Related
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Bump.....ANYONE?!
So the following questions would need to be answered:
1) What version of stock were you running before you rooted? (i.e. 1.47, 1.32)
2) What root method did you use?
3) What recovery do you have?
4) If you have wireless tether working than you would need to have installed a custom kernel, which one did you install?
I'm sorry that no one else has tried to assist you in this, however, next time please post this in Q&A as this is for development purposes.
~Jasecloud4
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
my personal experience sometimes if your using the rom mangager to flash roms it doesnt always wipe it fully so i use amon recovery all the time now
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
nova0387 said:
Im honestly not sure which version i was running b4 I just my Evo about 4 days ago...I used the SimpleRoot 1.47 to root my phone...all went fine for rooting...I didnt install any custom kernal...I pretty new at this so bare with me a bit if you could
and thnx for your time for even replying man!
Click to expand...
Click to collapse
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
danon.brown said:
i honestly dont know anything about that simple root i have heard that it does work though i rooted in the beginning with toast's method. anyway what happens when you try and get to recovery mode IE powering the the phone off, then holding the volume down button while powering the phone on?
Click to expand...
Click to collapse
Well when i try to go into recover mode it first gives me a black screen that shows a cell phone and a triangle with a exclamation point then i hold the volume up keyand press power and it says "e can't open cache recovery command" n then takes me to a screen where it says
Android system recovery <2e>
use d-pad to highlight; center to select.
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
nova0387 said:
I did the root and I have the WiMAX setting and Wifi Tethering is working somewhat but I cant figure out how to flash my rom..I dl'd DamageControl 3.2 but i dont know what to really do now...When i try use ROM Manager I get the error..."an error occurred while attempting to run priviledge commands!" I'm just lost as to what i do now to start using a different rom
Click to expand...
Click to collapse
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
elitekernel said:
Okay during the process of rooting my device, ebo 4g, v1.3x
I ran into the same problem, you have to or I'm sure on this forum just do some research,.....
In RA, dalvik wipe, cache wipe and phone wipe. Then I flashed the rom via sd card, using clockwork custom recovery. If you used Simple root 3 click process you should have clock work.Via step 2.
Rename the Rom to update.zip and place in root sdcard.
Adb reboot recovery
Update.zip from SD card
Finnish do full system wipe and dalvik cache.
Make sure you are nand protected before flashing.
Via step 3
I don't know if this mighhelp just some recent stuff I ran into. Rooted my g1 a WHILE back. Hope these noobietips help lol
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
stewie-droid said:
Do this! It's the fastest and easiest way.
Once you get 1.47 and singed sigs then do DC ROM again.
http://forum.xda-developers.com/showthread.php?t=715915
Click to expand...
Click to collapse
I ttried that and it works fine until i get to the part about the su file...it doesnt let me go into recovery mode it shows me the black screen with a cell phone and a triangle with an exclamtion point
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
adb reboot recovery just reboots your phone into recovery mode. once your in that do all the wipes i think its 3 dlvk, data and something else. power off the phone once more then boot to recovery again. now one of the options is flash from zip go there and you should find whatever rom your trying to flash. also you should be putting your zipped rom files in the root directory of your sdcard. on a side not if your on a mac dont download them with safari use firefox or something else
nova0387 said:
Ok when i go to SimpleRoot and i click extras it says flash recovery...then i can select from Clockwork or RA...I've tried both and they just say flashed successful but nothing different happens...I'm not really sure what ADB reboot recovery is?
Click to expand...
Click to collapse
also clockwork and ra are 2 different types of recovery you wont notice anything until u actually reboot the phone into recovery mode
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
you forgot to wipe something common problem.. reboot to recovery again.. go to the wipes part and do all of them.. reboot one last time to recovery then flash DC it should work then
wipe the first 3 if your on RA 1.7.0.1 data/factory, cache, and dalvik.. then reboot into recovery again and flash
nova0387 said:
Ok i clicked flash rom on the simple root again and this time it brought up a black and green screen and more options...I selected apply zip from sd card and went down and selected the Damagecontrol zip...it said it installed successfully but now when i go to reboot my phone it keeps reloading the sprint 4g screen and wont boot all the way up!?
Click to expand...
Click to collapse
nova,
I had the same boot loop issue. My thread for it here:
http://forum.xda-developers.com/showthread.php?t=728955
The issue was that I wasn't totally 100% rooted. By carefully following these directions, I was able to resolve my issue:
http://forum.xda-developers.com/showthread.php?t=721055
I hope this helps also, I did it using the "PC" method. If you have questions regarding those instructions I'd be happy to share my personal experience.
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
nova0387 said:
Ok Ok Ok!!! I think I jsut got it my dood! How do i know tho? It booted up and everything just fine and i have wayy more apps including like Dconfig ad superuser permission...is that kinda how i kno?
Click to expand...
Click to collapse
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
aikeru said:
Errr... maybe? Superuser permission, etc. certainly doesn't come with stock. It depends on the ROM you installed. Here's one way to find out...
Go to Settings -> About Phone -> Software Information and check the "Build Number". AFAIK it's impossible to install DamageControl without full root (I tried to myself before fixing my root and going to Fresh 1.0.1) so if that's what you have I'd say you're good.
There may be a better way but that's all I know.
Click to expand...
Click to collapse
Yep my Build Number says DamageControl v3.2.3! Thnx again everyone who tried to help me and def a special thnx to Danon.Brown! Hollllllla
OK, so I'm a bit of a n00b here, and I need just a quick hand.
