Big problem, can't flash anyfirmware Wont boot - Galaxy S I9000 Android Development

Hi, I flashed JPC earlier today but was having alot of problems so I decided to go back to Modaco's JP3 Firmware.
After flashing the phone keeps booting into recovery trying to update media but says:
E: Can't mount /dev/block/mmblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
What should i do?
Edit, I can access the phone via ADB

Bump The message you have entered is too short. Please lengthen your message to at least 10 characters.

Anyone have any ideas, I've tryed just about everything I can

I had that same issue. I resolved it by ticking the re partition option in Odin and that allowed me to flash back to JM1...

I've tryed that with a bunch of diffrent firmwares and non of the seem to be restoring the phone.
Ill give JM1 a try though

Flashed with I9000DTJG4 and it fixed it. Gonna try to go back to Modaco's JM3 rom, that was the lates one that worked for me.

No good, now the rom's will sometimes start booting then stall or turn on and off.

You have to repartition with the 512 PIT file

Arkanius said:
You have to repartition with the 512 PIT file
Click to expand...
Click to collapse
Done that, run with only the pit. 512 file with repartition on.

Some one please help me out, I need a phone and bell wants 6-8 weeks to repair it :S

clear factory settings and clear cache from the recovery screen

I have also done that many times.
Here is what I have done and what has happend.
Flashed multiple roms, sometime it goes to splash screen and the shuts off, doesn't goto "S" screen.
Other times it goes to the "S" screen and stays there for hours doing nothing.
I've cleared everything, repartitioned, flashed alot of roms
Still I can't get it to boot.

Sorry to be your bad news teller but your phone is hosed. I had the exact same issue and there is nothing you can do to fix it.
Basically JPC either corrupted our internal sdcard or overwritten some partition . No matter which firmware or PIT file I used, I could not get it to boot on the exact same error.
Also if you search for the error message on this forum you will find that you are not alone and no one was able to fix this.
I am still waiting for my phone to get back from repair via Bell.
Do you own the galaxy s from Bell? It seems that this is the no affected model by this issue.

Yes it's from bell, and I'm 2 days off the exchange date lol.
I can't be without a phone for long so I need to do something about it.
I was gonna buy a new one and switch the phones and return the broken one but it seems live all of ontario is on back order :S

I suggest you go and get it replaced. There is no known fix for this, sadly.

Will do, just gotta wait for stores to get them instock.
Is there a thread for this that I could join?

so is ur phone the Galaxy S I9000 ???

ya the bell one

i though there was a difference between the canadian version and the international (european/asia) version???
isnt the bell the vibrant in the US?

nandihno said:
i though there was a difference between the canadian version and the international (european/asia) version???
isnt the bell the vibrant in the US?
Click to expand...
Click to collapse
No, it isn't. The bell vibrant is the near exact same phone as the international I9000. The only difference is the radio. The same roms work on both phones. The Bell firmware is I9000UGXXX
Sent from my GT-I9000M using XDA App

Related

[Q] Help with my broken phone please!

