Related
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
I think this error becuz u r trying to run wm6 applications under wm5
vodovodo said:
I think this error becuz u r trying to run wm6 applications under wm5
Click to expand...
Click to collapse
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
Any other solutions, please?!
Thanks in advance.
Problem may be cause of your SD card if u r using WM6. SD card PowerManagment value is set("DisablePowerManagment") to 0 in your registry. This means after a while your device will set your SD card power off for savg batttery. This cause to unread your program files etc while u start any program on your form your SD card device.
I fixed this problem like that;
By any registry editor:
Find the Path:
"Hkey_local_machine>drivers>sdcard>clientdrivers> class >SDMemory_Class"
after that find;
""DisablePowerManagement"" key and set its value to "1" than save and exit. Than soft reset your device. Problem will be fixed.
Sorry for my bad english.
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC. http://ceregeditor.mdsoft.pl/
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
I have a HTC Tytn II and i get the same error. However, When trying to alter data using the reg editor you recommended, i found the 0000101a was already set to 1. Any other ideas?
Hi All,
Would someone be so kind to me a explain how I can move a package from the EXT directory or one Kitchen to the EXT directory on this version of kitchen.
I thought I could just simply copy the directory? So I had a go compiling a version of youtube from a different kitchen It would seem mot to work thou as I get the dreaded The file 'xx' cannot be opened. Ether it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
Any ideas how to get this to work?
Or look for the tool MsSigner, it can be found in most kitchens.
You'll be able to sign it with a signature that is accepted after you aply the enablyRapi and SPCCerts policies.
You're probably missing a key dependency package like dshow (mshow?) or concurrence manager. Also, make sure the shortcut path is valid. Lord knows why, but that's the message you get for bad shortcuts.
josephwsl said:
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
Click to expand...
Click to collapse
maybe .NET CF is missing or not up-to-date?
RAMMANN said:
maybe .NET CF is missing or not up-to-date?
Click to expand...
Click to collapse
ahh i love you bro, u saved me an hassle i tried everything and it was the net.cf
damii said:
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
When I try that, I'm told I don't have the authority to access that. :-(
now what?
Yeah, me too!!!
All of a sudden too. Everything was fine then I got these certificate errors every time I try to run Haret.exe to run android. This happened last night. Did my provider change something on me?
I try to change that registry key and it won't let me.
Re:this post
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
You need hard reset!
Same problem "certificate errors" and a hard reset wont work
Plz help
damii said:
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC.
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
Thanks! That really helped me. You literally saved me a good night sleep. I was already desperate.
Wow, it works Thank you!!!
Awesome!!!
This worked perfectly. Thanks so much for the help. I've been racking my brain about this for over an hour now, then found this through a search.
Thanks!
OMG
I have the same problem and I tried :
1/ Hard Reset
2/ Rom Update
3/ installed NetCFv3.5
4/ editing values in the registry
what els ????!
plzz i need your help
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
its in one of your phone/device settings to let u download and install apps or cabs not digitally signed. thats all, i believe. just find it and check it off. or look for advanced config cab if u can find it and install that. it has an option in there also to let u download/install whatever..
mullethunter said:
Hi. I just recently purchased an HTC Touch Pro2 from T-Mobile running WinMo 6.5. That being said, I have not been able to open any cab files on the device to install some software. Basically I'll transfer the cab to the device and attempt to open it. I get one of three messages depending on the app I guess. the most basic is "Installation was unsuccessful" to "Installation was unsuccessful. The program or setting...not digitally signed...trusted certificate" (this was from MobileFTPClient). Installing Opera Mini 5 gives a simple: "Installation of mini5wm.cab was unsuccessful".
Ok, so being a software developer for 10 years I've been looking into some registry values and can't seem to find what I need to get anything to install. If I download from the Windows Marketplace that's all good, but nothing else.
