Related
OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
"Locking" the keypad on my old candy bar phone made sense - if you didn't, buttons were always pressed and people were sometimes dialed from your pocket. I can also see the case for a lockscreen on the iPhone, for example, since maybe its home button can be pressed accidentally as well. However, for the EVO and for the Pre I had before it, the only way to turn on the device is via the power button up top, which is surely not going to be pressed on accident (especially with the EVO where it's only slightly raised and must be pressed deliberately). Because of this, the lockscreen serves practically no purpose, except to add an extra redundant step before using your phone. It might be more useful if it showed all recent notifications on it webOS-style, but since it only shows the most recent one, it's not very good for that either, and it isn't a big deal to pull down the shade once you're in the phone.
So, unless you actually secure your phone with a password/gesture/PIN, is there really any point to the lockscreen?
Im going to go on a guess here but the purpose of the lock screen is , in the event that the phone is in your pocket "Granted highly unlikely" the button does get pushed another process of slidding your finger down the screen to unlock would also be needed . I believe the phone sitting in a pocket or a purse or case it would be even more difficult for the sliding motion on the screen to happen . Just an extra safe guard more or less .
You can use SwitchPro Widget to disable the lockscreen if you want.
Because its part of Android and the Evo isn't the only Android phone.
...yep.
nebenezer said:
You can use SwitchPro Widget to disable the lockscreen if you want.
Click to expand...
Click to collapse
Is there an app or a way to just use the pattern lock as opposed to the slide down lock? I'd rather just have the pattern lock when unlocking rather than the swipe screen lock and then a pattern lock.
Also no lock works like a charm.
Sent from my EVO using XDA App
engagedtosmile said:
Because its part of Android and the Evo isn't the only Android phone.
...yep.
Click to expand...
Click to collapse
This is one reason. The other is simply because iPhone has it and it is Android competition, there is no denying that the development tries to outdo each other.
I do understand the OP's reasoning, with the build of HTC EVO 4G, lockscreen is not necessary. On the other hand, it is advised to lock your screen with either PIN or pattern just in case you lose your device. It is part of personal security responsibility.
ritzbrie said:
Is there an app or a way to just use the pattern lock as opposed to the slide down lock? I'd rather just have the pattern lock when unlocking rather than the swipe screen lock and then a pattern lock.
Click to expand...
Click to collapse
I'm using the latest CM6 nightly ( so i have the Vanilla lockscreen ) & if i have a pattern set, that is what i see when i press the power button, & after entering the pattern, my phone is unlocked. No need to swipe before or after.
Not sure what ROM you're using, but if it possible to use the Vanilla Lockscreen, you can probably get the same result.
Veritas06 said:
I'm using the latest CM6 nightly ( so i have the Vanilla lockscreen ) & if i have a pattern set, that is what i see when i press the power button, & after entering the pattern, my phone is unlocked. No need to swipe before or after.
Not sure what ROM you're using, but if it possible to use the Vanilla Lockscreen, you can probably get the same result.
Click to expand...
Click to collapse
Stock Sense, unrooted. If you put the pattern on you first have to unlock the screen before you can do the pattern. It is pretty retarded.
My phone's screen turns on occasionally for certain notifications and alerts, and if it isn't for the lockscreen, in the 30 seconds it takes for the screen to turn off again, i can easily butt-dial someone or do something else stupid.
ritzbrie said:
Stock Sense, unrooted. If you put the pattern on you first have to unlock the screen before you can do the pattern. It is pretty retarded.
Click to expand...
Click to collapse
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
Are their any special instructions for doing this? Im on Evo with 2.2 and I still get the swipe screen with the pattern or PIN enabled.
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
Are you sure...I don't see such a setting.
lacrossev said:
My phone's screen turns on occasionally for certain notifications and alerts, and if it isn't for the lockscreen, in the 30 seconds it takes for the screen to turn off again, i can easily butt-dial someone or do something else stupid.
Click to expand...
Click to collapse
I'm sorry, normally I wouldn't clutter up xda with an off topic post, but I actaully lol'ed at butt-dial - never heard that term before
bluehaze said:
It doesn't do this anymore with froyo, you can change the settings so it doesn't do the swipe only the unlock pattern or vice versa.
Click to expand...
Click to collapse
I too was unable to get this to work. I saw no setting to disable the slick to unlock.
you would really think it would be near impossible to butt-dial someone on the EVO, but leave it to me to prove to be the exception to the rule, I had the lock screen enabled even!!! and somehow in my pocket I called the same guy like 3 times over on the drive home one day... lucky it was a good friend of mine.
Come on, we all know why: Because the iPhone had one. If every other phone didn't have a lock screen, imagine the kind of elitist harassment we'd get from the Apple camp.
"Oh, your screen just comes on? Strange. My iPhone has a lock screen. I just swipe my finger and it unlocks, it's way cool. I can even put a lock code on it. But, no, your phone is cute. I like the little robot guy."
And so forth.
mrass26 said:
you would really think it would be near impossible to butt-dial someone on the EVO, but leave it to me to prove to be the exception to the rule, I had the lock screen enabled even!!! and somehow in my pocket I called the same guy like 3 times over on the drive home one day... lucky it was a good friend of mine.
Click to expand...
Click to collapse
wait, what the hell...? You keep your phone in your back pocket? sitting on it?
May the Evo gods have pity on your soul... don't you know it gets its own front pocket, no keys, no coins, no lint, no nothing!
ScrapMaker said:
wait, what the hell...? You keep your phone in your back pocket? sitting on it?
May the Evo gods have pity on your soul... don't you know it gets its own front pocket, no keys, no coins, no lint, no nothing!
