Develop Bugs

[q] odin v3+1.61

I really can't get this program to work. I followed the wiki to the T. Neither of the 3 options work. The only thing i notice that is different is the 3 option
If you get a FAILED error after it writes "param.lfs", try this method:
1. Reboot the phone and reset Odin
2. Load the pit file and place the tar in the Phone section
3. Start the recovery
4. The process will hang while writing "factoryfs.rfs"
5. Reboot the phone and reset Odin
^^ I never get factoryfs.rfs just the same old param.lfs error
I came from EB13 & did one click root clockwork 3.0.0.5/6. After i tried to boot into recovery it coverted everything into EXT4 when the phone did not work after that i tried to use Odin to flash back to EB13. I was able to apply syndicateROM through clockwork but it still does not turn on. When i try to turn on my device I don't get the Samsung boot logo i get 2 icons. Left icon is a phone right icon is a computer...really don't know what else to do. Appreciate any help

Try using Odin without the pit file and put the tar in the PDA section. If that doesn't work try redownloading the tar file again. It might have been a bad download.
Sent From My Evo Killer!

Unfortunately I tried that already. Redownloaded and without the pit file

Try a different USB cable - the stock one sucks.

castkel said:
I really can't get this program to work. I followed the wiki to the T. Neither of the 3 options work. The only thing i notice that is different is the 3 option
If you get a FAILED error after it writes "param.lfs", try this method:
[SIZE="6" This worked for me -- disclaimer : i do not take responsibility if your car dies your phones blows up in a bundle of fire or cant work if cats fly and scratch your face if gas prices go to $5 ----- but this might help you [/SIZE][/COLOR]
1. Reboot the phone and reset Odin
2. Load the pit file and place the tar in the Phone section
3. Start the recovery
4. The process will hang while writing "factoryfs.rfs"
5. Reboot the phone and reset Odin
^^ I never get factoryfs.rfs just the same old param.lfs error
I came from EB13 & did one click root clockwork 3.0.0.5/6. After i tried to boot into recovery it coverted everything into EXT4 when the phone did not work after that i tried to use Odin to flash back to EB13. I was able to apply syndicateROM through clockwork but it still does not turn on. When i try to turn on my device I don't get the Samsung boot logo i get 2 icons. Left icon is a phone right icon is a computer...really don't know what else to do. Appreciate any help[/QUOTE]
youtube odin and you should get a vid help
1. restart your computer
2. take the battery out your phone wait till your computer reset
3. put the battery back into the phone WHEN COMPUTER HAS FULLY STARTED UP
4. open ODIN ... [url]http://www.mediafire.com/?5w7sb1iq7webt4l[/url] just incase u didnt have it already
5. phone in download mode the number 1 and power button
6. plug it into the computer you should see your phone in a higlight yellow code pop up in ODIN ...
7. there are 2 things checked 1 called AUTO REBOOT ( [COLOR="Red"]leave it checked )
8. UNCHECK THE F RESET TIME
9. just load the TAR into PDA . for whatever phone ur using .......... if you need to download a new tar then do so best wat to find multiple versions is usually GOOGLE IT EX: samsung epic eb13 tar
10. ONLY PDA
1.. hit start and watch the MAGIC HAPPEN
Click to expand...
Click to collapse

k0nane said:
Try a different USB cable - the stock one sucks.
Click to expand...
Click to collapse
Yeah the stock one doesn't even work for me. Windows 7 doesn't recognize it I'm actually using the HTC evo cable. This cable has flashed a Moment and Intercept several times

I seen the video as well. I wish mine worked that flawless. I even tried a different PC. Back/front usb ports. Same difference always hangs at the same error "param.lfs"

