Related
If you haven't tried or seen the Mountek MT5000, you should take a look.
I ordered mine from Amazon for $20 shipped and have ben using it for a few days. I have to say this is one amazing mount. Not only does it fit in the CD slot, but any slot you have anywhere. Using mine at my desk at work and in the car.
Great idea.
Check out a small write up on GoodandEvo
http://www.goodandevo.net/2011/01/mountek-mt5000-mounts-htc-evo-in-cars-cd-player-slot.html
I have one in the car and love it.
thinking about getting another for work.
I got mine about 2 weeks ago, and I love it. I have the Ballistic HC case, and it still fits in the mount. I never thought about using it at work for other slots.
that thing looks awesome, i think i'll be investing in one of these soon
Guys, get this mount. This is the mount to end all mounts. It is so awesome. It installs in like 10 seconds flat. You put your phone on there and just squeeze to clamp it down. It rotates to portrait or landscape, and you can turn the phone to face you if you need to.
I'd been using it for a while with the CD slot, and then today I discovered that it was even more awesome installed on the vent because now I don't even have to look down. The guy who invented this thing is a genius. The only thing better than this mount, in my opinion, is the Palm Touchstone, but that doesn't exist for Evos. :-/
I also think that this mount is great. Such a clever design and the customer service at mountek is really good too.
FYI - You can snip out a gap on the removable bottom mount to make room for a charging cable
very cool idea, and I would free up the vent I am currently not able to blow on my face for this summer lol.
mrquaid said:
I also think that this mount is great. Such a clever design and the customer service at mountek is really good too.
FYI - You can snip out a gap on the removable bottom mount to make room for a charging cable
Click to expand...
Click to collapse
Actually, you can remove the bottom altogether if you want to ... it's removable and pops right off. I've found it unnecessary as the mount grips my Evo just fine in portrait or landscape without it.
My take on the mount
With all the glowing reviews here I'm somewhat hesitant to chime in but:
- if you are thinking this mount is in any way specific to the EVO- it's not; it's a generic sort of think which uses two pads and pressure to hold the sides of your phone.
- while the bottom bit of the holder can be removed, it's essential to do so because your charger will not fit into the phone with it there. It's WAY too much of a pain to remove the phone from it's case just to use this mount and I can't see using the phone without an extended battery.
- if you have an extended battery or a case the mount will basically not work- you may get it "in there" but the phone will be on the edge of the rubber pads and pop out on the first bump or when you try and use the phone (pressing on screen or trying to wake it up with the power button
- they do offer a money back warranty but as with most things these days it would cost me so much in shipping to send it back it's not worth the hassle but I'm sorry I got the thing- useless for my purposes and didn't work for my wife's EPIC either and not just because there's aren't provisions for the slide- it wouldn't hold her phone securely at all and she's caseless with stock battery.
TLDR: maybe a good idea but much flawed in execution. I'd return it if it was cost effective.
I see reviews that state that it works with the extended battery and case, which is perfect for me!
Does anyone know if you can swivel it left and right to change viewer angles?
wasnt said:
... but any slot you have anywhere...
Click to expand...
Click to collapse
WAT?
10chars
tutruong89 said:
I see reviews that state that it works with the extended battery and case, which is perfect for me!
Does anyone know if you can swivel it left and right to change viewer angles?
Click to expand...
Click to collapse
Yes it swivels a bit -- not much but enough to give you a good viewing angle from the driver's seat. You can also rotate it to portrait or landscape depending on your preference.
I have one with an extended battery and it fits fine. Bumps don't knock it loose. I only have to place it a little farther then the middle so it doesn't press the volume buttons.
Sent from my PC36100 using Tapatalk
I don't know what the other guy is talking about, I have the extended battery and case and mine ddoesn't pop out. I'm actually very pleased with it. I did remove the bottom bracket.
I've been waiting for this product to be re-stocked. Apparently, they've been sold out for a while now. Pre-ordered it in May and it finally arrived this weekend. So far so good! Fits my Droid Incredible but the charge port is blocked unless I remove the support bar. The side arms seem to hold snugly without it, but I'll have to shoot them an email and ask about that. Also looks like they've made some mods. The CD blade looks slightly different than the product photo and the tightening wheel is now smaller. I feel pretty good about this purchase. Build quality is higher than I expected. Seems durable too. We'll see how it continues to perform with time...
