Related
YES YOU NEED TO READ THIS WHOLE POST, PROB MORE THEN ONCE TO MAKE SURE YOU GOT IT. YES I KNOW HOW LONG IT IS, I TYPED IT!
*Also note that not all sections will apply to you. I have tried to seperate different senerios using * at each one. Also more then one section here may be needed by you.
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
first go here and read this for info: http://forum.xda-developers.com/showthread.php?t=838484
now since your here im going to assume that its too late.
*things you will need.
copy of cwm recovery. get it here (the manual install link): http://forum.xda-developers.com/showpost.php?p=9145724&postcount=28
adb installed and working.
a known good rom, or nandroid backup. here is one: http://forum.xda-developers.com/showthread.php?t=836042 (use odex one)
a wpthis.ko for YOUR specfic kernel (run (adb shell cat /proc/version) that will tell you what kernel you have)
*first thing we need to know is, are you s-off or s-on now?
if your s-off just boot into clockwork mod recovery, wipe the phone and flash a known good rom and be done with it. if you dont have cwm recovery installed. boot into fastboot (vol down+power) you must have the sdk/adb installed and working, and type fastboot flash recovery LocationOfRecovery.img (where LocationOfRecovery.img= where you have the recovery, ie c:\android\recovery.img). once thats installed follow instructions above.
*if you are s-on:
will the phone boot into android? if so your not bad off.
if you want to unroot to return the phone, follow the unroot thread here: http://forum.xda-developers.com/showthread.php?t=835971
if you dont want to unroot then you have a couple of different options. if you have cwm recovery still installed, just follow instructions above and flash a known good rom. ive been told that boot.img (kernel) wont flash if you are s-on. the way to fix this (temporarily) is boot into recovery, but before you flash run these commands:
(put wpthis.ko in sdk folder)
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
then proceed to flash the rom. once booted into android skip down to, "now to get back to s-off"
*if you have stock or eng-recovery installed.
will the phone attempt to boot android at all? where is it stuck at?
a good min after it starts to try to boot, type these commands:
adb remount
adb shell
if you can get in shell then theres still hope. back out shell for a second and start here:
put the cwm recovery.img and wpthis.ko in your sdk folder
adb remount
adb push wpthis.ko /data/local/wpthis.ko (specific for your kernel)
adb push recovery.img /data/local/recovery.img
adb shell
# insmod /data/local/wpthis.ko (should get same function not implemented error as when u rooted first time)
# dd if=/data/local/recovery.img of=/dev/block/mmcblk0p21 (now wait a min or 2 to give it time to finish)
#sync (give it another min or to just to be safe)
#reboot recovery
at this point you should be in cwm recovery. follow instructions above for flashing with s-on.
*if you cannot get into shell while booting, but have eng-recovery installed, there might be some options.(however this is all theory)
boot into recovery-
if you are on linux using adb, you can try taking sh from /system/bin folder of any custom rom, chmod 0755 it, then push it to /system/bin and adb shell might work.
windows-
boot into recovery.
a system.img compatible with your installed kernel pushed may work. put the system.img into the sdk folder.
adb push system.img /data/block/mmcblk0p25
then reboot and see where you are. if that dont work, grab the modified miscnew.img here: http://www.4shared.com/file/pUPfrGi-/mmcblk0p17.html
rename it misc.img put it in sdk folder and
adb push misc.img /dev/block/mmcblk0p17
then reboot into bootloader with PC10IMG.zip on root of sdcard and it should run though. if it does your fully stock and get to start all over again.
*if you cannot get into shell, and you have stock recovery, s-on, and post OTA, im sorry your pretty screwed. as of right now the only thing thats gonna bring it back is a full img/update signed from htc thats equal to or higher then the version currently on the phone. (well and jtag of course)
*well now you've done one of the steps above. your booted into android, you have perm root, and cwm recovery installed, just still s-on. dont worry your almost there!
first take that wpthis.ko for you kernel and push it, and the eng hboot.
adb push wpthis.ko /data/local/
adb push hboot-eng.img /data/local
then from adb shell, or terminal root prompt:
# insmod /data/local/wpthis.ko (again you should get the function not implemented error)
NOW REMEMBER THIS NEXT STEP COULD MEAN DEATH FOR YOU G2 IF TYPED WRONG, AND AFTER ALL THIS HARD WORK!
# dd if=/data/local/hboot-eng.img of=/dev/block/mmcblk0p18
wait a few mins to be sure its done.
# sync
wait a few more just cause.
reboot, you should now be s-off, cwm recovery installed, and free to do whatever you want. just dont go screwing it up again
* as new methods are discovered, or ones here are proven wrong, i will update as necessary. as of the writing post, 2 devices that i know of have been saved!
good luck!
wpthis.ko for bacon bits.03 kernel: http://www.4shared.com/file/OAcd1bix/wpthis-263221-cyanogenmod.html
before you post with problems make sure you have read this at least 2 times. have this info in you post:
what was the last running rom/kernel combo you had?
list EVERYTHING you have done since that point
which recovery is installed?
what happens in recovery when you type
adb devices?
adb remount?
adb shell?
does it try to boot? is it stuck on splash screen, or does it make it to boot animation? 1 min after you turn it on, what happens when you type:
adb devices?
adb remount?
adb shell?
Thank you, really, for taking the time to write this guide. I shared that dreadful feeling of a brick a little while ago, but made it out alive. I know this will help a lot of people.
I'm not bricked, semi bricked or none of that. Rootrd and running BB 0.3
This is the best guide to everything you would need. Too bad you can't post this at the beginning of every thread or some kind of link on every page. This would answer a lot of question if some people would look hard enough. I'm not some smart phone guy by no means. I just read a lot before I ask. In my further reading I can direct people.with further problems here.
