Develop Bugs

Screen Has Air-Bubbles?

My T-Mobile Touch Pro 2 screen has had about 3 medium sized airbubbles for a couple days, when i bought it used, and i thought that it was just the plastic of a new phone, or a screen protector. I went to take it off today, but there doesnt seem to be any plastic or anything.
The screen seems** to be raised slightly, and when i push it down the air-bubbles will act accordingly, then when i release the screen, they will go back to their normal positions.
any ideas on this or how to fix it? it looks really tacky. Thanks!

do you have insurance? maybe try to get it replaced? i'd have never bought it like that. i'd be tempted to push a needle in to pop the bubbles, but my first move would be trying to get a replacement.

heroskyy said:
My T-Mobile Touch Pro 2 screen has had about 3 medium sized airbubbles for a couple days, when i bought it used, and i thought that it was just the plastic of a new phone, or a screen protector. I went to take it off today, but there doesnt seem to be any plastic or anything.
The screen seems** to be raised slightly, and when i push it down the air-bubbles will act accordingly, then when i release the screen, they will go back to their normal positions.
any ideas on this or how to fix it? it looks really tacky. Thanks!
Click to expand...
Click to collapse
sounds like the guy dropped it in water. Are you sure its not a zagg invisishield? They look like the basic screen protectors but are much more durable.

see, it really could be, but like, im trying to pry it off..and im not getting anything. is the whole front of the phone (the screen, and the black parts) supposed to have that plasticy-touch screen feel? because thats how it is.

heroskyy said:
see, it really could be, but like, im trying to pry it off..and im not getting anything. is the whole front of the phone (the screen, and the black parts) supposed to have that plasticy-touch screen feel? because thats how it is.
Click to expand...
Click to collapse
My touch pro 2 did come with a screen protector in the box from Htc so there is every chance it is that. Ive never seen an lcd touch screen with bubbles before, even when damaged, only in the screen protector. Is there no signs of an edge at all especially around the buttons?

cjm1979 said:
My touch pro 2 did come with a screen protector in the box from Htc so there is every chance it is that. Ive never seen an lcd touch screen with bubbles before, even when damaged, only in the screen protector. Is there no signs of an edge at all especially around the buttons?
Click to expand...
Click to collapse
yupppp, there it is. thank god lol. i can see the edge clearly by the buttons. now, if i take of the screen protector, can i put it back on so it wont have air bubbles?

No buy a new one cheap ass

kable said:
No buy a new one cheap ass
Click to expand...
Click to collapse
haha, im going to, was just wondering

heroskyy said:
haha, im going to, was just wondering
Click to expand...
Click to collapse
I bought a couple of Htc orig ones but im really **** at putting them on! Dont bother with cheap **** ones on ebay. Either Htc ones or other more expensive ones like invisible shield. That bit extra will be worth it.

Yeah I suck at putting them on too. I always end up with air bubbles, lint or hair in them or at the very least its misaligned or I had to take it off and put it back on so many times one of the edges are bent or doesn't stick. I ordered 2 mirrored ones to take the place of the stock one on there now. Wish me luck, I have 2 shots.

Go to the AT&T store. You get three for $10 and they are easy to put on.

charleswesde said:
Yeah I suck at putting them on too. I always end up with air bubbles, lint or hair in them or at the very least its misaligned or I had to take it off and put it back on so many times one of the edges are bent or doesn't stick. I ordered 2 mirrored ones to take the place of the stock one on there now. Wish me luck, I have 2 shots.
Click to expand...
Click to collapse
Sorry I couldn't find a better vid but.. point is to leave the backing on as you go..
http://www.youtube.com/watch?v=V3uVgzxpd1Y @ 2:50..
That's the trick I use and don't get any dust or bubbles..

citizenatlarge said:
Sorry I couldn't find a better vid but.. point is to leave the backing on as you go..
http://www.youtube.com/watch?v=V3uVgzxpd1Y @ 2:50..
That's the trick I use and don't get any dust or bubbles..
Click to expand...
Click to collapse
I do that, too! The problem is I'm too stupid to perfectly align the screen protector, and it goes on the edges, so I have bubbles along some of the edges.

