[Q] tilt II - internet sharing error APN - Touch Pro2, Tilt 2 Windows Mobile General

Please i have been trying to do internet sharing..., but always i get the same message.Error APN..., someone who can help please!!!!! (step by step.....'cause I'm like the Flintstones with the phones!!!!!!!))

Try a different apn. Tombile has a few, don't know what your carrier is but if tmobile you can use wap.voicestream.com, internet2.voicestream.com, internet3.voicestream.com

master pda dude said:
The reason you are getting the error is because AT&T (I'm assuming you have AT&T because you said it's a Tilt 2) locks the Internet Sharing program to use a different network than what the phone itself uses. They do that to make you purchase a very expensive plan to use internet sharing with a computer or other device. To get around this you will need to install a registry editor, find the key HKEY_LOCAL_MACHINE\Comm\InternetSharing\Settings and delete the value "ForceCellConnection"
You should then be able to select a different network in the Internet Sharing program. Select MEdia Net (the network your phone uses). The other network is AT&T's ISP network which only works if you have the plan, which you won't need after this.
Or you can install the attached fix, which I'm not promising it will work because AT&T adds a strict installation security protocol.
Click to expand...
Click to collapse
How can I access the registry on the phone? Or, is it only on the computer? How can I get the phone to use a wifi? I'm trying to use in an area that wifi is only available on phones and not laptops. So, I'm trying to use my phone to connect to the internet with my laptop. But, I keep getting the same error "Error APN." Thanks.

tigerputer said:
How can I access the registry on the phone? Or, is it only on the computer? How can I get the phone to use a wifi? I'm trying to use in an area that wifi is only available on phones and not laptops. So, I'm trying to use my phone to connect to the internet with my laptop. But, I keep getting the same error "Error APN." Thanks.
Click to expand...
Click to collapse
It sounds like he's trying to connect to a mobile hotspot or something from his laptop.... wait.... no, maybe he's trying to connect through his laptop... hold on.... I give up, I have no idea what he's asking.

Thanks Master PDA Dude!
That *.cab did the trick. I had mod'ed my old ROM with the regedit, but the cab was even easier.

Related

Softbank: Access Internet *99# not working with WM6?