I bought a Galaxy S Glide (I think the same as the Blaze) from an outlet in Hong Kong on import from Canada (on boot it says "Rogers" so I can assume it's from Canada).
After using it for a week it suddenly stopped using the network and said that I need a lock code.
I went back to the shop where I bought it and they said they couldn't do anything immediately and would I like a replacement, which seemed like a nice thing to do.
However, after a couple of days I notice a glitch on the screen happen a couple of times.
I refused to believe it was a big problem (because it was my new phone right!) within a week the screen started to totally crash to the point that it would freeze in the boot up process.
You can see a picture attached of how the screen looks after I managed to do a hard reset.
When it starts to go like this, you cant do anything with it.
The guy at the shop wont change it or refund it, he claims I dropped it.
Samsung Hong Kong don't support it because it's from Canada and the only shop that knows what to do with it is the guy that sold it to me.
I'm taking the guy to the small claims court, but I'd rather have a fixed phone.
Any ideas please?
Thats happen to me, is a problem with the roger version. Everything in internet say the problem is hardware, but now mines works perfect. So, is like a bug in the rogers, maybe hardware problem, but if can be fixed with software i dont think so.
If you flash ICS with superoneclick (will remove rogers bootscreen) the problem will be fixed, of course you can flash it with a tar image with odine and will have the rogers bootscreen too. With that the phone will work again.
links
lorddavid said:
........... problem with the roger version. Everything in internet say the problem is hardware, but ..............
Click to expand...
Click to collapse
I have searched for more information about this problem, but couldn't find anything, do you have any links to anything?
Thanks again for your help.
they dont say exactly, but if you see users with similar problem, they have rogers version, at least all the user that i see with this problem.
Just do what i say, install ICS; and the problem will solve.
Follow this http://www.theandroidsoul.com/andro...ich-update-for-att-captivate-glide-i927uclg9/ for installing the one click.
Sent from my SGH-I927 using xda app-developers app
lorddavid said:
Thats happen to me, is a problem with the roger version. Everything in internet say the problem is hardware, but now mines works perfect. So, is like a bug in the rogers, maybe hardware problem, but if can be fixed with software i dont think so.
If you flash ICS with superoneclick (will remove rogers bootscreen) the problem will be fixed, of course you can flash it with a tar image with odine and will have the rogers bootscreen too. With that the phone will work again.
Click to expand...
Click to collapse
I strongly doubt this, that looks and sounds like a hardware fault. But hey, if there's no warranty option, you've got nothing to lose...
-E- FWIW, I would boot it into download mode, and let it sit on that screen for an hour. Then plug it into your computer and make sure Odin sees it. If it hangs while in download mode DO NOT FLASH ANYTHING. You REALLY don't want your phone to hang mid-bootloader-flashing, that's an automatic fullbrick...
roothorick said:
I strongly doubt this, that looks and sounds like a hardware fault. But hey, if there's no warranty option, you've got nothing to lose...
-E- FWIW, I would boot it into download mode, and let it sit on that screen for an hour. Then plug it into your computer and make sure Odin sees it. If it hangs while in download mode DO NOT FLASH ANYTHING. You REALLY don't want your phone to hang mid-bootloader-flashing, that's an automatic fullbrick...
Click to expand...
Click to collapse
That was all say, but, in odin my glide never freeze, only freeze while booting or charging too. But not in odin. And right now is working without any screen freeze.
lorddavid said:
users with similar problem, they have rogers version, at least all the user that i see with this problem.
Click to expand...
Click to collapse
So you have seen others with this problem? Where have you have seen these?
lorddavid said:
Just do what i say, install ICS; and the problem will solve.
Click to expand...
Click to collapse
Can this be rolled back ?
hkcharlie said:
So you have seen others with this problem? Where have you have seen these?
Can this be rolled back ?
Click to expand...
Click to collapse
If the device is no more under warranty, I would say trying this would not harm the device anymore. Also this is a samsung released update so nothing unofficial about it.
Sent from my SGH-I927 using xda app-developers app
if you search in internet about freeze problem in glide you will see. Can be roll back with odin. But, if you have no warranty on your device, you dont have nothing to lose, and much to win if the problem solve
My brother had this same problem on his glide (bought at newegg). I got him to install galaxym unlock (galaxsim? Something like that), and you purchase an inapp unlock for $3, and it runs, reboots your phone and you regain unlock. They claim its permanent. So far my brother didnt get locked again.
Is cheap, fast and you can also see in the reviews that there are more glides that used it and worked.
Hope this helps!
Sent from my SGH-I927 using Tapatalk 2
luquiyahni said:
My brother had this same problem on his glide (bought at newegg). I got him to install galaxym unlock (galaxsim? Something like that), and you purchase an inapp unlock for $3, and it runs, reboots your phone and you regain unlock. They claim its permanent. So far my brother didnt get locked again.
Click to expand...
Click to collapse
This helped with the frozen screen as shown in the picture?
thats for unlock, is possible that your phone will lock again when update to ICS. my phone was too from newegg and is rogers, thats why i say is a problem with rogers version.
Do what i tell you, you have nothing to lose
lorddavid said:
thats for unlock, is possible that your phone will lock again when update to ICS. my phone was too from newegg and is rogers, thats why i say is a problem with rogers version.
Do what i tell you, you have nothing to lose
Click to expand...
Click to collapse
Thanks for thinking about my problem, but this solution misses one very big point, the phone that was locked was changed for the phone that has a screen that doesn't work.
I do not have the locked phone any more.
probably will lock again after you flash ICS via odin, thats happen to me. Is not a screen problem, again, if you want to try to solve, do what i say before.
I have the exact same problem, was just about to post in the other thread about this: http://forum.xda-developers.com/showthread.php?t=1953672
Bought my phone from Amazon US marketplace about a month ago (but live in the UK), and suddenly the phone did that on start up one day. However, I agree with lorddavid, it is not a hardware fault as it does not freeze in download mode. Samsung service centres won't repair as it does not have a UK warranty, and although I can get a refund by returning I would rather have a working phone.
lorddavid said:
If you flash ICS with superoneclick (will remove rogers bootscreen) the problem will be fixed, of course you can flash it with a tar image with odine and will have the rogers bootscreen too. With that the phone will work again.
Click to expand...
Click to collapse
Was very happy to read this, seems like I'll have to try it. Have been putting it off as it will wipe my phone which I did not want to do just yet - I have a lot of photos and clips which I can't exactly back up as it does not boot normally. Really annoying. Any way to access these/back up before flashing?
And another question, that ICS update is the first leaked one which carried a few bugs (as did the official UCLH2 one) - can I install the fixed UCLJ3 straight away? And do I need a rooted phone in the first place? In Rawr0w0's initial post it seems to suggest I do. Sorry for all the questions, and thanks in advance.
dont remember, i think is the UCLH2, and i think that there was a odin flashable of the latest version (with bug fixes), you can try that (but dont know where download it :/ )
Do you have the photos in your internal storage? i think if you flash with one click, it will delete it, but if you flash the firmware via odin, it doesnt delete it (but i am not 100% sure)
And no, you dont need root to install roms via odin
This is UCLH2 without one click
http://androidromupdate.com/2012/09...-firmware-upgrade-official-kiesota-stock-rom/
And here is the latest version with bug fixes (like keyboard light)
http://androidromupdate.com/2012/11/10/i927uclj3-new-ics-4-0-4-for-samsung-sgh-i927-captivate-glide/
These are the officials. But the second link i never try it to flash because when i has the problem there wasnt that version
Thanks, yeah that's where I was getting the files from, I'll try it tonight, will probably go for the second link, the UCLJ3 rom.
lorddavid said:
And here is the latest version with bug fixes (like keyboard light)
These are the officials. But the second link i never try it to flash because when i has the problem there wasnt that version
Click to expand...
Click to collapse
YES WAHOO!! My phone works! Thank you for the advice! I mainly got it from the other thread but without having read your attempt at flashing I would never have tried it - I'm so happy! I managed to make a back up and copy my media via CWM anyway, but everything was still on there including all my texts and whatsapp messages, and now I have ICM 4.04 too!
Phew I thought I would have to send it back, get a refund and order another one which is a massive pain and lose everything on my phone.
Hkcharlie, you need to try this!
lyricalwax said:
YES WAHOO!! My phone works! Thank you for the advice! I mainly got it from the other thread but without having read your attempt at flashing I would never have tried it - I'm so happy! I managed to make a back up and copy my media via CWM anyway, but everything was still on there including all my texts and whatsapp messages, and now I have ICM 4.04 too!
Phew I thought I would have to send it back, get a refund and order another one which is a massive pain and lose everything on my phone.
Hkcharlie, you need to try this!
Click to expand...
Click to collapse
thats cool Enjoy the phone, is a great phone