cjm1979 said:
I bought a couple of Htc orig ones but im really **** at putting them on! Dont bother with cheap **** ones on ebay. Either Htc ones or other more expensive ones like invisible shield. That bit extra will be worth it.
Click to expand...
Click to collapse
it took me hours to put the first screen protector without air bubbles.

lg optimus 4xhd
hi i got a lg optimus 4xhd, and it has air bubbles on the screen, i can see some edges so there migth be a screen protector but those edges have always been on the phone so im not quite sure. does anyone know if it is a screen protector. ive tried to get the bubbles away but they wont go away

eplejus said:
hi i got a lg optimus 4xhd, and it has air bubbles on the screen, i can see some edges so there migth be a screen protector but those edges have always been on the phone so im not quite sure. does anyone know if it is a screen protector. ive tried to get the bubbles away but they wont go away
Click to expand...
Click to collapse
This is the HTC Touch Pro 2 forum. You might have better luck posting in an LG forum.
It could be a screen protector, but we are not familiar with the screen issues that the Optimus might have as we do not have that phone.

[Q] Privacy Screen Protector??

I just got my E4GT and really love everything about this phone. There is only one inherent drawback to having a large beautiful screen, everyone elses' eyes seem to also lock on to it. Anyone have a suggestion for a privacy screen and any feedback on them? Thank you in advance...

Midget Porn
It took the screen manufacturers almost 20 years to get screens this beautiful and now people make money selling devices to reduce the visibility. I understand your concern but are you really doing anything on your phone that the casual observer is going to be able to be nosy about? Are you watching Midget porn on your device's big screen? I realize Midget porn has a lot of benefits, like taking up less storage space and automatically being formatted for the smaller screens.....Ok, think about it for a second. It is funny.

Blu3Fr0g said:
It took the screen manufacturers almost 20 years to get screens this beautiful and now people make money selling devices to reduce the visibility. I understand your concern but are you really doing anything on your phone that the casual observer is going to be able to be nosy about? Are you watching Midget porn on your device's big screen? I realize Midget porn has a lot of benefits, like taking up less storage space and automatically being formatted for the smaller screens.....Ok, think about it for a second. It is funny.
Click to expand...
Click to collapse
hahahhaa that was funny, no need to have to think about it for a second

No, I totally understand about the midget po-- ... ... ...
Ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Sorry, I had to think about it for a second.

JoeBruin32 said:
No, I totally understand about the midget po-- ... ... ...
Ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Sorry, I had to think about it for a second.
Click to expand...
Click to collapse
Which hand did you use to think about it?
Sent from my PG41200 using xda premium

On a more serious note,
I recently ordered this privacy screen protector off on Amazon. It was the only real own I could find and the price was right. The shipment is supposed to come on the 22nd and I can post a review of it here once I get and install it if you want.
Link:
http://www.amazon.com/o/ASIN/B005S69CPK?tag=adapas02-20
PS. For some reason it was Prime enabled when I ordered it, but I doesn't look like it is anymore? Eh oh well.

Can you please post a review on this privacy screen protector. Does it cover left, right, top, bottom? hows the fitment? does it affect the touch screen? Post pic if you can too.
Thanks

Alright I've had it for a few days now ill post my full review.
As a screen protector, its a bit*h to install. You can't see the bubbles easily during the install so its hard to make sure you got them all without holding it in the right light. Next is that is doesn't quite fit the device. It could use about 2 more mm on the right side and the bottom, but if you center it up right during the install you probably wont notice. It does smug up with finger prints, but the nature of the screen protector makes it so you can only really see the smuges in the right light, so its not a big issue.
Now for the privacy part. First off if you got your Epic for its screen, walk away. The screen is noticeably darker and less brilliant. I got used to it pretty quickly but it is noticeable. It does do its job well of protecting your screen, as you can see here http://www.youtube.com/watch?v=AJT-wSelQmg&feature=youtu.be (Sorry about the music, I forgot to mute it lol, i hope you like Big B, also sorry about the quality, my best video camera is on the Epic) This does greatly increase privacy, but it does not do it to the "midget porn" level. If you wanna compare the video with your phone, I attached the image i used in the video.
Overall, I wish the screen was a little bit more brilliant, but for $4 this thing does it job well and I do not regret purchasing it.
EDIT: OH! And make sure you know where your touch buttons are at the button. With this protector on they all but disappear when the lights aren't on.

