I use this tool without an expected goal, I use another one (PPCW.net Extended_ROM_viewer) with same effect andfinally I did changes in registry manually, but still without effect. Where should be the problem?
ROM 1.72.00WWE
Radio: 1.17.00
Protocol:1337.28
ExtROM: 1.72.901
What do you expect and what do you get?
Can you be more specific about what isn't working?
Mark
to: markutah
Described applications has clear functionality: to show Extended_ROM directory (lock, unlock too, of course). I want copy .cab files to pc and cook my own ms_.nbf.
So after aplying these tools nothing happens, no directory shows in root of my XDAII. Why? Can you help me with this mess?
Did you soft reset your device after applying the unlock tool?
If not then do a soft reset. If yes then do the following to read the content of your extended rom:
Go in the registry to
HKLM\system\StorageManager\Profiles\TRUEFFS_DOC
Change the key MountFlags to 0 (= zero)
Soft reset your XDA II/QTEK2020 etc
In the file explorer a directory Extended_ROM will show up. Now you will be able to copy the content of your extended rom.
Note that your extended rom is not unlocked so you will not be able to write something to the extended rom. As you've stated you're going to flash your rom then this will not be problem I assume.
Mark
to markutah
you didn´t read ny first post carefully - i did it already hudret times manually or with tools, but nothing happens. No directory shows. I´m not rookie user, but now i´m on the end with my power and nerves.
I used copyying rom through bootloader and usb terminal to sd card, but format of data is not readable for Windows PC....see http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=62&PN=1
Sorry that my attempt to help you works on your nervers and sorry that I was trying to help you.
mark
to: markutah
today seems my mood better, (because i found somthing about that problem) so sorry about my reaction, for a little apology i´m writting what i find out:
so i had ROM version 1.60WWE as original one with Radio 1.12, devide with CDL oerator. I was upgrading ROM many times (ROM, ExtROM, Radio together and separatelly too), but new ROMs was still from CDL operator. Last time I upgraded ROM to 1.72WWE, Radio 1.17 from TMobile, and I couldn´t do any change in registry with sucsess. My registry data stand changed, but nothing happens. (for example: i tryied to show Orange logo in Phone to substitute title ORANGE (in right up corner) withouth sucsess, and that ist far easier operation that this we are talked before (see http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=80&PN=1 - you are orangeman too, so change yours logo , when you don´t have it yet.)
finally i have no idea how to fix it (without downgrading ROM) and i´m not 100% sure if this is the point of problem, but i gues. bye
hi guyz need your help who ever was succesfull upgrading 2495B from WM5 to WM6. I searched and tried all methods that was posted in here. but no luck. I also tried this method :-
" worked for me. 2490 device was shipped w/wm5 1.02h
Please Note: As of 10/8/07 there are 2 confirmed working roms for hx2*** series ipaqs. So far the pdaviet version is more stable, less activesync issues, preinstalled software ie: psshutxp and much more. (could use more feedback from others on this)
As promised: Here are the steps
-take out any cf/sd cards you might have installed. grab your cradle AND ac power cord (no AC cord = no flashing for you)
-put device into normal boot loadermode and downgrade to 1.0h w/files from hp website.
-format the p.s. (fyi everyone misses you have to HOLD DOWN the keys for p.s. format for like 4 or 5 seconds and THEN it will activate) After p.s. format wm5 will start.
(!! Start below this line if you are performing a wm6-4pda to wm6-pdaviet upgrade or vise versa !!)
-put device into WHITE bootloader mode and again run the 1.0h rom setup. When you arrive at the screen that asks "update" or "cancel",
1. rename the wm5.xxx.nbf to wm5.xxx.nbf.old
2. rename the new wm6.xx.nbf from the 4pda.rar/pdaviet file to whatever your wm5-wm5.xxxx.nbf was called (before you added the .old to it)
-NOW hit update. You shouldnt get any errors.