What do I need to do to be able to install cab flils directly? Honestly if I can't get this to work this phone is going back. I moved from an iPhone to this phone specifically so I can install apps and monkey around with the device, but so far I'm done before I started.
Thanks for any info you can give me.
Click to expand...
Click to collapse
The cab I have attached may help you...it's some SDK certificates that will allow installation of certain unsigned apps, but I don't know if this is what the ones you're running are requiring and missing. It won't harm anything to try this one, and you can easily uninstall it if it doesn't do the trick
Thanks guys. Sirphunkee - that cab actually installed, but I'm having the same problem. Another forum has suggested that I take the device back to T-Mobile, but it just seems like there's a setting that's not right in the OS. Demandarin - I've looked for various security permissions in the UI with no luck. I've mucked around with some Policy values in the registry per some threads on this forum, but still nothing.
I'll keep trying, and thanks.
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
mullethunter said:
So...weird; Opera Mini and Weather Bug (well known apps) wouldn't install, but an SMS notification disable cab installed (from the xda site) as did Evernote (evernote.com). I have no clue what the deal is, but it's getting beyond stupid that I can't install just any cab file.
Click to expand...
Click to collapse
Have you already installed .Net 3.5? It's a framework that many other programs use (and need) to install, and it's not on the TP2 by default...it's the only other think I could think of that would keep you from installing stuff. Cab is attached, if you don't have it already.
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
mullethunter said:
Got it. I installed the Device Security Manager PowerToy and was able to change the configuration there. Opera Mini 5 just installed.
Never would have thought the phone would come that locked down, but so far so good. Thanks for all of the ideas.
Click to expand...
Click to collapse
Well yeah what's weird is that I never had to use that to get any of those apps installed
On CodePlex I have published my app for tracking working time.
It is based on the SenseUI SDK.
SenseTimeTracker
For furter feature development either this thread can be used or the discussions in CodePlex.
After getting some feedback according to installation problems, I figured out, that the deployed .cab file does not contain the SQL Server Compact 3.5.
This has to be installed manually until I do not provide a msi-setup.
Explanation on how to install the .NET Compact Framwork 3.5 and/or the SQL Server Compact 3.5 has been added on the CodePlex page.
Version history:
Version 1.3
* Length checking of input fields
* Bug fixed with reports when first time card has date in january
* Issue with localization fixed
* Category edit form localized
* Creating new category did throw an excexption
* Default category is hidden in category list
Version 1.2
* cab file now creates a shortcut
* new version detection added
Version 1.1
* Initial release after UI redesign
Installation Procedure
Hi, Could you explain the Installation procedure, other than download and install is there any other additional requirement to get this program up and running?
Thanks
Download the cab file, copy to your mobile device and run it from there.
This shall install SenseTimeTracker on you mobile device.
Let me know if it doesn't, since it is my first publishing. I only installed it on my device or the emulator.
Test
OK! I downloaded you app, installed and found the following problem, btw I am on a Blackstone using G10 Dusk Ultimate 2 v 8.31
1) There is no icon present for your apps in the programs menu.
I went to programs found the your app and try starting it from there, I got the following error
Ok, SQL server was not deployed. I will try to fix this and provide an update.
On my devices there has been SQLCE installed, so I didn't recognize it.
Thanks for the hint.
wesch00 said:
Ok, SQL server was not deployed. I will try to fix this and provide an update.
On my devices there has been SQLCE installed, so I didn't recognize it.
Thanks for the hint.
Click to expand...
Click to collapse
No problem was glad to help, I was looking for a program like that for sometime now , I will test again when you update
You have to install the SQL Server Compact manually, sorry.
See my explanation in CodePlex.
zjxpot said:
OK! I downloaded you app, installed and found the following problem, btw I am on a Blackstone using G10 Dusk Ultimate 2 v 8.31
1) There is no icon present for your apps in the programs menu.
I went to programs found the your app and try starting it from there, I got the following error
Click to expand...
Click to collapse
wesch00 said:
You have to install the SQL Server Compact manually, sorry.
