kernel?
Thanks a lot! It works!
Splash screens are in QVGA and I can't enter pin code (no accces to 0 and "ok" key) but it runs
Does it worth building a donut ROM based on Click ? I suppose I must deodex all hero stock app and replace Clcik apps with does? Is it how I should proceed?
Regards.
In fact I "just" want to make a custom hero donut rom to have global search and pptp VPN witch I really need for work.
Hi Gecka, please can you post the dump files (the apps apk)from the htc tatoo rom?
I try to follow your tutorial but Im really a noob in this thing of android.
I really want to use the files to make a better skin for QVGA devices.
PS: If you can post too the fmradio apk I really apreciate.
how are you getting around the problem that there are no android 1.6 libraries for the hero? Telephony shouldn't work, camera won't work, I don't even know that screen will work.
---edit---
Oh, the screen is indeed working?
change the DPI back down to 120 so you can use it. It will suck, I know, because our screens are 160 dpi, but at least all will work as intended.
jubeh said:
how are you getting around the problem that there are no android 1.6 libraries for the hero? Telephony shouldn't work, camera won't work, I don't even know that screen will work.
---edit---
Oh, the screen is indeed working?
change the DPI back down to 120 so you can use it. It will suck, I know, because our screens are 160 dpi, but at least all will work as intended.
Click to expand...
Click to collapse
Well it runs with 160dpi for me.... Does putting it to 120dpi solves the problem that part of the PIN1 keyboard is hidden ?
gecka, have you got an update.zip [tattoo] i can play about with?
lagbaja said:
gecka, have you got an update.zip [tattoo] i can play about with?
Click to expand...
Click to collapse
It's in two parts: the kernel and the system. I wonder why you'll want as it is far from being usable. If it is for cooking a donut ( ), you should have a look at the ADP1.6 thread with has more change to being fully functional.
http://rapidshare.com/files/285909706/clicksystem-signed.zip.html
http://rapidshare.com/files/285908431/clickboot-signed.zip
I do not work on it anymore as for now I am trying to get a custom 2.6.29 kernel.
gecka said:
It's in two parts: the kernel and the system. I wonder why you'll want as it is far from being usable. If it is for cooking a donut ( ), you should have a look at the ADP1.6 thread with has more change to being fully functional.
http://rapidshare.com/files/285909706/clicksystem-signed.zip.html
http://rapidshare.com/files/285908431/clickboot-signed.zip
I do not work on it anymore as for now I am trying to get a custom 2.6.29 kernel.
Click to expand...
Click to collapse
I got it booted and all, but that is as far as I get, Rosie won't launch and the homescreen freezes, probably because they have different screen hardware, the tattoo has a capacitive screen whilst the hero has a resistive screen. The only work that can be done is by merging a hero rom and with bits of the tattoo's donut parts...
so is the kernel you posted the hero kernel to allow it to boot, or the tattoo default one? thanks
behnaam said:
the tattoo has a capacitive screen whilst the hero has a resistive screen.
Click to expand...
Click to collapse
What?"!? I have no doubt the screens are different, but the Hero has a capacitive screen, no question.
kwiksand said:
What?"!? I have no doubt the screens are different, but the Hero has a capacitive screen, no question.
Click to expand...
Click to collapse
No it is resistive and this is not a problem for android to run. Just forget about that port, hardware is too far away from our heroes. Just forget it.
Yeah, thats probably the best gecka until there is a kernel source release
http://www.gsmarena.com/htc_hero-2861.php
Looking at google cache, the HTC page had a reference to it being capacitive too.
kwiksand said:
http://www.gsmarena.com/htc_hero-2861.php
Looking at google cache, the HTC page had a reference to it being capacitive too.
Click to expand...
Click to collapse
My wrong, I meant the other way, hero has a capacitive
gecka said:
No it is resistive and this is not a problem for android to run. Just forget about that port, hardware is too far away from our heroes. Just forget it.
Click to expand...
Click to collapse
Can't be as resistive screens doesn't support multitouch. And this, the hero does - no doubt. Therefore it's definitely a capacitive screen ;-)
Here is Neopeek's frg83 build ported from HTC DREAM (no sapphire) source. I can confirm that bluetooth, wifi, and phone is working.
