Related
This is with the leaked official t-mobile wm6 rom. I can scroll through the messages just fine but clicking on one to view it just makes the screen blank, and replying to a message or compsing a new message just shows a blank screen as well (except the menu items seem to be there but not functioning).
Up until a few hours ago this was working perfectly, is this possibly a glitch with the program itself? Could someone upload the txtman.exe program so I could try and replace it?
Me too same problem.
Dont wanna to hard reset thinking there are someone could help to solve this.
I am searching if there are tmail.exe cab file for wm6.
Thanks in advance.
I recently tried the Palm SMS Threader CAB, and it works great on WM6. I'm using JJ's Black 1.2, and it runs flawlessly. If anyone wants thier text messages in thread form, then try it out.
I couldn't get the CAB to attach for some reason. It's under 5 megs. Here's a link for it.
http://www.megaupload.com/?d=WO8D3YG5
Note: For me all I had to do was drop the CAB to my phone and run it from there. It worked, and still works after soft resetting. However, there are actual steps to copy the files and over-write the Messaging ones in the ROM. The steps can be found in the Hacking and Developing forum if I remember correctly. If ya need help finding the steps I'll post a link from the treo forums. I'm using a Cingular 8525 on WM6, and it works great. -fin
Here are the install steps from another site. Like I said. I'm using an 8525 on JJ's Black 1.2 WM6, and all I needed to do was drag and drop the CAB into my phone. Open it and save it to the Storage Card, soft reset, and I'm all ready to thread!
Here's the install info.:
http://discussion.treocentral.com/showthread.php?t=139379
????? um...
Doesnt work well with soft keyboard
ronfin44 said:
I recently tried the Palm SMS Threader CAB, and it works great on WM6. I'm using JJ's Black 1.2, and it runs flawlessly. If anyone wants thier text messages in thread form, then try it out.
I couldn't get the CAB to attach for some reason. It's under 5 megs. Here's a link for it.
http://www.megaupload.com/?d=WO8D3YG5
Note: For me all I had to do was drop the CAB to my phone and run it from there. It worked, and still works after soft resetting. However, there are actual steps to copy the files and over-write the Messaging ones in the ROM. The steps can be found in the Hacking and Developing forum if I remember correctly. If ya need help finding the steps I'll post a link from the treo forums. I'm using a Cingular 8525 on WM6, and it works great. -fin
Click to expand...
Click to collapse
I have found a bug when i use it in that the soft keyboard covers part of the text space which is a little annoying. Otherwise, its great.
Hmm. I'm not having that problem. What kind of phone do you have? I just checked mine to see if that was also happening, but wasn't. That's weird, but yeah, I agree, this little app makes text messaging a whole lot better to track what you say to somneone and when.
Below are settings and setup that works for me. don't do much mms bit the sms works just fine.
1) run the .cab, Soft Reset.
2) edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset. Otherwise you still see MMS if you click your email hard button a second time.
3) Go into new SMS app, Menu, Options, Advanced:
Msg Center#: +13123149810
Email Center#: 121 <--this lets you send sms's to email addresses
MMS gateway address: wireless.cingular.com
MMS URL: http://mmsc.cingular.com
Network Profile: MEdia Net
4. Delete Start Menu/Programs/Inbox(1) folder.
I totally missed changing the settings. Thanks. I was using my old MMS to send them instead of the one in this app. It's originally setup for Sprint. Thanks again!
thanks for the new settings, helped a lot!
Scrog said:
Below are settings and setup that works for me. don't do much mms bit the sms works just fine.
1) run the .cab, Soft Reset.
2) edit the registry to rename HKLM/Software/MS/Inbox/SVC/MMS1 to MMS1OLD, Soft Reset. Otherwise you still see MMS if you click your email hard button a second time.
3) Go into new SMS app, Menu, Options, Advanced:
Msg Center#: +13123149810
Email Center#: 121 <--this lets you send sms's to email addresses
MMS gateway address: wireless.cingular.com
MMS URL: http://mmsc.cingular.com
Network Profile: MEdia Net
4. Delete Start Menu/Programs/Inbox(1) folder.
Click to expand...
