Related
I am getting ready for people to flame me but i am going to ask this anyway, where has the site that hosted the black ROMS? i need the 3G dialer Jasjamming has released. Is it possible someone has it and could post a link up here.
There is something wrong with the shadow site
http://www.4winmobile.com/forums/portal.php
can someone please tell me what the problem is!! when i try to log in i get told i need to download and install a piece of software which i have done but i still cant get into the site, i cant even ask a moderator from that site to help coz i cant see the site!!!
Help & thanks in advance
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
mrvanx said:
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
Click to expand...
Click to collapse
thanks for the advice, can you tell me how i can get to the site mentioned on my previous post? i dnt know how im ment to configure that zend software (also i dont think i hav a webserver(?!?) and im guessing you will know what to do!!
thanks again
P.S. your guides have saved my skin so many times!! (Got my first TYTN recently, ur guide helped me get rid of WM5!!) good work
dude...dont worry about the zend thing....the forum is down and it is a message for the web administrator...the zend engine is part of php.
The site is back up now
Here's the dialer that JJ posted earlier...
"Black Shadow Video Dial CONFIGURATION
For those of you who want Video Dial Capabilities on your Black Shadows you need to install the following:
BACKUP FIRST!!!!!
1. Install Part1.CAB then Soft Reset
2. Install Part2.CAB DONT Soft Reset (press cancel after it is installed --> then go to the next step)
3. Install Part3.CAB then Soft Reset
YOU MUST FOLLOW THE ABOVE EXACTLY TO THE LETTER OTHERWISE IT WONT WORK.
> DOWNLOAD HERE <
Once the above procedure is completed, it takes around 2mb of storage space.
This video dialer is the one found on Black Dymond 3.5 and the benefit is that I have made it compatable with
zombie skins. You can customize your dialer skins by visiting: http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=513
(Note: uninstalling the zombie skins may cause your video button to dissapear therefore to change your zombie skin, just reinstall another)
Once you have successfuly installed the 3g Video DIaler, the "3G Video Dialer" functionality
in Pimp my Black v0.2 works, hence you can enable and disable the 3g Video Dialer (but the non-video dialer
is the basic WM6 one)
Apologies for taking long on this, I was actually trying to port a dialer that matches the current NON-VIDEO one in the Shadow.
This was unsuccessful due to complication with incompatable DLL's for video telephony etc.
NOTE: Once you have completed this procedure you will permanently lose (well until you HR) the DEFAULT SHADOW big-button dialer in your PPC.
Thanks and Best Regards
JJ"
http://www.megaupload.com/?d=P2EK9VR5
thanks guys, i thought there was something wrong with my comp, it did say on the link last night that new software was needed n i jus assumed is was needed by me. anyway it works now.
also to ronfin44 thanks for the links and install instructions, i didnt realize it got rid of the big button dialer, do you think there is any way to just add a another button to the dialer and shrink the font size of the number output?
thanks again
i wonder if someone could edit the retouched wizard dialer available on this site?
megaupload is not working here.. can you please upload at rapidshare?
Here ya go. Try this link. It's the origianl thread JJ posted for it at win4mobile.
http://www.4winmobile.com/forums/hermes-black-rom-support/9975-video-dialer-4-shadow.html
just realized this is one app i cant use. anybody knows how i would be able to uninstall this? will deleting the .cab files uninstall it?
thanks
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
agovinoveritas said:
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
Click to expand...
Click to collapse
i have successfully installed the 3g dialer. i did say i just realized i have no use for the app thats why i was asking how, if possible would i be able to uninstall it. no problem if i cant coz i know ill be HR anyways when i try out another rom. thanks for the reply.
Dear all,
I wonder if someone could help me out... (or maybe had the same problem): since the last update of google maps, the normally very useful option "Save as Contact" after running a search just won't work any more... nothing happens when I select it. Looked everywhere... can't find any hint or tips...
I'm on Dutty's 3.6 now, but I already had the same problem in stock Rom before I flashed.
