Hello,
I have tried attempted to root and flash a new ROM on my phone and now I seem to have lost SD and USB support. it does not recognize any of the SD cards i put it (doesn't realize theres an SD card inside) and does not recognize any USB plugged in.
I have HBOOT .80 and i THINK i got the root correct (lotsa problems along the way so i'm not sure), but i was able to flash a ROM (NexTSENSE) so i think it worked. now, i saw a thread about fixing USB support but that required SD support. and reading that made me feel like i was royally screwed. in any case, any suggestions? I think USB support is still kinda there since I can get it to recognize it in the boot menu. but when i try to do it in recovery and use the flash rom .bat, it says device not found.
it would seem that the main concern right now is that i can't get it to see my SD cards. any of them, even after reformats and whatnot.
i can't connect to HTC Sync or anything of the of the sort. usually when i charge the phone, you get the charging notification but i don't even get that now. sounds like a driver problem but i can't see what is wrong. my computer doesn't even recognize the phone as a device every now and then
Hope i provided sufficient information. New to android scene so don't be too hard on me please =O but yea, any suggestions are welcome. thanks in advance
edit: usb support... ever so slightly back. aka, it charges now. probably was drivers on my lappy getting funny after moving between bootloader and recovery and all that fun stuff
You have the usb brick issue. Check out the thread on that. Also once you are up and running again, root using unrevoked or the fake flash method. All information is available in the dev forum.
ok, i've done some reading and this is what i've found so far. my phone is stuck in USB debug hence no USB support and somewhere along the way, SD support was disabled. from what i see, the fix is to
first:
reload the step1 of root to get back to 1.15 and basic root access.
second:
from there, i can re-enable SD support using the command:
fastboot oem enableqxdm 0
third:
apply USB-Brick fix found in post 1 of thread
and then i should be able to reload ROMs as usual. is this correct?
and where exactly do i put in the command to re-enable SD support? this is what has be confused right now. along with the commands for the USB fix
i am using the tinycore method so i just have the step1.sh. and then in the same console, can i enter that command? should i do it after a reboot? or load back into bootloader to do it. (bootloader or fastloader)
OOOOK. sorry about the continuous posts. putting new info up so it isn't exactly a bump right?
in any case, i used the androidSDK tools and ran the fastboot from there and i think i re-enabled my SD correctly. i was then able to run the USB-brick fix found on modaco forums. all done and done. nowww, since i just went through half the root process (step1.sh with tinycore), do i need to finish it? or since i had already rooted before, is it all done now?
I'm not 100% sure about that as I haven't had to fix the usb brick for ages now!
Download and install titanium backup from the market. If it works fine, then you are rooted. If not, root woth unrEVOked or fakeflash.
All the older root methods that require usb during the root process leave you open to the usb brick again.
Hi fatpandas..
Is your phone ok now? Actually my phone also have a problem like yours last week..until now,i can't fix it..if now your phone ok,can u share with me..thnks in advance..
@csyrix
sorry to hear about your situation. after just being there, i can tell how horrible it is. good news is, if you really have the same problem, then it is definitely fixable.
now, i don't know what method you used to flash yours the first time but from what i've seen, they're mostly the same. what you wanna do first is do that step1 thing where you have a temporary ROM installed. (1.15?) same process as usual.
then you'll need to run 'fastboot oem enableqxdm 0' with phone plugged in while in FASTBOOT (back button + power button thing)
in case you don't know where to put that in, you wanna run that in your command prompt (computer) while operating in the tools folder of the android SDK. (thank god for my limited computer knowledge cuz all the instructions i found just say, "run this command" and like hell if most know how/where)
in any case, the end result will be you having completed step1 and having re-enabled SD support. then turn off phone.
then get the fix from this thread
move that to your SD card (micro SD adapter) and turn back on your phone into bootloader. go to the recovery menu and hold volume up + power to bring up menu and hit the apply: update.zip.
then all should be well. i then moved on to step2 to make sure i had rooted properly. may not be necessary but i remember reading that rooting a rooted device isn't a problem so i just felt the need to do it to be safe.
that should be it. the link provided actually has all the instructions anyways (i hope mine are a bit more clear), but if not, that link should be able to fill in the holes. g'luck sir
Related
I been flashing a few roms today, then all of a sudden when i plug the phone into usb my laptop is asking to install Qualcomm CDMA drivers...