Click to expand...
Click to collapse
Lol...I dedicated a pocket too. Nothing is allowed in my right front pocket but my phone. I have to force myself because with my g1 I had gotten to the point where I didn't care.
ccicchitelli said:
I too was unable to get this to work. I saw no setting to disable the slick to unlock.
Click to expand...
Click to collapse
It may be different depending on which ROM you're running, but I was able to get the pattern unlock without the slide unlock with CM6 RC1 using this method:
- Settings
- Location and Security
- Set up screen lock
- Pattern (add pattern here)
Does anyone know how to disable the vanilla slide to unlock screen but keep something like the pattern lock on??? I've tried no lock from the market, but my pattern lock wouldn't come on. It's kind of retarted to have to slide to unlock the screen and enter a pattern lock. Thanks for any help.
btw, I'm running Calkulin's v.1.1 ROM.
Thought I'd try one more time to get it to the top? Anyone? Thanks.
-Slevin
Sent from my Sprint EVO using XDA App
NVETHIS said:
Thought I'd try one more time to get it to the top? Anyone? Thanks.
-Slevin
Sent from my Sprint EVO using XDA App
Click to expand...
Click to collapse
Doesn't he have the zip file on the 1st page of his thread?
What thread are you talking about? I,m a search dummy, I can't find anything about this stupid lock. Are you referring to Calkulins thread?
Sent from my EVO using XDA App
I got the zip, flashed it and how I have the older slide left/right lock, still I have to do that before I get my pattern. Ugh this is a pita lol. I just want the single pattern lock when I turn my screen off.
Sent from my EVO using XDA App
on CM6
the PIN and PWD option presents the user with the SlideLock...then the SecurityLock then the desktop.
the ZigZag option presents the user with the PatternLock then desktop.
I'm not running CM6....are those settings found in that rom? Is there no other way to just get the patter lock and no vanilla lock???
-Slevin
I know you can use switchpro to disable the lock screen but I've never tried it in conjunction with the pattern lock so I don't know of it would do what you're looking for but it's worth a shot.
I use switchpro, I'll give it a go and post back.
*edit- Yep! It does exactly what you're looking for So use switchpro to disable the lock screen and when you hit the power button to wake the phone up it goes directly to the pattern lock
nebenezer said:
I know you can use switchpro to disable the lock screen but I've never tried it in conjunction with the pattern lock so I don't know of it would do what you're looking for but it's worth a shot.
I use switchpro, I'll give it a go and post back.
*edit- Yep! It does exactly what you're looking for So use switchpro to disable the lock screen and when you hit the power button to wake the phone up it goes directly to the pattern lock
Click to expand...
Click to collapse
Is your lock screen the Sprint slide-down lock or the standard/vanilla lock? I ask because, with Switch Pro, it either unlocks both, or enables both (with the Sprint HTC slide-down lock).
Thanks.
didn't worked on Xperia x10 =(
Just wanted to add that disabling the lock screen with switch pro is awesome. I can't believe I never found that before.
Also, if you want to have ur volume buttons wake ur phone, try widget locker. Enable widget locker, then enable any hardware button wake, then use switch pro to disable screen lock then disable widget locker. Bam, volume key wake w/o lock screen, pure awesomeness.
Hey... I think this thing makes phone calls too!
This question has definitely been asked before but I haven't found any real solutions to the problem. How can I disable the swipe/drag to unlock feature without disabling the lock screen?
I've already tried NoLock and other 3rd party apps and while they have worked, they all usually disable the lock screen along with the swipe to unlock button.
I've found that when it comes to the Android OS, there is more than one way to do something. Since I have root, is there any file that can be edited to disable the swipe to unlock screen without disabling the pin code/pattern lock?
This has been bothering me for quite a while. I'm really hoping there is some file on the OS that I can edit and disable the swipe to unlock feature.
So, anyone know how?
How the hell are you supposed unlock the screen?? That's my question if your getting rid of the slider/tab what's going to unlock it? I'm lost your question makes no sense...
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Enabling pin or pattern lock is suppose to disable the stock lockscreen.
Sent from my SPH-D700 using Tapatalk
Big Goron said:
How the hell are you supposed unlock the screen?? That's my question if your getting rid of the slider/tab what's going to unlock it? I'm lost your question makes no sense...
http://i1202.photobucket.com/albums/bb374/TexasEpic/Biggoron3.png
Sent From My Cyan Samurai
Click to expand...
Click to collapse
What this person is asking is if there is a way to disable the screen with the time/date that says "Swipe screen to unlock". If you have a security lock screen with pin, pattern, etc or an application like "Go Locker," you still have the annoying "Swipe screen to unlock" that displays first. You have to swipe it on that screen, and then you are on the next Lock Screen to enter your pin, pattern, etc. It is two layers of protection. Many people are finding the "Swipe screen to unlock" annoying when they have a security screen that is also configured.
I can set a lockscreen pin but it will never lock? any idea why and i was wondering if they got rid of the apple side bar tool on this rom.
After setting the PIN, did you choose the option to lock immediately or wait 5 seconds?
audit13 said:
After setting the PIN, did you choose the option to lock immediately or wait 5 seconds?
Click to expand...
Click to collapse
i dont no why i post anything. i already figured it out. it was something to do with the shake options i just disabled it. but now i cant use my slide unlocker to unlock or slide to use phone.
If you set a PIN or set a pattern to unlock the phone, I don't think you can use the slider to unlock the phone.
audit13 said:
If you set a PIN or set a pattern to unlock the phone, I don't think you can use the slider to unlock the phone.
Click to expand...
Click to collapse
i figured haha, thanks man for your help