Problems with Getting Apps on SD, Froyo 2.2, Detailed Info - Tilt, TyTN II, MDA Vario III Android Development

Problems with Getting Apps on SD, Froyo 2.2, Detailed Info - Tilt, TyTN II, MDA Vario III Android Development

I tried just about every tutorial to get My android apps on my SD, none work. Kaiser winmo i flashed to super incubus froyo Rsl13. I partition my SD card. when resetting the phone I hold center D to get to launch installer and put nand to sys and data to SD partition and also tried EXT2. Both did not work. Next i did terminal emulator on the phone did Su... pm installsetlocation 2... i checked it, it shows 2[external]. I wiped, tried it, did not work. Tried to install SDmove or those marketplace app movers. errors and cannot install. neither move to SD default program in android, for games or etc..
Is this cause of old kernel i flashed? It's pretty new i think, it adds the extra 11mb
UPDATE:
Here's my bootlog info
** /dev/block/mmcblk0p1
** Phase 1 - Read FAT (compare skipped)
Attempting to allocate 7564 KB for FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
Next free cluster in FSInfo block (46) not free
Fix? yes
311 files, 1291024 free (1371332 clusters)
sh: 0: unknown operand
mount: mounting /data/sysfiles/su on /system/bin/su failed: No such file or directory << This the problem?

I don't think apps2sd works if /data is on SD, I may be wrong of course, however have you tried sys and data on nand, with an EXT2 partition on SD? This is the 'standard' method on native android devices.

zenity said:
I don't think apps2sd works if /data is on SD, I may be wrong of course, however have you tried sys and data on nand, with an EXT2 partition on SD? This is the 'standard' method on native android devices.
Click to expand...
Click to collapse
I have tried sys and data on nand and use androids froyo 2.2 default move to SD under settings and nothing. By apps2sd i mean't getting apps on SD sorry. I updated the post though. But now my computer SD reader won't work so i have to fix that then I will try sys and data on Nand with a EXT2 partition, i haven't tried that yet. thankyou for feedback i will get back to you on this.

'mount: mounting /data/sysfiles/su on /system/bin/su failed: No such file or directory' This error message appears on just about every android build I think, this one refers to the systems inability to find the file 'su' on either of these directories.
It does not seem to have any effect on anything, it's just an old and pretty much ignored error.

You could try out Kalt Kaffe,s relocate apps to sd script. It is very easy to setup and it only moves apk files from your system/app folder to SD.
Sent from my Full Android on Vogue using XDA App

Are you try it? http://forum.xda-developers.com/showthread.php?t=750768
The relocate_apps.sh is a script that relocates all your apps into an EXT2 filesystem in /sdcard/andboot/apps.img.

Related

[Q] How to create an Apps2SD partition.

I'm using ClockworkMod Recovery 2.5.0.1 and i've seen a couple of guides where I go into the recovery and do some bits and bobs there to create it, but the only options I seem to get are to mount the sd-ext partition, which fails because it doesn't exist, or to format it.
I'm guessing there is a step beforehand i'm missing?
Thanks

download rom manager from market , open it , then create a ext3 partionion ... done
before you create a partition , backup your sd card!!

y2viks said:
I'm using ClockworkMod Recovery 2.5.0.1 and i've seen a couple of guides where I go into the recovery and do some bits and bobs there to create it, but the only options I seem to get are to mount the sd-ext partition, which fails because it doesn't exist, or to format it.
I'm guessing there is a step beforehand i'm missing?
Thanks
Click to expand...
Click to collapse
I had the same problem.
You can create the partition using the ROM Manager app downloaded from the market as yasars said.
Alternatively, if you want to do it manually, you can format the card on a *nix system. The Gparted Linux app lets you edit the partitions in a nice and simple GUI. Just remember the order of the partitions: first fat32, then about 512 MB of ext2/3/4 (ext4 may not be supported by all ROMs so better to use ext3) and lastly a swap partition of about 32 MB (totally optional). The size of the fat32 partition is whatever is left over after you've allocated the 512 MB for the ext2/3/4 partitions (and the 32 MB for the swap if you decided you wanted it). For instance, for a 2GB card, leaving 512 MB for the ext2/3/4 partition (no swap) leaves us with about 1.5 GB for the fat32 partition. You do the calculations for your card in your head or on paper and use those values in Gparted.
HTH.

Thanks for the help guys
I think i'll just get it up and running using the ROM Manager and if I find the need I'll do a manual version

Foolowing this guide I partitioned my sd card with GParted Live CD.

gianton said:
Foolowing this guide I partitioned my sd card with GParted Live CD.
Click to expand...
Click to collapse
You have no Idea how cool it is for me that my tutorial was useful... ;-)

chrysochire said:
You have no Idea how cool it is for me that my tutorial was useful... ;-)
Click to expand...
Click to collapse
Yes it should be a sticky!

Having a problem when I try to use ROM Manager.
I select the 512 for EXT and 32Mb for Swap and the phone reboots.
It then shows the big triangle with Mr Android next to it until I press some buttons and then I get the recovery screen with the following messages
Finding Update Package....
Opening Update Package....
Verifying Update Package....
E:failed to seek in /cache/update.zip (Invalid Arguement)
E:signature verification failed
Installation Aborted.
I don't have a cache folder on my sd card so i'm guessing it's looking in the internal memory?
Not sure what to do here

BACK-UP sd card before you do this.
For windows users
have clockwork recovery and rom manager on your desire
then format sd in windows.
put it in your desire and go to rom manager.
select Partition SD Card
select your space i used 32 swap 512 ext
than reboot and your sd card has the ext partition.
than put your files back on your sd card and Done

y2viks said:
Having a problem when I try to use ROM Manager.
Click to expand...
Click to collapse
I had the same problem with ROM Manager. My solution was to downgrade ClockworkMod Recovery to v2.5.0.0 (in ROM Manager) and then partition the card. Worked on first try.
When you're done you can upgrade to latest version again if you want.
I don't think you should use a swap partition, so just set it to 0 MB.
Good luck!

Do i just need to find the 2.5.0.0 update.zip file and flash?

going to 2.5.0.0 worked
so now i have the ext partition do I need to do anything for apps to be installed there, or will they install there by default?
Also i've heard that the ext partitions can be 2 3 or 4. I'm presuming higher is better. How do I go about finding what mine is and how can I upgrade it if it need it?
Thanks

chrysochire said:
You have no Idea how cool it is for me that my tutorial was useful... ;-)
Click to expand...
Click to collapse
Hi, I'm also going to give your guide a go. Just one question, do I have to do it with the SD card still in the phone or can i do it with a SD USB adapter?
Thanks,
Joe
I read the tutorial again and you can use an SD adapter, worked a treat. Cheers

y2viks said:
going to 2.5.0.0 worked
so now i have the ext partition do I need to do anything for apps to be installed there, or will they install there by default?
Also i've heard that the ext partitions can be 2 3 or 4. I'm presuming higher is better. How do I go about finding what mine is and how can I upgrade it if it need it?
Thanks
Click to expand...
Click to collapse
As long as you have an ext2/3/4 partition and the ROM you're flashing has A2SD support (check before you download the ROM), you are not required to do anything more. To check whether A2SD is working once you've flashed your ROM, download the Android Terminal Emulator app from the market and use the following commands
Code:
su
ls -l /data
You should see your app directory pointing to /system/sd/app and app-private pointing to /system/sd/app-private
I'm not sure which format ROM Manager defaults to, but you can always check the type of format used by mounting the card in Linux and using the GParted Linux app (you could use a card reader or use the 'Disk Drive' option in your phone to connect it to the computer). Also, ext3 should be fine for most custom ROMs. In fact, not all ROMs support ext4.

ikkokusenkin said:
As long as you have an ext2/3/4 partition and the ROM you're flashing has A2SD support (check before you download the ROM), you are not required to do anything more. To check whether A2SD is working once you've flashed your ROM, download the Android Terminal Emulator app from the market and use the following commands
.
Click to expand...
Click to collapse
- Another quick way is to install quick system info from the Market, it tells you infos about your system, including the use of your a2sd partition.... ;-)
- About ext 2/3/4 I would advise the use of ext3, as ext4 is poorly supported by Roms (even those who pretend seem to have issues...)
cheers

Does the decrease of available internal storage means apps22sd+ is not working? I've partitioned twice and installed seperate 2.2 roms with apps2sd+ included and every time I install more things I see internal storage drop.
You should see your app directory pointing to /system/sd/app and app-private pointing to /system/sd/app-private
Click to expand...
Click to collapse
I checked this and it's doing what you said

ikkokusenkin said:
As long as you have an ext2/3/4 partition and the ROM you're flashing has A2SD support (check before you download the ROM), you are not required to do anything more. To check whether A2SD is working once you've flashed your ROM, download the Android Terminal Emulator app from the market and use the following commands
Code:
su
ls -l /data
You should see your app directory pointing to /system/sd/app and app-private pointing to /system/sd/app-private
Click to expand...
Click to collapse
I took the liberty of including this information into my tutorial. I added a reference to you. ;-)
I hope this makes it to Sticky one day... ;-)

bloosteak said:
Does the decrease of available internal storage means apps22sd+ is not working? I've partitioned twice and installed seperate 2.2 roms with apps2sd+ included and every time I install more things I see internal storage drop.
Click to expand...
Click to collapse
Not in itself, no. Those symbolic links mean that A2SD is working fine. However, from what I understand about the theory, even A2SD installs a part of the app into the internal memory. That may explain the drop you see. By the way, how much free memory do you see on your device? I usually have about 140 MB free on my Desire. I read somewhere that if A2SD wasn't working, that figure would be about 90 MB.

chrysochire said:
I took the liberty of including this information into my tutorial. I added a reference to you. ;-)
I hope this makes it to Sticky one day... ;-)
Click to expand...
Click to collapse
Thanks. Although, I can hardly claim to have come up with the idea myself.

ikkokusenkin said:
Not in itself, no. Those symbolic links mean that A2SD is working fine. However, from what I understand about the theory, even A2SD installs a part of the app into the internal memory. That may explain the drop you see. By the way, how much free memory do you see on your device? I usually have about 140 MB free on my Desire. I read somewhere that if A2SD wasn't working, that figure would be about 90 MB.
Click to expand...
Click to collapse
108 free total of 148
I just recently opened spare parts apps where it allowed me to change where apps2sd installs things. By default it was set to automatic and I'm guessing that was causing the problem. I set it to external and tried installing a browser while my disk was mounted and it wouldn't let me do it. Then I set it to charge mode and it installed normally.
Some roms probably default to external while some automatic.
edit: Just installed an app that I previously installed while using "automatic" and it still uses up internal storage instead of A2SD storage. Dunno what's wrong. I am using ext2 partitioned through rom manager.