-After update wm6 wont start properly until you again format the p.s. (remember to hold down those keys to start) once this is done
-you should be golden.. with a working copy of wm6 on your wm5 deivce.
"
I have 1.02h in my pda, But i can not downgrade to 1.0h I am getting msg that " Image Low Version " Please help me upgrade to WM6
come on guyz !! No one
longhorn2006 said:
come on guyz !! No one
Click to expand...
Click to collapse
YOu dont need to downgrade, I have a 2490b and I coudlnt get the downgrade working either. I am now running viets wm6
try this
try the universal bootloader method
http://forum.xda-developers.com/showthread.php?t=329079&page=16
I download the WM6.1 from following link:-
http://forum.xda-developers.com/showthread.php?t=383173
but my unit was dead after flashing the ROM.
- the unit can turn on but never ending on the startup screen.
- the unit can enter BootLoader but the computer can't recognise it, so i can't re-flash it any more.
I have tried to uninstall the ActiveSync and re-install it but helpless.
Can anyone help?
Thanks.
No Panic
tangwd898 said:
I download the WM6.1 from following link:-
http://forum.xda-developers.com/showthread.php?t=383173
but my unit was dead after flashing the ROM.
- the unit can turn on but never ending on the startup screen.
- the unit can enter BootLoader but the computer can't recognise it, so i can't re-flash it any more.
I have tried to uninstall the ActiveSync and re-install it but helpless.
Can anyone help?
Thanks.
Click to expand...
Click to collapse
Many people experienced identical problems with hx2110/2115/2410/2415, wm2003se, having 64MB Rom, when try to upgrading wm6.0/wm6.1
Come here, no Panic......
http://forum.xda-developers.com/showthread.php?t=383173&page=36 info in post #353
You must read carefully to understand the guides in further Threads introduced, and proceed with patience...
Sure you'll make it.....Like me....hx2110 to any wm6.1
HKKSL, YOUR ADVISE IS REALLY HELP,THANK YOU VERY MUCH.
Upgrading HX2110 to WM6
--------------------------------------------------------------------------------
Okay, I've finally got WM6 on my HX2110. For any other people having the same problems I did, here is exactly what I did. What the guides I've found don't tell you is where to find it, and what to do when you get it. Basically you need to trick the iPaq into thinking it's getting the original 1.00.00.l firmware and then switch firmwares. You need to downgrade to the original H firmware before the iPaq will accept wm6. This worked perfectly for me after two days of trial and error. More detailed steps are below, but basically its: flash with 100l, reset, run 100l and swap firmware with 100h, flash, run 100l and swap with wm6, flash
Prerequisites:
Advanced_pack_for_hx2xxx_to_WM6
iPaq HX2110
USB connection to computer
1) Hard reset iPaq. Do this by holding the calendar button and itask button (curved arrow), and then put your stylus into the reset hole on the bottom of the iPaq. This will hard reset it.
2) After doing that, put it in to bootloader mode. You do this by holding the contact button (to the right of the calendar) and the itask arrow, and then clicking the reset button on the bottom. It should now be in bootloader mode. unplug the power/usb cable and plug it back in. hit the calendar button. it should now say USB.
3) run hpRUU.exe under the Wm5.0 for hx2000_1.00.00.L_ENG folder. It's found in provishki. it will flash your ipaq to 1.00.00.l . let it flash all the way.
4) hard reset the ipaq and put it in bootloader mode. see steps 1 and 2. make sure it says USB.
5) do step 3 again, but this time don't click upgrade. rename the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file to 100l.nbf
6) go into the SP32408_1.00.00.H_ENG folder and get the NBF file from there. copy it into the 1.00.00.L folder that we were just in. rename is to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf. click upgrade. let the upgrade finish.
7) repeat steps 1 and 2.
8) delete the E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf file that you just copied over and rename the 100l.nbf file to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf.
9) run hpruu.exe again. DO NOT CLICK UPGRADE.
