Related
Hi guys. I am running stock ATT Tilt 2.
From the files in the Windows\StartUp folder
HTCStartUp - What does this program do? Important
MessageCSPTool - Does? Important?
PKG - Does? Important
poutlook - I assume it just loads the mail in the background so it loads and responds faster.
Question though,
On StartUp it runs NewBreak.exe, I want to dump that. How?
Also, it is running two programs for mail, one called "tmail.exe" and the other is the "poutlook.exe". Do I need both? What does tmail.exe do?
I'd also like to know what I can remove from startup. I have Tmous, and do not use Outlook to sync, I also do not use push email. I would like to remove anything that is not ABSOLUTELY necessary from startup. Some programs may have installed in startup, and I am perfectly happy just starting them manually when I need them, rather than having them start every time.
poutlook.ink
bttrayce.ink
delwmptempfolder.ink
htcstartup.ink
syncmanager.ink
instant forward.ink
pkg.ink
rungnangent.exe
ysrem.exe
Thank you in advance for your insight to this matter.
Try to move the files...
Try to move (cut / paste) one of the files in the startup folder ONE AT A TIME!! to a temporary folder (any place will do other than where it is now)
(these files are "links" or "'Shortcuts" to the real files in /Windows directory)
Make sure you have all your data backed up to a flash card or SD micro flash card or try the Microsoft "MyPhone" service... After all.. it's free. so if you end up with a phone that wont start up normally you can do a hard reset and the phone will revert back to factory clean install or what ever ROM you flashed into it. Then you can recover your stuff off of the MicroSD card or the MyPhone service.
1 make a new folder in the /windows/startup folder e.g. "temp" or "test"
2 tap and hold one of the files e.g. 'poutlook' - hold it untill you get the blue dots and then a menu.
3. select the "CUT" option from the menu
4. tap on the new folder you created to navigate into it, and then tap and hold untill you get the menu again, and then select "Paste"
5. do a soft reset and see what happens. Play around and see what is working and what is not working.
6. If nothing bad happens try another file until either you get the result you want OR all the files a gone, OR badness happens.
Most of these programs just run in the background and start services like bluetooth or Pocket Outlook so that they will start faster when you select them.
I removed Myfaves from the startup folder on my wing and it stopped My Faves from starting and gave me about 6MB of program memory back.
I never tried the others.
I just got my Touch Pro 2 so i'd be curious to see how you make out.
Good luck!
Hi all.
I've been lurking on the Kaiser forum for some time and have found a wealth of very useful info... Except when it comes to running Android via HaRET.
Yes, I know there have been a million questions. Yes, I have seen many of them inserted into what should be straight developer/bug threads. Even so, the "answer" to my issue doesn't work.
From "How to run Polymod’s AWESOME 2.1 Eclare Build and Updates":
Section 2 - Errors and FAQ's
===============================
#1 Failed to reach system.img on SD Card
If you see the error message below:
“Failed to reach system.img on SD Card” then you did not hold the button down correctly. You are seeing this because you missed, disabled or bypassed the install menu.
Click to expand...
Click to collapse
NOT TRUE. I have booted more than 20 times pressing/holding the center button at different times and with different intensities. No matter what I do, I get this blasted error message. Any solution other than the stock one listed above would be cause for hero-worship.
This error can have a number of causes, namely the file system, is the SD card formatted FAT32, ( some cards come formatted FAT16 as standard), or having the SD card set up incorrectly, for haret you need to have all files in the andboot folder.
Provided haret starts correctly, which it is since you cannot reach the post-install stage unless it is booting the kernel, then the only part of the procedure that can go wrong is the installer.
The only things I can think of that would cause the installer not to start is either the card itself, or problems with the andboot folder and/or the files inside.
The only advice I can give at the moment is to calmly start haret, watch the scrolling text until you get the pause, and the 'press d-pad to start installer' text.
At that point if you press the d-pad centre button, and hold it you will see '^@' on the screen, if you do not see the '^@' or see anything else then the installer cannot start, it will only respond to the correct key.