Now i did a look at the USB bricked threads, and i FM Radio doesnt work (but i cant say it worked before as i never used it) and usb obviously doesnt work.
IF it is a brick, how do i fix? the threads i read before were some what confusing.
Oh im also running the 2.2 Sense ROM. Slightly edited by me which could have crapped things up.
Any help would be appreciated.
I recently USB bricked my Desire, took me days to get it sorted despite following the guides to the letter. Can you access your SD card?
I ended up solving my problem by using a Vista laptop, which recognised my phone and allowed me to run the 'fastboot oem enableqxdm 0' command in SDK. Don't know why I couldn't get it fixed by using the various other OS.
http://forum.xda-developers.com/showthread.php?t=717361
http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
Just want to check, has this problem made me loose my root? because the guides say to root the phone....
EDIT
i do have root, just installed ES file manager and i can go into the system folder etc... well im guessin that means im rooted?
EDIT
im a moron, you can delete this thread if you want mods.
On Thursday the 29th my phone decided to take a dump on itself. Since then it has not been able to:
-Read any micro SD cards
-Connecting to computer doesn't fully allow USB connections, it detects something plugged in, but nothing else. No ADB, no RUU update, no Sync, etc.
-Cannot charge unless off
All of the above happened while trying to get onto the leaked Froyo. I cleared the cache and wiped the data then this happened.
I already ordered a replacement from Sprint (which I have yet to hear about), but I think I can fix this one by updating the OS.
Problem is that it downgraded me to a version earlier than the one that was on the phone when I first got it. Being on this version is causing a problem by not allowing HTC Update to even see any updates.
So basically I need to update without the use of USB or SD card.
Any help?
Have you tried this http://forum.xda-developers.com/showthread.php?t=695243
063_XOBX said:
Have you tried this http://forum.xda-developers.com/showthread.php?t=695243
Click to expand...
Click to collapse
Thanks for the quick response.
That seems like it will be of a lot of help, but unfortunately adb cannot detect the phone.
EDIT:
It's also mildly amusing the way anytime someone also had this problem in that thread (the < waiting for device > in adb due to it not detecting the phone) people would just ignore it and continue on.
I have noticed that the computer can somewhat recognize the phone if it is in HBOOT USB mode. It is enough for the fastboot command to go through but return with a failed.
kbone213 said:
I have noticed that the computer can somewhat recognize the phone if it is in HBOOT USB mode. It is enough for the fastboot command to go through but return with a failed.
Click to expand...
Click to collapse
does adb work while it is in hboot? if so you should be able to push a pc36img.zip to it and fix it that way.
t3project said:
does adb work while it is in hboot? if so you should be able to push a pc36img.zip to it and fix it that way.
Click to expand...
Click to collapse
No, it only is able to recognize some things while in HBOOT. Example would be PDANet, which I used to be able to read the phone in the first place on Windows 7 x64, can see that the phone is connected. Adb still reads no devices though.
I'm pretty sure this happened when trying to wipe the phone to do a clean install. My assumption is that it wiped a file that was otherwise necessary to keep the SD card reader and USB port operational.
Is there any way that I can execute the "fastboot oem enableqxdm 0" somewhere on the phone without using adb?
Did another reset on it. Battery was low and turned the phone off without my knowledge. I turned it on to check if I had any messages or whatnot and got a message saying that the battery is low and that the current being given from the USB is not strong enough to charge it and to switch the cable.
