Related
The system folder and config.gz from the T-Mobile UK G2 Touch.
-/system folder:
http://rapidshare.com/files/261342855/system_folder_from_T-Mobile_1.76.110.6.rar.html
MD5: BA140B0EF3F4B8068A72F7CB3BFDB1B5
-config.gz (as attachment)
Once again has a 10 download limit, would appreciate it if somebody could re-upload.
Cheers,
Phil
uploading it now
EDIT: all done
http://rapidshare.com/files/261350092/system_folder_from_T-Mobile_1.76.110.6.rar
Even a newer firmware? Nice! Checking the diffs now!
Edit: Just 6 Days newer.. SHouldn't be much changed..
To be fair it's probably just the addition of T-Mobile bookmarks, etc but I thought I'd put it up just in case there's a hidden gem.
Hello Sir,
I tried PM but for some reason I could not send it.
I have HTC Hero with dev watermarked software
HBOOT-1.75.2000
Radio 6.35.04.04
I downloaded T-mobile ROM you posted and I am wondering if I can just try to push the system folder to my device directly or there is something else I need to do as well ? Can I get step-by-step instructions please ?
Also if I put this release is there a chance that my device will get locked to T-Mobile network ?
Many thanx in advance
Hi there,
I'm afraid I don't know the answer to your questions. I followed instructions I was given to pull the system folders from the phones. What I posted wasn't actually a ROM that you can flash but rather a dump of the folder that contains the HTC applications, etc. This can then be used by ROM cooks to add the Sense UI to their custom ROMS.
I can't imagine that you'd be able to push the system folder across as the system folder is read-only on non-rooted devices. If you did somehow manage to push it across I doubt it would solve your problem but it also wouldn't lock your phone to T-Mobile, that goes much deeper than the system folder (please correct me if I'm wrong).
Cheers,
Phil
g2
sorry for maybe silly Q but i got tmobile G2 with 2.73 ROM but would like to downgrade it so can later install Modaco ROM and root it but can't do it with this updated ROM, as far as my research goes last few hours... now i got your files, could you tell me how i can downgrade it again to 1.76?
many thanks, michael
mishocub said:
sorry for maybe silly Q but i got tmobile G2 with 2.73 ROM but would like to downgrade it so can later install Modaco ROM and root it but can't do it with this updated ROM, as far as my research goes last few hours... now i got your files, could you tell me how i can downgrade it again to 1.76?
many thanks, michael
Click to expand...
Click to collapse
Checkout this:
http://forum.xda-developers.com/showthread.php?t=572683
thanks, guys, just removed my tmobile and will try now update it to modaco rom...
SuperJustKitchen v0.7 Released.
Go to my site: http://justkitchen.info to get the updates and the info. It takes to long to update every device's forum that is supported, and I plan to support all devices.
For more information on the kitchen, please read: http://forum.xda-developers.com/showthread.php?p=4288668
Word of warning:
None of the new EXT's have been tested and fixed for the Herald, Opal, Hermes AND Artemis. Please test test and test and then let me know which packages don't work and what YOU've done to fix them. (I don't have time to fix ALL of them by myself.)
(I'm no longer updating each thread separately for each device but just updating my site and posting the release info here.)
howdy,
i just gave it a shot, downloaded all files and wanted to look into it but it seems i have to look somewhat deeper to just set the kitchen up...it doesnt work following your walkthrough guide...
so for now the impression left behind is:
nice homepage
frustrating setup..for a time pressed person
greetz
Sorry, that's because the setup has changed a lot since I first started the kitchen for the Herald.
It's pretty simple.
Create a folder in your C drive and name it Kitchens.
Within that folder create a folder called SuperJustKitchen.
Dump the contents of the the main files into this.
Go into the Working_Directory and dump the contents of the other 7z files.
I'll probably be making an auto install pretty soon.
Please read this originall thread: http://forum.xda-developers.com/showthread.php?t=627997
This is not my work! I just change some files, to be able to run this Android on VGA devices. (I testet it just with RAPH100)
Screenshots:
Coming soon
Download:
Rapidshare
If you use HTC Fuze download FUZE Startup rename it to "startup" and copy it to andboot folder.
For Updating this Android u should use an application called MJGDroidUtil in ANDBOOT folder.
Click on/Open MJGDroidUtil -> Click Menu -> Update -> check the checkboxes -> click Update
Further Development Cancelled but update tool will be working
Wifi working? and HTC Sense not to big like one the Klinux build?
Yeah WiFi works for me, and the sense is usuable
I think this is Klinux, just bootscreen says it
Well if this is Klinux build it's working out of the box for me on VGA
And we already have a thread here for Klinux builds
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
macieh said:
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
Click to expand...
Click to collapse
how are you geting this to work on ur fuze? I downloaded the link and extracted, copyied everything in the andboot folder onto the root of my sd.
i started up haret and i keep getting loops and loops of the Klinux:hTc boot screen.