10) get the wm6_wwe.nbf file and copy it into the directory we were just in. rename E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf to 100l.old and wm6_wwe.nbf to E1_Upgrade_ROM_v1_00_00_L_SIGNED.nbf
11) click upgrade. let it finish.
12) repeat step 1
you should now have Windows Mobile 6 on your iPaq. Good luck
--------------------------------------------------------------------------------
Last edited by jsbarone : 29-02-2008 at 05:06 AM.
Click to expand...
Click to collapse
Complete package for upgrade hx2xxx to WM6
--------------------------------------------------------------------------------
Inside:
-WWE-hx2000_PPC03_downgrade for return to WM2003se
-Wm5.0 for hx2000_1.00.00.L_ENG
-Wm5.0 for hx2750_1.00.00.L_ENG
-SP32205_1.00.03.H_RUS
-SP32205_1.00.03.H_RUS
-SP32408_1.00.00.H_ENG
-SP33003_1.02.00.H_ENG
-WM6.0_5.20.00.H_ENG
-Terminal_RDP
-Quarta
-hx2x90b_Mui_Quarta7
http://depositfiles.com/en/files/1799963
Click to expand...
Click to collapse
I have succeed in upgrading my hx2110 to wm6.1 as per the above instruction.
I am wondering why there's extra files and folders in that package that we never used it?
Hey guys,
I have no idea what's going on. I appreciate your suggestions. I flashed my Diamond many times (and other phones as well) with most of the ROM available. Unit a month ago or so I've been using the official 1.93 ROM with previously installed hard SPL 1.40. When I attempted to install a new 2.03 ROM I went through the whole procedure same way as always with a little exception. Right after completion - 100% the unit reboots, shows the rainbow screen with a message "Upgrade ROM code error" - try again. What is the world is this? I also have a message on my desktop "Error 270-update error" - The image file is corrupted. My unit is european and I downloaded the ROM from both US and Euro sites. From this point I managed to downgrade again to version 1.93. Then I ran again the hard SPL 1.40 and reattempted to upgrade to 2.03 - SAME THING!
I don't know what to do next. Why I cannot flush it with the latest ROM? Any ideas or similar situations? Please see picture.
Thanks
Same Thing happened to me :S wtf??
xevier69 said:
Hey guys,
I have no idea what's going on. I appreciate your suggestions. I flashed my Diamond many times (and other phones as well) with most of the ROM available. Unit a month ago or so I've been using the official 1.93 ROM with previously installed hard SPL 1.40. When I attempted to install a new 2.03 ROM I went through the whole procedure same way as always with a little exception. Right after completion - 100% the unit reboots, shows the rainbow screen with a message "Upgrade ROM code error" - try again. What is the world is this? I also have a message on my desktop "Error 270-update error" - The image file is corrupted. My unit is european and I downloaded the ROM from both US and Euro sites. From this point I managed to downgrade again to version 1.93. Then I ran again the hard SPL 1.40 and reattempted to upgrade to 2.03 - SAME THING!
I don't know what to do next. Why I cannot flush it with the latest ROM? Any ideas or similar situations? Please see picture.
Thanks
Click to expand...
Click to collapse
Hi have you tried to flash from the internal storage?
Have you tried flashing with internal storage method?
Exactly the same problem here, so I tried to flash to a really old original HTC ROM after the failure and it flashed fine
So I thought I would try upgrading over the top of an original ROM, had the same error , bloody HTC
So, any ideas how to resolve this issue? Are we stuck with the old ROM? I'm glad that I'm not the only one experiencing the same problem.
No, I have never tried to flash from internal storage. How can this be done? do I copy the whole .exe file to storage and run from there? Any pre-cautions?