What in the software would cause the current to be low?
Hi all...bare with me here, I posted this earlier, but in the wrong forum section so I am going to start over here.....thanks for your patience....
Hi everyone...I have a problem..I tried to use the Firerat zips to increase my internal storage, and during the flash of the zip file the phone hung and I had to pull the battery out.....since then the usb wont mount.
I am using a Tmobile mytouch slide 3g.
I tried using the sdk and running the fastboot commands etc to get the sd card to mount...no go.
I have tried the fastboot oem enableqxdm 0 command and no go....
Note:..My sd card works fine in a card reader on my computer, I can drag and drop anything to it etc. etc.
Finally i downloaded the stock rom, and i was able to put it on the card, and rename it ESPRIMG.zip and installed it through recovery...My phone was rooted and S-off running ginger, but now back to stock...S-on, and hating the phone now...lol.....
I have been all over the web and I am so confused...everywhere you search there is something different, I just dont know what to do, Windows doesnt recognize the phone when plugged in so I cant load custom rom etc back on....AARGH!!!..I am so frustrated, and have a migraine messing with this damn thing.....lol...
Someone here suggested the MISC is bad and that a binary flash_img would fix it, but honestly, I have no idea what any of that means...all that means to me is confusion, and I have that already.....lol
Can someone please suggest what I may try doing?I am pretty savvy with computers but some of the adb/shell stuff is very confusing to me, I dont like cmd prompts...so maybe a detailed explanation?..
Thank you so much for taking your time to read my problem, I really appreciate it very much.....Dirtylarry
"Kharma...It's a good thing"
ok man im gonna try to understand the problem... you say your usb mount doesnt work but the sdcard works with the adapter, then you went back to stock and un-rooted and the pc doesnt recognize your phone? right?
So it looks to me (just an idea) that the problem is your cable or the port on your pc... just beacuse your sdcard IS working in your phone as well since you used the ESPRIMG.zip(wich was really unnecessary) and you flashed it using the sdcard obviously.
Now you need to find a way to root it again just like you did the first time... dont mess with the drivers since you havent changed them in your pc (i guess) and try this guide....
http://richard.gluga.com/2010/08/complete-guide-to-rooting-and-hacking.html
Now all i can say is ALWAYS DO A NANDROID BACKUP BEFORE MESSING WITH YOUR PHONE. And check the cable/ports... thats the only problem i can think of...
well the fact that I have 3 computers that all used to recoginize the phone just fine is what's weird....none of them do, nor does my usb connection on my car stereo...the computers all say "USb not recognized" etc. etc. and the car stereo says USB N/A .......So i'm just at a loss as to what is going on here....Any ideas????? Thanks much ....Dirtylarry
Try installing PDA Net. It installs USB Drivers and resets the registry. One day it would work, then the next day it didn't work, reinstalling PDA Net worked every time.
Thanks Wave_Sailor, I tried the pda net install but it wont work....Everytime I try it says that it can't handshake to the phone, and then gives me an error code 103, I have tried many many times....also, in the device manager for computer it shows a yellow Exclamation mark everytime I plug the phone in listed at "Other Devices", and says Qualcomm CDMA Technologies MSM....So I googled, and found another thread saying Install Windows mobile 6 center, so I did, and nothing changed.......ARGH....DIrtylarry
Do part III, but while the phone is unplugged, download and install HTC Sync, and then plug the phone back in.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Have you checked in device manager on your computer to see if the mass storage device has a yellow triangle? I just went through the same thing but in reverse. My pc would see the sd card while in my phone but not through the reader. I still haven't gotten it straightened out either, just learned to live with it.
dirtylarry10 said:
Ok...I did EXACTLY what you have suggested, and in the driver information box this is what I got after the install....
USB Composite device installed successfully
USB Mass Storage Device Failed
Mytouch slide tmobil installed successful
Still a no go on the Mass storage device......hmmm.....so weird of a problem to have....I would have thought that clearing everything on the phone and going back to stock would have done the trick......any more ideas?...Thanks so much for your help.....Dirty
Click to expand...