pit files for i317 and i317m

As a general FYI, if you think you need to repartition your phone it is also possible that your phone has experienced:
a) A hardware issue, possibly partial or total emmc failure.
b) A mismatch between bootloader (sboot.bin) and trustzone (tz.img) versions. See this post or my MK6 stock thread for some possible options to fix this.
As a step of last resort to recreate the partition table on your phone, a pit file may be what you need. This can be done in either Odin or Heimdall.
Warning - repartitioning your phone may erase all data and might cause other unintended consequences. You assume all risk.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
To use a pit file in Odin, this is typically done as part of a flashing a stock rom package, like the LJ2 or MA4 package for the i317 (or similar package for the i317m). You specify the pit file in the PIT section, make sure the repartition box is checked, and then add the rom package in the PDA section like usual.
If you are running an official 4.3 or later bootloader you will not be able to successfully flash a stock firmware package that contains earlier bootloaders - Odin will hang and you will need to find a different stock package to flash that does not contain a bootloader. (i.e. If you took the the i317 4.3 OTA and are running the MK6 bootloader or a later bootloader, you'll want to avoid UCAMA4)
The attached zip includes pit files for both the i317 and the i317m. The partition mapping is the same for both (see the included analysis files), but the pit files have unique security signatures which are accepted only by the bootloader of the specific model phone for which they are intended. I've tested the file for the i317 and can confirm that it works as intended. The file for the i317m was pulled the same way by an XDA member (thanks @plemen !) with an i317m and I've confirmed it is formatted correctly. It has now been confirmed as working.

If you want to learn a bit more about pit files, check out this thread by Adam Outler:
http://forum.xda-developers.com/showthread.php?t=2540480

Very interested in this, as I need the pit file for my I317. Question about the bootloader, though.... I've never taken an OTA, just flashing CM and OmniROM nightlies (was on 4.4.2 when my phone committed suicide). Should I be safe to use this pit file? And what factory firmware would you recommend to go with it?

pit files should be back in a day or two (I'll be testing over the weekend).
Depending on what happened to your phone it's still highly probable that your pit (partition) data is fine. There's a way to confirm this using Heimdall - when time permits I'll add instructions to post #2. That's a safer first step than attempting a repartition.
As for bootloader and firmware - if you've never taken an OTA, and you're not on a 4.3 bootloader your best bet for stock firmware is UCAMA4. It's a more complete and somewhat newer package than the other option (UCALJ2). You can get this from sammobile, or a mirror copy I have linked in post #2 here:
http://forum.xda-developers.com/showthread.php?t=2589891
that post also has information on a couple apps you can load that will allow you to check which bootloader you have loaded once your phone is operational.

Thanks for doing this! Did you have any luck over the weekend? Looking to re-partition as I'm unable to mount.

anine said:
Thanks for doing this! Did you have any luck over the weekend? Looking to re-partition as I'm unable to mount.
Click to expand...
Click to collapse
I expected a test phone on Saturday that didn't arrive until Tuesday thanks to the USPS getting the day off on Monday. Once I confirm the files work as intended I will repost them.
As for the issue you are having - what partition isn't mounting? Can you provide more detail?

Zen Arcade said:
I expected a test phone on Saturday that didn't arrive until Tuesday thanks to the USPS getting the day off on Monday. Once I confirm the files work as intended I will repost them.
As for the issue you are having - what partition isn't mounting? Can you provide more detail?
Click to expand...
Click to collapse
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.

Help
anine said:
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.
Click to expand...
Click to collapse
I desperately need this PIT file as well.. not on 4.3 however..I can get to download mode and into recovery but it spits a bunch of errors about unable to mount /cache etc...

anine said:
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.
Click to expand...
Click to collapse
The symptoms you describe are similar to those I've seen on the Q&A forum recently. I don't want to be the bearer of bad tidings, but I suspect you have a partial emmc (hardware) failure.
My time during the week is limited so I expect to have testing done this weekend.