I'd flashed Myn's Warm TwoPointTwo a few days ago and was attempting to use metamorph to tweak the battery icon. Ran a Nand backup beforehand. Something went wrong with the metamorph and I was stuck in a bootloop afterwards.
So I hit power and held down on the volume rocker, hoping to get into my Nand.
Instead, it wouldn't let me select anything, went through its own update/recovery process, and now that it's done, I'm back to stock (complete with sprint bloatware) and totally unrooted. I DLed Rom Manager off the market and tried to get into Amon_Ra recovery, but it keeps telling me I don't have permission (thus I deduce I've lost root access.)
Is there anyway I can flash my Nand at this point, or do I need to go back through the rooting process?
Thanks for your help.
MadDogMaddux said:
OK, so I'm a bit of a n00b here, and I need just a quick hand.
I'd flashed Myn's Warm TwoPointTwo a few days ago and was attempting to use metamorph to tweak the battery icon. Ran a Nand backup beforehand. Something went wrong with the metamorph and I was stuck in a bootloop afterwards.
So I hit power and held down on the volume rocker, hoping to get into my Nand.
Instead, it wouldn't let me select anything, went through its own update/recovery process, and now that it's done, I'm back to stock (complete with sprint bloatware) and totally unrooted. I DLed Rom Manager off the market and tried to get into Amon_Ra recovery, but it keeps telling me I don't have permission (thus I deduce I've lost root access.)
Is there anyway I can flash my Nand at this point, or do I need to go back through the rooting process?
Thanks for your help.
Click to expand...
Click to collapse
To get a recovery on your phone, you need to have root.
To get root need superuser permissions and/or nand unlock
To get nand unlock and superuser permissions you need to go through the rooting process.
If you've used unrevoked 3.21 and have S-OFF. You can flash recoveries and superuser permissions without having to go through any rooting process.
So I guess then what I need to understand is how would I go about flashing the superuser?
edit: at this point I've already gone through the whole rooting process, including unrevokedforever.zip and the additional ENG bootloader. I get into ROM manager, and go to recovery, but the clockworkmod recovery doesn't see my most recent backup. Reflashing to RA recovery, it finds it, but tells me I have to run the recovery via ADB. ???
Pretty sure what happened is that you left a stock pc36img.zip on your sd card, leftover from your rooting process. When you booted into hboot, it loaded it automatically and you must have hit update. Not sure what caused your bootloop though.
Check your sd card, and if theres a pc36img.zip on it, delete it. Look for the superuser app in your app drawer, and also check your hboot to see if you're s-off. If you are in fact back to unrooted stock, you can always run unrevoked to quickly root and then you can restore your nandroid, just make sure you have the same recovery that you used to make the nandroid.
MadDogMaddux said:
So I guess then what I need to understand is how would I go about flashing the superuser?
Click to expand...
Click to collapse
When you go into the loader (Vol Down + Power) does it say S-Off in the first line?
If it does then you still have root and you can flash the custom recovery's .zip and you will be able to load back into recovery.
If you have S-Off read this: http://forum.xda-developers.com/showpost.php?p=8285266&postcount=1
Flashable SuperUser is located here: http://forum.xda-developers.com/showthread.php?t=682828
_MetalHead_ said:
Pretty sure what happened is that you left a stock pc36img.zip on your sd card, leftover from your rooting process.
Click to expand...
Click to collapse
Definitely. So now I need to get my microSD card reader and remove it. Can do.
Any idea why both Clockworkmod and Amon_RA are unable to load my backup? Versions for RA should be the same, and I think the same for Clockwork as well.
OK, I deleted PC36IMG.zip, now it just stays stuck in bootloader.
looks like I'm hosed, but here's what I'm learning on Freeza's thread, where I DLed the PC36IMG.zip in the first place:
freeza said:
UPDATE: It appears as though everyone is getting stuck in bootloader after this procedure. You can get out of this by reflashing your current ROM (without wiping) and/or restore a nandroid backup. Some have reported errors when trying to restore a nandroid backup. YMMV
Karadorde has put together a package that works. Read his instructions below:
First and foremost it seems that if you get stuck in the Bootloader (no matter what method you are using) then your Nandroid backups are broken. I don't know that anyone has been able to successfully restore from one of those yet.
The file in the OP allows you to apply just the engineering HBOOT.img (hboot_0.76.2000.img) This works flawlessly for some but not so well for others.
The file in Post 71 and Post 91 allows you to apply a full PC36IMG.zip that contains the engineering HBOOT.img (hboot_0.76.2000.img) This is a fix for some who have gotten stuck in the Bootloader after using the file from the OP. At the same time this has also caused the some of the same issues people were having with getting stuck in the Bootloader from the OP. This file will not downgrade any part of your phone, however, it will wipe the phone. Also it is reported that it broke root on one phone. I believe this only happened to one person, need confirmation on if it happened to multiple.
If you get stuck in the Bootloader you can re-flash your Kernel to fix the issue. Not sure if this works with the stock Kernel or if you have to have a custom Kernel. Looking for feedback on this.
If you get stuck in the Bootloader reflash your current rom. Need feedback on this as well.
Link to Karadorde's updated package: http://www.freeza-inc.com/PC36IMG.zip
Click to expand...
Click to collapse
With the text I've put in bold, looks like I'm hosed in that regard. So I'll just work on rebuilding it piecemeal.
