I rooted my phone last night flashed the rom to SlideM. Added the apn settings for at&t..Everything else works fine, I just can't call out it starts calling and it just drops the call after a few seconds. I don't know what I did wrong.. :'[
Have u tried flashing a different rom or reflashing the one u have?
Sent from my MR1 V4 Remix 3G using XDA App
Not yet, But I'll try that. Thanks.
This might seem like a stupid question, but did you unlock the phone?
I haven't unlocked the mt3gs but I did unlock the G1,
and it didn't have anything to do with the rooting process.
I needed a hardware code. I was not able to just pop in an At&t sim.
infact I know APN settings don't have anything to do with calls.
APN settings are for data.
Ive Unlocked it.
Related
Hi, and firstly, thanks to any and all who offer their knowledge to assist my conundrum.
I recently purchased a Bell Canada version of the SG Note 2 (i317), I am on Telus so I attempted to Unlock the phone. I looked online and found people were having success unlocking these phones for free using the *#197327640# method, (whereby you go into the service mode, turn off the PERSHO_256 and then INITIALLIZ).
I tried this method and the phone then seemed to work with my telus sim, but only for voice, not data. When I put in a Bell SIM from a friend, both voice and data worked fine - which tells me its not a hardware (radio) issue. I also tried using another friends Telus SIM and had the same results as mine - which tells me it's not a SIM error. Also, all the settings in the mobile network area appeared to be correctly set up.
So, my next step was to try and reflash the phone to the stock Bell ROM and then just buy an Unlock code. I downloaded the stock ROM (2 different ones actually) and used Odin 3.07 to reload the ROM. I've tried it several times now, with both Bell ROMs and each time it says it's been successful, but the phone remains in the same, partially unlocked state.
It seems as though by using the PERSHO_256 method I have permanently, PARTIALLY unlocked the phone. I can't seem to re-lock it by installing the stock Bell ROM, and since it's unlocked, I can't get the foreign SIM error to come up to enable me to put in my purchased unlock code.
If anyone has any insights, it would be GREATLY appreciated. Thanks!
-Luke
did you check and/or setup the apn? it may be just the apn is not set correctly or you have to manually input hte apn
sounds like just APN needs setting...
APN?
How would I check/setup the APN? Is this to allow me to do a full reflash to a stock ROM or to access data with the phone in it's current state?
left ownsho
So I went into ACCES POINT NAMES and checked the sp.telus.net box, no change. Did a restart. No change Any ideas?
Wooooo Hooooo!!!
So, it's working now!!! I dug a little deeper and found the correct APN settings for TELUS. NOW IT F*@^&#*&@ING WORKS!
Thanks so much for pointing me in the right direction!!!
I'm trying to unlock my phone, I bought used on ebay, I found found a thread here that shows you how to unlock, but can't even do the first step. when I install a different sim card, I don't get the message Unlock, the phone reads the sim as a non support sim.
the sim I'm putting in the phone doesnt have service on it, Is this the reason the unlock message doesn't come up?
Please Help
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Not sure
cricketAC said:
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Click to expand...
Click to collapse
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
you can use free unlock from general http://forum.xda-developers.com/showthread.php?t=2024514
but of course you have to do it from uvkl1. but--you can do a nandroid, and after you unlock it, restore your backup! it will stay unlocked
juna1103 said:
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
Click to expand...
Click to collapse
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
New sim fixed
cr2069 said:
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
Click to expand...
Click to collapse
'' Thanks for the reply ''
The sim card I was putting in the phone was already register to a different phone.. I had to put a new sim, not active yet, then register the new sim to my imei and it worked fine.. I bought the phone used from ebay and it was already unlocked..
Hi guys , i have a little problem.. i did look in the forums but I prefer to have an opinion from the experts before I brick anything.
sm-g925t(tmo) put to metropcs clean imei.
I been using sicmade roms for a long time.. yet yesterday night the cell just stop working in the manner that every time i try to make a call it says "not register on network".
apn settings are alright. check... i went to a metro so they try one of their sim cards.. no network still.
click search on available networks: says "unable to select network . select automatically.
Thing I already did
reset phone
sim card out
mess with apn setting.
baseband oh6(check) imei still there(check)
had metro reset the signal.
flash the v6 backup I had.
baseband oh6(check) imei still there(check)
called company(metro) every things checks out.
any advice.. thank you
updated the phone? try in GSM only, I have the same problem, but at less in GSM the phone work
Check the imei looks like it got blacklisted
Sent from my SM-G925T using Tapatalk
Ok So I have a T-Mobile Samsung Galaxy s3 (SGH-T999L) (LTE Version). I previously rooted it and installed custom ROM using Cyanogenmod, then changed to TWRP later. Then, i wanted to revert to stock and unrooted my phone. I was told to install latest firmware and did so (Android 4.3 T999LUVUBOH1). Since then, i went from T-Mobile to MetroPCS. The phone is unlocked. When trying to use metropcs sim card on s3, it works for about 5 minutes (able to call & text), then all of a sudden i get NO SIGNAL and cannot do ANYTHING! I used my husband's metropcs sim card and same thing happened. Then, I tried my mom's AT&T sim card and it did seem to work fine for awhile. I tried accessing mobile networks to change APN while I had my mom's sim in there and was able to but when i insert my sim card it says: "Insert Sim to access network services" and there IS a sim in there. Our sims work fine on other phones. I don't understand what's going on. I've tried to flash a modem and even rooting it again, but Odin keeps failing or not responding. I cannot flash ANYTHING!!! Please help!