I go no where. I loops that screen again and again. I cant go pass that. What did you do different?
macieh said:
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
Click to expand...
Click to collapse
I have the same market place problem I have using a touch pro Raphael 100 .. no solutions for this ?
lemonspeakers said:
how are you geting this to work on ur fuze? I downloaded the link and extracted, copyied everything in the andboot folder onto the root of my sd.
i started up haret and i keep getting loops and loops of the Klinux:hTc boot screen.
I go no where. I loops that screen again and again. I cant go pass that. What did you do different?
Click to expand...
Click to collapse
I edited startup file to be able tu use this linux with fuze.
Enjoy it
FUZE Startup
Rename it to "startup" and copy it to andboot folder
// I will look at Marketplace
And what exactly is the difference with this :
http://forum.xda-developers.com/showthread.php?t=647779
and this:
http://forum.xda-developers.com/showthread.php?t=641021
I have had Android running on my raphael100 with perfect sense in vga for some time now.
Did you miss that or have you put in something extra?
I have checked. There is absolutely no difference..
Looks like someone wasn't really paying attention the last couple of weeks
The linked thread actually mentions a lot of things aren't working that are working on the other builds.
rajackar said:
And what exactly is the difference with this :
http://forum.xda-developers.com/showthread.php?t=647779
and this:
http://forum.xda-developers.com/showthread.php?t=641021
I have had Android running on my raphael100 with perfect sense in vga for some time now.
Did you miss that or have you put in something extra?
Click to expand...
Click to collapse
your vga fix, does that include the chopped off icons text as well?
AdamiX said:
I edited startup file to be able tu use this linux with fuze.
Enjoy it
FUZE Startup
Rename it to "startup" and copy it to andboot folder
Click to expand...
Click to collapse
thanks for your reply. but i still cant get this to work on my att fuze.
this is what im doing.
1) format card
2) extract downloaded file onto computer desktop
3) copy everything from the andboot file into root
4) replace the STARTUP.txt with ur startup_fuze from page1
5) put card into device
6) start up
I keep getting this loop at the boot screen of klinux:hTc
I can't go pass that!! ARGH!
The funny thing is that all these problems can be solved by reading to my thread and klinux's thread..
Indeed, I think it's better to just close this thread and not add to the confusion of the already growing number of android threads.
Ok guys
Sorry that i want to share something
Haha, good job, I am using Raphael 100 as well.
Please keep going
but my phone every time I wake it, the brightness always very low. Is there any solution? I already turn off the auto brightness.
AdamiX said:
Ok guys
Sorry that i want to share something
Click to expand...
Click to collapse
I'm not trying to bash you or anything and as always any work done to improve android on our devices is highly appreciated. Only thing going on here is that we can't really see the difference with the other packages.
Could you perhaps clarify that for us?
what is the probleme on this build
rajackar said:
I'm not trying to bash you or anything and as always any work done to improve android on our devices is highly appreciated. Only thing going on here is that we can't really see the difference with the other packages.
Could you perhaps clarify that for us?
Click to expand...
Click to collapse
Ok so use another build There is a lot of ported androids, like ROM. There is also a lot of ROMs so choose one and use it
@frank007hk brightness. I haven't got this problem. Just try to chane some settings. but if u turn off the auto brightness in WinMob, there will be something just in Android's settings
So Stop this thread. There is a lot of ports for android, u can try them
I need your help with creating a sqsh(or ext2) file with latest build of Froyo Android.
I tried to do it but as a result Vogue Linux(HaRET) can't mount it and also the job control is off(there is no way to turn it on without correct keymaping)...
Application that I used for making sqsh file is mksquashfs.exe .
I've already heard about a ext2 file format, that is better and faster...
I don't have any idea how to operate this files, etc., etc...
P.S. Sorry but I can't post links, you will must to search for it
mafiu95 said:
I need your help with creating a sqsh(or ext2) file with latest build of Froyo Android.
I tried to do it but as a result Vogue Linux(HaRET) can't mount it and also the job control is off(there is no way to turn it on without correct keymaping)...
Application that I used for making sqsh file is mksquashfs.exe .
I've already heard about a ext2 file format, that is better and faster...
I don't have any idea how to operate this files, etc., etc...
P.S. Sorry but I can't post links, you will must to search for it
Click to expand...
Click to collapse
There is already one made. Be patient, and I will post a build with it.
Really Thanks for this
P.S. The answer was "quite" fast
ETA of complete FroYo build for TP2?????????????
i should have never given my vogue away
fadimo305 said:
ETA of complete FroYo build for TP2?????????????
i should have never given my vogue away
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=627997
06/16/2011
The screenshots are not important. This is not a theme!
You can install a theme from here, for example if you like.