[Q] CM 10.1 and no PIT File

I am running CM 10.1 nightly on international n7105, today my camera app stopped working and on rebooting the phone, it continously went into download mode loop, however I could get into recovery, but when trying to flash Philz Recovery image, I got "No Pit Partition" error.
Thanks to Dr Ketan's pit file i was able to restore the phone via odin.
Question: I ran emmc check and see it passed memory test as well as chip test (sane chip/memory), what could be the reason for losing the pit partition? and how can i avoid it in future (i am travelling soon and do not want to carry another phone, i want to understand the possible reason, any logs etc that i can look?)
Check out this post http://forum.xda-developers.com/showthread.php?p=37012900
Basically if you have the 0xf1 value your screwed. You can try some specific kernels or let the phone die on you and get it repaired by samsung. My note fried on me within 24 hours. I was traveling too and had to buy another phone. The repairs were done pretty fast though and I now have a replaced mobo withouth the troubled emmc.
nitropower said:
I am running CM 10.1 nightly on international n7105, today my camera app stopped working and on rebooting the phone, it continously went into download mode loop, however I could get into recovery, but when trying to flash Philz Recovery image, I got "No Pit Partition" error.
Thanks to Dr Ketan's pit file i was able to restore the phone via odin.
Question: I ran emmc check and see it passed memory test as well as chip test (sane chip/memory), what could be the reason for losing the pit partition? and how can i avoid it in future (i am travelling soon and do not want to carry another phone, i want to understand the possible reason, any logs etc that i can look?)
Click to expand...
Click to collapse
well glad it says 0xf7 on mine. so what could it be, is it yet another bug?
nitropower said:
I am running CM 10.1 nightly on international n7105, today my camera app stopped working and on rebooting the phone, it continously went into download mode loop, however I could get into recovery, but when trying to flash Philz Recovery image, I got "No Pit Partition" error.
Thanks to Dr Ketan's pit file i was able to restore the phone via odin.
Question: I ran emmc check and see it passed memory test as well as chip test (sane chip/memory), what could be the reason for losing the pit partition? and how can i avoid it in future (i am travelling soon and do not want to carry another phone, i want to understand the possible reason, any logs etc that i can look?)
Click to expand...
Click to collapse
I think it would be some bad flashing, once you recover it, i don't find any serious issue.
Just forget it.
xzces said:
Check out this post http://forum.xda-developers.com/showthread.php?p=37012900
Basically if you have the 0xf1 value your screwed. You can try some specific kernels or let the phone die on you and get it repaired by samsung. My note fried on me within 24 hours. I was traveling too and had to buy another phone. The repairs were done pretty fast though and I now have a replaced mobo withouth the troubled emmc.
Click to expand...
Click to collapse
Not all the pit error are SDS
He had already recover device with pit, so no question of SDS.
as well later msg also suggest he has non affected chip.
dr.ketan said:
I think it would be some bad flashing, once you recover it, i don't find any serious issue.
Click to expand...
Click to collapse
The nightly was working ok for two days now, I didn't see anything funny with it, then all of a sudden this; is it possible that flashing was half well done i.e. until the broken flash pages were accessed the issue didn't pop up?

[Q] No Imei and "baseband unknown" Please help! Really weird!