Thanks
Though I bricked my phone when it happened, never seen that error before despite many ROM flashes
I have now tried tommytaos ROM which is supposed to be very close to the original but some with some tweaks.
http://forum.xda-developers.com/showthread.php?t=479049
It installed just fine on my phone. Seems HTC have broken their ROM
xevier69 said:
So, any ideas how to resolve this issue? Are we stuck with the old ROM? I'm glad that I'm not the only one experiencing the same problem.
No, I have never tried to flash from internal storage. How can this be done? do I copy the whole .exe file to storage and run from there? Any pre-cautions?
Thanks
Click to expand...
Click to collapse
it's the best way to flash the rom and the safest...
From Suiller thread:
the standard procedure to cook a ROM is made trough activesync program, I mean that the .nbh file is pushed into the phone trough activesync, across the usb cable, but this procedure can give some troubles:
1. it takes long time, about 10 minutes
2. it's a bit unsafe (even if the procedure can be always restored safely)
3. it's possible only with Windows OS (NO Linux nor *BSD, et cetera...)
I don't know why this is not well known but ALL producers (like HTC) give the possibility to upgrade the rom/firmware without having MS windows (thanks GOD someone knows that there aren't only windows users).
This faster procedure can be done also with *nix variants (or whatever you use) because the ROM update is made directly by the phone.
The procedure is very simple, it will take just 2 minutes, can be done everywhere & is good for cooking radios too (very fast in this case)
-= COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
notes:
* be sure to have at least 10/20% of charge, anyway the whole procedure will take about 2 minutes, so you must be ensure that your mobile will stay turned on for at least those 2 dirty minutes (just in case you can attach the power AC/DC too), don't panic if something goes wrong... read few lines below
* like told you above the same procedure is good for cooking Radio too, of course Radio are smaller and it will be really fast (about one minute!)
* you don't need windows anymore or activesync, is enough just to copy the file into the storage card (transfers WITHOUT activesync are faster)
* it's possible to make a reset simply by getting off the stylus and pressing the small red button under the stylus carrier
* don't worry if something goes wrong... any cook failure can be always restored, the important thing is that you don't fail hardspl flash... but you have to do it just one time in your life
special note about hard-spl:
if you have signed-only hard-spl I strongly suggest to upgrade to an un-signed one, personally I tested many & I can confirm that the "good ones", at least in my experience, are the Olinex 1.37 or 1.93, you can find a copy here
remember also that you can NOT brick your device if you have a good hard-spl (like the ones I mentioned above) & flashing directly from phone is really faster (also good for flashing radio)
so the only one thing you should take care is when you change/upgrade the hard-spl, but you have to do this step just once, I'm using this hard-spl from about 6 months & I was able to flash everything (plus dozen recovers for failed flash)
for rom/radio upgrades you can safely also reboot/remove cable/turn off your phone while flashing ...every lost flash can be always restored safely, it's enough to restart your device in boot mode & restart flashing, also with cable trough the classic RUU (to put device in boot mode simply reset & keep pressed Vol_Down button)
In the hope this procedure can be useful at least to save time
if you have the official rom which is a exe file you can extract the rom file using winrar.
EUREKA!!! Done Deal!!!
Flashed from Internal Storage as per following directions:
-= COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
THANKS! THANKS! THANKS!
Flashing using the Internal Method is the safest and most convenient way to flash. Spread the word.......
xevier69, Thanks for your thread
Having just purchased Oli's security unlocker... I was annoyed about this problem with a HTC official rom!
But your method has solved this issue!
Thanks again
Thanks guys it works perfect!
This just happened to me too and the only roms i have ever flashed:
1.37 official spanish: came with the phone
1.37 official WWE
1.93 official WWE
and now 2.03 official WWE fails.
WTF... One would expect the upgrade not to fail, right?
I wonder if they are checking for HardSPL to be original too!?
Anyway thanks for the workaround
This worked for me to
Cheers
xevier69 said:
EUREKA!!! Done Deal!!!
Flashed from Internal Storage as per following directions:
-= COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
THANKS! THANKS! THANKS!
Click to expand...