The theme it comes with is the:
Go Louncher Classical Theme (The new version of it)
The software installed is also not important, because you can remove it.
Google Market is installed, and you can install what ever you like, just like on your computer.
https://market.android.com
This is the actual Android Froyo operating system for the HTC Kaiser
So, stop asking me for screenshots and software installed, it's not relevant.
And the how to install guide is been posted here
Bug reports are welcome, other then that, I don't wont to hear from you.
Don't post a thank you either, there is a bottom for that, and you can also vote on the poll up there, but install and test it first!
Again Bug reports only, please!
I been working on this for 3 days straight, and figure I'll share what I got.
Everything seems to be working, except the camera is blurry, but that seams to be the norm.
Included is the rom, radio and kernel
ROM: 2.2.1
Kernel: 2.6.25
Radio: KAISER 1.70.19.09
Panel: 2
Key Map: US Normal
Resolution: 240x320
Storage: Nand & Nand
Most everything is installed in userspace and can be uninstalled or upgraded.
Oh got GO Launcher EX installed (Also in user space)
Credits:
I stole ideas from, and used following tools:
Makers of atools
Makers of NBH creator
HTC Flasher
kallt_kaffe
Krazy-Killa
dzo (dzo's posts wore a big help. just wish he would answer his own questions after he found the solution)
n2rjt
and many more.
@todo
Resize NAND partitions to the smaller system size
Original post and download Links are posted on my blog:
http://press.pzzazz.net
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
MaRekRM said:
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
Click to expand...
Click to collapse
Yeah witch apps are include. Some yours tweaks or etc... ???
MaRekRM said:
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
Click to expand...
Click to collapse
That sounds like a trick question.
Yes, at first I compiled everything my self but then to resolve bugs, I looked at other systems and basically stole stuff from them to fix my bugs. In other words, I can't take all the credit, it was a community effort.
Neo2SHYAlien said:
Yeah witch apps are include. Some yours tweaks or etc... ???
Click to expand...
Click to collapse
I removed most everything from the system and installed it in user space. So the system is very lean. You can uninstall what you don't like.
how is the rom？just waiting to see
gruessle ...!! thanks for your efforts in getting this done... I been looking from long time to install Android on my HTC TyTN II. However i was not able to get the proper build...
can you share the screenshots of the build which you provided as well some steps at high level on installing this..
Thanks in advance.
Please, I don't really understand how to go upgrade this. I find it hard to do. Is everything needed packaged in this download, or please can u list things needed to change to android. I'll appreciate your response.
tundelogic said:
Please, I don't really understand how to go upgrade this. I find it hard to do. Is everything needed packaged in this download, or please can u list things needed to change to android. I'll appreciate your response.
Click to expand...
Click to collapse
here is the howto
http://forum.xda-developers.com/showthread.php?t=680518
kkp said:
gruessle ...!! thanks for your efforts in getting this done... I been looking from long time to install Android on my HTC TyTN II. However i was not able to get the proper build...
can you share the screenshots of the build which you provided as well some steps at high level on installing this..
Thanks in advance.
Click to expand...
Click to collapse
The screenshots are not important.
This is not a theme.
You can install a theme from here, for example if you like:
http://golauncher.goforandroid.com/category/themes/
The theme it comes with is the:
Go Louncher Classical Theme (The new version of it)
The software installed is also not important, because you can remove it.
Google Market is installed, and you can install what ever you like, just like on your computer.
https://market.android.com/
This is the actual android froyo operating system.
Anyone else having trouble getting the kernel to install?
I get to 33% and the phone reboots...
Radio installed fine even though I was already using 1.70.19.09, just to be sure I installed everything in the package.
Installed HardSPL 3.34 and a WinMo 6.1 rom (custom) to see whats wrong. Installed L1q1d's kernel and goes right in like it should.
Checked .NBH with NBHCreator and only found 1 thing wrong: kernel set to Eclair instead of Froyo. Changed to Froyo and saved, attempted reflash and still won't go in...
;(Losted);
I also tried to install this kernel but I can't. Flashing in hardspl after few second give folowing error:
00018003
Os Fail
Update Terminate
UPDATE Fail.
Changing parameters in atools not helping. Every another kernel is flashing without problems so it's not phone fault
Gruessle, thanks for your efforts! I want to try your rom but being a noob waiting for more comprehensive list of known errors before flashing it to my kaiser.
Ok, quick "bug report":
After working with the kernel pack multiple times I have come to the conclusion that there might be a bug in the actual kernel file itself, throwing a code back to HardSPL and RUU (how I install).
I first noticed a problem in that the kernel was originally set up for a Polaris and had no resolution set. The size of the file should be unimportant as Scoot's newer kernel is in the order of 3.2-3.3MB in size (with the RIL patch installed it gets even larger), this one is 3,099KB, and l1q1d's is almost always 3,092KB.