If you see anything else it is possible you have incorrectly set an option in default.txt file.
If all this still fails, then report back with anything you find, I may have some other ideas based on what you find out
+1 on zenitys answer and in addition you are using the correct basefiles to run haret?
Try using the screen as a giant keypad and pressing and holding the center of the screen.
EDIT: Scratch that... It only works as a keypad once the menu is up. Sorry.
that works?
Seriously?
I mean really?
No it bloody does not, ( lol, can't believe i actually tried it ).....
i had this problem and pulled my hair out, eventually i downloaded a different haret basefile and copied to my SD and bam it worked, sorry but i'm i soon after went to nand and erased the haret files so i don't have them anymore.
zenity: Yes, it is FAT32 and yes all files are in andboot. I do see a '^@' when I press the center button if I press it when prompted. If I press and hold as soon as I see Tux, I don't get that character pair. I see a different string of characters if I press one of the other buttons instead. I haven't modified the default.txt file in any way other than to re-name it from default-kaiser.txt.
I am using the files from a haretinstall.zip that I got directly from sourceforge Android HTC project (sourceforge.net/projects/androidhtc/files/... not allowed to post links <_<). The files were under the date 02-13-2010. I have since grabbed two other more current versions of haretinstall.zip and will try them after I post this. I am also using the most current androidinstall.tar and androidupdate.tar from sourceforge, though I have also tried Polyrithmic Eclair 2.1g's androidinstall.tgz.
Thanks all for the replies and I'll try those other haretinstall.zip's while waiting for any other replies.
maybe try a different sd card?
I couldn't get any nbh's to be read off of my 2gb patriot, but when i put in my 16gb sandisk the nbh's worked.
I know this is only marginally related lol, but it's worth a shot?
mr_fosi said:
zenity: Yes, it is FAT32 and yes all files are in andboot. I do see a '^@' when I press the center button if I press it when prompted. If I press and hold as soon as I see Tux, I don't get that character pair. I see a different string of characters if I press one of the other buttons instead. I haven't modified the default.txt file in any way other than to re-name it from default-kaiser.txt.
I am using the files from a haretinstall.zip that I got directly from sourceforge Android HTC project (sourceforge.net/projects/androidhtc/files/... not allowed to post links <_<). The files were under the date 02-13-2010. I have since grabbed two other more current versions of haretinstall.zip and will try them after I post this. I am also using the most current androidinstall.tar and androidupdate.tar from sourceforge, though I have also tried Polyrithmic Eclair 2.1g's androidinstall.tgz.
Thanks all for the replies and I'll try those other haretinstall.zip's while waiting for any other replies.
Click to expand...
Click to collapse
I do remember trying the 2/13 first and that is the one that holding the button did absolutely nothing, it was either 2/14 or 2/20 (those are in my browsing history) that did work for me. It was a "ta dah" moment when the install menu popped up.
deezy7 said:
maybe try a different sd card?
I couldn't get any nbh's to be read off of my 2gb patriot, but when i put in my 16gb sandisk the nbh's worked.
I know this is only marginally related lol, but it's worth a shot?
Click to expand...
Click to collapse
I doubt it, cause its reading the kernel if he is getting the error message. The error message about system.img is because an install hasn't been performed to create a system.img or data.img file on the sdcard.
Actually it's very related, android seems unusually sensitive to SD card issues that winmo simply ignores.
If you have another SD card available then try that, if not then all I can suggest at the moment is reformatting a couple of times, that worked for one of my 2Gb cards that simply would not recognise my NBH files no matter what I did.
An alternative might be to grab kalt_kaffe's zimage from here : http://forum.xda-developers.com/showthread.php?t=660158
this seems to be the best zImage for eclair at the moment. Just download it, put it in andboot with the rest of the haret files, make sure it's named correctly, ( it'll probably need you to delete the zImage file already there anyway, or overwrite if you use a card reader and windows).
