Team,
This One-Click Root process will copy over the rooted-update.zip or unroot-update.zip file then reboot your phone. Follow the instructions in the CMD prompt that launches.
Rooting adds the following to your 2.1 Eclair system and unrooting removes them:
/system/xbin/busybox (version 1.17.1)
/system/xbin/su
/system/app/Superuser.apk (version 2.3.1)
and links /system/bin/su to /system/xbin/su
Credits:
LeshaK at Samdroid: for the original rooted-update.zip.
Dr.Hani Akrim for the original rooted-update.zip for 2.2 Froyo.
gunnarhafdal : for creating the Mac GUI for my app.
This has been tested on stock Android 2.1 Eclair and 2.2 Froyo JP2 not JP3.
PC Instructions:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download the app here , mirror.
Warning: I am not responsible for bricked phones, rooting can void your warranty....
Requirements: Dot Net Framework version 4: Click Here
Rooting Instructions:
1. Make sure your phone is on USB Debug mode: (MENU > Settings > Applications > Developement > USB debugging = Checked )
2. For Windows x86 and x64 systems make sure that the Samsung Drivers are installed. You can get them here.
3. Extract the contents of GalaxyS_I9000_One-Click_Root.rar to a folder.
4. Connect your phone to your PC via the USB cable and launch the file "Galaxy S I9000 One-Click Root" file.
5. Based on the version of the Operating System you are running, click the "One-Click Root 2.1" button for Eclair or "One-Click Root 2.2" for Froyo Warning: Not Both!!. This will launch a command prompt follow the instructions in the CMD window.
Done! You are rooted.
Mac Instructions:
Download the app: here, mirror.
It requires Mac OS X 10.5 or higher.
Rooting Instructions:
1. Make sure your phone is on USB Debug mode: (MENU > Settings > Applications > Developement > USB debugging = Checked )
2. Connect the phone to your computer.
3. Eject both the internal and external SD card from your computer and turn off USB storage in the notification area.
4. Click one of the buttons depending on what you want to do.
5. After the phone has rebooted into recovery select "apply sdcard:update.zip" for I9000 and I9000M and choose "Reinstall Packages" for the US models using the volume keys and then press the home button for I9000 and I9000M and the power button on the right top side for US models to start the process.
=====================================================================
Done! You are rooted.
=====================================================================
UnRooting Instructions:
To UnRoot follow the same instructions except click on the Unroot button. If you rooted using another process you can use this process to unroot as long as you didnt load a rom that created links to busybox. I would suggest to restore you phone back to stock ROM before even needing to unroot and if you are on stock unroot all you want otherwise what is the point of unrooting.
=====================================================================
Getting Started with Android After Rooting:
Superuser app issue: Found out the issue with Superuser App crash. If you install new superuser 2.3.1 the app will crash if you click on the Info Tab. The first Time you One-Click Root you will need to run something as superuser which will add an item the superuser will track then the Info Tab will not Force Close and will display details of the tracked app requesting root access. New Superuser bug but easily ignored.
Flash Clockwork Custom Recovery On your phone:
Follow this URL to find fill information on ROM Manager:
http://forum.xda-developers.com/showthread.php?t=734164
Install ROM Manager from Market.
Launch ROM Manager and click on Backup ROM and save you android O/S stock rooted making getting back to stock un-rooted much easier..
Very Good!!!
Great job!!!
Have you plan for 2.2 version?
tra33372 said:
Great job!!!
Have you plan for 2.2 version?
Click to expand...
Click to collapse
From the title: (Eclair and Froyo)
So I guess its for 2.2 also.
Will this work on any build in 2.1? Does this have superuser + busybox?
Very nice.
Does ist work with JP1 / JP2 /JP3? Anyone have tested?
Other Kits go back to JP2 to root and after back to JP3.
Ive finished updating the OP.
I got the root for 2.2 from hani1980's post:
http://forum.xda-developers.com/showthread.php?t=737817
The root for 2.1 and 2.2 contains busybox, su and Superuser.apk.
swissmike said:
Does ist work with JP1 / JP2 /JP3? Anyone have tested?
Other Kits go back to JP2 to root and after back to JP3.
Click to expand...
Click to collapse
You are correct. I haven't tested this yet, but with the latest JP3 you can not get root by simply applying update.zip. You need to switch back to JP2 kernel and then copy over busybox and su. Then flash JP3 when done again. I do not think this tool does that... I can't see how all of that can be automated.
BlazerRazor said:
You are correct. I haven't tested this yet, but with the latest JP3 you can not get root by simply applying update.zip. You need to switch back to JP2 kernel and then copy over busybox and su. Then flash JP3 when done again. I do not think this tool does that... I can't see how all of that can be automated.
Click to expand...
Click to collapse
Is a SDK Install needed? Or a Terminal App? Can you post a step-by-step guide please?
I like this! Thanks.
swissmike said:
Is a SDK Install needed? Or a Terminal App? Can you post a step-by-step guide please?
Click to expand...
Click to collapse
Everything you need is in OP
No SDK needed. adb is included in the download.
Just need Drivers installed and .net framework4.
Look at requirements above. then follow the steps.
Hope this helps.