I am using a O2 Trion in Japan with a Softbank SIMCard. Just flashed a WM6 ROM and found that the Access Internet connection via *99# does not work anymore. Anybody has experienced this?
Thanx.
chainbolt said:
I am using a O2 Trion in Japan with a Softbank SIMCard. Just flashed a WM6 ROM and found that the Access Internet connection via *99# does not work anymore. Anybody has experienced this?
Thanx.
Click to expand...
Click to collapse
yeah, it's much better now; go to internet sharing and select USB then activate; it automatically connects, and what's more, your computer recognised the Hermes like it's a LAN card so you just go straight ahead and browse.
Olipro said:
yeah, it's much better now; go to internet sharing and select USB then activate; it automatically connects, and what's more, your computer recognised the Hermes like it's a LAN card so you just go straight ahead and browse.
Click to expand...
Click to collapse
Sorry, I think I was not clear enough with my problem. The GPRS connection does not work anymore. It does not connect, respectively the connection is terminated after a second with the message "the remote party has ended this connection". That never happened with WM5.
chainbolt said:
Sorry, I think I was not clear enough with my problem. The GPRS connection does not work anymore. It does not connect, respectively the connection is terminated after a second with the message "the remote party has ended this connection". That never happened with WM5.
Click to expand...
Click to collapse
do a soft reset, see if it comes back.
Olipro said:
do a soft reset, see if it comes back.
Click to expand...
Click to collapse
I am trying since half a day. Re-flashed twice. Even called Softbank. No way. It's strange: All other functions work like charm. I am using XDA Live v0.20
Could you please describe exactly how you are trying to access the internet. In WM6 yo do NOT use *99#. I am not sure, but from what you are saying I get the feeling that you are still uing this method.
chainbolt said:
I am trying since half a day. Re-flashed twice. Even called Softbank. No way. It's strange: All other functions work like charm. I am using XDA Live v0.20
Click to expand...
Click to collapse
nispen said:
Could you please describe exactly how you are trying to access the internet. In WM6 yo do NOT use *99#. I am not sure, but from what you are saying I get the feeling that you are still uing this method.
Click to expand...
Click to collapse
Yes, indeed, maybe this is my mistake. I have a Softbank simcard, but I am neither using their X0HT nor their Japanese ROM. Until now I used "Site Direct".
As this seems not availbale anymore from 1 April for non-Softbank ROM user, I thought I can use the "Access Internet" service via *99# instead. Is there any other way?
You dont need to dial up. You simply get the operators APN (access point) and any required username and password and create a new Cellular Line (GPRS, 3G) connection.
unwired4 said:
You dont need to dial up. You simply get the operators APN (access point) and any required username and password and create a new Cellular Line (GPRS, 3G) connection.
Click to expand...
Click to collapse
"*99#" is NOT the dial up service. It's the GPRS connection to access their "Access Internet" service:
Access point: *99#
Username: [email protected]
Password: softbank
That is the way I have been using WM5 since more than half a year. And this does not work with WM6. It works, but the connection is interrupted after a second.
They of course also offer a dial up service, but that's a different set up.
Aparently SOFTBANK are very choosy about their accesspoint. Their gateway checks the user agent. Do a search on here for softbank GPRS access.
unwired4 said:
Aparently SOFTBANK are very choosy about their accesspoint. Their gateway checks the user agent. Do a search on here for softbank GPRS access.
Click to expand...
Click to collapse
will do so at the double.
chainbolt said:
will do so at the double.
Click to expand...
Click to collapse
with a negative result.
Getting confused.
If you want to browse or send e-mail FROM the phone itself you do not need to enter *99# etc, only the APN address. You enter the *99# ON YOUR LAPTOP, if you are using the phone as a modem.
What exactly is the problem? Can you not browse the net on the phone itself (if you use PIE, can you surf the net)? Or can you not access the net from your laptop using the phone as a modem? I understood the latter to be the case.