See my explanation in CodePlex.
Click to expand...
Click to collapse
Hi I downloaded and follow your instructions regarding the installation process and got the top half of the error I posted above when I tried starting the apps also no icon was installed in programs menu I tried it on G10 Ultimate 2 v8.40 release today
The icon issue I couldn't check yesterday, will do that asap. Did a lot of research how to deploy SQL Server Compact.
But could you run the app?
wesch00 said:
The icon issue I couldn't check yesterday, will do that asap. Did a lot of research how to deploy SQL Server Compact.
But could you run the app?
Click to expand...
Click to collapse
No, its not running, when I try runnunig it I get the same error box but only the top half of the message the bottom half is gone.
That makes no sense since allways an explanation of the exception is displayed.
If you installed the SQL Server Compact, can you try to delete the whole SenseTimeTracker folder in the program as well as in the documents directory (if there is one) and reinstall the cab again.
I checked this yesterday on a clean emulator and it worked. So without any further hints I cannot guess the problem.
Are you familar with developing smart device aps. Then I can send you the project for visual studio and you can try to deploy it from within VS. That shall work. Let me know.
I suggest to contact me via pm, I will help you to fix your problem.
wesch00 said:
That makes no sense since allways an explanation of the exception is displayed.
If you installed the SQL Server Compact, can you try to delete the whole SenseTimeTracker folder in the program as well as in the documents directory (if there is one) and reinstall the cab again.
I checked this yesterday on a clean emulator and it worked. So without any further hints I cannot guess the problem.
Are you familar with developing smart device aps. Then I can send you the project for visual studio and you can try to deploy it from within VS. That shall work. Let me know.
I suggest to contact me via pm, I will help you to fix your problem.
Click to expand...
Click to collapse
Hi, I flashed an orginal HD rom, installed net, sql and then your apps went to programs and started timetracker and it worked, I reflashed a cooked rom did the installation and it also worked I tried entering some information I got some error that require me to restart timetracker one of the error is attached, I will flash G10 rom again as this is my rom of choice and I will let you know how that went
I must say thanks for what I have seen so far if I get it working on G10 rom I will do some more in dept testing.
Thanks again for sharing
Ok, I see, it has nothing to do with your ROM.
I think there is a bug with the categories which only occurs on an empty/fresh database. On my tests I've had everytome a filled one, since I implemented category support later on.
I had some minutes to try it on a fresh installtion. Unfortunatly I cannot reproduce this bug. Can you plz provide more info, what in which order you entered for getting this error. I first created a user which is mandatory. Then created a client, then a project for that client and then a task for that project. Now entering a timecard did work, since the default category ("unknown") was used. The error you've got is a key violation between task and category. This should not occour, but I need to know in what order you entered the data.
wesch00 said:
Ok, I see, it has nothing to do with your ROM.
I think there is a bug with the categories which only occurs on an empty/fresh database. On my tests I've had everytome a filled one, since I implemented category support later on.
I had some minutes to try it on a fresh installtion. Unfortunatly I cannot reproduce this bug. Can you plz provide more info, what in which order you entered for getting this error. I first created a user which is mandatory. Then created a client, then a project for that client and then a task for that project. Now entering a timecard did work, since the default category ("unknown") was used. The error you've got is a key violation between task and category. This should not occour, but I need to know in what order you entered the data.
Click to expand...
Click to collapse
Sorry for not replying sooner, I was trying some other roms but no luck getting this app to work on those other roms that I flash, for me its only working on stock and Energy GTX I am presently downloading a 6.5 rom to test all others has been 6.5.x.
