Related
Hi there folks, being a newbie I am sure that I will get some abuse but nevertheless here goes.....
1) What is it with all of this ROM upgrading I keep reading about? I realise there are different versions but does it really make that much of a difference? If so, what version is the most up to date?
2) Does anyone know anything about TomTom? I have been given version 5 (Navigator I think), how does this differ from Mobile 5 version & why does my version not start up automatically when I insert the SD card into my PDA?
If any peeps can give me a bit of an insight in to these queries, I would be most grateful.
By the way this site is really cool, shame I have only just found it, time to catch up........
_________________________________________________________
"Women call me savage, but you can call me anytime....."
_________________________________________________________
Firkin, if your sd card has a directory called "2577" and it contains the correct files then it should start automatically.
!) ROM upgrading .... its basicly all about fixing BUGS, improving performance etc ...etc... same as with a computer, your better off with newer files/programs than older ones (Well most of the time anyway)
Im an XDA 2i user and right now we are all screaming for a new ROM as there are a few problems with the current one.
2)TomTom 5 is one of, if not the best GPS road navigation systems about and will be similar for the Mobile version but i would think a little better.
I didnt know you could start a program up from just inserting the SD card but i might just look into that now lol.
Its ot really normal for a program to start up when you insert the SD card otherwise it might be slightly annoying, well i think so anyway.
Thanks for the info peeps.
As for the SD card/ Tom Tom application, just to clarify, the program doesn't start each time you pop the card in. What it actually does is install the program into your PDA device instead of you having to install the program via your PC & then activating it through your USB/serial link.
Thanks again & keep up the good work!
It seems after reading many posts about upgrading ROM's etc that it is a complete waste of time, as soon as you install the upgrade the users have a load of problems, with devices crashing/freezing/ bluetooth not working etc.... so what is the point. Surely you are better off with your original installation software than some unofficial upgrade meant for some other device.
If it ain't broke then don't fix it!!!
My tomtom card when inseted first time installs the program, each insert following this launches tomtom 5.
Yes, I've decided to take on a mammoth task, welcome to "ROSS"... "Replacment Operating System Structure" for Mobile phones & PDA's =]
The website is located here!
Yeah, you all think i'm crazy "hang on, you can't port Android to X50v!"
Well, not YET, but with help It will be done.
What is android you may ask?
Android is google's open source platform for Mobile phones and PDA's =]
So yes, I plan to create a operating system for X50v to replace WM6 with and allow users to develop/change bits of the operating system they don't like.
There will be a few "flavours"
Lite: Basics, very Basics, just Wifi/bluetooth support, a simple GUI and No applications (just a few settings). This free's up a LOT of RAM + ROM
Medium: The one "hopefully" most people will use, This is the standard one, basic office applications (replacing all the standard WM6 ones) a few games, decent GUI etc.
Heavy: The one that leaves least RAM and ROM available, the one with the most applications + usability, although it may lag a little.
Of course, we're going to build a "super-lite" version first, just to make sure it's flashable to the X50v =]
Maglite_RUS & Football may be willing to help, maybe not, we hope for his help + support throught this project
but first we need a team!!!
If you have any experience in making ROMS for X50v (ONLY, we will work on others after the X50v is done) or developing operating systems (various Linux distro's included) and Java (what the majority is coded in) then please please sign up. I plan to help develop the applications rather than the operating system myself, but I will work on ALL aspects of the project of course
If you're interested, and have found this link of google or something, then don't hesitate to email me here
Feel free to discuss =]
Hi Obsidiandesire...
This could be a great project!
It's very nice to see you're a PPC enthusiast like me...
I'm a PC software developer (not PPC) with quite experience but to start this project we need some black belt coders...
Another Linux project was already started here
http://www.handhelds.org/moin/moin.cgi/DellAximX50 but the developing speed was not so fast...
Another issue would surely be the ROM compaction problem that will kick in also on a different OS.
The only thing that could solve this on x50v would be to hack the bootloader in a way to load OS from SD or CF , so all data will be written on a fast write NAND device... By the way this would mean loosing the internal ROM!
But your approach seems to be the most sensible one, as one would never lose the possibility to startup the phone's default os (windows mobile).
It seems quite an interesting project, i have to admit i have a strong will to help you out, as i am also a professional programmer, however i am not a java, or C developer (long time i do not do anything in C), so i guess i am more of a designer myself
Well, i will keep up with this post and maybe we will colaborate in the future, i feel it's time to have our own software in the mobile's, i hate the microsoft's approach to the os handling.
