installed amon and stuck please help - Droid Incredible Q&A, Help & Troubleshooting

ok guys i installed the amon_ra before it was pulled and i did a wipe to do a nand, and i get an error, then i tried to do a install .zip and i get an error, how can I get clockwork back on cos I cant start up a rom cos it wont install!!

Use the clockwork recovery img and flash it with unrevoked3

Use the PB31IMG.zip from UnrEVOked and flash it from hboot, that will get you the clockwork recovery
http://downloads.unrevoked.com/forever/recovery/clockworkmod/PB31IMG.ZIP

thank you guys so much!!

BlazeD OnE said:
thank you guys so much!!
Click to expand...
Click to collapse
Amon-RA recovery near bricked my phone.......or at least my rom doesnt play that nice with amon ecovery.

Amon_RA recovery is the standard on many Android devices; I hope devs will start writing ROMs that aren't dependant on just Clockwork Recovery since it requires an android app to be fully functional.
Sent from my TRS80 using XDA App

Related

Not able to access recovery after netarchy-toastmod Kernal

So I have the "HTC OTA Froyo 2.2, *FINAL*, build 3.36.651.6 (Rooted) Odexed" Rom, and the new Toastmod Kernal 4.0.3 which works great except now I can't get into clockwork recovery.
Before I added the kernal I had the rom stated above and recovery worked fine. Now when I go to bootloader with the new kernal, and click recovery, my evo just reboots the bootloader.
Any suggestions?
I would try and flash Amon Ra. I think it has to be flashed from bootloader as a pc36.img, but I'm not positive.
Sent from my FROYO'D EVO using xda app
Use Amon RA recovery. Clockwork sucks. There should be a link somewhere in the development forums. Just do a search for Amon RA.
Sent from my PC36100 using XDA App
Link is in my sig. Also, you can flash recovery with fastboot flash.
Thanks guys, I'm giving this a shot right now.
So the RA Recovery is on the root of the SD, but when I go into Fastboot or bootloader, I dont have an option to flash it. The only way I know how to flash is in recovery. However when I select recovery it just reboots the phone into hboot again.....
Guess I need a little more instruction, sorry.
chris17house said:
So the RA Recovery is on the root of the SD, but when I go into Fastboot or bootloader, I dont have an option to flash it. The only way I know how to flash is in recovery. However when I select recovery it just reboots the phone into hboot again.....
Guess I need a little more instruction, sorry.
Click to expand...
Click to collapse
You have to run fastboot on your PC after you go to fastboot on your phone, it is in the same place as ADB.
http://forum.xda-developers.com/showpost.php?p=6877247&postcount=98
Ok, appreciate it. I'll have to read up on it.
Could I flash the stock kernal from the "Rom Manager" app, or would that not work?