Thanks for all your work and giving me another fun hobby
Peace
Sent from my T-Mobile G2 using XDA App
Question why is it that you have "dd if....../mmcblk0p21" in one area and towards the bottom you have "May brick phone ...dd if...../mmcblk0p18." Thought it should always be .../mmcblk0p18?
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA
Good point . Not sure on that one
Sent from my T-Mobile G2 using XDA App
renn9420 said:
Question why is it that you have "dd if....../mmcblk0p21" in one area and towards the bottom you have "May brick phone ...dd if...../mmcblk0p18." Thought it should always be .../mmcblk0p18?
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA
Click to expand...
Click to collapse
if you look where im saying /mmcblk0p21 we are replacing RECOVERY with CWM. i do that because i just dont like the idea of trying to replace hboot from a looping system. worst case something goes wrong, you still have hboot and you can try again. screw up hboot, game over! then once android is back up and running we worry about hboot on mmcblk0p18.
you should not state that steps can be changed if people are brave, someone is going to sip parts and cry that their hboot is boned and now they have a BRICK, this is the best post i have seen in the G2 section thus far and i have been through almost every thread(with any kind of importance) in the dev section and 90% of them in general and Q&A. thank you for this post and let's hope people READ at least 5 times before even starting on this.
Gotcha
Phone: T-Mobile G2/Vision Rooted
Rom: Latest Cyanogen
Recovery: CWM waiting for Amon_RA
Amazing guide, thanks a lot.
fastludeh22 said:
the reason i call it a semi-brick is because a true brick can bot be recovered with out opening the case.
Click to expand...
Click to collapse
I have a full, honest-to-god brick in my drawer (executed dd if=/sdcard/hbooteng.img of=/dev/block/mmcblk0p18 with a wrong "hbooteng.img file).
I'm really, really interested in some guide or info about how to try and recover the brick. I don't mind if I have to open the case, there's not going down from where I am right now.
By the way, my second DZ just arrived, tomorrow I'll try to S-OFF it again... I will have nightmares tonight.
reycat said:
Amazing guide, thanks a lot.
I have a full, honest-to-god brick in my drawer (executed dd if=/sdcard/hbooteng.img of=/dev/block/mmcblk0p18 with a wrong "hbooteng.img file).
I'm really, really interested in some guide or info about how to try and recover the brick. I don't mind if I have to open the case, there's not going down from where I am right now.
By the way, my second DZ just arrived, tomorrow I'll try to S-OFF it again... I will have nightmares tonight.
Click to expand...
Click to collapse
Well it will take a jtag and a lot of research, since it hasn't been done to a g2 yet. Search g1 development forum dor debricking if u want an idea of what's involved.
I remember talking to gtrab a little about your problem. So did you use the wrong file, or did you type an address wrong? What file or typo was it exactly?
What happens when u try to boot into fastboot, or anything else?
{golf clap} on the post.
you sir, have incredible patience... and it's truly appreciated.
fastludeh22 said:
Well it will take a jtag and a lot of research, since it hasn't been done to a g2 yet. Search g1 development forum dor debricking if u want an idea of what's involved.
Click to expand...
Click to collapse
Mmm... It seems all of it is quite a bit over my head.
I remember talking to gtrab a little about your problem. So did you use the wrong file, or did you type an address wrong? What file or typo was it exactly?
What happens when u try to boot into fastboot, or anything else?
Click to expand...
Click to collapse
Don't ask me how I did it, but I actually downloaded a web page instead of the actual hboot file I should have used . I did it from the phone and didn't notice. Since I was supposed to rename it to make the typing easier, I didn't notice it was the wrong file.
Anyway, right now the phone is a complete brick. It doesn't respond to any button presses, the LED doesn't do anything when you plug in the charger... A complete brick.
Device offline?
fastludeh22 said:
before you post with problems make sure you have read this at least 2 times. have this info in you post:
what was the last running rom/kernel combo you had?
list EVERYTHING you have done since that point
which recovery is installed?
what happens in recovery when you type
adb devices?
adb remount?
adb shell?
does it try to boot? is it stuck on splash screen, or does it make it to boot animation? 1 min after you turn it on, what happens when you type:
adb devices?
adb remount?
adb shell?
Click to expand...
Click to collapse
Never used ADB before, followed [forum wont let me post outside links] to set it up. when typing adb devices while in recovery mode, get "list of devices attached
HT09PR204734
offline."
here is a screen shot : [forum wont let me post)
running windows 7 64bit...device not recognized by ADB at alll when stuck on splash screen....did some research couldnt find a real solution...soooo what do you recommend trying?
im stuck on the splash screen.. and i cant get adb to work either.. is missing a driver but i cant for the life of me find one ...
-FuRBz- said:
im stuck on the splash screen.. and i cant get adb to work either.. is missing a driver but i cant for the life of me find one ...
Click to expand...
Click to collapse
Download and instal PDANet, that gave me the drivers i needed for adb, now if only i could figure out how to get my device to register online through the ADB command interface.....
^^ you my friend are awesome! dl pdanet, was able to get the drivers.. was able to go into bootloader and did a recovery from there.. im up and running again!!
marley097 said:
Never used ADB before, followed [forum wont let me post outside links] to set it up. when typing adb devices while in recovery mode, get "list of devices attached
HT09PR204734
offline."
here is a screen shot : [forum wont let me post)
running windows 7 64bit...device not recognized by ADB at alll when stuck on splash screen....did some research couldnt find a real solution...soooo what do you recommend trying?
Click to expand...
