[Q] Clockworkmod Recovery 3.0.0.6 mod please Close - Wildfire Q&A, Help & Troubleshooting

Question.... i rooted my phone using unrevoked and installed 2.5.0.1 but now i want to use the 3.0.0.6 i have it downlaoded and on the sd card of my phone and i ran it in recovry and it loads fine how ever when i restart my phone the recovery keeps reverting to 2.5.0.1
could someone just tell me where im going wrong with this XD
cheers the only thing i can think of doing is instaling a RUU then rerooting with a img of 3.0.0.6
Cheers

Hi there,
Try this http://forum.xda-developers.com/showthread.php?t=901503

Well i have tryed to use unrevoked to flash the img file and it always passes the first reboot how ever it always eather failes with a communications error or it sits on waiting for system to settle. and after a reboot it still running the old clockworkmod recovery

I,ve managed to successfully go through the whole Unrevoked process, selecting custom image, yet I still have the old cwm recovery

Unless I run update. Zip. Or start. Recovery from rom manager I'm still using the old version. Is there something we are doing wrong or is there another method
Sent from my HTC Wildfire using XDA App

I have succesfully flashed it with unrevoked. Downloaded it from here http://mirror.kanged.net/recoveries/recovery-clockwork-3.0.0.6-buzz.img
However first time it stucks at htc logo and then unrevoked says "waiting for root (safe to reboot if not working)" or something similar, so i disconected phone, pulled battery, booted and stared all again. This time everything went fine.
Only problem was that rom manager was still saying that im on 2.5.0.1, so downloaded this http://mirror1.kanged.net/recoveries/recovery-clockwork-3.0.0.6-buzz.zip and copied into sdcard\clockworkmod\download\mirror1.kanged.net\recoveries\ and deleted the old one from this path.
Hope it helped...

Finally managed to flash cwm 3.0.0.6 using Unrevoked 3.14. Unrevoked 3.2xx just didnt seem to work at all for me. Recovery is now a joy to use, and performing nandroid backups seems much faster

Sorry for the stupid question, but where can i get version 3.14? when i go to unrevoced.com i can only get version 3.32 wich says "Device Wildfire not supported".
Strange because I've rooted my Wildfire on this PC with unrevoked, so all Drivers are installed and it should work. I think it's a problem with the new version.
thanks in advance

Can't remember where I found it, but I still have it. I'll upload it later

After instal recovery-clockwork-3.0.0.6-buzz.img tru Unrevoked v3.14 there is problem with ROM CyanogenMod V7.0.0-RC2 superuser dont work i need to flash back with RUU_Buzz_HTC_WWE_1.14.405.2_R_C_Radio_13.45.55.24_3.35.15.19_release_141106_signed.exe then again run Unrevoked v3.2 and after that do restore with 2.5.1

Unrevoked 3.14, for anyone who needs it
http://rapidshare.com/files/453198400/reflash_package.zip

rapidshare link expired, i just tried
http://downloads.unrevoked.com/recovery/3.14/reflash.tar.gz
and it's working..
Reflashed clockwork 3.0.0.6 with it without problems.

cybertyk said:
Unless I run update. Zip. Or start. Recovery from rom manager I'm still using the old version. Is there something we are doing wrong or is there another method
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
did you manage to make it work?

gaspo.sk said:
did you manage to make it work?
Click to expand...
Click to collapse
You can't update recovery from ROM Manager. We don't have s-off.
Edit: In fact I'm not sure if ROM Manager can do it even with s-off.

My rom manager recovery is 3.0.0.6
I have described few posts back how i manage to do it.
And i also have fake recovery 2.5.0.1 i some zips have amend script and i dont have time to convert it.

zexcrazy said:
My rom manager recovery is 3.0.0.6
I have described few posts back how i manage to do it.
And i also have fake recovery 2.5.0.1 i some zips have amend script and i dont have time to convert it.
Click to expand...
Click to collapse
I meant, you can't permanently flash your recovery via ROM Manager. For that you need to use a reflash tool (Unrevoked for us) or use fastboot if you have s-off.