Please update your kernel if something is not working or if your device is running poorly. For instance, on my touch pro the screen would not wake up from sleep. The newer kernel builds have issues with screen not waking up after sleep.
--------------
Please note that this build works best on diamond100 and Fuze/Touch Pro! Of course it will also boot up on Rhodium / Topaz
--------------
FRG83 R7 Release dated 06-03-2011
Download:
Mirror1
Google Apps Installation (before you boot 1st time!!!):
* Download latest Google Apps here or here
* Create a folder "GAPPS" on your sdcard (FAT32 Partition)
* Extract contents of Google Apps to the "GAPPS" folder
As always: Use this on your own risk!
Thanx go to: Sprut, Balsat, XDAndroid-Project, Martin DZO and everyone else whom I forgot!
Installation:
Installation Instructions (Link) thanx to chase21
Please update your signature! It's always hard to find out which device / smartphone you use and which kernel(s) you are referring to!
-------------------------------------------------------------------------------------------------------
[R6]
R6:
1)http://www.mediafire.com/?t1tf39s8t54id8j
---------------------------------------------------------------------------------------------
[R5]
http://www.multiupload.com/BPRRXOABU0
---------------------------------------------------------------------------------------------
Donate to Neopeek if you like it!
----------------------------------------------------------------------------------------
Original thread here: http://www.neopeek.com/viewtopic.php?f=14&t=2183
You said BT works...? It doesn't work on ANY other build for the TP. Or any other MSM device AFAIK.
So does it pair & just not pass data or audio...? Because that is the status quo.
I'll check it out...
Yes, BT works. I tried pairing with another device and transferring file and it worked.
Do you want me to show you a video of it working?
Still trying to find a kernel that will make bluetooth and call work as in the first build, call would not work but bluetooth would..
e334 said:
Yes, BT works. I tried pairing with another device and transferring file and it worked.
Do you want me to show you a video of it working?
Still trying to find a kernel that will make bluetooth and call work as in the first build, call would not work but bluetooth would..
Click to expand...
Click to collapse
Ah I didn't realize BT works for data xfers, I should try it.
However - BT audio doesn't pass for any of our builds as of yet. Not sure if it's a kernel problem or a system problem...
Love this build data for me RAPH800 works fine. I have never had a stable phone with android but this one so far rocks. i wanted spare parts to remap end key so i put that there but all an all i love it. wifi works but under a load it drops in and out but it does this to me on most builds i still need to look at BT. Thank you for the work!!
updated link again.. Included few more apps and new kernel. Still waiting for phusson to release a new kernel with fixed power button (as it doesn't work right now). If your phone doesn't have a keyboard, please update to an older kernel image that actually has the power button function to wake it up. Otherwise, you can just slide open your keyboard to wake up the screen.
10 HRS OF TESTING
DATA--------------OK
3D----------------OK
3D ACCELERATION---OK
GPS---------------OK
IN CALL-----------OK
OUT CALL----------OK
SOUND-------------OK
INTERNET----------OK
MARKET------------OK
WIFI-------------wpa-OK wep-NO
BATTERY-----------WITH 100%.
KEY BUTTOM-------POWER.OK END.OK SEND.OK MENU.OK VOL.OK
INTERNAL Mic-----OK
EXTERNAL MIC-----NO
VIDEO VOL--------NO
AUTO BRIGHTNESS--NO
keyboard light---NO
KEY BUTTOM LIGHT--NO
BT----------------NO
CAMERA------------NO
WITH
(zImage_20101023_021801---modules-2.6.27.46-01212-ge59fdaf.tar----hw3d.RAR---)
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set cmdline "root=/dev/mmcblk0p2 init=/init rootwait rw rootdelay=3 acpuclock.oc_freq_khz=716800 pm.sleep_mode=2
lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=2,1,3 force_3d=1
force_cdma=1 physkeyboard=rhod400"
boot
really impress with this build. great job NEOPEEK & CHANN
sprint htc touch pro 2 (rhod400)
seems to be the most stable build i have used on my raph...
just one thing though what is the score with the hardware buttons.. they seem to me mapped all wrong . does anyone know how to remap them? i cant get the menu command to work in any section. im sure it used to be a short push of the home key(picture of a house) now i cant find it.