I have been able to reproduce the error again and again, try this
Go to category select new and create a new category everything should be ok, create another one and it should crash, also I am unable to edit the category "unknown"
More Crashes
Hi, I did some more test and I got more errors I have attach one picture, let me try to explain
1) If I try to copy the TimCard it crashes
2) TaskName is to long it crahes
I got a couple more crashes but I forgot where in the apps they occour however it seems that is not handling user input error well maybe a dialog box should appear and tell the user that the TaskName is to long or something like that I also think you should try and test if all but most of the option like copy, remove, edit, maybe it my rom related but you could still check just to be sure.
Thx again for the responses.
Couls get it allready run with the other ROMs? I have no opinion about these ROMs. I do not use any special functiuons, it is only .Net-code. The only explanation I have would be that there are problems with drawing. Bit this is done by the SenseUI framework which I cannot modify or debug.
Now to the issues.
The Category issue I could allready fix for me, will update it soon. Dont use categores for the mean while, use only "Unknow". You can change it later when it works. The "Unknow" category should not be editable, I will hide it in the next release.
The issue with the task names beeing too long is a bit more difficult to fix, I'll try to find a solution (need a common one since this will be happen with all inputs).
For the issue with copying a time card, I need a screendum of the error. I use copying of time cards allmost every day and never had problems. So it should be some special in your entries. If I have the error output, I hope to have an idea.
wesch00 said:
Thx again for the responses.
Couls get it allready run with the other ROMs? I have no opinion about these ROMs. I do not use any special functiuons, it is only .Net-code. The only explanation I have would be that there are problems with drawing. Bit this is done by the SenseUI framework which I cannot modify or debug.
Now to the issues.
The Category issue I could allready fix for me, will update it soon. Dont use categores for the mean while, use only "Unknow". You can change it later when it works. The "Unknow" category should not be editable, I will hide it in the next release.
The issue with the task names beeing too long is a bit more difficult to fix, I'll try to find a solution (need a common one since this will be happen with all inputs).
For the issue with copying a time card, I need a screendum of the error. I use copying of time cards allmost every day and never had problems. So it should be some special in your entries. If I have the error output, I hope to have an idea.
Click to expand...
Click to collapse
Hi, I have flashed back to my rom of choice as I need it for work, I also used an apps name Pocket Time, I was hoping to get your working as your is mor mordern and has more options, anyway I will be able to test your program again this weekend and I its working for me I will change my rom and start using your apps I like it.
I have attach the detail section or the Task Name error for you to look at also I have attach the error and the error detail section of G10 rom maybe from those pictures you can figrue why it dosent start
The last five is from G10
Thanks
Thx for the dumps.
As I allready wrote, the problem with the length of the description is a common problem. I did know, that it wasn't checked. I will release a new version today (1.3) which supports those checks.
The other problem has something to do with the serialisation/deserialisation of the user settings. These are stored in an XML-file in the application directory. And it seems, that the existing date time format has problems.
Is the language of your G10 ROM a different than the default ROM? I assume, you have created the XML the first time with on ROM and now trying to read it with another on. And the DateTime format of both are different and cannot be parsed.
Try to delete the xml-file in the app directory and start the app again with the G10 ROM. Let me know, if this solved the problem. May be I can then find a solution therefor. If you delete the xml-File, you will be asked for selecting a user. Select you previous eneterd user. If you navigate away from the user panel, you will be asked for the password you entered previously.
If you not allready entered sensitive data, you can send my the database (sdf-file) and the xml-file. Then I can try to debug it. I've had a lokk into the xml-file and saw there are only two time fields where the time is entered as 8:00:00 and 17:00:00. If this format is not valid on your ROM due to another culture, then this may cause the error you posted. What is the usual time format on your country?
Then I have a question according this ROM. The error occurs in Deserialize while reading a DateTime value. I have a try-parse in the deserializing section. So no exception should be thrown by the app. If there is an error in the XML file, defaults are used. I did try this on my device and ti worked that way. So I really do not know, why the exception is thrown. Ist there any special in your ROM handling exceptions?
wesch00 said:
Thx for the dumps.
As I allready wrote, the problem with the length of the description is a common problem. I did know, that it wasn't checked. I will release a new version today (1.3) which supports those checks.