Cheers for that! That was simple.
Thanks You!!!
How did you manage to automate the method when rooting JP3? I can not see how this can be automated.
swissmike said:
Is a SDK Install needed? Or a Terminal App? Can you post a step-by-step guide please?
Click to expand...
Click to collapse
Use the method described here, it will root JP3: http://forums.hardwarezone.com.sg/showpost.php?p=47625300&postcount=979
Root for jp2, am I wrong?
I'd say wait for CM6. Then flash it from rom manager when its out should not be much longer. But I do know and love the adventurous.
Sent from my SGH-T959 using XDA App
BlazerRazor said:
How did you manage to automate the method when rooting JP3? I can not see how this can be automated.
Click to expand...
Click to collapse
Read the OP again, maybe even the whole thread (it's only two pages after all) - he says it's not tested with JP3 and that it's not automated for it either...
Oh, and while I'm being facetious, you may as well learn to use the "Edit" button rather than double post
SquidgyB said:
Read the OP again, maybe even the whole thread (it's only two pages after all) - he says it's not tested with JP3 and that it's not automated for it either...
Oh, and while I'm being facetious, you may as well learn to use the "Edit" button rather than double post
Click to expand...
Click to collapse
Sorry about the double post.
If you read through the thread you will find out that the OP replied to a guy who apparently wanted to get it working on JP3. Therefore I also asked the OP how he made it or if work for JP3. He has not replied to that, so I suspect he is only using the "flashing update.zip" method - which will not work with JP3. So, I did read the OP, you just misunderstood the problem
BlazerRazor said:
Sorry about the double post.
If you read through the thread you will find out that the OP replied to a guy who apparently wanted to get it working on JP3. Therefore I also asked the OP how he made it or if work for JP3. He has not replied to that, so I suspect he is only using the "flashing update.zip" method - which will not work with JP3. So, I did read the OP, you just misunderstood the problem
Click to expand...
Click to collapse
Fair play, I'm in a hospital with my missus - shouldn't really take out my frustrations in that way but these places always put me on edge
Blazer, don't make me flex...
J/k
Sent from my SGH-T959 using XDA App
Related
IMPORTANT NOTES, MUST READ FIRST
- IF 3-BUTTON-COMBO DOES NOT WORK ON YOUR PHONE, FIX IT BEFORE FLASHING! FIX IS THERE: http://forum.xda-developers.com/showthread.php?t=785201
- IF PHONE STUCKS AT ANIMATED "S", DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
- IF YOU HAVE FORCE CLOSES, DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
- PLEASE UPDATE KIES TO NEWEST VERSION BEFORE FLASHING!
- MAKE A BACKUP OF YOUR /efs FOLDER!
- DO NOT RESTORE APPDATA WITH TITANIUM BACKUP IF YOU UPGRADE FROM 2.1 TO JPH
------------------------------------------------------------------
HOWTO UPGRADE TO JPH USING KIES:
- Create a Shortcut on your Desktop with Target "notepad.exe", name it whatever you want
- Right Click on the new Icon and choose "Run as Administrator"
- File -> Open -> C:\Windows\System32\drivers\etc\hosts
- Add the following Line:
174.123.5.146 fus.samsungmobile.com
- File -> Save (If you get an Permission Error, disable UAC at System Settings -> User Accounts)
- Start -> Run -> cmd
- ipconfig /flushdns
- Open Kies
- Connect your Phone
- Wait till Kies has recognized your Phone
- Press the "Firmware Update"-Button
- Press CTRL+ALT+U+P to activate Test Mode
- Follow onscreen Instructions
AFTER FLASHING REMOVE "174.123.5.146 fus.samsungmobile.com" FROM YOUR HOSTS FILE!
Thanks to asgard!
------------------------------------------------------------------
HOWTO UPGRADE TO JPH USING ODIN:
Download: http://www.multiupload.com/C0PUZUPBX2
Odin3 v1.3 and Pit 803 included!
- Extract
- Open Odin
- Enable Re-Partition Checkbox
- Choose "s1_odin_20100803.pit" as PIT
- Choose "GT-I9000_I9000XXJPH_I9000OXAJPH_CODE-MODEM-CSC.tar.md5" as PDA
- Start Phone in Download-Mode
- Connect Phone via USB
- Flash
- Goto Recovery and do Factory Reset / Data Wipe
- Reboot
Thanks to Richthofen!
------------------------------------------------------------------
HOWTO ROOT JPH FIRMWARE:
New and much easier method to root your Phones!
http://forum.xda-developers.com/showthread.php?t=788108
- Root
- Superuser 2.3.6.1
- Busybox 1.15.3
- "2e" recovery (can flash self-signed update.zip's)
- Integrated fix for ClockworkMod's nandroid (2.5.0.4)
Thanks to Chainfire!
------------------------------------------------------------------
HOWTO APPLY LAGFIX TO JPH:
http://forum.xda-developers.com/showthread.php?t=760571
------------------------------------------------------------------
HOWTO GET INTO RECOVERY:
- Turn off your Phone
- Hold VOLUME UP + HOME Buttons
- While holding VOLUME UP + HOME Buttons press POWER Button
- If Display goes active, release all Buttons otherwise Phone will do a Reboot-Loop
------------------------------------------------------------------
HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------
Problems?
