Develop Bugs

Mountek MT5000

If you haven't tried or seen the Mountek MT5000, you should take a look.
I ordered mine from Amazon for $20 shipped and have ben using it for a few days. I have to say this is one amazing mount. Not only does it fit in the CD slot, but any slot you have anywhere. Using mine at my desk at work and in the car.
Great idea.
Check out a small write up on GoodandEvo
http://www.goodandevo.net/2011/01/mountek-mt5000-mounts-htc-evo-in-cars-cd-player-slot.html

I have one in the car and love it.
thinking about getting another for work.

I got mine about 2 weeks ago, and I love it. I have the Ballistic HC case, and it still fits in the mount. I never thought about using it at work for other slots.

that thing looks awesome, i think i'll be investing in one of these soon

Guys, get this mount. This is the mount to end all mounts. It is so awesome. It installs in like 10 seconds flat. You put your phone on there and just squeeze to clamp it down. It rotates to portrait or landscape, and you can turn the phone to face you if you need to.
I'd been using it for a while with the CD slot, and then today I discovered that it was even more awesome installed on the vent because now I don't even have to look down. The guy who invented this thing is a genius. The only thing better than this mount, in my opinion, is the Palm Touchstone, but that doesn't exist for Evos. :-/

I also think that this mount is great. Such a clever design and the customer service at mountek is really good too.
FYI - You can snip out a gap on the removable bottom mount to make room for a charging cable

very cool idea, and I would free up the vent I am currently not able to blow on my face for this summer lol.

mrquaid said:
I also think that this mount is great. Such a clever design and the customer service at mountek is really good too.
FYI - You can snip out a gap on the removable bottom mount to make room for a charging cable
Click to expand...
Click to collapse
Actually, you can remove the bottom altogether if you want to ... it's removable and pops right off. I've found it unnecessary as the mount grips my Evo just fine in portrait or landscape without it.

My take on the mount
With all the glowing reviews here I'm somewhat hesitant to chime in but:
- if you are thinking this mount is in any way specific to the EVO- it's not; it's a generic sort of think which uses two pads and pressure to hold the sides of your phone.
- while the bottom bit of the holder can be removed, it's essential to do so because your charger will not fit into the phone with it there. It's WAY too much of a pain to remove the phone from it's case just to use this mount and I can't see using the phone without an extended battery.
- if you have an extended battery or a case the mount will basically not work- you may get it "in there" but the phone will be on the edge of the rubber pads and pop out on the first bump or when you try and use the phone (pressing on screen or trying to wake it up with the power button
- they do offer a money back warranty but as with most things these days it would cost me so much in shipping to send it back it's not worth the hassle but I'm sorry I got the thing- useless for my purposes and didn't work for my wife's EPIC either and not just because there's aren't provisions for the slide- it wouldn't hold her phone securely at all and she's caseless with stock battery.
TLDR: maybe a good idea but much flawed in execution. I'd return it if it was cost effective.

I see reviews that state that it works with the extended battery and case, which is perfect for me!
Does anyone know if you can swivel it left and right to change viewer angles?

wasnt said:
... but any slot you have anywhere...
Click to expand...
Click to collapse
WAT?
10chars

tutruong89 said:
I see reviews that state that it works with the extended battery and case, which is perfect for me!
Does anyone know if you can swivel it left and right to change viewer angles?
Click to expand...
Click to collapse
Yes it swivels a bit -- not much but enough to give you a good viewing angle from the driver's seat. You can also rotate it to portrait or landscape depending on your preference.

I have one with an extended battery and it fits fine. Bumps don't knock it loose. I only have to place it a little farther then the middle so it doesn't press the volume buttons.
Sent from my PC36100 using Tapatalk

I don't know what the other guy is talking about, I have the extended battery and case and mine ddoesn't pop out. I'm actually very pleased with it. I did remove the bottom bracket.