Glad to see we're getting some interest in this project!!!
Hopefully, soon we could set up a website and start developing =]
who knows, we may be the lucky winners of the google competition and get $10 million! (not much use to me because im british lol)
So, you're Idea would be basically multi-boot?
sounds good, but we'd need to modify the bootloader (maybe hold enter, power + reset to switch to ROSS-Mobile?)
Sounds good! and i've just started learning Java too, so this project could take a while, hopefully, if it starts getting quite a bit of attention, we could move it to other platforms (HTC touch etc) which would make us Gods within the PDA community
I do like the posibilities of Android as it looks like it could make good use of the graphics chip in the X50v and it wouldn't have Windows Mobile lagging it down
How much RAM does it have again? It would be as powerfull as an old PC if you overclock it slightly (700mhz, 32MB RAM, 16MB graphics or something like that) and slap on a minimal OS and you could have your own [email protected] Pocket version! lol
Sorry if i've gone off on a tangent, i'm really excited about Android and it's possibilities.
First steps though, how would you get the DEFAULT android software to boot on the X50v? I think this should be our goal before starting on the project itself
this is cool. if anyone gets this to work i would be happy to be a tester. i don't know much about programming but have flash other devices with Linux.
A bit a info i picked up on flashing Linux on ipaqs is that you had to flash a new bootloader that would boot both wince and Linux. don't know why both but maybe to return to wince because to flash the boot loader you did it with a app that ran on wince and after that you would boot the bootloader and make a serial connection so that you could send the linux distro and erase wince.
Thanks for the info, more help on how to do this would be great! (I could try this on my X50v for testing purposes)
would it not be actually possible to boot the android/linux directly from a storage card? so as to effectively allow users to 'dual' boot?
duke_stix said:
would it not be actually possible to boot the android/linux directly from a storage card? so as to effectively allow users to 'dual' boot?
Click to expand...
Click to collapse
Each time you would boot a os you would erase saved data (hard reset) because you would need the memory were the settings are for each os. but thats is what i think i haven't flash a device for a long time so im out of date on this as far as if they gotten a doul boot win ce and linux but i assume that this will be a problem with win ce and android dual boot.
You would have to put both os in the flash mamory(were the os goes) and find a way to save the settings from a os and store them so that it can load the settings for the other os and vice versa
but you could do it like linux on a palm zire72. i have linux on my zire but linux is on the memory card when i reset the device it will reboot onto the palm os, so no flashing happens just load the bootloader through the palm os and linux kernel loads, but at the same time palm os is hard reseted, this is palm but same linux that is used on ppc. You would need to find a way too load a bootloader during win ce but dont see that this is possible. only one os at a time.
And Obsidiandesire i will try to get an old friend that used to work on porting linux to ppc he might help on the bootloader part but haven't herd from him for a long time but will try hard on finding him. but as long as we get many people this might be possible. i will post later if i find him.(good luck on your leg)
or, the flash memory card from which you 'boot' the android/linux from could actually hold a partition which served as a flash drive/storage drive aswell? so effectively it would mean you would require something like a 1gb or 512mb card, splitting that to allow you RAM and ROM space but i cant see why that would be too difficult. it would just be a matter of tricking the linux to thinking the local on-drive storage is its 'root' drive and the default drive to save to and to completely and totally NOT access any of the WM stuff on the flash memory that is hard-soldered onto the handset.
not sure if this helps, just bandying ideas around at the mo!
duke_stix said:
or, the flash memory card from which you 'boot' the android/linux from could actually hold a partition which served as a flash drive/storage drive aswell? so effectively it would mean you would require something like a 1gb or 512mb card, splitting that to allow you RAM and ROM space but i cant see why that would be too difficult. it would just be a matter of tricking the linux to thinking the local on-drive storage is its 'root' drive and the default drive to save to and to completely and totally NOT access any of the WM stuff on the flash memory that is hard-soldered onto the handset.
not sure if this helps, just bandying ideas around at the mo!
Click to expand...
Click to collapse
I see what you mean, but then the card might not be recognised in windows =/
However, denying the operating system access to writing the rom (and store everything in RAM) might work, but all settings would have to be stored on the SD card which could lead to a slow application.
The SDK (with the sample apps) itself is around 100MB, but Methinks that the final OS will be around 30MB (Without any apps)
Expanding on the partition Idea, what about partitioning the ROM itself? This might require a special WM6/5/CE ROM but one flash compared to many (everytime the device boots) could be worth it, and it could get round the setttings loss if we restrict each one to not write over the other?