Click to collapse
anyone knows the setting for T-mobile USA MMS?
let me answer my own question:
T MOBILE SETTINGS
Message center number +12063130004
Email center number is 500
MMS gateway address is 216.155.165.050:8080
MMS URL is http://216.155.174.84/servlets/mms
T-Mobile UK Palm settings
In case it helps anyone, here are the UK T-Mobile settings for this app to send/receive MMS:
Message centre number: +447958879879 (should pre-fill when you've got a signal)
Email centre number: blank
MMS gateway address: 149.254.201.135:8080
MMS URL: http://mmsc.t-mobile.co.uk:8002
Network profile: Default
Then don't forget to amend the MMS1 to MMS1old in the registry (see post above).
any one knows how to disable the biping sound?
driving my crzay!!!
erezj said:
any one knows how to disable the biping sound?
driving my crzay!!!
Click to expand...
Click to collapse
Do you mean the notification of when you get a msg? Start>Settings>Sounds and Notifications, drop down to recieve new SMS, and make sure no audio file is selected. Is that what you're lookin for?
I'm having a problem sending an MMS with this app. It keeps saying the same error. Like copuldn't send message due to ActiveSync, or a in coming call interupted it. If I use the old MMS app it works fine. ??
MMS doesn't work through this app from what I read on PPCGEEKS, so I changed a soft key to link it for faster navigation.
ronfin44 said:
I'm having a problem sending an MMS with this app. It keeps saying the same error. Like copuldn't send message due to ActiveSync, or a in coming call interupted it. If I use the old MMS app it works fine. ??
MMS doesn't work through this app from what I read on PPCGEEKS, so I changed a soft key to link it for faster navigation.
Click to expand...
Click to collapse
im not using the files you posted, but extracted the files for myself from the treo rom.. and MMS works just fine.
Anybody could make it work properly with Softbank?
Someone has tried to use this app in association to Jeyo outlook extender???
I've tried to install it and no sms are readed by outlook... some solution to this issue? I suppose that it use a personalized database...
shogunmark said:
im not using the files you posted, but extracted the files for myself from the treo rom.. and MMS works just fine.
Click to expand...
Click to collapse
Any way you could upload the extracted files so I could try your steps?
Am I the only one?
Hi, I've been lurking around since I got my 8525 in December. I've flashed just about every flavor on WM6 ROM that has come out. So far, I have not been able to get Palm Threaded SMS to work on the two versions I've tried it on. I've tried it on Black 2.5 and Custel 2.5.
I'm currently running Custel 2.5 and have errors that read "cprog is not a valid program file" and "tmail is not a valid program file". When I have the cprog failure the radio does not work and I have to hard reset to get it work. With the tmail error every thing works normally except the mail/sms functions. I use SPB Backup to save me the agony of the hard resets but really miss the Palm threaded application. I loved it in WM5 and have considered going back just to get it to work.
By the way, I have followed all of the instructions in the Treo Central post referenced above.
Thanks for any help.
Itchy Rash
storage card
is there a way to store sms from the Palm Threaded SMS to the storage card so that when i flash and change the setting back i can keep my texts?? PIMBackup backs up only the regular SMS not this one?? or at least does anyone know where the texts are stored so i can copy them before flashing and put them back?
thanks.
Sorry to ask such a stupid question guys, but how the hell does this work???
MMS doesn't seem to be in the front screen of messages anymore, but when I select new the option for MMS is there, it lets me create a new MMS but will not send? I have the settings in the 'Connections' part of settings and they are correct (used to work for Orange many years ago) but what I can't seem to find is the MMS Server settings as MMS is not listed in 'Tools/Options'
What the hell am I missing?
Thanks in advance guys
Arcsoft_MMS_4281
dirtjunke said:
Sorry to ask such a stupid question guys, but how the hell does this work???
MMS doesn't seem to be in the front screen of messages anymore, but when I select new the option for MMS is there, it lets me create a new MMS but will not send? I have the settings in the 'Connections' part of settings and they are correct (used to work for Orange many years ago) but what I can't seem to find is the MMS Server settings as MMS is not listed in 'Tools/Options'
What the hell am I missing?