I've been waiting for this product to be re-stocked. Apparently, they've been sold out for a while now. Pre-ordered it in May and it finally arrived this weekend. So far so good! Fits my Droid Incredible but the charge port is blocked unless I remove the support bar. The side arms seem to hold snugly without it, but I'll have to shoot them an email and ask about that. Also looks like they've made some mods. The CD blade looks slightly different than the product photo and the tightening wheel is now smaller. I feel pretty good about this purchase. Build quality is higher than I expected. Seems durable too. We'll see how it continues to perform with time...
*****
Wow, I sent them an email and already got a response: "The device rest [support bar] is optional/detachable, and in most cases, the mount can hold your phone without it." So I guess I'm good.

Looks nice, but does it do any damage to the inside of the player? anyone have problems with the player trying to take it as a cd? this might be a great solution for my element.
Sent from my PC36100 using Tapatalk

ghostyroasty said:
Looks nice, but does it do any damage to the inside of the player? anyone have problems with the player trying to take it as a cd?
Click to expand...
Click to collapse
The Mountek MT5000 does not damage the CD player at all.
The blades never touch any part of the disc loading mechanism. It only fits into the slot opening where you then turn the knob just enough to spread the blades to gently hold the MT5000 into place.
If you still have CDs in the player, they can still be used too because the MT5000 doesn't engage any of the player's CD eject or load functions.

would this mount work for the evo 3d?
Sent from my PC36100 using XDA Premium App

It should work for the Evo 3d with no problems.
How many turns is everyone giving the tightening rod? The guy in the video gave it like two turns.. I'm cranking mine a few times.. And it can keep turning, but I thought it might be enough

I bought one a while ago, feels a bit cheap in terms of build quality but it does work as advertised.
I use my charger cable to loop and lock the phone in

My favorite car mount

http://www.bestbuy.com/site/Rocketf...lack/9953877.p?id=1218200308619&skuId=9953877
Comes with a mount for a bike AND a car. Leave the mounts and move the clip from bike to car. Would work for virtually any phone so you're not buying a new mount every time you switch phones. Holds the phone very tight.

I have that mount too.
I personally hate it.

And why is that?
Sent from my Evo running CM7

The main reason is because the long arm produces tons of vibration

This is the one I have. And I love it. Works great with almost any newer phone too.
http://www.daydeal.com/product.php?productid=44475&cat=4995

Jadams3005 said:
This is the one I have. And I love it. Works great with almost any newer phone too.
http://www.daydeal.com/product.php?productid=44475&cat=4995
Click to expand...
Click to collapse
ooooo i like this one

Hmm. Never noticed I guess. Or I'm on smooth roads.
Sent from my Evo running CM7

Jadams3005 said:
This is the one I have. And I love it. Works great with almost any newer phone too.
http://www.daydeal.com/product.php?productid=44475&cat=4995
Click to expand...
Click to collapse
does this switch the phone into car dock mode?

This is what I have: I love Proclip
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512176-18252.aspx

Agfadoc said:
This is what I have: I love Proclip
http://www.proclipusa.com/brodit-de...d-cigarette-lighter-adapter-512176-18252.aspx
Click to expand...
Click to collapse
What happens when you inevitably upgrade phones?
Sent from my Evo running CM7

donisewell said:
http://www.bestbuy.com/site/Rocketf...lack/9953877.p?id=1218200308619&skuId=9953877
Comes with a mount for a bike AND a car. Leave the mounts and move the clip from bike to car. Would work for virtually any phone so you're not buying a new mount every time you switch phones. Holds the phone very tight.
Click to expand...
Click to collapse
I had a mount similar to that, using the vent and the damn thing gotten loose after a while so that the Evo would face left or right depending in the turns I would be making in the car.
The pro clip looks interesting but can one use it with otterbox?
Sent from my PC36100 using XDA App

Not much can be used with an otterbox. Also the one I posted isn't a vent mount. I put mine on the windshield.
Sent from my Evo running CM7

I did this when I first got my Evo in June and the same set-up is still working lovely.
http://forum.xda-developers.com/showthread.php?t=774708
I'll be carrying this over to my next phone (Evo 3D) as it is truly universal for any phone. All I would need is a cheap case that the phone clips onto, stick some new velcro onto it and I'd be done.
I absolutely love it.