The other problem has something to do with the serialisation/deserialisation of the user settings. These are stored in an XML-file in the application directory. And it seems, that the existing date time format has problems.
Is the language of your G10 ROM a different than the default ROM? I assume, you have created the XML the first time with on ROM and now trying to read it with another on. And the DateTime format of both are different and cannot be parsed.
Try to delete the xml-file in the app directory and start the app again with the G10 ROM. Let me know, if this solved the problem. May be I can then find a solution therefor. If you delete the xml-File, you will be asked for selecting a user. Select you previous eneterd user. If you navigate away from the user panel, you will be asked for the password you entered previously.
If you not allready entered sensitive data, you can send my the database (sdf-file) and the xml-file. Then I can try to debug it. I've had a lokk into the xml-file and saw there are only two time fields where the time is entered as 8:00:00 and 17:00:00. If this format is not valid on your ROM due to another culture, then this may cause the error you posted. What is the usual time format on your country?
Then I have a question according this ROM. The error occurs in Deserialize while reading a DateTime value. I have a try-parse in the deserializing section. So no exception should be thrown by the app. If there is an error in the XML file, defaults are used. I did try this on my device and ti worked that way. So I really do not know, why the exception is thrown. Ist there any special in your ROM handling exceptions?
Click to expand...
Click to collapse
Hi, I am using the original G10 WWE Ultimate 2 v8.31 rom out of the box in fact all the ROM I have tried this app on has been out of the box, will try flashing and trying your app again this weekend.
Are you using your app on an original stock rom or a cooked rom?
I'm using the app on the updated but original HTC ROM. But it did also work on the nonupdated.
The description of you exception shows me, that the problem has something to do with the localized date time format. What localizaion do you use. And I think you've got it allready running with another ROM. What localization do you have there?
What I totally do not understand, in my opinion there should not be thrown an exception, since serialization is done within a try/catch block. If there is an deserialization error, it should be catched and defaults should be used, which I have testet.
Hello,
I'm trying to develop a little app for my Win6.5Pro PDA (brand new, entreprise edition).
So I've made my own certificate (using tools from the SDK) and it runs smoothly on the emulator.
But when I want to transfer it to my PDA, it says: The file X cannot be opened. Either it is not signed with a trusted certificate, or one of its components.....
I installed the certificate on my PDA, but nothing changed.
I tried with a .cab instead of an .exe, but nothing changed.
I tried to run the .exe in another WinMo, and it run smoothly.
I tried to install other apps, but nothing except the Marketplace's apps were allowed.
After a few hours on Google and MSDN, I think it is because the security level is set to "Locked" (cf. http://msdn.microsoft.com/en-us/library/bb416350.aspx ).
Is there a way to change the security level, or to bypass it?
(it's for personnal dev, and I'm not part of Mobile2Market Program so I don't have a trusted certificate)
Not sure if WM5 version will work with WM6.5, but there's a tool for this:
http://www.microsoft.com/downloads/...8C-D587-47E0-908B-09FEE6EA517A&displaylang=en
Here's a short tutorial:
http://www.riverpast.com/en/support/tutorials/view/?id=4
Thanks stepw.
The Security Configuration Manager tool is also include in the WinMo 6 SDK, so it should work fine.
But I've already tried, and the phone can't connect to anything but ActiveSync
So, after a cople of hours, I've somehow managed to find a solution.
I don't know if it will help somebody but I will write it here.
It's probably not the best solution, but it work fine with me.
First, I've copied the following configuration file into the PDA:
C:\Program Files\Windows Mobile 6 SDK\Tools\PocketPC\Security\SecurityOff.cpf
C:\Program Files\Windows Mobile 6 SDK\Tools\PocketPC\Security\RapiSecurityRapiAllowed.cpf
And I've executed them several times: it seems that something happened (the screen got black for half a second) but at this stage I still wasn't able to launch my app.