*****
Wow, I sent them an email and already got a response: "The device rest [support bar] is optional/detachable, and in most cases, the mount can hold your phone without it." So I guess I'm good.
Looks nice, but does it do any damage to the inside of the player? anyone have problems with the player trying to take it as a cd? this might be a great solution for my element.
Sent from my PC36100 using Tapatalk
ghostyroasty said:
Looks nice, but does it do any damage to the inside of the player? anyone have problems with the player trying to take it as a cd?
Click to expand...
Click to collapse
The Mountek MT5000 does not damage the CD player at all.
The blades never touch any part of the disc loading mechanism. It only fits into the slot opening where you then turn the knob just enough to spread the blades to gently hold the MT5000 into place.
If you still have CDs in the player, they can still be used too because the MT5000 doesn't engage any of the player's CD eject or load functions.
would this mount work for the evo 3d?
Sent from my PC36100 using XDA Premium App
It should work for the Evo 3d with no problems.
How many turns is everyone giving the tightening rod? The guy in the video gave it like two turns.. I'm cranking mine a few times.. And it can keep turning, but I thought it might be enough
I bought one a while ago, feels a bit cheap in terms of build quality but it does work as advertised.
I use my charger cable to loop and lock the phone in
Im looking for a cheapo mount for my EVO for my patrol truck...... Stumbled across this chinese thing on ebay...
has anyone bought one or tried one?
http://cgi.ebay.com/CAR-CRADLE-HOLDER-MOUNT-HTC-DESIRE-EVO-4G-HD2-HERO-/150609091884?pt=PDA_Accessories&hash=item2311005d2c
It's been my experience that cheap car mounts just suck, whether it's the vibration and makes the phone bounce up and down, or the thing just falling apart.
I went ahead and bought the HTC official car dock for the EVO and I absolutely love it. Keeps the phone perfectly still and automatically launches the car application when inserted. It's pricey, but you definitely get what you pay for.
gothymp said:
Im looking for a cheapo mount for my EVO for my patrol truck
Click to expand...
Click to collapse
If you can spare the CD player slot of your car, you might want to consider the CD slot mount from Mountek:
www.mountek.com
It's very inventive and works fine.
I got one each for my girlfriend (who has an EVO 4G), her sister (EVO 4G), and my sister (iPhone 4), and they all love it.
I am using the Scoth Reusable rubber sheet. A small 1x1inch piece holds the phone on the flat surface, and with a bigger "pad" it will provide greater security. Plus its not ugly or complicated, just a piece of adhesive rubber that wont leave any residue on the phone.
http://www.scotchbrand.com/wps/port...18H7_nid=3KCF25XQJ8gs0KC1RG50RHglH1V2D8P0NVbl
Well i just ordered it... ill give a good review on it once i have it in hand
I've had the Arkon on Amazon since August with no complaints at all. I thought it might damage the vents with the way it attaches to them but it hasn't bent or twisted them at all yet.
Anyone come across a mount that lets you use the rear camera, for instance drag racing at the track and recording the run?
Sent from my PC36100 using XDA App
I have one of these and really like it.
http://www.goodandevo.net/2011/01/mountek-mt5000-mounts-htc-evo-in-cars-cd-player-slot.html
got it 20% off too at the time, works great but it does cover my radio display up, but i guess that is a sacrifice..
i was looking a while back for a car mount when i had Sirius and i remember running across some mounts that slide into the seams on your dash. Anyone know anything about these? I can't find them and don't remember what they were called. Hell is need be i could probably make one.
I have the siedio one.
Works great, doesn't vibrate and depending how you mount it, you can use your camera.
I love this car mount works for just about anything not just ur evo , i think its up to 5inches so u can use it even with cases and big batterys
http://www.exogear.com/products-exomount-car-mount-holder.html
watch demo video its amazing.
I created my own mount using velcro for vibration and a bit of industrial sound dampening foam rubber modified onto a RAM gps mount for my motorcycle. See the vids at youtube/doitlaynstyle
Sent from my PC36100 using XDA App
jietzer said:
I love this car mount works for just about anything not just ur evo , i think its up to 5inches so u can use it even with cases and big batterys
http://www.exogear.com/products-exomount-car-mount-holder.html
watch demo video its amazing.