Oh, that, right. Sorry, my mistake.

Flashing recovery without rooting
Is there a way to flash a recovery using unrevoked without rooting?
I really need to send my phone to my carrier so I'm worried that they could find I've been messing around with it and void my warranty...

Ruu it from windows
Sent from my HTC Wildfire using XDA App

Michealtbh said:
Finally managed to flash cwm 3.0.0.6 using Unrevoked 3.14. Unrevoked 3.2xx just didnt seem to work at all for me. Recovery is now a joy to use, and performing nandroid backups seems much faster
Click to expand...
Click to collapse
Are you having 2 superuser app conflicting each other after flashing via Unrevoked 3.14 as it is described in other threads? (ClockworkMod v3.0.2.4)

Related

[FIXED] Help!Cant flash any recovery images

Ever since I updated to the last OTA I have lost clockworks recovery image. Thus now I am unable to install the latest froyo rom.
I have tried to install the latest clockworks recovery image and Amon_Ra recovery through Rom Manager. Each time it states it is installed but everytime I try to boot up to the recovery image it gives me the following error:
E: Can't open /cache/recovery/command
and it just gives me the Android System Recover <2e>
Any help would be appreciated....
It sounds like you are not rooted.
If you accepted the OTA from Sprint using your system update on your phone, you are no longer rooted and will not have a custom recovery/root permissions. You will be unable to flash any custom recovery/ROMS/delete any sprint apps/Other Root only things until someone comes up with a way to root 2.2.
Have a drink in hopes that a dev will come up with a way to Root 2.2 soon!
I didnt update over the phone
What happened is I installed a rooted verson of 1.47.651.1 but in doing that it got rid of the recovery image... it definetly a rooter version because i can run apps that require root.. such as wife tether titanium back etc...
any other suggestions...
coolguycarlos said:
I didnt update over the phone
What happened is I installed a rooted verson of 1.47.651.1 but in doing that it got rid of the recovery image... it definetly a rooter version because i can run apps that require root.. such as wife tether titanium back etc...
any other suggestions...
Click to expand...
Click to collapse
there's an update.zip around here somewhere that will allow you to boot into an early form of clockwork recovery.
so, assuming that you goofed something, but still have nand unlocked....
find that update.zip. put it and a .zip for a real recovery onto your sdcard. boot into hboot, let it run the update.zip, that will take you to koush's early clockwork recovery. use that recovery to flash a solid recovery.
done.
alternative method would be to use fastboot to erase the recovery partition, then put a new recovery in.
Here is the update.zip...Just extract Recovery.zip....Do this OR/AND what the Senior Member above said and you should be good
timothydonohue said:
there's an update.zip around here somewhere that will allow you to boot into an early form of clockwork recovery.
so, assuming that you goofed something, but still have nand unlocked....
find that update.zip. put it and a .zip for a real recovery onto your sdcard. boot into hboot, let it run the update.zip, that will take you to koush's early clockwork recovery. use that recovery to flash a solid recovery.
done.
alternative method would be to use fastboot to erase the recovery partition, then put a new recovery in.
Click to expand...
Click to collapse