If someone could help, I'd be very grateful...
Upgrade, as I can confirm that saving a contact in Google Maps works on Dutty 3.7
Ah... This is the only glitch I have on my Rom at the moment, so I guess I'll have to decide whether it's bad enough to call for a new flash and full re-install of everything. Wish there was a reg edit for that.... Anyway thanks for your reply.
so ive been researching and searching for a good week now on custom/cooked rom's and such. and ive finnaly decided to take the leap of trying them.
My phone is an AT&T HTC Tilt 2. And all i want to do is put Co0kie's Home Tab on it. Thats it.
So after hours of researching i finnaly discoverd how to flash my phone.
i used this method ( forum.xda-developers.com/showthread.php?t=550131 )
and now my phone is flashed (or whatever exactly thats suppost to do) and ive checked over this with the tri-color method.
and so i figured now i could just load CHT on my phone and istall it and ide be done, nope thats apparently not how it works.
apparently i need something called Manila Sence 2.5 . So ive searched and searched all over the internet and cant seem to find it, or if i did maby find it, it contains no reall directions on how to install it.
so im really hoping somebody could just show me in the rite direction. ide really appreciate it.
Please if possible provide links. ESPECIALLY to the sence 2.5 program.
ALSO, does anyone know if Sence 2.5 supports landscape? cus ive read a few things saying only 2.1 supports landscape? please if you know anything let me know because im always using my keyboard for texting and such.
THANK YOU VERY MUCH!
CheesyColt said:
so ive been researching and searching for a good week now on custom/cooked rom's and such. and ive finnaly decided to take the leap of trying them.
My phone is an AT&T HTC Tilt 2. And all i want to do is put Co0kie's Home Tab on it. Thats it.
So after hours of researching i finnaly discoverd how to flash my phone.
i used this method ( forum.xda-developers.com/showthread.php?t=550131 )
and now my phone is flashed (or whatever exactly thats suppost to do) and ive checked over this with the tri-color method.
and so i figured now i could just load CHT on my phone and istall it and ide be done, nope thats apparently not how it works.
apparently i need something called Manila Sence 2.5 . So ive searched and searched all over the internet and cant seem to find it, or if i did maby find it, it contains no reall directions on how to install it.
so im really hoping somebody could just show me in the rite direction. ide really appreciate it.
Please if possible provide links. ESPECIALLY to the sence 2.5 program.
ALSO, does anyone know if Sence 2.5 supports landscape? cus ive read a few things saying only 2.1 supports landscape? please if you know anything let me know because im always using my keyboard for texting and such.
THANK YOU VERY MUCH!
Click to expand...
Click to collapse
Sense 2.5 (aka Manila 2.5) is available in almost every ROM in the ROM Development section. It's basically like TouchFlo3D or Sense 2.1, but it has the quicklinks at the bottom of the Home Tab.
You must flash a ROM that contains Sense 2.5 (you can't just manually install it via cabs).
The recent builds of Sense 2.5 are landscape-supported, albeit not perfect. For example, the Documents Tab isn't perfectly aligned, but the essential Tabs (tabs that are in TF3D and Sense 2.1) are supported in landscape.
Is there a cab or anything that'll give me the Sense 2.5 email tab for my Sense 2.1 TP2. I only found one cab (kimi_sae_ireba) but it didnt work correctly. There's a lot of white and out graphics issues. I saw something in that post about editing the 220edf70_manila file for a WVGA device, but I wouldn't know how to do all that. Id love to have it tho, so any help would be appreciated.
Assuming you're still on a stock ROM as most people who use TF3D are, why not move up to a 2.5 ROM that has it? Development on 2.1 is all but ceased. There are very few chefs who still cook it in to their ROMs.
If you are stuck on having 2.1 over 2.5, try out Jackos Sense 2.1 ROM. It's very popular and stable.
Outside of these suggestions, maybe you could per$uade a chef or someone to mod the mode9 file you need to make it work. I wouldn't expect much, though.