terpencar said:
I desperately need this PIT file as well.. not on 4.3 however..I can get to download mode and into recovery but it spits a bunch of errors about unable to mount /cache etc...
Click to expand...
Click to collapse
I had similar issue, and was able to resolve it by following this thread. YOu need to restore factory original by following this thread from XDA.
Please don't forget to Thank
The files provided are only for phone I317 and not I317M
http://www.androidfilehost.com/?fid=23060877490003986
Instructions:
1. Download "back to stock" zip folder I uploaded. It contains all the files needed. No need to search around.
2. Unzip the file and extract the folder to your desktop.
3. Open folder and install Samsung drivers if not already done so.
4. Now make sure you have root and custom recovery on the phone. Turn the phone off. Hold volume up, home and power button at the same time.Wait till u see custom recovery screen and then let go off all the buttons.
5. Once in recovery... delete data, system, cache, dev cache like you want to flash a new rom. Turn the phone off by pulling the battery or see option for power off device under custom recovery.
6. Once the phone is completely off lets get into download mode. Hold volume down, home and power button until you see the screen with an option to press volume up to get into download. Press volume up to enter download mode when asked.
7. Now open odin3.07 I provided in the folder u downloaded. Once open connect your phone via usb. Windows should install device drivers. Once thats done, you should see com## on the Odin software.
8. On odin software you should see button called PDA. Click on it and browse to the file called KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user _low_ship.tar. in the folder provided by me. select it and hit ok. Odin will process the file. It will take max 2 to 3 min.
9. Before you click start on Odin make sure auto reboot and F. reset time is checked only. Everything else unchecked. Click start button. Odin will start flashing the factory firmware. It will take time.
10. Once Odin is done flashing. phone will reboot. Now you can disconnect the usb cable. When phone is fully rebooted, skip all the prompt and get to home screen.
11. Turn the phone off again and get into download mode. Connect usb cable to computer with Odin open. Click Pda and select file called CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar. Let Odin process it and then click start. Once flashing the root file is done. Phone should reboot to home screen. Now you have root. The reason we need root is to get rid of counter # in download more. It should say zero.
12. Connect your phone to computer while on the home screen. Open phone internal storage and go to download folder and copy Triangle away.apk into it.
13. Go into settings and security and check unknown sources.
14. Go to apps and open application "my file". Go to download folder and select triangle away application to install. install it. Open application application and scroll down and select reset counter option. Make sure your are connected to wifi. Confirm you phone is I317 and triangle away will download the file. Your phone should reboot into some type of reset counter recovery screen. follow the instruction on the screen to reset the counter. After that phone should reboot.
15. Once rebooted uninstall triangle away apk. Now open super user application and scrool down and click fully unroot. When done go into stock recovery and clear data and cache. reboot phone. All done. Your counter is set to zero. Your phone should read normal under settings.
You can update your phone under settings from att servers.
Enjoy.
Thanks to chainfire for his triangle away app and root for our device.

rob_z11 said:
I had similar issue, and was able to resolve it by following this thread. YOu need to restore factory original by following this thread from XDA.
Please don't forget to Thank
The files provided are only for phone I317 and not I317M
Instructions:
1. Download "back to stock" zip folder I uploaded. It contains all the files needed. No need to search around.
2. Unzip the file and extract the folder to your desktop.
3. Open folder and install Samsung drivers if not already done so.
4. Now make sure you have root and custom recovery on the phone. Turn the phone off. Hold volume up, home and power button at the same time.Wait till u see custom recovery screen and then let go off all the buttons.
5. Once in recovery... delete data, system, cache, dev cache like you want to flash a new rom. Turn the phone off by pulling the battery or see option for power off device under custom recovery.
6. Once the phone is completely off lets get into download mode. Hold volume down, home and power button until you see the screen with an option to press volume up to get into download. Press volume up to enter download mode when asked.
7. Now open odin3.07 I provided in the folder u downloaded. Once open connect your phone via usb. Windows should install device drivers. Once thats done, you should see com## on the Odin software.
8. On odin software you should see button called PDA. Click on it and browse to the file called KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user _low_ship.tar. in the folder provided by me. select it and hit ok. Odin will process the file. It will take max 2 to 3 min.
9. Before you click start on Odin make sure auto reboot and F. reset time is checked only. Everything else unchecked. Click start button. Odin will start flashing the factory firmware. It will take time.
10. Once Odin is done flashing. phone will reboot. Now you can disconnect the usb cable. When phone is fully rebooted, skip all the prompt and get to home screen.
11. Turn the phone off again and get into download mode. Connect usb cable to computer with Odin open. Click Pda and select file called CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar. Let Odin process it and then click start. Once flashing the root file is done. Phone should reboot to home screen. Now you have root. The reason we need root is to get rid of counter # in download more. It should say zero.
12. Connect your phone to computer while on the home screen. Open phone internal storage and go to download folder and copy Triangle away.apk into it.
13. Go into settings and security and check unknown sources.
14. Go to apps and open application "my file". Go to download folder and select triangle away application to install. install it. Open application application and scroll down and select reset counter option. Make sure your are connected to wifi. Confirm you phone is I317 and triangle away will download the file. Your phone should reboot into some type of reset counter recovery screen. follow the instruction on the screen to reset the counter. After that phone should reboot.
15. Once rebooted uninstall triangle away apk. Now open super user application and scrool down and click fully unroot. When done go into stock recovery and clear data and cache. reboot phone. All done. Your counter is set to zero. Your phone should read normal under settings.
You can update your phone under settings from att servers.
Enjoy.
Thanks to chainfire for his triangle away app and root for our device.
Click to expand...
Click to collapse
Thanks.. It just hangs at system.img in odin