So, this is a long process I've been through-- First thanks so much for just taking the time to read this and any input would be awesome
I tried to flash a new slimkat 4.4.2 rom today and it flashed fine came up had service all was well except I think i did it as a "dirty" flash. I don't want to think any errors possible would be from that so i immediately did a "clean" flash and wiped everything except external sd-card in TWRP
Rebooted and noticed i didn't have any signal or data. First thought was modem so I started flashing MJ4 and reboot, nothing, so I flashed MK6 and reboot, nothing, so i changed to CWM recovery and flashed them, nothing, then at this point i just want a phone back doesn't even matter so i always seem to have several ROMS on my phone so i flashed another Sky Note 4.3 and reloaded nothing... So i started really wondering now and looking at my baseband to see what it said and noticed "Unkown Baseband" and Imei "unkown" (All while at work) So I came home did a little research while trying various other roms and none worked. So I read one way is to use Kies and do a "firmware upgrade initialisation"
Now it rebooting and completed going back to 4.1.2 CAMA4 and i still have nothing.. So I flashed UCALJ modem (Which should work as well) and I still have no data or signal because of unknown IMEI and Baseband. I don't really care about using triangle away or not, but i can get around and flash roms and everything thats what I don't understand.
Oh I did use CF-autoroot to install TWRP to install the modem as a .zip
Any ideas I would love you forever!!!
Bradbetheman said:
So, this is a long process I've been through-- First thanks so much for just taking the time to read this and any input would be awesome
I tried to flash a new slimkat 4.4.2 rom today and it flashed fine came up had service all was well except I think i did it as a "dirty" flash. I don't want to think any errors possible would be from that so i immediately did a "clean" flash and wiped everything except external sd-card in TWRP
Rebooted and noticed i didn't have any signal or data. First thought was modem so I started flashing MJ4 and reboot, nothing, so I flashed MK6 and reboot, nothing, so i changed to CWM recovery and flashed them, nothing, then at this point i just want a phone back doesn't even matter so i always seem to have several ROMS on my phone so i flashed another Sky Note 4.3 and reloaded nothing... So i started really wondering now and looking at my baseband to see what it said and noticed "Unkown Baseband" and Imei "unkown" (All while at work) So I came home did a little research while trying various other roms and none worked. So I read one way is to use Kies and do a "firmware upgrade initialisation"
Now it rebooting and completed going back to 4.1.2 CAMA4 and i still have nothing.. So I flashed UCALJ modem (Which should work as well) and I still have no data or signal because of unknown IMEI and Baseband. I don't really care about using triangle away or not, but i can get around and flash roms and everything thats what I don't understand.
Oh I did use CF-autoroot to install TWRP to install the modem as a .zip
Any ideas I would love you forever!!!
Click to expand...
Click to collapse
I gots more love than I know what to do with.....
Do you have a backup of your /efs? Hopefully when (if) you did a backup in TWRP you choose to back up efs also ..... ???
dicksteele said:
I gots more love than I know what to do with.....
Do you have a backup of your /efs? Hopefully when (if) you did a backup in TWRP you choose to back up efs also ..... ???
Click to expand...
Click to collapse
Lesson learned... no backup
I'm going to try and repair (backup and re-put) my EFS folder there, but how do i tell if its a complete EFS folder or if it is damaged? On the note 2 ATT is there a way to manually put in your IMEI? or reasons why this couldn't be my problem please
Bradbetheman said:
I'm going to try and repair (backup and re-put) my EFS folder there, but how do i tell if its a complete EFS folder or if it is damaged? On the note 2 ATT is there a way to manually put in your IMEI? or reasons why this couldn't be my problem please
Click to expand...
Click to collapse
Last time this happened to me, a very long night, I had a guru on hangouts with me and we tried everything we could think of..
Only thing that got me back was a restore of an old backup, as a wild ass last resort.... Lost my mind when it worked
This problem is not weird, unfortunately it's common.
Starting surfing for your error and read read read.... I've had a long fricking day ..
Like a maniac I'm trying to port over a 7100 ROM.. I get that error also.
Only thing that gets it back is restoring a backup rom that had an efs backup in it.
dicksteele said:
Last time this happened to me, a very long night, I had a guru on hangouts with me and we tried everything we could think of..
Only thing that got me back was a restore of an old backup, as a wild ass last resort.... Lost my mind when it worked
This problem is not weird, unfortunately it's common.
Starting surfing for your error and read read read.... I've had a long fricking day ..
Like a maniac I'm trying to port over a 7100 ROM.. I get that error also.
Only thing that gets it back is restoring a backup rom that had an efs backup in it.
Click to expand...
Click to collapse
In my EFS folder i can't find any .nv_**** files so I'm assuming they are gone and I don't have a back-up. I've been reading and reading with nothing coming out of it other then how to fix it on alot of other samsung phones. I can't seem to find a way to re-build and manually enter my own IMEI (because i know the IMEI) Driving me nuts!! but thanks for your reply
EFS folder anyone?
Any chance i can get a copy of someones EFS folder so that i can edit the .nv_data and add my IMIE? Please of a ATT Note 2
Thanks so much and just PM link
Bradbetheman said:
Any chance i can get a copy of someones EFS folder so that i can edit the .nv_data and add my IMIE? Please of a ATT Note 2
Thanks so much and just PM link
Click to expand...
Click to collapse
Sadly no...
It is both illegal...and unethical for someone to give you a copy of an EFS folder...
It contains the user data and carrier information for the device...making the folder private...and unique to it's owner ....g
Sent from my SGH-I317 using XDA Premium 4 mobile app
Have you tried restoring firmware from Kies or flashing official firmware via Odin?
Sent from my GT-I9505G using Tapatalk
nikzDHD said:
Have you tried restoring firmware from Kies or flashing official firmware via Odin?
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
I have done official firmware and over odin and before that Kies recovery. Also, knew it wasn't smart but didn't know it was illegal.
Any idea's for programs that will scan for deleted folders? or other ways to re-build EFS or .nvdata?
Bradbetheman said:
I have done official firmware and over odin and before that Kies recovery. Also, knew it wasn't smart but didn't know it was illegal.
Any idea's for programs that will scan for deleted folders? or other ways to re-build EFS or .nvdata?
Click to expand...
Click to collapse