Click to collapse
Make sure you don't have any drivers disabled. Ran into that problem with a different phone. I had one driver disabled so it wouldn't install some of the other drivers.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Ok...just checked,...no drivers disabled in device manager...has to be something wrong with phone...its a/most like the driver is missing from within the phone or something...isn't there some way to get this back to where I could root it and install a custom rom again without the USB to phone connectivity and use my card reader to get some sort of files back onto phone that way?
ok....well I re-did the whole flash process over, and I am now rooted again once more.....I dont know how or why or what...but I am now going strong again.....lol thanks for the help everyone,
Hi chaps, I've done a lot of searching but unlike many who managed to fix theirs I fear that my Desire is dead. Did a nandroid backup and during reboot for one reason or another (likely the cheap Ebay battery) the phone rebooted a couple of times and I suspect it's corrupted the ext4 that was holding data. Phone was running Starburst 1.5 Classic with data2sd. It's also s-off.
Ok, I've read threads where people have plugged it in and using adb have managed to issue a command to have the phone re-enable the sd card. The issue I have is that adb doesn't even recognise that the phone is actually connected. I've tried this on both my PC and laptop with no joy.
I can still get into recovery and also fastboot and there must be some life as the phone recognises the USB connection when plugged into the PC but 'adb devices' gives me nothing so I therefore can't issue commands.
I have also tried putting the original firmware back on via PB99IMG.zip but since the phone's not reading the card at all that too is a dead end. It still boots to recovery and I get the 'Why so serious' logo if I try starting the phone up but I just can't get any further with it.
Anyone any ideas?
You can wipe and flash partitions and files from fastboot
http://android-dls.com/wiki/index.php?title=Fastboot
Once you get it working, restore your nandroid to see if it's working and not corrupted by the reboot. If it's not working, you can rebuild in fastboot!
Ok, I'm doing some more reading and learning, driving me nuts this thing. Cheers.
Edit: That won't work as I cannot gain access to the phone from the PC. adb devices show nothing connected even when it clearly is.
Edit 2: C:\Android\android-sdk\platform-tools>fastboot
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
Perhaps I'm missing something???
Sorted I think, was me being a n00b. Will post back if I manage to get it all running again.
Did you get fastboot to work and recognise your device?
Take a look at the thread I posted earlier, the command to check it is
Code:
fastboot devices
My LG E980 is bricked. I can access download mode and that is it! I am unable to boot into recovery,
and the hard reset screen simply sits there forever. My computer only recognizes my device as an "unknown usb device."
I'm unsure what can be done about this, but I feel like this is better than the infamous QHSUB icon displayed when the device cannot be recovered.
Does anyone have a remedy for this problem?? I have GOT to fix this phone and can't afford to Jtag the device, but I'm losing hope that this is possible, PLEASE help. :crying:
Have you installed the LG drivers for your pc and tried the unbrick method?
Yeah dude there's an unbrick method. If this doesn't work just sell the phone on Ebay. http://forum.xda-developers.com/showthread.php?t=2302660
There is never a time when this device cant be recovered. even the qhusb is a fairly simple fix. ill go ahead and make a sdcard boot image tonight. do you have a 32gb sdcard? (or larger) and an sdcard reader, if you have those two things i can make an unbrick.img that you flash toi the sdcard and put in the non-booting phone and it will get you to download mode/recovery mode. ill have to check out what partitions are where as i dont wish to include my efs along with it all .
twill1987 said:
My LG E980 is bricked. I can access download mode and that is it! I am unable to boot into recovery,
and the hard reset screen simply sits there forever. My computer only recognizes my device as an "unknown usb device."
I'm unsure what can be done about this, but I feel like this is better than the infamous QHSUB icon displayed when the device cannot be recovered.
