Related
Has anyone bought the case at amazon called Skinomi. It has a full body screen protector n a case,bt the picture has the phone with the speaker covered. Anyone know about it
Sent from my SAMSUNG-SGH-I897 using XDA App
If you mean the "carbon fiber" Skinomi case + screen protector, I was thinking about that myself but wanted to see some reviews first. I'm also uncertain as to whether this is actually a case or just a textured skin. I'd prefer a case as skins are a bit of a pain to get to stick to the curved parts.
Sent from my Samsung Captivate
Same here, I would like to get some close up pics + review on it.
I want to verify the technicality of Skinomi carbon fiber's case.
I just ordered it from Amazon, so I will let you know!
I have been using the full skinomi set for the captivate for over 1 week now. I would be more than happy to detail my opinion of it.
The basic version is that its a good buy and I am glad I got it. I only use the skin kit and do not have a hard case. My phone stays in a phone/cargo pocket daily and the skin is holding up to the constant sliding in and out of my pockets along with desk nightstand sliding.
PROS:
Touch sensitivity and screen clarity are unaffected. Still bright and clear.
Does not effect proximity/light sensor.
Holding up well to normal/heavy use.
Good alternative for those who don't like cases.
Very thin and unobtrusive.
Good product packaging and instructions.
CONS:
Though the skin is thin and hard to see, you can feel the edges(specifically on the phone sides).
Fingerprints show more easily.
No camera lens protection.
I'm scared to scratch my new skinomi skin.
Detailed version follows:
I purchased through amazon for $18.99 which was a dollar less than the manufacturer website. The box was smaller than I expected from the pictures but still nicely packaged. You immediately feel as though it is a good product. A small bottle of detergent/water is provided along with skin, instructions and a rigid smoothing card. The skin came precut on two pieces of paper. Each section fit very precises and needed no modification. The instructions provided were clear and simple and I suggest following them closely.
I wiped the phone with a lent free cloth and made sure my hands were very clean prior to installation. I suggest a location with good lighting (i chose the bathroom counter).
During the process you are instructed to moisten your fingers then remove a section of skin from the paper for application. You then moisten the front and back(adhesive side) of the skin with the provided spray. I found that the screen section was the only one that benefits by spraying the front. This helps to reduce friction when smoothing out the bubbles and liquid. Otherwise you may run out of the spray. I barely had enough but I was very liberal with the spray.
The biggest and best caution I can give...Take your time between the applications of each section. Push out the moisture and allow the material to begin adhering before attempting the next section. If you do not you will end up with misaligned sections of skin. It only takes about 2 minutes for each section to begin to stick if you push out the liquid.
After all is applied, let the phone sit for several hours. Do not try to wipe off the outside of the skin or turn the phone on. Allow drying and set time before handling. Manufacturer suggests 12-24 hours. I was comfortable turning the phone on and using it gently after 4 hours. 12 hours later I was comfortable with heavy use.
It has been one week and I have decided to get the Skinomi kit for my sons aria.
Hope this helps anyone interested.
Pictures please
They have Vibrant's back cover picture in Amazon, can you confirm that we have access to battery after applying the skin?
itissat said:
They have Vibrant's back cover picture in Amazon, can you confirm that we have access to battery after applying the skin?
Click to expand...
Click to collapse
Yes, you have access to all panels, buttons, and plugs. The kit comes with a total of 8 pieces:
Screen
Top (usb/headphone)
Bottom (mic)
Left side(volume)
Right side (battery)
Battery cover
Upper back plate
Lower back plate (battery release).
NOTE - I can only speak for my experience with the CAPTIVATE version of skinomi.
not to bad, i prefer a case over a skin on my phone tho
Shovelhead84 said:
Yes, you have access to all panels, buttons, and plugs. The kit comes with a total of 8 pieces:
Screen
Top (usb/headphone)
Bottom (mic)
Left side(volume)
Right side (battery)
Battery cover
Upper back plate
Lower back plate (battery release).
NOTE - I can only speak for my experience with the CAPTIVATE version of skinomi.
Click to expand...
Click to collapse
do you have a picture of it?
NuttySquirrel said:
I just ordered it from Amazon, so I will let you know!
Click to expand...