Read this Post: http://forum.xda-developers.com/showthread.php?t=783403
And this Post: http://forum.xda-developers.com/showthread.php?t=769400
Changelog, Reviews, Impressions:
http://forum.xda-developers.com/showthread.php?t=783819
Thanks! It works
Question: can i use this method to root if i am updating to JPH through KIES? i have also the files required for flashing from SamFirmware.
Yes, doesn't matter how you flashed to JPH.
thanks. will try rooting in a while. =]
Yay! Thank you!!
Added Step-by-Step Instructions for Updating using Kies!
Great! Thank you!
Does this root also give us the old 2e bootloader?
Update.zip for 2.2 with Superuser 2.3.6.1
my update.zip is now included in the root in the first post!
EarlZ said:
Does this root also give us the old 2e bootloader?
Click to expand...
Click to collapse
No.
My Phone is still on 3e.
I am currently running JM8 with Voodoo Lagfix. Does the lagfix need to be removed before updating to JPH using the Kies method?
BackfireNL said:
Hey people use my update.zip instead of the one included in the root in this post![/COLOR]
I updated it to Superuser 2.3.6.1
Click to expand...
Click to collapse
Correct Link?
is it worth to upgrade to jph, coming from Stock fw? or should i wait till offiical froyo?
Thanks for the howto
how does the hosts file trick allow us updating to this from any firmware?
is it just proxy or something more?
tuxing said:
Thanks for the howto
how does the hosts file trick allow us updating to this from any firmware?
is it just proxy or something more?
Click to expand...
Click to collapse
It´s an fake Firmware-Update-Server by asgard.
Entry in Hosts File will advise your PC to use 174.123.5.146 when a connection to fus.samsungmobile.com should be established.
BackfireNL said:
Hey people use my update.zip instead of the one included in the root in this post!
I updated it to Superuser 2.3.6.1
Download in this post!
Click to expand...
Click to collapse
Hummm, but you have there:
BackfireNL said:
"* This method is not working for Froyo 2.2 roms"
Click to expand...
Click to collapse
so?
Great, works really well only to bad i didn't read to backfirenl post for the updated superuser can i still update the superuser isn't that possible
great work thank you
BackfireNL said:
Hey people use my update.zip instead of the one included in the root in this post!
I updated it to Superuser 2.3.6.1
Download in this post!
Click to expand...
Click to collapse
thanks backfire
but why is the creation dates of su superuser etc in your update.zip in 2008s
also why the big difference in size?
thanks
Updated OP: New update.zip with Superuser 2.3.6.1 included
I'm proud to present you the GN Fastboot Flasher (GNFF)
I love the simplicity and the convenience of Odin, but it's close source and also there a few files to flash with Odin. So I decided to create an Odin-like app, but for using with fastboot.
Remember that this app is in Beta stage may not be a complete and safe way of flashing. By using this software, you accept its danger.
This app only works on Windows. I have no plan to distribute it to Linux/Mac. The reason is clear, I know nothing from coding on Linux/Mac .Also I'm sure there are lots of work to do in the windows version.
GNFF Functions:
Flashing boot.img, zImage, zip file containing zImage
Flashing radio, bootloader, recovery, system
Flashing stock image files (.tgz)
Flashing stock image files automatically by downloading from Google servers
To do:
Add other options, like unlocking bootloader - Done
Make logging better and complete - Done
Add other languages
Bugs:
You say!
Changelog:
Version 1.5.0:
Fixed image downloading problem.
Added ability to update the program(Wait till the next version).
Added a part named "Addons".
Added ability to unlock/lock the bootloader.
Added Console to execute commands using adb and fastboot.
Some aesthetic changes.
Added support for JB ROMs.
Now you can inter "Custom" for your current ROM, and GNFF will download and install the latest official ROM.
Added a button to clear the log.
New icon.
Added abiliy to use drag & drop for flashing files.
Adding ability to use "open with..." for flashing files
Version 1.0.2:
Added an option to download and flash stock images from Google servers
Added an option to reboot to bootloader
Fixed the bug that was causing the log part don't be scrollable
Now GNFF doesn't let stop the flashing progress using repressing "Start" button
Version 1.0.1:
Added bootloader control, now it doesn't flash anything on devices with locked bootloader.
Added zImage control, now it gives an error in the log section when the zip file doesn't contain a zImage.
Added some more log informations.
Version 1.0.0:
Initial version
Sources:
To be honest, I'm not pro in using Git and publishing open source apps. Anyway I pushed them to github. You can compile them using AMS.
https://github.com/sinamosavi/flasher
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads:
ExpressLeech - HipFile
Very important note: I have not signed this program with a Microsoft Certificate. So some antivirus programs "may" know it as a malware. If they deleted/quarantined it, restore the file and don't let them scan it again.
If you liked this program, please rate the topic as 5 star and press "Thanks" button.
Reserved for FAQ...
looks interesting. looking forward to test it out later
It seems a good idea, good work, carry on
Added 1.0.1 version to the first post. Enjoy!