I was going to try this but didn't have to because I found a backup with my efs. I was going to try putting a new sim in and see if phone would see it and rebuild.
Actually was going to pull the sim out of my wife's note 2 and try it.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
So I tried from my wifes sim today with no avail. Still don't have my phone and wondering if there is any way to recover it? Do i try to set it back to stock everything fix the flash counter then call samsung? I don't think its under warranty anymore since i've had it for almost 2 years. I know its a long shot but I wonder if taking it to one of those "cell phone repair" places would be any help? I'm out of options and actually had to drop back to my old HTC Inspire
Bradbetheman said:
So I tried from my wifes sim today with no avail. Still don't have my phone and wondering if there is any way to recover it? Do i try to set it back to stock everything fix the flash counter then call samsung? I don't think its under warranty anymore since i've had it for almost 2 years. I know its a long shot but I wonder if taking it to one of those "cell phone repair" places would be any help? I'm out of options and actually had to drop back to my old HTC Inspire
Click to expand...
Click to collapse
Yea, the sim deal was to simple to work...
So never heard I don't think. What were you on before you flashed slimkat? Did you do the 4.3 OTA update?
Have you tried flashing an original rom with the Pit file? That's your last resort, EFS is unique to each phone by using someone's else's this is illegal as your modifying the IMEI. I've had efs issues in the past but always had a backup to hand. Try flashing everything with a pit file if that doesn't work then you will have to take it in for repair, Samsung official could do it but don't know what they will charge as it's out of warranty or maybe a local phone repair shop could do it or someone with jtag services can do it perhaps too.
Sent from my GT-I9505G using Tapatalk
nikzDHD said:
Have you tried flashing an original rom with the Pit file? That's your last resort, EFS is unique to each phone by using someone's else's this is illegal as your modifying the IMEI. I've had efs issues in the past but always had a backup to hand. Try flashing everything with a pit file if that doesn't work then you will have to take it in for repair, Samsung official could do it but don't know what they will charge as it's out of warranty or maybe a local phone repair shop could do it or someone with jtag services can do it perhaps too.
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
I was on another 4.4 rom before I went to slimkat
What is a pit file? I don't know much about it and is there a "trusted" guide on how to use one with the Note 2? I mean I'm familiar with Odin so I know its there but I've never had to use one
Bradbetheman said:
I was on another 4.4 rom before I went to slimkat
What is a pit file? I don't know much about it and is there a "trusted" guide on how to use one with the Note 2? I mean I'm familiar with Odin so I know its there but I've never had to use one
Click to expand...
Click to collapse
Here's the info...
http://forum.xda-developers.com/showthread.php?t=2609871
A couple of other people are having worse problems like not being able to flash a recovery in ODIN or a ROM saying it can't read partitions. That's a good choice for a PIT flash.
But I'm reading and reading and everything is saying, yep that will work.... IF you then have the efs backup to restore
dicksteele said:
Here's the info...
http://forum.xda-developers.com/showthread.php?t=2609871
A couple of other people are having worse problems like not being able to flash a recovery in ODIN or a ROM saying it can't read partitions. That's a good choice for a PIT flash.
But I'm reading and reading and everything is saying, yep that will work.... IF you then have the efs backup to restore
Click to expand...
Click to collapse
Thanks so much for the help!! I'm just worried that its not going to fix it and only make it worse possibly. I can't find how to pull my PIT file to analyze it so my next option is... Call a professional tomorrow... I'm going to call because apparently a "Z3X box" will fix my phone in like 3 minutes. I will post back though letting people know in the future whether they can or not. Because of legal reasons I don't know if they can even write my own IMEI back to the device. Will post back though regardless after tomorrow when I call them.
This happened to me a while back and I just flashed back to stock using Odin and all was fine
Sent from my GT-N7105 using Tapatalk
GREAT NEWS!
So I got desperate and realized this was going to take a professional. I called around to my local "cell phone repair" shops that really only know how to change the screen and asked about recovering the EFS file. It started out: "Hi can I talk with someone knowledgeable about the Android file system?" and every time the person said they were an "expert" So I said "I deleted or corrupted my EFS file and I need a repair for it" and EVERY time they told me they had no clue what I was talking about. I read and read everything I could find on the internet and most pointed me to some international "send you phone here" and of course I'm very skeptical of shipping my phone just about anywhere. So I found a person in the US at mobiletechvideos.com and looked him up with the BBB and found reviews from multiple sources.
I can say mobiletechvideos.com is legit and awesome! Josh fixed my phone and repaired the IMEI in less the 10 minutes remotely. I have my note 2 back! Please do not hesitate to give this guy a try he is legit and really down to earth guy. This thread can end here because whatever he did I have no clue but it worked!
Also a lot cheaper then I though it was going to be
Bradbetheman said:
GREAT NEWS!
So I got desperate and realized this was going to take a professional. I called around to my local "cell phone repair" shops that really only know how to change the screen and asked about recovering the EFS file. It started out: "Hi can I talk with someone knowledgeable about the Android file system?" and every time the person said they were an "expert" So I said "I deleted or corrupted my EFS file and I need a repair for it" and EVERY time they told me they had no clue what I was talking about. I read and read everything I could find on the internet and most pointed me to some international "send you phone here" and of course I'm very skeptical of shipping my phone just about anywhere. So I found a person in the US at mobiletechvideos.com and looked him up with the BBB and found reviews from multiple sources.
I can say mobiletechvideos.com is legit and awesome! Josh fixed my phone and repaired the IMEI in less the 10 minutes remotely. I have my note 2 back! Please do not hesitate to give this guy a try he is legit and really down to earth guy. This thread can end here because whatever he did I have no clue but it worked!
Also a lot cheaper then I though it was going to be
Click to expand...
Click to collapse
That is great news. Congrats ! How in the world did he do it remotely ?????

