[Q] [q] htc desire s-lcd or amoled??? - Desire General

Hello,
ok guys, maybe it's just a noob question. i just bought an htc desire fron orange france, and i want to use stock htc rom, but how do i know if my phone has an amoled or an S-LCD DISPLAY????
Thank you

Unfortunately I can't give you a straightforward answer. You can either check the version of your hboot by going to settings\about (not sure if you can see it there) or power off, power on+hold vol down button. You will see a white screen with several options, if you don't see HBOOT, click fastboot it should be there. If the version is 0.83 or higher it is slcd probably. Alternative - flash unrevoked and when your device boots into recovery, if your screen is black or just htc with black bar it is slcd. This will Root your phone though!! If you're with black screen don't worry, just flash unrevoked again with the slcd recovery image (file\flash custom recovery in unrevoked)
I found mine is slcd the hard way, didn't knew there are 2 screen types

darkflyer1983 said:
Hello,
ok guys, maybe it's just a noob question. i just bought an htc desire fron orange france, and i want to use stock htc rom, but how do i know if my phone has an amoled or an S-LCD DISPLAY????
Thank you
Click to expand...
Click to collapse
why dont u check the box?
if it does not say amoled then its SLCD.

no description of the display panel on the box, neither on user manual!!!!

When all else fails take out the box and manual
Ronaldo_9 had in mind that if you have on the box "3,7" Amoled" it is amoled, if it says "3.7" touch-sensitive screen" then it is slcd. It's on the back of the box.

you can tell by looking at the screen closely...
slcd pixel arrangement:
ooooo
ooooo
ooooo
Amoled
ooooo
_ooooo
ooooo
As a result amoled gives a jagged look to the edge of text and other objects.

Related

Black screen showing green tint...

Hey guys,
picked up my desire a few weeks back, only just started using it the other day (was researching best way to transfer PIM data from HD2).
anyway, i was playing around with some of the built in apps and junk last night...in a room with the light off, and noticed that when the screen was black (on/illuminated, but not colour - the desk clock screen).. there is a reasonable strong green tint down the right hand side of the display. i have done a little research and have read some people have complains of green/blue/pink hues to their entire display.. but my green stain is only on part of the screen.
anyone else have this problem?
i went back to the store i got it from, they said that HTCs exchange policy requires me to send my device back, they will look at it and either repair or replace. seeing as the reason i bought the desire is to desperately escape WINMO, i figure the slight bug of a green stain is less of an inconvenience than using my HD2 for a few more weeks.
cheers.
Could be down to having a SLCD screen as opposed to an AMOLED one
The blue tint to the amoled screen is there on purpose, blue led's die alot quicker than other ones, samsung make there screen to over display blue, as your device gets older this blue will slowly die to a yellowy colour! Maybe the green tint is related?
Sent from my HTC Desire using Tapatalk
EddyOS said:
Could be down to having a SLCD screen as opposed to an AMOLED one
Click to expand...
Click to collapse
Does he have a slcd screen lol ignore my last post then xdaers lol
Sent from my HTC Desire using Tapatalk
I'm assuming so if it was only purchased a few weeks ago, could be wrong
yeah guys... i got the SLCD version.
i dont think its a natural screen 'quirk'.. as it only appears on a small portion of the screen.
cheers for the replies though ey.
I have the same problem on both my desires. One of them has a finish tint in the middle of the screen and this one has like a brighter spot on the top right of the screen. I have the SLCD screens. I bought the phones in Wisconsin.
Off topic
I feel so alone on this forum because everyone talks about the GSM version. Is there any news about froyo update for this phone on US Cellular? I love the phone but getting tired of waiting all the time. I just heard there's 3.0 coming out on the 11th of November. But not for Desire. I'm sure it will be there when my contract is over. Lol.
Sent from HTC Desire 2.1
i also have an slcd desire
but i have a pinkish tint in the top right
it's kidney shaped :d
black lcd
hi
Solution to you brick
Past details of HTC bravo
Android 2.3
Hboot 1.02.001
I tried to unlock the bootloader by
1- HTC dev method
I started by the same procedure given on the
website. But the procedure didn't work for me,
when I commanded adb devices it never
showed my phone then when I commanded '
get oem identifier token ' I got another error. I
got frustrated
2- Then I went on to the mini_adb method by
using shell, Su commands
It neither worked
3- After that I came across the downgrade and
boot method, it resulted into a brick
But no worries my pals !!
Unbricked successfully !!
basically it was an Indian phone so some strong
securities
first installed this to my phone which had 2.3
android and hboot 1.02.001
RUU_Bravo_hTC_Asia_India_1.21.720.4_Radio_32.36.00 .28U_4.06.00.02_2_release_127705_signed.exe
then my phone got bricked due to downgrade.
the led screen blackout happened and a vibrate
was at the startup and can navigate volume
buttons only*
then i got worried after that i installed this thing
to unbrick back
RUU_Bravo_hTC_Asia_WWE_1.19.707.7_Radio_32.36.00.2
8U_4.06.00.02_2_release_126179_signed.exe
then to no help after that this one
RUU_Bravo_HTC_WWE_1.15.405.4_Radio_32.30.00.28U_4.
05.00.11_release_122704.exe
and wahhoo!! unbicked my phone to 2.2
android, dont worry the phone will popup an
update notifier after you start your phone

Desire SLCD Display broken. Replace with AMOLED?