Heh, first time I've tried to recover from a Nand, too. *sigh*
MadDogMaddux said:
looks like I'm hosed, but here's what I'm learning on Freeza's thread, where I DLed the PC36IMG.zip in the first place:
With the text I've put in bold, looks like I'm hosed in that regard. So I'll just work on rebuilding it piecemeal.
Heh, first time I've tried to recover from a Nand, too. *sigh*
Click to expand...
Click to collapse
If you reflash using the RUU from stock roms .com will that reset your hboot back to the non-dev hboot?
Sent from my Evo using XDA App.
xNotta said:
If you reflash using the RUU from stock roms .com will that reset your hboot back to the non-dev hboot?
Sent from my Evo using XDA App.
Click to expand...
Click to collapse
i do believe so, but someone correct me if im wrong, i do know when i unrooted a few weeks ago with the RUU i went to the newest hboot, but now that i'm rooted again im back to the ENG .76 version.
Running a RUU will put you at full stock, including radios and hboot.
If you are still stuck, try running the most current RUU and then rerooting.
http://forum.xda-developers.com/showthread.php?t=800582
_MetalHead_ said:
Running a RUU will put you at full stock, including radios and hboot.
If you are still stuck, try running the most current RUU and then rerooting.
http://forum.xda-developers.com/showthread.php?t=800582
Click to expand...
Click to collapse
RUU's solve everything. No? haha
Igotsanevo4g said:
RUU's solve everything. No? haha
Click to expand...
Click to collapse
They've sure helped me out of more than a couple binds
got my evo about a month ago. rooted lastnight since unrevoked finally pushed out their 3.3 version which is updated for my version of hboot (2.02). the root went very smoothly. i installed the latest cyanogenmod rom, only to discover there was no market or gmail app with the rom! wish i had known that before. after doing some research online, i found out i needed to flash or install a "gapps" apk. so, looked around for that for a couple hours and couldn't find it. i downloaded what i thought would be the right .zip file to get the market on my phone (a vending.apk that was listed in another thread having to do with this same issue). so anyway... downloaded that, moved it to the root of my sd card, flashed it through clockworkmod recovery (by the way, everything up until this point was perfect) and finally rebooted my phone... only it never rebooted. the white htc EVO 4G screen was there. then, black screen, as if it was about to begin the cyanogenmod boot screen and fully boot. but, no. it went from white evo screen to black screen... to OFF. after this, i couldn't even turn it on to get it into hboot or access recovery. tried to do that for two hours. and finally i was able to get in... so i tried doing a factory/data reset through recovery, then a cache clear, then reboot. nothing. same thing. went back into recovery, tried reflashing cyanogenmod rom again. nothing. tried flashing myn's rom. nothing. all i get is installation aborted.
i am pretty sure that this is not a complete brick since i am now able to access hboot and recovery. but if i can't flash anything... and i'm stuck in hboot and recovery and cant boot my phone... what the hell do i do now? please help me figure this out!! anybody have any good advice or a known fix...??
Boot into recovery. Do a factory reset. then wipe cache and dalvik catch. Re flash cynagon and let it boot. You then need to find gapps.zip. Boot into recovery flashing gapps.zip.
i did all that. step by step. and when i reflashed the rom, that is when it wouldn't install, saying installation aborted. but, i'm gonna do it again. let's see if my phone wants to play nice now...
brtnygrey said:
i did all that. step by step. and when i reflashed the rom, that is when it wouldn't install, saying installation aborted. but, i'm gonna do it again. let's see if my phone wants to play nice now...
Click to expand...
Click to collapse
If that does not work! you are going to have to update with sprint lovers rom, that is in a PCM36IMG.ZIP. Install it by holding the _vol and th power button, boot into boot loader, than it will search for the zip file and ask you if you want to update, say yes ans just weigh for it to be done. Its going to take few minutes first boot! just hold on. I hope this helps in anyway.
evolishesh said:
If that does not work! you are going to have to update with sprint lovers rom, that is in a PCM36IMG.ZIP. Install it by holding the _vol and th power button, boot into boot loader, than it will search for the zip file and ask you if you want to update, say yes ans just weigh for it to be done. Its going to take few minutes first boot! just hold on. I hope this helps in anyway.
Click to expand...
Click to collapse
do you think that sprintlovers rom will install even if no other rom will install? because... i was able to install Gapps.zip file just fine. but every rom i install is unsuccessful.
brtnygrey said:
do you think that sprintlovers rom will install even if no other rom will install? because... i was able to install Gapps.zip file just fine. but every rom i install is unsuccessful.
Click to expand...
Click to collapse
The springlovers rom gets flashed the same way sprint flashes there upgrades so it should
Sent from my SPH-D700 using Tapatalk
mysteryemotionz said:
The springlovers rom gets flashed the same way sprint flashes there upgrades so it should
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
ok is the install through recovery supposed to be almost instantaneous? it didn't take a minute like every other rom. and after reboot (10 minutes ago) i'm still sitting on the white htc EVO 4G screen. i don't think this is working either. but i really do appreciate your help. any other suggestions? is there anything else through recovery that I can do (since i cant make it past that) that might fix my system? anything in partition? i'm so stuck!
mysteryemotionz said:
The springlovers rom gets flashed the same way sprint flashes there upgrades so it should
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
and also... when i go into hboot, and it runs through the "checking sd" thing before i can select options... it says "no image or wrong image". what?
Nothing is working!!
Did you try a rooted RUU yet?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/ROMs
Wipe everything twice first (just to be safe). Are you using Amon RA or Clockwork, by the way? The only other thing I can think of would be that your SD card isn't formatted properly, but that would have to mean you intentionally formatted it or put in a new one that didn't have the right files on it.