The second issue I noticed is with the Froyo package itself... It's split up into many files (open the package in 7zip and you'll see what I mean). Normally, the packer has the files all listed inside the .tgz file, this one has the files inside many other files.
I have thus not installed the system on either phone because (correct me if I'm wrong), the kernel contains the basic directories for where everything is installed, and if I were to try and install this package on say, l1q1d's kernel, the phone would most likely crash because the files would not be found, including /system.
If ANYONE wants to dig deeper into this problem, feel free to message me. Personally, I think we've about finished getting all we can from the Kaiser, and much respect goes out to those who have done all the work in the past, but there's always that glimmer of hope that someone will find a way to pack this into a working rom installable through RUU or HardSPL.
I have one last thing to say:
Gruessle, please do your homework BEFORE posting things like this. There are people out there who still depend on this phone to operate as it is their only phone. I Personally cannot afford to go spend $100-200 on a replacement phone if this one goes down (thats why I have 2 of them). If you post something that does not work on the platform that you say it will, please correct it or move it to the proper forum.
BTW, I call shenannegans on one of the 5-star votes... just sayin'.
Your kernel have fake ;/ . rom works great ;D
sorry for bad english;p
PoXFreak said:
Ok, quick "bug report":
After working with the kernel pack multiple times I have come to the conclusion that there might be a bug in the actual kernel file itself, throwing a code back to HardSPL and RUU (how I install).
I first noticed a problem in that the kernel was originally set up for a Polaris and had no resolution set. The size of the file should be unimportant as Scoot's newer kernel is in the order of 3.2-3.3MB in size (with the RIL patch installed it gets even larger), this one is 3,099KB, and l1q1d's is almost always 3,092KB.
The second issue I noticed is with the Froyo package itself... It's split up into many files (open the package in 7zip and you'll see what I mean). Normally, the packer has the files all listed inside the .tgz file, this one has the files inside many other files.
I have thus not installed the system on either phone because (correct me if I'm wrong), the kernel contains the basic directories for where everything is installed, and if I were to try and install this package on say, l1q1d's kernel, the phone would most likely crash because the files would not be found, including /system.
If ANYONE wants to dig deeper into this problem, feel free to message me. Personally, I think we've about finished getting all we can from the Kaiser, and much respect goes out to those who have done all the work in the past, but there's always that glimmer of hope that someone will find a way to pack this into a working rom installable through RUU or HardSPL.
I have one last thing to say:
Gruessle, please do your homework BEFORE posting things like this. There are people out there who still depend on this phone to operate as it is their only phone. I Personally cannot afford to go spend $100-200 on a replacement phone if this one goes down (thats why I have 2 of them). If you post something that does not work on the platform that you say it will, please correct it or move it to the proper forum.
Click to expand...
Click to collapse
1) The kernel doesn't care where you place the files. Right now I use a debian system with Ferora and Gentoo in a chroot. Both work fine with the Debian kernel.
In other words, if you have a kernel that works for you then use that it should work with the rest of the installation.
2) I don't get what you mean with files are "split up into many files", I am just guessing but you must be extracting it wrong. Maybe it's a windows thing, I haven't used windows in 15 years so I wouldn't be able to help you with that.
3) I have included everything you need to duplicate what I got, which works for me, and it appears to work for others too. Now i don't use that phone much, and there might be bugs I am unaware of, but don't tell me it doesn't work at all, just because you can't get it to work.
barmalini said:
Gruessle, thanks for your efforts! I want to try your rom but being a noob waiting for more comprehensive list of known errors before flashing it to my kaiser.
Click to expand...
Click to collapse
barmalini, it appears that a few people have trouble installing the Kernel, but the ROM seams to work for everybody as far as I can tell.
According to my server records the files have been downloaded over 200 times and I have yet to hear a complain about the ROM.
So I would say try to install the Kernel, but if you can't still use the ROM with a Kernel that works for you.
If you have trouble installing from windows you can also try a live CD from debian or knoppix. I installed everything from a Debian system. (Knoppix is based on Debian)
If you don't know what a live CD is then go here for info:
http://wiki.debian.org/LiveCD
PoXFreak said:
Installed HardSPL 3.34 and a WinMo 6.1 rom (custom) to see whats wrong. Installed L1q1d's kernel and goes right in like it should.
Checked .NBH with NBHCreator and only found 1 thing wrong: kernel set to Eclair instead of Froyo. Changed to Froyo and saved, attempted reflash and still won't go in...
;(Losted);
Click to expand...
Click to collapse
PoXFreak,
you are not the only one having trouble, installing the ROM it appears.
I am wondering, are you also using Microsoft Windows to install the ROM?
If so can you try again with Linux, because it worked fine for me.
If you don't have Linux you can use a Live CD
Also if you can't get it to work, try the ROM with a Kernel that works for you.
Please report, I will check back.