Develop Bugs

how do you reinstall tilt software

ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync

Go to the bootloader - check the wiki for instructions. Connect your computer to the Tilt - you should see "USB" below the tri-color screen. Install the new ROM or radio. PM me if you have problems.
P.S. The answers to any problems you find are readily accessible in the Kaiser section.

shrshr429 said:
ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync
Click to expand...
Click to collapse
Check the wiki for sd flash. You kan rename the nbh file to KAISIMG.nbh and put it on a sd then goto bootloader and it asks you to install.

im sorry what's wiki and also I can't find software that will let me download the software without activesync does anyone have a link I can use

http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
You should be able to find everything you need here.

i tried everything there, theirs just one problem i cant find a rom that i can use without activesync does anyone have one

When you attach the cable and go to bootloader - does it say "USB" below the tri-color screen? If so, you have communication and can flash.
What do your three lines say at the top of the bootloader (red section)?

it does say usb my computer is reading the phone i just cant find a rom that doesnt use activesync, nothing with RUU_Sign.nbh, i did use hardspl the 3 lines say
KAIS1*0 MFG
SPL-1.0.01iPof
CPLD-8

i do have a microsd card i can try and upload it through their but there is stil the problem with no activesync

so can anyone help me here

ok, since i never really seen this question answered directly anywhere, you get this freebie
how to extract the RUU_Signed.nbh file
If its a cooked rom, the file you download will *usually* be a .rar file, extract the contents with winrar. depending on how the cook packaged it, it may not be named RUU_Signed.nbh, but it will still be a .nbh file
If its an original shipped rom, the file you download will be a .exe file, again, extract the contents with winrar. There will be a bunch of files and the RUU_Signed.nbh will be one of them.

if i downlaod the original rom it just opens up a program to install it how can i extract it without using the program to connect to my phone

omg!!!!!
1. install winrar
2. right click on the file you downloaded
3. choose "extract here"
then do the flashing using the microsd card

[Q] help please? :)

ok i s-off'ed my phone when it was first relesed, have just updted to the newest version 1.80 and i cant for the life of me figure out how to put the n1 table on my phone i tried "You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC." <<<that but it says cid incorrect reboot or similar any help is much appreciated
also sorry if this has been asked before but i could not find the threads

That's sounds like you need a goldcard but I haven't tried the PB99IMG way.
Have you tried flashing it through fastboot?
I think that's the more reliable way to do it.
Sent from my HTC Desire using Tapatalk

if im honest i cant get the sdk tools to fstboot flash it as it says i need java sdk when there already installed :S

Do you have a goldcard in your phone? If not, create one and try it again.
There's lots of posts about how to make a goldcard if you need them
Sent from my HTC Desire using Tapatalk

gold card didnt work

Billy. said:
if im honest i cant get the sdk tools to fstboot flash it as it says i need java sdk when there already installed :S
Click to expand...
Click to collapse
you dont need the java sdk you need the jdk
eitherway fastboot doesnt require java to flash as its an executable from path using cmd so im wondering what you are doing to use it
is it the installer itself that is giving you an error?
have to tried the s-off all in one flasher?
http://forum.xda-developers.com/showthread.php?t=794638

[Q] AlpharevX Doesnt detect my Wildfire :(

Ive tried to s-off my Wildfire like 3 times. The first one i failed cz i chose HBOOT 1.01.0001. The second one it was stucked on Acquiring Root <method 1> then i waited, then it said click anything to exit. after that my third times, it doesnt detect my handset.
Does it mean my WF already s-off or what?
Thanks a lot to who has answered my question

You can check the HBOOT version by pressing Vol - and power when turning it on.

i already know its 1.01.0002
But then when i tried to do it again, the alpharevx doesnt detect my phone. it only said : Android
Then it wanted i put the serial
nvm, it detects now. But it stucks when it says Thank you for participating

hye...
i am rlly new with this forum just rcently bcame a mmber... n of cz vry noob...
i hving this problem when i try to run the alpharev X it says waiting for device..
so?? what had i done wrong i already know that my HBOOT is 1.01.002..
btw sory my english..