SilverZero said:
Did you try a rooted RUU yet?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/ROMs
Wipe everything twice first (just to be safe). Are you using Amon RA or Clockwork, by the way? The only other thing I can think of would be that your SD card isn't formatted properly, but that would have to mean you intentionally formatted it or put in a new one that didn't have the right files on it.
Click to expand...
Click to collapse
i am using clockwork. i've wiped so many times... but i can't make anything happen. and, i did format the sd card eventually, but not until a couple of hours ago... and only as a last resort because nothing else worked and i've been trying to fix this since last night, so i figured it couldn't hurt. but if that is part of the problem... how can i fix it? thanks for your response. i don't know what else to do other than take it in for a switch.l but if i can get into hboot... then sprint can too... and they will see that i'm rooted and void warranty. so am i completely screwed?
I had same issue.
I just reflashed the sprintlover rom (PC36IMG.ZIP) which came with Amon_RA recovery.
Then i installed the CM6 with Amon_RA recovery and everything works fine now.
Good that i did Titanium backup few days before
This is happening to me too. Almost everything he's describing is the same. Except I installed a gapps.zip and then it wouldn't boot after that. No matter what I flash, it either gives me a status 7 error and aborts the install or it may "install successfully" but it never boots. Also tried the pc36img.zip as well. I had a nandroid backup and tried to restore that, but that aborts saying cannot flash boot image. Tried a rooted and also an unrooted stock ruu, they won't work and the .exe version on a pc can't find my phone when I plug it in and power it on. Anyone have any Ideas for me. I can get more specific error messages and hboot numbers, etc. if needed.
I think you should get Amon recovery PCIMG zip file and change recovries and try everything again... IMO
Edit: I posted the Amon file and all you have to do is rename it to PCIMG.zip. Also I think the gapps you were looking for you can find on the cm site itself or within that thread. Sorry if it sounds like I a being negative but I see alot of people get on noob and I wondered why but unfortunately its because things like this happen. In the OP for CM6 it says to use Amon and backup your keys. Now if you get your phone backup you got to first check and make sure your RSA keys are in tact unless you backed them up already.
Joeykrim has a app on the market to check or there are numerous threads on what to do. Sorry and hope it works out for you if not INS is your friend
View attachment PC36IMG-Amon-V2.2.1.zip
playya said:
I think you should get Amon recovery PCIMG zip file and change recovries and try everything again... IMO
Click to expand...
Click to collapse
some people dont like clockwork with the evo's...thats just the general feeling im getting from the boards. i just got my evo rooted and what not. i use clockwork and it has worked well for what i need.
op, try amon like has been suggested.
tailsthecat3 said:
some people dont like clockwork with the evo's...thats just the general feeling im getting from the boards. i just got my evo rooted and what not. i use clockwork and it has worked well for what i need.
op, try amon like has been suggested.
Click to expand...
Click to collapse
Yea but have you tried Amon and from what I read and this is from developers Amon has a much better handle on things as far as backing stuff up, partitions and protection of keys.
I ran Clockwork on my wifes phone because to me its simple and works with Rom manager but after a while I just said F it and switched since it was messing up my backups. Hey to each his own..
Ok, I don't believe that your device is bricked. You may have flash the wrong gapps or something, but is should be easy to fix.
First, download these 3 files and put them on the root of your SD card:
Cyanogen 6 stable for evo
Latest gapps for HDPI
Calkulin's format all
Red through first, then follow my instructions EXACTLY:
1.) Boot into recovery.
2.) Flash Calkulin's all format. This will wipe everything that needs wiping. (everything but the SD card)
3.) Without exiting recovery immediately flash the CM6 .zip. Do not flash the gapps yet.
4.) Reboot the device now. It will boot into cyanogen, but will not have market or anything. Once fully booted, reboot to recovery.
5.) Do not wipe or anything, just flash the gapps HDPI.
6.) Boot the phone and enjoy.
Evo won't load any roms, can only get into clockwork recovery
Okay, so if I try your steps, just like before The install gets almost to the end, then I get:
"assert failed: write_raw_image ("/tmp/boot.img","boot")
E:Error in /sdcard/update-cm-6.1.2-supersonic-signed.zip
(Status 7)
Installation aborted.
Sorry Playya, I wanted to try this one more time first. I'm going to try loading Amon Ra now. do I need to rename it to pcimg.zip or should i just flash the current file name?
In case it helps anyone, I have
ClockworkMod Recovery v2.5.0.1
my boot loader screen shows
SUPERSONIC EVT3 SHIP S-OFF
HBOOT-2.10.0001
MICROP-041f
TOUBH PANEL-ATMELC03_16ac
RADIO-2.15.00.11.19
Oct 15 2010
Awesome, Amon Ra Worked, and now i'm up and running on cyanogen mod with google apps as well. My only problem now, is I can't backup, when I try it says oops... something went wrong! Please check the recovery log!
hcavlnch said:
Awesome, Amon Ra Worked, and now i'm up and running on cyanogen mod with google apps as well. My only problem now, is I can't backup, when I try it says oops... something went wrong! Please check the recovery log!
Click to expand...
Click to collapse
it may say oops if you battery level is low... I think Amon is so much better its just that Unrevoked puts Clockwork in with their root so people get lazy and leave it in... Amon - its the way to go.