My leg is getting better thankyou, seems like a severe muscle strain (The doctor said) so i should be back in school tomorrow.... great
i see what you mean by the card not being recognised by windows and offer a simple solution:
have a DEDICATED card for android and a seperate card for storage under WM.
to be completely honest with you, theres people on here spending hundreds and hundreds of pounds to have the latest device (and im one of them) im sure they wouldnt mind spending an extra few pounds for another memory card which would allow amazing functionality without actually jeapordising their current WM install (so they can have an install of WM6 to fall back onto)
what i propose is the following system:
1) MEMORY card formatted and partitioned to allow more or less the same sort of structure of memory/ram as the onboard memory does
2) INSTALL the actual android/linux to the memory card utilising the space as you would the hard-soldered memory on the phone without actually modifying the handset itself in any way whatsoever.
3) THIS method allows people to effectively dual-boot android/WM6/5 without the danger of them actually ruining their WM6 install, effectively using the android/linux platform to play about with whilst having the original WM6 to fall back onto for day-to-day usage.
shouldnt be too difficult to accomplish, im sure a modified bootloader would do the job pretty well, cant see why without the help of Olipro and Pof this cant be done!
LETS GET THE BALL ROLLING!
Seems good, but what, have the SD card for storage and CF for the OS? 'cos you obviously can't have 2 SD cards in the X50v (unless there's a CF-SD card adapter lying around somewhere on the web or on a shelf)
But as far as getting the ball rolling, yeah!!
Work on having the vanilla build of android (one included in the SDK) running before starting from scratch!
Obsidiandesire said:
Seems good, but what, have the SD card for storage and CF for the OS? 'cos you obviously can't have 2 SD cards in the X50v (unless there's a CF-SD card adapter lying around somewhere on the web or on a shelf)
But as far as getting the ball rolling, yeah!!
Work on having the vanilla build of android (one included in the SDK) running before starting from scratch!
Click to expand...
Click to collapse
another problem would be on getting the bootloader to see the cf card and that maybe a problem, we would need to add one of the slots(sd or cf) to the bootloader and let us choose what os to boot or what memory to boot(sd,cf, or rom mem).
the other way if we don't want to modify anything would be loading a bootloader during winidows mobile.
i hate this time difference
i cant see why you cant actually have the android on the SD card and stick to having the CF card as storage for both WM and Linux
that way, it would mean a sort of 'standardising' for people to port over to other phones which use SD based memory cards.rather than making it bespoke to CF capable devices (of which there arent many!)
Yes, the problems will be a rebuild of the bootloader to recognise both SD + CF cards.
And loading the bootloader under Windows mobile could be good, but you'd then have to terminate WM (which could be a problem)
And which part of the USA do you live in? There's probably an 8 or 9 hour time difference :-(
@dude_stix
well, even so, you'd need both SD + CF storage, which AGAIN could be a problem. But (in my experience) CF is more expensive, and considering Android will take up less space, It seems a more viable option (in my example, a 32MB CF card would be useless if I installed Android on a 2GB SD card and nullified the rest of the space for use (which could happen))
I think the easier option would be to modify the bootloader to look for images on both cards and install on the one with the image on it.
What about drivers etc? Obviously these would be needed for most things.
drivers????
thats all i got but it would not be hard if htc releases its android devices soon so we can get ideas from them. still today linux devices have problems with bluetooth, wifi, backlight, sd, etc...
posted on 5:23 pm here in south central US (Texas)
That's a 6 hour time differance :/
The Drivers being the things (mainly DLL's in WM) that controll the wifi/bluetooth etc.
This is why Linux has problems with them, i think they have to rebuild their own or something, which could pose a problem.
Do you think we should set a website & Forums up, or is it too early at the moment?
ultraprimeomega said:
drivers????
thats all i got but it would not be hard if htc releases its android devices soon so we can get ideas from them. still today linux devices have problems with bluetooth, wifi, backlight, sd, etc...
posted on 5:23 pm here in south central US (Texas)
Click to expand...
Click to collapse
Yeah... ...Drivers!!
This will be the hard one...
With WM6 cooked rom it was easy... We could reuse WM5 drivers written specifically for that device (x50v and x51v needed a specific driver for the 2700G chipset).... So if there won't be any Smartphone with such chipset with Android pre-installed it would be very hard to write that drivers from scratch... By the way somewhere I remeber I found a PowerVR driver source code for Linux that could be useful to do the job...