Since you are getting the ^@ then the kernel is running properly, that actually only leaves the SD card, the reason you get the other character pair if you press to early is that with some zImages the keyboard may not be set up early enough, which is why I always wait for the pause, never failed me yet.
Maybe... Maybe...
Thanks again all.
It may well be the SD card but a more current set of HaRET basefiles did finally fix the center button issue. I have been able to get android installed but little else. I have a blank screen (with clock, battery and wifi in the top bar) but nothing else.
I'm going to blame this issue particular tar files I used and I will go back and try the Eclaire by Polyrithmic or the one by kallt_kaffe you linked. I didn't really want the Andriod HTC tar files but was using them in an attempt to minimize the variables causing my initial button issue.
If you are going to use polymod may I suggest the 2.1D download linked in my sig, it's only the install.tar, but is pretty stable, and is in fact what I use for my everyday android on my main kaiser.
Since you have a working set of haret files, simply replace the zImage with kalt_kaffe's zImage, replace the installer with poly's 2.1D and you should hopefully be good to go
I tried 2.1d and it locked during the post-install setup. I also tried kalt_kaffe's zImage with both 2.1g and it broke my wifi.
As such, I am back to using 2.1g with the kernel that was originally bundled with it... Even bluetooth seems to work. I can see my lappy but I haven't tried pairing yet. No microphone though as far as I can tell. It'll be awesome once the ethereal developers find a way to make the camera work.
At least now I have something new to play with. I'm eying Warm Donut b/c I like the look but I don't know if I want to undo the working install I have. Never know till you try, right?
I guess this is probably already well-known but my kaiser's camera works under Warm Donut. The pics aren't all that great but it does take them.
If anyone else stops by... I'm having audio problems. I'd had audio problems with all the different Android releases I've tried so far. The main problem is that there is no audio. No alerts, rings or media.
Any suggestions?
mr_fosi said:
If anyone else stops by... I'm having audio problems. I'd had audio problems with all the different Android releases I've tried so far. The main problem is that there is no audio. No alerts, rings or media.
Any suggestions?
Click to expand...
Click to collapse
The way I understand it, that can be affected by your radio firmware... The radio firmware I use without any problems for android is in my sig.
Please post which one you are using, too!
Good call! I hadn't considered my radio version though I have seen numerous posts suggesting that users upgrade... Or at least swap theirs out.
WM6 indicates that my radio version is 1.27.14.09.
Radio 1.27.14.09
Protocol 22.45.88.07h
ROM 1.62.00.00
I'll do a little reading and see if I can't figure out how to swap a new radio (probably the one you're using) in.
Ok that's one old radio, go here : http://forum.xda-developers.com/showthread.php?t=393182, get the 1.71.09.01 linked at the bottom of post #3, it's an nbh file, so just rename it to KAISimg.nbh, put it on SD and flash the same as the Nand nbh, it will not affect anything, just upgrades the radio.
I got the radio nbh and now I am working out how to use nand. Most everything I see is geared toward wiping windows to replace it with android. I don't want to do that yet so I'm trying to parse now to flash this nbh without jacking up my device or the windows that is currently on it.
I am currently having problems booting the haret file for XDandriod 2.2, i have checked and read with other forums looking for answer but nothing stood out.
When i fist downloaded Froyo 2.2 Blazn for my Tilt 2 it worked fine, even saved contacts and marketplace worked. But when I soft reset went back into windows and try to run it i got an error" cannot open script file \sd card\default.txt" I know there had been a lot of reports of this but nothing fit the description so I did a clean install to see the changes, worked fine the first time but then wouldn't boot up again after the first or second soft reset. I'm not sure what to do at this point, i don't want to have to soft reset every time i want to use my XDandriod interface.
TheImp0rt said:
I am currently having problems booting the haret file for XDandriod 2.2, i have checked and read with other forums looking for answer but nothing stood out.