1. Charge your battery and try again
2. Backup your wimax keys - then check how big the file is and hopefully its like 12 megs... If so keys may be ok
I know I've seen other people with this problem, but I don't think I've seen a fix but I'm hoping I'm wrong.
Installed CM7 RC2 and everything works great for a month. Some random reboots but no big deal. Today I get a reboot but instead of reloading it hangs on the CM7 boot logo. I go into clockwork recovery, do a full wipe, and reboot. From then on, all I can do is loop in the white HTC screen. No ROM, no Recovery.
I've tried to flash Amon Ra recovery and a stock RUU via at PCImag file. No love. Any ideas?
BrashL said:
I know I've seen other people with this problem, but I don't think I've seen a fix but I'm hoping I'm wrong.
Installed CM7 RC2 and everything works great for a month. Some random reboots but no big deal. Today I get a reboot but instead of reloading it hangs on the CM7 boot logo. I go into clockwork recovery, do a full wipe, and reboot. From then on, all I can do is loop in the white HTC screen. No ROM, no Recovery.
I've tried to flash Amon Ra recovery and a stock RUU via at PCImag file. No love. Any ideas?
Click to expand...
Click to collapse
I posted directions in reply to your PM. Here's the first thing to try. See if you can flash this, it's Amon Ra recovery v2.3
k2buckley said:
I posted directions in reply to your PM. Here's the first thing to try. See if you can flash this, it's Amon Ra recovery v2.3
Click to expand...
Click to collapse
DONT FLASH IT.
Put in root of sdcard, boot into bootloader, update, let it boot or boot into recovery.
Lol, I gave him detailed instructions on how to flash it using the bootloader, don't worry. I was pm ing with him.
Sent from my PC36100 using XDA App
r916 said:
DONT FLASH IT.
Put in root of sdcard, boot into bootloader, update, let it boot or boot into recovery.
Click to expand...
Click to collapse
He uploaded a recovery image in a PC36IMG, so it NEEDS to be flashed in the bootloader.
Ive had the same problem for two days now and have tried everything in the book it seems. Using fastboot or manually from the bootloader, every pc36img.zip fails with an error at (8) partition update failed! or remote : 51 partition update fail. I can get the newest ruu to get me stuck at the four triangle error and then I have to flash PC36IMG_AmonRA-v2.3-hausmod_revA.zip just to get back to the htc boot screen loop (which at least lets me get back to bootloader to start the vicious cycle again) . ANY help would be greatly appreciated. Heck, even any way to make it presentable at a sprint store would even work at this point (since it says s-off I'm guessing someone in the line of repair will realize its been rooted.
p.s. I have never had any problem with my phone and have flashed just about every rom out there and I always do a full wipe and usually a format_all too. This happened about two hours after I flashed Kings UNleashed Ultra Blakk R3 ( it just did a reboot on its own and its been in this mess ever since)
100proof said:
Ive had the same problem for two days now and have tried everything in the book it seems. Using fastboot or manually from the bootloader, every pc36img.zip fails with an error at (8) partition update failed! or remote : 51 partition update fail. I can get the newest ruu to get me stuck at the four triangle error and then I have to flash PC36IMG_AmonRA-v2.3-hausmod_revA.zip just to get back to the htc boot screen loop (which at least lets me get back to bootloader to start the vicious cycle again) . ANY help would be greatly appreciated. Heck, even any way to make it presentable at a sprint store would even work at this point (since it says s-off I'm guessing someone in the line of repair will realize its been rooted.
p.s. I have never had any problem with my phone and have flashed just about every rom out there and I always do a full wipe and usually a format_all too. This happened about two hours after I flashed Kings UNleashed Ultra Blakk R3 ( it just did a reboot on its own and its been in this mess ever since)
Click to expand...
Click to collapse
Once you've gotten back into recovery, specifically, amon RA 2.3, use the MS-USB menu and copy the contents of your SD card onto an external disk drive. Afterwards, use amon RA to partition and reformat your card. When you're done, copy only the Rom and amon RA (PC36IMG) file to your SD card. Shut down your device. Now while pressing the down volume key, press the power button to enter the hboot screen and pay attention to see whether or not you still have S-OFF. If you do not, you need to re-root. If you do, great. Reflash amon RA and afterwards, reboot into recovery and flash the rom.
Just Me, D
via the XDA Premium app
Think we have different problems. Every time I try to flash something new it completes fine, but it still boot loops. Hell, yours might be fixable.
I've tried everything now with no luck. Everything updates and completes but has absolutely no effect on the boot looping. This is really insane and my advice to anyone would be to stop using CM7 immediately as it seems to be confined to that ROM.
If anyone else has had this exact problem please post, I want to get a tally of how many people are affected and try to find a commonality.
Bootlooping is caused by incorrectly flashing, or flashing something that the phone "doesn't like," whether it be a kernel, a theme, ect.
teh roxxorz said:
Bootlooping is caused by incorrectly flashing, or flashing something that the phone "doesn't like," whether it be a kernel, a theme, ect.
Click to expand...
Click to collapse
But my phone ran for a month without any problems except for some random reboots which seem to be common with this phone in general. I didn't add software or flash anything before this happened, it just happened. That seems to be the experience most people are having, the only thing in common is that they were running CM7 or had been running it recently and tried to flash to a different rom.
What software problem wouldn't be corrected by a successfully completed reflash with a stock RUU? That's the major question.