Click to collapse
which color did you order?
and thank you for taking the time.
accinfo said:
do you have a picture of it?
which color did you order?
and thank you for taking the time.
Click to expand...
Click to collapse
I do not mind taking a picture, however my camera here at the house is dead and I do not believe taking a picture will show anything. You can not tell that the skin is there. It is so thin and clear that when I show someone my phone in person I have to point out the slight color difference around the "Galaxy S" logo.
you can FEEL the skin but you can not SEE it. Just fits that nice.
Shovelhead84 said:
I do not mind taking a picture, however my camera here at the house is dead and I do not believe taking a picture will show anything. You can not tell that the skin is there. It is so thin and clear that when I show someone my phone in person I have to point out the slight color difference around the "Galaxy S" logo.
you can FEEL the skin but you can not SEE it. Just fits that nice.
Click to expand...
Click to collapse
True true, thanks for taking the time to write the review.
(In the meantime, I'll be waiting for pics still xP)
oh and what color have you gotten?
I got the clear skin. That's why I don't think it looks much different from a stock phone. Just seems to have a bit more shine. We will see tomorrow. I shoot some pics.
Shovelhead84 said:
I got the clear skin. That's why I don't think it looks much different from a stock phone. Just seems to have a bit more shine. We will see tomorrow. I shoot some pics.
Click to expand...
Click to collapse
ohhhh, The OP and I were referring to the carbon fiber skin instead of the clear skin. or am i the only one in the "wrong" track?
Yeah i was asking about the case
Ur on the right track
Sent from my GT-I9000 using XDA App
accinfo said:
ohhhh, The OP and I were referring to the carbon fiber skin instead of the clear skin. or am i the only one in the "wrong" track?
Click to expand...
Click to collapse
Well then, no need for pics. My bad.
Either way my experience with skinomi is positive and hopefully that helps in your decision.
I'll be getting out of the way now...
If you're referring to: http://www.amazon.com/Skinomi-TechS..._1_1?ie=UTF8&s=wireless&qid=1281820381&sr=8-1
It's a skin, not a case, as I just found out when I opened the box. Haven't decided whether or not I'm going to keep it, as I was expecting a case as well.
Other than being carbon fiber, it is exactly as shovelhead84 described: 8 pieces which are akin to sticked that you apply to your phone.
Um, are you sure that was the URL you meant to paste? It appears to be a campground somewhere.
Sent from my SAMSUNG-SGH-I897 using XDA App
NuttySquirrel said:
If you're referring to: http://maps.google.com/maps?f=q&sou...-121.955109&spn=0.64945,1.231842&z=10&iwloc=A
It's a skin, not a case, as I just found out when I opened the box. Haven't decided whether or not I'm going to keep it, as I was expecting a case as well.
Other than being carbon fiber, it is exactly as shovelhead84 described: 8 pieces which are akin to sticked that you apply to your phone.
Click to expand...
Click to collapse
Yeah, your link goes to google maps for a vamping ground.
You are correct in that i is not a case but a skin for the phone. .08mm thick allows it to fit under most cases and in pouches, but I think that would be a bit redundant.
It's been 2 weeks now with my skinomi and its going well. I damaged the lower microphone portion of the skin when a monitor at work was set on my phone. Didn't scratch the phone and only damaged a portion of the skinomi.
So far I have not had any scratches develop on the screen protector and I have NOT been gentle with my phone.
My bad, link updated (http://www.amazon.com/Skinomi-TechS..._1_1?ie=UTF8&s=wireless&qid=1281820381&sr=8-1)
I just applied the above skin to my phone. No troubles with applying the carbon fiber di-noc pieces (dont use the solution) , the clear screen and button protector sections are a little cloudy (hoping this goes away?)
The biggest gripe I have is that the "skin" doesnt protect the corners of the device, which imo are most likely to be worn.
I ordered one, I was sort of hoping their web site stating it was dry application meant it was a sleeve or case. Was it difficult to align and remove bubbles? I can can't see any seams at all in the photos, so I imagine the pieces come quite close to the edges.
Sent from my SAMSUNG-SGH-I897 using XDA App
So I had the maximum cover on my phone. BUt it was an awkward fit, the slim side panels fell off. The back covers I had to cut a line down the middle to get it to fit on the curve. The corners where I had the slits eventually came loose and flapped about.