[DEV][19NOV] Native Mount DataOnEXT with DalvikOnNAND (Test #2)

Index
Post 1 - Android Boot Process, Space Restrictions in /data, Usual Workaround scripts that load from init.d
Post 2 - The Permanent Solution for Internal space issues in /data, and how it is executed (Step by Step)
Post 3 - Credits, Benefits, Note on Cache, Note to ROM Makers on ClockWorkMod Updater Script, FAQ
Post 568 - Test ROM for Native Mount DataOnEXT with DalvikOnNAND
Post 622 - Test #2 ROM for Native Mount DataOnEXT with DalvikOnNAND
Thanks to quite a lot of inputs, ideas, testing and feedback, I have been able to give a working solution to reliably mount /data to the EXT partition in our HD2’s SD Card before Android initializes. I am redoing the first three posts of this thread to give a complete info that answers the what, why, how questions.
Before I even start, let me make my objectives clear:
Have a system partition that is as big as I want in NAND, so that I can install any bloated ROM I want without chopping down anything, and yet have a /data partition for all my apps and their bloated data
Avoid using internal (NAND) userdata partition completely, so that if the day comes where my /system is full of bad blocks, I will still be able to create a system partition in the ~900+ MB internal NAND my TMoUS HD2 has
With this method, this is how I am using my phone:
Device - TMoUS HD2
Boot Loader - cLK 1.5.0.9
Partitions (in order) and Sizes - Recovery - 10 MB, Boot - 10 MB, System - 500 MB, Userdata - <I didn't bother >, Misc - 1 MB, Cache - 2 MB.
Recovery - CWM Based Touch Recovery B8
SD Card - 16GB Transcend Class 6 with 4 GB EXT4 Partition (mounted as /data, of course!)
My idea for this setup is that a user should not be having to get into the boot loader or changing partition sizes for every ROM. With this setup, I am having a close-to-native-Android device setup and can flash any ROM I want, without worrying if my partitions will accommodate it.
So what exactly does this method do? Before I answer that, a brief on the Android booting process – Note that this is simplified to meet this thread’s requirement, and not necessarily completely accurate. When you power on the phone the following actions happen…
The Android Boot Process
Bootloader – In HD2’s case, Magldr or cLK – loads the kernel based on how you have configured the phone.
Kernel – The kernel (zImage) is loaded into RAM along with an initial ramdisk (initrd.gz), which initializes various devices (IO, memory, GPU, etc.), interrupts, and mounts the root file system (/). After this, the first user-space process called init is started.
Init – this is a binary file that is contained within the initrd.gz. The init binary processes init.rc and init..rc , along with other .rc files that are called by these two .rc files. Some of the key functions (from this thread’s perspective) in the order of their initialization/ execution are:
The init process follows the instructions in the init.rc and init.xyz.rc files and creates empty directories including /data. It then mounts the storage devices (partitions in the internal NAND (MTD)) to these empty directories. The NAND partition for system is mounted to /system, followed by the partitions specified for data, cache, etc. The directories for dalvik-cache (/data/dalvik-cache) are also created by the init process after mounting the specified device to /data.
The init process then starts various services including adb, service manager, Volume Daemon (vold) for media like SD Card (FAT partition). Most importantly, the zygote service which initiates the Dalivk-Cache is loaded in this sequence.
As we all know, Android is based on Linux. The boot sequence described above is common for all Linux machines – until the zygote stage. Core Android file like core, framework, services, IME, policy, etc. are executed from the Dalvik-Cache and hence Initialization of the Dalvik Cache is pretty much where Android comes into the picture
The sysinit/ run-parts part, which runs scripts from the /system/etc/init.d later the Zygote stage. No matter how this is done, Android has already started loading by the time the boot process comes to executing scripts in /system/etc/init.d
Now that you know what happens when Android boots, you may also have realized that mounting a device to /data happens early in the boot process.
Space Restriction in HD2, and the twist with bad blocks
The 'normal' way to store all OS data (dalvik-cache, Configurations & Settings, Accounts, etc.) and User data (Apps, app data, mails and messages, call logs, etc.) is to have a partition named userdata in the HD2’s NAND, and have it mounted to /data during the init process. The drawback in using the userdata partition is that the space you can have for userdata is inversely affected by the size of your system partition, and whether your phone is an EU/ International HD2 or a TMoUS HD2.
Best case is, if you have a ~100 MB system partition for a really scaled-down, space-optimized OS, you will get about 800+ MB for userdata partition on TMoUS and ~400 MB on an International/ EU HD2. This space might be good enough for a lot of us who only have light-to-medium use of our phones. But for quite a lot of us, this is a bottleneck. As if that is not enough, we have these villainous bad-blocks that creep up slowly, determined to swallow up the internal NAND completely, though it would be several years down the line before that happens
The Workaround
The workaround for this method is to have a script in the /system/etc/init.d that mounts the EXT partition in the SD Card to sd-ext, moves a part of /data from the userdata (NAND) to the EXT partition (sd-ext) and creates symlinks (symbolic link) in /data (userdata) to point to the new location in the EXT partition. In this method you will not see an increase in what the phone shows for internal space. The apps you install and then some more will be installed in the EXT partition, which will be symlinked as /data/app and so on.
The other way is to move the mount point (and the contents) for the /data directory from userdata (NAND) to the EXT partition in the SD Card, mount the userdata (NAND) as sd-ext or some other directory, create dalvik-cache (and maybe /data/data - where all user apps' data are stored) in the userdata and symlink that location back to the EXT partition (which is now /data). In this method, you will get the size of your EXT partition as the internal space. Moving parts of /data to NAND will in theory give you better performance, as the most read/ written part of the phone resides in NAND.
The benefit of these methods is that it is very simple and easy to install on any rooted ROM through the recovery. This method balances performance by moving the static part of /data (like the .apk you install) to the EXT partition, keeping the dynamic part (/data/data – where all app data are stored, or /data/dalvik-cache – from where all apks are executed) in NAND.
The drawbacks with this workaround:
This method is initiated AFTER Android boots. No matter how it is executed or what it does, anything that loads from /system/etc/init.d is executed only after at least some parts of Android loading process is initialized. This leads to weird outcomes – low sound issues, unpredictable behavior of the OS or some apps (Notification Widget toggles not working, etc.), and then some more. There is no reasonable way to predict what issues you may get. In fact you cannot be sure if the issue is with the ROM or if the issue is occurring because of the move2sd script you are using. If you are facing an issue that none others are facing and if you have a move2sd script, then you MUST undo what the script does before you can start troubleshooting.
In some cases, an in place upgrade (upgrading from one version of the same ROM to a higher/ newer version, or upgrading from one ROM to another ROM of the same Android version/ build) will corrupt the apps' data as well as configuration, etc.
Moreover, one move2sd script that works fine with one ROM will not work exactly the same way with another ROM or even an updated version of the same ROM.
There is always some amount hit or miss involved in this workaround!!!