[Q] Am I being SCAMMED with this M919 purchase?

Hi:
I bought a Galaxy S4, SGH-M919 (Supposingly from T-mobile?).
When I unboxed it and power on, it appears to have a 4.2.2 ROM (M919 XXUAMC6) from another region (Great Britain or something?).
I can't flash any T-Mobile stock firmware (>=4.3) back into the phone with Odin (always showing failed security check: sbl2 ....).
Also the custom rom install counter is 10 ...
The seller was selling this phone as brand new, also it came with all original packaging.
Just wondering how is that possible?
Am I being scammed?
:cyclops:
Thanks!
Maybe. Or maybe they shipped the wrong phone.. Get Samsung phone info from playstore and check what bootloader it has
serio22 said:
Maybe. Or maybe they shipped the wrong phone.. Get Samsung phone info from playstore and check what bootloader it has
Click to expand...
Click to collapse
Thanks for the reply.
But I believe my phone is soft bricked when I valiantly(blindly) flashed a wrong ROM into my phone.
Now I just want to get my original firmware back.
However it appears that I'm the only one with M919XXUAMC6 rom on the internet.
Is this real life, lol.
guruqu said:
Thanks for the reply.
But I believe my phone is soft bricked when I valiantly(blindly) flashed a wrong ROM into my phone.
Now I just want to get my original firmware back.
However it appears that I'm the only one with M919XXUAMC6 rom on the internet.
Is this real life, lol.
Click to expand...
Click to collapse
You shouldn't have tried to mess with it.. Anytime you see something abnormal in a purchase you should investigate and contact seller but ok, what did you flash and did you factory reset?
I followed an instruction and did a full wipe on my device, data and cache. And I realized Odin can't flash in the room. That's when I got stuck. But I can still boot into cwm and download mode though.
Under the battery, what does it have for a model number there?
Model: SGH-M919
FCC: A3LSGHM919
Post your bootloader. There has been a wave of franken S3's lately with parts from different S3's claiming to be another S3 model. Hopefully that is not the case with your device
Wait, but mine is M919 which should be a S4 right?
Also since I'm semi-bricked already, how do I get bootloader information?
I could try to mount boot block in TWRP and pull up something?
Any suggestion on how to do this?
Try to flash CM, the one for jflte, since its universal it may get you booted
Edit: also don't forget to factory reset
No good. Tried cm-11-20140804-SNAPSHOT-M9-jflte.zip .
When I install the file, it gave me
set_metadata_recursive: some changes failed
E: Error executing updater binary in zip '/xxx/xxx'
Error flashing zip 'xxx/xxx'
Click to expand...
Click to collapse
Try downloading again
Tried the same Rom, redownloaded, same message.
I also tried using this Rom from this thread (Stock Deodexed + Rooted ROM (v1.3))
http://forum.xda-developers.com/showthread.php?t=2679913
Installing the Rom from TWRP appeared to be successful, however, when I try to restart TWRP still shows me "There's no OS installed".
And the boot hangs on Samsung Logo.
Are you using latest twrp? If so try CWM and latest cm nightly
I'm using TWRP and CWM provided here
http://galaxys4root.com/clockworkmodtwrp-recoveries/
But nope, it is still the same thing.
Symlink: some symlinks failed.
Installation Abort
Click to expand...
Click to collapse
Is there a way to see the actual installation log? At least i can know which symbolic link is down.
Also whenever I tried to flash using Odin something other than recovery, it gives me "Secure Check Fail: xxx".
Is this because of the boot loader is locking down custom rom?
Those are really old recoveries.. Download twrp from their official site, flash, and try cm again
OMGOMG, it appears it is indeed an outdated recovery.
Gotta love you serio22.
So it works now?
Yup. I still think this is a factory refurbished device though. There is no way to explain custom bin counter was 9 and on custom bin out of the box though. It is really impressive how they come with all the boxes plastic seals etc. Definitely the most well disguised used device I've ever seen.
Don't know, still seems odd to me I've never heard of MC6 firmware

Having trouble with the service.