Click to collapse
Sounds like you have stock recovery installed, with s-on and no adb/shell access, I'm sorry your pretty screwed. You can try factory reset and see if that helps boot, or to get adb access while trying to boot. Other then that, at the moment the only way to recover is a offical signed pc10img of version equal to or higher then what you have. I'm working hard to come up with something, ill keep you guys informed. I think u said in pm, you have already done the OTA, which makes you version number 1.22.something.
-FuRBz- said:
^^ you my friend are awesome! dl pdanet, was able to get the drivers.. was able to go into bootloader and did a recovery from there.. im up and running again!!
Click to expand...
Click to collapse
Glad you got it! After drivers installed, did you fix it per a section of the op?
it all happened because i had tried flashing cm 6.1- it got stuck on the splash screen but i had done a recovery prior to trying to flash... once i got the drivers installed i was able to get in to adb and do a reboot-bootloader and was able to get into the recovery file
fastludeh22 said:
Sounds like you have stock recovery installed, with s-on and no adb/shell access, I'm sorry your pretty screwed. You can try factory reset and see if that helps boot, or to get adb access while trying to boot. Other then that, at the moment the only way to recover is a offical signed pc10img of version equal to or higher then what you have. I'm working hard to come up with something, ill keep you guys informed. I think u said in pm, you have already done the OTA, which makes you version number 1.22.something.
Click to expand...
Click to collapse
Lame....so how often do they release official pic10img's....? are we talkin a month....or a year?
Okay, I am getting ready to root my phone tonight...
As far as all that - I think I got all that covered.
As far as flashing a recovery - I want to use amon-ra's - RA-evo-v1.8.0 found here - http://forum.xda-developers.com/showthread.php?t=705026
In that post it gives two differant ways to flash the recovery:
via fastboot
Code:
Copy recovery-RA-evo-v1.8.0.img to a location where fastboot can find it.
Boot your phone into fastboot mode
fastboot devices(press enter) (to make sure that fastboot "sees" your phone)
fastboot flash recovery recovery-RA-evo-v1.8.0.img(press enter)
via terminal app or adb => Make sure your rom contains flash_image!!
Code:
Copy recovery-RA-evo-v1.8.0.img to the root of your sdcard
start the terminal app or launch adb
su(press enter)
flash_image recovery /sdcard/recovery-RA-evo-v1.8.0.img(press enter)
reboot recovery(press enter)
My questions are:
first of all - what is "Fastboot"?? I mean is it an application that I can download and install it this way?
second of all - what is a "terminal app"
&
third - what is "adb"?
I keep hearing the term "shell", is a "shell" the same as windows command prompt? Or is that "adb"?
I know these are probably stupid questions for most, but I like to have every thing ready to go before I tackle projects...
Any guidance would be greatly appriciated!!
J
Another option is to install ROM manager and install AmonRa that way. (think you have to pay) Open it and click on Flash Alternate Recovery.
Terminal app is just an application providing terminal-like access to the system. Imagine the command prompt on a Windows system, but understand your phone is running Linux underneath the hood so the commands are different.
adb likely is an acronym for something along the lines of debugger or something. It essentially allows you to communicate with your phone from your computer. So, go to a command prompt and you can enter commands to execute on your phone via adb. (shell = command prompt, adb runs within the shell/command prompt)
You're right in trying to find out as much as possible before tackling something like this.
terrel_b said:
Another option is to install ROM manager and install AmonRa that way. (think you have to pay) Open it and click on Flash Alternate Recovery.
Terminal app is just an application providing terminal-like access to the system. Imagine the command prompt on a Windows system, but understand your phone is running Linux underneath the hood so the commands are different.
adb likely is an acronym for something along the lines of debugger or something. It essentially allows you to communicate with your phone from your computer. So, go to a command prompt and you can enter commands to execute on your phone via adb. (shell = command prompt, adb runs within the shell/command prompt)
You're right in trying to find out as much as possible before tackling something like this.
Click to expand...
Click to collapse
Great, thanks for the response! That helps alot - I searched around a little while waiting for a reply and still didnt clear any thing up. I have already DL'd ROM Manager and I will just use that... I just like to have as much info as I can...
Thank you!
J
How are you going to root? if you are going to use unrevoked (doesn't work with hboot2.02) just open unrevoked without the phone connected and then point it to the amon-ra recovery.img you downloaded, up at the top its under file dropdown or somewhere up there then unrevoked will flash ra for you automatically
fastboot is an option under HBOOT(power of your phone power on pressing power and volume down it is the first option)
terminal app is an app that is like the command prompt in windows on your phone a good one is terminal emulator
adb is is Android debug bridge like stated above. it is for people that like to use the cmd(command prompt) on your computer to do things with your phone like pulling apps off your phone, pushing them on your phone, and other like this most of this can be done using root explorer to place the flies or making a flashable zip. another thing adb is used for is getting your phone out of boot loops that you cant any other way. never had to do this so dont know how. i think adb and adb shell are basically the same thing not 100 on that one. here are some likes about adb for you
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
as for using terrel_b's suggestion this is a good suggestion. using rom manager you can flash your recovery this way it is very easy way to do this it is free there is a paid version of rom manager it is for using extra things on clockwork recovery, so basically the only thing you will use rom manager for, if you decide to use it, is flashinf your recovery unless you use clockwork. the reason clockwork is not used more is that there are questions if it wipes everything properly and if something is not wiped right it can cause lots of problems. of and just in case you are wonndering rom manager is an app you can get off the market.
hope this helps and if you need anything else ask
ifly4vamerica said:
How are you going to root? if you are going to use unrevoked (doesn't work with hboot2.02) just open unrevoked without the phone connected and then point it to the amon-ra recovery.img you downloaded, up at the top its under file dropdown or somewhere up there then unrevoked will flash ra for you automatically
Click to expand...