The Solution
…is what this thread is all about. Like we saw, /data directory is mounted to a storage device pretty early in the boot process – so early that it is only Linux at the time /data gets mounted and Android is still yet to be loaded. The storage device that is traditionally mounted to /data directory is the internal NAND’s userdata partition.
The simple solution I have for unrestricted and reliable internal space is to directly mount the EXT partition of the SD Card to /data during the Linux init process (instead of first mounting the NAND’s userdata, loading Android, and moving the /data mount point or some contents within /data to the EXT partition while Android is loading).
How is this done?
The Easy way - Thanks to @Kokotas (Note that I have not updated Kokotas' .zip file to include the recent changes (20th October 2012) (See The Long Way below)
Visit the post (quoted below), thank @Kokotas, download the .zip from the post, flash it in recovery and lets us know how it goes. Did I tell you to make sure you have a NANDROID backup?
This .zip can be used to install DataOnEXT mod on the fly - your ROM will be the same when you reboot after flashing this .zip, except that /data will be mounted from the EXT partition with all your apps, settings, etc. intact.
kokotas said:
If you have a normal NAND installation(and an ext2/3/4 partition on your card) and want to give ph03n!x's DataOnEXT method a try,
BUT you think it is difficult THEN you can try the attached recovery package.
It follows all the steps of the described process AND at the end it copies all of your /data to the ext2/3/4 partition. <= This means that after rebooting, you'll have your system set up as before but with DataOnEXT!
And if you want to go back to your previous setup (that is a normal NAND installation without DataOnEXT), just flash the original kernel to your device.
Have in mind that I have only tested it on my phone. If you do try it, please leave a comment. Especially MAGLDR users! Cause it is not tested with MAGLDR.
Thank you ph03n!x for a great concept!
Click to expand...
Click to collapse
The Long Way (or this is how I started off doing this mod )
The following steps show how to modify a ROM’s boot process to mount the EXT partition as /data.
IMPORTANT: THIS PROCESS INVOLVES USING DISXDA’s KITCHEN in CYGWIN. I EXPECT YOU TO BE ABLE TO SETUP CYGWIN AND USE DSIXDA KITCHEN. EVEN WHILE I AM TRYING TO GIVE A STEP-BY-STEP HERE, I WILL NOT ANSWER QUESTIONS ON HOW TO SETUP AND TROUBLESHOOT DSIXDA’s KITCHEN OR CYGWIN.
Assumption:
For the sake of simplicity, I am going to assume that you have a ROM that is installed in your phone, and you want to modify the same ROM for natively mounting EXT to /data.
I am also going to assume that your HD2 has a SD Card in it, and the SD Card has been partitioned in such a way that the first partition is the FAT partition that Windows sees, and the second partition is a EXT2/3/4 partition. You may or may not have a Swap partition, but I strongly recommend NOT enabling Swap.
Prerequisites:
Take a NANDROID backup using ClockWorkMod
Back up all user apps and system app data using Titanium Backup
Install Cygwin
Install @dsixda’s Kitchen
Install Notepad++ (or any other UNIX compatible text editor)
@dsixda’s Kitchen – Setting up a working folder
While these steps will involve the entire ROM, note that you will only using the boot directory or boot.img for this mod.
You need a rom.zip file that has at least these three directories when you open the .zip – META-INF, system, boot (or boot.img)
If your rom.zip file has a different structure, just extract the three directories alone from it and create a new zip. Essentially, when open the rom.zip you should see only these three directories
An Example:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Place this zip file in the original_update directory under Kitchen. A sample directory structure of the Kitchen is as follows:
From Command Prompt, run cygwin.bat, browse to the directory where you have installed the kitchen and run it using ./menu
Select option 1 for setting up a Working Folder, follow instructions. Congratulation! You should have a working folder now. After the Working Folder is setup, navigate to the WORKING_091712_123456 directory. Make sure you have a directory named boot, or a boot.img here. To be double sure, you can replace the boot directory or boot.img with the one from the ROM you want to modify and flash.
Steps for mounting EXT to /data
Back in the Kitchen Menu, select 0 for Advanced Options
Select 20 for Tools for boot image
Hit z for Extract kernel+ramdisk from NAND boot folder (or w for Extract kernel+ramdisk from boot.img)
Now navigate to the BOOT-EXTRACTED directory that got created under the directory where you installed the kitchen. You will see something similar to this:
Edit init.rc and init.htcleo.rc to find all mentions of sd-ext and comment them out with # in the begining. This step is to ensure there is no directory called sd-ext when your phone boots, avoiding any confusions
In init.rc, look for the on fs part. Under this part there will be a line that reads mount yaffs2 [email protected] /system noatime nodiratime. Below this will be another line that reads mount yaffs2 [email protected] /data nosuid nodev noatime nodiratime. Comment this line out with a # (#mount yaffs2 [email protected] /data nosuid nodev noatime nodiratime). Also, if you have mount yaffs2 [email protected] /system ro remount, comment that out too (make it #mount yaffs2 [email protected] /system ro remount)
Do all the following changes AFTER mount yaffs2 [email protected] /system noatime nodiratime, else the process will fail.
Code:
# Wait to ensure SD Card is available, and scanning file system of EXT
wait /dev/block/mmcblk0p2
wait /dev/block/mmcblk0p2
wait /dev/block/mmcblk0p2
wait /dev/block/mmcblk0p2
exec /system/xbin/busybox sh -c "/system/bin/e2fsck -f -p -t -t -v /dev/block/mmcblk0p2 > /system/fsck.log"
# Native Mount DataOnEXT
mount ext4 /dev/block/mmcblk0p2 /data wait nosuid nodev noatime nodiratime barrier=0 data=writeback
Leave everything else in this section as is - you will have another line to mount cache, do not remove or modify it.
Next, scroll down to the section that reads on boot. Add the following like under it:
Code:
# SD Card Cache
write /sys/devices/virtual/bdi/179:0/read_ahead_kb 2048
Build the NAND boot folder (for Magldr yboot) or boot.img (for cLK / Magldr rboot) as per your requirements
Head back to the Working folder, copy the boot directory or the boot.img and include it in your original ROM’s zip file (not the one you created for the kitchen, in case you had to). Check the init.d directory of the ROM’s zip to ensure there is no script that mounts the EXT partition to sd-ext directory, or has a move2sd/ app2sd/ int2sd script – delete such scripts!. Also make sure that your ROM's inatallation does not copy anything to /data during Installation. If it does, move those parts to /system. Or use the instructions I had given under Note to ROM Makers on ClockWorkMod Updater Script to mount the EXT partition as /data in Recovery.
Format your phone’s /system, /data, / sd-ext and /boot from clockworkmod and flash this modified rom.zip
Let your phone boot into Android and settle down.
Configure your Google Account
Download and install Titanium Backup
In Titanium Backup, restore all apps and their data from the backup you had taken earlier
You phone must now have an internal storage that is roughly equal to the size of your SD Card
Note:
I have tested this method with CM7, CM9, CM10 (ParanoidAndroid JB) and Sense ROMs. There has also been feedback that this is working on other AOSP based ROMs like MIUI.
The mount wait command is available in the init binary from CM7 onwards (not sure if it is there in CM6). If you are not sure (or cannot check the source code for init.c)

