Hi,
I'm posting this issue second time. I have a class 2 SD card with almost 1700mb of ext3 partition. the problem is that my SD turns to read only when accessing some files from my sd card. it says in the notification SD card mounted as a read only and then say "tap" to resolve the card responded unexpectedly.
tapping on it sometimes help if i remove the files that I was trying to access that created the problem. otherwise it mounts it as read only.
Hi, you sure your card is a genuine one? The problems you are having are identical to what I had. Turns out my 32gb card was in fact an 8gb card, and the problem was when capacity was reached it would go to read only. The only way to rectify this was to take the card out, place it in my PC card reader right click on properties of the drive and run the error checking tool. Hope this helps. Got my money back anyway thought £36 was a bit cheap lol! Try writing a large file to the card using your Computer, this should give you an indication if the card is genuine or not.
lewyharvey said:
Hi, you sure your card is a genuine one? The problems you are having are identical to what I had. Turns out my 32gb card was in fact an 8gb card, and the problem was when capacity was reached it would go to read only. The only way to rectify this was to take the card out, place it in my PC card reader right click on properties of the drive and run the error checking tool. Hope this helps. Got my money back anyway thought £36 was a bit cheap lol! Try writing a large file to the card using your Computer, this should give you an indication if the card is genuine or not.
Click to expand...
Click to collapse
Card is genuine. I have placed my card several times in my brothers htc hd and formatted it through windows. its almost 8 gb i checked it on windows. last time I deleted a folder which has wiered name as if the folder was corrupted. I deleted that folder n it was running fine again. but its back again.
mine came with telus, so it should be genuine. what does class signify? like i have class 2, what does it mean?
CLass is the speed of read and writes.
I recently had a problen like this it turned out to be a corrupt file in the .secure folder used for apps to sd.
rchatburn said:
CLass is the speed of read and writes.
I recently had a problen like this it turned out to be a corrupt file in the .secure folder used for apps to sd.
Click to expand...
Click to collapse
then I guess its because of corrupt files but why is it so often specially when I copy something from windows.
I had this problem once after disconnecting from a Windows PC, simply connect the sd car directly to a computer and run the windows verification tool, it finds the corrupt file and your sd card starts working again
hey i recently had the same problem ,, but i figured it out and this method should work fine...!!
>First of all you should know how this problem has occurred..??,
well the reason is, we all connect the phone to system in usb mass storage mode ,,but while removing we'll only give safely remove in the system and forget to do the same in the phone ,,,trust me this the core for this problem....sd-card cannot be fully unmounted by system ,,, so you have to manually do this by your phone
so if you are using the sense rom ,,after ejecting the disk in the system ,,,in your your phone's notification area
in ''connect to pc'' menu select charging only .....this will completely unmount your memory card .
>if you are using non sense rom ,,"turn off the usb" mass storage
do this every time you connect your phone to the system ..!!!
ok now solution for your problem..
>reboot your phone to recovery mode using rom manager...
>select partition menu
>now select mount usb storage ,,,
>now you have tow options
1. either you backup every thing and format your sd-card (recommended)
or
2.mount your sd-card and check for errors in windows,,,
this should fix your problem ..
remember ,,next time when you are connecting your phone don't direly unplug the the cable..!!
qariboy said:
Card is genuine. I have placed my card several times in my brothers htc hd and formatted it through windows. its almost 8 gb i checked it on windows. last time I deleted a folder which has wiered name as if the folder was corrupted. I deleted that folder n it was running fine again. but its back again.
mine came with telus, so it should be genuine. what does class signify? like i have class 2, what does it mean?
Click to expand...