I have no need to use this at the moment so won't try it. It looks very good though and I hope you keep up the development.
Super cool idea. So we can use this app to install latest stock images from Google. Could we install also Cwm images ( is this the recovery part)?
Sent from my Galaxy Nexus
albsat said:
Super cool idea. So we can use this app to install latest stock images from Google. Could we install also Cwm images ( is this the recovery part)?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Yes.
That option is for flashing recovery image files.
I think the potential for this app is really great. It could be used for senarios like:
1) Unlock bootloader
2) update image
3) install an image with root
etc...
albsat said:
I think the potential for this app is really great. It could be used for senarios like:
1) Unlock bootloader
2) update image
3) install an image with root
etc...
Click to expand...
Click to collapse
Yes. I will add this features soon, but now I prefer to focus on fixing bugs rather than adding features.
Also, I didn't catch what you mean about update image.
sinamosavi said:
Yes. I will add this features soon, but now I prefer to focus on fixing bugs rather than adding features.
Also, I didn't catch what you mean about update image.
Click to expand...
Click to collapse
I meant update image (by downloading a google image directly).
Sent from my Galaxy Nexus
Unfortunately ALL of the USB ports of my laptop are broken since yesterday. So I cannot test anything and you may see a lot of errors in this build. However 1.0.2 is ready and you can download it from the first post. Enjoy!
Looks good! Great Job Sina
Thank you
Bumping this thread. Any further development?
albsat said:
Bumping this thread. Any further development?
Click to expand...
Click to collapse
Fortunately, yeah.
Since last month, I was working to fix all the bugs and make GNFF fully stable. Now I think I have done it. I hope you enjoy this software.
is there already an option to show the Gnex's current version of bootloader / firmware / baseband etc etc?
By the way nice work there.
this app is great but how to use it ?
i tried many time but the app said my phone wasn't connected,
but it shown connected in android.
please release the tutorial mate.
kickthefreak said:
this app is great but how to use it ?
i tried many time but the app said my phone wasn't connected,
but it shown connected in android.
please release the tutorial mate.
Click to expand...
Click to collapse
Have you installed adb drivers ? If not that's the issue . Boot in to bootloader ( power off the device - press volume up + down + power button ) then it'll ask for adb drivers . You can find the gnex adb drivers from googling .
After installing drivers , you are good to go .
.. Beamed Directly Via GNEX ..
file is no longer available...
Awesome dude!
Sent from my Galaxy Nexus using xda app-developers app
Introduction :
Hallo, I want to tell you another root method for xperia m dual. I have try many rooting tool until I found this method. Btw this isn't my work, I'm just sharing it.
Requirement :
1. Download tool to your pc here Cydia Impactor (Read the website for detailed information about the exploit method.)
Step (Half Root) :
1. Extract the files.
2. Open the impactor.exe.
3. Connect your phone to your pc with usb debugging enabled.
4. In the impactor app click start.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. After that download SuperSU from playstore.
6. Open the SuperSU app and click continue->normal install.
7. At this step your phone has been half rooted, to make it full rooted follow the step below.
Step (Full Root) :
1. Download and install the latest stable Busybox - thanks to @esrom02
2. Download Tool By Anto Kus to your pc and extract it. (Download here Rootfixer(2shared) or Rootfixer(mediafire)) source : http://forum.xda-developers.com/showthread.php?t=2457174
3. Connect your phone to your pc with usb debugging enabled.
4. Run supersu.bat from extracted tool by Anto Kus.
5. Wait until the phone reboot and then wait until the supersu.bat finish.
6. Enjoy your full rooted phone, you can install link2sd, foldermount, etc.
For Unroot :
1. Open the SuperSU app.
2. Go to setting and choose Full Unroot.
Full Credit :
@saurik (the developer of this tool)
NB : For moderator, feel free to move this thread if I post it in wrong section, thanks in advance.
thank you sir you've made my day
succesfully rooted my C2005 FW 15.2.A.2.5
working :laugh: :highfive: :good:
Successfully updated Firmware and now looking forward for Rooting, and before that do i need to use the Tool by Anto Kus for Full Root? The source in OP was for 1904/1905 and I'm on 2004.
ansebovi said:
working :laugh: :highfive: :good:
Click to expand...
Click to collapse
what about link2sd ??
SK:) said:
Successfully updated Firmware and now looking forward for Rooting, and before that do i need to use the Tool by Anto Kus for Full Root? The source in OP was for 1904/1905 and I'm on 2004.
Click to expand...
Click to collapse
you dont need Tool for Fullroot anymore.. :victory:
SK:) said:
Successfully updated Firmware and now looking forward for Rooting, and before that do i need to use the Tool by Anto Kus for Full Root? The source in OP was for 1904/1905 and I'm on 2004.
Click to expand...
Click to collapse
It's okay, just run that tool and you'll be full rooted.
aerialus said:
you dont need Tool for Fullroot anymore.. :victory:
Click to expand...
Click to collapse
You must run that tool to full root your phone, if you don't, you will still have auto reboot if you want to use folder mount or link2sd.
So far this is the best ROOTING method EVER..
Thanks for sharing this !