Hmm, that is awkward; at that point, I would just take it in if you're still getting random reboots. Been on CM7 for the longest and no random reboots on my end.
teh roxxorz said:
Bootlooping is caused by incorrectly flashing, or flashing something that the phone "doesn't like," whether it be a kernel, a theme, ect.
Click to expand...
Click to collapse
EXACTLY! and thus the reason I wanted the OP to follow the directions I gave. Being that he or she would have had a completely fresh recovery, a freshly partitioned & formatted SD card and only the rom on the card to flash, barring a mechanical issue, the only possible explanation would be a corrupted rom zip file or a corrupted nandroid backup if that is what was being used. Corruption happens. The OP should re-download a fresh copy of the rom, re-wipe and re-flash, at least in my opinion....
dougjamal said:
EXACTLY! and thus the reason I wanted the OP to follow the directions I gave. Being that he or she would have had a completely fresh recovery, a freshly partitioned & formatted SD card and only the rom on the card to flash, barring a mechanical issue, the only possible explanation would be a corrupted rom zip file or a corrupted nandroid backup if that is what was being used. Corruption happens. The OP should re-download a fresh copy of the rom, re-wipe and re-flash, at least in my opinion....
Click to expand...
Click to collapse
I agree, that is exactly what they should.
dougjamal said:
EXACTLY! and thus the reason I wanted the OP to follow the directions I gave. Being that he or she would have had a completely fresh recovery, a freshly partitioned & formatted SD card and only the rom on the card to flash, barring a mechanical issue, the only possible explanation would be a corrupted rom zip file or a corrupted nandroid backup if that is what was being used. Corruption happens. The OP should re-download a fresh copy of the rom, re-wipe and re-flash, at least in my opinion....
Click to expand...
Click to collapse
I would love to, but I can't load any recovery. I've tried to flash amon ra and clockwork, and all seem to flash ok, but on reboot it's back to boot loop even if I try to go into recovery.
BrashL said:
I would love to, but I can't load any recovery. I've tried to flash amon ra and clockwork, and all seem to flash ok, but on reboot it's back to boot loop even if I try to go into recovery.
Click to expand...
Click to collapse
Try flashing amon_ra 2.3....place on sdcard, go into the bootloader, update,reboot, then try the bootloader. But before you do, select clear storage, which will do a factory reset, to see if that helps.
teh roxxorz said:
Try flashing amon_ra 2.3....place on sdcard, go into the bootloader, update,reboot, then try the bootloader. But before you do, select clear storage, which will do a factory reset, to see if that helps.
Click to expand...
Click to collapse
Already tried it, no dice. Goes through fine but then keeps bootlooping. On a side note, is there a way to get S-On through the bootloader since I can't access recovery?
You would have to download the RUU exe and then run the phone in fastboot while connected to the pc.
teh roxxorz said:
You would have to download the RUU exe and then run the phone in fastboot while connected to the pc.
Click to expand...
Click to collapse
Did that buy still S-Off
http://www.shipped-roms.com/shipped/Supersonic/ Did you run the right RUU for your software version?
And I'm heading tot he gym for ~1hr; you can pm me in the meantime and I'll answer when I get back if you still need assistance.
dougjamal said:
Once you've gotten back into recovery, specifically, amon RA 2.3, use the MS-USB menu and copy the contents of your SD card onto an external disk drive. Afterwards, use amon RA to partition and reformat your card. When you're done, copy only the Rom and amon RA (PC36IMG) file to your SD card. Shut down your device. Now while pressing the down volume key, press the power button to enter the hboot screen and pay attention to see whether or not you still have S-OFF. If you do not, you need to re-root. If you do, great. Reflash amon RA and afterwards, reboot into recovery and flash the rom.
Just Me, D
via the XDA Premium app
Click to expand...
Click to collapse
I'm sorry I wasn't clear . Days of reading every post in any thread I can find has left me running on no sleep. The huge problem is that no matter what recovery rom is flashed it wont let me boot into RECOVERY MODE. It flashes fine whether it is from the sd or through cmd using fastboot (Ive tried almost every version including the newest of both Amen RA and Clockwork). This gets me stuck in the white HTC screen boot loop. If I flash a RUU it will at least hang with a partition error and get stuck in the four triangle error, which will at least let you charge the battery so I can start all over again. Is there maybe a way to wipe the partition or reformat in fastboot as that is really the only thing working (regular adb wont detect). It seems a ton of people have been popping up with this same problem out of the blue the last few days.
hello all, noob here. searched the forums already, not quite the same problem here.
I just rooted my phone with unrevoked 3.32, had zero problems. I confirmed that i had nand unlocked in hboot (says S-OFF). I started up my phone without problems after rooting, checked and I had superuser permissions in the app drawer. i then proceeded to download busybox, rom manager, my backup for root, and titanium backup from the market, but I did NOT open any of them. I thought I would do a nandroid backup first.
I rebooted into hboot, went to recovery. this started up clockworkmod (that came with unrevoked 3.32), went to backup and restore, and hit nandroid backup. It completed, said done, then i selected "go back" and selected the first option, reboot system now.
I then tried to turn my phone on, just regular power on not into hboot, and i get stuck at the white htc evo 4g screen, it then reboots, and continues to cycle up to that point.
I have NOT flashed anything other than rooting my phone. i haven't wiped anything, done anything else than what i have there.
Hboot version is 2.10
radio version says 2.15.00.11.19
clockworkmod version is 2.6.0.1
EVO is from June 2010, not a new evo.
I can get into hboot and recovery, no problems, but i can't startup the phone.