Misc & Changelog
Credits
All the Devs who are contributing their valuable time to get Android working on our phones
Proz0r for implementing something very similar to what I had wanted. He has essentially implemented the same thing, I am implementing this in a slightly different way, that's all. (To be clear, I did not borrow the idea even though a few others have had the same brainwave that I thought I got first - I only borrowed the part where we have the phone wait until the sd-ext partition is ready for being mounted)
Rick_1995 for the first hint to get this modification to work
Securecrt for showing that this modification is indeed possible
Xylograph for pointing me to another thread where this modification is already done
marco.palumbi - for showing me that I need not have an elaborate script to ensure /dev/block/mmcblk0p2 is available, and a mount... wait option is available in the CM source for init. Also for doing away with the need for extprep script and including the e2fsck routine complete with a fsck.log in init.rc itself.
kokotas - For the recovery-flashable version of this mod that simplifies migrating to DataOnEXT
Some of the benefits of this mod are:
Space - Obvisiouly. The 1GB/ 2GB/ 4GB sd-ext partition will be mounted as internal memory, instead of the usual /data partition from NAND
Reliability - EXT4 partition is arguably more reliable than YAFFS2
Working around Bad Blocks - Most of our phones would be having a bunch of bad blocks by now (lucky you, Hynix NAND folks!). With this method, the /data partition is mounted directly to the EXT partition in your SD Card, and the internal userdata NAND partition is untouched. This means you can create bigger system partitions to work your way around bad blocks. Incidently all the bad blocks my phone has is in the userdata partition - this might be so because that is the area that is written to the most.
Performance - A fast SD Card gives better transfer speeds than NAND (My ParanoidAndroid build is noticeably faster after this modification, with my Class 6 Transcend SD Card with 4GB sd-ext partition)
Simplicity - Don't have to worry about hoards of the a2sd scripts and their variants, and carry-out trial and error as to which ones work reliably with your ROM of choice. /data is transparently and natively mounted to sd-ext, so no more low-sound or other odd issues
/data/data can be in the sd-ext partition, and ROM updates will not corrupt it like in some a2sd scripts
Hassle-free - Whether an EU HD2 or TMoUS HD2, you set a large size (445 MB?!!) for /system and forget about partitioning, as the internal userdata partition is not used at all and can be of whatever size. I am using 300 MB system in both my phones. This is close to native Android phones, where we do not keep changing the system partition size for every ROM that is installed.
A proper multi-user setup - if you had to share the phone with someone else, all you have to do is swap out the SD Card you usually have in the phone to a fresh one that has the required FAT and EXT partitions. The other user will see a fresh Android install and configure whatever they want. When you get the phone back, all you have to do is put your usual SD Card back in, and voila! you have all your stuff just the way it was (Thanks to @teemoo for the tip!)
Trying a new ROM? Make sure you do not botch up your data! Just remove the SD Card you usually use and place one for testing. You can always mod the initrd.gz of your new ROM, flash the boot image or place the initrd,gz in /boot and replace your usual SD Card when you want all your apps, data and settings!
A Note on Cache
As many may remember (and some have pointed out), I had the initial trial with 8 MB of cache for SD Card interface. Over a period of time, I tried various sizes from 512 KB to 16 MB and found out that the cache size is dependant on the phone AND the SD Card that is in it. This experiment involves:
Setting a cache size in the extprep script
Booting from the boot.img using fastboot boot command
Waiting for my phone to connect to Google servers
Opening Root Explorer and confirming the cache size
Running SD Tools, testing the SD Card Read/ Write speeds thrice in a row
Changing the cache size in extprep script, recreating a boot,img, and starting from fastboot boot...
And here are my test results:
As you can see, the higher the cache, higher the difference between the Minimum and Maximum values for Reads. While this test does not consider ALL aspects (like random reads), this gives a good idea of what is the cache size that is the best for my phone and my SD Card. Note that I have two HD2 with 2 different brand/ class of SD Cards, and bot gave pretty different results. You may have to find the right cache size for your phone! Once you got the right cache, even a Class 2 card (the stock Sandisk 16 GB Class 2 that comes with the TMoUS HD2) performa pretty well - no deal-breaking lags even in games like Temple Run or Ninjump.
Also, you should be worried more about read speeds - that is what the phone does most of the time. Write speeds comes into picture mostly when you are installing something. All writes that happen after that are mostly incremental, and never something a major as what happens when you install an app.
Note to ROM Makers on ClockWorkMod Updater Script
While one of the benefits of this mod is that you can set a huge /system partition and forget trimming down anything, some ROMs mounts /data during CWM install to copy certain apps or parts of /system to the /data partition. For such a setup to work well with this mod, the /data partition should be mounted to the EXT partition in the SD Card. I am not sure if there is a straightforward mount command that can be used in updater-script to mount an MMC partition. Thanks to Looki75's post, I have made the script simpler...
The code in updater-script...
Code:
package_extract_dir("work", "/tmp");
format("MTD", "system");
format("MTD", "boot");
mount("MTD", "system", "/system");
mount("ext4","/dev/block/mmcblk0p2","/data");
ui_print("Copying files to /system");
package_extract_dir("system", "/system");
...
...
ui_print("Copying files to /data");
package_extract_dir("data", "/data");
FAQ
I will try and compile some sensible Questions from this thread in the FAQ Section. I request all to read the first three posts at least before asking any questions.
Q: I have an EXT2/ EXT3 partition. You are mounting it as EXT4. What gives?
A: Mounting as EXT4 is backwards compatible with EXT2/3
Q: Where are the initrd.gz that you had posted earlier?
A: I have moved them to this post
Q: Will you modify the initrd.gz from the <name of ROM>?
A: I took more than 6 Hours on a Sunday Night to re-do the first three posts, and give a step-by-step guide. Do you still want me to modify the initrd.gz for you?!! I might post the initrd.gz of ROMs I use or try from time to time, but please don't post requests for modding <name of your ROM>'s initrd.gz. What is that saying about giving a man a fish vs. teaching how to fish...??!
Q: Is ClockWorkMod or 4EXT or TWRP compatible with this mod?
A: Before I answer, note that almost all Recovery tools available for HD2 will mount the SD Card's EXT partition to the sd-ext directory. After doing this mod, /data (in Android) = /sd-ext (in Recovery)
Any backup that includes the sd-ext partition will backup your /data.
At least CWM based recovery will delete dalvik-cache from NAND's data and /sd-ext. After this mod, /data/dalvik-cache (Android) = sd-ext/dalvik-cache (Recovery), so yes deleting Dalvik Cache works
CWN Recovery's Fix Permissions runs in both internal data and sd-ext, so yes that works too
Q: Will installing <name of script/ mod for ROM>, which involves flashing something in Recovery, work after this mod?
A: If whatever you are flashing is limited to modifications in /system, no problems - it will work.
If what you are flashing involves changing or adding content to any part of /data then it will probably not. The reason is when you mount data in Recovery, you will by default mount the internal NAND. After this method, the internal NAND is untouched. You must either modify the updater-script (See Note to ROM Makers on ClockWorkMod Updater Script), or use QtADB/ ADB shell to do what the flashing is supposed to do.
Q: I am getting stuck at boot animation/ getting "Encryption Unsuccessful" message when Android boots...
A: Your ROM's init binary may not support the mount... wait option that I am using. There are other variants like wait <device>, and then mount <device>, see if you can find what it is from the source code of your ROM's init binary (init.c). If all else fails, you may have to include a copy of busybox in sbin, point all commands in extprep script to that busybox, and increase the sleep time using /sbin/busybox sleep 25 (that is an example). In any case, you DO NOT HAVE TO WIPE DATA or WIPE ANYTHING AS SUGGESTED BY THE INSTRUCTIONS IN "Encryption Unsuccessful" message
Q: Can I move part of /data from EXT partition to NAND?
A: You don't have to move anything - that is the beauty of this mod. If, for example, you want dalvik-cache to be in NAND, all you have to do is create a directory, mount NAND to that directory, and symlink /data/dalvik-cache to that directory. Example: In init.rc, make sure /data/dalvik-cache is NOT getting created (comment that line out with a #)
Code:
mkdir /dalvik 0771 system system
mount yaffs2 [email protected] /dalvik nodev nosuid noatime nodiratime
symlink /dalvik /data/dalvik-cache
Q: How do I improve performance?
SD Card interface by design cannot handle multiple read/ write activities simultaneously. An example: Put the SD Card in a card reader attached to your computer. Copy a ~500MB file to it, see what write speeds your get (Win 7 shows an approx value). Now, while the first file is still being copied, copy another similar sized file - what happens to the write speed? It crawls, right?
When you have DataOnEXT, the SD Card is continuously being read from and written to because all your apps, their data, system data and configuration, etc. resides in the EXT partition. You SHOULD NOT expect the same speeds like a full-NAND setup. That said, there a few things you can do to improve performance:
Get a performance SD Card like SanDisk Ultra® microSDXC™UHS-I card
ODEX your ROM
See the previous question's answer for moving dalvik cache to NAND
Increase the NAND's read ahead cache from 4KB to 128 ot 256KB (in init.htcleo.rc)
Set your IO Scheduler to Deadline (use No frills CPU Control)
Q: My ROM slows to a crawl after installing this mod when I install or remove an app...
A: That is normal behavior, let it be for a min or two and it will get back to the usual speeds. This is because installing or removing an app involves creating the DEX file in the dalvik cache, extracting the components (lib files, config files, etc.) for the app and placing them in appropriate locations in /data and so on. This will slow down the system responsiveness because all of these are in the EXT partition, and the SD Card interface is a serial interface that will slow down with multiple simultaneous read/ write requests. However, doing what I have said for the previous question will improve performance quite a bit
FAQ is still WIP, I will keep adding to this section as and when...

ph03n!x said:
Devs - Would be great if you can help me with a way to reliably mount the ext partition to /data in init.rc!!!
Click to expand...
Click to collapse
The problem is with the slow sd cards, Try something of this sort.
Code:
mount ....
while [ $? -ne 0]
do
echo "Waiting for slow sd card!"
sleep 5
mount ....
done
You might have to check a2sd script since I'm not sure what is the success test case for mount, most unix programs return zero so i've based it on that assumption.

Rick_1995 said:
The problem is with the slow sd cards, Try something of this sort.
Code:
mount ....
while [ $? -ne 0]
do
echo "Waiting for slow sd card!"
sleep 5
mount ....
done
You might have to check a2sd script since I'm not sure what is the success test case for mount, most unix programs return zero so i've based it on that assumption.
Click to expand...
Click to collapse
I tried a sleep command before the part where I mount the ext partition to /data, but that doesn't seem to work. I am still figuring out the script language used in Android's init.rc, including a if loop or a whole loop.
Looks like I have to create a service that calls an external script- at least that is how far I have come with my searching
Swyped from my HTC HD2 using xda premium

ph03n!x said:
Space - Obvisiouly. The 1GB/ 2GB/ 4GB sd-ext partition will be mounted as external memory
Click to expand...
Click to collapse
Think you mean internal here, I take it internal space is still used as cache (have an unanswered question in one of Xylo's threads as to why sdcard isn't mounted as cache).
Could you post just the init.rc file to see what modifications have been made?
In terms of loop, while trying to get a squashed system up and running (last squashed rom for HD2 was on gingerbread), the squashed files mounted fine (but couldn't get the system to fully boot, probably a libs issue), the mount command used in init.rc were:
Code:
mount squashfs [email protected]/system/fonts.sfs /system/fonts ro
placed after "on fs".
So modifying for this:
Code:
mount ext4 [email protected]/dev/block/mmcblk0p2 /data rw
, failing that you may need to mount it first as say /mnt/ext then loop.
The issue with the ext mount scripts that I've found (at least with link2sd) is that there is a delay in being granted superuser permissions, using init.rc should overcome that issue.

HypoTurtle said:
Think you mean internal here, I take it internal space is still used as cache (have an unanswered question in one of Xylo's threads as to why sdcard isn't mounted as cache).
Could you post just the init.rc file to see what modifications have been made?
In terms of loop, while trying to get a squashed system up and running (last squashed rom for HD2 was on gingerbread), the squashed files mounted fine (but couldn't get the system to fully boot, probably a libs issue), the mount command used in init.rc were:
Code:
mount squashfs [email protected]/system/fonts.sfs /system/fonts ro
placed after "on fs".
So modifying for this:
Code:
mount ext4 [email protected]/dev/block/mmcblk0p2 /data rw
, failing that you may need to mount it first as say /mnt/ext then loop.
The issue with the ext mount scripts that I've found (at least with link2sd) is that there is a delay in being granted superuser permissions, using init.rc should overcome that issue.
Click to expand...
Click to collapse
I meant internal indeed - corrected it
SD Card as Cache - Not sure if I checked back on the question, but I do remember the discussion. In most recent ROMs, /cache is a part of /data - this is to make space for large apps from the market that may otherwise be limited to the size of the cache partition. Instead of /data, we can have any other writable partition - SD Card or even SD-EXT - but symlinking it to /data seems hassle free and does not require anything more. Linking to SD Card may mean that the SD Card has to always be in the phone, and it should be mounted soon enough.
I haven't checked the loop part you have given - let me do some reading about it (or you can try it and let us know!). I will driving for the next several hours, will post the init.rc later today/ tomorrow...