But I left it all on untill I got fed up after it turned my nice white phone a lovely shade of brown, so now it's currently defenceless apart from a cover on the screen.
Anybody know what the full body protection is like?
It has less parts but looks like the back may be a better fit. I get a free replacement from zagg but wondering which one poeple recomend?
On an other note anyone change their phones entire outer cover? fancy a change to a black phone!
http://www.ebay.co.uk/itm/130553746...AX:IT&_trksid=p3984.m1423.l2649#ht_1155wt_991
I would get one with just the back cover but then the silver tones from the front won't match. Unless someone can anyone reccomend one?
I've looked at the phone and it appears to take off the front you need to unscrew a screw which has a "void warranty" sticker over it, but guessing I've done this already with changing the OS to cyanogenmod.
I have the full body Zagg cover, pics here: http://capableandroid.blogspot.com/2010/10/zagg-invisibleshield.html
After almost an year some corners have come loose and filled with dust, but the middle and bottom parts are ok.
As for the case.. I can`t comment, I have a brown-grey one and I`m fine with it. (i still use a gel case, just in case.)
Looks different to the one I had. I see you have no protection over the corners, for my case I have to make a slit over them so the case was eventually overlapped. Mine has only lasted 6months...if that. Was horibbly discoloured. It's done the job though. Shame about the odd bits that havn't been protected. Never noticed the marks before since I took off the old shield.
I bought the Zagg invisible shield maximum cover but havin't applied it yet, doesn't sound very good. Is the screen protector ok and is the fluid you use to apply it safe, can it stain or discolour the phone, thanks.
ricky20 said:
I bought the Zagg invisible shield maximum cover but havin't applied it yet, doesn't sound very good. Is the screen protector ok and is the fluid you use to apply it safe, can it stain or discolour the phone, thanks.
Click to expand...
Click to collapse
The fluid is save. If you, by any change, get fluid IN the phone, just leave it to dry for a day or two before putting in the battery.
OK, thanks for the advice.
is there any type of screen protector material for the chrome on the camera? I hear it gets scratched very easily
Maybe Zagg will make one. Most reviewers see how it scratches so easy.
AT&T will sell the Zagg full body at least. I'm going to try to cut out a custom fit from reg screen protector.
That's a pretty small piece to protect. Knowing Zagg, it'll be $10 + shipping for just that piece.
Alternatively, you can get a silicon skin for the whole phone which I heard fits pretty snug and doesn't add a lot of bulk.
I just bought the gel case and it keeps the back of the phone off the objects you lay it on
Sent from my Lumia 900 using XDA Windows Phone 7 App
People just cut out a piece of clear packaging tape and put it over then chrome! I did just that
Sent from my Lumia 900 using Board Express
I used Incipio case and so far the chrome hasn't been scratched even though it's not completely covered.
food wrap film will do it
I bought the skinomi carbon fiber full body screen protector. It protects every part of the phone including the chrome. Got if from amazon. Might be something to consider.
uptempo777 said:
That's a pretty small piece to protect. Knowing Zagg, it'll be $10 + shipping for just that piece.
Alternatively, you can get a silicon skin for the whole phone which I heard fits pretty snug and doesn't add a lot of bulk.
Click to expand...
Click to collapse
I got the full body protector from Zagg for $9 + s&h, off of Amazon. I also have & love the silicon skin, can barely tell it's there.
Sent from my Kick Ass Lil Radar using XDA Windows Phone 7 App
waltah! said:
AT&T will sell the Zagg full body at least. I'm going to try to cut out a custom fit from reg screen protector.
Click to expand...
Click to collapse
Awesome idea.... Gonna go and do that now. Thanks man!
The store employees repeatedly offered me a "cleaning pad" that stuck to the back side of the phone. They put it on the camera metal. They would come take it off to wipe the screen and then just replace it on the back over the camera metal again.
I just got the Skinomi carbon fiber full body screen protector, and slapped it on. It looks good, but the quality of the clear screen protector is pretty bad. Not as noticeable when the phone is on, but could be much better. The warranty is lifetime, so I might get another. The carbon look parts look really good, and should protect against normal use.
. Ps, the clear screen protector hadn't dried yet. Now it looks fine. The carbon look is pretty cool..
