Title says it all, i'v'e spent the last like 6 hours trying to set up my SD card for apps2sd. I'm using this rom: http://forum.xda-developers.com/showthread.php?t=715180&highlight=apps2sd Which does infact support a2sd. Just need help with this SD thing.
I want to set this up by atleast sunday, going on vacation, want to buy a bunch of games for the plane ride.
Help Please!
The easiest way by far is to use GPARTED in Ubuntu.
Just plug your phone up via usb and go.
There is a guide for it somewhere in the slide forums.
As faud said, go to the Ubuntu home page and download the live cd, you can boot straight into Ubuntu without having to install it, and then run gparted.
Is your sd card already formatted with an ext2 partition? If no, by all means use gparted, as the others have said. It will re-partition and re-format the card in one easy step.
If you already have an ext2 partition (and possibly have apps already installed), then one Linux command will do the trick (without destroying what you have on your ext2 partition.)
Code:
#tune2fs -j /dev/<foobar>
Where <foobar> is the device node for your ext2 partition (should be something like sdb or sdc, etc.)
Just use ROM Manager to do it.
Related
I've been trying tirelessly to get darktremor a2sd to work on my phone for a month. I've tried using AmonRa partitioning to ext3 and ext4, I've tried manually partitioning, I've made sure the ROMs support it, I've done everything. Except partitioning through Linux (Ubuntu). Today I noticed that when I try to mount the ext partition, whether ext3 or 4, in CWM or AmonRa, it says it can't mount the mmcblk1p2 (no such file). But when I run the check in Terminal for a2sd, it says it recognizes the ext but can't mount it. So I tried partitioning through ubuntu, sure enough I format improperly (don't know how) and now the card is unrecognizable by my phone, ubuntu and windows 7, meaning I can't properly format it.
So, if anyone can fill me in on why this just doesn't seem to work for me, please let me know what I'm doing wrong. i just want some damn apps2sd and a functioning ext partition.
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Kneros said:
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Click to expand...
Click to collapse
Almost all custom partition managers can do this in Windows-Partition Magic, Paragon, Or Gparted with VMWare
They can, but not on SD Card. Windows doesn't support partitions on memory cards. I tried Partition Magic, Paragon, Easeus, none of them work.
I didn't try Gparted with VMWare tho, you might be right about that.
Kneros said:
They can, but not on SD Card. Windows doesn't support partitions on memory cards. I tried Partition Magic, Paragon, Easeus, none of them work.
I didn't try Gparted with VMWare tho, you might be right about that.
Click to expand...
Click to collapse
Paragon works for me on Windows..And Gparted is what I use
Strange, it didn't work for me (see attached pics).
Just install the latest ClockworkMod, or Amon-RA and do it through recovery.
Is it useful to have an ext3 partition on SD card with stock 2.2 rom ?
fblasot said:
Is it useful to have an ext3 partition on SD card with stock 2.2 rom ?
Click to expand...
Click to collapse
It's useless, you need a ROM that supports it.
quick question - if I create an ext3 partition using this method or any other way, and then move the apps I had on SD (the old way) back to internal, will it then move them to the ext3 partition automatically? I just want to make sure I have this right myself before I attempt it.
I'm using Oxygen 2.3 ROM RC-6 which supports apps2sd etc.
thanks in advance for any replies.
Kneros said:
Strange, it didn't work for me (see attached pics).
Click to expand...
Click to collapse
See mine..
I'm using 9.0 Pro, you're using 10.0 server, if that helps..
I still prefer Gparted though..On Vmware.
Choronzonix said:
quick question - if I create an ext3 partition using this method or any other way, and then move the apps I had on SD (the old way) back to internal, will it then move them to the ext3 partition automatically? I just want to make sure I have this right myself before I attempt it.
I'm using Oxygen 2.3 ROM RC-6 which supports apps2sd etc.
thanks in advance for any replies.
Click to expand...
Click to collapse
The a2sd+ script is built in, it executes at installation. Best way would be to use Titanium to backup ur froyo a2sd apps, wipe+install a2sd+ custom rom, use the option of Titanium, to move to sd.
and how do you want to put data on the ext3 partition ? ... you will need linux, its the best way...
Kneros said:
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Click to expand...
Click to collapse
EDIT:
Didn't work, SD could not be mounted under Android or Clockworkmod
Did the partitioning under Clockworkmod
partition works, but..
i tried minitool and easueus, both partiotion my 16 gb sd card, but...
I use miui rom, xpart(data2ext). the script works, but the phone is slow as ........
someone any idea?
i also have a 8 gb card, same partitions, but no problem..
any idea how i can tets my 16 gb card?
Minitool is crap. Haven't used easeus but its still under Windows, which is a no no
Gparted is the only decent tool that will nicely partition an ext partition on your sd whilst aligning it properly. This is both my personal and professional opinion.
Now because it doesn't run in windows, its a bit more long winded but so much more worth while.