Nice job Zen
Sent from my SGH-I317 using XDA Premium 4 mobile app

Pit files are back up and attached to the OP. The i317 pit file is tested and confirmed working.
The i317m file is identical, except for the security signature. I'm currently looking for someone with a healthy i317m willing to test flash the i317m pit file to confirm it works. (I would do this myself, but I don't have an i317m).

Unfortunately it did not work for me. emmc failure suspected. Strange thing is that in ODIN I can still "Successfully" install a ROM.. and even the PIT file succeeded. I still got a logo screen for several minutes.
Fortunately for me, I have an additional mainboard from a otherwise damaged note 2. I'll be swapping that out.
Thank you anyway. Hope your file helps others!

My phone was not booting and stopped at Samsung logo. After the pit file and stock rom, my phone is live again. I am still having issue with storage but at least I have good starting point.
thanks

Works fine on i317m

anine said:
Unfortunately it did not work for me. emmc failure suspected. Strange thing is that in ODIN I can still "Successfully" install a ROM.. and even the PIT file succeeded. I still got a logo screen for several minutes.
Fortunately for me, I have an additional mainboard from a otherwise damaged note 2. I'll be swapping that out.
Thank you anyway. Hope your file helps others!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2626593

qkster said:
http://forum.xda-developers.com/showthread.php?t=2626593
Click to expand...
Click to collapse
See posts #9 and #13 on the thread above for the specific potential solution to try.

Corrupt pit file it says. for note 2 att help
I have a Att note 2 i flash the mj9 firmware using mobile odin first. Then i formatted storage, data, system, and cache. And now its says i have NO ios Installed with is true but when i try flashing another rom in TWRP it fails iv'e try stock ATT, Jedi Rom, MeanBean Rom. now i tryed to flash stock firmware through J Odin but it always say corrupt pit file...Someone Please Help MEE

kumar_420 said:
I have a Att note 2 i flash the mj9 firmware using mobile odin first. Then i formatted storage, data, system, and cache. And now its says i have NO ios Installed with is true but when i try flashing another rom in TWRP it fails iv'e try stock ATT, Jedi Rom, MeanBean Rom. now i tryed to flash stock firmware through J Odin but it always say corrupt pit file...Someone Please Help MEE
Click to expand...
Click to collapse
Err mj9 is verizon haha
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged

can not upgrade to the new boot loader for 4.4?

The Odin said tz.img nand write failure!
I still can use the n5110, but without the bootloader, can I use the new rom?

No. TZ stands for "Trust Zone". Explain to us the steps you took to flash. Also, which bootloader package are you trying to flash?

MrHyde03 said:
No. TZ stands for "Trust Zone". Explain to us the steps you took to flash. Also, which bootloader package are you trying to flash?
Click to expand...
Click to collapse
I am having the same problem. The steps are
1) I download everything from this page http://forum.xda-developers.com/showthread.php?t=2759863
2) then I put my note on download mode.
3) In PDA or AP I put bootloader file
4) then I press start, re-partition disable, but I failed and cannot flash bootloader
I tried all Odin, 3.0.4, 3.0.7, 3.0.9 and all giving the same error. And when I try to flash UK kitkat stock firmware, it fails giving NAND start up and then fail, I tried several times but I don't know what to do. I am running civz 4.2.2 rom right now and I want to update to kitkat

Try this: As always, do at your own risk.
Download: n5110_xxdne1-firmware.tar.md5
Download: odin304.zip
Start ODIN as administrator (right click, Run As Administrator) *recommended
Reboot into download mode and plug in the note 8
Make sure Re-Partition is NOT CHECKED, select PDA and select the n5110_xxdne1-firmware.tar.md5
Press start and wait a few moments. It's pretty quick. Afterwards, your device will automatically reboot.

