Openvpn settings connect to Openvpn Server but I cannot access anything in the connected LAN.
Have tried severals of images and severals of configuration but nothings help.
Now I use NeoPhyTe_Mod_1.7.1_Sense-FroYo_FRF91 same **** here
I suspect the tap device not do get up and receive IP.
Hope anyone have some ideas, have tried to get this to work since June mount.
See pic for my config
Hello.
I have the same problem!!
Can anybody help??
Best regards Grisu
Problem known and explained here:
http://code.google.com/p/android-openvpn-settings/issues/detail?id=35
You need to either:
su
ip ru del table wifi
or
ip ru del table gprs
Depending in how you are connected
Related
Hi,
I'm having problems with the latest LVSW ROM. The Wifi doesn't work on my 8525 anymore.
I got an error message and I only got it once while trying to connect to my Wifi at home and I wish I wrote it down. It complained of a DHCP error, something related to Pocket PC.
That's something I noticed as well when I Active Sync to my PC. It recognized it as a Pocket PC device.
Has anyone encountered this error? I've soft reset and hard reset my unit and it just won't connect via Wifi. It would try to Connect, then comes with a
Cannot connect to the network. Check your network and service provider settings and try again.
I hope someone can help.
Now I'm getting a
Cannot obtain a server assigned IP address. Try again later or enter an IP address in Network settings.
Thank you very much in advance.
al8525wu
I am also having this problem, has anyone found a solution?
Thanks.
go here: http://forum.xda-developers.com/showthread.php?t=304004
Hello I need to have a fix IP for my s620 becouse my router need this to allow navigate internet. All my PC in network has fix IP. Does it is possible to have this for s620?
Hi everybody.
I just bought a desire hd. i can connect every wireless connection WEP, WPA, WPA2 etc. but i can not connect 802.1x Enterprise with peap gtc network
My friend has a Galaxy Ace he can connect same with 802.1x peap gtc network. his firmware also Android 2.2
I'm configuring same as he did but still can not connect it.
I don't know what is my Desire HDs problem?
can anybody help me?
I solved my problem
t is very sad that WPA2-Enterprise is not available to be configured in the WIFI-Settings dialog. But if you know how to configure it by hand you can get it to work. I want to use my schools WPA2-Enterprise so I tried it and found out how to get it working. I will explain my taken steps below so you can as well get it to work. The trick behind is that you edit the /data/misc/wifi/wpa_supplicant.conf by hand. In that file the configuration of the wifi-networks is saved. You need to add the following lines: (in my example for the HSR-Secure network)
network={
ssid="HSR-Secure"
key_mgmt=WPA-EAP
identity="<username without 'hsr\'>"
password="<your password>"
}
For those who don’t know how to do that here some more explanation. To edit the mentioned file above your phone has to be rooted. Than you need the Android SDK installed on your computer (we will need adb.exe). You need the usb cable to connect the phone to your computer. Open a command line shell and go to your android-sdk tools folder and then do the following (thanks to Thomas Kälin for this easier version):
# Copy the config file from the phone to your computer:
adb pull /data/misc/wifi/wpa_supplicant.conf C:/MyFolder
# Now Edit your wpa_supplicant.conf with your favorite editor and load it back to your phone:
adb push C:/MyFolder/wpa_supplicant.conf /data/misc/wifi/wpa_supplicant.conf
Now go to the wifi settings in your phone. Turn wifi off and on again. It should successfully connect now. Here some pictures to show how it should look like when working.
android-hsr-secure android-hsr-secure2
I hope this helps some of you to get WPA2-Enterprise working.
Have fun surfing the internet with your phone at work/school .
Click to expand...
Click to collapse
Source: blog.pboos.ch/2009/04/android-using-wpa2-enterprise/
Yes finally got this working using the FULL WIFI App from the market. Thanks for the help I did use some suggestions.
maydin said:
I solved my problem
Source: blog.pboos.ch/2009/04/android-using-wpa2-enterprise/
Click to expand...
Click to collapse
Adding the password line worked perfectly.
Hi friends
Searched the forum and tried the proposed solutions but nothing helped.
I'm trying connect to addhoc wifi on my desire HD os=2.2
I replaced the wpa_supplicant file with one of those that exists on the forum and
indeed now i see adhoc networks but the connection is not stable - it goes like connecting -> obtaining ip address -> connected -> disconnected
and so on in loop ... i verified that the ip is static and i even put gateway+mask+dns.
when trying to ping the target it even sometimes succeeds!
Tried with several different adhoc targets and tried both wpa_supplicant for ver 0.5 & ver 0.6
Please does someone can help ?
thanks
ezchip said:
Hi friends
Searched the forum and tried the proposed solutions but nothing helped.
I'm trying connect to addhoc wifi on my desire HD os=2.2
I replaced the wpa_supplicant file with one of those that exists on the forum and
indeed now i see adhoc networks but the connection is not stable - it goes like connecting -> obtaining ip address -> connected -> disconnected
and so on in loop ... i verified that the ip is static and i even put gateway+mask+dns.
when trying to ping the target it even sometimes succeeds!
Tried with several different adhoc targets and tried both wpa_supplicant for ver 0.5 & ver 0.6
Please does someone can help ?
thanks
Click to expand...
Click to collapse
My phone is samsung galaxy GT - I 5503. I do too and obtainging IP address...
This question not yet solved
I have the same issue with my sgs2. I get no connection ever, only a constant "Obtaining IP address.."
I'd suggest resetting your router and forgetting the network and trying to reconnect. Also a static IP might work but as for finding any of your provider's info, that's up to you. Unfortunately, XDA doesn't even recognize my network (Sasktel) so I am having a very tough time with this!
most probably firewall problem , i had same problem with hotspot doing exactly as you discribe.
it can also happen by some custom Roms and don't happen with others ( firewall disabled ) .
Also lot of sense Roms have an issue with that exact wifi problem , not like AOSP Roms ,i don't know why
I only had this problem with a network called; 'eduroam', my schools' network. I solved it by recotting & changing the network security TLS/TTLS/EAP or somethinf like that.
Hey XDA!
just a quick question. Has anybody been able to connect to a wifi network after changing your MAC address? I've tried it on Oxygen, Hydrogen, CM13 and it's always the same, as soon as I change the MAC if I try to connect to a network it will stay at "obtaining ip address" and never connect unless I change back to my original MAC. Any help or input would be appreciated, thanks.