HypoTurtle said:
Think you mean internal here, I take it internal space is still used as cache (have an unanswered question in one of Xylo's threads as to why sdcard isn't mounted as cache).
Could you post just the init.rc file to see what modifications have been made?
In terms of loop, while trying to get a squashed system up and running (last squashed rom for HD2 was on gingerbread), the squashed files mounted fine (but couldn't get the system to fully boot, probably a libs issue), the mount command used in init.rc were:
Code:
mount squashfs [email protected]/system/fonts.sfs /system/fonts ro
placed after "on fs".
So modifying for this:
Code:
mount ext4 [email protected]/dev/block/mmcblk0p2 /data rw
, failing that you may need to mount it first as say /mnt/ext then loop.
The issue with the ext mount scripts that I've found (at least with link2sd) is that there is a delay in being granted superuser permissions, using init.rc should overcome that issue.
Click to expand...
Click to collapse
ph03n!x said:
I meant internal indeed - corrected it
SD Card as Cache - Not sure if I checked back on the question, but I do remember the discussion. In most recent ROMs, /cache is a part of /data - this is to make space for large apps from the market that may otherwise be limited to the size of the cache partition. Instead of /data, we can have any other writable partition - SD Card or even SD-EXT - but symlinking it to /data seems hassle free and does not require anything more. Linking to SD Card may mean that the SD Card has to always be in the phone, and it should be mounted soon enough.
I haven't checked the loop part you have given - let me do some reading about it (or you can try it and let us know!). I will driving for the next several hours, will post the init.rc later today/ tomorrow...
Click to expand...
Click to collapse
Alright the mount loop command you mentioned and the looping I was discussing with Rick are different. The mount loop command mounts a file (eg: a .iso image) as a device.
The loop I was looking to create is a logical if... else or a while... do loop that will check if /dev/block/mmcblk0p2 is available, else will halt the boot process until it becomes available. The challenge (for me) its that the scripting language used in init.rc its not like the scripts we create for init.d
I am still doing some reading up...
Swyped from my HTC HD2 using XDA Premium

Will this work??
Starting your own service at boot.
...If you have a reason to add something or just what to try things out however it is relatively straight forward to add a native service to that init sequence. I have created a simple example that writes the time elapsed since it started to the log. It wakes up every three seconds. The code for exampleservice.c looks like:
Code:
#define LOG_TAG "Example Service"
#include < utils/log.h >
#include < unistd.h >
int main(int argc, char **argv)
{
LOGI("Service started");
int elapsed = 0;
while(1)
{
sleep(3);
elapsed += 3;
LOGI("Service elapsed time is %d", elapsed);
}
}
Place this somewhere in the platform build system and build as an executable. The build system will place the output in the /system/bin folder on the device. Now all that is needed is to add the following to the init.rc script:
Code:
service exampleservice /system/bin/exampleservice
user exampleservice
group exampleservice
oneshot
and your service will start on init. It is also possible to write your own file using the Android init language that enables your services and variables. Then just add a line to import the file in init.rc and you are done.
Source
Click to expand...
Click to collapse
Will this method work to pause the boot process until /dev/block/mmcblk0p2 becomes available? I do not have a dev environment setup - all I have is Cygwin that I use to edit boot.img, port some ROMs to test etc. Can someone help me create such a binary please? Again, I am good at logic and bad at writing/ compiling stuff
Alternatively, can cLK be made to wait until /dev/block/mmcblk0p2 is available? Thoughts?

What is the difference to this methods:
http://forum.xda-developers.com/showthread.php?t=1716124
Are you sure we need more I/O performance with sequencial r/w? Isn't the task with multitasking sutuations to have more perfomance with random r/w? Sdcards won't give that much improvement then: http://www.tomshardware.com/reviews/microsdhc-memory-card-performance,3011-12.html

ReinerK said:
What is the difference to this methods:
http://forum.xda-developers.com/showthread.php?t=1716124
Are you sure we need more I/O performance with sequencial r/w? Isn't the task with multitasking sutuations to have more perfomance with random r/w? Sdcards won't give that much improvement then: http://www.tomshardware.com/reviews/microsdhc-memory-card-performance,3011-12.html
Click to expand...
Click to collapse
In the CronMod as well as all A2SD methods, the Linux boot init process will mount /data to the internal NAND partition (userdata). During Android boot, /data or a part of /data is remounted or symlinked to the SD-EXT partition. This method has its own set of issues, both known and unpredictable. Read up the ROM threads with A2SD or similar stuff in HD2 Android NAND forum and HD2 Android General forum and you will know. This is a trial and error method which is a hit or a miss.
What I am trying to achieve is to have the Linux boot init process mount /data directly to the EXT partition in the SD Card, making this transparent to Android. As far as Android is concerned, it will see a /data partition like it sees a NAND /data partition when you do not use any of these scripts. With this method, there is no miss that I have experienced so far in my testing, except not being able to get the SD Card device ready in time for the Linux boot init process to mount it as /data. Once that is fixed, am sure many will see the benefits.
While the benchmark you have linked to gives a comparison of random and sequential transfer rates of Flash Memory from 9 months ago (it does not even have all that many decent class6 cards that are available now), have you find anything on the transfer rates of NAND? While I remember a HD2 user benchmarking NAND transfer rates, I do not remember the exact values but do remember it was not good. From my personal opinion, the same ROM felt faster with this modification - note that after the first boot all the apps (system or user) that you see and use will be loaded from dalvik-cache which is located in /data. All app data and databases are read/ written in the /data partition. Hence the responsiveness of the phone will be directly proportional on how fast the data partition is - in my case it is my class6 SD Card's EXT partition.
There is also the issue with bad block NAND making several flashaholics' phones unusable or unstable. EXT2/3/4 partitions have better data consistency management and also have e2fsck - it would not be without a reason that Google moved to EXT4 NAND format for their recent phones
Even if you have an International HD2 with 512 MB NAND, with this method you can use almost all of that space (except spaces reserved for bootloader, recovery, misc, etc.) for /system partition which will definitely make the phone live a lot longer even with bad blocks, what with recent cLK versions letting you manipulate partition layouts.
I can keep going on the benefits of having EXT partitions and the benefits of this method, but that would beat the purpose of this thread. Let's see if we can get EXT mounted during boot to /data reliably and consistently. Whether anyone wants to use that method is, of course, their choice
By the way, have anyone used the test ROMs? Any feedback?

I think yaffs file system is used by HTC only, other droid phones already using EXT file system on NAND.
Thats why some phones has good I/O benchmark
Even if it was possible to use EXT4 on HTC HD2 nand would be big improvment

ph03n!x said:
...This is a trial and error method which is a hit or a miss.
Click to expand...
Click to collapse
That's true. Sine even tytung Roms are bigger than 150MB I used 40a2sdx, and I noticed performance problems and sometimes low sound bug. Well I can live with this, but without of cource would be better
ph03n!x said:
While the benchmark you have linked to gives a comparison of random and sequential transfer rates of Flash Memory from 9 months ago
Click to expand...
Click to collapse
I am sorry, I did not found any newer tests in english language. But I think 9 month old test are okay, cause most people use their µSDs several years (my 2009 SanDisk 16GB one just died ).
ph03n!x said:
There is also the issue with bad block NAND making several flashaholics' phones unusable or unstable
Click to expand...
Click to collapse
They should just stop doin' task29 whenever they only wanna flash a rom or change the partition layout.
ph03n!x said:
I can keep going on the benefits of having EXT partitions and the benefits of this method, but that would beat the purpose of this thread. Let's see if we can get EXT mounted during boot to /data reliably and consistently. Whether anyone wants to use that method is, of course, their choice
Click to expand...
Click to collapse
I am pleased to hear that you wanna find a way that way. I just don't have an extra phone to test your rom atm.
Anyway, thaks a lot for your explanations!

ph03n!x said:
In the CronMod as well as all A2SD methods, the Linux boot init process will mount /data to the internal NAND partition (userdata). During Android boot, /data or a part of /data is remounted or symlinked to the SD-EXT partition. This method has its own set of issues, both known and unpredictable. Read up the ROM threads with A2SD or similar stuff in HD2 Android NAND forum and HD2 Android General forum and you will know. This is a trial and error method which is a hit or a miss.
Click to expand...
Click to collapse
Reason I believe it is hit or miss is because during boot init.d scripts in most of the roms runs in parallel. hence while scripts is trying to re-mount/re-link the data partition Android boot-up continues and causes problem. if we pause the android bootup while scripts finishes its job of setting up links correctly I think problem should go away. take a look at this
Code:
# Execute files in /system/etc/init.d before booting
# service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
# class main
# disabled
# oneshot
if we change that to
Code:
exec /system/bin/sysinit
problem with A2SD scripts should be solved of-course you will have to modify any scripts which sits in infinite loop.
take a look at my latest JB AOSP roms or miui ICS roms.
-----Update----
what if we leave both the method in there
service method to run init.d scripts
and
exec method to pause the boot-up till sd-card is mounted and sd-ext is available.
lets says
make sysinit-1 which will execute the script from init.d1 directory which will have script to check the sd-ext availability