Thanks in advance guys
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/attachment.php?attachmentid=80436&d=1207844422
By the way for anyone else who is still having issues with MMS all you have to do is install the cab and rerun the Connection setup on your pda that is localed in start/setting/connections and your all set
MMS on 6.1 not working, still.
MMS is still not functioning for me on my ATT 8525.
I am using FARIA.R-32 6.1 ROM (Dated 11/06/07), with Radio version 1.47.00.10 and Protocol: 32.80.7020.20H. I have repeatedly tried installing ArcSoft 4281 and 5.0.31.11. I have run through the connection settings, MMS settings and also even ran the Network Wizard.
Every time I try to receive msgs, I get a "Error Synchronizing" but they send no problem. I also called ATT earlier and had them ensure that the MMS was enabled for my phone. Any thoughts?
MMS works like a charm with CRC's Release 10 WM 6.1
auzroz said:
MMS is still not functioning for me on my ATT 8525.
I am using FARIA.R-32 6.1 ROM (Dated 11/06/07), with Radio version 1.47.00.10 and Protocol: 32.80.7020.20H. I have repeatedly tried installing ArcSoft 4281 and 5.0.31.11. I have run through the connection settings, MMS settings and also even ran the Network Wizard.
Every time I try to receive msgs, I get a "Error Synchronizing" but they send no problem. I also called ATT earlier and had them ensure that the MMS was enabled for my phone. Any thoughts?
Click to expand...
Click to collapse
What rom are you using, I think you should post this issue in that thread so you can get the proper help.
SPB may be harming your MMS state
Most likely you are using SPB's backup. That, when used will wipeout your MMS on a restore of your contacts. The best way around this is to hard reset your device, then reload your contacts using ActiveSync and Outlook. SPB can be used but not for your email, contacts, etc. unless you want to lose your MMS ability. A hard reset is done by the two - keys simultaneously and also holding in the power button from a powered off state.
Yes....probably.
Sure for me, with a restore with SPB restore...
But there is a way to set or restore the original registry value/settings?
auzroz said:
MMS is still not functioning for me on my ATT 8525.
I am using FARIA.R-32 6.1 ROM (Dated 11/06/07), with Radio version 1.47.00.10 and Protocol: 32.80.7020.20H. I have repeatedly tried installing ArcSoft 4281 and 5.0.31.11. I have run through the connection settings, MMS settings and also even ran the Network Wizard.
Every time I try to receive msgs, I get a "Error Synchronizing" but they send no problem. I also called ATT earlier and had them ensure that the MMS was enabled for my phone. Any thoughts?
Click to expand...
Click to collapse
Mine always does this IF I try to manually send/receive....MMS's should come to your phone automatically and u should not need to ever press that button.
thats been my experience anyway..
auzroz said:
MMS is still not functioning for me on my ATT 8525.
I am using FARIA.R-32 6.1 ROM (Dated 11/06/07), with Radio version 1.47.00.10 and Protocol: 32.80.7020.20H. I have repeatedly tried installing ArcSoft 4281 and 5.0.31.11. I have run through the connection settings, MMS settings and also even ran the Network Wizard.
Every time I try to receive msgs, I get a "Error Synchronizing" but they send no problem. I also called ATT earlier and had them ensure that the MMS was enabled for my phone. Any thoughts?
Click to expand...
Click to collapse
I think no one has managed to get MMS working successfuly on this rom can't recall it has been sooooooooooo loooooooooong
MrDSL said:
Mine always does this IF I try to manually send/receive....MMS's should come to your phone automatically and u should not need to ever press that button.
thats been my experience anyway..
Click to expand...
Click to collapse
The reason for your specific issue i think is poutlook.lnk is missing from startup file. Don't know much about mms, just trying to suggest somthing to be helpful
MMS send ok...! (new ArcSoft MMS composer & new gateway settings)
...but nothing about RECEIVE..The screen lights up...but nothing
I have more or less the same problem with my phone
I have a mobile phone with Windows 6.1 and no opccion to send or receive multimedia messages. did not have that opccion download from the internet an app from ArcSoft an now i have the oppcion but when i'm going to recive the message said the massage remain in the inbox there are get a message that was not possible to download the message
I am having a problem getting video to attach to the MMS while using Arcsoft MMS.