thanks
the battery life is brilliant now on this build for me but going back to the button configs ?? i cant even answer a call. i tried every button to answer and pressing the screen. it seems even doing a vulcan death grip on it i can t answer the call
If you want fully functional buttons, you will have to sacrafice bluetooth becuase of kernel problems..
http://zimages.googlecode.com/files/htc-msm-linux-20100926_001914-package.tar.bz2 <download linked to http://glemsom.users.anapnea.net/android2/htc-msm-linux/
i have all the buttons working except i press the little house(home) on my raph and it takes me back to desktop not the little pop up menu. i can now answer the calls .. i dont really need bluetooth on the android because if i need blue tootch ill just reboot the winblows phone
just looking at that build,, it doesnt mention my phone and /or button mapping in the changelog. how would i get buttons working ..
thanks
hvc123 said:
i have all the buttons working except i press the little house(home) on my raph and it takes me back to desktop not the little pop up menu. i can now answer the calls .. i dont really need bluetooth on the android because if i need blue tootch ill just reboot the winblows phone
just looking at that build,, it doesnt mention my phone and /or button mapping in the changelog. how would i get buttons working ..
thanks
Click to expand...
Click to collapse
HOME now = HOME. I believe the center button is now MENU.
yer that makes sense but the centre button ( centre of the joypad thing) takes me to home too
hvc123 said:
yer that makes sense but the centre button ( centre of the joypad thing) takes me to home too
Click to expand...
Click to collapse
Uhm... that shouldn't happen. Does it happen on the 'standard' XDA builds? Make sure you're using a new kernel/rootfs.
i dont know but other than that this is far the best ver of droid i have tried. im trying to live without the menu for the moment but its getting a little difficult
hvc123 said:
i dont know but other than that this is far the best ver of droid i have tried. im trying to live without the menu for the moment but its getting a little difficult
Click to expand...
Click to collapse
Can't really help you then if you're not willing to respond to my questions...
dude im at work... itll have to wait to try other builds. im in uk
and saying that im not willing to answer your questions christ you sound like my X wife
hvc123 said:
dude im at work... itll have to wait to try other builds. im in uk
and saying that im not willing to answer your questions christ you sound like my X wife
Click to expand...
Click to collapse
Yea, still not sure how you expect me (or anybody for that matter) to help you. Either way, make sure you're up to date as you've been told before. If that fails, try XDAndroid to see if that resolves it.
tell you what mate forget it.
i was originally asking how to remap hardware buttons as my menu does not work.
i will try l8r builds when i get home and not here at work as i dont have the capabilities to put the stuff on my phone here.
again you write like my x wife writes emails. i dont "expect" anything i was mearly asking a question.
when i tried xandroid 2.1 the menu button was the home button. that was the last xandroid build i tried.
i may as well get the source code and edit the button config myself then build it.
does any one know before i go on a hunt if there is a build root for the uk raph ?
hvc123 said:
tell you what mate forget it.
i was originally asking how to remap hardware buttons as my menu does not work.
i will try l8r builds when i get home and not here at work as i dont have the capabilities to put the stuff on my phone here.
again you write like my x wife writes emails. i dont "expect" anything i was mearly asking a question.
when i tried xandroid 2.1 the menu button was the home button. that was the last xandroid build i tried.
i may as well get the source code and edit the button config myself then build it.
does any one know before i go on a hunt if there is a build root for the uk raph ?
Click to expand...
Click to collapse
Sheesh, you act like I'm asking for alimony or something. Anyhoo, here's the source tree for the rootfs. Remapping buttons isn't very straightforward, but you seem aware of what needs to be done.
[ROM][2.2.1][Sense]AnthraX - "Resistance is futile, you will be intoxicated"[BETA]
AnthraX - "Resistance is futile, you will be intoxicated"
Ported from:
Using Flykernel 13
Ported from HTC Hero CDMA froyo ROM by zenulator = http://forum.xda-developers.com/showthread.php?t=834840
Problems:
GPS
Camera, open and see, it takes awsome pictures, artistic...
Notification LED and buttons backlight aren't working
Power menu shut down wont actually shut down the phone (LOL)
It'd be cool to have a reboot to recovery, fastboot menu..