Click to expand...
Click to collapse
Just ordered one! Thanks for the link!
Did you order through HTC website?
jietzer said:
I love this car mount works for just about anything not just ur evo , i think its up to 5inches so u can use it even with cases and big batterys
http://www.exogear.com/products-exomount-car-mount-holder.html
watch demo video its amazing.
Click to expand...
Click to collapse
Awesome! So does it really mount to almost any surface and actually hold well? I may have to buy one of these!
Sent from my PC36100 using XDA Premium App
I have a Mountek MT5000, the build feels cheap but it works as advertised. If the ride starts to get rough, expect the phone to jump off the cradle. What I do , is I use the charging cable, loop it on the phone to hold it in place. Ghetto but works.
stanglifemike said:
Awesome! So does it really mount to almost any surface and actually hold well? I may have to buy one of these!
Click to expand...
Click to collapse
Just received my Exomount last night. It really works like it shows on the video. I had it mounted on my windshield on the way to work and right now I have it suctioned to my laminate desk at work holding my Evo while I listen to Google Music. I bought mine from one of the sellers on Amazon for about $25 shipped. My coworker saw it this morning and is going to order one as well.
I turned a few corners at moderate speed and went over some pretty big bumps... the thing did not move one bit.
Holy crap I want an Exomount!
jietzer said:
I love this car mount works for just about anything not just ur evo , i think its up to 5inches so u can use it even with cases and big batterys
http://www.exogear.com/products-exomount-car-mount-holder.html
watch demo video its amazing.
Click to expand...
Click to collapse
So simple yet so awesome!
http://www.monoprice.com/products/p...=10840&cs_id=1084001&p_id=5272&seq=1&format=2
I've had that for a few months, it's great. Super secure, rotates and locks, totally customizable. I really recommend it.
Alright guys, I got this case as its been popular in the comunity and wanted to give it a try...this case is absolutely gorgeous...looks great, feels great and seems to be one of the most protective cases out there that lets you keep the slick look of the device BUT the bad outweights the good... my main concern were the buttons..I got into a couple of rage moments and i believe I developed new muscles in my thumb from trying to press the on/off screen.
Watch the video and make your own decision
Hope this helps you guys!
http://youtu.be/pkHHeVQgNL0
Just commented on your other video haha. You just go out and buy a million cases? Haha. But if you put a piece of paper where the volume buttons and where the power button is. It will help out making them easier to press. Just fyi
Sent from my SGH-T989 using XDA App
I have this case and with extended use the button areas do get softer.
Quality is top notch. And in terms of slipperyness.. its not as bad as glossy cases but definitely does not stick like rubber. This is actually a good thing because when its in your pocket it glides of easy.
Sent from my SGH-T989
yes..its impossible to disagree that the quality is just amazing..cant match it at all ,and the look is just plain great..but for the price tag I really expected a little more R&D and not having to do work arounds to use them comfortably
twolfekc said:
Just commented on your other video haha. You just go out and buy a million cases? Haha. But if you put a piece of paper where the volume buttons and where the power button is. It will help out making them easier to press. Just fyi
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
haha! negative, I get them as gifts or people send them to me to review them and to write an honest opinion..thats why you dont see me lying about the case hehe.
Yeah the paper thingy does work ,but my point was like after normal people (not us phone junkies) get the case, they have to do something else to make it work. And after paying 35 dollars thats just isnt fair . Now if people picked them up for free or shipping only..it hella worth it
I wish they come with a revision because if they do That will be the case i would be sporting for good
Despite the quirks, I can say that the case works. I was climbing stairs in an apartment complex, and my phone covered with this case, fell out of my pocket and dropped about 12 feet in height. Whew.. Thank goodness for this case, it survived... Very happy that I spent money on this case.
thats a mortal drop dude!!!! im glad the phone survived! yeah its a great protective case...again if they fix that little issue it ll b a winner for sure!
I tried the paper thing and three paper would move out of place or just keep the button down.could someone put up a video of how to "mod" this case
Sent from my SGH-T989 using XDA App
Branso07 said:
I tried the paper thing and three paper would move out of place or just keep the button down.could someone put up a video of how to "mod" this case
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
and lets send it to D3o themselves hehehe
I got the all black one, and of course was before this video was posted...