My SmartMOVE ROM (Sense 2.1 + WM6.5) does have included the e-mail tab from Sense 2.5 mod by kimi_sae_ireba and it does work fine
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
jwatts03 said:
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
Click to expand...
Click to collapse
Why not just flash Jackos' ROM? It manages memory way better than the stock ROM. You'll have more RAM and a more stable experience overall in my opinion.
I did just look at that Rom, and I would kinda like to try it. I only have 2 problems. 1, I have lots of programs. And dont really wanna have to go through that whole process again. And 2, it has (SP1) (SP2) to download after the Rom, and Im not really sure what those are.
jwatts03 said:
I did just look at that Rom, and I would kinda like to try it. I only have 2 problems. 1, I have lots of programs. And dont really wanna have to go through that whole process again. And 2, it has (SP1) (SP2) to download after the Rom, and Im not really sure what those are.
Click to expand...
Click to collapse
What do you mean SP1 and SP2? Have you flashed a ROM before? If not, then you have a bit of reading to do before flashing all willy-nilly. Head over to the flashing for noobies thread to get a bit more info on the topic.
The proper order for flashing new ROMs is to unlock the SPL on the device, perform a task29, flash the stock ROM, task29 again, then flash the custom ROM. The first time is always a little scary.
Ive flashed before. I thought I found a good rom but this one looks like it might be even better. But look at this post I found http://forum.xda-developers.com/showthread.php?t=632617 After the rom download link it has 2 separate "SP" files to download too. But I dont know what those are.
Also it says it has Tom's autoinstall installed in the rom, will that install to the phone or the storage card? I dont want everything installed to the phone.
jwatts03 said:
Ive flashed before. I thought I found a good rom but this one looks like it might be even better. But look at this post I found http://forum.xda-developers.com/showthread.php?t=632617 After the rom download link it has 2 separate "SP" files to download too. But I dont know what those are.
Also it says it has Tom's autoinstall installed in the rom, will that install to the phone or the storage card? I dont want everything installed to the phone.
Click to expand...
Click to collapse
Next time, searching would likely answer your questions more quickly.
SP1 explanation
SP2 explanation
As far as Tom's autoinstall, yes it does install to the internal memory. There shouldn't be a need to reinstall everything to the SD. Some of them have settings that install to the internal memory or the registry, but the majority of them that you install to the SD stay there. For more questions about Jackos' ROMs, please ask on that thread. You'll get much better answers there. Jackos supports the ROMs very well. Just make sure you read and search properly before firing away with the questions, just like on any other thread.
jwatts03 said:
Do you know anything that could help me with that? I have the cab and everything. It just says I need to edit some files. Do you think you could extract any files from your rom to see if itd work for me? Thanks.
Heres the post I got everything from:
http://forum.xda-developers.com/showthread.php?t=605252
Click to expand...
Click to collapse
Just install this: Sense 2.1 Email Tab Add-on V3 ported from Sense 2.5*
And later that: WVGA fix.
Here is the post: http://forum.xda-developers.com/showpost.php?p=5202526&postcount=3 Just look in the tweaks/mods section.
PS You don't need to edit anything Just ensure that you're running a Sense 2.1 (not TF3D) ROM.
IGO PRIMO 1.2 - HD MINI FIRST STEPS ..
Having successfully installed vers. 1.1 - I'm working on the latest version 1.2 on HD MINI - already installed on HD2 and fully functional, the only problem I have is the resolution with less than perfect vision. It is still not at full screen. ll all but 'works fine (then maps gps etc ...) instead of still photos of the first steps of vers 1.2 that I have to say more' stable and fast. Graphically better than 1.2. WORK CONTINUES ....
p.s. (I posted a new thread 'cause the 1.2 is different from previous versions, one could take the items that were changed the SYS file, but I noticed that create problems. So I preferred to work with original files 1.2).
continue the good work, i m waiting to?
georgelaros said:
continue the good work, i m waiting to?
Click to expand...