They suk ****. It will make your screen look terrible. I had one on for about 5 min B4 I peeled that crap off. Just my 2 cents.

TPU diztronic case review

Hello guys,
I ve been in the market for cases for my new galaxy nexus and got my hands on a couple diztronic ones and I posted the reviews on the correct forum however I couldn't leave my lovely s2 without one so I got one as well and reviewed it specially because I've seen people talking about it due its misalignment with some of the necessary hardware part. I made this video so you guys can check it and make your own decision ..
Pd.- I am in no way associated with Diztronic or any of its affiliates .Im just a phone junkie that started reviewing cases so people get a look before spending their money. Mods if I am breaking any rules please let me know
Enjoy and hope this helps
http://youtu.be/qYK9X7R0HKU
Sent from my SGH-T989 using xda premium

Thanks for your review. This just makes me wish that mine would ship here faster.... It looks sleek as hell.
Sent from my SGH-T989 using XDA App

Thanks for the review I ordered mine 9 business days ago and it hasn't arrived yet.. even hongkong shipped items only take 7 usually

SGS2X said:
Thanks for the review I ordered mine 9 business days ago and it hasn't arrived yet.. even hongkong shipped items only take 7 usually
Click to expand...
Click to collapse
Had mine shipped from Amazon with free Prime, but it somehow managed to take 5 days. The case itself is great, I see the misalignment issue with the mic hole, but I haven't really had any problems with that so far. It definitely fits better than the primitive T989 case on eBay that was extremely popular.

good review dude. Does it not bother you that you have particles stuck under your screen protector? Man that would eat away at me until I fixed it.

thank you for the kind words guys
im going to be honest on the shipping..I got mine in like three days..Im in the US so that might be why it was faster.
it indeed feels sleek as well..not adding volume nor size is a plus for me.
Yes , i had that case from ebay...which is now resting inside my drawer lol
i HATE the particles..it doenst matter if im in a surgeon table or with everything closed ...I always manage to get particles in..and not on the side but in the middle of the screen haha! but gladly i have a lot of them so right after the video I replaced it with another one
glad im able to help you guys...the more cases I get the more reviews I will be doing

rault18 said:
thank you for the kind words guys
im going to be honest on the shipping..I got mine in like three days..Im in the US so that might be why it was faster.
it indeed feels sleek as well..not adding volume nor size is a plus for me.
Yes , i had that case from ebay...which is now resting inside my drawer lol
i HATE the particles..it doenst matter if im in a surgeon table or with everything closed ...I always manage to get particles in..and not on the side but in the middle of the screen haha! but gladly i have a lot of them so right after the video I replaced it with another one
glad im able to help you guys...the more cases I get the more reviews I will be doing
Click to expand...
Click to collapse
have you tried the hot shower method? it really does work wonders, but it sure is uncomfortable in there.

Actually I haven't. Good idea. Will try that!
Sent from my SGH-T989 using xda premium

Ditto. Applying screen protectors must be the most annoying thing in the world...

the larger the screen protector, and the smaller the cutouts that you have to align, that worse it gets. Getting this crappy matte screen protector on my GS2 was a pain, now I don't even want it because it ruins the beauty of the screen.
I tried the hot shower method for the first time on my GS2 and it definitely made life easier as far as keeping dust suppressed goes, but any dust that gets stuck on the sticky side of the screen protector is still going to cause trouble.
Running it for ~10 minutes got the bathroom nice and steamy when I did it, don't humidify it to the point where it gets uncomfortable, but you do have to keep it running during the process =\
that was probably incoherent as hell and more of a rant than anything, but I've never been good at sorting my thoughts

henrycheng said:
the larger the screen protector, and the smaller the cutouts that you have to align, that worse it gets. Getting this crappy matte screen protector on my GS2 was a pain, now I don't even want it because it ruins the beauty of the screen.
I tried the hot shower method for the first time on my GS2 and it definitely made life easier as far as keeping dust suppressed goes, but any dust that gets stuck on the sticky side of the screen protector is still going to cause trouble.
Running it for ~10 minutes got the bathroom nice and steamy when I did it, don't humidify it to the point where it gets uncomfortable, but you do have to keep it running during the process =\
that was probably incoherent as hell and more of a rant than anything, but I've never been good at sorting my thoughts
Click to expand...
Click to collapse
I understand your frustration no worries there. So from what I have gathered from reading a lot of blogs and stuff:
1) Soak the screen protector (if it's a silicone adhesive that is water-resistant) in half water half isopropanol to clean the sticky side of the sp.
2) Apply screen protector in a steamy room.
So much work.. Especially since a lot of people have no trouble at all applying screen protectors regularly. Maybe I'm just fail