clockworkmod 2.5.0.5 to 2.5.1.2

so im on .0.5 and i seen that there is a 1.2 version available.. i've had no problems before or currently with .0.5, but i'm curious to the changelog of 1.2.. i'm not finding any info on it.. anything that would blow my mind or offer benefits.. much thanks..
I can confirm that it has optical trackpad scroll and works with SLCD screens.
No problems here either. Flashed a ROM, a kernel, a theme with 2.5.1.2 then restored a backup made with 2.5.0.5.
Ditto with the above. Flashed old backup using the new version of clockwork
where do i find if i am amoled or slcd??
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
I can't reproduce this for ya, sorry I can't help.
Anyone know what was changed in the newest version? I'm tempted to switch back to 2.5.1.1 because it was workings fine for me and I don't know if this one will. Creating a backup right now hopefully it works, I want to try out the new skyraider rom
gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
Same thing just happened to me. I had to re-flash the new version in Rom Manager and it works fine now.
gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
Try having Rom Manager flash it again?
JarrettXavier said:
I can confirm that it has optical trackpad scroll and works with SLCD screens.
Click to expand...
Click to collapse
Just want to confirm that you mean this version works without the extra mod?
Only difference I've noticed is the addition of fix permissions and partition sd card under the Advanced tab
Is anyone sitting on "checking MD5 sums" for a while doing anything in clockwork recovery?
camblue said:
Is anyone sitting on "checking MD5 sums" for a while doing anything in clockwork recovery?
Click to expand...
Click to collapse
Do you mean it takes a long time, or that it never completes?
Checking MD5s can take a while.
It completes, but takes about 10 minutes. 2.5.1.1 had this problem as well.
Sent from my ADR6300 using XDA App
20twins10 said:
where do i find if i am amoled or slcd??
Click to expand...
Click to collapse
hit menu, settings, about phone, hardware and if your hardware ends in 003 its a lcd model if its 001 or 002 its amoled
Sent from my pimped out phone
gbishop18 said:
I flashed clockworkmod 2.5.1.2 and now i can't get into recovery. It will boot into fastboot and hboot but when i click recovery from hboot it brings me to fastboot. Same thing when i try it from rom manager
incredible rooted with latest CM nightly, s-off
Click to expand...
Click to collapse
I also can't get into recovery after flashing the new clockworkmod. Will boot into hboot but when I try to boot into recovery I get stuck at the HTC Incredible white screen.
In ROM Manager, clear download cache. Then flash a different version of Clockwork, the reflash the current one and test.
Sent from my ADR6300 using XDA App
It's working fine for me. I opened up ROM Manager to do a back up and it prompted me to update CWM. I did it. Have rebooted into recovery a few times to be sure and have made a backup. Also the optical trackpad works MUCH faster and better in this version.
TheGreatGatsby00 said:
I also can't get into recovery after flashing the new clockworkmod. Will boot into hboot but when I try to boot into recovery I get stuck at the HTC Incredible white screen.
Click to expand...
Click to collapse
It might be a SLCD-related brick issue. On the previous version of CWM (2.5.0.5), you could flash a mod by (koush? adrynalyne? sp?) on top to get it working.
(I can't post links yet, so if you google "Rooting stock 2.2 using unrEVOked 3.22" it will be the first link, it's on incredibleforum, Step 3A of the OP)
Alternatively, putting BAMod on the root of your SD card works (if you don't get revoked tool etc to run cos it won't boot up) to start up your phone again into recovery. Remember to rename to "PB31IMG.zip"
Link: http://forum.xda-developers.com/showthread.php?t=845451

Issue with RomManager

So I am on CM 6.1, and I'm trying to flash Amon_RA or the latest version of CWM. I updated rommanager through the market.
THe issue is that the phone only boots into CW 2.5.0.1...even though when i run rommanager it says Current Recovery: ClockworkMod 2.6.0.1. If I try to flash RA as the alternate recovery, it says Current Recovery: RA Recovery v2.2.2....But when i reboot into recovery sure enough, its still CW 2.5.0.1.
Hopefully that makes sense. Thank you in advance.
brainwreck said:
So I am on CM 6.1, and I'm trying to flash Amon_RA or the latest version of CWM. I updated rommanager through the market.
THe issue is that the phone only boots into CW 2.5.0.1...even though when i run rommanager it says Current Recovery: ClockworkMod 2.6.0.1. If I try to flash RA as the alternate recovery, it says Current Recovery: RA Recovery v2.2.2....But when i reboot into recovery sure enough, its still CW 2.5.0.1.
Hopefully that makes sense. Thank you in advance.
Click to expand...
Click to collapse
Ok first off go to Amon reecovery thread and get the recovery that you can flash thru bootloader and it will change your recovery. Honestly I dont think you really grt the.full experience of how to properly use your phone using Rom Manager. Flashing Amin is just that eady and all directions is within the thread
If you need more help let me know
Sent from my EVO rocking Evervolv Gingerbread
playya said:
Ok first off go to Amon reecovery thread and get the recovery that you can flash thru bootloader and it will change your recovery. Honestly I dont think you really grt the.full experience of how to properly use your phone using Rom Manager. Flashing Amin is just that eady and all directions is within the thread
If you need more help let me know
Sent from my EVO rocking Evervolv Gingerbread
Click to expand...
Click to collapse
Worked perfect, thank you so much.

[Q] Help! Red Triangle / Exclamation Mark!