I actually tried the update.zip one already and it doesnt install... it will stated that the signature cant be verified and it will about the installation... havent tried the fastboot approach... I guess I will need to find out how to do that now
so from the looks of it I am screwed... I have hboot .79 if that matters and from the looks of it the rooted rom i installed screwed up my nand unlock.. which is why i think i can install any recovery images... i tried alot of the nand unlock tutorials and most of them I eventually get to a point were i need to write to /data and i cant because permissions are denied... great... oh well i'll keep on trying... any suggestions are appreciated...
If you still have super user, try this...same thing happend to me.
http://forum.xda-developers.com/showthread.php?t=744621&page=4
I'm having a very similar problem also. My Hboot is 0.79.000 too & after trying clockworkmod recovery, a few RUU update attempts, and attempting to change ROMs completely (not in that order) I'm at a loss, no success anywhere. I can't even get in to recovery anymore. It just reverts back to Bootloader menu where my options are Reboot, Reboot Bootloader, or Power down (& I think there is one other option that i tried and sent me back to the aforementioned screen). However, I can still load my pre-existing ROM...
Does anyone have any ideas if there is anything I can do?
TIA
topdawgn8 said:
If you still have super user, try this...same thing happend to me.
http://forum.xda-developers.com/showthread.php?t=744621&page=4
Click to expand...
Click to collapse
I have a question bout this... I seen this before but the sdk that I downloaded for Windows 7 does not have the Su command... any ideas on how I can get it for Windows 7?
Sent from my PC36100 using XDA App
Nevermind I got the Su command to work
Sent from my PC36100 using XDA App
you can erase recovery from rom manager and try to reflash. i would recommend reinstalling rom manager just to make sure it installed correctly. it installed bad on me once and corrupted my recovery trying to update it, reinstalled and installed an old recovery then the newest one and it worked.
Thanks for the suggestions all. I followed the instructions from link you posted using terminal emulator. No such luck, still reading HBOOT 0.79.0000 and running same ROM.
I also tried reinstalling (several times) clockworkmod recovery images and it effects nothing.
Should I try to completely unroot my phone again? If the images i just flashed didn't do it what will?
Im totally at a loss here. ARG!
hit there jtwonbly.......are you also running the stock rooted 1.47.651.1?
Build number 1.47.651.1 CL195459 release-keys
yea same here......and what is it that your trying to do...go back to stock ROM?
I'd like to go to any other ROM. Its as if I'm no longer rooted anymore.
I think I may try to start all over again using NeckFaces old tutorial on unlocking NAND w/o adb. I'm just not sure if that will fix the HBOOT file because I can't get in to Recovery.
OK Guys thanks for all your help but I have been able to get it fixed now!!!
I pretty much had to redo all of Toast Root tutorial and NAND unlock to get it working. Both Part 1 and Part 2 even though I was already running a rooted rom.
The original problem I had is I kept getting told to just try the nand unlock in part 2 but the phone wasnt having it. It wouldnt like the engineering build of the pc36img.zip
So I started from Part 1. Downloaded the rooted rom pc36img.zip and what do you know it finally let me install it. By the time I was done with both parts 1 and 2 I was able to flash a recovery image, get back to hboot .76 and I am now another proud owner of an Evo running a rooted Froyo!!!!