Click to collapse
The Class number represents a multiple of 1 MB/s
So if 2 is written on ur SD card then it means that its capable of a read speed of 3MB/s
>First of all you should know how this problem has occurred..??,
well the reason is, we all connect the phone to system in usb mass storage mode ,,but while removing we'll only give safely remove in the system and forget to do the same in the phone
- Not always true, its happened to me on several occassions when not connected to PC etc... Flickie HD caused mine
If you have a mac the fix is - disk utilities - repair card
Full format I found to be better though
Related
I decided to replace the 512 MB card in my Cingular 8525 with a 2 GB card. When I put the 512 card in its adaptor, the PC read the directory, showed a FAT format, but would not copy/read/or otherwise manipulate any of the files. I plugged the card back into the 8525 and found that it couldn't even see it. Giving up on any kind of file recovery, I tried to reformat it in the PC, but then IT couldn't detect the card! After I played with it awhile, I finally got it to start the format process, but it always failed just before the "green line got to the end" and, after several attempts, it reported "disk cannot be formatted."
Is there any way I can save this card, or is it a (VERY small) boat anchor?
I've seen yesterday in the Sandisk site and somebody told me that they have some kind of software tool (file recover, unformat, etc.), that's very capable, unfortunately it is not free, there's a trial version (does not allow to save any files). Sofware's name is "Rescue Pro", if you can get yourself a copy you might give it a try.
Another thing about an SD (in my experience), I'm talking about a Verbatim 512MB SD, i borrow it to a friend, when he was giving it back, just cancelled all his things up, stopped the card reader (from XP), extracted the SD and it was dead, fortunately I had kept my proof of purchase and they (Verbatim) exchanged it with a new one (in europe the warranty is at least 2 year long), they asked me to send it to Ireland to check if it could be recovered and within three weeks (just because there was christmas in the middle) I got a new one back.
hope this helps
Try putting it in a Digital Camera with SD Slot (put in SD Adapter first;-))
Then format it via your Digital Camera
Or
Download VaioSoft Recovery Manager and try to format with that one
http://vaiosoft.com/products/recoverymanager.htm
Eelcol
that link is not working please post another link for that software
What PQI support suggests
I´ve had trouble with PQI miniSD cards, so I asked support from PQI on corrupted files, this is their answer in order to check if the card is damaged or not and includes several tips on using memory cards, it´s alittle bit long to read, but maybe it worths, so here it goes:
Some hints of using flash memory cards
1. Do NOT remove the memory card while it is operating, otherwise it may be
damaged.
2. Do NOT turn off the device, while the operation of writing /reading is
not completed.
3. When the battery power of system is low, do not write to the memory card to prevent loss of data.
4. Make sure the device (card reader/phone/camera/pda/camcorder) has finished reading/writing to the card before you take another shot/turn it off or the data will be corrupt/lost and the card will be damaged. You can tell by the device indicator light where it flashes when it is reading and writing to the card. Wait until the indicator light is off and stops flashing before you take another shot/turn the device off or remove the card/drive.
Before you continue, please make sure you have a reader that can read and write to 2GB card properly. DO NOT use in built-in reader on laptop and desktop, or old readers made 2 years or longer ago, because these readers can only use up to 1GB card. I recommend using it in external USB 2.0 reader that is made within 1 year ago.
If you do not have such reader, then connect the device (gps/camera/pda/camcorder) to the computer with USB cable and the card inserted and if works you should see new drive letters show up under My Computer.
Otherwise, if used in devices that do not support the 2GB card, the card will be damaged.
Please try the following troubleshooting guide first and see if it can solve the problem. Try one step at a time. If one works, then you can stop trying. You don't need to try all of them.
The following guide will erase all the data on the drive/card. So make sure you backup your data first before you try the steps below:
1. First, remove the card/drive from your computer.
Download the low level format tool below to your computer.
http://hddguru.com/download/software/HDDGURU-Low-Level-Format-Tool/LLFsetup.2.36.1181.exe
Install the program into your computer.
You should see a new icon called "Hard Disk Low Level Format Tool".
a. Insert the card/drive and run the program.
IMPORTANT!!! MAKE SURE YOU SELECT THE CORRECT DISK OR YOUR COMPUTER MAY NOT START LATER!!!
It should shows as BUS: USB. Select the BUS: USB. Also check the size and make sure.