Virtual machine (vmware player) is the best method. There is a link to a guide to set this up in my signature
Sent from my HTC Desire using XDA App
Kneros said:
This post is for people scared of Linux (like me)
I finally found a way to partition a SD-Card under Windows. I tried more tools, but only one was able to work with SD-Cards. Here's what you need to do:
1. Download and install MiniTool Partition Wizard (google it, i cant post links)
2. Resize original FAT32 partition to make room for the ext3 one. If you have enough space, the data on the card shouldn't be affected, but make a back-up just in case.
3. Create the ext3 partition on the space made available and apply changes
The first partition should be FAT32, and the second ext3, make sure you have them in this order.
Click to expand...
Click to collapse
Minitool partition wizard is a wonderful and practical software. Thanks!!
Hi guys
I just bought a new 16gb class 6 Adata SDHC card and need help partitioning it in this way [Fat + 1GB Ext4 + 0.3GB Ext4 + 0.1GB Swap] as this is required for RCSMixHD rom which i want to flash...currently i am on leedroid 2.2c app2sd+ and a 4gb class 4 card....tried googling but couldnt find anything that worked for me....also how do some guys keep changing roms ? this task seems so tedious
BTW i have tried ubuntu method, had a ubuntu 9.04 disc - booted with it and opened gparted, but gparted doesnt detect my SD at all...ubuntu detects it though
You only need one its much faster with it anyway I've done a couple of random reboot and all is super fast and stable
Sent from my HTC Desire using XDA App
ohh...i dint know, but dev of RCSmixHD suggests those partitions, also please suggest how to partition the memory card
Thank you
Just did it via GParted method. I alredy had an ext3, so i did not have to format the fat32 - just upgrade to ext4! I can tell it fast
Also if you use the data2ext, then it is better to have more partitions.
There is a post in RCSMixHD how to use GParted.
create a gparted boot disc [ i used magiciso] then turn off your pc. restart your pc and get into the boot mennu [its f2 for me] set your cd drive higher in the list then your hdd. save changes. restart with disc in drive. it will load linux. while it is still loading, atach your phone in disk storage mode. i found if i hooked in my phone whengparted was completely loaded, it owuldnt recognuze my phone but if i had my phone loaded and ready when gparted finally fished loading, it would recognize it right of the bat. creating partitions is easy to do. and i recommend rc mix hd. i use it myself and its the best all around hd rom i could find and the only 1 i havent tried yet is cool hd v2a.
gparted live disk worked...thank you guys
I have been trying gparted on my sd card for the whole day, it goes on well, but CWM say can't find ext partition?? What to do??
I am getting this error while D2ext rom in CWM recovery
"Can't mount /dev/block/mmcblk0p2
invalid argument
Error mounting SDEXT:! "
Any idea what to do??
hei shakeebkazia
take contact I can help you with those "normal" upload sits.
[email protected]
Hello there! I hope that I am not annoying you, but I am having issues with partitioning my SD Card, that have not yet been discussed here, so a step by step guide would be highly appreciated, because otherwise I am just too stupid.
I have a fully unlocked HTC Desire with alpharev's S-OFF, most recent radio & stuff. Partitioning my SD with Clockworkmod Recovery 3.0.0.5 just won't work, it DOES something, but when plugging my Desire on my PC, it shows me ONE FAT32 partition, just as it was before, which takes up all the SD's space. Neither does it work with ROM Manager.
It got really weird when I manually partition it with GParted on my Ubuntu:
My Setup was:
1 FAT32 Partition, size: maximum what was left.
2 EXT4 Partitions, one 768MB, one 256 just as recommended for DATA2EXT HERE
No SWAP Partition.
Then my sdcard can't even be mounted by CWM-recovery - it says wrong parameter
I can still access it via 'mount usb storage', and fully access and format it in any way I like.
Any hints, step-by-steps or any help at all on how to correctly partition my sdcard? GParted there are settings like partition tables and stuff. what should I choose to make my SD Android-mountable??
EDIT: I think I got it. haven't yet tried it, but I think my fat pertition exceeded 2GB, gonna try later.
hy, don"t know really how it works with gparted (i m currently using amonRA which allows partionning sc card) but a single search with my friend... google gives me that result.
I think this could helps you considering your post.
http://forum.xda-developers.com/showthread.php?t=557590
have fun ;-)
CrisisCorE said:
Hello there! I hope that I am not annoying you, but I am having issues with partitioning my SD Card, that have not yet been discussed here, so a step by step guide would be highly appreciated, because otherwise I am just too stupid.
I have a fully unlocked HTC Desire with alpharev's S-OFF, most recent radio & stuff. Partitioning my SD with Clockworkmod Recovery 3.0.0.5 just won't work, it DOES something, but when plugging my Desire on my PC, it shows me ONE FAT32 partition, just as it was before, which takes up all the SD's space. Neither does it work with ROM Manager.