Did you set your phone at USB-debug and charge only?

how to enable the USB debug?? i hve set myphone to chrge only still alpharex doesnt detect myphone..

USB debugging is under Settings->Applications->Development

does it take a long time for the alpharev X to dtect the phone cz i follow all ur instructions it still shows waiting for device..

ss_sk said:
does it take a long time for the alpharev X to dtect the phone cz i follow all ur instructions it still shows waiting for device..
Click to expand...
Click to collapse
No. It detects it almost immediately. Possible solutions:
- Make sure USB Debugging is On, as already said above
- Redownload the AlphaRev X Executable file
- Make sure Drivers are installed and working properly. There are 2 aspects to this:
1) Install HTC Sync, and, Uninstall it. The ADB Drivers will be installed
2) The HBoot Drivers are next. Guide to install that is here:
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install

i try to install the hboot driver .. i follow the steps but i get stuck cz i cannot find C:/android-sdk-windows/usb driver to install the diver...

ss_sk said:
i try to install the hboot driver .. i follow the steps but i get stuck cz i cannot find C:/android-sdk-windows/usb driver to install the diver...
Click to expand...
Click to collapse
Its an example. The actual file will be the one you downloaded. (Theres a link in the first line of that guide called Unrevoked Modified USB Driver)

thanks i just install the hboot driver.. install htc sync and uninstall htc sync.. so now i hope alpharev x can detect my phone... again thank u 4 the help..

now rise another problem.. alpharev x can detect myphone but when i enter the beta key base my serial no it says invalid beta key...
im pretty sure i enter the right serial key and the right beta key..

ss_sk said:
now rise another problem.. alpharev x can detect myphone but when i enter the beta key base my serial no it says invalid beta key...
im pretty sure i enter the right serial key and the right beta key..
Click to expand...
Click to collapse
Redownload the alpharev zip and run it, worked for me.
Hmmm which rom to test getting bored of cm7
Sent from my HTC Wildfire using XDA Premium App

There are two possible solutions there again. But, before that, make sure you have entered the right details (Right Serial Number (HT0....), Right HBoot Version, Right Device Model).
Once you are sure these are correct:
- Solution 1 - Copy the beta key in your clipboard from the website, then right click the title bar of the AlphaRevX Application, Click Properties, then check mark Quick Edit Mode. Then Right click anywhere inside the window, it will paste the key.
- Solution 2 - Redownload the AlphaRevX Application from the website and retry.
EDIT: Ninja'ed, Oh well.

lol sory mymistake... actually i really put the wrong beta key...
now that i hve S-OFF myphone what should i do now... sorry i really dont know anything..

Two ways again:
1) Follow this guide:
http://forum.xda-developers.com/showthread.php?t=1130044
2) Use Fastboot (Which I used)
- Download Android SDK - http://developer.android.com/sdk/index.html
- Download ClockworkMod Recovery - http://forum.xda-developers.com/show....php?t=1014498
- Extract the Recovery.img file from the 2nd link, and place it in your SDK Setup Path / Tools (eg: C:/android-sdk-windows/tools)
- Open a Command Window (cmd)
- Browse to the tools folder in this Command Window
- Type the command fastboot flash recovery recovery.img
- It will install ClockworkMod Recovery, you are done.
Then, simply follow Part 3 of this guide to install Custom ROMs and Stuff, irrespective of what you followed above.
http://forum.xda-developers.com/showthread.php?t=824396

i hve download the sdk there are 2 package android-sdk_r11-windows.zip and installer_r11-windows.exe..
so which one should i run??
i dont understand this part [- Extract the Recovery.img file from the 2nd link, and place it in your SDK Setup Path / Tools (eg: C:/android-sdk-windows/tools)]

ss_sk said:
i hve download the sdk there are 2 package android-sdk_r11-windows.zip and installer_r11-windows.exe..
so which one should i run??
i dont understand this part [- Extract the Recovery.img file from the 2nd link, and place it in your SDK Setup Path / Tools (eg: C:/android-sdk-windows/tools)]
Click to expand...
Click to collapse
EXE File.
That post simply means, that when you have completed installing your SDK, then, there will be a folder called "Tools" at your install location. Copy Paste the Recovery.img file to the Tools folder.