If you don't see BUS: USB, that means the card is unreadable and need to be replaced. In this case, please STOP here and close the program and DO NOT continue below.
b. Then click Continue->Low Level Format->Format this Device.
c. Wait for a few minutes until it finish successfully with a message of asking you to partition and format it. (if you see formatting error, you can stop the formatting and the card needs to be replaced.)
d. Flash Card:
Put the card back to your device (camera/phone/pda/camcorder) and then use the format utility in the device to format the card.
Please let me know your test results. Thanks.
Reference: Program homepage
http://hddguru.com/content/en/software/2006.04.12-HDD-Low-Level-Format-Tool/
2. Please go to the site below:
http://www.sdcard.org/Downloads.aspx
Please try to download the software sdfv2000.exe (for windows only) and the manual for your reference.
Install the sdfv2000.exe in your computer, then insert the card into the card reader (if you do not have reader, you can try to connect your device to the computer with USB cable) and then run it:
a. Check the drive letter and also the size and make sure it is the correct card.
b. Click Option:
Format Type: Full Erase ON
Format Size Adjustment: ON
c. Click OK, then click Format. Wait until it finish.
d. You will be prompted to remove the card after it finish. Then go ahead and insert it in your (camera/pda/camcorder etc) and see.
16. T-mobile MDA (cannot format 2GB mini SD card)
Please install the software below to your phone (you can download the free trial):
http://www.pdatopsoft.com/PocketPC/StorageTools---Analyze,-Defragment,-Verify,-Repair-and-Format
Then use the Storage Tools software above to format the card and see.
does this method also apply on mini sd and mmc rs dv cards?????
Actually this was given for miniSD´s
Awais said:
does this method also apply on mini sd and mmc rs dv cards?????
Click to expand...
Click to collapse
I assume that this applies to all types of SD cards, I don´t know about the others.
Awais said:
that link is not working please post another link for that software
Click to expand...
Click to collapse
http://vaiosoft.com
goto recovery manager
Eelco
luiggi said:
I assume that this applies to all types of SD cards, I don´t know about the others.
Click to expand...
Click to collapse
is there any technical differnece between mmc and sd cards???/
cuz we can also use mmc or rs dv cards in htc devices but sd card is not useable for nokia and other mmc supported sets
Thanks for all of the input! I tried formating it with my camera with no success, then took the easy way out: I took it back where I bought it and got it replaced.
I'm filing this information away for next time, though! Thanks again.
Awais said:
is there any technical differnece between mmc and sd cards???/
cuz we can also use mmc or rs dv cards in htc devices but sd card is not useable for nokia and other mmc supported sets
Click to expand...
Click to collapse
SD cards where made to improve the lack of speed of MMC cards, also they include the writing protection/lock, it is the small switch you see in one side of the SD.
Also, SD cards are slightly different from MMCs phisically, SDs are thicker than MMCs (that's why you cannot put them in a Nokia phone), the electrical specs should by backwards compatible (aside from phisycal differences).
Recently some updatings/improvements have been done to MMC specs, they claim to be the fastest memory card technology available, there are MMC plus, etc.
I know all these things that I read recently (I just can't remember where).
hope this info can be used, and one last thing is that information on this subject can be found easily on the net, it's juest a matter of look for it, personally I like a lot an electronics web site: www.epanorama.net
thanks for the useful info and that link too
hmm today i got a miniSD topram, 2gb and it worked fine it was fat format i believe so i went to the winxp format utility and formated with fat32 16k everything seemed to work fine then i put it in the pda phone and nothing it did not see it, so then i put it back in the PC to format back to fat and nothing it does not see the card now at all
what happend i have been trying a million apps to some how force a format but none have worked, windows pretty much hangs while trying to read the card and at end says there is no media there, so do other apps
Low level format
losborn said:
I'm filing this information away for next time, though! Thanks again.
Click to expand...
Click to collapse
Low level format tool once done good job for me
http://www.killdisk.com/
I would proberbly say its fubarred, but you could try using software like SCAN DISK and carios other things.
Memory card fixes
Guys
We've seen this issue quite a bit lately.. Memory card simply locks up Windows when inserted.. It seems to be related to a flakey FAT table on the card. Formatting does nothing... Disk manager can't deal with it either..
The solution we found that worked was to use Paragon Partition Tools to remove the partition table on the card.. Recreate it.. then reformat..