What I ended up doing was taking an exacto blade and cutting along the wide parts of the buttons near where the mold for each one starts. The buttons now press with ease and the cuts are not visible.
I tried the deal with the paper under the buttons first, but it made the buttons too easy to press, they phone kept getting turned on in my pocket.
how easy was cutting around?
cutting through was easy, you just don't want to cut all the way around the button.
You only cut the longest sides of the buttons. There was an illustration somewhere in regards to the same thing.
servbotx said:
cutting through was easy, you just don't want to cut all the way around the button.
You only cut the longest sides of the buttons. There was an illustration somewhere in regards to the same thing.
Click to expand...
Click to collapse
Cool I'm going to try that ! Thanks
Sent from my SGH-T989 using xda premium
I love this case! I have the 2 tone black back and gray front. This may sound crazy, but I'm thinking about taking it to a skate shop and having grip tape installed on the back part.
Nice review, a bit long though to make your point. I have this case and its really nice. I personally love it. I don't mind the button issue though, I have adapted. It does get a bit annoying at times, but that's only when flashing Roms in CWM. I feel perfectly safe and not afraid to drop my phone. I feel the more careless I am the less I tend to drop it. I bought mine online for $14 so it was a great deal.
There is enough hate in the world. Why can't we all get along here ...?
Usually my reviews are the same length and I try to attack the same points so I can have uniformity.
I love the case and after modding it it def went up in my book however the average Joe user won't know how to mod the case
Got my d30 case a couple months ago for 5 bucks, i dont use it anymore more but it developed a crack in the back of the case and yeah buttons were kinda hard to press but you get used to it
Sent from my SGH-T989 using xda premium
AznSwag said:
Got my d30 case a couple months ago for 5 bucks, i dont use it anymore more but it developed a crack in the back of the case and yeah buttons were kinda hard to press but you get used to it
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
ive also had the case since basically it came out and it has also developed multiple cracks on the back. one runs from the usb port up about an inch, and others are where the buttons are, though smaller. this might be from taking it off and on every once in a while.
sighs. i have a spare one in black though, but i like this white one.
I have had mine now for 3 weeks and I love the case and hate the buttons. I am going to try the mod and see if that helps. The buttons are the only bad thing about this case.
I have never been a fan of car mounts, I just hate putting stuff on my window and the suction cups eventually fail. I've seen universal mounts that mount on your air vents but those are big and bulky and don't have the OEM look and feel. So I decided to make my own...
************UPDATE 3-10-2012************
I decided to post an update to this since I received lots of positive feedback on YouTube and you guys contributed some great ideas. Thanks to @brycetrem for posting this original idea, I decided to take it even a step further. I must say the results are awesome, take a look at Version 2.0!
very very nice job! Clean install, and great youtube video!
Sent from my Galaxy Nexus using Tapatalk
excellent work and video!
Sent from my Galaxy Nexus using xda premium
Nice .
That's bad ass. Nice job!
Sent from my Galaxy Nexus using xda premium
Thanks, I just went out to the store and realized how awesome Netflix looks. Specially with the large screen on the Galaxy Nexus with 4G connection its the best! What makes it good is it sits low enough where a cop can't see you watching a movie I like it even more
Sent from my Galaxy Nexus using XDA App
What makes it good is it sits low enough where a cop can't see you watching a movie I like it even more
Click to expand...
Click to collapse
Fair warning, if I pass you going down the road and you're watching a movie in the front seat, I will be running you off the road and into the ditch.
Seriously man, you don't need the cops to tell you that kind of distraction is really ****ing stupid.
xaronax said:
Fair warning, if I pass you going down the road and you're watching a movie in the front seat, I will be running you off the road and into the ditch.
Seriously man, you don't need the cops to tell you that kind of distraction is really ****ing stupid.
Click to expand...
Click to collapse
Lol with the exception of my Q5 all the vehicles I have owned have had video playback. As a matter a fact, my first car in 1999 had a custom monitor. Turning the channel on the radio is a distraction. You should YouTube "Vic Gundotra Mercedes". So it doesn't matter if your watching TV or not.