ok now i hve copy the recovery.img into tools
then open cmd right?? now what??

how to run RUU ROM.exe

Hey guys I downloaded this ROM RUU_Ace_Gingerbread_S_HTC_ARA_2.42.415.1_Radio_12.54.60.25_26.09.04.11_M2_release_193079_signed
When I try to run it to get the extracted ROM.zip. It gives me this error
An error (-5001 :0x80070002) has occured while running hte setup.
Please make sure you have finished any previous setup and closed other applications. if the error still occurs, please contact vendors.
Can any one help me

Have you installed HTC Sync?

andyharney said:
Have you installed HTC Sync?
Click to expand...
Click to collapse
yup I do have installed HTC sync. Indeed I ran another similar RUU.exe file n I got the Rom.zip. Some how the first RUU.exe is interfering the 2nd one. The system thinks I'm still running the 1st RUU.exe.
Please make sure you have finished any previous setup and closed other applications.
The error from first post...Doesn't it mean some file is being running how to kill that to let me run the 2nd RUU.exe

Probably a Windows restart is required if you installed some application that requires it but didn't ask for.
As another thing - isn't your phone branded? If it is, you might need to go the goldcard path.

[Q] Error [240] file open This is STUPID

I Read and Read and Read. The surprising part is that, what I need the most there is no video nor any instruction to fix the problem.
I'm trying to flash a ROM on my tilt 2 GSM phone.
I have already HSPL it,
I did task 29 using RhodiumWAdvancedRUU.zip because I couldn't get regular task 29 to work.
Now I get a white screen with HTC on it and it doesnt pass it. So I enter bootloader and make sure that at the bottom it shows USB. (yes I do see SPL-0.85. OliNex)
Now I try to install the ROM and here is where the problem starts.
My ROM:
I dled NRG MAXSENSE ROM which is Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
My Rhodium Update Utility (RUU) is
Rhodium_CustomRUU_v1.1.zip
I Open it and I see
CustomRUU.exe
Here is where I don't know what to do. Some instructions say that I need a .NBH file. Where do I get this file. They say it should be with my ROM.
All I get when I dl the ROM is
Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
Format 7z not .nbh
I get the Error [240] File Open when I run CustomRUU.exe. To fix it they say
"When this error message appears, check whether the downloaded image is placed in the DIRECTORY of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again."
What is the "DIRECTORY" of RUU"? Whats a directory? I never heard that term before.
Of which RUU? CustomRUU.exe?
Do I make a folder and put CustomRUU.exe in it with the Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z ?
Where is the .nbh file? Do I rename the ROM IMAGE to .nbh?
Please give me step by step. Ive read so much already and I dont know what to do anymore. Thank you for your help.

-___- I cannot believe I spent all this time for something so dumb. We should put this on the Help for NOOBS thread. The file " .7z " cannot be opened with Winzip. To open the file you have to use WINRAR. And from there we can see the Rhodium_SoftwareUpgrade.exe (RUU) and the RHODIMG.nbh files. And double clicking the Rhodium_SoftwareUpgrade.exe the software will start walking you through the process for flashing. I think it would be a good idea to add on the HOW TO FLASH A ROM that the 7z file requires WINRAR to be opened.
But thanks to the Lord I learned how to flash the Rom successfully.
--------------------
He who provides for this life but takes no care for eternity is wise for a moment but a fool forever.
-John Tillotson

Or use 7-zip!

-Jonny- said:
Or use 7-zip!
Click to expand...
Click to collapse
Too easy lol