Unless the card is physically cactus, it works every time..
Good luck!
Andy
www.pressdigital.com.au
Press Digital Support Team
???
any link for a free-ware partitioning tool !!!
wanna know more about erasing and recreating partition table on micro-sd cards
http://hddguru.com/download/software....2.36.1181.exe
Thank you, Luigi.
This work perfectly. My microSD 2GB was formated a 1GB and with this program now is all OK. I have microSD a 2GB again.
memory card recovery
This tool can help you to recover your files from damaged media.
www softorbits com/flash-drive-recovery
This device cannot be accessed because it is smaller than 65535 sectors.
:crying: It says "This device cannot be accessed because it is smaller than 65535 sectors" when I tried to low level format using LLFT.
---------- Post added at 07:31 PM ---------- Previous post was at 07:08 PM ----------
losborn said:
Thanks for all of the input! I tried formating it with my camera with no success, then took the easy way out: I took it back where I bought it and got it replaced.
I'm filing this information away for next time, though! Thanks again.
Click to expand...
Click to collapse
Good for you. But I'm still getting headache as I can't contact the manufacturer.
I had formatted the micro SD card in ext4 format for using with app2SD. I had it in 2 partitions.
And then after a while, the card stopped functioning (with so little and useless 30MB storage).
I had tried things like recovery, formatting, partition recovery.
Nothing can return it to original state. I just want it to be blank. It's ok I lost all the data.
Hi geeks
Problem when i try to take pictures.
Does anybody have a fix for that issue "unable to save file to sd card due to insufficient file permissions".
Formatting SD or rebooting doesn't seems to fix the problem indefinitely.
error message come back after a little while.
I don't want to hard reset unless it really fix the problem!
Is it a defective sd or a bug or else ?
Many thanks
froggiedroid
HaHa, I have the same problem with taking Pics on my Desire too, I get "unable to save file to sd card due to insufficient file permissions"
I defragged my SD Card yesterday using Windows 7 defrag tool but I doubt it's damaged it long term. If I figure out a fix i'll let you know...
FIXED!
- Press Menu/Settings
- SD & Phone Storage
- Unmount SD Card
Turn off your phone then take out the SD Card. Replace the SD Card & Battery then reboot your phone. With any luck it should be working again, did the trick for me
I tried that. It works for a day or two. And then again the same issue. Any long term solutions? I am planning to send a query to HTC support. Let me see what they say.
Same problem with Evo 4G
I have an Evo 4G (from GoogleIO) and have been having the same issue. A reboot fixes it temporarily but it comes back in a day or two. Hoping HTC gives you some ideas.
It has happened to me , remove Ebuddy or any msn messenger and probably you'll be fine.
I used to get this occasionally with the 4GB card that was included with my Desire. Once I bought a new MicroSD card it stopped happening.
Same problem with Eris. I unmounted, now just formatted and still cannot take a photo. Argh
HTC aria sd card insufficient file permissions
All I did to fix this issue was reformat the SD card. In windows, go to computer management, disk management, right click on the SD card, it might be labeled as F: or E: drive, click format. I formatted mines as FAT. All done, I was now able to save pictures, and videos to my phone's SD.
EAR
If you format the fat32 and you have ext3, and it keeps happening, you'll need to remove the ext3 partition, format in fat32 the whole card. This will solve your problem permanently
Hi, I have an HTC HD2 which I recently upgraded it rom ver. 1.66.415.9. I used spb backup to get my main memory files. Somehow, in a way, I was able to get all of my files anfd programs with windows settings and registry using ROM upgrade mode without changing the rom version back to the old one. But the then when I took pictures then tried to open them in albums, they weren't saved. A probition sign (circle-backslash "no" sign) showed up. I tried to open it but an error shows up saying "unable to open this type of jpg file" and then the sign diappears, as if the image wasn't saved. I even tried saving a note file. After saving, I opened it but instead of showing the notes I wrote, symbol characters showed up as if the file was encrypted. After rebooting my mobile, the note file wasn't there. I still have enough storage space to save more files and pictures. Did anybody face the same problem that I did? Please help me and thank you in advance.
freakzone said:
If you format the fat32 and you have ext3, and it keeps happening, you'll need to remove the ext3 partition, format in fat32 the whole card. This will solve your problem permanently
Click to expand...