My problem started some months ago, when a friend tried to root my phone, he told me that he rooted it but every app that checks for root told me that it wasn't rooted and i couldn't use apps that needed root also, the downside to all this is that i couldn't use apps that do not allow root, like the banking app, or Pokemon Go, but i used the phone like that for some months until last week when i decided to try and fix it. I thought that if i flash a stock firmware everything should be fine and the phone should be as new. On the phone, it says that the model is SM-N910F(behind the battery), in the settings it also said SM-N910F, so i tried flashing a rom for this model at first and it kept failing with me not knowing why. After trying different thing and googleing some time, i finally noticed that in "Fast Download", it says that the phone's model is SM-N910P, so i started searching about this, i didn;t understand why there were 2 different models on my phone, then i found out about searching my IMEI on imei.info, so i tried it and here it was SM-N910C, i had no idea what all this meant, but at this time i already got stuck into bootloop. Eventually, i found this thread: https://forum.xda-developers.com/note-4/help/help-sm-n910f-sm-n910p-bootloader-t3299285 and did what cam_bob22 said, it worked, i finally flashed the firmware on my phone and it worked, i could use the bank app, pokemon go, everything was fine except the fact that i couldn't select or change my mobile operator, when going to mobile networks, the mobile operators options was greyed out and couldn't be pressed(i want to mention that i did have service and that data worked but the internet would work only in roaming and i couldn't get 4G). So i tried updating the software from 5.1.1 to 6.0.1 like it was said in the instructions and hopping that this update would fix the issue, but unfortunately for me after the update i somehow lost service completely, the signal sign was in the shape of a triangle with no bars, and the mobile operators setting was exactly as before.
So far i tried going back to 5.1.1 but besides the Hands Free activation that i can't make to go away, i still can't use the mobile operators setting and my data only works with roaming activated and doesn't get 4g. One thing that i forgot to mention is that the IMEI with the 5.1.1 firmware was of a samasung Galaxy S5 not a note 4, i checked it on imei.info.
I was wondering if there is any way for me to go back to the OS i had before my friend tried to root my phone, when it said in the settings that it was SM-N910F and everything worked as it should have.
Thank you for reading and i really hope someone can help me.
@robert11arad
There is no way to go back unless he made a backup. Which is why you should always do this before you flash anything.
I'm not sure if this will help but you could try flashing a international custom Rom after you have correct firmware. But if your phone is a Sprint version, you'll have to use a special data fix and kernel.
What firmware did you end up using to flash? Was it Sprint? If so, and you use gsm service, try flashing my Gsm stock Rom for Sprint phones. It's in post 2.
https://forum.xda-developers.com/no...t/05-15-17-debloated-deodexed-rooted-t3607029
You'll first need to be on current marshmallow firmware. So flash firmware with Odin first, then install Twrp with Odin. Then install Rom with Twrp.
aaron74 said:
@robert11arad
There is no way to go back unless he made a backup. Which is why you should always do this before you flash anything.
I'm not sure if this will help but you could try flashing a international custom Rom after you have correct firmware. But if your phone is a Sprint version, you'll have to use a special data fix and kernel.
What firmware did you end up using to flash? Was it Sprint? If so, and you use gsm service, try flashing my Gsm stock Rom for Sprint phones. It's in post 2.
https://forum.xda-developers.com/no...t/05-15-17-debloated-deodexed-rooted-t3607029
You'll first need to be on current marshmallow firmware. So flash firmware with Odin first, then install Twrp with Odin. Then install Rom with Twrp.
Click to expand...
Click to collapse
Thank you for the reply, i wanted to say that with the Sprint firmware i used, after doing all the updates it unlocked the mobile operators option, but it couldn't find any.
robert11arad said:
Thank you for the reply, i wanted to say that with the Sprint firmware i used, after doing all the updates it unlocked the mobile operators option, but it couldn't find any.
Click to expand...
Click to collapse
Oh ok. So do you have service?
aaron74 said:
Oh ok. So do you have service?
Click to expand...
Click to collapse
No, the network operators is unlocked but there's still no service, when i try scanning for an operator it just stops with no message, and nothing happens.
I forgot to mention this, but before all this happened, I made a back-up of the phone with smart switch, is it possible to get back to how it was using that? And another thing is that when using the backup, it only restores music and photos, no contacts, no apps.(From what i've noticed so far)
robert11arad said:
No, the network operators is unlocked but there's still no service, when i try scanning for an operator it just stops with no message, and nothing happens.
I forgot to mention this, but before all this happened, I made a back-up of the phone with smart switch, is it possible to get back to how it was using that? And another thing is that when using the backup, it only restores music and photos, no contacts, no apps.(From what i've noticed so far)
Click to expand...
Click to collapse
You would have needed a system backup with twrp.
What country you in? What network you on? What firmware you on?
aaron74 said:
You would have needed a system backup with twrp.
What country you in? What network you on? What firmware you on?
Click to expand...
Click to collapse
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
robert11arad said:
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
Click to expand...
Click to collapse
Ok. About the best advice i can give is, because your on pure Sprint Rom, something is messing up with csc or something.
All i can suggest, is maybe try updating to QC1 with Odin and then try flashing my gsm Rom. Which is essentially just a tmobile rom.