I am close to a solution - looks like a few other devices have already mounted EXT partitions in the SD Card to /system or /data. Here is the command:
Code:
devwait /dev/block/mmcblk0p2
mount ext2 /dev/block/mmcblk0p2 /data nodev nosuid noatime nodiratime
(Check this thread).
But the problem is it is still not mounting. Does this need anything in the kernel/ init? Even the batter-pull technique is not working! The phone is booting as if it is a fresh installation, though I do not see any mounted /data partition
The other option from the same thread is to have
Code:
pause (5);
in init.c and compile is at a binary.
Another bit of information I have come across:
Code:
on emmc-fs
# mount mmc partitions
wait /dev/block/mmcblk0p13
exec /system/bin/e2fsck -p /dev/block/mmcblk0p13
mount ext4 /dev/block/mmcblk0p13 /data nosuid nodev barrier=1 noauto_da_alloc,noinit_itable,nodelalloc
(from here).
With this, the phone is going back to the Encryption Unsuccessful mode.
Pretty sleepy already, gonna call it a day for now - my poor phone has undergone a bunch of boots and reboots for a day
smokin901 said:
Reason I believe it is hit or miss is because during boot init.d scripts in most of the roms runs in parallel. hence while scripts is trying to re-mount/re-link the data partition Android boot-up continues and causes problem. if we pause the android bootup while scripts finishes its job of setting up links correctly I think problem should go away. take a look at this
Code:
# Execute files in /system/etc/init.d before booting
# service sysinit /system/bin/logwrapper /system/xbin/busybox run-parts /system/etc/init.d
# class main
# disabled
# oneshot
if we change that to
Code:
exec /system/bin/sysinit
problem with A2SD scripts should be solved of-course you will have to modify any scripts which sits in infinite loop.
take a look at my latest JB AOSP roms or miui ICS roms.
Click to expand...
Click to collapse
Thanks, I will check your ROM. I would still like to get /data to sd-ext working before Android boots though I thought I was close today, but unfortunately no!

Looks like there had been some progress to this cause, thanks to @securecrt! Check this post.
Swyped from my HTC HD2 using XDA Premium

ph03n!x said:
Mounting - /dev/block/mmcblk0p2 is not getting mounted to /data at every boot/ reboot reliably. This results is the phone not booting at all (Gingerbread) or giving an Encryption Failed, wipe data prompt (This is a feature of ICS/ JB, if /data is not accessible, the OS will boot with a temporary /data file system to show this error).
I have not been able to find a way to reliably carry out this mount - my best guess is that the SD Card Reader interface is not getting ready in time to be mounted to /data. I do not know how to make the boot process wait until the device is available.
ClockWorkMod/ Other recoveries - As the recovery boot images are still mounting userdata to /data and the ext partition to sd-ext, you will have to access sd-ext to access your data. What this means is that if you are moving ROMs, a direct CWM backup restore won't work unless the new ROM also has this modification
Performance- is only as good or bad as your SD Card. My second HD2 has a class 2 SD Card, and I do not find any performance difference. While this is not bad, the SD Card I am talking about is a decent SanDisk card. If you have something with poor transfer rates, performance will suffer
SD Card cannot be removed from the system while Android is running!!!
Click to expand...
Click to collapse
This is, obviously, not compatible with other setups, such as those using some type of ad2sd script (i.e. Amarulls), correct?
CWM Recovery backup should still work since it does backup sd-ext, no?
I need another sd card to play..

Ok, I need some help-
securecrt said:
the trick is:
1. rename the init to init.android
2. create a script named init, mount the system/data in this script, you can add a few sleep time in this to confirm the mount is alreay done and then execut init.android
3. disable the system/data mount in init.rc
Click to expand...
Click to collapse
Ever since @securecrt posted this, I have been running in circles. Here is what I have done:
Renamed init to init.android
Commented out in init.rc:
Code:
#mkdir /data 0771 system system
Commented out in init.rc:
Code:
#mount ext4 /dev/block/mmcblk0p2 /data nosuid nodev noatime nodiratime
Created a script named init with
Code:
#!/sbin/busybox sh
export PATH=/sbin
sleep 10
mkdir /dev
mkdir /dev/block
mknod /dev/block/mmcblk0p2 b 179 2
mkdir /data 0771 system system
mount ext4 /dev/block/mmcblk0p2 /data nosuid nodev noatime nodiratime
/init.android
Copied busybox binary to /sbin/busybox
Created the initrd.gz and flashed
The phone is booting to second boot (logo.rle loads), and then reboots.
Like I've said I have very limited Linux/ coding skills. Would be great if someone can nudge me in the right direction!

ny_limited said:
This is, obviously, not compatible with other setups, such as those using some type of ad2sd script (i.e. Amarulls), correct?
CWM Recovery backup should still work since it does backup sd-ext, no?
Click to expand...
Click to collapse
Yes, you need to remove all variants of a2sd/ link2sd scripts.
CWM Recovery will back up SD-EXT as /sd-ext, but Android will load it as /data after this mod. So if you are going to try this mod, you need to titanium backup all you system/ user app+data, install the modified mod or initrd.gz, make sure you have a ext partition, boot to Android and restore the backup from titanium. And the exact same if you are removing the mod (in which case it will be original initrd.gz).
I can sense that I am pretty close to getting this to work reliably, except for being a dunce in Linux/ Scripting. With little help this mod is a go for daily use

ph03n!x said:
Ok, I need some help-Ever since @securecrt posted this, I have been running in circles. Here is what I have done:
Renamed init to init.android
Commented out in init.rc:
Code:
#mkdir /data 0771 system system
Commented out in init.rc:
Code:
#mount ext4 /dev/block/mmcblk0p2 /data nosuid nodev noatime nodiratime
Created a script named init with
Code:
#!/sbin/busybox sh
export PATH=/sbin
sleep 10
mkdir /dev
mkdir /dev/block
mknod /dev/block/mmcblk0p2 b 179 2
mkdir /data 0771 system system
mount ext4 /dev/block/mmcblk0p2 /data nosuid nodev noatime nodiratime
/init.android
Copied busybox binary to /sbin/busybox
Created the initrd.gz and flashed
The phone is booting to second boot (logo.rle loads), and then reboots.
Like I've said I have very limited Linux/ coding skills. Would be great if someone can nudge me in the right direction!
Click to expand...
Click to collapse
I am sure securecrt will reveal his secret soon, m8.. I wouldn't 'waste' my time on it since he is already running it and knows how to do it
Maybe you can send him a PM if the wait is killing you ?

[How-to] Using an ext4 formated SD card.

Update: I've since made a flashable zip that automatically creates a modified sdcard1 binary and extracts an init.d script to handle it all. Will make a thread in a more general location as this could be used on many TouchWiz devices. Link.
Hello everyone,
The mailman brought me a new 64GB microSD card this morning, and I wanted to try formatting it in ext4 instead of exFAT. Both for the heck of it and in case I wanted to give AOSP ROMs a try down the road.
The usual caveats apply.
Required:
init.d support
a mounting script
a mounting updater-script for custom recoveries.
You can get init.d support with the stock kernel on many devices by having the run-parts command launch from a custom install-recovery.sh script. See the following thread for files and a how-to:
[MOD]Term-init & Zip-init: Enable Init.d for Any Phones w/o Need of Custom Kernels!!!
SD card removal:
Should you need to remove the card it can be unmounted and safely removed from the storage settings as usual. Mounting it again requires either a reboot or manually executing the mount command and then activating the card in the storage settings.
Mounting script:
Make sure you have proper line endings, file name (e.g. 95mountsdext4) and permissions set.
Code:
#!/system/bin/sh
# Mount SD Card Ext4 Script
mount -rw -t ext4 /dev/block/mmcblk1p1 /storage/extSdCard
Mounting in CWM/TWRP:
The other piece in this is the attached zip file, which simply runs the appropriate mount command for Clockworkmod Recovery. Unmount as usual. This way you can also store nandroid backups and other update zips on the external as well.
Technical considerations:
The mounting occurs early enough during the boot process that the media scanner and MTP services have no issues with this.
There may be are some permissions related glitches to look out for, but it hasn't been an issue for me so far. (One possible fix would be a recursive chmod/chown added to the mounting script.)
Update: The camera app saves the photos properly to the SD card, but leaves them with improper permissions which prevent subsequent viewing or editing again until you chmod the files. To be continued...
If your init.d support comes from the install-recovery.sh trick, CWM will prompt to delete the script before reboot. Don't.
If the mounting script doesn't run for some reason, or you try to activate the card before having mounted it manually, the phone will give an error and ask if you want to format the card. Don't.
Enjoy,
Darkshado

I have been looking for a way to do this for a long time for numerous reasons (symlinks, >4GB file size, linux-only environment, etc.). I'll be giving this a try very soon.
Thanks for sharing!
EDIT: Just wanted to add that I think it's ridiculous Android doesn't support this natively.

The permissions issues are frustrating. I can take photos and store them on the card, but the umask for JB has been set as 077, in other words, rwx------ permissions, and ownership by the application's user.
I tried different arguments for the mount command to try and force permissions and ownership one way or another with no luck so far. Ironically, an NTFS formatted card might work better in this respect.
A similar mod had been made on the Nexus S and one of the posters resorted to an apk that regularly ran chmod -R 0777 on new files, I tried using it but it just hung there and did nothing on the Note II.
Another possibility would be using FUSE, although I'm not sure how to go about doing this yet.
Also, I pondered the possibility of using UDF instead of ext4, it is a standardized format and just about every major OS out there supports it too...

Any updates? Is it working already or...?

Despite all the good of Android, Google/carriers, whoever, not including ext2/3/4 support natively is just a slap in the face. Good to see someone working to right a wrong that subjugating software has done.