If you're careful, you don't have to soak the screen protector in anything, I didn't and it went on perfectly, that is...until my cheap eBay case started pushing the top right corner up. Just run a hot shower, and do EVERYTHING in there, even opening the screen protector. I live in a REALLY dusty apartment (no idea why) and I had very little trouble except for lining up the holes.

i have the same case, same issues at the bottom with the mic but it doesnt effect my calls. even with the minor imperfections, i would still recommend the case to others.

Never heard of the hot shower method before
I've applied many screen protectors ranging from Nintendo DSi to iPad2/Samsung Galaxy Tab and anything in between over the years, and never had any problems with bubbles or particles. The key is to have a brief bursts of canned air right before applying the screen protector and having a piece of Scotch tape in one hand in case any dust particles get in between. If that happens, I lift the screen protector little bit, touch the dust with the Scotch tape briefly, and continue the process. Scotch tape doesn't leave any residues behind (either on the screen or the screen protector depending on where the dust particle is) and it is readily available. Oh, and I always use powder-free latex exam gloves

badaphooko01 said:
good review dude. Does it not bother you that you have particles stuck under your screen protector? Man that would eat away at me until I fixed it.
Click to expand...
Click to collapse
Damn what if he never paid attention to it until you brought it up...now he has to go back and fix it

I finally received the case in the mail. Damn international shipping.
The case looks sleek. It fits perfectly. Haven't noticed any problems with the sound quality. I am satisfied. Will probably last very long until I decide to upgrade to like a seidio/otterbox/incipio ccase.

I font like cases that make the phone bigger ..love the protection they offer but hate the bulkiness
Sent from my SGH-T989 using xda premium

They just came out with a revision that fixes the mic being covered. I think I may buy it now.

Yea I saw the revision update on amazon a couple days ago. But I have some ebay bucks to use so I want to get it on ebay but there doesn't seem to be a revised one up yet.

ArcticWolf91 said:
They just came out with a revision that fixes the mic being covered. I think I may buy it now.
Click to expand...
Click to collapse
Damm I already got mine LOL... I still like it though.
Sent from my SGH-T989 using XDA App

Best Screen Protector

Hi All,
Currently have a One X, love the phone, apart from the battery life and the locked bootloader. However it has managed to "gain" two 1 cm scratches that are really quite deep and very visible.
So I now have a Blue S3 on order, due with me on Monday, and I don't want to find myself in the same boat in terms of screen scratches, I just can't deal with having the screen messed up (maybe I'm a bit OCD).
Anyway, to the moral of the story, can people please give me suggestions for the best screen protector for the S3, I want to protect but I don't want to take anything away from the screen, I remember putting a zagg on an iPhone 4s, and it took the edge of the clarity of the display, and I don't want that at all for the S3.
I have searched and can't find a similar thread, apologies if there is.
Help greatly appreciated.

Stokie2012 said:
Hi All,
Currently have a One X, love the phone, apart from the battery life and the locked bootloader. However it has managed to "gain" two 1 cm scratches that are really quite deep and very visible.
So I now have a Blue S3 on order, due with me on Monday, and I don't want to find myself in the same boat in terms of screen scratches, I just can't deal with having the screen messed up (maybe I'm a bit OCD).
Anyway, to the moral of the story, can people please give me suggestions for the best screen protector for the S3, I want to protect but I don't want to take anything away from the screen, I remember putting a zagg on an iPhone 4s, and it took the edge of the clarity of the display, and I don't want that at all for the S3.
I have searched and can't find a similar thread, apologies if there is.
Help greatly appreciated.
Click to expand...
Click to collapse
Wow, useless thread and that too in wrong section.
Press the "Thanks" button below if I've helped.

I think screen gards don't cost more than a dollar
What's the issue in trying one, but it's not a major thing to start a thread that too so big and huge
Press the "Thanks" button below if I've helped.