The guys on this thread who have the Skinomi full body protectors, can you post some photos of it applied to the phone?
I'm in the UK and have a white 900,so I want to see which bits of the phone don't get covered by the skin as the bright white would be very noticable if there are fitment gaps.
I'm actually on my 2nd handset in a week as the buttons on the first one were loose and rattly. However, on that first handset the camera chrome got scuffed in just 2 days even though I kept the phone wrapped in a screen cleaning cloth. I've left the OEM protective film on my new one until I have something permanent, just like the OP has asked for.
As selection of colours for a chrome protector would be cool too. Hopefully someone will come up with this on eBay before long In the meantime I'll cut up a 'generic' screen protector into a make-shift skin for the chrome.
IGG full body protector also covers the chrome on the camera. The only cutout on the back cover is for the camera lens hole and the LED flash hole.
I'm using mine under the black cover so the shiny look isn't a bother for me. Just looking to protect the back from being scratched by the case (or debris that gets between the OEM case and the phone body) which I've seen happen on an N9.
I'm going to make one from a spare screen protector I have. I've just checked an the camera hole is the same size as you get from a hole-punch....so I've got a screen protecter here with me in the office today
Here's my temporary solution, a Nokia cover, a strip of electrical tape and a hole punch.
I'll try to get a decent one cut out so that I don't need to cover it up with the bumper. I may also see if a printing company I've worked with in the past would be able to knock up a few sheets of clear, single-coloured and maybe patterns or designs. Chances are it'll be too expensive, but it can't hurt to ask the question.
Bleh. The chrome on my camera is all scratched up. I hate how it's curved.
Bought the orzly black for my black /dark htc 10, fitted perfectly.. I'd asked before if there were cutouts for the buttons and was told No!
Well ...... There is and it looks a bit stupid in the light, i almost want to colour them in a bit to hide them..
If you want perfection like me, this isn't it, but. It is the only tempered screen protector that fits full screen and has 100% coverage,if you have the original layout then fair enough, just I don't
Just a shame about the buttons.
PS: I have a mod which turns off the lights and moves back to recent and vice versa, so seeing cut outs for them is a downer.
I finally got the Orzly for my 10 and have to agree with you that the cut outs are weird.
They make it look very cheap and knock off like, I am OK with it but would prefer something else (though unsure what else would be better).
Everything does line up a treat though, impressed by that.
I'm considering ordering one of these, can you post a photo of the buttons?
ryanjsoo said:
I'm considering ordering one of these, can you post a photo of the buttons?
Click to expand...
Click to collapse
Not at the moment, will do tomorrow. Looks decent, but those cut outs lol, really bad. Should be all black.
stretchnz said:
I finally got the Orzly for my 10 and have to agree with you that the cut outs are weird.
They make it look very cheap and knock off like, I am OK with it but would prefer something else (though unsure what else would be better).
Everything does line up a treat though, impressed by that.
Click to expand...
Click to collapse
Yea it fits very well, possible to put something over or under them, if it's over them then it would have to be hard wearing as it'd soon rub off from pressing the buttons.
As far as I know there are no tempered glass edge to edge covers, I've looked long and hard, some have images showing their protectors as if they do, but they don't.
This is the closest. A marker may work but it'd be temporary.
Either that or embrace the lights, personally I swap back and recent which is why its such a killer for me. Guess I'll have to get used to it. Should have painted them before fitting.
Here's my mod for swapping the buttons.
http://forum.xda-developers.com/showthread.php?t=3392559
It seems there are two versions and I'm not sure what's meant by cutouts - do you mean actual holes in the glass? My Orzly cover has transparent squares in the black paint over the button areas and it doesn't look that bad to me.
kempshott said:
It seems there are two versions and I'm not sure what's meant by cutouts - do you mean actual holes in the glass? My Orzly cover has transparent squares in the black paint over the button areas and it doesn't look that bad to me.
Click to expand...
Click to collapse
Yes they are what I'm referring to, they do look alright, however as I've said before I switch my buttons so back is recent and vice versa, I've also turned the lights from the buttons completely off so it looks right, these cut outs look terrible for my needs. Not the end of the world but definitely a blemish on a what is otherwise a a sleek looking cover.
kempshott said:
It seems there are two versions and I'm not sure what's meant by cutouts - do you mean actual holes in the glass? My Orzly cover has transparent squares in the black paint over the button areas and it doesn't look that bad to me.