Click to collapse
Im using unrevoked... I am still running hboot 0.97.0000... thanks for the input, I appriciate it!!
J
roscoenr said:
fastboot is an option under HBOOT(power of your phone power on pressing power and volume down it is the first option)
terminal app is an app that is like the command prompt in windows on your phone a good one is terminal emulator
adb is is Android debug bridge like stated above. it is for people that like to use the cmd(command prompt) on your computer to do things with your phone like pulling apps off your phone, pushing them on your phone, and other like this most of this can be done using root explorer to place the flies or making a flashable zip. another thing adb is used for is getting your phone out of boot loops that you cant any other way. never had to do this so dont know how. i think adb and adb shell are basically the same thing not 100 on that one. here are some likes about adb for you
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
http://www.gadgetsdna.com/android-terminal-adb-shell-command-list/1168/
as for using terrel_b's suggestion this is a good suggestion. using rom manager you can flash your recovery this way it is very easy way to do this it is free there is a paid version of rom manager it is for using extra things on clockwork recovery, so basically the only thing you will use rom manager for, if you decide to use it, is flashinf your recovery unless you use clockwork. the reason clockwork is not used more is that there are questions if it wipes everything properly and if something is not wiped right it can cause lots of problems. of and just in case you are wonndering rom manager is an app you can get off the market.
hope this helps and if you need anything else ask
Click to expand...
Click to collapse
Very helpful info - thanks!! I have already DL'd ROM Manger Pro...
Okay - another question, can i place the amon-ra recovery on the SD card BEFORE i root the phone or should I do that AFTER I root the phone? Just curious, I dont even know if it matters one way or the other... Just want to be sure before I do it...
Okay - I ROOTed using unrEVOked3.... Success! I do have a question though - I clicked on the superuser icon and nothing comes up?!? Is that right? I thought it was an app that gave you all kinds of stuff?? I guess I could have misunderstood the purpose of "superuser" - Also, After ROOT, I have not installed a new ROM yet - does the 4G still work with the stock ROM? I clicked the 4G button and it still says 3G... anyway Im gonna flash the Amon-Ra recovery now...
JayStation3 said:
Okay - I ROOTed using unrEVOked3.... Success! I do have a question though - I clicked on the superuser icon and nothing comes up?!? Is that right? I thought it was an app that gave you all kinds of stuff?? I guess I could have misunderstood the purpose of "superuser" - Also, After ROOT, I have not installed a new ROM yet - does the 4G still work with the stock ROM? I clicked the 4G button and it still says 3G... anyway Im gonna flash the Amon-Ra recovery now...
Click to expand...
Click to collapse
Well superuser gives root permissions to new applications loaded on a rooted android 2.2 platform phone.
To load a new ROM, flash via first on recovery.
Hope that helps, sorry I was being in a bit of short there eariler but I edited my post right I hope, others can check too.
alekosy said:
Well superuser gives root permissions to new applications loaded on a rooted android 2.2 platform phone.
To load a new ROM, flash via first on recovery.
Hope that helps, sorry I was being in a bit of short there eariler but I edited my post right I hope, others can check too.
Click to expand...
Click to collapse
No - you were very helpful... I got it ROOTed, now I just want to change my recovery to amon-ra so I can use my 4G...
4G is not working now - so im assuming I need to flash a new recovery... I heard amon-ra does the trick...
JayStation3 said:
No - you were very helpful... I got it ROOTed, now I just want to change my recovery to amon-ra so I can use my 4G...
4G is not working now - so im assuming I need to flash a new recovery... I heard amon-ra does the trick...
Click to expand...
Click to collapse
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
alekosy said:
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
Click to expand...
Click to collapse
Everything is there, pretty much solid on the information. I hope it works out for you, if not don't RUSH and take your sweet old time browsing the forums for help. GL
Strange the wimax should still work did you reboot and try 4g again? Unrevoked isn't known to break wimax
sent from my EVO at the edge of hell
alekosy said:
Edited: http://forum.xda-developers.com/showthread.php?t=715525
see if that helps.
OR
Read this http://forum.xda-developers.com/showthread.php?t=705026
Click to expand...
Click to collapse
cool, I will read them and figure it all out... thanks for the info... i flashed amon ra last night, did a back up w/ TB... did a NAND back up through the recovery of the phone... Im just a little confused on the differant recoveries...
Jbcarrera said:
Strange the wimax should still work did you reboot and try 4g again? Unrevoked isn't known to break wimax
sent from my EVO at the edge of hell
Click to expand...
Click to collapse
I thought I did reboot at least once, when I was preforming the NAND back up - but Im rebooting now and I will test it out again...
I do not have great 4G signal here at my house, so that may be it as well... I will mess with it and see whats up through out the day and let you know tonight...
I have noticed that my touch screen doesnt seem as responsive as it was and the phone in general is kind of glichy...
Ok, my 4G is still working... I must not have had a strong enuf signal at my house for it to kick in... No I'm having problems getting tether to work... I started a new thread on that one though...
Sent from the MATRIX... while plugged into my EVO... using the XDA app... from a galaxy far-far away.......
Hello,
This is my first post, but I've been flashing ROMs for a couple years now. However, I think I just totally messed up. I've been searching around for a while now, but nothing with my exact problem, so here's my scenario...
For whatever reason, I went through formatting my Verizon Samsung Galaxy Nexus after a flash didn't go so well. I formatted the /sdcard and /system. I don't know why I did this.