Does anyone have a remedy for this problem?? I have GOT to fix this phone and can't afford to Jtag the device, but I'm losing hope that this is possible, PLEASE help. :crying:
Click to expand...
Click to collapse
Happened to me.
1. With the phone on download mode and plugged in the computer; uninstall the unknown device on your computer using device manager. The computer should try to get the drivers for your phone.
2. If it doesn't. Repeat step one and install the drivers first.
That worked for me hopefully I'll work for you.
Sent from my LG-E980 using XDA Premium 4 mobile app
Yes
riki126 said:
Have you installed the LG drivers for your pc and tried the unbrick method?
Click to expand...
Click to collapse
Yes I tried that. The drivers won't install. I even used another windows 8 computer my roommate has and switched out
the usb cables, still came back "unknown device"
shabbypenguin said:
There is never a time when this device cant be recovered. even the qhusb is a fairly simple fix. ill go ahead and make a sdcard boot image tonight. do you have a 32gb sdcard? (or larger) and an sdcard reader, if you have those two things i can make an unbrick.img that you flash toi the sdcard and put in the non-booting phone and it will get you to download mode/recovery mode. ill have to check out what partitions are where as i dont wish to include my efs along with it all .
Click to expand...
Click to collapse
I do have a 16gb sd card, but I can pick up at 32 gb sd at my local best buy. I have an Asus laptop running windows 8 and it has an SD card reader. I am a little confused (semi-noob) as to how this will work because my phone will boot up, and the led changes colors on the home button for about 4 seconds and then the light stops flashing. The phone is stuck on the LG boot screen, and there is no way out of it but to pull the battery or to reset with power button. Of course no recovery as previously mentioned. I really just want to get back to stock, but I can't manage to get both the windows 8 computers I've tried to detect the phone in download mode. Ever since I switched to the Candykat rom 4.4 the computer wasn't able to recognize the phone, even when the phone was fully functional inside the rom.
I have tried it on my dads windows 7 laptop as well with no dice. Instaled LG drivers, uninstalled LG Drivers, uninstalled device from the Device Manager. I've done everything I could think of. I previously was in a Philz touch recovery, but every rom I tried to flash wouldn't work. I tried to flash another recovery from inside it and then the device bricked like it is now. What a head ache. If you think this method would work, I am more than willing to try it, just unfamiliar with what I need to do on my end.
Okay
stulzerl said:
Happened to me.
1. With the phone on download mode and plugged in the computer; uninstall the unknown device on your computer using device manager. The computer should try to get the drivers for your phone.
2. If it doesn't. Repeat step one and install the drivers first.
That worked for me hopefully I'll work for you.
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will give your method a shot, but I have done this a lot already. The only thing I can think of is I usually unplug the phone from the computer right after deleting the drivers and uninstalling in device manager. Maybe I should just leave the phone plugged in and see if the computer automatically downloads the drivers, but I don't think it will because I've tried to update the drivers before. It gives me an error code "10" and says the device has malfunction or stopped working This phone has been undetectable via USB since flashing the candykat 4.4 rom. Every computer I've tried (3) and every USB cable (3 again) has displayed it as an "unknown device"
twill1987 said:
I will give your method a shot, but I have done this a lot already. The only thing I can think of is I usually unplug the phone from the computer right after deleting the drivers and uninstalling in device manager. Maybe I should just leave the phone plugged in and see if the computer automatically downloads the drivers, but I don't think it will because I've tried to update the drivers before. It gives me an error code "10" and says the device has malfunction or stopped working This phone has been undetectable via USB since flashing the candykat 4.4 rom. Every computer I've tried (3) and every USB cable (3 again) has displayed it as an "unknown device"
Click to expand...