Here is want I am doing click new MMS then click the Insert picture/video. Then I click on the video camera icon. I take a clip, and click the "go back" arrow button, but the video is not attached.
I also tried it from clicking camera button, then taking mms video and pushing the email icon. It opens up the SMS/MMS (poutlook) for a second and then shuts down.
I am using Arcsoft 5.0.31.19. I also tried 5.0.31.7 and 5.0.31.16. same problems.
Thanks for any help.
Anyone else having this problem?
I just tried it on my phone and it worked. I am also running Arcsoft 5.0.31.19 and the same rom as you.
How did you attach an video to the MMS?
Because when I try to from the MMS setting of camera it just pops up and then goes away.
Packrat said:
How did you attach an video to the MMS?
Because when I try to from the MMS setting of camera it just pops up and then goes away.
Click to expand...
Click to collapse
I did just as you described. I chose to attach video, I captured some video, then hit the back arrow and it showed the video as attached in the message.
Can someone with a slide and handcent 3.0.4 test something for me?
Can you try and send yourself a MMS PICTURE and see if handcent will display it?
I'm currently having the follwing issue when the following happens
Send a MMS picture using handcent to another phone using handcent the MMS comes through blank with a <Subject:> only bubble.
HOWEVER if I open the thread in the default messaging the picture is there as a picture (not a slideshow).
If I send a MMS with the default app to another phone using handcent it displays fine. (viewing the same thread in default messaging shows the image as a "slideshow")
If I receive a MMS from a phone using handcent handcent displays it empty (but the default app shows the picture, again as a "image" not slideshow)
I tried this on two slides tonight with the same results. Mine and my sisters. My sisters' had NO other apps installed, just handcent.
I'd really like someone else with a slide to try to send yourself a MMS and post what happens here. (compose a new message, hit menu, hit attach, hit picture, add a picture, hit send)
And maybe try to send another handcent user a MMS the same way and another slide user if possible.
MMS works perfectly as long as its not from another handcent user
I'll check it out in the morning.
My mms won't even go thru on my phone with handcent
I don't do alot of MMS on my phone, but I just tried this for the first time today, and you're correct sir.
Messages just show up blank with the <Subject: no subject> line in there. I also can't seem to send MMS to other people (wife's g1) at all, they just don't make it to her.
Everything works correctly with the stock messaging app, but I really don't like the stock messaging app. Anyone think we could get the apk for the messaging app from a g1 or something?
handcent might need to update the app in order to send the mms properly
chrisinaz said:
I don't do alot of MMS on my phone, but I just tried this for the first time today, and you're correct sir.
Messages just show up blank with the <Subject: no subject> line in there. I also can't seem to send MMS to other people (wife's g1) at all, they just don't make it to her.
Everything works correctly with the stock messaging app, but I really don't like the stock messaging app. Anyone think we could get the apk for the messaging app from a g1 or something?
Click to expand...
Click to collapse
Thanks, I'm glad it's not my slides.
Also, can you try to attach from the camera and see if it sends out a pic?
(menu -> attach -> camera, take picture, click send)
It doesn't send anything for me, it just saves a picture on the card.
ratchetrizzo said:
Thanks, I'm glad it's not my slides.
Also, can you try to attach from the camera and see if it sends out a pic?
(menu -> attach -> camera, take picture, click send)
It doesn't send anything for me, it just saves a picture on the card.
Click to expand...
Click to collapse
Same thing. Saves the pic on the card but doesn't actually attach it.
http://bbs.handcent.com might be good to start a thread there, although I asked a question a while back and nobody ever got back to me on it.
yeah I have a long thread going there with a guy.
It's probaby something with the slide and/or sense
It came through 40 min later and was blank. couldn't view it in handcent. i'm gonna send them an email
Has anybody been getting app updates in the market with their MTS with T-Mobile?
B-Eazy said:
It came through 40 min later and was blank. couldn't view it in handcent. i'm gonna send them an email
Has anybody been getting app updates in the market with their MTS with T-Mobile?
Click to expand...
Click to collapse
Yes. A few days ago I couldn't see Handcent, now I can.
There is an article on phandroid about google fixing something with the market in the past few days.
Handcent is back up and running good