It got really weird when I manually partition it with GParted on my Ubuntu:
My Setup was:
1 FAT32 Partition, size: maximum what was left.
2 EXT4 Partitions, one 768MB, one 256 just as recommended for DATA2EXT HERE
No SWAP Partition.
Then my sdcard can't even be mounted by CWM-recovery - it says wrong parameter
I can still access it via 'mount usb storage', and fully access and format it in any way I like.
Any hints, step-by-steps or any help at all on how to correctly partition my sdcard? GParted there are settings like partition tables and stuff. what should I choose to make my SD Android-mountable??
EDIT: I think I got it. haven't yet tried it, but I think my fat pertition exceeded 2GB, gonna try later.
Click to expand...
Click to collapse
Not overly sure if this will help but .....
A long time ago when I first started tinkering with roms I tried partitioning my SD Card for Apps2SD but whatever I tried (Partition Magic, ROM Manager, GParted) it would get halfway through partitioning and then fail sometimes even leaving me unable to access the card from phone or PC. Spent several nights trying to sort problem then found out that some makes (possibly cheaper but think Transend are mostly the bad ones?) don't like being partitioned, why .... I have no idea. Anyway bought a new one 16gb Lexar Class 6 card which partition first time and had no problems since. Hope it helps and best of luck!
Are you to create "primary" partition or "logical"?
Please direct me to an idiots guide to SD partitioning...
I have been flashing my desire since the summer. And well i forgot how i initially setup my SD card.
I wanted to treat my self to a new CLASS 10 SD card. But when it came to partitioning the card i got lost.
Is it as simple as using clockworkmod to set partition size to 1-2Gigs? and swap to 0?
With reference to Ext2,ext3 and ext4 are these all multiple partitions? None of these where options within clockwork or rom manager
Anyway i did my partitions using clockwork and installed a new rom i had never used before runnymede. I found performance extremely sluggish and slow. Of course i did 3 new things at once. new card,new partition and new rom... could be one or all these causing me headaches..
Sorry to ramble on. Bottom line:
- Could i be kindly directed to a SD partitioning guide?
- Is the Desire compatible with 2,4, and 10?
http://forum.xda-developers.com/showthread.php?t=1016084
[Video Tutorial] Noob Proof Everything Desire Guide UPDATED [04/04/11][Video Tut]
hope it helps.
The class 10 SD card should be OK with your desire.
The people in the know mostly recommend not using ROM Manager to partition SD cards. I would suggest try using GParted.
In terms of ext2, 3, 4 - I would recommend ext 3 for your SD card partition - it is safer than ext 2 partitions.
I would suggest an ext 3 partition size of 1024mb or even 2048mb (that should cover you for most present roms and most future roms).
I am not as knowledgeable as some of the other guys here but I will give you an useful link:
http://www.techcredo.com/android/tu...-for-a2sd-with-gparted-on-a-windows-pc-ext234
I usually create a bootable GParted USB drive and use to partition my SD cards.
I hope that helps,
KKH
I have been trying to create an ext4 partition using GParted. I did all necessary steps - will quickly run thru, just so you know:
1. Burnt ISO and accessed thru boot menu (running XP/SP3, btw)
2. Deleted existing allocation.
3. Created new primary partition as FAT32
4. Allocated "free space following" as 1024
5. Specified the unallocated memory (1024) as ext4.
There was no error in the operation.
However... When I tried to load stuff to the SD card, Windows prompted me to format the card before using. It made no sense but I couldn't do anything. And by formatting it, I lost everything that GPL had done in the first place.
I went over the process again, to no avail.
Does anyone know where I've possibly gone wrong? Please help.
Which recovery are you using?
I had the same issue, vista kept asking me to format SD card before use.
I fixed this by making my first partition in GParted the fat32 and the second partition ext3.
I think windows accesses the first partition by default and is happy with fat32.
If your ext4 was the first partition, windows would ask to format that ext4 in to fat32 before use.
I hope that helps.
thanks i should be good to go now..
TKG26 said:
thanks i should be good to go now..
Click to expand...
Click to collapse
If you install 4EXT Recovery, you won't ever need a bootable disk to partition your SD card. You'll be able to do it straight from recovery I suggest you to give it a try!
My recovery is 4ext and I used this recovery to make partitions of my class10 sd card.
I also use this recovery to align my partitions.
You can also use the freeware "minitool partition wizard" under win xp instead of gparted.
Good luck.
harm007 said:
You can also use the freeware "minitool partition wizard" under win xp instead of gparted.
Good luck.
Click to expand...
Click to collapse
If the OP uses this tool, he needs more than good luck. It's like rootSU says in his sig: "Don't be lazy and make GParted your first choice...". So please do not trust in windows software which wants to handle linux partitions.
Use rom manager. Simple as that
Sent from my Full Android on Bravo using XDA App
4ext recovery and have not gone back. Does all the dirty work for me.
Sent from my HTC Desire using Tapatalk