Click to expand...
Click to collapse
My Orzly glass comes with the cutout in the tempered glass. And the oily film is visible beneath the tempered glass except when the screen is ON. But the main issue is the rainbow effect it displays allover the screen whenever we encounter a white colour in screen. I regret purchasing this tempered glass.
Premdrums said:
My Orzly glass comes with the cutout in the tempered glass. And the oily film is visible beneath the tempered glass except when the screen is ON. But the main issue is the rainbow effect it displays allover the screen whenever we encounter a white colour in screen. I regret purchasing this tempered glass.
Click to expand...
Click to collapse
I don't have that issue with rainbow, I do have those cut outs though.
They're horrid.
dladz said:
I don't have that issue with rainbow, I do have those cut outs though.
They're horrid.
Click to expand...
Click to collapse
Can you share some pics of your tempered glass?
Premdrums said:
Can you share some pics of your tempered glass?
Click to expand...
Click to collapse
it's exactly the same as kempshotts, no different.
Hey guys! Just thought I'd share my experience trying to hunt down the best screen protector for my Galaxy S10e.
After trying about 4 different glass protectors all with pinch hole camera cut outs and being dis satisfied with the look and feel of the edges I decided to try one that came with a solid glass that covered the front entirely. It also had a super thin black boarder that I wasn't entirely convinced I was going to like.
Turns out it is AMAZING!! Phone looks literally as if there is nothing on. Edges are completely smooth so no more scratchy feeling whenever I slide my finger to use the edge display or gesture navigations.
Totally felt I had to share this! You can search for it on Amazon! :highfive:
Link: amFilm Glass Screen Protector for Galaxy S10e, Tempered Glass, Full Screen Adhesive, with Easy Installation Tray (Black) https://www.amazon.com/dp/B07PP9Q288/ref=cm_sw_r_cp_apa_i_59LYCbQZEMHN9
Share the name and link maybe? Is it case friendly? Do the black edges cover up some screen or leave everything visible as before?
The same?
https://www.amazon.de/amFilm-Schutz...film&qid=1556700491&s=gateway&sr=8-1-fkmrnull
reikar said:
Share the name and link maybe? Is it case friendly? Do the black edges cover up some screen or leave everything visible as before?
Click to expand...
Click to collapse
Sorry wasn't sure if I could share a link i just added it to the OP. Yes it is case friendly and I belive the black border covers a super small part of the screen that is a fraction of a millimeter. When using edge lighting all you need to do is increase the thickness a bit.
However it does not get in the way at all and from my experience it is way better than other screen protectors I have tried that have transparent as they reflect the light at angles. Also the borders look terrible during the day, you can clearly trace it with your eye. This one literally reflects no light and looks like if there is nothing on it at all (the black border provides this effect)
Furthermore, this one comes with a plastic frame that makes placement and alignment such a breeze!
Hope that helps!
NisseGurra said:
The same?
https://www.amazon.de/amFilm-Schutz...film&qid=1556700491&s=gateway&sr=8-1-fkmrnull
Click to expand...
Click to collapse
Yea that's it!
Another good one is the tempered glass from Skinomi. It also comes with a install frame and they're 7.99 for a three pack. Look great, install quickly and cover pretty spot on.
dmdelgado said:
Yea that's it!
Click to expand...
Click to collapse
Just got it, pretty good. Easy installation with the supplied frame.
Recommended.
stay-down said:
Another good one is the tempered glass from Skinomi. It also comes with a install frame and they're 7.99 for a three pack. Look great, install quickly and cover pretty spot on.
Click to expand...
Click to collapse
I didn't know Skinomi make temper glass, just film.
Sent from my SM-G970U1 using Tapatalk
Is the amFilm full glue? (not only on the sides?)
Never mind..... from Amazon: Bubble Free Guarantee, Full Screen Adhesive, Designed for easy installation with included Easy Application Tray!
And the Skinomi?
MasterThiefGarrett said:
Is the amFilm full glue? (not only on the sides?)
Never mind..... from Amazon: Bubble Free Guarantee, Full Screen Adhesive, Designed for easy installation with included Easy Application Tray!