You know that little voice that tells you to stop and think about what you are about to do....well I didn't 'listen. I have just enough experience to be dangerous....which is why I am writing this thread.
I have a rooted EVO. It was rooted with Unrevoked 3. I was using Clockwork and had flashed several ROMs. Most recently using CM7. I have Nandroid backups and all was well.
In a comedy of errors my original nandroid file was deleted so that I had no was of returning to the stock EVO ROM. I was trying to update CM7 so that i could use the GPS. To do thisI had to flash Sense based ROM so that I could use the MSD(??) and then reflash my CM7 and voila, your GPS works.
Well I couldn't get any new roms to work. I tried several and they all crashed. I then had the great idea to use RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe to restore my EVO back to stock. Bad idea.
I now have a phone that boots straight into Fastboot. I can choose bootloader and get to the HBOOT screen. When I choose the recovery it looks like all is well. The phone goes into the white HTC screen but then goes to a Red Triangle/Exclamation Mark screen. I can get out of this screen by pressing the power button and vol up button. It goes to and Android system recovery screen.
My choices are
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
E:Can't open /cache/recovery/command
I have tried placing the PC36IMG.zip (downloaded from xda) file in the root directory. I get a signature verification failed if I try to install the update file from any other custom ROMs. Installation aborted.
All I want is to get my phone back.
I currently have HBOOT 0.79.0000 with S-OFF
Please help
http://media.xda-developers.com/images/icons/icon9.gif
Download a pc36img.zip of a recovery, such as among RA 2.3, then put a rom.zip on your card as well....load the recovery through bootloader and once you get into recovery flash your rom
Sent from my PC36100 using XDA App
You'll have to update all of your radios as well since you used an old RUU.
Vandelay007 said:
Download a pc36img.zip of a recovery, such as among RA 2.3, then put a rom.zip on your card as well....load the recovery through bootloader and once you get into recovery flash your rom
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
xHausx said:
You'll have to update all of your radios as well since you used an old RUU.
Click to expand...
Click to collapse
"So you're saying there is still a chance." Thanks guys. I'll get on this today.
Just a quick question. Do I need to rename these files to "update-'file name'.zip" ?
Boot into the bootloader, with the attached zip file exactly as it is. Don't changed the name or extract it. Once in the bootloader, select yes to update, this is amon_ra 2.3 recovery. If you want clockwork recovery, let me know.
When I boot into the Boot Loader I get this:
HBOOT
SD Checking
Loading...[PC36DIAG.zip]
No image!
Loading...[PC36DIAG.nbh]
No image!
Loading...[PC36IMG.zip]
No image!
Loading...[PC36IMG.nbh]
No image or wrong image!
Oh my GOSH! I finally got it! Thank you thank you thank you! I was using the wrong PC36img.zip file. Not really sure why there are several different versions of this...a newbie statement I'm sure.
The root script linked to in my sig can be used to update your phone if you wanted to use it for that, once it sees you have S-OFF it will skip all the rooting stuff and go straight to flashing the updated ROM radios and recovery. Afterward just use rom manager to flash clockwork and you'll be good to go.
edit: nm, just saw you got it
xHausx said:
The root script linked to in my sig can be used to update your phone if you wanted to use it for that, once it sees you have S-OFF it will skip all the rooting stuff and go straight to flashing the updated ROM radios and recovery. Afterward just use rom manager to flash clockwork and you'll be good to go.
edit: nm, just saw you got it
Click to expand...
Click to collapse
Teamwork is always win.
Excellent, glad you got it working!
Sent from my PC36100 using XDA Premium App