I've try to hard reset the device and still nothing changed.
But when I deleted the ActiveSync connection on my desktop and re-connected the PDA, a pop-up appeared saying that the device should restart so new changes will take effect.
And when the PDA restarted, everything was fine
Hi hackers,
Version 2.1 of DeployProvXML is here, and should be more robust than the previous version:
1: The CustClear.provxml file is now copied both using the filesystem DLL (like v1) and using XML provisioning (hopefully works aroudn the HTC update blocking filesystem access.
2: The CustClear.provxml file is now self-chaining. Really, this time - so long as you run the program *once*, you can even change the included CustClear.provxml, re-deploy, and run Connection Setup; your new version will then be copied to \Windows. (Re-run CS to actually process your new version). No more need to re-run DeployProvXML after each use of Connection Setup!
3. The program now contains more diagnostics. It sets a registry value at launch (using ComRegRW.DLL), changes that registry value (using provxml) when deploying the file, and changes it again when the deployed file is processed by Connection Setup (as part of the CustClear.provxml). It also checks that the value is as expected avter deploying.
REQUEST:
Anybody who has an interop-unlocked HTC phone with the latest official HTC update (meaning you can't use TouchXplorer anymore), please run this app, then run Connection Setup, then use a registry editor to check the key HKCU\Software\DeployProvXML. It should have a value, LastOperation. Please include the data in the value (or the fact that it doesn't exist) with your reports. Thank you!
Description:
Another handy little utility for people with HTC phones, this app simply copies a CustClear.provxml file from its install directory to \Windows, then exits. The idea is to make sure that you're never without at least a basic file that can be used by Connection Setup to unlock your phone. New in v2, every time you run Connection Setup, the file will automatically restore itself to the Windows directory. This ensures you'll never accidentally get caught with a locked phone after an upgrade or something!
The included Provxml has three parts. However, you can customize it however you like by opening the XAP file and editing the embedded provxml. The parts are:
1: Applies the registry settings to unlock the phone, including Interop-Unlock.
2: Applies a test value in the registry, at HKCU\Software\DeployProvXML. This value is harmless but can be used to test if the app is working.
3: Chain-copies itself from DeployProvXML's install folder into Windows again, replacing the copy that Connection Setup consumes.
Note that this program does not actaully apply the provxml, merely copies it to where Connection Setup expects to find it. It should close immediately after starting; this is not a bug. If you see a dialog box instead, something went wrong and you should report it below!
This program is only going to work on HTC phones, since it uses the HTC DLLs for provxml, file access, and registry. It is a 7.0 app but is compatible with Mango if you have Interop Unlock already.
XAP is in DeployProvxml\bin\debug. Source included for those interested.
Do you think a deployer for OMNIA 7 is possible ?
Maybe with a .dll of WP7 Root Tools ?
So users who didn´t prepare their device for our OnDevice provxml app under NoDo could also enable this feature...
contable said:
Do you think a deployer for OMNIA 7 is possible ?
Maybe with a .dll of WP7 Root Tools ?
So users who didn´t prepare their device for our OnDevice provxml app under NoDo could also enable this feature...
Click to expand...
Click to collapse
This has been solved I can finally test the app myself now. I changed the path to copy the provxml from the iso storage of the app instead of the provxml folder.
Interop.Services
Just read this http://translate.google.com/transla...oducing-windows-phone-7-5-native-programming/
Any joy?
Looks cool, but I'll need to investigate further. It has definitley been reproted that Homebrew apps without ID_CAP_INTEROPSERVICES don't work even in Mango. It sounds like this guy is maybe using a marketplace signed DLL, though? Not sure - the translation isn't great. He's working from an app that I've never explored, and that appears to be specific to the Japanese Mango phone.
how do we use it. will it permanently unlock when we update to official Mango?
Ttblondey said:
how do we use it. will it permanently unlock when we update to official Mango?
Click to expand...