Can't pass HTC screen

Guys i have a question regarding the htc splash screen. I rooted twice today just to test a few things.
When i rooted for the first time i used windows 7 + hboot drivers from unrevoked3 site and flashed/rooted my device (stock rom (froyo)). Everything worked fine but when i run clockwork recovery mode and select the backup option i get something strange.
My device is backing up and it says it's done, when i select the reboot option my device get stuck at the splash screen and reboots, hangs, reboots, hangs, reboots etc. I need to pull the batteries off to get back in recovery mode. This time i select restore and select the backup i created before all this happend. Now it's passing the htc splash screen.
Because i thought i got problems with the windows drivers i decided to root with linux, so i installed the official ruu update over my rooted rom and root it under linux to make sure i am a bit saver.
Now when i do a backup and reboot again i get the same thing ? it hangs at the splash screen. Is the unrevoked recovery tool bugged (clockworkmod) ??? because when i restore with the backup i created it is passing the htc splash screen again.
I don't understand.
(Sorry for my bad English)
PS: I used this rom to root. http://forum.xda-developers.com/showthread.php?t=828519
As far as i know you need to root only once..i guess rooting again n again may hav messed wid phone..nt sure though..wait for a reply from someone who is experienced..i hav been using android since past 3 months only
Sent from my HTC Desire using Tapatalk
What you could try is this.
Use unrevoked again, but in unrevoked select a alternative recovery image.
Then load this image http://forum.xda-developers.com/showthread.php?t=839621
This is the amon-ra recovery. And for the record, you can root with unrevoked as many times as you want
Btw, you are sure that you waited long enough? If you restored a nandbackup, booting the phone can take 5-10 minutes
Oo..i thght it is similiar to jail breaking tht needs to be done onl once...lolzz
Sent from my HTC Desire using Tapatalk
lordvoldemort said:
As far as i know you need to root only once..i guess rooting again n again may hav messed wid phone
Click to expand...
Click to collapse
You really didnt read well didnt you ? it already happend the first time i rooted . Secondly, if i root and install a official ruu update over it everything will get wiped and cleaned....so there would be no problems when i decide to root.
Lennyz1988 said:
Btw, you are sure that you waited long enough? If you restored a nandbackup, booting the phone can take 5-10 minutes
Click to expand...
Click to collapse
Yeah i am sure....after backup the phone showed me the menu screen that i could select options such as rebooting the phone. When i reboot after backup it doesnt get passed the splash screen and reboots (and those steps gets repeated). If i don't use recover....my phone is dead
- Flash a stock ruu (rom)
- Then root again and use amon ra.
Lennyz1988 said:
- Flash a stock ruu (rom)
- Then root again and use amon ra.
Click to expand...
Click to collapse
Already did that 1 minute ago....testing it now
Edit: Whooohooo.....works ... backed up files and rebooted now and i don't get stucked at htc splash screen.
Clockworkmod will never get on my device again.
MichelN said:
Already did that 1 minute ago....testing it now
Edit: Whooohooo.....works ... backed up files and rebooted now and i don't get stucked at htc splash screen.
Clockworkmod will never get on my device again.
Click to expand...
Click to collapse
This seems to be a documented problem with Unrevoked. The first reboot after rooting and backing up Nandroid seems to hang the system for some, and restoring the Nandroid fixes it. After restoring the Nandroid (as you did) there should be no further problems. And since you did that, your problem should have been fixed. And since you restored to a rooted copy, why did you have to try again with Linux? Your problem was already fixed by the Nandroid Restore..
unrEVOked isn't the issue, Clockwork Mod is...just use AmonRA instead
EddyOS said:
unrEVOked isn't the issue, Clockwork Mod is...just use AmonRA instead
Click to expand...
Click to collapse
Thought the 1st Nandroid Restore fixes it..Does Clockwork mod still pose probs?
Clockwork Mod is the issue - flash AmonRA from the start and you won't have this issue (or I never have anyway, use AmonRA as you can partition SD cards in it)
I have the same issue can't pass htc screen and with 2 black lines.
I will flash RUU then root by unrEVOked. My question is how to flash/install AmonRA, do i have to flash using Clockwork will it override my recovery? Sorry guys noob question...
protuger said:
I have the same issue can't pass htc screen and with 2 black lines.
I will flash RUU then root by unrEVOked. My question is how to flash/install AmonRA, do i have to flash using Clockwork will it override my recovery? Sorry guys noob question...
Click to expand...
Click to collapse
I didn't have 2 black lines, mine rebooted after it couldnt pass HTC splash...i needed to remove battery or it keeps rebooting.
What i did with clockworkmod is restore (the backup you created before rebooting)....this should fix the problem. If this is not the case then i don't know because i never rooted before. You should ask a expert.
Anyway because i needed to restore anytime i posted this topic, people said i should use AmonRA. So to do this i installed the latest official ruu (posted by EddyOS) (to make sure everything is clean and good again). Then i used linux to make sure it is saver.
When you downloaded the unrevoked3 tool open it and don't plug you phone yet, go to options and select custom recovery. Now select the AmonRA (latest version i used) to flash with unrevoked3. Now plug in your phone and relax.
The only thing i am scared off is to flash hboot to go s-off.
Actually the cause of this problem was when i have tried the method for s-off...sad...
When i run unrEVOked it says this thing....
Device "/sbin/sh:getprop: not found
"is not supported at this time.
protuger said:
When i run unrEVOked it says this thing....
Device "/sbin/sh:getprop: not found
"is not supported at this time.
Click to expand...
Click to collapse
Try flashing true Linux. Download Ubuntu and this way you can boot your pc in linux.
Could you please give me a step by step guide on how to this unrEVOked if i have already booted up to linux? Im not familiar with the codes.
protuger said:
Could you please give me a step by step guide on how to this unrEVOked if i have already booted up to linux? Im not familiar with the codes.
Click to expand...
Click to collapse
You need root rights in ubuntu, use google to find it
thanks hope google stops my sleepless nights...