Sent from my Galaxy Nexus using XDA App
I got the car mount that fits in the CD player. Works awesome, best I've ever owned for any device. Very high quality. Easy to use. Vertical or horizontal. Also CD player in my car is at just the right height, I don't like the mounts for dash or windows.
http://www.amazon.com/gp/aw/d/B004E5W3D4/ref=mp_s_a_1?qid=1326048449&sr=8-1
Sent from my Galaxy Nexus using xda premium
Here are a few pictures:
https://plus.google.com/photos/112484075632291866004/albums/5695355293357313217
brycetrem said:
Here are a few pictures:
https://plus.google.com/photos/112484075632291866004/albums/5695355293357313217
Click to expand...
Click to collapse
That looks great! How well does it fit with your phone? I was never a fan of universal mounts, just because they tend to be bulky since they have to be a "one size fits all" solution. I prefer more of an OEM approach where its as slim as possible. I do like your setup though, thanks for sharing +1
Sent from my Galaxy Nexus using XDA App
Honestly it fits nice and snug. Also great because I can use any size case I want. The mount rotates 360 degrees and has padded clamps for the phone with an easy access eject button. For being an unheard brand, its definitely high quality and extremely durable/sturdy. I'd recommend it to anyone with a smart phone.
Sent from my Galaxy Nexus using xda premium
brycetrem said:
Honestly it fits nice and snug. Also great because I can use any size case I want. The mount rotates 360 degrees and has padded clamps for the phone with an easy access eject button. For being an unheard brand, its definitely high quality and extremely durable/sturdy. I'd recommend it to anyone with a smart phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I've used the Mountek mounts now for nearly 2 years. Had it for my droidx. Also have other family members using it for the iPhone and GPS devices, etc. They work great and also allow a certain degree of angulation - maybe 15 degrees or so in addition to the 360 degree swivel feature. Can be used with any case and also leave the camera free for use if required.
That looks really good. I think I'm going to try and do something like that with my Pro Clips mount. I want to order the Nexus holder, but at $60 including shipping the thought of paying that makes me wanna puke.
I like the looks of the mount by the OP but with a case on the phone, it won't work. I bought the Arkon unit a few months ago and it is nice but big. The CD slot mount looks neat but does it does it hurt the slot opening in any way? There is usually a felt lining on the cd opening?
ellisz said:
The CD slot mount looks neat but does it does it hurt the slot opening in any way? There is usually a felt lining on the cd opening?
Click to expand...
Click to collapse
I've got the same question. And I assume the CD player still functions as well? For $20 I might have to order one.
Sent from my Galaxy Nexus using XDA App
great work however having cold AC going over the hot CPU or GPU is not a good idea because condensation can build up and lead to corrosion over time.
Its why people don't cool there desktop computers with external air conditioners, if its just the fan blowing its fine.
But honestly that looks really nice good work
Sent from my Galaxy Nexus using xda premium
NIK516 said:
great work however having cold AC going over the hot CPU or GPU is not a good idea because condensation can build up and lead to corrosion over time.
Its why people don't cool there desktop computers with external air conditioners, if its just the fan blowing its fine.
But honestly that looks really nice good work
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Actually, The AC is de-humidified. That is why many de-foggers also turn the AC on with the heat to clear the windshield.
The CD player will not be harmed. There are 4 teeth that stick into the CD player only about a half an inch, not far enough to hurt the CD player. There is a knob on the bottom of the unit that you twist to tighten the grip of the teeth. Basically when tightening, two teeth are forced up and two down to make sure the harness is sturdy. The teeth are basically a soft plastic.
Sent from my Galaxy Nexus using xda premium
Wicked4u2c said:
I have never been a fan of car mounts, I just hate putting stuff on my window and the suction cups eventually fail. I've seen universal mounts that mount on your air vents but those are big and bulky and don't have the OEM look and feel. So I decided to make my own...
Click to expand...
Click to collapse
Is there a way to remove the plastic ball w/ the screw and just use a ball joint mount with this? in the video it appeared to be a plastic ball inside the joint with the screw, and the gps mount you used had the ball adapter on it...
push2flush said:
Is there a way to remove the plastic ball w/ the screw and just use a ball joint mount with this? in the video it appeared to be a plastic ball inside the joint with the screw, and the gps mount you used had the ball adapter on it...
Click to expand...
Click to collapse
That's what I'm going to try. Bracketron offers several different AMPs to ball mount plates. I'd post a link but this is literally my first post.