Ive been using a griffin mount designed for the Iphone, one arm on top, two on the bottom the one that expands or contracts to hold Ipod touch through Iphones.
Fits an Evo stock w/ no case. Fits an Evo w/ a Seido case (not extended battery) by removing the rubber cups in the bottom arms.

I personally just got a universal mount that clips to the air vents for $3, love it.
Sent from my PC36100 using XDA Premium App

http://www.amazon.com/SoundGate-M2-...1_fkmr1_2?ie=UTF8&qid=1302651026&sr=8-2-fkmr1
Someone posted about this when the Evo first came out. I have had it forever with the heat of Florida not effecting it.
The only downside is sticking a little tab to the back of the phone, but it sticks nicely to a case. If you buy it you may want to consider some extra tabs. Amazon doesn't sell those you have to buy them through wired for less.

The Perfect Vehicle Dock That Works With A Case?

In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?

SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.

Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
Thanks, never seen one that slides into the CD slot. Btw...that link said for iPhone 4S.

SamsungVibrant said:
Any suggestions?
Click to expand...
Click to collapse
http://www.slipgripcarmounts.com/Galaxy-S-III-I9300_c_27331.html
And chose one for you. I've ordered this one http://www.slipgripcarmounts.com/Sl...Using-OtterBox-Commuter-Case---_p_130841.html yesterday cause I've had the same one for my Fascinate for almost 2 years. Perfect fit and very good quality.

Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That's really cool!

Maverick777 said:
I got this guy:
http://www.ebay.com/itm/160825622184?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Goes in the CD player. I wanted something that wasn't a windshield mount.
Click to expand...
Click to collapse
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4

Best car holder I've ever had!
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/

I can't post pics/links but I followed Lifehacker's guide to making a car mount out of office supplies (site should be easy to find with that information). It works surprisingly well, even with the size of the S3 and the fact that my vehicle's vents aren't perfectly suited for the application. I thought it'd be kind of ghetto but it's hidden while in use and easy to remove and stash away when not in use.
I'll make a thread with pics once I have enough posts.

I got this one: http://www.amazon.com/SLIM-GRIP-WIN...CAR-STEREO/dp/B004H4FN6Q/ref=cm_aya_orig_subj
http://forum.xda-developers.com/showthread.php?t=1769055
Take your time and look around. There's plenty of car mounts that will fit this phone with a case.

Seems like most are the suction cup kind

will work for any phone even tablets
Sorry long time forum reader but first time posting. I can't post a link but search "soundgate m2 car mount"
You can probably find them cheaper. Used my for the og dinc for 2 years. I put the disc on my case instead of the phone. But I would have no reservations to put it directly on the phone as the disc is extremely unobtrusive. Just clean the spot you want to mount the arm really well with included wipe or rubbing alcohol. The arm mounts with a 3m adhesive pad and folds almost flush when not in use. Very slick. Put the discs on anything you want to dock to the arm. I forget how much weight it can handle but I saw a tablet being used as well. Sorry tried to upload pictures and after an afternoon of searching the forums on how to do it, i still cant get it. Just google "soundgate m2 car mount" you wont be dissapointed.

I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium

lynseyw said:
I have this one. I love it. Works with any case, holds tight. I have mine in the vents. http://www.breffo.com/collections/spiderpodium
Click to expand...
Click to collapse
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.