When i fist downloaded Froyo 2.2 Blazn for my Tilt 2 it worked fine, even saved contacts and marketplace worked. But when I soft reset went back into windows and try to run it i got an error" cannot open script file \sd card\default.txt" I know there had been a lot of reports of this but nothing fit the description so I did a clean install to see the changes, worked fine the first time but then wouldn't boot up again after the first or second soft reset. I'm not sure what to do at this point, i don't want to have to soft reset every time i want to use my XDandriod interface.
Click to expand...
Click to collapse
The ONLY reason this happens is you don't have a valid startup.txt where you run haret.exe from. It can't be named startup.txt~ or anything like that. Not sure how you booted in the first place if you didn't have a proper startup...
Hmm, i renamed the file and when i got o Haret and click run nothing happens and since im using XDandroid i used the shortcut and it fails and says could not find startup.txt My startup folder is currently 0 bytes could something could of wipped the contents of it on the first startup?
This has been a reoccurring issue with the latest 2.2 build. My personal fix thus far has been to copy the startup.txt file to the root folder of my phone, then after each restart copied it back to the andboot folder.
Prerequiste
HTC Diamond
XDANDROID 2.2
PS3 3.41
Downloads
PSFREEDOM
Backup Manager (attached below)
Steps
Extract Psfreedom to root of your internal storage. Replace module and zimage file. if the name of new and old module is different just delete the old module
Connect phone in active sync mode with your pc
Run haret.exe
After you see boot animation you can disconnect your phone from pc
open terminal emulator in dev tools in android
run the following command -># Type "su", then "cd /sdcard", then "insmod psfreedom.ko"
make sure your ps3 is turned off( switched oof from the back in FAT model/ power cable is unplugged in SLIM model)
connect your phone to the usb port of your PS3
Turn the back switch on(FAT model) or plug in the power cable for Slim model
press power button and then immediately press eject button
Now in XMB there will be another option to install package files
put the manager.pkg in your fat32 formatted pen drive
Go to install package file and choose manager.pkg
After it is installed remove the pen drive
Insert the game you want to make a backup of.
Open backup manager and select the game and press backup.
After the backup has been made remove the game disk and put any other game disk.
choose the game of which you made backup and press load. it will send you to XMB
Now in front of the CD icon it will be the game you backed-up, not the game of which you inserted the disk.
Just run the game and ENJOY
NOTE: Those who get unknwown usb connected try 5-10 times. if the error continues.Format your internal storage and change your android build to 29.7.10 and and if it still doesnt work flash a new rom ( a fast one) ( dont know why but it worked for me) .
If you get the black screen then come back to XMB while running backup make sure you are removing your pen drive while making a backup. If it still doesnt work you can use the PSfreedom provided by Denial84 http://www.megaupload.com/?d=E2J6E55H
50+ views but no thanks?
Hi arjunking,
Firstly, Thanks!
I suspect a lot of people might be still struggling with this, like I am.
The first issue I have is this:
Step 1 "Extract Psfreedom to root of your internal storage. Replace module and zimage file"
I'm running XDANDROID.2.2.AOSP.29.7.10.RC2.1. Looking at the 'andboot' folder (where I run xdandroid from) the module file has a different name that the module file in the psfreedom package. Therefore, 'replace the module file' doesn't occur.
Does this indicate I'm using the wrong xdandroid version? Will it be a problem?
First of all, thanks for this guide, i answers some questions that most of us have, but not some of the other,
What build of xdandroid is reccomended?
10-80 said:
Hi arjunking,
Firstly, Thanks!
I suspect a lot of people might be still struggling with this, like I am.
The first issue I have is this:
Step 1 "Extract Psfreedom to root of your internal storage. Replace module and zimage file"
I'm running XDANDROID.2.2.AOSP.29.7.10.RC2.1. Looking at the 'andboot' folder (where I run xdandroid from) the module file has a different name that the module file in the psfreedom package. Therefore, 'replace the module file' doesn't occur.
Does this indicate I'm using the wrong xdandroid version? Will it be a problem?
Click to expand...
Click to collapse
Same thing I hate this!!!!!!!!!!!!!!!!