I read somewhere it works on all android devices.. is it TRUE?
durveshthorve433 said:
So far this is the best ROOTING method EVER..
Thanks for sharing this !
I read somewhere it works on all android devices.. is it TRUE?
Click to expand...
Click to collapse
No, this method work just for android without master key bug patch, because this method use that bug to exploit the su binary and luckily sony not patch that bug.
strange when I tried to root, a dialog box appeared saying "Device not found". Any advice? thanks
Edit: I suspect I need to install the Sony companion software to get the drivers! My first sony phone
Edit 2: Yes, that was the problem! Thanks for the rooting tip!
RF-XDA said:
It's okay, just run that tool and you'll be full rooted.
You must run that tool to full root your phone, if you don't, you will still have auto reboot if you want to use folder mount or link2sd.
Click to expand...
Click to collapse
This method has fully rooted my Xperia™ M Dual C2004.
I just used this Application and then used ES File Explorer to Mount R/W and viola! No reboot problem.
EDIT : THIS WILL NOT GIVE FULL ROOT. FOLDER MOUNT CAUSED REBOOT. BUT AFTER APPLYING THE PATCH FROM [NUT] EVERYTHING IS FINE.
Unroot
Is there also a method on how to unroot? For warranty concerns just in case
Tommienots said:
Is there also a method on how to unroot? For warranty concerns just in case
Click to expand...
Click to collapse
You can unroot, there is an option 'full unroot' on SuperSU settings.
Sent from my C2004 using Tapatalk
It works perfectly, thank you.
Full Root
I just bought my Xperia M C1905 today, is this full root? Or not? Or will become full root after using Tool by Anto Kus? :highfive: One more thing, does it matter which FW version is installed? I currently have 15.1.A.1.9 but there is an update 15.1.C.2.3 and before I root this, I want to get that update. Please advise.
esrom02 said:
I just bought my Xperia M C1905 today, is this full root? Or not? Or will become full root after using Tool by Anto Kus? :highfive: One more thing, does it matter which FW version is installed? I currently have 15.1.A.1.9 but there is an update 15.1.C.2.3 and before I root this, I want to get that update. Please advise.
Click to expand...
Click to collapse
Update first, then root and use the tool
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Hi, thank you very much for this tool, it really is the simplest.
I noticed that I get adverts in my apps now, but I have all the ad-blockers installed. I tried the update fix as well. Previously, I used V-root which definitely did give enough permission to block ads. Has anyone else experienced this i.e. some root issues?
I did try uninstalling everything and retrying a few times but it's still the same.
SharpnShiny said:
Hi, thank you very much for this tool, it really is the simplest.
I noticed that I get adverts in my apps now, but I have all the ad-blockers installed. I tried the update fix as well. Previously, I used V-root which definitely did give enough permission to block ads. Has anyone else experienced this i.e. some root issues?
I did try uninstalling everything and retrying a few times but it's still the same.
Click to expand...
Click to collapse
No, I didn't faced any such problem.
But ya this didn't gave me full root without usin the tool by [NUT].
So this method, as stated in the op itself, helps in rooting but isnt a complete root.
Sent from my C2004 using Tapatalk
Antrikos48 said:
Update first, then root and use the tool
This message was brought to you from my Sony Xperia M C1905 using Tapatalk.
Click to expand...
Click to collapse
Thanks, I'm rooted but not Full, the tool doesn't gave me full root, any suggestion? I don't want to install CWM :/
Edit: I want to try rooting using Framaroot, but since I followed this, is there anything I should do first before proceeding with framaroot?
esrom02 said:
Thanks, I'm rooted but not Full, the tool doesn't gave me full root, any suggestion? I don't want to install CWM :/
Edit: I want to try rooting using Framaroot, but since I followed this, is there anything I should do first before proceeding with framaroot?
Click to expand...
Click to collapse
Hi, search Xperia™ M General. There you will find a shared tool to full root witout framaroot.
Sent from my SM-T311 using Tapatalk
I was updating pokemon go to version 0.37.0 and then the app shows me this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE:The Device In The Photo Is Not Mine
NOTE: I Dont Have Root or Custom Rom On My Device
I asked this here because I have Elephone P8000
and for my friend it work and he Dont has root or custom reovery quite like me (BUT HE DONT HAS ELEPHONE P8000)
Please help me!!!
new update... (0.39.0) now I has another problem here is a screen shot:
NOTE : I am using a google account
and I think that I know why this happening to me and others that has this new problem because of that I cant pass the google saftynet test
I think that you cant pass too if you wanna test just download the app from this link:https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample&hl=en
NOTE: IF YOU DONT PASS , then that's why the other problem happens to you that's something I know about that.
more information : In the test what I got is X and SafetyNet request: success , response vaildation: success , CTS profile match :false
Try your best to help me and all the others in the two problems!:victory::good:
I'd also love an answer to this, there must be a ROM that we can use? I unrooted but that wasn't enough.
This "error" is caused by a rooted phone and the latest appupdate. Unroot the phone and you can play the game again. https://support.pokemongo.nianticlabs.com/hc/en-us/articles/221958248
Gesendet von meinem p8000 mit Tapatalk
alandur said:
This "error" is caused by a rooted phone and the latest appupdate. Unroot the phone and you can play the game again.