Hi, my s3 glass scratched within a week, thankfully around the home button, not the display & I'm pretty obsessively careful. I bought the otterbox commuter case and installed the included screen protector. I can see no effect on the brightness or clarity of the screen, but it was a bugger to get on right & only just covers the display area of the glass, leaving a lip that my finger catches on when I'm swiping from the edges of the screen. It's pretty annoying but I'll live with it for the protection, a bit like using a condom!
Sent from my GT-I9300 using xda app-developers app

rishabho1 said:
I think screen gards don't cost more than a dollar
What's the issue in trying one, but it's not a major thing to start a thread that too so big and huge
Press the "Thanks" button below if I've helped.
Click to expand...
Click to collapse
Anyways, he won't live his life with the same screen protector he can obviously change.
Press the "Thanks" button below if I've helped.

Jees, gotta love those folk who feel the need to take the time to post not 1, but 2 totally pointless and non helpful replies, when posting 1 helpful reply or adopting the "I have nothing good to say so I won't say anything" mantra would save him and everyone else the time.
I was hoping for a decent response, so I can order 1 now, so it arrives in time for the phone, which was Monday. So I don't have to go any time without protection, and get a scratch like 1 poster mentions.

IMO the best one is the clear one as i tried many, stay away from the matt or antiglare cause it cause a washed screen and dimmed colours.
They are selling it on ebay a pack of 6 for 3 pounds. hope that will help you

I've had done generic one which came with my case, a momax one and now I'm into a barely there.
The barely there is the best of the ones I've tried. It's matt finish so it does change the look of the screen slightly, it is a tiny but blurred now, but it's quite a small effect and once gotten used to it. The positive effects of using a matt protector are that my screen has no glare or reflection in the light now, making it easier to read when a light source is shining onto it. Also, while the glossy ones quickly become covered in fingerprints, they are quite hard to spot in this one.
It seems to be of decent strength and thickness. Have me a slightly better overlap in the edges than the first two I tried. Worked out cheaper as well ... for a twin pack for the same price as the one momax.
Sent from my GT-I9300 using Tapatalk 2

Good move as i also got rid of my one x in record time...one week!
Sent from my U8815 using Tapatalk 2

Stokie2012 said:
Jees, gotta love those folk who feel the need to take the time to post not 1, but 2 totally pointless and non helpful replies, when posting 1 helpful reply or adopting the "I have nothing good to say so I won't say anything" mantra would save him and everyone else the time.
I was hoping for a decent response, so I can order 1 now, so it arrives in time for the phone, which was Monday. So I don't have to go any time without protection, and get a scratch like 1 poster mentions.
Click to expand...
Click to collapse
what do you mean this thread is useless?
ur right !
by d way wrong forum lol

rishabho1 said:
what do you mean this thread is useless?
ur right !
by d way wrong forum lol
Click to expand...
Click to collapse
How is this the wrong forum if he's asking about a screen protector for his new S3??
Sent from my SPH-L710 using Tapatalk 2

Matte screen protector
I ordered a matte protector for my S3.
Looked and felt really nice, kept finger prints off, but at the end of the day after a week or so i wanted to look at the screen with nothing on it at all. Looks far better.
Maybe a sock or something to keep it in is better than a protector ??

thesponz said:
I ordered a matte protector for my S3.
Looked and felt really nice, kept finger prints off, but at the end of the day after a week or so i wanted to look at the screen with nothing on it at all. Looks far better.
Maybe a sock or something to keep it in is better than a protector ??
Click to expand...
Click to collapse
I thought I was the only one, I bought a matte one, but now I want my regular hd screen back lol

Guest69 said:
Hi, my s3 glass scratched within a week, thankfully around the home button, not the display & I'm pretty obsessively careful. I bought the otterbox commuter case and installed the included screen protector. I can see no effect on the brightness or clarity of the screen, but it was a bugger to get on right & only just covers the display area of the glass, leaving a lip that my finger catches on when I'm swiping from the edges of the screen. It's pretty annoying but I'll live with it for the protection, a bit like using a condom!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Mine also scratched at the home button, to be more spesific, at the back butto.

I think the best so far is the sgp nano clear.

Coverycases full adhesive tempered glass screen protector...