Anyway, I can't do much with it as it is. It only starts up and is stuck on the Google boot screen. I can get into recovery, but it's not much use. When I try to "adb push" to /sdcard, it says that the file system is read-only, so I can't even stuff to install over there. And, it seems that since I've formatted /sdcard the "Fix Permissions" .sh file isn't there anymore. I was able to write my files to /system, but the option in ClockworkMod recovery is to install zip from sdcard.
I've even looked up how to leverage fastboot to get the job done, but it just sits there and says waiting for device.
I'm screwed, huh?
HALP!
It seems even with all those years flashing roms, there's plenty of space for improvement. Especially reading the stickies before messing with your device.
a) push to /data/media with adb while in recovery
b) fastboot can't push files like adb does, it's for flashing factory images or IMG files (recovery, kernel)
c) read this
http://forum.xda-developers.com/showthread.php?t=1812959
Sent from my i9250
bk201doesntexist said:
a) push to /data/media with adb while in recovery
b) fastboot can't push files like adb does, it's for flashing factory images or IMG files (recovery, kernel)
Sent from my i9250
Click to expand...
Click to collapse
Thanks for the reply...
I tried to do exactly that, because I came across something that said that the internal sdcard on the SGN is actually /data/media. However, I can't seem to push via adb while in recovery. I get "error: device not found"... My USB driver works fine otherwise, but maybe not so much in recovery. Do I need to fix my drivers? I've never tried to use adb in recovery before...
Read the thread i posted, the whole first post, I'm pretty sure you didn't read it.
There's instructions on how to set everything up. Stop being lazy and do something for yourself.
Sent from my i9250
bk201doesntexist said:
Read the thread i posted, the whole first post, I'm pretty sure you didn't read it.
There's instructions on how to set everything up. Stop being lazy and do something for yourself.
Sent from my i9250
Click to expand...
Click to collapse
I read some of it, but there wasn't really anything on there that popped out as being helpful at first glance. Anywho, I also reinstalled my drivers and adb worked in recovery, so I'll say "Thank You" for your suggestions. I am able to proceed and my nightmare is over.
I wasn't being lazy; I was trying to figure this whole thing out by/for myself, but thanks anyway... I guess...
No problem. Next time, read a few pages back before posting, this HAS been answered before.
Sent from my i9250
Most of my the question/topic was explained here.
@steadfasterX
Re the WiFi pls share also the boot logs (see LOS faq).
Click to expand...
Click to collapse
I couldn't pull a boot log from TWRP, I'd get "Sbin/sh: adb: not found". That output seems to be haunting a lot of my adb attempts, it appears when I try "adb sync" as well.
Ok the choose "format" data in twrp and try to boot first without your userdata backup into stock. Lemme know if that works.
Click to expand...
Click to collapse
I tried, I unfortunately get a solid wall of bootloop. I still have everything from my SALT backup in case anything may or may not be needed. I just had a though, could the problem be that this backup was from before I USUed my phone (I can't remember if I said that in the first place)?
emperordogma said:
Most of my the question/topic was explained here.
@steadfasterX
I couldn't pull a boot log from TWRP, I'd get "Sbin/sh: adb: not found". That output seems to be haunting a lot of my adb attempts, it appears when I try "adb sync" as well.
I tried, I unfortunately get a solid wall of bootloop. I still have everything from my SALT backup in case anything may or may not be needed. I just had a though, could the problem be that this backup was from before I USUed my phone (I can't remember if I said that in the first place)?
Click to expand...
Click to collapse
The confusing part is we talk about 2 different things here:
1) WiFi. This is related to LOS and so when asking for logs l always assume you're on LOS. TWRP must match the LOS version.
2) booting stock. To make TWRP work it must be the matching TWRP installed of your stock release. Is that the case? If not do that first.
So re stock. Its strange that it does not boot with formatted data. Could you also flash magisk here and then try to boot?
steadfasterX said:
The confusing part is we talk about 2 different things here:
1) WiFi. This is related to LOS and so when asking for logs l always assume you're on LOS. TWRP must match the LOS version.
2) booting stock. To make TWRP work it must be the matching TWRP installed of your stock release. Is that the case? If not do that first.
So re stock. Its strange that it does not boot with formatted data. Could you also flash magisk here and then try to boot?
Click to expand...
Click to collapse
1) I'll worry about the WiFi if/when I can get stock up and running. But I was/am using LOS 15.1 (here's the version "lineage-15.1-20210608-UNOFFICIAL-h812_usu"), and my TWRP was "twrp-3.4.0-PREVIEW-230_g4_O".
2) I downgraded my TWRP to "twrp-3.3.1-PREVIEW-196_g4_MM", and same result, I get to the LG screen and the notification light stays on, then nothing. When inputting these dd commands:
Code:
adb shell
dd if=/external_sd/boot.img of=/dev/block/bootdevice/by-name/boot bs=512
dd if=/external_sd/system.img of=/dev/block/bootdevice/by-name/system bs=4096
dd if=/external_sd/userdata.img of=/dev/block/bootdevice/by-name/userdata bs=4096
adb shell sync
When I put "adb shell sync" in I get "/sbin/sh: adb: not found"
I tried clearing the cache after I put it in, then tried formatting, as well as tried installing Magisk. And when mounting the data partition, everything seem to be there (hard to tell exactly since it's not the way I'm used to seeing it).
Edit: I just tried getting a boot log using:
Code:
adb pull /cache/debug/boot_lc_crash.txt
adb pull /cache/debug/boot_lc_full.txt
adb pull /cache/debug/boot_lc_kernel.txt
And the first one comes back with /sbin/sh: adb: not found
emperordogma said:
1) I'll worry about the WiFi if/when I can get stock up and running. But I was/am using LOS 15.1 (here's the version "lineage-15.1-20210608-UNOFFICIAL-h812_usu"), and my TWRP was "twrp-3.4.0-PREVIEW-230_g4_O".