If you CAN surf on the phone itself, but NOT on your latop using the phone as a modem, then the solution SHOULD be simple. In WM6 the function where the phone acts as a modem (DUN) no longer exists. So exit *99# crap. Forget it. If you try to use that, it wont work.
Instead, do the following. In programs, start INTERNET SHARING. Set the connection to USB. Then click connect. The phone should now connect to the internet. Next plug in your USB cable into the laptop. The laptop should now recognize a new network card (a Windows Mobile Internet Sharing Device) and use it to access the net. No more *99#.
It should work. I am posting this using my phone as a Windows Mobile Internet Sharing Device (yep) right now.
chainbolt said:
Yes, indeed, maybe this is my mistake. I have a Softbank simcard, but I am neither using their X0HT nor their Japanese ROM. Until now I used "Site Direct".
As this seems not availbale anymore from 1 April for non-Softbank ROM user, I thought I can use the "Access Internet" service via *99# instead. Is there any other way?
Click to expand...
Click to collapse
nispen said:
If you want to browse or send e-mail FROM the phone itself you do not need to enter *99# etc, only the APN address.
Click to expand...
Click to collapse
According to my carrier *99# is the APN, that's the problme I am trying to describe.
http://mb.softbank.jp/mb/en/service/data/communication/sb3g_v8/index.html
And it always worked this way with WM5.
Sorry man, can't help.
Weird APN name. Usually that *99# string (and all kinds of variants like *99*1#) is a "phone number" you enter when using the phone as a modem, not the name of an APN. Hence my confusion.
I did stumble across some threads on accessing Softbank --- one of them was called how to access SOftbank without cooking a ROM. Have you seen those?
Anyway, good luck.
chainbolt said:
According to my carrier *99# is the APN, that's the problme I am trying to describe.
http://mb.softbank.jp/mb/en/service/data/communication/sb3g_v8/index.html
And it always worked this way with WM5.
Click to expand...
Click to collapse
I'm having this same problem with my TomTom 910. It can't establish and internet connection, but can connect to my handset.
Are you on Softbank too?
Have you tried deleting all connection info, doing a soft reset, recreating your connection, doing a soft reset?
I remember that my phone refused to connect to the net once, and when I checked my connection settings (APN etc) all was OK. Yet it refused to connect, no mail, no browsing, nothing. Whenever the phone tried to go online I refused some kind of error message that the connection was closed or dropped or whatever. In the end, I just went in to Start - Settings - Connections, deleted the connection, did a soft reset and then recreated the connection. I entered the exact same APN as before but his time, mysteriously, the phone could establish connection again.
trapper said:
I'm having this same problem with my TomTom 910. It can't establish and internet connection, but can connect to my handset.
Click to expand...
Click to collapse
this worked for me on my treo 750v
Access point: softbank
Username: [email protected]
Password: softbank
i can surf the web via PIE, download emails via pocket outlook, sync avantgo content using these settings connecting to SB's GPRS APN.
What i have not figured out is how to send outgoing mails via pocket look using the above connection. I seem to get a returned mail all the time. Driving me nuts.
chainbolt said:
According to my carrier *99# is the APN, that's the problme I am trying to describe.
http://mb.softbank.jp/mb/en/service/data/communication/sb3g_v8/index.html
And it always worked this way with WM5.
Click to expand...
Click to collapse
The link above is for softbank mobile communications which is using your phone as a modem for a PC or other device. Not for browsing from the phone. There is a whole thread on this form for how to setup your device post 1 April when they changed the access point password.
chainbolt said:
Yes, indeed, maybe this is my mistake. I have a Softbank simcard, but I am neither using their X0HT nor their Japanese ROM. Until now I used "Site Direct".
As this seems not availbale anymore from 1 April for non-Softbank ROM user, I thought I can use the "Access Internet" service via *99# instead. Is there any other way?
Click to expand...
Click to collapse
This is a Hermes WM6 thread. Do you have a Hermes device? If so, there are CAB files you can use to automatically populate the Softbank APN information to your Hermes.

