Phone button on Rosie not working - EVO 4G Q&A, Help & Troubleshooting

Hi Guys,
My phone button on my Rosie stopped working (was working earlier). Not sure what I installed that caused the problem. I get a blank grey dialog box when I press it and I can't seem to fix it. Tried different themes with no success. Using Fresh's 3301 rom with Bigrushdog's Caulkin's Aloysius fix them, Caulk's 5mb and compress mms fix's and Net's OC kernal on an EVO 4g.

Related

[Q] Camera Broken Upon Update?

Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?
DanielWGK said:
Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?
Click to expand...
Click to collapse
Did you try a restart, I have heard of camera problems like this before (i think first FroYo update) and all it needed was a simple reboot.
Reboot didn't work. I reflashed the rom and BAM, it worked again. Crisis averted.
I have the same problem.
I'm running the following:
Azreal 3.0
circular battery widget update
removed HTC lock screen
superior battery charging kernel
wifi hotspot patch
I'm currently trying things to figure out what will fix it.
Here are the current things I have tried that did NOT fix the problem:
Reboot
Wipe cache/davlik cache
fix UID mismatches
I then reflashed azreal 3.0
At this point the camera worked again but everything was wiped. I then reapplied the following patches:
Circular battery
remove HTC lock screen
wifi/hotspot patch
after this everything continued to work
I then applied:
superior battery charging kernel and it broke again
I think the problem is the superior battery charging kernel
i am having the same problem and have not been successful yet fixing it. switched from cm7 back to stock to update my prl and tryed to use the camera while stock when the black blank screen happened. flashed to evdo(sense) and same result. flashed back to cm7 and the 1st time i opened camera it opened the ffc. when i tried to switch and everytime i have tried to open it since i get "camera error cannot connect to camera" help plz!
If you have HW 0004 phone or HW003 with the new camera, you have to make sure your rom has a kernel with the NEW drivers. The kernel in my signature has the new drivers for ASOP roms (like cm 7).
just flashed Savaged-Zen-V002-CFS-HAVS-SBC-WiMAX - GB.zip
with the same result running cm7. seems like ive tried 20 different things with no success. everything i have flashed has been off my sd meaning i have had all of it running before at one time or another with no problem. i really cant think of what ive done new to have caused this
Same here
Happened to me right after I flashed calkulins_format_all.zip and then the MikFroyo4.4.zip yesterday. I thought it was a problem with mikfroyo so I flashed Azraelz 3.1 and still the same issue (i was using azrael 3.0 with no prob prior to mikfroyo).
I'll post if I find anything that works, please also give any suggestions i'm willing to try anything b4 i take her to sprint.
I also flashed calkulins evio rom. When I flash back to stock it will start running again sometimes. Not even right away though. It will be black for a while then if I just let the phone sleep for a bit and come back to it bam. Camera again. For a little while. Then back to the same thing an hour later without doing anything! This is very frustrating! Someone plz help!
Sent from my PC36100 using XDA App
UPDATE
I turned my phone off and switched SD cards to one that has an old backup (3.29, kernel#11), when I booted into recovery, I could hear clicking noices coming from the lens, at a super fast rate (say 2-3 clicks a second).
Not wanting to do any more damage I turned off the phone.
I did just take my phone to sprint to fix my kick stand, maybe they did something to mess with me (thats just my paranoid side speaking)...
But what gives? What would make the camera shutter do that while im in recovery (btw using latest amon ra recovery)?