SamsungVibrant said:
That looks interesting, never seen that before. How do you put that in your vent? Looks like it wasn't designed for that.
Click to expand...
Click to collapse
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too

lynseyw said:
you just kinda put it in the vents, and then bend it down. works great! It really stays put too. Check out the gallery section on the site, there are other pics of it in the vents. Got one for a friend and he loves it. It really does hold tight in the vent, even more so then ones designed for the vent. Easy to take out too
Click to expand...
Click to collapse
Can I order if I live in the U.S.? Also I don't see the gallery.

lexluthor said:
That looks really cool. Does it go it and out of the CD player easily? Do you just leave it there or is it easy enough to quickly plug in when you want?
Does it still "see" the satellites well enough from the lower position in the car?
I assume you can confirm the GS3 fits well in it even though it says it's for iphone?
Anyone know of other CD mounts to compare to?
Amazon review for this one you got are generally very good.
http://www.amazon.com/Mounteks-Universal-Hands-Free-Devices-Magellan/dp/B004E5W3D4
Click to expand...
Click to collapse
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related

Maverick777 said:
It goes in very easy. It only takes a few seconds to install. It holds the S III securely even with a case on it.
Here's a video:
http://www.youtube.com/watch?v=B8uy-XfhEqQ&feature=related
Click to expand...
Click to collapse
Does it hold the phone in the vertical position, or only horizontal?

RubenRybnik said:
Don't know if people just don't know about these or just don't like them. I got mine back in February and used it on my old E4GT and now the S3, I absolutly love it! The key is, for me anyways, getting a TPU case( always use TPU so no biggie there ) take an exacto knife and cut a perfect sized cut out for the tiny magnet. If you do it correctly the looks isn't bad at all( use the small magnet, works fine for me ) and more importantly it wont 'wobble' on the table, lays flat. Sorry don't have any pics of my old setup and haven't cut out my new one yet. Also, nice that we have replaceable back covers in case you're worried about it marring up the back if you want to remove it later.
As far as construction quality, magnet hold strenght both are superb, haven't hadd one inceidentl fall off the holder. Also magent doesn't seem to interfer with wifi or cell at all. NFC I haven't tested yet, but my suggestion would be to mount it towards the top side of the case away from the battery( like were the carrier logo is on the back )
Anyways just my 2 cents, check out youtube they have a couple good reviews of it on there.
http://eshop.tetrax.us/
Click to expand...
Click to collapse
wow that's nice! Why did you have to cut out a hole in your case, the link says it comes with a case (I'm assuming with the magnet attached)!

SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
ProClip. It is a little more money, but well worth it. I would get the proper mount for your vehicle (vent or side mount) and the adjustable phone mount so you can use it with a case. The also make a clip so you can move the mount from car to car.
Sadly, mine was recently stolen, but they offered me a discount because of my loss.
So I created a ghetto version as a sort of joke in exchange.
http://m.youtube.com/watch?v=jH3XoLqfXsY
www.proclipusa.com

SamsungVibrant said:
In search of a vehicle dock that will accommodate the size of the Galaxy S III with a case.
Preferably one that fits in the heating/AC vents, or mounts on the front of your dashboard and not on top of the dashboard. I guess one without the suction cup.
Going to be mainly used for Navigation.
Any suggestions?
Click to expand...
Click to collapse
I use this one and I love it.. http://www.amazon.com/MSW-Exogear-Exomount-Universal-Mount/dp/B004Z8ZLOS/ref=sr_1_1?ie=UTF8&qid=1342868939&sr=8-1&keywords=exogear+car+mount

Car Mount/Docks

I've been searching high and low for a non-generic car mount/dock and I think I might have found something that will work. I just ordered the Motorola Atrix HD dock from amazon.
(link blocked)
Dimensions seem right..
Atrix; 5.26 x 2.75 x .33
Sprint Optimus G 5.19 x 2.71 x .33
I'll report back in two days when it gets here.
Hopes this helps....has anyone else found anything else that will work?

I have the 2011 model of the Sprint Universal Mount. With the Otterbox, this thing BARELY fits. But it still works very nicely
2012 model link is here

Yeah....saw that, and looked at a number of the "universal" mounts, but really wanted something that I could truly "dock" my phone into. I'm in and out of my car a lot during the day and don't want to hassle with plugging in the power cord each and every time. Thanks for the input.