Click to collapse
, i 'm waiting to ?...... waiting to receive advice and improvement in order to always better to improve the capabilities of this fantastic hidden terminal! it seemed obvious why. Right now for example I was able to enlarge the screen resolution from 480X234 to 480x272. I would obviously get to the final resolution of 480x320, it is understood that the thread has been opened in order to give and receive advice. the complete package here I do not think you can put ...
Primo 1.2 is already up and running!
Look here:
http://forum.xda-developers.com/showpost.php?p=12742927&postcount=14
mrmartischmi said:
Primo 1.2 is already up and running!
Look here:
http://forum.xda-developers.com/showpost.php?p=12742927&postcount=14
Click to expand...
Click to collapse
Is it running full screen HVGA resolution? If so then please post your config files !
mrmartischmi said:
Primo 1.2 is already up and running!
Look here:
http://forum.xda-developers.com/showpost.php?p=12742927&postcount=14
Click to expand...
Click to collapse
I apologize! I had not read that you had already posted ...... I did not understand what problem you sound? that (date) do you use? what the resolution? Thanks and sorry again.
p.s. and anyway I repeat .... I did not open this thread to let you know that 1.2 works, but only to be able to improve on (HD MINI) ... works even better if you already 'time, you can help with technical.
Oregon69 wach your inbox i have sent you a message please
sorry for offtopic
MobileMini said:
Is it running full screen HVGA resolution? If so then please post your config files !
Click to expand...
Click to collapse
See Post #4 ! Everything is on the mentioned Site.
What you need additionally is the TTS Voice Steffi (this is the only one functioning)
Marti
(Tried to attach the files, but didn't work...)
mrmartischmi said:
See Post #4 ! Everything is on the mentioned Site.
What you need additionally is the TTS Voice Steffi (this is the only one functioning)
Marti
(Tried to attach the files, but didn't work...)
Click to expand...
Click to collapse
TTS Voice Steffi (this is the only one Functioning) _ ....... sorry but I have to correct you. There are many voices in TTS do not know your language but I think they are standard. We add to this string then just sys.txt:
[sound]
csv_voice_enabled = 1
work and all entries of 1.1. I hope to be 's help. Hello.
invalid topic please fixed or corect !
nstratica said:
invalid topic please fixed or corect !
Click to expand...
Click to collapse
What is written is wrong? I can not understand?
ABOUT: to corect you mean: correct ?????? Just figure out just what you write. At least! But I do not want you to correct !!!!!!
primo 1.2
It would be nice if someone could upload data.zip branding.zip and sys.txt together with ANY valid skin to get this working on my HD mini. It drives me crazy now.
up
Hello, for 1.2-
I can attach the sys.txt and branding, working perfectly on hd mini.
for data.zip, use search: multiresolution, with inside also, 480x272.
are 48MB-....
thanks.....landscape only but works...
igo primo works only landascape mode! so far I managed only to run in portrait mode HTC HD2, but only with appropriate modifications.
Thank's very nice
resolution 480x320 primo 1.2 goo!
Hi,
stimulus-were you .....
I wanted to inform that I have applied in these two days, and I was able to start PRIMO 1.2, final resolution of 480x320. It is still in testing (I still have some errors) - incompatibility with the skins, but the road is good. Please, please do not ask even download via private post, I will not violate any laws, ownership licensing. And detract from this fantastic site XDA. And as already 'said the sole purpose of this thread.For me, each time discovering the potential of this fantastic smartphone.
with no download file, it's like having the cure for aids and keeping it to yourself .. it's great
Well I got it Working.
Just a few things
The GPS shows as working after I close the programm.
Seem to be blocking all of the interface buttons.
Need to close it from the Interface to be able to use the phone at all.
lamcho said:
Well I got it Working.
Just a few things
The GPS shows as working after I close the programm.
Seem to be blocking all of the interface buttons.
Need to close it from the Interface to be able to use the phone at all.
Click to expand...
Click to collapse
To receive calls from other stops on its own and continue the navigation, first download from the satellite positions.