2) I downgraded my TWRP to "twrp-3.3.1-PREVIEW-196_g4_MM", and same result, I get to the LG screen and the notification light stays on, then nothing. When inputting these dd commands:
Code:
adb shell
dd if=/external_sd/boot.img of=/dev/block/bootdevice/by-name/boot bs=512
dd if=/external_sd/system.img of=/dev/block/bootdevice/by-name/system bs=4096
dd if=/external_sd/userdata.img of=/dev/block/bootdevice/by-name/userdata bs=4096
adb shell sync
When I put "adb shell sync" in I get "/sbin/sh: adb: not found"
I tried clearing the cache after I put it in, then tried formatting, as well as tried installing Magisk. And when mounting the data partition, everything seem to be there (hard to tell exactly since it's not the way I'm used to seeing it).
Edit: I just tried getting a boot log using:
Code:
adb pull /cache/debug/boot_lc_crash.txt
adb pull /cache/debug/boot_lc_full.txt
adb pull /cache/debug/boot_lc_kernel.txt
And the first one comes back with /sbin/sh: adb: not found
Click to expand...
Click to collapse
Ok so first of all: adb shell sync must be executed from without the shell you're in. That wasn clear described. So in other words after the dd command you just need to write "sync". That's it. It will not give any output when finished.
So here the next steps:
Try to mount system in TWRP and browse with the file manager if there are any files in /system/apps .
Use bs=512 for all dd commands.
Share your stock boot img here.
What data do you need exactly btw? App data like settings etc? Or just specific files?
steadfasterX said:
Ok so first of all: adb shell sync must be executed from without the shell you're in. That wasn clear described. So in other words after the dd command you just need to write "sync". That's it. It will not give any output when finished.
So here the next steps:
Try to mount system in TWRP and browse with the file manager if there are any files in /system/apps .
Use bs=512 for all dd commands.
Share your stock boot img here.
What data do you need exactly btw? App data like settings etc? Or just specific files?
Click to expand...
Click to collapse
Ahhhh, I assumed everything I saw was in a "copy/paste" format so, I didn't think to even try to exclude the adb from it.
I was able to mount system, and browse apps, there was stuff in there.
I used the "bs=512" method, and it gave the same result. I'm starting to think I'm just boned honestly. I'll upload my boot.img here in a few (in case you see this before I do).
I was hoping I could back up my texts/call logs (I was able to salvage a few, but I'm missing about a months worth), properly backup WhatsApp, get my Nova settings, and make sure I'm not missing anything else (I had a list, but can't think of it now). And I was hoping by doing it, it would fix the annoying Wifi bug.
Edit 1: I don't think it's "bootlooping", because I read that you could boot into TWRP while it's doing it (if your timing is good), I tried and couldn't get into TWRP at all, it's "stone walling" at the LG screen.
Edit 2: My stock Boot.img
ok so .. the boot image you send is not from the STOCK ROM. That is from LOS it seems. Pls upload the stock one which you are trying to flash with dd
steadfasterX said:
ok so .. the boot image you send is not from the STOCK ROM. That is from LOS it seems. Pls upload the stock one which you are trying to flash with dd
Click to expand...
Click to collapse
Huh, I am not sure how that happened. I'm starting to wonder if after the first try with adb push if I was even using my Stock Boot.img, magisk must've messed with me (they said the recommend way to to patch a boot.img) and I got them mixed up? Or at least that's the only thing I can think of.
Anyways, this should be the right one. Boot.img
@steadfasterX
I was able to boot back to Stock using the correct boot.img, unfortunately I lost some very important WhatsApp texts because it had to "re-verify", but other than that, everything seems to be in order. My apologies for confusing us both with the wrong boot.img. When I was messing around with Magisk, I must've gotten the two confused. I won't know if the wifi is fixed in LOS until later (I have to wait a while before I can use WhatsApp again).
emperordogma said:
@steadfasterX
I was able to boot back to Stock using the correct boot.img, unfortunately I lost some very important WhatsApp texts because it had to "re-verify", but other than that, everything seems to be in order. My apologies for confusing us both with the wrong boot.img. When I was messing around with Magisk, I must've gotten the two confused. I won't know if the wifi is fixed in LOS until later (I have to wait a while before I can use WhatsApp again).
Click to expand...
Click to collapse
yea that was my assumption after seeing that wrong boot.img.. all users were able to boot STOCK this way so it was either a mistake or bad flash. glad you figured it out.
when your WiFi does not come back on LOS later attach the boot logs then.
cheers
steadfasterX said:
yea that was my assumption after seeing that wrong boot.img.. all users were able to boot STOCK this way so it was either a mistake or bad flash. glad you figured it out.
when your WiFi does not come back on LOS later attach the boot logs then.
cheers
Click to expand...
Click to collapse
Everything appears to be working fine now, including the WiFi (you were right about fixing it by going back to stock), which appears to be better than it was before! I decided to upgrade to Lineage 16, because you had just updated it recently so, best to stay where the active development is (or at least last update), in case anything goes wrong. Thank you so much for your assistance, sorry about mixing up the boot.imgs. And thank you continuing support for the G4 (in some capacity).
I also just found out my phone had "OEM Unlock" in the developer settings, so I don't think I needed to use USU (if I read about that tight), pretty annoyed with myself for not paying attention properly.
emperordogma said:
Everything appears to be working fine now, including the WiFi (you were right about fixing it by going back to stock), which appears to be better than it was before! I decided to upgrade to Lineage 16, because you had just updated it recently so, best to stay where the active development is (or at least last update), in case anything goes wrong. Thank you so much for your assistance, sorry about mixing up the boot.imgs. And thank you continuing support for the G4 (in some capacity).