Cheers
Antineutrino said:
Yeah... ...Drivers!!
This will be the hard one...
...
Cheers
Click to expand...
Click to collapse
Isn't the drivers' job what the linux kernel is supposed to do? Why don't you go grab the kernel from the gpe/opie project and add the android image to it, partition the sd card with a windows and a linux partition like the other linux guys do, load the ramdisk like they do and see if it works. At least they have a start on the drivers for the Axim.
wovens said:
Isn't the drivers' job what the linux kernel is supposed to do? Why don't you go grab the kernel from the gpe/opie project and add the android image to it, partition the sd card with a windows and a linux partition like the other linux guys do, load the ramdisk like they do and see if it works. At least they have a start on the drivers for the Axim.
Click to expand...
Click to collapse
Well, this could be a start indeed, now how do we get android actually ON the x50v??
does any one know of any android 2.0 cabs for vogue
There is a port but it has very limited functionality. Also, it does not come in cab. You have to place a bunch of files on the root of your SD card and run a program called haret.exe which will load the root file system as well as the kernel to run the OS.
Go to the general vogue section. You will have all the necessary info there. This section is only for WM upgrades.
every time in try it that way it wont work and i follow the insructions exactly and i did find a cab and it worked i tryed switching out the files but every time i try to run it it says failed to find system.img even though it named right and on the root of my sd
The cab version is probably a year old now. The files that were in that version will no longer work with current roms. There isn't a current all-in-one installer that I've come across that will run current versions of Android.
The new system images come with a .sqsh extension.
As the previous poster mentioned, the Vogue general forum has more Android related information.
Also, in case you guys are interested, dzo just came out with a flashable version of Android for the Vogue. In other words, you will install Android to the NAND rather than the SD card and wipe out WM in the process.
http://forum.xda-developers.com/showthread.php?t=593786
It would be nice if someone were to come up with a cab that installed android
But unfortunately it would be a lot of work and instead you have to run it on an sd card via haret (though its not that much more difficult)
And zen just came out with a new android 2.0 (eclair) build so you should go check that out!
kiwilime said:
It would be nice if someone were to come up with a cab that installed android
But unfortunately it would be a lot of work and instead you have to run it on an sd card via haret (though its not that much more difficult)
And zen just came out with a new android 2.0 (eclair) build so you should go check that out!
Click to expand...
Click to collapse
Someone did make a cab. http://www.myhtcphone.com/Android120208.CAB from here http://www.myhtcphone.com/ it is old but it has been done and it does work.
Hi all,
I have an ASUS R600 GPS running WinCE 5.0 core. I unlocked it using AsusPocket (ASUS customized version of MioPocket to keep things such as bluetooth) and everything seemed fine.
However I'm running against a "low memory" errors when running certain navi software such as Navigon and iGo. The device has 64 Mb of RAM which should be plenty for these, as my cheap Omnitech has the same amount and has no problems.
With help of MioPocket guys, I traced it down to a massive \Windows in this device's ROM. It is like 25 Mb as they dumped not only every dll they could find there, but also eg a lot of big wav and bmp files. Couple wav files are close to 1Mg each! Since according to these folks \Windows just gets copied from ROM to RAM on startup, I end up with far less free memory to play with than I'd like.
I'm new to ROM cooking but with some help I'm sure I could do it. To keep things very simple I was thinking of just replacing these big wav files with a small one. This way the file count and names wouldn't change and I wouldn't run a risk of ever running into a "file not found" condition. I really don't care if on startup the device plays a simple "ding" as opposed to 20 sec sound. Since soft that I want actually runs and only gets into low memory condition on more complex route recalculation or reality view screens, I think this would be enough to get me over the hurdle. Of course, any checksums will need to be regenerated as needed.
So, at this point I have downloaded upgrade ROM images for this device. Is that something that can be disassembled, modified as described above, and put back together? I tired naively unleashing dumprom on one of these .bin files, but got back "unable to determine loading offsets" error. I guess I shouldn't be surprised as at this point I don't know what I'm doing...
Can anybody offer any help to me? With all the amazing things I read on this site people doing with ROM modifications, it looks like what I'm trying to do should be a walk in the park. Am I right trying to go from upgrade .bin file? Or should I get some tools to read off the device? Please help.