Click to collapse
how do i know if the sd card has ext3 part or not and how do i format it? thanks
ivanakis said:
how do i know if the sd card has ext3 part or not and how do i format it? thanks
Click to expand...
Click to collapse
If you are on Windows machine, connect your HD2 via usb and mount your SD card. In Windows go to System Tools and Drive Manager. You should see your drive mounted as a removeable hard drive. It should be about the same size as your SD card- a 4GB card will show up as 3.7 gigs or so, a 16GB. as 15 gigs, etc.
Click on that drive and on the right side window it will tell you what kind of partition it is formatted with. You can also right-click on it to reformat it.
JUST MAKE SURE YOU ARE NOT ACCIDENTALLY FORMTTING AN EXTERNAL USB DRIVE OR HARD DRIVE
ivanakis said:
how do i know if the sd card has ext3 part or not and how do i format it? thanks
Click to expand...
Click to collapse
If you are on Windows machine, connect your HD2 via usb and mount your SD card. In Windows go to System Tools and Drive Manager. You should see your drive mounted as a removeable hard drive. It should be about the same size as your SD card- a 4GB card will show up as 3.7 gigs or so, a 16GB. as 15 gigs, etc.
Click on that drive and on the right side window it will tell you what kind of partition it is formatted with. You can also right-click on it to reformat it.
JUST MAKE SURE YOU ARE NOT ACCIDENTALLY FORMTTING AN EXTERNAL USB DRIVE OR HARD DRIVE
had the same problem and reboot fixed it. i thought you had to have the ext partition to do apps to sd on some of the roms. i use extended batteries and like my synister rom alot so i'd rather restart my phone occasionally to fix the issue. Usually i power down and pop in the fresh battery before heading out the door so it took a long time to notice the problem. Otherwise i'm too much of a noob to be much help but really is restarting your phone occasionally a huge deal.
Hi guys,
I have a 32g class 10 sd card I bought to use instead of my 16gb class 2 but I have been facing quite some issues in the last couple of weeks
I took the 32g, put it in my win7 PC, formatted it to FAT32, safely removed it and now the arc doesnt recognize it... I just wanted to format it via the settings-> storage -> erase card in order to make sure everything is all peaches and cream before loading 20+gig of music in it.
...
All I want to do is finally transfer all my music (24ish gig) to the new 32g , and back up all my apps and stuff via Titanium Back Up pro.
Simply said, I want to have my 16g card data in my 32g one , with all my beat
Please could someone share some tips or links, I'll do homeworks and have been, but I have been facing so many complications since the last few weeks
Thanks in advance
Does your phone recognize another card properly?
Did you apply a volume name when formatting the 32GB card?
Did you try the 32GB card in the phone before formatting it?
I've done pretty much the same as you with a 32GB card (Kingston Class 4) and had no problem.
Are you sure the 32GB card is good and not a counterfeit?
Try formatting it again to with FAT32, default parameters, short or no volume name. Try copying your files to the card on the PC to see if it actual works.
robsaw said:
Does your phone recognize another card properly?
Did you apply a volume name when formatting the 32GB card?
Did you try the 32GB card in the phone before formatting it?
I've done pretty much the same as you with a 32GB card (Kingston Class 4) and had no problem.
Are you sure the 32GB card is good and not a counterfeit?
Try formatting it again to with FAT32, default parameters, short or no volume name. Try copying your files to the card on the PC to see if it actual works.
Click to expand...
Click to collapse
Thanks I did put a volume name. That might explain it.