[Q] Flashing Clockwork Mod

I have looked in the other forums for help with this but was unable to find anything related to my problem.
I am trying to install the clockwork mod recovery in recovery mode on my HTC desire as installing it from the market does not seem to work. I just install it and my recovery mode is still android system recovery 3e, not clockwork recovery like I should be getting.
So i got the clockwork recover zip file.. put it on my SD card and am attempting to install it myself in recovery mode. With apply SDcard:Update.zip
Now when I do it the install starts as it should then it fails to verify while-file signature and aborts the installation.
Any help would be great.
Your phone must me Rooted an S-OFF to install recovery in a way like that.
Unless you don't have those requirements, try unrEVOked to flash clockworkmod.
Hi,
Are you trying to also root and install a custom ROM ? or sticking with the Desire ROM as supplied by the carrier.
If you want root etc. then have a look at:
http://unrevoked.com/
It'll root and install ClockworkMod.
Ah that will explain it..
The problem I am having is I am unable to sucessfully root my phone using Unrevoked it keeps failing when it reboots the phone. I thought if i could manully install clockwork mod it would work. I guess I was Wrong.
nereme said:
Ah that will explain it..
The problem I am having is I am unable to sucessfully root my phone using Unrevoked it keeps failing when it reboots the phone. I thought if i could manully install clockwork mod it would work. I guess I was Wrong.
Click to expand...
Click to collapse
Use unrEVOked 3.21 (not latest on their site - if that's a no go) - that's working for the most people. And make sure you have installed the HBOOT drivers correctly!!! (check android developement forum for that).
Tired using a verison of 3.21 and it did not work either.. It was unable to get past the NAND lock.. it would install the root say sucess then say error failure to unlock NAND flash..
nereme said:
Tired using a verison of 3.21 and it did not work either.. It was unable to get past the NAND lock.. it would install the root say sucess then say error failure to unlock NAND flash..
Click to expand...
Click to collapse
Follow THIS guide! It should work.
And make sure the modified HBOOT Drivers are installed correctly!

