Ok this might sound a bit dumb to you guys but I'm having a little situation here.
I got tomtom 5.1 and just got the glabalsat bt338 receiver.
I have paired the device with my xda as I have paired a nokia BT headset.
When I switch on the nokia headset and bluetooth, the pda and headset establish a connection automatically.
I would like to do the same for the bt338. As soon as the bluetooth is on, it should establish a connection.
I am not able to do this. I have to click on the bluetooth manager, double click the bt338 for it to establish the connection. Then I have to exit bt manager and turn on tom tom. Still tomtom does not detect the GPS receiver until I click on the GPS device settings and select OTHER BT RECEIVER and then select Blutooth receiver on COM5.
Only then does the GPS show any life.
I would like to know how to get the BT338 to work by just turning on TOMTOM.
It should authenticate and establish the connection on its own, and by the time its up, i should be able to input a destination.
Confusing? No?
easy there mate, give it time....once you have the BT338 paired with your handset, switch everything off.
then 1st switch on your BT338, then switch on your PDA...start up TomTom and leave it for at least 1 minute...it should switch on Bluetooth automatically and connect to the BT338, i had this issue and the 5.1 update solved it...let us know if successful.
Hi, I've a problem with my qtek 8020 with 2.2.32.23 rom.
My smartphone doesn't recognize bluetooth car handsfree (metablue) automatically, after a pairing and a connection (that run perfectly) when I turn off the handsfree or the 8020, and put on, the connection doesn't start automatically, and I must cancel the connection and re-pairing again.
The handsfree runs perfectly with a symbian phone, therefore it's probably a bluetooth stack problem of my 8020.
Please, has anybody a solution?
Thanks all.
Hi all,
i am runing my trinity with WM6 and AX3l's rom. my issue is that i cant connect to my car stereo which is a pioneer DEH-P55. My trinity see's the stereo and gives the option for hands free but the stereo cant detect the trinity. my device is visible to others but the stereo wont pick it up. Any suggestions for a fix on this would be appreciated.
thanks
corm
maybe you have to push a button on your radio to activate first time pairing, that was the solution for my bluetooth headset.
(pairing from both sides)
just a suggestion, maybe it helps.
Try the Jetware bluetooth extension it has a 30 day trial and worked for my Alpine headunit its at http://www.jetwaremobile.com/
Thanks for the replies, but still no luck. I can pair other phones to the stereo but not this. Are there any settings that i may need to activate on the device that i am missing? its abit infuriating as i need to get this up and running as soon as.
rgds
Corm
activated "receive all incoming beams" ? its in settings/connections/beam
its already activated stormyb but thanks again for helping.
I always had problems using bt and irda...
I never succeed send/receive any file using my pc (my pc irda always worked fine with others devices). Beam enabled on commManager and on settings "receive all incoming beams".
When I try to connect (pair) using (htc) BT I get this error: the connection failed or the passcode is incorrect...
---
One time I tried to send a file to a nokia phone and I needed 30 min to succeed: restart phone, restart BT, restart beam, restart phone, restart nokia, restart BT, restart, restart, ....
Now I'm using the radio 1.46.00.11, rom eLiAs2.11wwe (before I was radio 1.38 and udk rom) and when I pair from htc, on pc I don't receive the pin request. If I pair from pc, I see the request for pin no htc but when I type it: "the connection failed or the passcode is incorrect".
Only one time I was succeed pair (and saved on device list), I typed 3 times the pin code, but after I can't transfer files...
From pc, I see the htc on the device list, if I try the ftp service, htc ask me: "xxx wants to connect with your device using bluetooth. Do you want to add XXX to your device list?" I answer yes but when I insert the pin, the pc give to me this error: "error establishing the connection"
If i try the voice gateway, after type the pin on htc I get this error on pc:
"the remote device closed the connection"
Using this last rom, when I try beam a file, I can't see my pc irda (using the udk rom I can to see but without success), I only see my pc BT but always "failed" the connection.
Nobody has the same problem?!
What bluetooth comms are you using, windows or Widcomm's?
I installed widcomm onto my laptop as I was suffering the same problems as you mention and I couild not get a bluetooth serial port setup either, once installed and restarted the pc then I just powered up both BT's and set the phone to visable and the laptop found it straight away with all the services and could setup the serial port.
I seem to recall there are numerous problems with most BT's when using the default windows drivers etc..
HTH's
hi, I'm using widcomm...
I didn't test again a bt headphone, but I have problems trying to connect to a nokia phone for example (n95, n73).
The irda never works... I tried too with a nokia phone and a remote control software for wm6... nothing...
All ok using headset BT...
I installed blueSoleil BT driver and now it is ok.
same ppc, same rom, same problem with my bt bury in the car and with other ppl's triyng to bt connect to my ppc. i can "see" them they can "see" me but there is no transmission TO me. I can send.
i am using the bt phone (bury) but onlt when I initiate the connection. i think it's a rom bug.
Hey Phone connects fine to my car, but it doesnt seem to auto connect? I have to go into settings and press connect everytime despite telling it to auto connect. How do you fix this?
Id guess its because the device isnt discoverable? im not too sure
I've also a mk7 2010 fiesta with the usb bluetooth kit. Almost always it works automatically, assuming I've bluetooth on (but not discoverable) - give it sometimes up to 30s and the bluetooth icon illuminates on the Fiesta's HUD. Only once had issues with it forgetting and needing repairing.
Hello, I want my car to say a welcome message by tasker Via voice, as soon as my phone connect the vehicle via bluetooth. However, although my phone is connected, tasker sees Bluetooth connections as closed and returns with an error like this. "sorry no data available on paired bt devices."
How do I get Tasker to detect that bluetooth is turned on.
Device: A-media Px5
Mcu: 3.30 Mx
BT: WQ_BC6
Thank you to everyone who has already helped
Sorry. For Google translate problem.