Click to collapse
Thers some other option
Install twice from activesync 1st time = error, run for the second time the same version and OK it updates.
At least with my Diamond had worked
Cheers
Hi!
The same thing happend to me too... I think it's because of the serial number we have entered when we have downloaded that 100 MB ROM Update file from the HTC support site... well i think it doesn't match with the serial and IMEI of the phone that the upgraded rom checks at the end of the update process... so i think it's kind of a protection against piracy developed by htc... taiwanese idiots!
Hi!
pls anyone send any information about an rom update file that works and doesn't report errors after it installed 100%. pls specify it's rom version too! 2.03 would be great
thanks in advance
miriamscorob said:
pls anyone send any information about an rom update file that works and doesn't report errors after it installed 100%. pls specify it's rom version too! 2.03 would be great
thanks in advance
Click to expand...
Click to collapse
read all posts please
works like a charm folks! thank you!
g0x said:
Thers some other option
Install twice from activesync 1st time = error, run for the second time the same version and OK it updates.
At least with my Diamond had worked
Click to expand...
Click to collapse
I made this too for testing First flash: Error, Second time: Ok
Hii all,
actually this my first post in the forum and i hope to find the solution to my small prob.
The problem is appearance some words on the jasjar screen like "usb" n "serial"
they doesn't disappear although i 'v done "reset" n "Power+reset+backlight"
They are permanently appear on the screen and make my jasjar as dead ..
----
actually i've open the rom upgrade icon from the mobile directly and i didn't use the pc at all because i didn't know how to upgrade it
----
please if someone know the solution of this prob. tell me >>
n i want to know how to upgrade the rom if i already downloaded it >>
Welcome to forums
have a read on my signature link and check for usb connection
Moving to upgrade section
Please orb or anyone can help >> ):
I want the software of the jasjar which come with the installtion cd ..
I tried to join the jasjar with the pc but there's a problem with the usb ..
Plese help me as my mobile now like dead body
Thanks In Advance ;
Hello,
First instal ActiveSync 4.5 in PC. - if not already installed
Code:
http://www.softwarepatch.com/windows/activesync.html
Then in settings in (ActiveSync) disable (NOT check): "allowed to connect to one of the following port" and "Allow connection to USB".
Perhaps the translation is correct. I use the CZ version. But it's second and third check box.
Now
This works for when the Universal is in Bootloader and Windows Mobile.
1. First download the ROM you want to install.
2. Extract it to a folder (use winar or other extraction software).
3. There will be up to 3 ROMs in the package: ms_.nbf (Extended ROM), nk.nbf (OS ROM), radio_.nbf (Radio ROM)
4. Delete those which you don't want to install. (If you just want to upgrade the radio rom for instance delete ms_.nbf and nk.nbf and leave radio_.nbf.)
5. Download UniversalRUU.zip
6. Extract it and copy into that folder the nbf files you want to install.
7. Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. And plug to PC. Wait few seconds.
8. Doubleclick ROMUpgradeUt.exe and follow the instructions
9. When the upgrade is finished pull out the USB cable from the Universal.
10. You will need to do a soft reset OR hard reset depending on the situation. (note: some say do a soft reset / others a hard reset .. possibly someone with more knowledge could correct me here, but until then it's best to investigate the matter for yourself on the forum.)
11. To do a hard reset (push the two menu buttons ("-") on the keyboard + the reset button at the same time (all of this three). Doing a hard reset will result in you losing all your installed apps and data so ensure you have a backup of everything first.) Everything should be fine from this time. You have to calibrate the screen and do some tutorial...
12. If after doing a hard reset you want your Universal not to install the extras from the Extended ROM wait untilsetup is complete and then do a softreset when the popup window appears (you have 3 seconds before it installs ExtendedROM)
For a long time I have not installed the new ROM. I remember so I proceeded as follows
Greetings
Svobi
Really I don't know how to thank u
Thread closed as problem got solved