Tilt 2 ATT Wifi Cab, MediaMall Cab, and Opera Proxy

I'm having some problems getting the ATT Wifi and Media Mall cabs after flashing to the latest energy rom.
I think this might be solved if someone can post their stock opera:config settings for proxy. That way I could download the cabs from att through opera.
Any ideas?
[Proxy]
Use Proxy On Local Names Check=1
HTTP Server=wireless.cingular.com
HTTPS server=wireless.cingular.com
Use HTTP=1
Use HTTPS=1
Enable HTTP 1.1 for proxy=1
Added this to my proxy settings (Opera:config in address bar or \windows\opera\opera.ini)
Was able to go to device.home in my browser and navigate to the MediaMall site and then got the cab from there (search wi-fi).
I'm running the WWE ROM on a Tilt 2;
I was able to set the proxy, and browse the medianet page. I ended up going to the regular att website since searching the mobile medianet page didnt get me anything, and have it send me a sms for the wifi download. When I follow the link on the device, the medianet page complains that I do not have a supported device and won;t let me download it.
Is there some medianet component that has to be installed, or do I need to change opera's user agent string? Or is there another link to the wifi app?
Try navigating to http://device.home and if the mobile friendly medialnet site pops up your proxy settings are good. then find the mobile medianet site and search wifi.
sklinger said:
Try navigating to http://device.home and if the mobile friendly medialnet site pops up your proxy settings are good. then find the mobile medianet site and search wifi.
Click to expand...
Click to collapse
I am getting to the mobile medianet site, but searching either in the medianet search, or the mediamall search, i get "no results for your handset" (searching wifi wi-fi wi fi etc.) , similar to the "your device is not supported" message when I use the direct link to the install.
I'm still thinking i need to change my user agent string currently its this;
HTC_Touch_Pro2_T7373 Opera/9.50 (Windows NT 5.1; U; en)
anyone know what the stock tilt2 uses? I didn't think to check before i flashed.
It was the UA. Found the string on the ATT devcentral site;
seems huge, but when I changed the custom string in opera to this the download/mediamall access worked;
HTC-ST7377/1.14.502.12 (50433) Opera/9.50 (Windows NT 5.1; U; en) UP.Link/6.3.1.20.06.3.1.20.0
Attached the WiFi client cab. It added some pre-configured wireless networks in the wireless setup, not sure what else its doing for authentication.
ATT Wi-fi cab
I installed the ATT wi-fi cab on my Tilt 2 running the stock ROM, but when I try to run the program in doesn't open. The program shows up in the list of installed programs and in Program Files/Wi Fi Client. Tried a soft reset, but still not working. Any help is appreciated.
uh im a noob but what would be the benefits of using/having a opera proxy
and is the mediamall like a appstore from att?
and what does the att wifi cab do
kbm25 said:
I installed the ATT wi-fi cab on my Tilt 2 running the stock ROM, but when I try to run the program in doesn't open. The program shows up in the list of installed programs and in Program Files/Wi Fi Client. Tried a soft reset, but still not working. Any help is appreciated.
Click to expand...
Click to collapse
I haven't been able to get the wifi client working. It just instructs me to turn on my wifi in comm manager and gives me the opportunity to search for locations. Unfortunately, I still was hit by the starbucks wifi login page when I tried.
jopherr said:
uh im a noob but what would be the benefits of using/having a opera proxy
and is the mediamall like a appstore from att?
and what does the att wifi cab do
Click to expand...
Click to collapse
It seems the tilt 2 ships with 2 different proxy settings out of the box. 1 is a hidden proxy setting in the registry, the other is set in your opera settings. This basically instructs the device to view the internet via ATTs system (basic explanation). You need to do this to access Cellular Video/MediaNet, but otherwise it is usually better to circumvent the proxy.
Right, MediaMall is an ATT appstore filled with java based apps.
ATT Wifi cab supposedly lets you use WiFI for free wherever ATT Wifi is offered (Starbucks/McDonalds/airports).
ATT Wifi
I actually was able to use the ATT wifi at the local Starbucks today. I just turned on my wifi and it picked up the ATT network. I noticed that the ATT Wifi client had added some networks to the list, I guess that did the trick.
Does anyone have the att wifi .cab or know where it is located?
....attached to a post about 6 posts prior to yours..
http://forum.xda-developers.com/showpost.php?p=4748989&postcount=6
sklinger said:
IATT Wifi cab supposedly lets you use WiFI for free wherever ATT Wifi is offered (Starbucks/McDonalds/airports).
Click to expand...
Click to collapse
Only if you pay ATT for the wifi service. If you use the MediaNet $15/month package I dont think it will work. I think the Wifi and 3G package starts around $39.
wpbear said:
Only if you pay ATT for the wifi service. If you use the MediaNet $15/month package I dont think it will work. I think the Wifi and 3G package starts around $39.
Click to expand...
Click to collapse
I think the exact requirement is the 30 dollar a month data plan and a newer Windows Mobile device. Any Tilt 2 owner theoretically meets this due to the forced data plan requirement.
sklinger said:
I think the exact requirement is the 30 dollar a month data plan and a newer Windows Mobile device. Any Tilt 2 owner theoretically meets this due to the forced data plan requirement.
Click to expand...
Click to collapse
I pay $10 for family data unlimited which is usually called $15 for MediaNet unlimited but if you have txt plan it is only $10. This is the plans for non-smartphones on ATT.
I would rather save the monthly fee and not use crappy att wifi. This new att wifi is a way to try to lessen the load on 3G network since they suck. A little while ago the ATT wifi was $69 a month with 3G combo. They added the wifi to the standard package for smartphones in an attempt to get people to use the wifi when available but unless you need a lot of bandwidth (torrents) then the 3G should support the user needs without having us manually look and turn on wifi just to help them out.
MediaMall cab
sklinger said:
I'm having some problems getting the ATT Wifi and Media Mall cabs after flashing to the latest energy rom.
I think this might be solved if someone can post their stock opera:config settings for proxy. That way I could download the cabs from att through opera.
Any ideas?
Click to expand...
Click to collapse
I flashed the ENERGY ROM and now don't have MediaMall. Does anyone have a cab or thread to download? I'm also missing the BoardGames that came in the bloatware.
Thanks in case and in advance!
sklinger said:
It seems the tilt 2 ships with 2 different proxy settings out of the box. 1 is a hidden proxy setting in the registry, the other is set in your opera settings. This basically instructs the device to view the internet via ATTs system (basic explanation). You need to do this to access Cellular Video/MediaNet, but otherwise it is usually better to circumvent the proxy.
Right, MediaMall is an ATT appstore filled with java based apps.
ATT Wifi cab supposedly lets you use WiFI for free wherever ATT Wifi is offered (Starbucks/McDonalds/airports).
Click to expand...
Click to collapse
Do you have any clue what this hidden proxy in the registry is? How do I set it so I can use the media mall. I've set everything in Opera and can get to the media mall but all I get for anything is a message saying "no results for your handset." I went to the Media Mall on line (desktop) and found what I was looking for but when I tried the download via a text message they sent it tells me my device isn't supported
Anyone have a clue?
BluEyedTiger said:
Do you have any clue what this hidden proxy in the registry is? How do I set it so I can use the media mall. I've set everything in Opera and can get to the media mall but all I get for anything is a message saying "no results for your handset." I went to the Media Mall on line (desktop) and found what I was looking for but when I tried the download via a text message they sent it tells me my device isn't supported
Anyone have a clue?
Click to expand...
Click to collapse
Go to Start -> Tools -> Proxy Manager
There are cab files there to enable and disable the hidden proxy.
heres a cab for the proxy manager from the stock at&t - courtesy of at0mAng...
http://forum.xda-developers.com/showthread.php?t=542737&highlight=proxy+manager