I'm hoping one of those ball plates will fit into the GNex mount. I also bought short (2-3") 3.5mm audio and micro USB charging cables that I will then try bonding/fiberglassing to the cradle so I don't have to plug them in every time. And then cutting the top of the stupid mount off so I can slide the phone in from the top
So to kick it off, I've got two "pouches" that are supposed to be watertight. I haven't checked if they are actually water proof, but I can say something about the fit (or misfit).
1. Had the Hagløfs Watatait for the S1. Plastic made it impossible to insert the phone. I had to use a metallic case on the phone to get it in the pouch.
The S3 have the same problem. Its slightly less "clingy", but edges on phone get stuck before fully inserted. There is no room for a phone with case.
2. Got the Overboard case from mobilefun. S3 slides nicely into the pouch. Locking feels safe enough, to the point of being over-engineered. The clear plastic window is slightly small, making it hard to pull down the notification menu. Also a bit fiddly to find the power and volume buttons.
Its also a very tight fit. I suspect its made for the iphone, with room for protection for that phone. Any case that offer enough protection for the S3 make it too big for this pouch.
So anyone else have a watertight pouch case they want to share with the rest of us?
I'm a biker, after much trial and error I found the Northcore surfing cases and bought one for my old phone (Desire). Got my S3 today and while tight it does fit the bare phone with no problems and leaves it easily operable. I usually have the phone strapped to my left forearm and have some capacitive thread stitched into the index finger of the right glove and a bluetooth headset for sound. Add in Tasker to deal with automation and it makes the phone really easy to use.
This is the beastie:
CLICKY
I'm hoping Liquidpel will be available for this device. http://www.liquipel.com/
Basically they coat the entire phone + internals with hydrophobic material, that way even when water gets into the phone, it remains working.
I used a waterproof pouch when I was on my last cruise. Put my epic touch in it and went snorkeling for hours with it in my pocket. It was under water the whole time, no leaks. I bought it from Amazon.com.
Sent from my SPH-D710 using xda premium
tarmacsurfer said:
I'm a biker, after much trial and error I found the Northcore surfing cases and bought one for my old phone (Desire). Got my S3 today and while tight it does fit the bare phone with no problems and leaves it easily operable. I usually have the phone strapped to my left forearm and have some capacitive thread stitched into the index finger of the right glove and a bluetooth headset for sound. Add in Tasker to deal with automation and it makes the phone really easy to use.
This is the beastie:
CLICKY
Click to expand...
Click to collapse
The tight fit is a problem, to be ideal, it should be room for something like Otterbox defender or Ballistic-whatever-its-name-was. A drop in one of the pouches with bare phone is nearly as bad as a drop of the bare phone, and SIII doesn't take a lot of abuse on its own.
So looking for something with a bit more room, that still have decent opening to operate the screen.
I suspect you'll have problems finding anything that big, the S3 isn't a small handset to start with and by the time it's cased up it doubles the bulk.
Good luck :good:
If your looking for waterproof bag i have been using a type of waterproof ziplock for years. its called Aloksak. I have swam across rivers a few time and my gear in it is always dry.
Its certified waterproof to 60 metres and tested by the Navy Diving Unit.
I got mine through amazon and there are alot of sizes some even can fit a rifle. I have some that are really beat up scratches and stretch marks from sharp object and they are not even leaking.
Screen is 100% usable and its dirt cheap.
I am looking for a decent water proof case myself. I have ran across the drycase from drycase.com and have contacted them in an attempt to verify that the s3 will fit in the standard case without having to get the tablet sized one.
It does not offer drop protection however they say its rated to 100 feet (30 meters) so i should be able to take this on a 40 foot reef dive.
I really want to get rid of my camera housing as its for an old sony 5mp camera that barely works anymore.
Drycase
I just received my Drycase from Amazon. So far here are my thoughts on it with the S3. I have never owned a waterproof case like this before so perhaps some of these issues are common to cases like this. Keep in mind I have only had the case for a couple hours so these are just my initial impressions.
1. It is a little difficult to get the phone into and out of the case. It sticks to the plastic sides of the case.
2. Although the Drycase sales rep told me that the S3 would fit in the case and it does for the most part, it is hard to get it far enough into the case so that you can connect the headphone adapter and still have it be out of the way of the top black flap and closing mechanism.
