Apps2sd Card Help - Desire Q&A, Help & Troubleshooting

Can any 1 help ive just rooted my phone to use the apps2sd, now when im opening it, it says that my sd card isnt partitioned and to do it now, on the phone, which doesnt work.
What im wanting to know is how to partition the sd card and how does the apps2sd card work?

Try this:
androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/

You can partition from recovery. Note you need to back up the sd card as you will lose everything. You have to create 0 swap, 512mb ext 2 and rest fat 32 partition. Then you can upgrade to ext 3 in recovery.

Hi thanks for replys i have used rom manager which worked but what im wanting to know what does the ex2 and ex3 do and mean?

Right now i have partitioned my sd card when i open the apps2sd app up it says my card isnt partitioned correctly any ideas people

sbdags said:
You can partition from recovery. Note you need to back up the sd card as you will lose everything. You have to create 0 swap, 512mb ext 2 and rest fat 32 partition. Then you can upgrade to ext 3 in recovery.
Click to expand...
Click to collapse
Hi how do you do this? Iam using ClockworkMod Recovery and stock rom, been in to the partitions section but cant see anything to do with creating a partition.
Any help would be greatful

Related

HELP PLEASE - Rom Manager and partitioning Micro SD card

I hope I am now putting this in the right place but I am getting very frustrated. Decided to bite the bullet and rooted my Desire at the weekend. As I have W7 64bit, I decided to use the Tiny Core Linux method mentioned by benko286.
I installed a Modaco ROM with A2SD+ and so far so good.
Rom Manager allowed me to install the Rom from the SD card. I then used Rom Manager to partition the SD card with a 512mb Ext3 partition and a 32mb swap partition so that I could take advantage of A2SD+.
However, when I install new programs they seem to be going to the phone memory as the space on the phone memory is going down.
I copied the Rom zip file back to the Fat32 partition on the SD card and tried to install the Rom again from scratch using Rom Manager. All I get now is a big red ? and after a few seconds the phone reboots again.
What have I done wrong?
Also, if I use Acronis Disk Director to partition the card, there is an option for the Ext3 partition to be primary or logical - should this be primary and should the Linux swap partition be before of after the Ext3 partition?
All help gratefully received!
TIA
norm

[Q] How to migrate to a new SDcard with A2SD+?

I've got a new SD card and I wanna move all my data to it?
But how?
I'm running leedroid A2SD+ and with a 512 ext3 partition on my old card.
I tried to make a 1gb ext3 partition on my new card using ubuntu and moved the data there but the phone don't see the partition.
Could someone give me a step-by-step guide on how to migrate properly
Thanks
Read this, you can use Gparted instead of rom manager.

[Q] Partition issue, please help!

Hi everyone. I'm a new android user (recently got an HTC Desire) and i have an issue with the partitioning of the sd card.
First of all i apologize if i posted in the wrong section, or if this problem has been already disscused (i didnt really find anything). I am new at this so sorry for the noob question!
I have rooted the device (all the steps from a great guide here at xda) and installed the leedroid rom with app2sd. I tried using the gparted method but i think i missed a step or something cause it didnt work.
So, i tried partitioning with the ROM Manager, choosing 512mb ext partition and 32 mb of swap. After rebooting, in the storage menu it shows only 134MB of available space (63 mb available before using the rom manager).
Why is it only showing 134 mb and not 512 or more ? Did i did something wrong or should i try gparted again ?
You have to partition your sd-card again.
Download GParted here: http://gparted.sourceforge.net/
Start your Computer with it.
Put your sd-card in a card-reader, connect it to your computer and partition your sd-card so:
0 MB for SWAP!!
512 MB - 1.5 GB for ext3
Rest: FAT32
Source: http://leedroid.com/bravo-wiki/partitioning-your-sd-card-ready-for-a2sd
Sorry for the late reply and thanks for helping me. I tried again with GParted creating a 512 mb ext3 and the rest FAT32. I didnt create a swap. When i turned on the phone it said it cannot mount the SD card. I tried wiping the phone and put the ROM on the SD again. In the recovery menu when i choose install zip from SD it says something about the SD not being mounter (dont remember exactly). So i had to reformat the SD again and made the whole card FAT 32, thats the only way it let me install the ROM and mount it.
Any ideas ?
carabus1206 said:
Sorry for the late reply and thanks for helping me. I tried again with GParted creating a 512 mb ext3 and the rest FAT32. I didnt create a swap. When i turned on the phone it said it cannot mount the SD card. I tried wiping the phone and put the ROM on the SD again. In the recovery menu when i choose install zip from SD it says something about the SD not being mounter (dont remember exactly). So i had to reformat the SD again and made the whole card FAT 32, thats the only way it let me install the ROM and mount it.
Any ideas ?
Click to expand...
Click to collapse
You need to erase partitions and make FAT partition first. Make sure they're both primary, not logical partitions. You can lose the swap partition.