Hi,
i have a (little) problem. I got a SCLD Version of the HTC Desire. But the Display is broken. I have replaced the display with a new one, but the replacement display seems to be an AMOLED version (Samung Logo on the back). My problem is now, when i turn on the phone, the display stays off (black). After a little search in the forum i see that an AMOLED Rom don't have the correct drivers for an SLCD Desire. But i have a SLCD Rom and need an AMOLED Rom. Does somebody know if i replace the SLCD display with an AMOLED and flash an AMOLD Rom (factory HTC Rom), that the phone will turn on my display?
I don't know which version i can flash, because there are so many different Roms.
Unfortunately i only know that the desire have android 2.1 (O2) but it seems not to be branded. I also don't know the current HBOOT version. Forehanded i have created a Goldcard for the Desire with the adb.
Thanks in advance.
Anthrax6937 said:
Hi,
i have a (little) problem. I got a SCLD Version of the HTC Desire. But the Display is broken. I have replaced the display with a new one, but the replacement display seems to be an AMOLED version (Samung Logo on the back). My problem is now, when i turn on the phone, the display stays off (black). After a little search in the forum i see that an AMOLED Rom don't have the correct drivers for an SLCD Desire. But i have a SLCD Rom and need an AMOLED Rom. Does somebody know if i replace the SLCD display with an AMOLED and flash an AMOLD Rom (factory HTC Rom), that the phone will turn on my display?
I don't know which version i can flash, because there are so many different Roms.
Unfortunately i only know that the desire have android 2.1 (O2) but it seems not to be branded. I also don't know the current HBOOT version. Forehanded i have created a Goldcard for the Desire with the adb.
Thanks in advance.
Click to expand...
Click to collapse
Dont know how much this will help you..But, when my Desire was given for warranty, they 'accidentally' put in an AMOLED display instead of the SLCD with which it came, and then had to replace the board too with an AMOLED compatible board since the board "didnt recognize the AMOLED" (their words). I don't know if your problem can be solved with the software alone, but I'd rather someone else takes this question..
So the only way to bring it back to life is to send the display back and install a SLCD display? What a pity.
Yes, you need a slcd display.

[Q] need help for my htc desire

how do i identify what "tipe" of phone i have i mean CDMA/GSM/SLCD..????
i got no clue to identify my phone and i`m intending to root it asp.
i buY IT with contract from o2 it whose lock on o2 but now is unlock.
bravo pvt3 ship s-on
hboot 0.93.0001
microp 051d
touch panel synt0101
radio 5.11.05.27
MODEL A8181
NETWORK HSPA/WCDMA (900/1200MhZ)
GSM/GPRS/EDGE (800/900/1800/1900Mhz)
IT`S MADE IN TAIWAN (C E 0682)
whats the model number written on the phone. [ behind the battery ]
Ok well if its CDMA you won't have a sim card in it if it's GSM you will. The slcd - amoled will not make much difference to the ROM as that is what type of screen your device has - easiest way to tell this is put up a completely black photo on slcd it will appear grey at the edges because slcd is backlit armoled will all be black black - do this in low light to see easily which screen you have if you can't see anything in pitch black its armoled
warlordxxx said:
Ok well if its CDMA you won't have a sim card in it if it's GSM you will. The slcd - amoled will not make much difference to the ROM as that is what type of screen your device has - easiest way to tell this is put up a completely black photo on slcd it will appear grey at the edges because slcd is backlit armoled will all be black black - do this in low light to see easily which screen you have if you can't see anything in pitch black its armoled
Click to expand...
Click to collapse
It's spelled AMOLED actually
And yeah, otherwise nicely said, CDMA/GSM and SLCD/AMOLED are two entirely different type of things. One more thing to check before rooting is whether your device is branded or not.
Sent from my HTC Desire using Tapatalk
if you have an s-lcd you will see it written behind the accu
IT WHOSE LOCK`T ON o2 network but i contact them for unlocking my device and now is unlock`t to any network...
erklat said:
It's spelled AMOLED actually
And yeah, otherwise nicely said, CDMA/GSM and SLCD/AMOLED are two entirely different type of things. One more thing to check before rooting is whether your device is branded or not.
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Didn't look right when i wrote it should have looked back up because i spelt it ok the first time i wrote it in the sentence but hey it was 12:40 in the morning gimme a break lol apart from the mis-spelled word the info was correct
gabon3zu said:
IT WHOSE LOCK`T ON o2 network but i contact them for unlocking my device and now is unlock`t to any network...
Click to expand...
Click to collapse
Ok and your question is ??
i sort it whit my tipe of phone is amoled.i start root it with unrevoked and work well but security is on(S-ON) i have SU instaled but when i try Titanium backup it say my phone is not root it.
how do i should deactivate S-ON to S-OFF..because i try with unrevoked-forever and i got this error :
unrEVOked forever S-OFF patch v1.1
Verifying system type...
.
Got device:
@PID: 77,"BRAVO"
Got radio version:
5.11.05.27
E:unsupported system
E:Update failed. Check /sdcard/soff.log.