Browser Zoom/Reformat Not Working All of a Sudden

I had been running OMGB 6 for a few days perfectly when all of a sudden I had lost both gps and location services as well as experiencing some strange behavior in my browser. Some websites (most of which were mobile versions I believe) wouldn't allow zoom whatsoever (neither pinch nor doubletap), and the few that would wouldn't reformat the text to fit within the screen.
I reverted back to SkyRaider 3.5 (a 2.2 rom) and everything worked. I then decided to try the CM7 build (2.3) and I had the exact same issues. So it's not a problem with your rom (or kernel for that matter), rather it's with 2.3 roms in general for me.
Any ideas would be greatly appreciated. Thank you.
My specs:
Screen - ATMEL224_16ab (AMOLED)
HBOOT - .92
Radio - 11.19
CWM - 2.5.1.2 (I vaguely remember flashing this new version after installing OMGB 6, could this possibly be the issue?)
S-off - Yes
I haven't used OMGB but in most AOSP ROMs there is a setting to enable "Reflow after pinch in." Make sure that that is turned on. Maybe that's the issue? I'm not sure.
Edit: Updated op.

launcher pro settings not stick after ext4/cwm3 conversion

i was having problems with my comp recognizing my phone forever so i just got around to flashing cwm3 last night and flashing some ext4 roms. no problems or glitches other than launcher pro's settings not sticking after reboot. i installed bonsai's 2.0.1 and flashed the gingerbread theme, after rebooting all my widgets are gone and it doesnt save the launcher pro plus product code or any settings. i tried a few times wiping and trying different roms, but it keeps happening....... does anyone have any ideas?

CM7 causing many issues. How do I fix it?

I'm on CM 7.0.2 and using the Tiamat 3.3.5 (no SBC) kernel. No other special overclocking or undervolting rules set up.
Sometimes, things will just go awry since I've flashed CM7. It never occurred on Sense.
Things like:
Keyboard disappearing
SMS/MMS application force closing
Text messages refusing to send
Etc.
All requiring a reboot in order to get working again.
What might be the issue?
flash 7.0.2.1 over it first (wiping cache/dalvik), the 7.0.2 build was buggy and pulled hours after it released. If that doesn't work, try fixing permissions in ROM manager. If that doesn't work, a fresh install is always best. COMPLETELY wipe everything (use VR ultrawipe for ease) then start fresh. I did it recently with 7.0.2.1 and it's running flawlessly.

[Q] Issues with vijendrahs's [ROM/4.1.2] [Dec 19 2012] CM10 | Jelly Bean 4.1.2 - v3.0

Yes, I know this belongs in the thread for this ROM, but I'm still trying to hit 10 posts without spamming.
Three issues with v3.0 -
1. It wiped my APNs
2. I can enter new APN info but it does not save, even after I hit "Save," so I have no no phone, sms, or data
3. The Home button doesn't work
Any suggestions for fixes, particularly for the APN issue?! Rolling back to 2.7 for now.
Same to me,but only when try to flash a new RIL,otherwise apn is set right.
Flashing new RILS (various version ) got the signal lost,i don't know why.
Sent from my MP711I using xda app-developers app
Bizarrely enough, all problems resolved
Okay, so my APNs suddenly went away in 2.7, I couldn't get the phone to re-read them, and couldn't get it to accept new entries. I confirmed that the apns-conf.xml file was present and that it contained the correct info for my provider.
What the heck, I re-flashed 3.0. Still no APNs, still no home button. So I tried changing one setting after another trying to see if it would trigger a re-read of the APN file. Switching airplane mode on and off didn't do it, but whether by coincidence or not, after locking and then unlocking the phone, suddenly I had four bars AND the home key worked.
So, if you were holding off trying 3.0, give it a shot. VJ says "let it settle" after flashing -- I guess that what he means is it just takes a good long while for the system to get everything up and running.
I had issues with that ROM starting from version 2.7, and with the AOKP as well,
after some usage, the phone will freeze and restart, after that my home button will not work, all of the system configuration would wipe out, the Google play button in the drawer will vanish and so on.....
I think it is got to do with the a2sd script, I've tried using m2sd instead and the problem hasn't happened again...
so if you are experiencing the same problem try this....
Sorry but home button work on every rom wich i used. Issue of apn happen to me when try to flash another ril, i don't know a way to fix, but is a strange situation when flash a fresh rom. Have you performed a full wipe? Or better a full format except fat32?
Sent from my HTC Desire using xda app-developers app

Categories

Resources