Gesendet von meinem p8000 mit Tapatalk
Click to expand...
Click to collapse
Hi there,
Same problem Here. My Elephone P8000 is not rooted, when I bought it, it came without ROOT. I've checked with ROOT CHECKER and actually says it is not rooted, but the problem is there, so the solution is not to unroot the phone because it isn't... Sooooo any advice for all the people who are suffering this problem?
Same Problem. P8000 is not rooted. Checkt by Root Checker.
Android 5.1 installed.
Kernal : 3.10.65
Baseband-Version : MOLY.LR9.W1444.MD.LWTG.MP.V16.P10
Build-Nummer :
ALPS.L1.MP3.V2_NB6753.65U.L1_P22
Custum build Version
Elephone_P8000_20160319
Can anyone play the Pokémon Go Version 0.37.0 with the P8000?
alandur said:
This "error" is caused by a rooted phone and the latest appupdate. Unroot the phone and you can play the game again. https://support.pokemongo.nianticlabs.com/hc/en-us/articles/221958248
Gesendet von meinem p8000 mit Tapatalk
Click to expand...
Click to collapse
I Dont have root You know that! (I worte that)
ghostger said:
same problem. P8000 is not rooted. Checkt by root checker.
Android 5.1 installed.
Kernal : 3.10.65
baseband-version : Moly.lr9.w1444.md.lwtg.mp.v16.p10
build-nummer :
Alps.l1.mp3.v2_nb6753.65u.l1_p22
custum build version
elephone_p8000_20160319
can anyone play the pokémon go version 0.37.0 with the p8000?
Click to expand...
Click to collapse
wow i am not the only one that have that problem.....
Steve571 said:
I'd also love an answer to this, there must be a ROM that we can use? I unrooted but that wasn't enough.
Click to expand...
Click to collapse
this will help you? http://www.androidpolice.com/2016/09/11/guide-play-pokemon-go-0-37-rooted-android-magisk/
NOTE: ROOT YOR DEVICE AGAIN BEFORE YOU USING THIS SOLUTION!
NOTE : I Dont Want To Root My Device That's Why this thread is not closed
liraz747 said:
this will help you?
NOTE: ROOT YOR DEVICE AGAIN BEFORE YOU USING THIS SOLUTION!
NOTE : I Dont Want To Root My Device That's Why this thread is not closed
Click to expand...
Click to collapse
No, I have tried that, something else (I think unofficial ROM) is causing it to fail.
Steve571 said:
No, I have tried that, something else (I think unofficial ROM) is causing it to fail.
Click to expand...
Click to collapse
I hope That Someone with knowledge will come soon.
Still no fix?
I'm using Blueflames Cyanogenmod and find a way to make PG working on my rooted P8000.
1. Install SManager from Playstore.
2. Download the attached Script from cyanogenmod forum.
3. Check if the path to the su binaries is correct.
4. If it is not running, try to set the Script in non daemon mode. If it's working than edit line 6 of the Script from if['$1"!="-D]; then to if['$1"="-D]; then. This is how the script works on Blueflames Cyanogenmod.
5. Add the Script to SManager and enjoy.
Most Questions that can come up are answered in the thread at the cyanogenmod forum.
hth
Cheers
jknarf said:
Still no fix?
I'm using Blueflames Cyanogenmod and find a way to make PG working on my rooted P8000.
1. Install SManager from Playstore.
2. Download the attached Script from cyanogenmod forum.
3. Check if the path to the su binaries is correct.
4. If it is not running, try to set the Script in non daemon mode. If it's working than edit line 6 of the Script from if['$1"!="-D]; then to if['$1"="-D]; then. This is how the script works on Blueflames Cyanogenmod.
5. Add the Script to SManager and enjoy.
Most Questions that can come up are answered in the thread at the cyanogenmod forum.
hth
Cheers
Click to expand...
Click to collapse
Does this still work for you?
Still working with root.
jknarf said:
Still working with root.
Click to expand...
Click to collapse
Which Superuser app do you use? Somehow I don´t get it to work
I use the cyanogenmod built in super user app, but it should work with Chainfires SU too.
I just don't get it to work it would be super awesome if you could Upload your edited Skript. Probably it could solve it
That simple app worked for me
"root switch" apk from https://www.asus.com/zentalk/tw/for...wNDk1fGJmMjhjZGZifDE0NzY0MDUzNjB8MHwxNzM1NDI=
Okay, it's update time.
This night there comes the PokemonGo 0.43.4 and the previous work around with the script will not work any longer.
So there are two ways afaik, that make PoGo work again.
1. If simply SuperUser on a stock ROM installed, you may have luck with the latest 'root switch' , version 1.3.3.2, from chakalaca at zentalk
http://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=173542&page=37#pid962740
2. Use the latest Magisk, that will make it too.
http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download the Magisk Manager and the latest phh SuperUser and install the zips with TWRP or any other recovery.
Now comes the tricky part.