[Q] Partition SD

Hi guys
I have root my phone and install
clockwork mode recovery 2.5.1.8
&
LeeDroid ROM file named "LeeDrOiD_V2.5.0_A2SD_FINAL.zip"
and all of this work perfect .
then i open rom manger because i want to partition my 8GB sd
after i flash my recovery i select
partition SD (Ext size 512M) & (Swap size 32M) then it go to recovery
and i have this error "please open rom manager to report the issue"
and i re partition sd by rom manger and i have seam error
after this i let Rom Manger behind me and i go to recovery
Advance>partition SD card>2028M>32M .. .. ..
after done i open the system>Sitting>SD&phone storge
SD total space is 6GB 8-2 for partition=6
Total internal phone storage is 186M in "Disk Usage"App
but i but 2GB partition !!!
i but 4GB partition to check ... same proplime 186M
i hear some people seas install "Data2SDInstallerX1" i try it but after i install it
when i turn my phone on its hold in htc logo
now i re install Lee Droid rom and the rom is work, but partition proplime steel here
pls i need help
Hi did you try redo it with gparted? or flash better recovery to setup partitions on your sd card... some rom are not showing all space from ext partition... BTW why you have swap? instruction saying 0 MB for swap
Its working correctly, the 183Mb free space will decrease slowly but it is using the 2Gb ext partition for app storage. Also, you don't need a swap partition. My advice is to start again, either do a backup, repartition your SD card with 1Gb ext and 0 swap and then restore or just do the partitioning and flash the ROM from scratch.
raikesy said:
Its working correctly, the 183Mb free space will decrease slowly but it is using the 2Gb ext partition for app storage. Also, you don't need a swap partition. My advice is to start again, either do a backup, repartition your SD card with 1Gb ext and 0 swap and then restore or just do the partitioning and flash the ROM from scratch.
Click to expand...
Click to collapse
it need 1GB or i can but it 2GB for the partition
rmnattas said:
it need 1GB or i can but it 2GB for the partition
Click to expand...
Click to collapse
Excuse me, what?
MatDrOiD said:
Excuse me, what?
Click to expand...
Click to collapse
I think he meant : Can it be 2 GB for sd-ext partition and rest from 1st post... no clue what he is about
i have another Q
does i need to install data2ext or a2sd rom ????
First answer my question, then I answer your question.
some one tell me to partition sd card 1GB and swap 0M and i ask him can i use 2 GB or i can only but 1GB
does i need to install data2ext or a2sd rom ????
If you constantly ignore what we are telling, you won't get any answer any more.

[Q] Moving to a new sd card

hello,
first of all i would like to point out that i have searched for this topic and have tried a few solutions, but it didnt work..
here it goes..
so im switching to a new sd, and just tried to swap the cards but when i do that im either stuck in bootloop,
or if i reflash i have nothing installed on the phone (and i dont mean apps, bcs there isnt a lot of them and i dont mind reinstalling),
for example when i press settings it says it is not installed lol..
there is also nothing on the homescreens, and when the screen locks i cannot unlock it bcs there are no buttons..
Its a 16GB class 6 card with a fat 32, and ext3 (1024mb), and a ext4 (768mb), as is requred by some roms (feel free to correct me if im wrong)
The formatting was done by minitool, as i cannot go into disk drive mode to do it with gparted (with the new card inserted almost nothing works)
the old one is a 4gig with a etx3(1024mb) and works normally when i put it back, although sometimes it needs reflashing..
i have tried mirroring the old cards folder to the new one, via sd card reader, but it doesnt solve the problem...it stays the same..
any and all help is appreciated
You should do a nandroid backup of your rom, copy entire FAT32 over to the new card and then do a nandroid restore.
dusty_m said:
Its a 16GB class 6 card with a fat 32, and ext3 (1024mb), and a ext4 (768mb), as is requred by some roms (feel free to correct me if im wrong)
Click to expand...
Click to collapse
It was used by scripts which are not developed for about a year and thus obsolete. No mainstream script requires that.
Thx (hvala
will try it later on today....do i need any ext partitions?
is ext3 enough?
dusty_m said:
Thx (hvala
will try it later on today....do i need any ext partitions?
is ext3 enough?
Click to expand...
Click to collapse
It is enough, but the question remains whether it will work if you used that same dual ext partitions setup on your old 4GB card. I'm not sure, but maybe someone could clarify that. Ext partition is needed, otherwise you'll end in a bootloop - especially if some vital parts of the rom were symlinked there.
I presume you have cwm recovery installed.
If so format your card with SDformatter V 3.1. TO FAT 32 with size adjustment on.
This will format all your card to fat32,
Put the card back in phone and partition the card from within cwm recovery,
Select size of ext partition (1024kb is usually big enough) select 0 for swap.
Ext partitions are used to save on internal memory by moving apps ( (and sometimes data and dalvik cache aswell) to the ext partition and using it as if it was internal memory.
Hope this helps...
i have used only ext3 on my old card...so i guess the same would work on the new one....
so if i got this right, i can restore the old rom via nandroid...and i guess flashing something else in the future should also work...
CWM Recovery is at version 5.0.2.6 at the moment this partitions sdext with ext3 which works fine on nearly all roms. There is a 4Ext Recovery available which can convert ext3 to ext4 if required, just do a search for it if you need it, but you should be fine with ext3.
i have AmonRA
edit: am i able to to the same with it?
i remember it has the format option in the menu...
also 1024kb?
i have 1024mb lol
Yea I presume so, I use cwm!. Just follow the instructions for your rom..and create the partition if required
The restore thingy didnt help, ima still stuck at boot logo, or if i try another restore, i manage to boot, but again nothing is installed (settings and stuff)
will try the reformat and see how it goes...
why cant i just flash a brand new rom to this empty card?

Categories

Resources