NEGATIVE on the MOTOROLA ATRIX HD case....usb doesn't line up. darn.

Tetrax
Is anybody using any of the Tetrax mounts with the LGOG? (The system is preventing me from posting the hyperlink to the Tetrax site here, but it is tetrax.com.) I love their simplicity but am not sure I want to paste a disk to the back of my phone. If you have done this, can you comment on how you like it? Thanks.

Here is a good looking car mount for the LGOG.
http://www.ebay.com/itm/LG-OPTIMUS-...305639?pt=PDA_Accessories&hash=item1c2e0729a7

If you don't need to have the phone charger automatically plugged in, I highly recommend this mount. You've never known convenience until you've put the phone in and take it off with only one hand :fingers-crossed:. Not to mention the it will stick to your car's dash (hard plastic parts preferred, as it will leave an indentation on soft plastic)

jat255 said:
ryocho, have you used this with the Sprint LGOG? I'm thinking about getting it, but want to make sure it fits and doesn't hit any of the volume/power buttons. They also have this one that is for the Galaxy Note. I wonder if it would fit better there?
Click to expand...
Click to collapse
Yes I am using it right now, with this case, it fits fine with just a little bit of wiggle room to spare. For sure the Galaxy Note one will fit if you plan on getting a thick case like otterbox, but it might be too wide if you decided to go without a case?

Merk07 said:
Is anybody using any of the Tetrax mounts with the LGOG? (The system is preventing me from posting the hyperlink to the Tetrax site here, but it is tetrax.com.) I love their simplicity but am not sure I want to paste a disk to the back of my phone. If you have done this, can you comment on how you like it? Thanks.
Click to expand...
Click to collapse
I love Tetrax but could not get anything to stick to the back of the phone. I'm sure if you have a case you will be fine.

I grip
Fits snugly and suction cup is awesome. I have the body glove tatic case on my LGOG in the pic
Sent from my Nexus S 4G using xda app-developers app

djsamthrax said:
...
Click to expand...
Click to collapse
The lower right corner grip doesn't seem to fit...

It holds the phone snuggly. Looks better vertically however
Sent from my LG-LS970 using xda premium

djsamthrax said:
I grip
Fits snugly and suction cup is awesome. I have the body glove tatic case on my LGOG in the pic
Sent from my Nexus S 4G using xda app-developers app
Click to expand...
Click to collapse
lmao, that doesn't fit at all

Kensington iPhone mount is the best i've ever found. Simple and snug. Worked for my EVO and fits the new Optimus G.
Model:K39256US

jbcb713 said:
Kensington iPhone mount is the best i've ever found. Simple and snug. Worked for my EVO and fits the new Optimus G.
Model:K39256US
Click to expand...
Click to collapse
That's what I had previously with my old phone. Unfortunately it doesn't work with the OG with case on. Plus the arm is too long which cause a lot of vibration when driving.

Clingo
I have the clingo and it works great with the otter commuter case

Had the Clingo too, bought it when it first came out. It worked well at the beginning, but after a few months in the summer heat (Southern California) the gel starts to degrade and start to leave a sticky residue on the back of my phone case. Got a replacement gel pad from Clingo, same thing happen by the next summer.
Yes, I've tried a lot of car mount options. Still looking for the perfect one (that doesn't cost something ridiculous like $80)

Here is the best I've found...
Brackretron
Takes some mounting and such, but definitely the best finished product...

ProClip Universal
I'm thinking of ordering one from ProClipUSA. [sorry, I'm too nube to be allowed to post a link...] In the past I've used their mounts for my old Garmin Nuvi and later for my HTC EVO 4G (the WiMax model).
Unlike those mounts, which were excellent and solid as hell, the two available are not full custom for the Optimus. And I really loved that my EVO's mount also provided power when it was docked. I rarely bothered explicitly wall charging the EVO as it always got topped off during the office commutes.
Still... with a few tweaks for the Optimus' dimensions it might be enough for a secure mount. For long trips it looks like I should be able to power it with the car 12V charger from the bottom opening.