How to Root Your Samsung Galaxy A10 + Install Twrp

READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!

i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?

Oh. Alright thanks for telling me.

Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.

Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:

cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?

cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.

Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.

Can you upload it to Mediafire? Mega marks a "temporal error"...

Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?

Works on a105m?

Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes

i receive message that i running samsumg not official firmware after odin install recovery.tar

not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)

andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.

BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message

have you fixed the storage reduced to 16gb problem?

I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?

Phone Stuck on Dowloading (Do not turn off target)

Hi,
Phone; SM-AF520F
My phone has been restarting on its own from the past month and I ignored it. It showed me occasionally Google services failed or system UI is not responding.
I factory resetted the phone as any noob would do and the restart occurrence went to only at night, which I was unbothered with. A little time passed and the phone went to the downloading sky blue screen.
I'm aware with flashing roms and stuff but I never really tried it. I tried everything;
i) Used Odin, three different versions
ii) Used Stock firmware, three different versions
iii) Used Smart switch
The phone only went in download phase and than in the phase where you press home button, volume and power and it shows fonts in the left hand corner. Odin always giving me errors, sometimes stucking on setting up connection.
Two errors:
i) There is no PIT partition
ii) Write operation failed
There are always these things happening.
When I restarted with volume down and power key, the system showed, there was an error and try smart switch, updated my drivers but when I go in the settings to emergency recover my phone, it does not show my phone.
After restarting the phone couple of time, Im in downloading mode again, in between the screen also turns full sky blue with no text.
I tried installing custom recovery but the image didn't load, ( I dont know what i am doing at this point, even if this was a good idea).
I have scavanged every forum, every post, everything on the internet but I just can't seem to fix it, I tried every possible thing and it just dosent work. I know it can be fixed but I don't know how. I know I'm doing something stupidly wrong but I can't seem to figure it out.
This is an old phone, I'm going to buy another one soon but I just hope it works for another week? Can I wipe the whole system and start from scratch (Which i dont know how to do).
Any type of help would be greatly appreciated, or just tell me to give up hope on it so I can just throw it away and move on.

1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!

matkali said:
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
Click to expand...
Click to collapse
Thank you for your response.
I did what you exactly said, previously it failed at the instant, now it moved one tab and than failed.
I tried the provided Odin, than tried two roms with, with the pit filed extracted and enabled re partition.
The error occurred: Complete(write) operation failed.
The error occurred every time I tried to flash, it never worked.
Do you think there is anything else to do?

Try this way to go download mode:
Press vol-down + power until phone restart
Then instantly press vol-up + Home + Power to going to download mode!
If it not works for you! You can use (eMMC programmer or easy JTAG) to writing rom on your phone memory (Last Option)!

I gave up on it and asked for professional help. Idk what he did, but he fixed the phone. It was sluggish at first but it works like a charm now.
It took 7 minutes to turn it on, than It said, there was an authorized user who tried to access your phone, use your previous email password to access your phone. I put it on my previous details and the works okay after some updates.
I wonder what he did? And i never knew android has a feature where if somone tries to reset your phone, google account locks it? Wow.
Is flashing a custom os a good idea? I'm afraid I'll brick it or something or just keep running one ui and wait for it to die again.
Thank you for your help btw, made me learn alot.

matkali said:
1-Install 7zip application in windows
Then using 7zip, try to open file (in stock ROM files) -⇾ "CSC_ODD_***"
2-There is your phone pit file for a520f.
Extract that file and keep it between your stock Rom files.
3-Download the Odin from this link and open it:
https://dl2018.sammobile.com/Odin3-v3.14.4.zip
4-Go to download mode (blue screen) in your phone!
Add 4 part of your ROM to Odin.
Then in pit tab of Odin add your phone pit file!
5-In option tab of Odin toggle Re-Partition option.
6-click on start and wait until it shows a green icon and phone restarting!
It must be fixed!
Click to expand...
Click to collapse
im having the exact same problem this guy has, installing a pit file will erase my data? if i use HOME_CSC will the pictures stay? i only care about the photos.