Help

I got my at&t tilt unlocked and works well. But I cant get my data to work ie: internet ect. Any ideas? I'm using it on t-mobile.
Thanks for all your help
Jim
you need to set up the modem connection for att in the connections tab. I dont have them here but if you search around you will likely find them or call customer sevice and get the:
Access point name:
User Name:
Password:
Once you have entered those choose that connection that you just created to be the one you use to connect to the internet.
Did I miss a memo? He said he is on TMo, why use ATT settings?
To the op, try using my sig to obtain the T-Mobile settings and then set up the data connection. I bet if you searched for something like "T-Mobile data connection cab" you could even get it in a cab file so you wouldn't need to monkey with all the typing in of the info. Good luck. And please learn to search and read before posting.

Tilt2 outside USA, cannot tether or use IE or Opera!

Does anyone know how to get around the AT&T "blocks" so that I would be able to use the Tilt2 in another country? I am using a local SIM. Email on the device works fine with this but Opera or IE or tethering cannot connect.
I would really appreciate it if someone had some advice about this.
You have to program the data connection for your local sim card. You should ask the carrier for settings
yes, that is correct. But I think I did that properly because I am able to send/receive email.
I found a cab in a thread about tethering in this and it worked great. Now I can tether with the laptop.
However I can't load any page on either IE or Opera on the phone. So I am looking for some advice or registry edit that can solve this.
thanks.