You have to remove every other sign of SuperUser from other installation. Often it is enough to use the unroot option of the installed SuperUser app, but if you have Cyanogenmod, or an Cyanogenmod based ROM, installed you need to remove the su binaries by hand. Best way for me is, to remove the su binaries use the recovery and adb. The su binary is located in /system/bin or /system/xbin. You need to mount the sytem partition rw but that should be an easy task with TWRP. And, Cyanogenmod Users, don't forget to disable builtin root first.
Cheers
jknarf said:
Okay, it's update time.
This night there comes the PokemonGo 0.43.4 and the previous work around with the script will not work any longer.
So there are two ways afaik, that make PoGo work again.
1. If simply SuperUser on a stock ROM installed, you may have luck with the latest 'root switch' , version 1.3.3.2, from chakalaca at zentalk
http://www.asus.com/zentalk/tw/forum.php?mod=viewthread&tid=173542&page=37#pid962740
2. Use the latest Magisk, that will make it too.
http://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Download the Magisk Manager and the latest phh SuperUser and install the zips with TWRP or any other recovery.
Now comes the tricky part.
You have to remove every other sign of SuperUser from other installation. Often it is enough to use the unroot option of the installed SuperUser app, but if you have Cyanogenmod, or an Cyanogenmod based ROM, installed you need to remove the su binaries by hand. Best way for me is, to remove the su binaries use the recovery and adb. The su binary is located in /system/bin or /system/xbin. You need to mount the sytem partition rw but that should be an easy task with TWRP. And, Cyanogenmod Users, don't forget to disable builtin root first.
Cheers
Click to expand...
Click to collapse
do there is a way without root ?
and if not, do there is a way to root without recovery?
please reply
PoGo should work, if there is really no root. You can check with a file manager of there is a su binary in /system/bin or /system/xbin.
If there is a su binary, you need to delete it.
Post 1 - Information
Post 2 - Downloads and Release / Change Information
Post 3 - Bugs, Future Additions to the GUI, FAQ
PLEASE READ THE PARAGRAPH BELOW THIS LINE
It's been a few years since I made a toolkit. Since my last toolkit that I released, which was the M8, I had surgery done, graduated college and went through a ton in life. I haven't been in the Android scene in years. As much as I would have loved to, life has been hectic. I announced that I was going to release a toolkit for the HTC 10. It's been a few months since that announcement but here it is. I'm pretty sure there is quite a few kinks and bugs I'll need to fix, but I spent a lot of time on it and my eyes are tired at looking at all my code. Trying to remember how to code/script was hard enough as is, but it's definitely worth it for you guys. So to announce my software, I would like to present my toolkit for the HTC 10!
If this helped you out, Please press the thanks button and if you want, you can always donate!
FEATURES
- Install HTC Drivers
- Enter Bootloader
- Get Token ID. Register at HTCDev, login to the site and submit the Token ID.
- Unlock Bootloader (Must place Unlock_code.bin in the folder)
- Various useful commands
- Install Recoveries
User Provided Recoveries
TWRP
Kernels
User provided kernels
- Link to this thread
- Link to PM me if you need a phone unlocked
- Link to the One Development thread
- Boot Into Recovery/Bootloader/Phone
- Flash kernel/recovery/RUU zip
- Relock Bootloader (must be in fastboot)
- APK Batch Installer (Credits to hamsteyr)
- Donate to me (Hasoon2000) -> Donating to yours truly for putting time into this!
Here is a screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
Credits
- The guys at the AutoIT help forum that helped me learn how to make the script!
- Devs for making us ROMS!
- The community for being awesome!
- HTC for making us the phone so we can be a community!
- To everyone else I may have forgotten!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
Donations
Downloads
https://www.androidfilehost.com/?w=files&flid=158224
Changes
V1.0 Released! 1-14-2017
- Initial Release
v1.0.1 released! 3-1-2017
- Updated to unofficial TWRP 3.0.3.3 (thanks to 2WildFirE for providing the link and to Captain_Throwback for creating it!)
- Updated link to AndroidFileHost
v1.0.2 released! 3-5-2017
- Updated to unofficial TWRP 3.0.3.10
Bugs
- Directory has to have one word.
Ex:
Will Work. This will solve any issues if the buttons don't work when you press them.
C:\Users\John\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
C:\Users\John_Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
Will NOT work. Your directory will look something like this and buttons won't work when you press it.
C:\Users\John Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
If you have 2 words, put the folder in Drive C:
Ex. This will solve any issues if the buttons don't work when you press them.
C:\Amaze_All-In-One_Kit_V2.4
Click to expand...
Click to collapse
Looking to add in the future
- More recoveries
- Makes Requests!!!
FAQs
Q - Why Did you make this?
A - To make life easier
Q - You are limited on features. Why?
A- You can always make a request!
Q - Will this work on other devices?
A - Only the fastboot commands, HTC Dev unlock (device specific) and the HTC drivers. Toolkit is made for the specific device.
Q - My Anti-Virus says your program is a virus. Is it a really a virus?
A - No. It's a false-positive! My reputation on here shows otherwise. Here's some more info if you are skeptical.
https://www.autoitscript.com/wiki/AutoIt_and_Malware
Q - Will you support more devices in the future?
A - If people REALLY want, I can make it happen. I just don't want to make anything that nobody would use.
Q - Awesome! Can I make a donation?