And the Skinomi?
Click to expand...
Click to collapse
I think Skinomi is regular plastic, spray. Maybe I missed it but I can't find temper glass made by Skinomi.
Sent from my SM-G970U1 using Tapatalk
If anyone wants to order from Aliexpress, CHYI brand always made great screen protectors, either hidro, film, tempered... I might try them out on the s10E soon.
Deleted
dmdelgado said:
Turns out it is AMAZING!! Phone looks literally as if there is nothing on. Edges are completely smooth so no more scratchy feeling whenever I slide my finger to use the edge display or gesture navigations.
Totally felt I had to share this! You can search for it on Amazon! :highfive:
Click to expand...
Click to collapse
Tried this because of your recommendation (and after trying 5 different "perfect" protectors) - it is really great and totally worth the money! Thanks, pal
Got the Nillkin glass protector -> https://www.nillkin-case.com/index.php?route=product/product&product_id=6425
It's covering the whole display, with black borders around it(they eat 1-2mm from the actual display).
Very happy about it. Bought it at a locat shop with about 20 euros.
amFilm for Samsung S10e by TechMatte
I Love this screen saver
amFilm for Samsung S10e by TechMatte
Very easy install with alignment tool, nice squeegee tool got all the bubbles out. Looks excellent after install was complete. Will update in a few days to see how it look after a few days of use but so far so good. Was probably the easiest Tempered glass screen saver I have ever installed, very satisfied
Bought this exact screen protector because I wanted something inexpensive and without a cam cutout (I'd rather deal with an additional layer of glass on a front camera I anyway never use than with dust piling up in a tiny cutout). Well, I don't share OP's enthusiasm. A corner started to shatter appart after only a week, and I didn't even drop it or anything. It was in the same pocket as my lighter which might be the culprit but c'mon, if it can't handle a lighter and turns into a H8 shards dispenser that soon, how is it supposed to prevent scratches on the screen ?
Another corner got damaged after a 50cm (metric FTW) drop on wooden floor and I decided to get rid of it altogether.
It's cheap, it's easy to apply, it looks good (although the black border overlaps the screen by maybe half a millimeter), and it might last a bit longer for someone less careless than I am, still not a viable long term option according to me.
Rob_lochon said:
Bought this exact screen protector because I wanted something inexpensive and without a cam cutout (I'd rather deal with an additional layer of glass on a front camera I anyway never use than with dust piling up in a tiny cutout). Well, I don't share OP's enthusiasm. A corner started to shatter appart after only a week, and I didn't even drop it or anything. It was in the same pocket as my lighter which might be the culprit but c'mon, if it can't handle a lighter and turns into a H8 shards dispenser that soon, how is it supposed to prevent scratches on the screen ?
Another corner got damaged after a 50cm (metric FTW) drop on wooden floor and I decided to get rid of it altogether.
It's cheap, it's easy to apply, it looks good (although the black border overlaps the screen by maybe half a millimeter), and it might last a bit longer for someone less careless than I am, still not a viable long term option according to me.
Click to expand...
Click to collapse
Sucks you had a bad experience with it. So I ended up reaching out to them after myself finding my screen protector had cracked and they sent me another one for free.
It probably isn't the strongest screen protector but it's cheap, easy to install, and looks great! It's TRUE the protectors with the hole punch are a haven for dust and just look hideous in general.
If you stumble across a better screen protector I'd love to hear about it! Perhaps I'll try it out next if this one tanks on me again
Cheers!
dmdelgado said:
If you stumble across a better screen protector I'd love to hear about it! Perhaps I'll try it out next if this one tanks on me again
Click to expand...
Click to collapse
I should receive one from LK in a couple days, let's see how it holds. I cannot ask for a replacement, I'm french and they offer replacement only in america, but this time there's 3 in the package.
Does the amFilm protector black edge cover visible part of the screen like Nilkin does? Nilkin protector black sides cover also OLED visible screen (half mill on each side).
sikita said:
Does the amFilm protector black edge cover visible part of the screen like Nilkin does? Nilkin protector black sides cover also OLED visible screen (half mill on each side).
Click to expand...
Click to collapse
Yes it does. I have one installed now and it cuts off a sliver on each side