3. Once the phone is in the case and the air is pumped out, the plastic sides of the case fit pretty tight to the body of the phone. This is nice as it makes the screen easy to see, however it also makes the volume and power buttons on the sides of the case difficult to press. I was trying to use the case to take underwater photos and video and because you can not use the touch screen when underwater I mapped the volume down button to the camera shutter, but it was difficult to press this button when the phone was in the case.
4. When the headphone/microphone jack inside the bag is connected to the phone any sound you record with a video will not be recorded since I assume the internal microphone is disconnected. So if you want sound with video you would need to either not plug in the internal cable or connect an external mic. Not a big deal for shooting underwater but if you are going to be moving between above and below water you may want to just leave this cable disconnected.
Anyone seen or tried this pouch?
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=271017216379
I like that it has both an armband and lanyard.
komugi said:
I'm hoping Liquidpel will be available for this device. http://www.liquipel.com/
Basically they coat the entire phone + internals with hydrophobic material, that way even when water gets into the phone, it remains working.
Click to expand...
Click to collapse
That's super cool. If you look they do have it for the s3.
Sent from my SCH-I535 using xda app-developers app
unique77 said:
That's super cool. If you look they do have it for the s3.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I've seen this before. Some people swear by it.
I have this
http://www.amazon.com/gp/product/B004QWY644/ref=oh_details_o04_s00_i00
and this
http://www.amazon.com/gp/product/B008D532ZO/ref=oh_details_o00_s00_i00
works great!!
I have been able to swim around in the pool, go underwater and still hear my music, can make calls too, need to keep the mic out of the water, otherwise they cant here you.
Also , FYI, when you are under water, you cant use the phone well, it just wont pick up your print.
I have decided to start surfing and never go anywhere unless I have my phone and headphones. I have been debating on ordering this. http://pages.ebay.com/link/?nav=item.view&id=350585644786 I think music might help with the frustration of learning.
Sent from my SPH-L710 using xda premium
crzy619 said:
I have decided to start surfing and never go anywhere unless I have my phone and headphones. I have been debating on ordering this. http://pages.ebay.com/link/?nav=item.view&id=350585644786 I think music might help with the frustration of learning.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
yea, I got something like that, the H2O headphones are nice because they have a Mic on them, and the bag has compression clips on snapps, I love mine!
eatonjb said:
I have this
http://www.amazon.com/gp/product/B004QWY644/ref=oh_details_o04_s00_i00
and this
http://www.amazon.com/gp/product/B008D532ZO/ref=oh_details_o00_s00_i00
works great!!
I have been able to swim around in the pool, go underwater and still hear my music, can make calls too, need to keep the mic out of the water, otherwise they cant here you.
Also , FYI, when you are under water, you cant use the phone well, it just wont pick up your print.
Click to expand...
Click to collapse
How do you get the headphone line out of the OB pouch? The one with integrated headphone jack looks interesting. Maybe the Note-sized pouch is big enough for a S3 with a Ballistics case. Worth a try?
I forgot what its called but I seen a website that will take apart your phone and water proof the components so you don't have to have a waterproof case on. Just take the bare phone swimming with you n you're good
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------
I remember the starting price for it is like $60 or $70 tho
Sent from my SCH-I535 using Tapatalk 2
xXJay_RXx said:
I forgot what its called but I seen a website that will take apart your phone and water proof the components so you don't have to have a waterproof case on. Just take the bare phone swimming with you n you're good
Sent from my SCH-I535 using Tapatalk 2
---------- Post added at 10:21 AM ---------- Previous post was at 10:21 AM ----------
I remember the starting price for it is like $60 or $70 tho
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I know where you saw it: a couple posts up in this thread..
scarrmrcc said:
I know where you saw it: a couple posts up in this thread..
Click to expand...
Click to collapse
Wow sorry lmao I thought it was a different thread. I guess I shouldn't be typing responses when I'm extremely tired -.-
Sent from my SCH-I535 using Tapatalk 2
Snuble said:
How do you get the headphone line out of the OB pouch? The one with integrated headphone jack looks interesting. Maybe the Note-sized pouch is big enough for a S3 with a Ballistics case. Worth a try?
Click to expand...
Click to collapse
THERE IS A wire on the inside that connects to the external one. I'musing it now
== Yea.. I tapped that!