I also just found out my phone had "OEM Unlock" in the developer settings, so I don't think I needed to use USU (if I read about that tight), pretty annoyed with myself for not paying attention properly.
Click to expand...
Click to collapse
If your device is not a h811 or h815 international(!) then this option in dev settings will just do.....nothing. If it would be THAT easy there were never the need for UsU so you did it all right
steadfasterX said:
If your device is not a h811 or h815 international(!) then this option in dev settings will just do.....nothing. If it would be THAT easy there were never the need for UsU so you did it all right
Click to expand...
Click to collapse
Then what the heck is the point of that button/switch??? I figured because mine was a frankenstien device that maybe almost all of them had it, or I just got "lucky".
emperordogma said:
Then what the heck is the point of that button/switch??? I figured because mine was a frankenstien device that maybe almost all of them had it, or I just got "lucky".
Click to expand...
Click to collapse
Its just there by mistake. Not by LG but the OEMs. The OEMs like verizon, etc are not doing a good job but that's not new..
Hey folks,
Last night I was editing a file located under "data/system/users/0/settings_ssaid.xml" and upon rebooting my phone, it's been stuck in a boot loop. I have an original copy saved in a different folder, but unable to access anything to replace it.
Is there any specific fastboot command I can run to swap the files (adb push, pull etc)? Only boot slot A is giving me an issue, and I was reading flashing system.img would be able to help, but I don't wanna do anything I'm unsure will wipe any of my data where I'd have to start over unless I've recovered some of that data first.
If I do have to flash any stock images, pls post the instructions for clarity.
Thanks in advance.
Assuming adb can actually access your device, while it's stuck in a boot loop (test this by running 'adb devices' and see if you receive a response)
You can run the following command to list all the files in your specific folder.
adb shell ls FILEPATH
Every file in your specific folder will be listed. You can then do the following to pull/push your file
adb pull FILEPATH
adb push FILENAME FILEPATH
Of course you need to place the file that you want to push in your ADB folder.
Mind though, that simply replacing your edited file with the backup might not solve your bootloop.
You can always look up available commands here
adb shell ls - Android ADB Shell Commands Manual
Morgrain said:
Assuming adb can actually access your device, while it's stuck in a boot loop (test this by running 'adb devices' and see if you receive a response)
Click to expand...
Click to collapse
Yes, I can access adb and my device while it's booting up, but once it reboots I lose connection. Unless I can interrupt the process I'd have to be very quick in my typing to copy files lol.
Even with the few seconds I have to type some commands to access the directory of the file I edited, I do get a permission denied error.
Would swapping to Slot B during boot allow me into the system, or even flashing the system.img file?
RetroTech07 said:
Yes, I can access adb and my device while it's booting up, but once it reboots I lose connection. Unless I can interrupt the process I'd have to be very quick in my typing to copy files lol.
Even with the few seconds I have to type some commands to access the directory of the file I edited, I do get a permission denied error.
Would swapping to Slot B during boot allow me into the system, or even flashing the system.img file?
Click to expand...
Click to collapse
No because your file is on /data.
The issue is that you can't push your file to /scard since (I guess) you can't even get beyond to the point where /sdcard is mounted.
So copying it from /sdcard will likely be too late in the boot process.
Pushing directly into /data does not work either as you would have to be root. In the old days you could run and in root mode but I'm not sure that is still possible.
Factory reset will work.
On devices with separate recovery partition it would be possible to change recovery to allow adb access to /data so then push old file via recovery... But I would not know how to do that on Pixel as recovery is s part of the boot partition.
So effectively, it's likely you're only solution is to do a full firmware flash along with wipe.
I would first try a full flash removing the -w to avoid the wipe. It may work.
TonikJDK said:
I would first try a full flash adding the -w to avoid the wipe. It may work.
Click to expand...
Click to collapse
Probably a typo, but I think you meant you need to "remove" the -w to avoid a wipe.
Lughnasadh said:
Probably a typo, but I think you meant you need to "remove" the -w to avoid a wipe.
Click to expand...
Click to collapse
Thank you! My post is fixed.
TonikJDK said:
I would first try a full flash removing the -w to avoid the wipe. It may work.
Click to expand...
Click to collapse
Ok, I'm rooted so to be sure I don't mess anything up, lol can you list the steps just as a precaution?
Obviously I'd be in fastboot / recovery mode, then perform a flash-all but remove the -w so as to not erase my data?
Once the system boots, all of my texts and setup should remain as is, or do I have to go and recover it?
Would I be able to install the OS again on the inactive slot to recover data, or does that not work that way?
RetroTech07 said:
Would I be able to install the OS again on the inactive slot to recover data, or does that not work that way?
Click to expand...
Click to collapse
Nope ... there is only 1 data partition, so even when you flash the OS to the inactive slot, it would still use the same data partition. Moreover, it is then likely to upgrade/convert some files on /data which might result in not being able to go to the previous version in the old slot.
RetroTech07 said:
Ok, I'm rooted so to be sure I don't mess anything up, lol can you list the steps just as a precaution?
Click to expand...
Click to collapse
See https://forum.xda-developers.com/t/...thout-wiping-data-and-retaining-root.4356065/
so, unfortunately doing a full flash without wiping data didn't work. I'm almost inclined to believe that if TWRP was available for the P6/P, that I could go and push the file I had saved back into the directory of where it was and save myself from this mess.