[Q] Clockworkmod Recovery 3.0.0.6 mod please Close

Question.... i rooted my phone using unrevoked and installed 2.5.0.1 but now i want to use the 3.0.0.6 i have it downlaoded and on the sd card of my phone and i ran it in recovry and it loads fine how ever when i restart my phone the recovery keeps reverting to 2.5.0.1
could someone just tell me where im going wrong with this XD
cheers the only thing i can think of doing is instaling a RUU then rerooting with a img of 3.0.0.6
Cheers
Hi there,
Try this http://forum.xda-developers.com/showthread.php?t=901503
Well i have tryed to use unrevoked to flash the img file and it always passes the first reboot how ever it always eather failes with a communications error or it sits on waiting for system to settle. and after a reboot it still running the old clockworkmod recovery
I,ve managed to successfully go through the whole Unrevoked process, selecting custom image, yet I still have the old cwm recovery
Unless I run update. Zip. Or start. Recovery from rom manager I'm still using the old version. Is there something we are doing wrong or is there another method
Sent from my HTC Wildfire using XDA App
I have succesfully flashed it with unrevoked. Downloaded it from here http://mirror.kanged.net/recoveries/recovery-clockwork-3.0.0.6-buzz.img
However first time it stucks at htc logo and then unrevoked says "waiting for root (safe to reboot if not working)" or something similar, so i disconected phone, pulled battery, booted and stared all again. This time everything went fine.
Only problem was that rom manager was still saying that im on 2.5.0.1, so downloaded this http://mirror1.kanged.net/recoveries/recovery-clockwork-3.0.0.6-buzz.zip and copied into sdcard\clockworkmod\download\mirror1.kanged.net\recoveries\ and deleted the old one from this path.
Hope it helped...
Finally managed to flash cwm 3.0.0.6 using Unrevoked 3.14. Unrevoked 3.2xx just didnt seem to work at all for me. Recovery is now a joy to use, and performing nandroid backups seems much faster
Sorry for the stupid question, but where can i get version 3.14? when i go to unrevoced.com i can only get version 3.32 wich says "Device Wildfire not supported".
Strange because I've rooted my Wildfire on this PC with unrevoked, so all Drivers are installed and it should work. I think it's a problem with the new version.
thanks in advance
Can't remember where I found it, but I still have it. I'll upload it later
After instal recovery-clockwork-3.0.0.6-buzz.img tru Unrevoked v3.14 there is problem with ROM CyanogenMod V7.0.0-RC2 superuser dont work i need to flash back with RUU_Buzz_HTC_WWE_1.14.405.2_R_C_Radio_13.45.55.24_3.35.15.19_release_141106_signed.exe then again run Unrevoked v3.2 and after that do restore with 2.5.1
Unrevoked 3.14, for anyone who needs it
http://rapidshare.com/files/453198400/reflash_package.zip
rapidshare link expired, i just tried
http://downloads.unrevoked.com/recovery/3.14/reflash.tar.gz
and it's working..
Reflashed clockwork 3.0.0.6 with it without problems.
cybertyk said:
Unless I run update. Zip. Or start. Recovery from rom manager I'm still using the old version. Is there something we are doing wrong or is there another method
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
did you manage to make it work?
gaspo.sk said:
did you manage to make it work?
Click to expand...
Click to collapse
You can't update recovery from ROM Manager. We don't have s-off.
Edit: In fact I'm not sure if ROM Manager can do it even with s-off.
My rom manager recovery is 3.0.0.6
I have described few posts back how i manage to do it.
And i also have fake recovery 2.5.0.1 i some zips have amend script and i dont have time to convert it.
zexcrazy said:
My rom manager recovery is 3.0.0.6
I have described few posts back how i manage to do it.
And i also have fake recovery 2.5.0.1 i some zips have amend script and i dont have time to convert it.
Click to expand...
Click to collapse
I meant, you can't permanently flash your recovery via ROM Manager. For that you need to use a reflash tool (Unrevoked for us) or use fastboot if you have s-off.
Oh, that, right. Sorry, my mistake.
Flashing recovery without rooting
Is there a way to flash a recovery using unrevoked without rooting?
I really need to send my phone to my carrier so I'm worried that they could find I've been messing around with it and void my warranty...
Ruu it from windows
Sent from my HTC Wildfire using XDA App
Michealtbh said:
Finally managed to flash cwm 3.0.0.6 using Unrevoked 3.14. Unrevoked 3.2xx just didnt seem to work at all for me. Recovery is now a joy to use, and performing nandroid backups seems much faster
Click to expand...
Click to collapse
Are you having 2 superuser app conflicting each other after flashing via Unrevoked 3.14 as it is described in other threads? (ClockworkMod v3.0.2.4)

Categories

Resources