[Q] Root HTC Incredible Sony Version (SLCD) to get Samsung AMOLED LCD to work?

I've been hunting around and haven't found any good information on this so I thought I'd ask.
I have an HTC Droid Incredible with an SLCD in it and the screen has cracked. Unfortunately, the SLCD seems to no longer be available in the market (I've looked everywhere). All I can find are the Samsung AMOLED versions.
So here's my question: Is there any way to root the Incredible (originally designed for the SLCD) and get it to work with the AMOLED version of the LCD?
I'm thinking no but I thought if the connectors are identical, then maybe new software would allow me to run a different LCD in the phone.
Thanks.
I've a set with broken screen too.
How can I tell if it's SLCD or AMOLED?
I'm also looking for a replacement screen.
The label on the back of the screen has this numbers:
P/N: 60H00291-00P
If you can see the screen well enough to navigate to settings>about phone, if the hardware version is 002 its amoled, 003 is slcd.
Sent from my ADR6300 using XDA App
Sorry to be a pain about this but I'm not asking how to tell the difference between the parts. There's tons of posts about that (from looking at the hardware version, to the part numbers on the back, to walking into a dark room and turning the phone on).
The question here is: Can you root a DInc that shipped with a Sony LCD and get it to work with a new Samsung LCD (AMOLED version)?
Thanks.
I don't think anyone has ever tried it. I'm not an expert, and i have never attempted to do what you are doing, but it seems like it could work. Actually i'm thinking you wouldn't even have to root the phone, can't you just grab the most recent RUU file and restore the phone from that? The most recent would have to include both AMOLED and SLCD drivers in it? Is a root required to restore from a RUU file? I have never done it haha. Also you would have to check if the connectors are the same, i think chances are good that they are the same though. Anyway, good luck and keep us updated as to whether it worked or not.
any update?
Hey JetCity,
Same issue as you, can't find the S-LCD anywhere. Did you have any luck swapping out for the AMOLED?
Thanks.
Martin
I cna't imagine it would be an issue, set your phone to the most recent stock RUU and then install the new AMOLED screen. id be very surprised if it didnt work.
k_nivesout said:
If you can see the screen well enough to navigate to settings>about phone, if the hardware version is 002 its amoled, 003 is slcd.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I wouldn't rely on that. It used to say 002, then I flashed GB and it said 003. Really weird. I'm sure mine is AMOLED.
Did anyone ever get this to work?
I have an Incredible with a cracked SLCD, but I have a spare/working AMOLED from a parts Dinc. Can someone point me to a RUU to download that might have both drivers so I can possible use my spare LCD?
step aside from for the hardware geek
No driver in the world is going to help you make an AMOLED work with an SLCD. You're problem is hardware on the board. The drive electronics for the SLCD and AMOLED are different. One very notable difference in the electronics would be no provision to drive a back light on an AMOLED.
As for finding SLCD and AMOLED screens, I've looked and they're out there. I haven't looked into this, but the hardware inside the Nexus One is nearly identical to the dInc and that screen may work in it.
just to clarify, is it the screen GLASS thats broken or the LCD part that's damaged? (or both?) I've replaced the glass part on my incredible before, the display screen is a separate part, unless they incorporated the 2 together for the slcd version, but my old amoled was separate from the glass, you can buy glass kits on ebay for fairly cheap.

how to identify my htc desire (no working screen)

hi all, the desire i have came in an orange box so its not identified as amoled or slcd. It needs a new screen but i dont know which one to buy, I understand how to identify by removing but i need to buy a kit that contains the tools to get it out, anyway of identifying which one it will be so i can buy a replacement
thanks
If your desire has an amoled screen, then it's written on the box. If it's not, your desire has a SLCD-screen. No guarantee, but this is what I read very often.
He just said he has a orange box without the information.
Sent from my Full Android on Bravo using XDA App
Kryziek said:
He just said he has a orange box without the information.
Sent from my Full Android on Bravo using XDA App
Click to expand...
Click to collapse
He only said it came in an orange box. And with orange box I assumed he meant the provider. So let's wait what he says.
thanks guys the reason i mentioned orange box is because its documented that this box doesnt have the slcd or amoled info on it, so still stuck
thanks
The AMOLED screen shows a distinctive pinkish tint on the white HTC logo screen especially when screen is tilted. When the screen is on a totally black screen LCD shows lights, LED should be fully black. There is no difference in hardware info. Though there is one definite test-Pre 1.21 RUUs softbrick SLCD Desires-but I wouldnt recommend that test.
Of course these wont help a broken device.
your right, doesnt help at all, but thanks
i guess the only way is to buy the tools seperately and take the screen out and see what it actually is and then replace
thanks guys

Categories

Resources