Btw. if anybody'd like to peek at this upgrade bin, it can be downloaded here: hxxp://support.asus.com/download/download.aspx?modelname=R600&SLanguage=en-us, in the firmware section, version 4.3.0 and version 4.8.0 for NA users. Unfortunately no direct link.
Thanks in advance
mamon
Hello,
I need some help. Install its Android OS, but after he reset my Kaiser again charged WinMo OS. My question is whether it is possible to choose which OS to load first or with any program or edit the file to indicate to launch the first Android.
Sorry for my bad english :S Use Google translator
If you have installed Android to SD card and use Haret.exe then it will always reboot to WM.
You must install to nand if you wish to boot to Android only, which will wipe WM totally and replace it with Android.
The guide stickied at the top of the forum is a good tutorial in doing this
That does bring a good point to my mind though, we could create an exe that loads at startup of wm to auto load haret and startup if the user doesn't cancel in so many seconds (like grub). I keep WM on my phone so I can easily change my droid version and also I know everything works including opening office files (actually that's the biggest sticking point for me keeping it).
Thanks for support. Today I try to flash via NAND method.
Kind Regards
Lybomir
I flash my Kaiser with latest zImage-2.6.32-froyo-09-09-10_21 from here http://it029000.massey.ac.nz/vogue/files/?C=M;O=D and my device loading Android OS very slow, and big problem is : Phone go in screensaver and I try to unlock and screeen stay only in white light, no picture, no widgets... total block. Only solution is it a use Soft reset button or remove batery
Maybe you choose the wrong panel type?
I can read in your signature Duo Boot so I guess you installed onto the SD and use Haret to run Android.
If so, you have to edit the default.txt file locate in ANDBOOT folder and modify the value following htckaiser.panel_type.
You can specify 1, 2 or 3 (most Kaisers use panel type 2)
Wrong panel type may lead to awake problems or wrong colors...
The excessive slowness may be due to a slow SD. Which class is it? Use at least class 4 SD.
---- EDIT -----
In case you already flashed to NAND, to change the panel type you have to choose the right kernel (the kaisimg file) or you can edit the one you flashed following instructions and links you can find in #4 at http://forum.xda-developers.com/showthread.php?t=680518
obviously you have to reflash the kaisimg.nbh but you don't need to flash Android again
I try with 1,2 and 3 but every time show me a this problem, and now i run HaRET and in 2 from 3 times phone block and not response only Soft reset work, and if case phone load complete Android and again in screen seaver system not respond... ;(
I flash my phone with ext2 partition on my sd card/ class 4 8 GB SDHC/ and try with system and data on sdcard an again freez white screen/
Sorry for my bad english
dlink.bg said:
I try with 1,2 and 3 but every time show me a this problem, and now i run HaRET and in 2 from 3 times phone block and not response only Soft reset work, and if case phone load complete Android and again in screen seaver system not respond... ;(
I flash my phone with ext2 partition on my sd card/ class 4 8 GB SDHC/ and try with system and data on sdcard an again freez white screen/
Sorry for my bad english
Click to expand...
Click to collapse
May you try to install a different build and see if you fall into the same problem?
BTW, just after installing, don't start playing soon with the device: initially skip all settings (touch the android, don't set google account and so on) and leave the phone quiet for at least 10-15 minutes: some builds need to copy file to the cache and playing with the device may interfere with this operation leading to unpredictable effects...
Let we know...
It is slow because you installed it on sdcard.. both partition.. if you are on nand. Try install both partition on nand partition.. and try hawks soad rls 3 as me.. its fastest build for kaiser.. and I haven't ever problem with white screen ata awake.. try it in that haws soad ion build.. you can finf it in that forun.. just find it
Sent from my HTC Kaiser Ion using XDA App
I find a solution! Later I post how find solution
Thanks on every in this thread to help me!
dlink.bg said:
I find a solution! Later I post how find solution
Thanks on every in this thread to help me!
Click to expand...
Click to collapse
You're welcome
And I'm waiting to know
Don't suppose any of you have actually seen this thread?
Gen.Y DualBOOT v1.0.6.0
Should work fine on Kaiser, certainly works fine on other devices, such as Diamond, Blackstone etc
zenity said:
Don't suppose any of you have actually seen this thread?
Gen.Y DualBOOT v1.0.6.0
Should work fine on Kaiser, certainly works fine on other devices, such as Diamond, Blackstone etc
Click to expand...
Click to collapse
Hi Zenity... Yes, know that piece of software.