Click to collapse
Install app in NoDo.
Run in once.
Upgrade to Mango.
Run the Connection Setup app (from Marketplace).
Hit "OK" in Connection Setup.
Your phone is now dev-unlocked and will not automatically relock. Additionally, you can now install Mango homebrew.
I suggest you then run DeployProXml again, since installing an update, even something like a HTC firmware update, may re-lock the phone. So long as you've run DeployProvXml since the last time you ran Connection Setup, though, you can unlock again.
If this helps, please hit Thanks!
piaqt said:
Just read this http://translate.google.com/transla...oducing-windows-phone-7-5-native-programming/
Any joy?
Click to expand...
Click to collapse
he does pretty much the same from what I read. You just use oem dll's and have some native functions to work with. f/e htc has file operations + regoperations + provxml, samsung has regoperations + provxml (trough which you can do regops). This manufacturer dll probably contains fileops as well, which is nice since there might also be a chance that there will be a working provxml method and with the fileops you can copy the provxml files to the desired location. In theory ofcourse.
Marvin_S said:
he does pretty much the same from what I read. You just use oem dll's and have some native functions to work with. f/e htc has file operations + regoperations + provxml, samsung has regoperations + provxml (trough which you can do regops). This manufacturer dll probably contains fileops as well, which is nice since there might also be a chance that there will be a working provxml method and with the fileops you can copy the provxml files to the desired location. In theory ofcourse.
Click to expand...
Click to collapse
There are two differences that are worth noting, though.
A) This is a phone that came with Mango. There was never any chance to unlock it for Mango homebrew. It blocks apps with ID_CAP_INTEROPSERVICES - something we had to work around with registry edits.
B) Related to A, he can call native code without having ID_CAP_INTEROPSERVICES. This isn't supposed to be possible at all. Makes me wonder if he's actually calling anything in the DLL or if he's just loading the COM object but not using it and calling that success.
GoodDayToDie said:
There are two differences that are worth noting, though.
A) This is a phone that came with Mango. There was never any chance to unlock it for Mango homebrew. It blocks apps with ID_CAP_INTEROPSERVICES - something we had to work around with registry edits.
B) Related to A, he can call native code without having ID_CAP_INTEROPSERVICES. This isn't supposed to be possible at all. Makes me wonder if he's actually calling anything in the DLL or if he's just loading the COM object but not using it and calling that success.
Click to expand...
Click to collapse
Ahh yeah your right. Yeah I realy wonder what the trick behind it is and if he manages to install it.
Something else I have not tried yet, but what happens if you deploy it without the id_cap and than run it. It will not work obviously, but what happens if you redeploy with the tag in? Will it still get rejected? Because the phone rejects the app I think.
Hey, the ZIP contains a folder, which, if I package into a XAP, fails on deployment. What's the best way to get this packaged into a usable XAP?
trying to figure out how to install this app.
@thesecondsfade:
Bottom line of the first post:
"XAP is in DeployProvxml\bin\debug. Source included for those interested."
I distribute most of my apps this way, unless the source is really big and the XAP alone is a significantly smaller download for some reason.
@Ttblondey:
Is your phone dev-unlocked?
Is your phone either pre-Mango, or interop-unlocked?
Do you have a XAP deployment program and the Zune software?
GoodDayToDie said:
@thesecondsfade:
Bottom line of the first post:
"XAP is in DeployProvxml\bin\debug. Source included for those interested."
I distribute most of my apps this way, unless the source is really big and the XAP alone is a significantly smaller download for some reason.
@Ttblondey:
Is your phone dev-unlocked?
Is your phone either pre-Mango, or interop-unlocked?
Do you have a XAP deployment program and the Zune software?
Click to expand...
Click to collapse
My TouchXplorer does not work anymore after updating to the official Mango, though my phone is still unlocked. This XAP will definitely helps if new firmware/updates come along to deploy Provxml to /windows.