I'm kicking myself because I'm usually backing up my data before I modify any system files, but this one time I hadn't done so and I had Google's backup turned off at the time, so I'm gonna have to lose some text messages over the last few days with some folks I enjoy speaking to. I do have some saved from late last week, but nothing from the weekend up until now.
As you said you can access ADB while booting, why not push/remove/replace the file while booting, even if this takes multiple boots to perform all commands, it should work assuming you can also use SU, if you can't, none of the below will work.
Code:
adb push <backup file location> /sdcard
adb shell
su
rm data/system/users/0/settings_ssaid.xml
cp /sdcard/settings_ssaid.xml /data/system/users/0/
chmod 600 data/system/users/0/settings_ssaid.xml
I don't know why it's affecting your boot though, there's a .fallback file that the system should fall back to when the system notes that this file is corrupt.
If the above doesn't work, and you could try:
Code:
adb shell
su
rm data/system/users/0/settings_ssaid.xml
cp /data/system/users/0/settings_ssaid.xml.fallback /data/system/users/0/settings_ssaid.xml
If that doesn't work, try:
Code:
adb shell
su
rm data/system/users/0/settings_ssaid.xml
And reboot, but again, I don't know why you're bootlooping from this, that file shouldn't be integral to booting.
Also, if you need to back up your data, why not just boot to boot_b, if it's not causing you issues? You really shouldn't have to reset your device to fix one problem - you could do a /data & /sdcard pull while booted to boot_b, or just run something like Titanium & SMS backup/restore.
DanielF50 said:
As you said you can access ADB while booting, why not push/remove/replace the file while booting, even if this takes multiple boots to perform all commands, it should work assuming you can also use SU, if you can't, none of the below will work.
Code:
adb push <backup file location> /sdcard
adb shell
su
rm data/system/users/0/settings_ssaid.xml
cp /sdcard/settings_ssaid.xml /data/system/users/0/
chmod 600 data/system/users/0/settings_ssaid.xml
I don't know why it's affecting your boot though, there's a .fallback file that the system should fall back to when the system notes that this file is corrupt.
If the above doesn't work, and you could try:
Code:
adb shell
su
rm data/system/users/0/settings_ssaid.xml
cp /data/system/users/0/settings_ssaid.xml.fallback /data/system/users/0/settings_ssaid.xml
If that doesn't work, try:
Code:
adb shell
su
rm data/system/users/0/settings_ssaid.xml
And reboot, but again, I don't know why you're bootlooping from this, that file shouldn't be integral to booting.
Also, if you need to back up your data, why not just boot to boot_b, if it's not causing you issues? You really shouldn't have to reset your device to fix one problem - you could do a /data & /sdcard pull while booted to boot_b, or just run something like Titanium & SMS backup/restore.
Click to expand...
Click to collapse
I appreciate the help but I can't go back as I've already wiped everything minutes before you sent this. If I had the above commands sooner I would have loved to try, although I'm not really sure why this became an issue in the first place. I tried booting to slot B, using both patched and normal boot images but it wasn't working, unless I did something wrong.
All I remember is installing an app to edit UDID for individual apps that I've used in the past, but because it wasn't identifying root properly, to which I'm assuming is an Android 12 issue, I decided to follow instructions for manually editing such IDs in the file I edited in my OP.
After I rebooted, I remember the main system about to start and seeing the Google boot logo with a percentage # go all the way up to 90%, then that's where the boot loop started. My guess at this point is either the app or the file I edited caused an issue, because I did nothing else up until that point. What's odd, is that after I formatted the whole system and rebooted, I saw the same percentage appear on screen after installing the same app to see if that was the issue, but it booted fully just fine.
I was going to just keep fighting this and keep the phone the way it was until I could maybe fix everything, but figured there's nothing I could do at this point since trying a flash of everything failed. I was up until 5am last night and it's almost 4 am with me trying to fix this. I feel defeated and upset because I don't believe I had to wipe this in the first place, and could have likely saved all of my data. I didn't have Google's backup option turned on and hadn't backed up my text messages because I was dumb. I'm more upset with myself than the phone honestly.
RetroTech07 said:
I appreciate the help but I can't go back as I've already wiped everything minutes before you sent this. If I had the above commands sooner I would have loved to try, although I'm not really sure why this became an issue in the first place. I tried booting to slot B, using both patched and normal boot images but it wasn't working, unless I did something wrong.
All I remember is installing an app to edit UDID for individual apps that I've used in the past, but because it wasn't identifying root properly, to which I'm assuming is an Android 12 issue, I decided to follow instructions for manually editing such IDs in the file I edited in my OP.
After I rebooted, I remember the main system about to start and seeing the Google boot logo with a percentage # go all the way up to 90%, then that's where the boot loop started. My guess at this point is either the app or the file I edited caused an issue, because I did nothing else up until that point. What's odd, is that after I formatted the whole system and rebooted, I saw the same percentage appear on screen after installing the same app to see if that was the issue, but it booted fully just fine.
I was going to just keep fighting this and keep the phone the way it was until I could maybe fix everything, but figured there's nothing I could do at this point since trying a flash of everything failed. I was up until 5am last night and it's almost 4 am with me trying to fix this. I feel defeated and upset because I don't believe I had to wipe this in the first place, and could have likely saved all of my data. I didn't have Google's backup option turned on and hadn't backed up my text messages because I was dumb. I'm more upset with myself than the phone honestly.
Click to expand...
Click to collapse
Ah damn, I was too late!
The 90% thing sounds like the November Google Play services updated - mine updated yesterday and I got the same thing when I rebooted, maybe something between the two got corrupt.
Yeah, I get that, I've had more than my fair share of self inflicted (and not so self inflicted) problems that have lost me data but you live and you learn I suppose