Please help! i just want to start up the phone, don't want to flash anything yet. Thanks in advance.
Maybe its the busybox that you downloaded. You should hit up recovery and do a full wipe! The start up again. What rom are you running, most roms have busybox included so when you download it I've seen phones get the white screen of death. Grab a rom and reflash it. Since you put busybox that nandroid you made probably is no good. Reason I'm telling you all this is because has happened to me before. Good luck
Sent from my PC36100 using XDA Premium App
ravissimo said:
hello all, noob here. searched the forums already, not quite the same problem here.
I just rooted my phone with unrevoked 3.32, had zero problems. I confirmed that i had nand unlocked in hboot (says S-OFF). I started up my phone without problems after rooting, checked and I had superuser permissions in the app drawer. i then proceeded to download busybox, rom manager, my backup for root, and titanium backup from the market, but I did NOT open any of them. I thought I would do a nandroid backup first.
I rebooted into hboot, went to recovery. this started up clockworkmod (that came with unrevoked 3.32), went to backup and restore, and hit nandroid backup. It completed, said done, then i selected "go back" and selected the first option, reboot system now.
I then tried to turn my phone on, just regular power on not into hboot, and i get stuck at the white htc evo 4g screen, it then reboots, and continues to cycle up to that point.
I have NOT flashed anything other than rooting my phone. i haven't wiped anything, done anything else than what i have there.
Hboot version is 2.10
radio version says 2.15.00.11.19
clockworkmod version is 2.6.0.1
EVO is from June 2010, not a new evo.
I can get into hboot and recovery, no problems, but i can't startup the phone.
Please help! i just want to start up the phone, don't want to flash anything yet. Thanks in advance.
Click to expand...
Click to collapse
Well, I'm not sure what exactly went wrong for ya, but I might suspect it was something to do with some of the apps you downloaded prior to making your backup. The first thing to try, would be to boot to recovery, and wipe cache, and then go to 'advanced' and wipe dalvik cache. Then try to reboot. If that fails, then you're next option (without flashing a new ROM) is to do a data/factory reset. You will however lose all of your apps, settings, contacts, texts, etc. You unfortunately don't really have any other options, unless wiping cache's helps you out. If a factory reset doesn't allow you to boot, then you're most likely going to have to flash a new ROM. And also, I thought that Unrevoked flashed the latest clockwork recovery, which would be 3.0 or somehting like that, no?
Hi k2buckley,
So I tried wiping the cache and the dalvik cache then rebooted, no luck. Does this mean the nandroid backup I made is also corrupt? Restoring that won't do anything will it? So the options are to do a factory reset or flash a new rom? If I lost everything anyway, I might as well try to flash a new rom.
However, to clarify, I didn't "install" busybox. I downloaded the app but I didn't open it up and click install. So even if I flash a new rom, then I install busybox and do a nandroid backup it will work? If so, why didn't it work this time? If I do a factory reset, then do the same thing and install busybox, will the same thing happen? Is busybox incompatible with the sense froyo that comes from the sprint OTA?
ravissimo said:
Hi k2buckley,
So I tried wiping the cache and the dalvik cache then rebooted, no luck. Does this mean the nandroid backup I made is also corrupt? Restoring that won't do anything will it? So the options are to do a factory reset or flash a new rom? If I lost everything anyway, I might as well try to flash a new rom.
However, to clarify, I didn't "install" busybox. I downloaded the app but I didn't open it up and click install. So even if I flash a new rom, then I install busybox and do a nandroid backup it will work? If so, why didn't it work this time? If I do a factory reset, then do the same thing and install busybox, will the same thing happen? Is busybox incompatible with the sense froyo that comes from the sprint OTA?
Click to expand...
Click to collapse
You don't need to download busy box, I would delete that app. If you flash a rooted rom it should already have busybox; if you just rooted your phone and want to download busybox on your current stock rom then it will be ok. I would wipe and flash a new rom just to be safe.
Sent from my PC36100 using XDA Premium App
ravissimo said:
Hi k2buckley,
So I tried wiping the cache and the dalvik cache then rebooted, no luck. Does this mean the nandroid backup I made is also corrupt? Restoring that won't do anything will it? So the options are to do a factory reset or flash a new rom? If I lost everything anyway, I might as well try to flash a new rom.
However, to clarify, I didn't "install" busybox. I downloaded the app but I didn't open it up and click install. So even if I flash a new rom, then I install busybox and do a nandroid backup it will work? If so, why didn't it work this time? If I do a factory reset, then do the same thing and install busybox, will the same thing happen? Is busybox incompatible with the sense froyo that comes from the sprint OTA?
Click to expand...
Click to collapse
Well, I'm not exactly sure why you want to download busy box so badly. Any rom comes with busy box cooked in. I have only once installed busy box. The only time i remember having to do it, was Immediately after I rooted with Unrevoked, i went to use Titanium, and had some error. I hit the problems button and that updated busy box from there. Other than that, I've never messed with it.
And yes, most likely your nandroid backup is not going to be of any value to you. You could try restoring it if you'd like, but I predict it would be a waste of time. And I'm not sure that it matters that you didn't 'open' and click install on busy box. If you downloaded it from the market, wouldn't it just download and install itself automatically? I would just flash a rom, and be done with it. Roll with whatever version of busy box comes with the ROM you flash. As you said, you're only option is a factory reset now, and if you're going to do that, you certainly may as well flash a custom rom at the same time. You just need to download a rom, and put it on your sd card. You can mount the sd card as a disk drive to your computer from within recovery. I use amon ra, and its called USB MS TOGGLE. I'm not sure what it's called in clockwork, but the option is there. So put the rom on your sd card, perform a complete wipe, (i'd flash calkulin's format all.zip as well), flash a rom, reboot, and forget about anything with busy box. It will be installed on the rom already.