Report if you notice any more bugs
If there are any devs that know how and are willing to fix some of these bugs, be my guest, if you manage to fix them post a patch and I'll incorporate them into the ROM
How to install:
---Download the rom and put it on your SD card
---Reboot to clockworkmod
---Wipe data, wipe cache
---Go to advanced tab/Wipe dalvik cache
---Flash the ROM
---Reboot and say hello to your new ROM
Tips:
Get Antutu CPU Master from market and overclock as much as you can, like always, change governor to smartassV2..
Get Spare Parts from market, open Spare parts, window animations and transition animations, set both to very slow, it will give you an animation that is slow till the app you wanted loads, nice trick for your brain
Credits:
---zenulator (His awsome CDMA ROM)
---1ceb0x (Helped me with speeding this up)
---Me
Download links:
http://goo.im/devs/Enverbalalic/AnthraX-FroYoHero-kemoba.zip
Screenshots:
None so far
Project update, started working on a new version, i wont release till im 100% sure everything is working, maby some of you will get a PM with a pre-release version just to help me test, currently working on the camera, i have no idea what is wrong
Downloading right now thanks for this bro, i cant wait to try this
Can't wait to dust off my Hero and try this. It's been so long since I flashed something
Sent from my HTC One X using xda app-developers app
http://forum.xda-developers.com/showpost.php?p=34154779&postcount=829
Aha! I was right !
Are GPS and camera gonna be fixed in next release(s)? Or no hope to get that working?
No problem with bluetooth?
Camera and GPS are fixed in herolatte: http://forum.xda-developers.com/showthread.php?t=1026699
maybe this could help you or just ask erasmux if he is still here
Bluetooth is ok, im aware of herolatte, im going to try to use some stuff from it, hopefully we'll get a 100% functioning ROM in a next couple of days, if some of you can test this and report if there are any bugs please
"Doing some boring stuff"... ^^
I'm about to try.
2 more issues :
- Notification LED and buttons backlight aren't working
- mobile Data gets on by itself
Your ROM is very fast. Good work, dude. Keep on doing great job.
pirlouit2 said:
2 more issues :
- Notification LED and buttons backlight aren't working
- mobile Data gets on by itself
Your ROM is very fast. Good work, dude. Keep on doing great job.
Click to expand...
Click to collapse
Thanks, you would like data to be off by default ???
kemoba said:
Thanks, you would like data to be off by default ???
Click to expand...
Click to collapse
No, problem is that if you put it off, it gets on randomly by itself...
Great work on getting this up on the forums, kemoba!
Guys, give you the full support for this because he needs it, he's prolly the last developer for Hero (until I come back ).
1ceb0x said:
Great work on getting this up on the forums, kemoba!
Guys, give you the full support for this because he needs it, he's prolly the last developer for Hero (until I come back ).
Click to expand...
Click to collapse
Thanks man, this could be my last ROM for Hero so i'll try to make it awsome
I would really like to use or at least test this ROM but I really use both GPS and camera so
I hope that gets cleared so I can use it :good:
I took it for a spin, but when I push the button to lock the screen, the phone freezes. I left it for 10 min, but there was no change. Also i left the screen to turn black by itself but the phone became unresponsive after that. Is anybody experiencing anything like this?
f1r3fl3x said:
I took it for a spin, but when I push the button to lock the screen, the phone freezes. I left it for 10 min, but there was no change. Also i left the screen to turn black by itself but the phone became unresponsive after that. Is anybody experiencing anything like this?
Click to expand...
Click to collapse
The clock is probably too high for you, i'll set it lower in the next version, sorry about that...
kemoba said:
The clock is probably too high for you, i'll set it lower in the next version, sorry about that...
Click to expand...
Click to collapse
Thanks!
AFAIK my Hero can run at 691 mHz max frequency.
f1r3fl3x said:
Thanks!
AFAIK my Hero can run at 691 mHz max frequency.
Click to expand...
Click to collapse
I think it's 633, or 572, what recovery are you using, did you do a full wipe, did you flash any different kernels or anything ?
kemoba said:
I think it's 633, or 572, what recovery are you using, did you do a full wipe, did you flash any different kernels or anything ?
Click to expand...
Click to collapse
I'm using the latest Amon Ra recovery (I think it was 1.7 or sth). I wiped everything, and i flashed just the rom, nothing else. I flashed it twice, first i thought it was a bad download or sth, but the checksums were correct.
Also I needed to sign it, because at first the rom failed the check. I used Auto-Sign_v0.65 Maybe this can cause an issue?