Click to collapse
I've had similar issues when i had my optimus g. I had to use a pc with xp to flasht he phone, dunno why though. You could give that a shot.
twill1987 said:
I do have a 16gb sd card, but I can pick up at 32 gb sd at my local best buy. I have an Asus laptop running windows 8 and it has an SD card reader. I am a little confused (semi-noob) as to how this will work because my phone will boot up, and the led changes colors on the home button for about 4 seconds and then the light stops flashing. The phone is stuck on the LG boot screen, and there is no way out of it but to pull the battery or to reset with power button. Of course no recovery as previously mentioned. I really just want to get back to stock, but I can't manage to get both the windows 8 computers I've tried to detect the phone in download mode. Ever since I switched to the Candykat rom 4.4 the computer wasn't able to recognize the phone, even when the phone was fully functional inside the rom.
I have tried it on my dads windows 7 laptop as well with no dice. Instaled LG drivers, uninstalled LG Drivers, uninstalled device from the Device Manager. I've done everything I could think of. I previously was in a Philz touch recovery, but every rom I tried to flash wouldn't work. I tried to flash another recovery from inside it and then the device bricked like it is now. What a head ache. If you think this method would work, I am more than willing to try it, just unfamiliar with what I need to do on my end.
Click to expand...
Click to collapse
I dont know lg's download mode, kdz, tot etc all that well. im more of a samsung guy. however qualcomm since the s4 chipset has allowed for sdcards that are properly formatted to boot the os instead of the internal emmc. here is a decent guide, just need to make teh image for this device. this will let your device boot no matter how bad it gets you are welcome to try with 16gb, the rule of thumb i know of is as big as teh emmc is use that same size or larger sdcard, however some people have had sucess withs maller, just not many that i know of. http://forum.xda-developers.com/showthread.php?t=2439367
however afaik the only way to reflash teh bootloader partitions is via kdz/download mode so perhaps the sdcard will let you get into that mode and then you can flash, so long as you keep your sdcard like that it will boot fully, but in order ot get your sdcard back you need to repair teh files on your phone .
Thanks
WeActOnImpulse said:
Yeah dude there's an unbrick method. If this doesn't work just sell the phone on Ebay. http://forum.xda-developers.com/showthread.php?t=2302660
Click to expand...
Click to collapse
I have tried this and unfortunately since the USB drivers aren't detected by the computer there is no way for me to flash back to stock.
Thanks for the information though, I appreciate it.
shabbypenguin said:
I dont know lg's download mode, kdz, tot etc all that well. im more of a samsung guy. however qualcomm since the s4 chipset has allowed for sdcards that are properly formatted to boot the os instead of the internal emmc. here is a decent guide, just need to make teh image for this device. this will let your device boot no matter how bad it gets you are welcome to try with 16gb, the rule of thumb i know of is as big as teh emmc is use that same size or larger sdcard, however some people have had sucess withs maller, just not many that i know of. http://forum.xda-developers.com/showthread.php?t=2439367
however afaik the only way to reflash teh bootloader partitions is via kdz/download mode so perhaps the sdcard will let you get into that mode and then you can flash, so long as you keep your sdcard like that it will boot fully, but in order ot get your sdcard back you need to repair teh files on your phone .
Click to expand...
Click to collapse
Wow, that sounds awesome. I followed most of that. I access download mode on the device by pressing vol up and down simultaneously and plugging in the usb cable. I am more willing to try this, and if it works I will pay you from my paypal. I guess all I need now are those files to run to the sd card. I read the tutorial you posted for the samsung and downloaded the windows disk manager. I am eager to try this method, though it is admittedly very new to me.. If you can post those files, I will follow the instructions you give and pay you a little bit of money for your help!
I am a broke college student so it won't be much, but I really appreciate your response and information on this method with the qualcomm s4.