If you download busybox from the market and it already has it built in the rom you might bork the rom and get a bootloop. Try it and see for yourself !
Sent from my PC36100 using XDA Premium App
Well, the only reason I download busybox was because I wanted to use titanium backup and it is required. Other than that, I could care less about it. It does not install automatically after downloading. You have to go into the app and choose which version you want to install and I didn't install it. The thing is I didn't want to install any roms in the first place. I wanted to just root the phone for the purpose of wifi tethering. So basically my better option is doing a factory reset.
I won't be able to do this til I get home in a few hours, so if anyone else has any suggestions on how to fix this without losing my data, I would appreciate any tips. Thanks.
If you can get a logcat that should show what is causing it to bootloop. It's 'adb logcat > logcat.txt' to do it, run that and wait for it to loop 3 or 4 times before pushing Ctrl+C to stop it.
Busybox isn't included in the ROM because I didn't flash a ROM! I'm using the sense 2.2 froyo Ron that comes from sprint and HTC. I didn't flash anything as I stated in the title. I just did a nandroid backup and now my phone won't boot.
ravissimo said:
Well, the only reason I download busybox was because I wanted to use titanium backup and it is required. Other than that, I could care less about it. It does not install automatically after downloading. You have to go into the app and choose which version you want to install and I didn't install it. The thing is I didn't want to install any roms in the first place. I wanted to just root the phone for the purpose of wifi tethering. So basically my better option is doing a factory reset.
I won't be able to do this til I get home in a few hours, so if anyone else has any suggestions on how to fix this without losing my data, I would appreciate any tips. Thanks.
Click to expand...
Click to collapse
Right. But unfortunately now, your data seems to be lost. Did a factory reset help anything? If not, you got to wipe and reflash a rom.
Sent from my PC36100 using XDA App
ravissimo said:
Busybox isn't included in the ROM because I didn't flash a ROM! I'm using the sense 2.2 froyo Ron that comes from sprint and HTC. I didn't flash anything as I stated in the title. I just did a nandroid backup and now my phone won't boot.
Click to expand...
Click to collapse
I understand that. As I stated, I'm not sure what's causing your problem. As xhausx said, try getting a logcat
Sent from my PC36100 using XDA App
What method of rooting did you use? What recovery do you have right now? As hausx said you could do a logcat and he'll check it out!
Sent from my PC36100 using XDA Premium App
Hi xHausx,
I will have to wait til I get home to try that, but how do I get into the prompt to type that in dos. Do I need to run anything in hboot or clockworkmod before connecting my Phone and trying that? I am a noob, so even though I've read a lot before rooting, I don't know much. Please assume I need a step by step. Thanks again.
ravissimo said:
Hi xHausx,
I will have to wait til I get home to try that, but how do I get into the prompt to type that in dos. Do I need to run anything in hboot or clockworkmod before connecting my Phone and trying that? I am a noob, so even though I've read a lot before rooting, I don't know much. Please assume I need a step by step. Thanks again.
Click to expand...
Click to collapse
You can use the root tools zip from the link in my sig to get to adb, there is a script in there called OpenShell that will bring up a dos prompt in the right folder. Rooting should have enabled adb during boot so you should be ok on that end.
xHausx said:
You can use the root tools zip from the link in my sig to get to adb, there is a script in there called OpenShell that will bring up a dos prompt in the right folder. Rooting should have enabled adb during boot so you should be ok on that end.
Click to expand...
Click to collapse
OK, so I downloaded and extracted the auto-root tools only zip from your sig, and then ran OpenShell.bat and typed as you said "adb logcat > logcat.txt" with my phone plugged in. said "waiting for device" and then i turned on my phone and let it boot 4-5 times before ctrl+c and pulling the usb. all the logcat.txt says is...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
am i doing something wrong?
my apologies, i've only throughly read on how to root, i hadn't gotten into flashing or anything else yet. just been on xda site for a few days now reading all i could about rooting (which went fine, but now i'm screwed).
dirkyd3rk said:
If you download busybox from the market and it already has it built in the rom you might bork the rom and get a bootloop. Try it and see for yourself !
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
For the hell of it I did just that and it did bork it.... lmao
chefdave12118 said:
For the hell of it I did just that and it did bork it.... lmao
Click to expand...
Click to collapse
Did it really? Lol It did it to me man I was pissed!
chefdave12118 said:
For the hell of it I did just that and it did bork it.... lmao
Click to expand...
Click to collapse
man, for the life of me, i can't believe i didn't do a nandroid before i downloaded the app. for some reason i thought only downloading an app from the market, not flashing anything or whatever, would not screw up my phone.
anyway, since my data is lost, i wanted to try again. can i flash the unrevoked S-ON utility and then the latest Sprint RUU and then re-root? i read somewhere else that it won't remove my wimax/RSA keys or SD card, is that correct? is there a way to backup my RSA keys before I do anything else? should i do that, re-root, then nandroid, then mess with stuff? i basically wanted a stock Sprint EVO but one that's rooted so i can run root-based apps, that's what I want to get to.
Flash the Amon Ra recovery via the AR pc36img.zip file in hboot method, then reboot to recovery, do a full wipe/factory reset and try to boot to system.