You should NOT be doing this. The Android hardware requirements clearly state that all shared storage directories must be case insensitive and must not have permissions. FAT32 is the only supported filesystem which meets these requirements. Mounting an EXT filesystem directly will break applications.
The newer versions of Android come with an "sdcard" utility which uses a FUSE driver to wrap a native EXT filesystem and exposes a pseudo filesystem which is case insensitive and is without permissions. You should mount the EXT SD card at a different location (/dev/fuse) and use the "sdcard" utility to emulate it at /storage/whatever. You can see the command line syntax of the "sdcard" utility in the source code.
CM10.1 does this automatically. https://github.com/CyanogenMod/android_system_core/tree/cm-10.1/sdcard

KurianOfBorg said:
You should NOT be doing this. The Android hardware requirements clearly state that all shared storage directories must be case insensitive and must not have permissions. FAT32 is the only supported filesystem which meets these requirements. Mounting an EXT filesystem directly will break applications.
The newer versions of Android come with an "sdcard" utility which uses a FUSE driver to wrap a native EXT filesystem and exposes a pseudo filesystem which is case insensitive and is without permissions. You should mount the EXT SD card at a different location (/dev/fuse) and use the "sdcard" utility to emulate it at /storage/whatever. You can see the command line syntax of the "sdcard" utility in the source code.
CM10.1 does this automatically. https://github.com/CyanogenMod/android_system_core/tree/cm-10.1/sdcard
Click to expand...
Click to collapse
Again, Android not natively supporting ext4 is a slap in the face. Usability over technical merit disgusts me.

muqali said:
Again, Android not natively supporting ext4 is a slap in the face. Usability over technical merit disgusts me.
Click to expand...
Click to collapse
It does support EXT4! Officially. All Google ROMs and AOSP can mount EXT4 partitions as /storage/*. The correct way to mount it is to use the command "sdcard" not "mount". I'm pretty sure any AOSP ROM will automatically mount an EXT4 SD card using the "sdcard" command just like Cyanogenmod does.

Thanks for the info. I'll look into this soon-ish, once my exams are over.
Sent from my SGH-T889V using xda app-developers app

KurianOfBorg said:
It does support EXT4! Officially. All Google ROMs and AOSP can mount EXT4 partitions as /storage/*. The correct way to mount it is to use the command "sdcard" not "mount". I'm pretty sure any AOSP ROM will automatically mount an EXT4 SD card using the "sdcard" command just like Cyanogenmod does.
Click to expand...
Click to collapse
It's still a second class citizen to a xFATx filesystem.

muqali said:
It's still a second class citizen to a xFATx filesystem.
Click to expand...
Click to collapse
No it's fully supported by AOSP exactly the same as FAT on AOSP and exFAT/NTFS on Samsung ROMs. It's the manufacturer's fault for REMOVING support from their ROM. When you insert an EXT SD card on AOSP, it gets mounted at /storage/* just like any other SD card.

In my N7100 with CM 10.1, ext4 has stopped working for my 32gb SDCard on 05-01-2013 nightly, even after reformatting, going back to stock, then reinstalling CM 10.1. I also noticed that my ext4 formatted 8GB SdCard still works, however, so I am not sure if it's a storage size issue in my case (32gb vs 8gb). I am trying a hybrid of 8mb fat32 / 28.*gb ext4 to see if that will work.
KurianOfBorg said:
No it's fully supported by AOSP exactly the same as FAT on AOSP and exFAT/NTFS on Samsung ROMs. It's the manufacturer's fault for REMOVING support from their ROM. When you insert an EXT SD card on AOSP, it gets mounted at /storage/* just like any other SD card.
Click to expand...
Click to collapse

clearday said:
In my N7100 with CM 10.1, ext4 has stopped working for my 32gb SDCard on 05-01-2013 nightly, even after reformatting, going back to stock, then reinstalling CM 10.1. I also noticed that my ext4 formatted 8GB SdCard still works, however, so I am not sure if it's a storage size issue in my case (32gb vs 8gb). I am trying a hybrid of 8mb fat32 / 28.*gb ext4 to see if that will work.
Click to expand...
Click to collapse
Is it formatted properly as ext4? Using mke2fs or (tune2fs to convert to ext4). All ROMs only mount the first partition on the SD card regardless of the file system. Sometime after mounting USB Mass Storage an the SD card doesn't remount properly so you need to reboot the device. You'll most probably want to use MTP with ext4 anyway.

KurianOfBorg said:
Is it formatted properly as ext4? Using mke2fs or (tune2fs to convert to ext4). All ROMs only mount the first partition on the SD card regardless of the file system. Sometime after mounting USB Mass Storage an the SD card doesn't remount properly so you need to reboot the device. You'll most probably want to use MTP with ext4 anyway.
Click to expand...
Click to collapse
Finally fixed the problem by running this command in ROM Toolbox Lite:
"find /storage/sdcard1/ -print0 | xargs -0 chown root:media_rw"
http://forum.xda-developers.com/showthread.php?p=38182488#post38182488

clearday said:
Finally fixed the problem by running this command in ROM Toolbox Lite:
"find /storage/sdcard1/ -print0 | xargs -0 chown root:media_rw"
http://forum.xda-developers.com/showthread.php?p=38182488#post38182488
Click to expand...
Click to collapse
Then it's not mounted properly! Your ext4 SD card has directly been mounted at /storage/* instead of through the FUSE driver. You should NOT be able to see permissions when it's mounted at /storage/*. The physical partition should be mounted at /dev/fuse. Reboot the device and check again whether permissions are visible at /storage/*.

KurianOfBorg said:
Then it's not mounted properly! Your ext4 SD card has directly been mounted at /storage/* instead of through the FUSE driver. You should NOT be able to see permissions when it's mounted at /storage/*. The physical partition should be mounted at /dev/fuse. Reboot the device and check again whether permissions are visible at /storage/*.
Click to expand...
Click to collapse
It's still visible at storage
How do I fix it?

clearday said:
It's still visible at storage
How do I fix it?
Click to expand...
Click to collapse
It should show up at /storege/* but that should be the FUSE driver's mount point with permissions stripped away. The real ext4 partition will be at /dev/fuse.

Any further progress?
I want to use symlinks and ext4 on my note 2 also.

On aosp roms just use the sdcard binary with an initd script.
Gesendet von meinem GT-N7105 mit Tapatalk 2

DerTeufel1980 said:
On aosp roms just use the sdcard binary with an initd script.
Click to expand...
Click to collapse
I'm trying to do this on Tweaked. There is an sdcard binary, however, it appears to be modified by Samsung as it's hardcoded to mount to /storage/sdcard0 and overrides the internal sdcard mount when I use it. It doesn't take a destination parameter like the AOSP/CM version does.
If anyone has an AOSP/CM build environment, could I trouble you for a statically linked version of the sdcard binary? I downloaded CM10.2-nightly, but it's dynamically linked and, of course, doesn't work on the stock based ROMs.
EDIT
It might still be nice, but I figured out a way around it. I hex edited the sdcard binary from the Note2 to use /storage/sdcard1. Then in the mount script, bind mounted it over to /storage/extSdCard. I've rebooted a few times and it seems to be working fine. I am copying data to it over MTP right now. I've attached a zip of the files I'm using.
NOTE: THIS IS NOT A FLASHABLE ZIP.
I might make one later, but this kind of needs to be a manual process anyway.
put the sdcard1 file in /system/xbin
chmod 755 /system/xbin/sdcard1
put the script file in /etc/init.d
set permissions/ownership on it
Now, if you have an ext4 formatted SD, and it's not mounted, you should be able to run the script and have it mount it, run the sdcard1 binary on it, and bind mount it over to the normal extSdCard spot. It will happen at boot if you got it all right.
There are probably improvements that can be made, my shell scripting is a bit rusty. Hopefully this will get people interested in it again, now that the permissions issues are resolved.

[Q] Link2sd problem

I've just installed a new ROM (custom cm7) and when I try to select the partition, it gives me this error:
"Mounting script error
Mount script cannot be created;
Code:
mount:mounting /dev/block/vold/179:2 on /data/sdext2 failed: Invalid argument
"

I had same problem, when doing a factory reset with cwm it formats sd-ext too.
I don't remember exactly but i think it formats it to ext-3.
So connect your sd to your pc and format to whatever you want.
Sent from my GT-S5660 using xda app-developers app

afonsus1997 said:
I've just installed a new ROM (custom cm7) and when I try to select the partition, it gives me this error:
"Mounting script error
Mount script cannot be created;
Code:
mount:mounting /dev/block/vold/179:2 on /data/sdext2 failed: Invalid argument
"
Click to expand...
Click to collapse
Some roms just dont work with symbolic links, no matter how you try to mount the ext, with hacks, scripts, w/e.. i learned to give up in such cases and look for alternatives, i could not get it to work not even with hacks and stuff, it might be related to specific kernel build..for instance, my current 7.2 rom in no way works with link2sd, app2sd, etc, but i got it to easily work with s2e (simple2ext) with a standard ext2 partition.. this program does not offer per-app basis control, but you can move to sd any of the: app folder, app data folder, dalvik folder, download cache folder..you can move to sd all of them or just the ones you want.. for instance, i moved to sd dalvik (90 mb), app folder (108 mb) but left in phone memory the app data folder which is in my case 78 mb, because that app data folder seems to have more influence on the performance than theapp folder, hence i prefer it on phone memory
as i said, s2e does not offer per-app control but rather per-folder, but it gets the job done.. "invalid argument" error was for me a dead end, but maybe you can get lucky

Its because your SD-EXT is not Ext-4
Try do it with phiex recovery, has the option to create a ext-4 or in your pc with magic partition

I've read a few posts about this, and it seems you need to format the partition to ext4. I guess the other options are for if you want extra partitions.
My phone is running cm-10.1-20130111-UNOFFICIAL-gio and gapps-jb-20121212-signed, and there was no problems with using link2sd.