Here is the unbrick image. follow the guide for your platform (gunna guess windows) and write this to your sdcard after backing it up. from there you need to restore your partitions by flashing them .
https://mega.co.nz/#!YB5xWQ7Y!Qcnx9UmcNn-f6skfiIFN-jd0EeYxdmrQGA1zzP5hfA0
Just wrote it to sd card
shabbypenguin said:
Here is the unbrick image. follow the guide for your platform (gunna guess windows) and write this to your sdcard after backing it up. from there you need to restore your partitions by flashing them .
https://mega.co.nz/#!YB5xWQ7Y!Qcnx9UmcNn-f6skfiIFN-jd0EeYxdmrQGA1zzP5hfA0
Click to expand...
Click to collapse
Okay so I bought the 32 gb sd card. Just wrote the .img file you sent me to the sd card.
I powered on the phone and nothing happened, I got the same LG screen where the led flashes and then stops.
I followed that guide, but am I supposed to go to download mode instead of just powering on the device?
I got a little confused by the samsung jargon lol. I just want to know after I've written the unbrick.zip to the sd card
how do I get my phone to recognize the card is there? And once I am able to do that how do I "restore my partitions by flashing them?"
I do have the factory firmware set to flash through lg flashtool, but the phone can't be detected of course due to the usb issue.
Just want to say thanks for walking me through it this far, I feel like I'm close hopefully but unsure what to do next.
twill1987 said:
Okay so I bought the 32 gb sd card. Just wrote the .img file you sent me to the sd card.
I powered on the phone and nothing happened, I got the same LG screen where the led flashes and then stops.
I followed that guide, but am I supposed to go to download mode instead of just powering on the device?
I got a little confused by the samsung jargon lol. I just want to know after I've written the unbrick.zip to the sd card
how do I get my phone to recognize the card is there? And once I am able to do that how do I "restore my partitions by flashing them?"
I do have the factory firmware set to flash through lg flashtool, but the phone can't be detected of course due to the usb issue.
Just want to say thanks for walking me through it this far, I feel like I'm close hopefully but unsure what to do next.
Click to expand...
Click to collapse
you wrote the image to the sdcard? i wonder if its because you still have the low level bootloaders that it may not be booting from the sdcard, normally this is done to fix qhusb errored devices. as for restoring the partitions all you would need to do is one its booted up push the unbrick image to the phone and use rooted adb shell to write it back onto your phone.
Possible hope??
shabbypenguin said:
you wrote the image to the sdcard? i wonder if its because you still have the low level bootloaders that it may not be booting from the sdcard, normally this is done to fix qhusb errored devices. as for restoring the partitions all you would need to do is one its booted up push the unbrick image to the phone and use rooted adb shell to write it back onto your phone.
Click to expand...
Click to collapse
I meant I used the windows tool to write the debrick.img to the sd card. But no dice, the device isn't recognised.
However! I installed a driver clean up tool and now if I plug in the device it is recognized as Android Original ADB Interface.
The LG Flashtools even says the port is ready! But I get the error code "10" "device cannot start, A request for the USB device descriptor failed."
So now I am stuck on that instead lol. This just sucks.
that sucks about the sdcard, it must be because you arent "truly" bricked. sorry i thought it would help ya :/.
What is the driver repair tool you used? I know this thread is old but I'm having the same problem. I was trying to root my E980 and now my computer wont recognize my device. The phone works perfect, its just when I plug it in to the computer it isnt recognized. How can I fix this?
+1
Just wondering if anyone's come across a solution to this besides a sledge hammer... been having the same "Code 10: Device failed to start" when in Download Mode, though Windows finds a driver fine when the phone is stuck on the LG screen... doesn't help much, though, 'cause it won't receive adb commands. I manually installed the LG USB Composite Device driver, which added a modem and a COM port, both of which Windows recognized to be active, but the LG FlashTool USB Viewer showed no open pipes. I'm a relative noob, so please feel free to point out the obvious, like an alternative to adb that the phone can always receive or a way to brick it the rest of the way so the MicroSD trick will work.
I came across this problem like the OP and just wanna let everyone know that you have to use computer with USB 2.0 port then the driver issue would be fixed.