Yes the card already worked ( plenty of times ). I have been trying numerous time to transfert the music ( takes forever to transfer 20gig to an SD card , even class 10... ), and had mixed results that always ended up failing ( most of the times because of me... like forgeting to safely remove the sd card from my laptop made the card unrecognizable by the phone afterward...of course I just finished to tranfers the 20gig and was too happy to safely remove it... )
I will try that right now. thanks again
*EDIT*
Bah still same problem I must be doing stupid... SD card is not recognized by the phone. In the settings menu ( storage ) I cannot mount or unmount it and thus format it via the phone itself
That even after reformating it to default FAT32 partition with no volume name using MiniTool Partition Wizard Home
So number 1 priority is getting the SD card to be recognized again by the phone
**EDIT2**
When browsing the card with astro it says problem creating external cache , with root explorer it only says directory is empty. Still can't do anything in the settings menu
Obvious statement, but did you set it to primary?
sinkster©
What brand? I have a transcend card, and its not reconized by anything at all..
Sent from my GT-I9100 using xda premium
sinkster said:
Obvious statement, but did you set it to primary?
sinkster©
Click to expand...
Click to collapse
Hmm it is being formated by the default win7 tool at the moment non quick format tho so it takes some times and I can't look for sure.
bruflot said:
What brand? I have a transcend card, and its not reconized by anything at all..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
It's a memorette class 10 :S
Or format it wrong, Arc will say it's damaged and say that it has to format it to detect it.
Should fix it, too.
Sent from my iPad 2 using Tapatalk
Flo95 said:
Or format it wrong, Arc will say it's damaged and say that it has to format it to detect it.
Should fix it, too.
Sent from my iPad 2 using Tapatalk
Click to expand...
Click to collapse
Ya I'd love to get to this point ( which I got in the past hehe ) but at the moment it's still not even recognizing the sd card anymore
still formating btw....
How did you recover your issue?
I think I have a similar SD card problem. But, I encountered it after I did factory reset with SD card erase option selected. I didn't do anything after all. When I connect to PC, on the phone upper bar, there is no notification regarding USB. The middle button seems not working either.
Try formatting the card with this Panasonic SD/SDHC/SDXC Memory Card formatter.
That's strange why not just do a quick format in Win7 or WinXP, to FAT32? I use a 32GB as well and Arc has no issue with it. Coming from the 8GB, here's what I did.
1. Take off the 8GB from the Arc and placed in a USB reader.
2. Copy off all the files to your PC. I used WinRAR to accomplish this, just archive everything and STORE it (no need to compress so operation is faster). Or you can just use drag and drop plain copying its all the same.
3. Analyze the copied files and remove all unneeded bloats (ie. old movies u don't intend to watch anymore, clear out useless temp files, etc)
4. Copy back the files on your new FAT32 formatted card using the USB reader, then put in your Arc.
If you notice, the entire data migration is done via card reader/USB. Using the Arc as such will slowdown your progress and introduces unnecessary delays.
You can also use usb tool, it basicaly creates a back up image and can be restored to the new sd
Sent from my LT15i using Tapatalk
I picked up my phone looking to download a new ROM to it but then found that my ES File Explorer (given root permissions) was not able to view my external SD card via the mnt folder. At the same time, I was trying to back up my apps and such via Titanium Backup but it said that it couldn't backup anything because my card was full (it's default save location is my external card). It just said "Empty". I went to check my Settings to see if my card was somehow unmounted, but nope, it said it was still there. Even said that I had 11.27 GBs left out of 29 GB or whatever and gave me the usual options to Unmount and such. I pulled off my battery cover and the card was still there, so I assumed that the Android system might just need to sit for a while and cool off while off. Then I turned it back on to find that ES was still not able to view the contents of externalSDcard. So I went to my Root Browser and it too said that no files were there. I then went into my Settings and now it just says "Insert SD card".
I've had this happen before on other Android phones so I did what I normally do and hook it to my PC and reformat it. Windows found the device when I attached it via a SD card reader (the big fat kind like in your standard camera), it didn't want to format it. Windows brought up the prompt and said that it only could format 1GB so I knew Windows wouldn't be able to recognize it. I even tried formatting it via Command Prompt and typing "Format G:" and it too said there was only 1024MB to be formatted then went through trying to format and then said it failed.