Flash back to a stock ROM and make sure everything works. Once this is done, call MetroPCS to see if they need to register the phone's imei on their system.
Thanks. It had official stock Rom already on it. I can try again if Odin decides to work for me. I have USB debugging on. I'll let you know what happens. I will also call Metro PCS. thanks again.
audit13 said:
Flash back to a stock ROM and make sure everything works. Once this is done, call MetroPCS to see if they need to register the phone's imei on their system.
Click to expand...
Click to collapse
Omgoodness!! Thank you SO much! Calling metro pcs worked. I'm in disbelief! So simple, I didn't even think of it. I really appreciate your help!
No problem. Glad it worked. We're all here to help and learn from each other.
Hey, I just need someone to point me to the right direction.
I bought my LG G2 off ebay last year, it came flashed to boost mobile. All I need to do is flash it back to sprint and unlock the GSM on the phone.
I just found this forum and don't know where to start in this process..
Im on 5.0.2
Software version LS980ZVI
Model # LS980
Thank you if you can help
this thread has everything you need
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
After you install TWRP successfully but before you unlock the sim card, You can install the latest version ZVI that is already rooted
http://forum.xda-developers.com/sprint-g2/development/rom-ls980-stock-5-0-2-zvi-flashable-t3303163
for unlocking the SIM card I would use this procedure instead
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
Thank you !!
Since you are on ZVI already, you could try the steps in this thread
http://forum.xda-developers.com/sprint-g2/general/how-to-root-zvi-install-twrp-t3410650
tekweezle said:
this thread has everything you need
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
After you install TWRP successfully but before you unlock the sim card, You can install the latest version ZVI that is already rooted
http://forum.xda-developers.com/sprint-g2/development/rom-ls980-stock-5-0-2-zvi-flashable-t3303163
for unlocking the SIM card I would use this procedure instead
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
Click to expand...
Click to collapse
Hey I did all the steps and got it unlocked but I cant to get my simple mobile sim card to work.
When I select the network mode global I have full bars, but when I try gsm/umts all my bars go away.
The phone is reading the sim card, but im not able to make calls/text. I Also get a authentication error when I try to update the prl/profile settings
did you do the twoclick procedure to unlock the sim card?
did you edit your apn? from the dialer, dial ##3282#
i am on freedompop so i changed my apn to freedompop.foggmobile.com. Simple mobile might require it to be mvno.att.net or something like that( i used that for airvoice).
tekweezle said:
did you do the twoclick procedure to unlock the sim card?
did you edit your apn? from the dialer, dial ##3282#
Yep I did the two click method but on both of my sims my phone refuses to connect/ find networks. I get emergency calls only.
I used a freedompop sim too and changed my apn to freedompop.foggmobile.com. but it still wont connect to the network. When I go into the freedompop messenger app it says. I dont have any data.
Click to expand...
Click to collapse
that;s strange. It worked for me as soon as I added my APN. Does your phone see the APN for three.co.uk and 3hotspot when you have the freedompop SIM in there?
I don;t even use the Freedompop Messenger app. i just use the sim for data. i can test the functionality of the sim slot because I have a freedompop CDMA/Sprint sim card along with a GSM one.
there are a couple of other ways to unlock the sim slot-they're all based on the same way so don;t know if anything will be different. there is a simfree.exe and there is a thread by someone named summercat for a 1 click procedure. try one of those
tekweezle said:
that;s strange. It worked for me as soon as I added my APN. Does your phone see the APN for three.co.uk and 3hotspot when you have the freedompop SIM in there?
I don;t even use the Freedompop Messenger app. i just use the sim for data. i can test the functionality of the sim slot because I have a freedompop CDMA/Sprint sim card along with a GSM one.
there are a couple of other ways to unlock the sim slot-they're all based on the same way so don;t know if anything will be different. there is a simfree.exe and there is a thread by someone named summercat for a 1 click procedure. try one of those
Click to expand...
Click to collapse
yep thats the first apn I see "three.co.uk"
im gonna tot back to zv8 and try this one more time or im just gonna go with ring plus or ting.
But thanks for all the help.
And you used ##3282# to add the new apn, correct?
I would go down to zve, then do the Ota update from sprint to zvg or zvh, then do the unlock and root and sim unlock. It's worked fine for me on zvh and zvi.
Sent from my LG-LS980 using Tapatalk
tekweezle said:
And you used ##3282# to add the new apn, correct?
I would go down to zve, then do the Ota update from sprint to zvg or zvh, then do the unlock and root and sim unlock. It's worked fine for me on zvh and zvi.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Yep, I enabled the lte/cdma, rebooted, then enabled gsm, rebooted and I got it to say freedompop on the lockscreen but after a couple of min. It went back to searching for networks.
im gonna try zve to zvg with the two click method
Good luck. The way you know it is supposed to be correctly installed is that your boot animation changes for the yellow sprint spark animation to some swirly wavy rainbow. The carrier image gets swapped to a gsm version.
Sent from my LG-LS980 using Tapatalk