A - Of course! Do not feel obligated though. If you would like to make a donation, you can click the button on my toolkit or under my username.
Any feedback is always nice!
Sent from my HTC 10 using Tapatalk
My phone has unlocked bootloader, still S-ON, used the tool kit to flash TWRP.
Everything run successfully but the phone can not enter Recovery to run backup. It just restart the phone normally.
I have tried many TWRP version, but still can not enter the Recovery.
HTC 10 - US Unlocked Version.
2.38.617.6
@clv2k @hasoon2000
Use unofficial version 3.0.3.0 twrp
Read post #2
https://forum.xda-developers.com/showthread.php?p=66347165
HTC_10 & Tapatalk
clv2k said:
My phone has unlocked bootloader, still S-ON, used the tool kit to flash TWRP.
Everything run successfully but the phone can not enter Recovery to run backup. It just restart the phone normally.
I have tried many TWRP version, but still can not enter the Recovery.
HTC 10 - US Unlocked Version.
2.38.617.6
Click to expand...
Click to collapse
Were you trying to reboot into recovery through the toolkit? If so, I'll test the command when I'm back home and look at the script. Have you tried doing so manually?
Sent from my HTC 10 using Tapatalk
awesome!
hasoon2000 said:
Were you trying to reboot into recovery through the toolkit? If so, I'll test the command when I'm back home and look at the script. Have you tried doing so manually?
Click to expand...
Click to collapse
I tried to flash TWRP manually by adb command and reboot to recovery but my phone still not enter it. What's wrong with the phone
Edit: Thanks Linar10, I replace TWRP 3.03.0 to the toolkit it run successful.
Thanks Hasoon2000 for the toolkit
I used the toolkit for my wife's 10. I did everything from zero to check if everything was OK and boy, it went smooth. Thanks a lot for the toolkit and for sharing it. It rocks.
https://forum.xda-developers.com/devdb/project/dl/?id=22854 latest twrp
Powered by the 10
I figured by now most people would realize how dangerous toolkits are, and would have stopped using them.
It's much safer to not use a toolkit, and you learn a lot more by learning, and performing the commands yourself.
Why would you have an S-ON command so close to a GETVAR command? Just something someone will accidentally click.
I've see many people come to IRC asking for help, saying "I didn't do anything to set my S-ON, all I did was use a toolkit."
The laptop is full of viruses and I have to take format
HTC 10 cihazımdan gönderildi
Zanzibar said:
I figured by now most people would realize how dangerous toolkits are, and would have stopped using them.
It's much safer to not use a toolkit, and you learn a lot more by learning, and performing the commands yourself.
Why would you have an S-ON command so close to a GETVAR command? Just something someone will accidentally click.
I've see many people come to IRC asking for help, saying "I didn't do anything to set my S-ON, all I did was use a toolkit."
Click to expand...
Click to collapse
I agree in part.
Yes, you learn a lot more by studying and asking how to type the commands yourself, but I see this toolkit (hasoon's is the only one I've used) as a way to begin with all this. I mean, you have to start somewhere and this is a valid way of doing it. You click some buttons, follow the instructions and if you are careful you can be sure you won't mess anything up.
That's how I started learning until I was able to do things myself. I don't have s-off because I don't know enough to be 100% sure I won't kill my phone, so I prefer doing some things (flashing kernels) from fastboot instead of recovery and not experimenting with different radios and such.
In short, you have some very valid points, but people has to start somewhere and this one is too a good way of doing so.
the file is a .exe not a .rar?????? One-10_All-In-One_Kit_v1.0.rar.exe
hasoon2000 said:
Downloads
http://d-h.st/users/hasoon2000/?fld_id=2808#files
Changes
V1.0 Released! 1-14-2017
- Initial Release
Click to expand...
Click to collapse
Hi, I cannot download the tool, is the link down?
seawind107 said:
Hi, I cannot download the tool, is the link down?
Click to expand...
Click to collapse
Works just fine for me, bud
File ok?
Can anybody tell me that the file is ok? thats the original file of the All-in-one Toolkit V1.0 downloaded today fom the original source...
Hello I can't download the toolkit. Every time it's taking me to download some chrome addons. Seems very fishy.
The file in the previous post also seems not legit. Toolkit is supposed to be 40 MB, this file is about 1MB...smells of viruses to me.
ulmcity said:
Can anybody tell me that the file is ok? thats the original file of the All-in-one Toolkit V1.0 downloaded today fom the original source...
Click to expand...
Click to collapse
madzur said:
Hello I can't download the toolkit. Every time it's taking me to download some chrome addons. Seems very fishy.
The file in the previous post also seems not legit. Toolkit is supposed to be 40 MB, this file is about 1MB...smells of viruses to me.
Click to expand...
Click to collapse
@ulmcity , looks legit @mazdur , as long as @hasoon2000 has been doing this i dont think he'd post a bogus link especially not on xda. Follow the link in the OP and itll take you straight to dev-host, if it doesnt then YOURE doing something wrong dude. Heres the link.
http://d-h.st/users/hasoon2000/?fld_id=2808#files
Sent from my 2PS64 using XDA-Developers Legacy app