Portable hotspot solution for simple mobile users with SGH-T989

As I could not find a thread about this specifically, I am posting this solution as it works for me.
On the Galaxy S2 SGH-T989 is where this pertains to though other users might encounter similar problem with other phones on simple mobile.
Stock 2.3.6 Rom
When you turn on the portable hotspot feature with this phone, what it does is disconnect your "Simple Mobile" APN and inserts and connects using a new APN called "Tethering". When you try connecting with your PC to your hotspot's ssid, it takes you to a web page on t-mobile.com informing you with an error 503 or some other error stating that its not available. I assume t-mobile is detecting that you are not their customer and blocks it.
it takes you here:
-------------------------------------------------------
http://androidapi.t-mobile.com/apppack/mvno.html
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
---------------------------------------------------------
The reason is because that APN tries to connect to "pcweb.tmobile.com". What you have to do is once you activate your hotspot, you have to edit the apn (while it is running) and change it from pcweb.tmobile.com to simple.
No other setting is needed. I am using "APN manager" which I paid for on the market and it is well worth it. I have used it for other purposes besides this and it allows you to edit the APN while it is live. Hope this helps other simple mobile users...
Also, you have to edit this "Tethering" APN every time you run the hotspot and delete the last one as it will just keep adding the new one with the t-mobile settings every time.
Anyone else out there with another solution please post it..
pcdocta said:
As I could not find a thread about this specifically, I am posting this solution as it works for me.
On the Galaxy S2 SGH-T989 is where this pertains to though other users might encounter similar problem with other phones on simple mobile.
Stock 2.3.6 Rom
When you turn on the portable hotspot feature with this phone, what it does is disconnect your "Simple Mobile" APN and inserts and connects using a new APN called "Tethering". When you try connecting with your PC to your hotspot's ssid, it takes you to a web page on t-mobile.com informing you with an error 503 or some other error stating that its not available. I assume t-mobile is detecting that you are not their customer and blocks it.
it takes you here:
-------------------------------------------------------
http://androidapi.t-mobile.com/apppack/mvno.html
Error 503--Service Unavailable
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.4 503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay may be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
---------------------------------------------------------
The reason is because that APN tries to connect to "pcweb.tmobile.com". What you have to do is once you activate your hotspot, you have to edit the apn (while it is running) and change it from pcweb.tmobile.com to simple.
No other setting is needed. I am using "APN manager" which I paid for on the market and it is well worth it. I have used it for other purposes besides this and it allows you to edit the APN while it is live. Hope this helps other simple mobile users...
Also, you have to edit this "Tethering" APN every time you run the hotspot and delete the last one as it will just keep adding the new one with the t-mobile settings every time.
Anyone else out there with another solution please post it..
Click to expand...
Click to collapse
Have you tried foxfi and wifi tether?
Looks like a good alternative. Thanks..
Sent from my SGH-T989 using XDA
Thanks!
This thread saved me! While I did not follow the instructions, it got me thinking to check the apn settings on my phone. As it turned out my apn was changed to a different apn when i turned on my hotspot and all I had to do was select my original apn again and tethering began to work! Awesome!
I'm using a freetel FTU152D (Samurai Kiwami) on Simple Mobile. It does change the APN every time I turn on the Hotspot, but fixing the APN settings doesn't seem to do anything; other devices connect to the wifi, but still can't see the internet. Meanwhile, I still have internet access on the FTU152D. Any ideas?
RichSPK said:
I'm using a freetel FTU152D (Samurai Kiwami) on Simple Mobile. It does change the APN every time I turn on the Hotspot, but fixing the APN settings doesn't seem to do anything; other devices connect to the wifi, but still can't see the internet. Meanwhile, I still have internet access on the FTU152D. Any ideas?
Click to expand...
Click to collapse
I've used my FTU152D as a Wi-Fi source using the dialog in settings and it works fine. Other devices can connect. My FTU152D is rooted with kingroot, however, would that make a difference?
nazcalito said:
I've used my FTU152D as a Wi-Fi source using the dialog in settings and it works fine. Other devices can connect. My FTU152D is rooted with kingroot, however, would that make a difference?
Click to expand...
Click to collapse
I rooted mine early on with kingroot, but unrooted it when I couldn't find any third party ROMs. I think I tried the Hotspot while it was rooted, but I don't remember for sure. I'll have to try it again.

Categories

Resources