This is what I have and it is the best mount I have ever used. Iotte easy flex 2
http://www.newegg.com/Product/Product.aspx?Item=N82E16875986198

Best Car Mount I've used yet...and it's $7.

Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.

Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
I love this thing, it grips the device great, and the suction cup will go almost anywhere you want. I have mind suctioned to the top of my dash of my 08 dodge caliber. Even tho the dashboard is textured with some pretty deep ridges it sticks great!
Only con i would give it is that the grip is a little too tight, making one hand operation difficult. you can remove the device from the mount with one hand, however installing the phone into it usually requires use of your second hand to open the drip far enough. However it is a comfort knowing that it moto x isn't going to fall out.

SubliminalME said:
the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Teksu said:
Looks nice, thought i would share the one i am using right now
http://www.shopandroid.com/aduro-u-grip-universal-car-mount/3AA14505.htm
I found it locally, but for the same price.
Click to expand...
Click to collapse
My local Costco was selling a 2 pack of mounts that looked identical to this for $25 (after $5 instant savings) about 2 months ago. I'm not sure if they still have them, but of they do they aren't prominently displayed.
Sent from my Nexus 7 using Tapatalk

I think it would fit, actually.
Sent from my XT1049 using Tapatalk

Has it fallen off on you?
SubliminalME said:
Hey folks,
Not sure if you're familiar with monoprice, but if you aren't...you should be. I've been buying things like tv mounts and audio cables from them for a LONG time now...since back when HD TVs first came out and people would want $200 for a wall mount and another $100 for an HDMI cable.
Anyway, I was looking for some filler the other day, when I bought a new tv mount and needed to hit a certain point to use a coupon and wandered past their cell phone car mount. I had been kicking around the idea of getting the official Motorola unit for a while now, but the price always threw me off.
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Anyway, just wanted to share. I've been through some universal docks in my day, and they usually suck after a while. And then my wife and I share a car, but my phone is caseless and hers has a case, so the official one was kind of up in the air.
Click to expand...
Click to collapse

SubliminalME said:
Well, the Monoprice unit is $7.05. And it works AWESOME! Fits the phone like a glove.
Universal Windshield Mount for iPhone®, Samsung Galaxy S®, and most Mobile Phones - Black - Monoprice.com
Click to expand...
Click to collapse
Hey @SubliminalME, I recently picked one of these up, it does fit very well. Problem is that it either blocks the headphone jack or the charging port, depending on which way you put the phone in the mount. Have you found a way around this?

i bet you could drill a hole in the single mount pretty easily.
the better question (for me) is whether the phone can be positioned in the mount without blocking the camera. a windshield mount is only useful to me if i can use the camera. otherwise, it's going in a cupholder.

The Monoprice one is showing out of stock!! :/

UncleMike said:
Thanks. Do you think it would fit with a rugged case, like Otterbox Defender or Seidio Dilex?
Click to expand...
Click to collapse
SubliminalME said:
I think it would fit, actually.
Click to expand...
Click to collapse
I ordered two of these and they came in the other day. Surprisingly, it fits well with the Seidio Dilex case. My concern was that there wouldn't be room for the integrated kickstand on the back of the case, bit there's just enough room for it.
I have an adhesive mounted Garmin-compatible ball (~17mm) on my dash that works perfectly with it.

i've got mine, but haven't taken it out of the box yet!

In for one
Thanks for the heads-up! Always have loved Monoprice and I can't bring myself to go the imagnet route (ie pop off the back) on the X. This should be a nice cheap compromise, especially since I already have the garmin ball installed in both my cars.

The best that I've ever used is the Tetrax Xway. PRevents the phone from overheating by clipping in front of the A/C, and works with nearly every phone/case combo. I've used it through my Droid Incredible, Galaxy S2, and Galaxy S4 GPE with numerous cases.
http://www.tetrax.com/us/products/iphone-ipod/tetrax-xway
https://www.youtube.com/watch?v=awh6QP8-BBE