I then tried pulling up Ubuntu's Disk Utility to format it. At first, Ubuntu wouldn't even correctly identify the device! Then I got the Disk Utility to recognize it and it couldn't even recognize how many GB/MB were originally on the card! Trying to format just brought up a message telling me that it couldn't do anything.
I had this happen a few times with my HTC Evo 4G OG but was able to format the card and put it back into my phone and have it work. Of course, the last time with my old 16GB card ended with it being destroyed much like this.
Please tell me that I can do something to fix this. Anything?!?!
This card is a 32GB Class 10 Patriot. This has happened before in my old HTC Evo 4G OG with a 16GB Class 4 SanDisk card. That card became unusable after a few times of this happening except I was able to fix it those times using the methods I tried above and allowing my phone to recognize the card again.
I apologize in advance if this has already been answered and I haven't found it in the forums yet (and the "search" function is temporarily unavailable). I'm crunched for time before I jump on a plane. I figured I'd ask while I continue to search the forums...
I have a Samsung Galaxy Note 2 (US - Sprint) and received a Kingston 64GB microSDXC class 10 card yesterday. I was previously using an old 8GB class 6 miscroSDHC card with no problems. I removed that card form the phone, inserted the new card and formatted it (exFAT). The phone had no trouble seeing 59ishGB of the new card.
I removed the new card from my phone and inserted it into my laptop. The phone had created a folder called "LOST.DIR" but other than that the card was empty. I created a folder called "Music" and proceeded to move just under 8GB of music folders/files to it overnight.
This morning I removed the card from my laptop and inserted it into my phone. I opened the "My Files" app and when I opened the "extSdCard" folder there was nothing there. I removed the card and reinserted it in my laptop and the "lost" and "music" files were both available. I removed the card once again and reinserted into my phone and after about 15 seconds or so the phone rebooted. Once the phone powered on it rebooted again. Once it powered on again it rebooted once more and this time it powered into safe mode. Once in safe mode, I checked for the card and low and behold I could see both folders and I was able to play mp3 files from the music folder.
The phone shows 51.06GB of 59.01GB free on the external card, whether in safe or regular mode. Every time I removed the card from the phone or laptop, I unmounted it first. Any thoughts as to what is going on? I've read that Android sometimes doesn't play well with Windows folders, but I've never had a trouble with this on any other Android handset.
Thanks in advance!
Try formatting it as FAT32(lba) and see how the card behaves. There are some clear disadvantages to doing this, but it will be an interesting test.
What OS is running on the Note? Is it rooted and/or running a custom rom?
I vaguely recall a post a while back specific to Samsung devices and Kingston cards...Ill look for it.
NoDataFound said:
Try formatting it as FAT32(lba) and see how the card behaves. There are some clear disadvantages to doing this, but it will be an interesting test.
What OS is running on the Note? Is it rooted and/or running a custom rom?
I vaguely recall a post a while back specific to Samsung devices and Kingston cards...Ill look for it.
Click to expand...
Click to collapse
Thanks for the reply! Right before you posted this I think I actually figured it out thanks to an old post from omar300. I tried their method and everything seems to be working now. And you guessed right...the card is now formatted FAT32.
I'm running stock 4.1.2. I'll be rooting it shortly so hopefully things don't break again!
omar300 said:
If you have been having issue with exfat card even after formatting it to fat32 this is probably the solution for you
The 64gb exfat card i have never worked on custom roms no matter what software i used to format it to fat32.
But finally it worked with this one software, Just make sure you follow the instruction correctly.
(external link blocked because I'm new)
First use easeus to delete the partion in 64 gb card.
then Click Start menu, select Run and enter diskmgmt.msc
You need to find the disk with unallocated space. Right click on it and select "New Partition" and follow these steps, clicking "Next"
Enter the maximum size for the Partition Size
Choose assign a drive letter. I used F:
Select "Do not Format this partition"
Click Finish
Now you have a drive letter, this is what we will pass to the formatter
(external link blocked because I'm new)
Now download a copy of fat32format. Extract the EXE file to C:\
Click Start->Run and enter cmd (as admin)
type this - C:\fat32format f:
enter y to continue
Now the sd card should work on phone.
Click to expand...
Click to collapse