But as You have to boot WinMo (Yes, I Know, not all the services need to be running but system must be loaded and started, GUI must be running and so on) in order to DualBOOT can start, I can guess it's only a partial time-save... isn't it? Did You tried it?
Have not tried it on my Kaiser, since it is Nand flashed, but I think it is what was being asked for really, a way to boot either WM, or straight into Android on SD.
I don't think it will ever be possible for both WM and Android to co-exist on nand, since there simply is not enough room on the internal memory for both.
It is a time saver on other devices I have tried it on, Diamond, Blackstone, however since neither of these devices is nand-flashable this is more what Gen-Y's dual boot was intended for.
If it was possible to run WM from SD then we might be able to truly Dual Boot, in a similar fashion to Windows/Linux on PC, but as far as I know this is not possible either.
zenity said:
Have not tried it on my Kaiser, since it is Nand flashed, but I think it is what was being asked for really, a way to boot either WM, or straight into Android on SD.
I don't think it will ever be possible for both WM and Android to co-exist on nand, since there simply is not enough room on the internal memory for both.
It is a time saver on other devices I have tried it on, Diamond, Blackstone, however since neither of these devices is nand-flashable this is more what Gen-Y's dual boot was intended for.
If it was possible to run WM from SD then we might be able to truly Dual Boot, in a similar fashion to Windows/Linux on PC, but as far as I know this is not possible either.
Click to expand...
Click to collapse
Yes, of course we haven't enough NAND to have both OSes!!!
What I was thinking to (but I'm a lot far to inspect WinMo booting sequence...) is if may be possible to wedge a sort of bootloader running BEFORE the OS loads or in the early booting process and letting we choose to boot WinMo (in NAND) of Android (on SD).
At present moment I've Android running from SD but kernel NANDed (I've got problems running out of NAND and no time to solve them so I'm using the solid build previously installed on SD) so Kaiser boots quickly... and this confirms it's possible boot SD Android without having to load WinMo or Haret. The more relevant matter I can see is that we have to find a way to wedge the bootloader without have to manual modify the WinMo ROM (virtualization is far from be considered on such devices...)
I suppose this is just a "mind exercise" (Sorry, I don't know how to correctly translate an Italian common saying...
Mind exercise describes it perfectly
Not sure why you would run out of space on nand, unless you are loading a lot of apps, and there are ways to run android that may help with that, such as apps2sd, or data on SD partition.
If you must have WM then your only choice would be using Haret.exe, and the most efficient way to dual boot we have at the moment is the Gen-Y solution, which is not ideal, but does offer at least part of what you seek.
The Android bootloader we use (tinboot.s) is not flexible enough to allow dual booting, but may have some information that may be of some use in this
tinboot thread
See what you think anyway
Sorry, I was not able to be clear... I apologize for my English...
When I said "I've got problems running out of NAND" I intended to say "I've got problems - very bad performances - when Android was running from NAND"!!!
Maybe we are a bit OT...
BTW, I was far from software developing for a long while and never developed low level software for Linux/Unix... but in the past I messed up with Z80, 65xx, 68K and x86 platforms's assembly
Recently I need to approach software developing again (but at a really different level...)
I'd like to have spare time to start again, as this world attracts me more. Maybe I'll give it a chance...
Let me understand... tinboot is actually used bootloader?
BTW, just to be clear... I don't need WinMo and I'm giving Android a chance to revive my Kaiser. I'm looking for a fast and stable build and actually I'm running VaniljEclair RLS11 (Yes, I know, I'd try your Polymod 2.1D build... )
Tinboot is the bootloader we use to get android in nand, not being a coder my understanding in limited, however I did think that thread may have useful information for anyone interested in the low level workings of out devices.
I assumed you meant running out of space on nand, lol, i see now what you mean, no need to apologise for you english, it's fine
zenity said:
--- CUT ----
however I did think that thread may have useful information for anyone interested in the low level workings of out devices.
Click to expand...
Click to collapse
And you're right... it's a useful starting point and I'll read it accurately...
Unluckly, I need a lot of spare time (and I don't, at present) to build a solid knowledge base and to start developing for Android.
yes there should be plenty of room for both oses on Nand, I still have over 90 mb on my wm6.5 nand install with come extra apps in there. So if you stripped down both oses you could easily fit them both on nand and still some space left. But then you need to have a boot loader that will be able to load both oses. I think I heard someone say somewhere they are using grub to boot android from nand, that can boot windows also with the right configuration, that would be where to start.