alloydog said:
I've read a few posts about this, and it seems you need to format the partition to ext4. I guess the other options are for if you want extra partitions.
My phone is running cm-10.1-20130111-UNOFFICIAL-gio and gapps-jb-20121212-signed, and there was no problems with using link2sd.
Click to expand...
Click to collapse
Not really, it just gives you the option to choose what filesystem you want to use.
They all have their own advantages.
I believe it is either ext-2 or ext-3 that has the best speed, while ext-4 has a protection against corrupted files.
But if link2sd asks you what filesystem your using,
and you tell it you have ext-2 while you have ext-4, it wont work because it has to create another mount script for that filesystem.
So the problem here is either a rom that doesnt support these kinds of links or you chose the wrong filesystem (or you have no 2th partition at all).
Sent from my GT-S5660 using xda app-developers app

Did you partition with cwm? Than it's EXT4
Sent from my GT-S5660 using xda app-developers app

[Q] Moving apps to SD card android 4.3->

So what I have gathered is that this phone even with root/cmod/titanium backup doesn't allow me to move apps to my _real_ sdcard. So is it really phone related or is there a way to do it with custom rom/kernel or some other way?

leripe said:
So what I have gathered is that this phone even with root/cmod/titanium backup doesn't allow me to move apps to my _real_ sdcard. So is it really phone related or is there a way to do it with custom rom/kernel or some other way?
Click to expand...
Click to collapse
on stock android 4.2 u could actually use app2sd to move some apps to external storage
using Cyanogenmode 4.3 based Carbon MOD i found that i no longer can do that, tried app2sd and link2sd
i read somewhere that external storage is defined in system PATH variables, dont know how relevant that is but seems connected
but i honestly dont know yet much about the android platform to fix this issue myself, so i might be wrong
we need some pro tip help

Would be very interesting to habe feature. Especially for phones with only 8 GB internal flash. Hope this will come for my s4 Mini. Samsung has this implemented in their stock Rom.
Gesendet von meinem GT-I9195 mit Tapatalk

tesme33 said:
Would be very interesting to habe feature. Especially for phones with only 8 GB internal flash. Hope this will come for my s4 Mini. Samsung has this implemented in their stock Rom.
Gesendet von meinem GT-I9195 mit Tapatalk
Click to expand...
Click to collapse
Yes this would be awesome, but seems that cmod has gone moneymaking company and tries to make cmod to google standards which means they have been starting to remove/hiding features. Their goal now is to make installing cmod without cwm and to remove root or have it as optional feature. Or all this is what I gathered over the net, but I still hope some other custom rom could have this feature.
Edit:
All of the above may not be like that nowadays, and this is somewhat speculation since there hasn't(?) been an official statement from cm about app2sd support. Though emulated sdcard may require something different.
(edited 19.2.2014)

Moving apps to external card.
leripe said:
Yes this would be awesome, but seems that cmod has gone moneymaking company and tries to make cmod to google standards which means they have been starting to remove/hiding features. Their goal now is to make installing cmod without cmw and to remove root or have it as optional feature. Or all this is what I gathered over the net, but I still hope some other custom rom could have this feature. This feature may only need one to repartition the sdcard, but I can't get it to mount as mass storage nor with sdcard reader(it shows "empty" card) in windows(maybe i should try it in linux).
Click to expand...
Click to collapse
About two months ago I upgraded my Xoom to JB 4.2.2, and because space was limited, I hadn't noticed whether I could move operating programs to the external card or not. This was a custom rom. Well, I was using a 32 Gig card that was nearly full of data.
This last week, I invested in a 64 Gig sdhc card and upgraded my rom to Kit-Kat 4.4.2. Thus its also a custom rom, but now I find that though, for the most part, I can designate the external card to store and access data from, I can't run programs from it. Hmm!
Here I am with all this memory. Sure wish I had better management options.

Kingsman1 said:
About two months ago I upgraded my Xoom to JB 4.2.2, and because space was limited, I hadn't noticed whether I could move operating programs to the external card or not. This was a custom rom. Well, I was using a 32 Gig card that was nearly full of data.
This last week, I invested in a 64 Gig sdhc card and upgraded my rom to Kit-Kat 4.4.2. Thus its also a custom rom, but now I find that though, for the most part, I can designate the external card to store and access data from, I can't run programs from it. Hmm!
Here I am with all this memory. Sure wish I had better management options.
Click to expand...
Click to collapse
Well check my thread on my signature and the requests section in the 1st post for more info on about app2sd.

Resolve the issue
Hi all,,,
This is my first time in XDA. Someone fixed this bug for me. You need to be rooted to fix this issue. Install from market Terminal Emulator and type the following commands
su
/system/bin/restorecon -R -v /data/media/

dlightx said:
Hi all,,,
This is my first time in XDA. Someone fixed this bug for me. You need to be rooted to fix this issue. Install from market Terminal Emulator and type the following commands
su
/system/bin/restorecon -R -v /data/media/
Click to expand...
Click to collapse
Can I check with you what bug this fixes?
Ability to use app2sd?

I use FolderMount and works real well. No need to partitioning sd card.

I've gotten to getting Link2SD working on the GT-I9195 with nightly 20140402 KitKat.
Based loosely on [Tutorial/HOWTO] Convert Your External SD Card from FAT/exFAT to EXT4! (3 ways!)
1. Clear everything out of your external SD card. We're gonna be formatting it so you'll have to backup your data.
2. Boot up into recovery and have a working ADB environment setup on your computer
3. adb shell (Do NOT mount your /storage/sdcard1)
5. Check that you have fdisk and mke2fs installed (Type fdisk --help and mke2fs --help ensure they don't throw up errors)
6. fdisk /dev/block/mmcblk1
7. Type o and Enter to destroy the partition table
8. Type n to create a new partition. Make sure its Primary (p). Select first partition and choose how many cylinders you want to allocate to it.
9. Type n to create your second partition. Again, make sure its Primary (p). Leave cylinder allocation blank to use remainder of space by default.
10. Verify partition layout by typing p to show partition layout.
11. Exit fdisk and save changes by typing w
12. mke2fs -t ext4 /dev/block/mmcblk1p1
13. mke2fs -t ext4 /dev/block/mmcblk1p2
14. reboot
15. Once CM has booted up, check if your external storage partition 1 has been mounted. It should be mounted at /mnt/media_rw/sdcard1
16. Try creating a folder in /mnt/media_rw/sdcard1 and /storage/sdcard1 to test if your read/write permissions are correct.
17. Install DiskInfo from playstore to check if your second partition is visible
18. Once done, install Link2SD and select ext4 when prompted to ask what kind of filesystem your 2nd partition is.
19. Reboot after Link2SD installs scripts.
20. Voila!
Let me know if there are any issues. I modified several files while doing this so not sure if any of them affected.
Should #16 not work, try:
1. Going to /system/etc/permissions/platform.xml and adding media_rw group to the element that only has sdcard_r group in it.
2. Typing mount in Terminal Emulator (su) or adb shell and see whether your partitions are mounted. If you're not sure, post the output out here.
Final mount output (filtered with mmcblk1 or sdcard stuff):
Code:
/dev/block/mmcblk1p2 /data/sdext2 ext4 rw,seclabel,relatime,data=ordered 0 0
/dev/fuse /mnt/shell/emulated fuse rw,nosuid,nodev,relatime,user_id=1023,group_i
d=1023,default_permissions,allow_other 0 0
/dev/block/vold/179:33 /mnt/media_rw/sdcard1 ext4 rw,dirsync,context=u:object_r:
sdcard_external:s0,nosuid,nodev,noexec,noatime,data=ordered 0 0
/dev/fuse /storage/sdcard1 fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1
023,default_permissions,allow_other 0 0
EDIT 2: *** IMPORTANT!! Do NOT select External in the App2SD option in Link2SD. Otherwise you will not be able to install any apps from the Play Store (Insufficient Storage error)

I use GL to SD on my Slimrom: https://play.google.com/store/apps/details?id=com.slf.ListglApp
It may not have fancy UI like FolderMount or Link2SD, and it slight complex to use. But it works on per app basis, without re-partition too.

Hi leripe !
I have got the same device and ROM like you and i would like to know if you have found a solution to move apps to the sdcard ?
Thank you in advance, regards.

Oijkn said:
Hi leripe !
I have got the same device and ROM like you and i would like to know if you have found a solution to move apps to the sdcard ?
Thank you in advance, regards.
Click to expand...
Click to collapse
If it non system apps, you can use GL to SD as I provide the link already above. It works.

TNCS said:
If it non system apps, you can use GL to SD as I provide the link already above. It works.
Click to expand...
Click to collapse
Hi, i tried your link but this tool don't show all my user app so i can't move them... Have you another tool that can do the job please?

Oijkn said:
Hi, i tried your link but this tool don't show all my user app so i can't move them... Have you another tool that can do the job please?
Click to expand...
Click to collapse
Nope, sorry. I tried this tool and it work so never bother to look for another one.
If GL to SD doesn't have the app you want to move, you can manually link the app and the relevant folder at GL to SD settings. After you linked them, at the main page of apps you can tell it to start to move.

This thread shows up on google for me when trying to figure out why minitool partition wizard doesn't detect my phone at all. The guide I'm following says USB-SDcard reader is required but is that really true?? Surely there is a way to mount the SDcard at a low enough level to partition it without addition hardware?? Even if I have to mount it using TWRP recovery or something I would think it's possible. Anyone know?

Develop Bugs

welcome