Hey all long time stalker here Lol!
Came across a full adhesive case friendly tempered glass screen protector from a company called coverycases...
It actually showed up in my Facebook feed and I'm wondering if anyone has had any experience with it?
It says it's their 3rd gen and I've never heard of them...
Any input would be appreciated!
Thanks
-Corey
Sent from my SM-G955U using Tapatalk

https://covery.com/products/case-fr...-glass-screen-protector-for-galaxy-s8-s8-plus
Sent from my SM-G955U using Tapatalk

Looks promising, but waiting for reviews

tylerlawhon said:
Looks promising, but waiting for reviews
Click to expand...
Click to collapse
Exactly what I was thinking...
Sent from my SM-G955U using Tapatalk

Not sure if they are the same, but this looks like a rebranded version for a little cheaper on the 'zon: http://amzn.to/2njjC7o

pinoymutt said:
Not sure if they are the same, but this looks like a rebranded version for a little cheaper on the 'zon: http://amzn.to/2njjC7o
Click to expand...
Click to collapse
I've Tried this one and seems to work well. Only have had it for about 3 days and clarity and touch sensitivity has been great. I've attached some pictures but if you want more let me know.
I'll try to update in a week and if you need another update let me know.
It is a bit of work to put on but if you do it correctly you should be good without bubbles. But as other full adhesives, it is as most if not installed well you will likely get bubbles and won't disappear.
It has been the only full adhesive at the price range to work well and using it with the Spigen tough armor case.
Also, like others with a black bar on the side, it does disturb the screen a bit as shown in the second picture. Which is similar to the Otao screen protector I used before installing this one. It is not a bother to me but it could be a bother to some.

My favorite thing about the site is that they have a "you've unlocked a mystery discount" spinning wheel for entering your email address. I entered my email address and spun, I won "free shipping" only thing is they already offer free shipping. So, essentially I won exactly what they already give away to everyone.
Useful.

lmanlo said:
I've Tried this one and seems to work well. Only have had it for about 3 days and clarity and touch sensitivity has been great. I've attached some pictures but if you want more let me know.
I'll try to update in a week and if you need another update let me know.
It is a bit of work to put on but if you do it correctly you should be good without bubbles. But as other full adhesives, it is as most if not installed well you will likely get bubbles and won't disappear.
It has been the only full adhesive at the price range to work well and using it with the Spigen tough armor case.
Also, like others with a black bar on the side, it does disturb the screen a bit as shown in the second picture. Which is similar to the Otao screen protector I used before installing this one. It is not a bother to me but it could be a bother to some.
Click to expand...
Click to collapse
Does it have the annoying blue line going down each side of the edge screen? All of this type of protector that I've tried had that and I hate it.

ajsmsg78 said:
Does it have the annoying blue line going down each side of the edge screen? All of this type of protector that I've tried had that and I hate it.
Click to expand...
Click to collapse
I haven't seen or don't know what the blue line you are meaning. But as mentioned it does have the Black bar that many hate on the sides as shown in one of the pictures I posted.
That is the main drawback of this one. I could tolerate as many what I see does not cause problems but this is something that everyone hates. See the picture with the reddish orange sides and see the black bar that is in between or I will try to take another picture tonight or tomorrow and post it here.

lmanlo said:
I haven't seen or don't know what the blue line you are meaning. But as mentioned it does have the Black bar that many hate on the sides as shown in one of the pictures I posted.
That is the main drawback of this one. I could tolerate as many what I see does not cause problems but this is something that everyone hates. See the picture with the reddish orange sides and see the black bar that is in between or I will try to take another picture tonight or tomorrow and post it here.
Click to expand...
Click to collapse
Yeah, the bar on the sides is annoying. Thanks.

Some more pictures as well showing the black bar

Update it has been good without any problems. It has been a little over a week since installing it and has maintained a good seal without any dust in the edges.
Clarity is better than TGSP with the only adhesive on the edges, as well as the showing of fingerprints as well.
Overall the best I've had so far for a Full Adhesive. The only drawback as mentioned is the bar on the sides as shown in pictures.
The only thing I haven't gone back to the Whitestone has been because of the screen lifting up after removing due to bubbles being distracting.
This could the next best Full Adhesive if you are able to withstand the bar on the sides.
Also ordered the one on Amazon if you are interested in which one I got.

Very good product. Full adhesive. Haven't try it underwater. Hopefully won't come off underwater