And if that don't give you the function you you need. Then maybe try an international Rom.
It's hard to say what the last person did to the phone.
robert11arad said:
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
Click to expand...
Click to collapse
Also. You stated your phone first showed as a 910f. So maybe flashing a international F rom, will provide the correct csc settings for your phone to work. Only problem your gonna have, is because it's Sprint hardware, you'll have to pair the Rom with a kernel that'll work and some lib files for data.
I can help you by putting together some files to flash. But the main question would be, Do you want a stock note 4 Rom?
Also before any of this happened, do you know what firmware you were on? Marshmallow? Lollipop?
aaron74 said:
Also. You stated your phone first showed as a 910f. So maybe flashing a international F rom, will provide the correct csc settings for your phone to work. Only problem your gonna have, is because it's Sprint hardware, you'll have to pair the Rom with a kernel that'll work and some lib files for data.
I can help you by putting together some files to flash. But the main question would be, Do you want a stock note 4 Rom?
Also before any of this happened, do you know what firmware you were on? Marshmallow? Lollipop?
Click to expand...
Click to collapse
I would really appreciate if you helped me put the files together cause i have no idea how any of this works, i'm new. But i wanted to ask, is there any chance for thia to brick my phone?
When it had sm-n910f on it i couldn't update it after 5.1.1, when i pressed update it wouldn't do anything.
And yes, if possible i would like it to be a stock firmware, but if it is not possible i don't mind using something else as long as it works properly.
Thank you for all your help, i don't know what i would do otherwise.
robert11arad said:
I would really appreciate if you helped me put the files together cause i have no idea how any of this works, i'm new. But i wanted to ask, is there any chance for thia to brick my phone?
When it had sm-n910f on it i couldn't update it after 5.1.1, when i pressed update it wouldn't do anything.
And yes, if possible i would like it to be a stock firmware, but if it is not possible i don't mind using something else as long as it works properly.
Thank you for all your help, i don't know what i would do otherwise.
Click to expand...
Click to collapse
Well, first, let me state,about bricking device. I have to state that it's not impossible to brick. But after hundreds of flashes never had problem. These devices are hard to brick. What hard bricks a device is messing with boot loader and partitions that shouldn't be messed with, like trying to unlock lte bands. But just flashing roms is fine unless you flash a Rom not for your phone and it over writes wrong partition.
All snap Dragon note 4s have the same layout so all you need is correct kernel, csc, and some ril lib files to get data working.
Now, mine main worry is that the phone is still unlocked,because I don't know what possible changes were made to it.
But with all that being said,I'll move on. With another post.
---------- Post added at 05:52 PM ---------- Previous post was at 05:13 PM ----------
@robert11arad
Before we go too deep into this and upgrade and stuff. I'd like to just test a custom Rom on your phone and see what works.
So what firmware are you on right now?
5.01, 5.1.1, or 6.0.1?
I'm gonna take a guess and move on. You last stated you were on OG5 which it's 5.1.1. So if that's true, let's try the following.
First I'm gonna assume you already used Odin to flash that firmware. So now we need to flash Twrp. So download this on pc https://eu.dl.twrp.me/trlte/twrp-3.1.1-0-trlte.img.tar
1 . Put phone in download mode. Open Odin and plug in phone.
2. In Odin options make sure everything is unticked except Reset Flash Counter.
3. Now click on AP and select the Twrp file.
4. Flash it. Let it flash until it states it's completed. Once done. Unplug phone. Pull out battery. Put back in and boot to recovery by holding power+home+vol.up
5. Now you should have Twrp. Just reboot phone so we can continue to next post.
PM sent
@robert11arad
Ok, here you go. If your where we left off, you should be on stock QC1 and have Twrp installed.
Just download this file, boot into recovery, and install. This file will delete dalvick/cache, so phone will take a few minutes to boot up.
I actually recommend before flashing, you do a factory reset in recovery then install.
Anyhow here you go. Let me know if it fixes what your looking for. If not, my only others option is to install a custom n910f Rom. I'll gladly walk you through if need be. But try this first.
aaron74 said:
@robert11arad
Ok, here you go. If your where we left off, you should be on stock QC1 and have Twrp installed.
Just download this file, boot into recovery, and install. This file will delete dalvick/cache, so phone will take a few minutes to boot up.
I actually recommend before flashing, you do a factory reset in recovery then install.
Anyhow here you go. Let me know if it fixes what your looking for. If not, my only others option is to install a custom n910f Rom. I'll gladly walk you through if need be. But try this first.
Click to expand...
Click to collapse
Alright so i just tried it and when starting my phone, i can't even set it up because i keep getting a message that com.android.phone has stopped. After about half an hour of trying to start it, i finally managed to get to setting and to app manager, there i looked for com.android.phone and it was nowhere to be found. Apart from this i noticed a N with some signal bars where my phone signal should've been and i didn;t get the hands free activation anymore, but that's all...
robert11arad said:
Alright so i just tried it and when starting my phone, i can't even set it up because i keep getting a message that com.android.phone has stopped. After about half an hour of trying to start it, i finally managed to get to setting and to app manager, there i looked for com.android.phone and it was nowhere to be found. Apart from this i noticed a N with some signal bars where my phone signal should've been and i didn;t get the hands free activation anymore, but that's all...
Click to expand...
Click to collapse
Ok. I must have forgot something in csc. Sorry. I'll get back with you.

Categories

Resources