[Resolved] Changing recovery issue

Hi there,
Today, I wanted to change my Amon-ra 2.0.0 recovery to version 2.0.1, because I read somewhere that nandroid backups would fail. And it failed once...
I launched Unrevoked, then I switched the recovery, and started the process. It went right until I got stuck at HTC logo. I had to reboot via the 3 keys combination. Once rebooted normally, I went to the recovery, and the version installed hadn't changed.
Is there any other solution to get this recovery flashed, in order to be able to perform a backup and flash the new RCMixHD 3.4.1 with A2SD+
Thanks !
Yes, but you need to be S-Off for that - the fastboot method.
So the only way to change my recovery is to s-off my phone ?
Also, I forgot to mention that I tried to flash it with Terminal emulator, with the command :
Code:
su
flash_image recovery
and I got error message stating I was running out of memory, and the process couldn't end properly.
Becasue you can not modify the NAND while in boot (S-ON).
Try unrevoked 3.21 with the RA Custom image you downloaded.
That's what I did previously, but it didn't work... I'll try later when I'll be back from college...
Use fastboot or revoked method.....
Sent from my HTC Desire using XDA Premium App
unroot then run unrevoked again with newest amon ra chosen as recovery
I did this today
First u need S-off if u want to flash another rec., easiest way.
Just go to http://alpharev.nl/ download the Iso Utility,do like the instructions say,burn it,and boot it.Turn UsbDebbuging on,plug the phone and follow 3 ez steps.
After i recomend this tool for flashing the new recovery,takes 2seconds http://forum.xda-developers.com/showthread.php?t=823315
Thank you all, i'll try this after the champions league match. Is there any risks with s-off ? Was it safe and painless ?
Sent from my HTC Desire using XDA App
Turns out I didn't need to s-off my desire. I'm a fool... Everytime I launched Unrevoked, I forgot to run the program as admin... 2 minutes ago, it popped up to my mind, and abrakadabra, it worked !
Yeah, that was necessary
BTW, you can brick your phone if you are not careful with the S-OFF procedure.
kev94 said:
Turns out I didn't need to s-off my desire. I'm a fool... Everytime I launched Unrevoked, I forgot to run the program as admin... 2 minutes ago, it popped up to my mind, and abrakadabra, it worked !
Click to expand...
Click to collapse
lol,i feel stupid now,i never thought of that >_>
Well glad it turned out ok for you enjoy ur new recovery.
Well yes and no.I did s-off in like 3 min with no problems and works like a charm If u just follow the instructions to the letter,u'll be fine.

[Q] Problem with CWM 5.0.2.0 stable installation.

Actually, I got no place to post my question. So, I thought of starting a new thread.
I have installed CyanogenMod 7 on my HTC buzz by downgrading its stock rom as it suffered a OTA update before. I guess you guys r well aware about the process.
During the downgrade, my phone got Revolutionary CWM 4.x.x.x by default. In fact, I have flashed CM7 using revolutionary.
Now, CM7 comes with ROM Manager built-in and I tried to install CWM 5.0.2.0 recovery right form the GUI. The update.zip was downloaded. I could update it manually form my recovery options.
But, it was not stable. Each time I boot into recovery, Revolutionary CWM shows up, instead of CWM 5.0.2.0. To use it again, I have update the package each and every time.
Is is quite normal? Or, I am missing something? Plz help with advice.:crying:
I did this via Rom manager. Not through Recovery.
YNWA
ChandanRoy said:
Actually, I got no place to post my question. So, I thought of starting a new thread.
I have installed CyanogenMod 7 on my HTC buzz by downgrading its stock rom as it suffered a OTA update before. I guess you guys r well aware about the process.
During the downgrade, my phone got Revolutionary CWM 4.x.x.x by default. In fact, I have flashed CM7 using revolutionary.
Now, CM7 comes with ROM Manager built-in and I tried to install CWM 5.0.2.0 recovery right form the GUI. The update.zip was downloaded. I could update it manually form my recovery options.
But, it was not stable. Each time I boot into recovery, Revolutionary CWM shows up, instead of CWM 5.0.2.0. To use it again, I have update the package each and every time.
Is is quite normal? Or, I am missing something? Plz help with advice.:crying:
Click to expand...
Click to collapse
Yes this is normal for ROM manager as using ROM manager is only giving you a temp recovery over your stock ( in your case revolutionary cwm ) to get the cwm 5.0.2.0 you want you need to get either a PC49IMG.zip version of the cwm and use the boot loader method, use ADB/Fast boot method or use the terminal emulator method.
Tutorials are all over the wildfire thread and so are the necessary files etc.
Sent from my Nexus 4
That what u have to flash is temporary.
For permanent recovery, copy the recovery onto your pc.
Turn on the willy in hboot mode, goto fastboot connect usb
Type fastboot flash recovery name.zip
here name is the name of recovery zip AS IT IS.

Categories

Resources