I've installed it but how can I verify if this is being installed/copied to /windows?
GoingInside said:
My TouchXplorer does not work anymore after updating to the official Mango, though my phone is still unlocked. This XAP will definitely helps if new firmware/updates come along to deploy Provxml to /windows.
I've installed it but how can I verify if this is being installed/copied to /windows?
Click to expand...
Click to collapse
This app uses the same DLL as TouchXplorer, which means it doesn't work either (I wrote a number of apps using that DLL, including a backup tool, and none of them can see any files anymore). I'm not sure exactly what was changed, but yeah, they broke it. My hope is that Heathcliff74's WP7 Root Tools will restore file browsing on HTC soon.
As soon as I finish restoring my phone, I'll try writing a version of the app that uses ProvXML to copy the file, instead of ComFileRW.dll (which no longer works if you get the final HTC update). Using ProvXML is limited in some ways - you can't browse the filesystem, for example - but it works great for this type of operation.
i'm on force unlock from Ansar's thread with Pedbe way final mango.Been trying to use advancedconfig 1.3,1.4 battery meter it don't work anymore.Good thing I can sideload(that's important)
GoodDayToDie said:
This app uses the same DLL as TouchXplorer, which means it doesn't work either (I wrote a number of apps using that DLL, including a backup tool, and none of them can see any files anymore). I'm not sure exactly what was changed, but yeah, they broke it. My hope is that Heathcliff74's WP7 Root Tools will restore file browsing on HTC soon.
As soon as I finish restoring my phone, I'll try writing a version of the app that uses ProvXML to copy the file, instead of ComFileRW.dll (which no longer works if you get the final HTC update). Using ProvXML is limited in some ways - you can't browse the filesystem, for example - but it works great for this type of operation.
Click to expand...
Click to collapse
Ok, guess I'll have to wait for the experts (Heathcliff74 and you etc) to solve this HTC drive update issue. Thank you!
GoingInside said:
Ok, guess I'll have to wait for the experts (Heathcliff74 and you etc) to solve this HTC drive update issue. Thank you!
Click to expand...
Click to collapse
@GoingInside, and anybody else in the same boat (latest HTC update installed, filesystem browsing broken), please try the latest version (v2, now on the initial post)! After running the app once, run Connection Setup and hit OK. After you do that, use a Registry Editor to check for the presence of the following registry key: HKCU\Software\DeployProvXML.
Please report whether that key is present. If it is, that means the app is fully functional even with the latest update!
I only have a NoDo Backup (my phone came with nodo) - can I get the interop unlock trough dev unlocking the phone and then running our app?
nvm, I am now downgrading to NoDo and Will then update to the HTC RTM (the one that Comes via zune). As soon as I am there I will tell you if i had luck with it or not (I hope I can interopunlock on NoDo as the 3 apps sideloadlimit is crap)
Update 1: I am on NoDo and I started your app. It cloesd, i went to Connection Setup and ran it. Will check if the registry value is there as soon as some XAPs are deployed (first time that I can deploy more than 3 XAPs )
Update 2: Now going trough the Beta - RTM - HTC Update Update marathon. Will Report back as soon as I am on HTC's RTM
GoodDayToDie said:
@GoingInside, and anybody else in the same boat (latest HTC update installed, filesystem browsing broken), please try the latest version (v2, now on the initial post)! After running the app once, run Connection Setup and hit OK. After you do that, use a Registry Editor to check for the presence of the following registry key: HKCU\Software\DeployProvXML.
Please report whether that key is present. If it is, that means the app is fully functional even with the latest update!
Click to expand...
Click to collapse
Unfortunately, it seems that the new XAP (v2) doesn't work as well. Copy and deploy the latest DeployProvXML.xap (dated 5/10/2011) to my HTC trophy. After running Connection Setup, I can't find the registry key: HKCU\Software\DeployProvXML. I only found MICROSOFT under HKCU/Software/.
But please continue your research into this. THANKS!