After the second boot of XDANDROID I can't boot, I get the error of not being able to find rootfs.img
I dont bother with the andboot folder?
this is all really hard,
I need
HELP!
10-80 said:
Hi arjunking,
Firstly, Thanks!
I suspect a lot of people might be still struggling with this, like I am.
The first issue I have is this:
Step 1 "Extract Psfreedom to root of your internal storage. Replace module and zimage file"
I'm running XDANDROID.2.2.AOSP.29.7.10.RC2.1. Looking at the 'andboot' folder (where I run xdandroid from) the module file has a different name that the module file in the psfreedom package. Therefore, 'replace the module file' doesn't occur.
Does this indicate I'm using the wrong xdandroid version? Will it be a problem?
Click to expand...
Click to collapse
Just put both files in internal storage, it works for me
thanks.
I have htc diam500.
I didn't use those crappy "andboot" folders.
I did EVERYTHING from the root. I also tried like 3 different versions of the psfreedom.ko file(one with bmdv* support) and some other one.
So I think it comes down to having the right psfreedom file and LUCK.
Also once you install the emulator(the thing you do after installing Xandroid) if you get a # and blank line than you've done it right. After that just plug it up to your ps3 when it's completly off.
noob_2010 said:
thanks.
I have htc diam500.
I didn't use those crappy "andboot" folders.
I did EVERYTHING from the root. I also tried like 3 different versions of the psfreedom.ko file(one with bmdv* support) and some other one.
So I think it comes down to having the right psfreedom file and LUCK.
Also once you install the emulator(the thing you do after installing Xandroid) if you get a # and blank line than you've done it right. After that just plug it up to your ps3 when it's completly off.
Click to expand...
Click to collapse
thanks for the help, but i still can't work out what i have done wrong!
this is so annoying, anyway, im sure i will work something out.
thanks
tom
OK, I'm almost there.
I should've tried it before I posted because apparently it doesn't matter if the modules file in the psfreedom package has a different name to the one in the xdandroid folder. I just deleted the original 'modules-2.6.27.46-01130-g0ac6681.tar' and copied over the one from the psfreedom package 'modules-2.6.27.46-01162-g741ab49-dirty.tar'
I've got to the point of starting my first backup.
This brings me to my next question:
1. When using the backup manager there is no option to backup to an external hard disk.
So how do I either:
a) backup to external hdd, or
b) move my backups from the internal hdd to an external hdd when they're done?
Update: OK, now that I've got a Fat32 formatted external hdd connected the 'backup manager' prompts me to backup to external hard disk
10-80 said:
OK, I'm almost there.
I should've tried it before I posted because apparently it doesn't matter if the modules file in the psfreedom package has a different name to the one in the xdandroid folder. I just deleted the original 'modules-2.6.27.46-01130-g0ac6681.tar' and copied over the one from the psfreedom package 'modules-2.6.27.46-01162-g741ab49-dirty.tar'
I've got to the point of starting my first backup.
This brings me to my next question:
1. When using the backup manager there is no option to backup to an external hard disk.
So how do I either:
a) backup to external hdd, or
b) move my backups from the internal hdd to an external hdd when they're done?
Click to expand...
Click to collapse
ok, so i did that right, what build of android are you using?
ummm I'm not sure on that. You would prob. have to google that. or just save it to your internal drive on the ps3 and when it's done see if they would let you do it is the only way I know.
tomascivinod said:
ok, so i did that right, what build of android are you using?
Click to expand...
Click to collapse
XDANDROID.2.2.AOSP.29.7.10.RC2.1
Also, if you run xdandroid from a location other than the root of internal storage, you need to make a corresponding change to step 6. In my case:
"cd /sdcard" becomes "cd /sdcard/andboot"
thanks for this...... working 100% with diam100 and ps3 with 3.41 firmware....
i have some problem with my diamond.
Yesterday the exploit didn't work for all day,this morning worked,and now doesn'work again.I hope in a new release.
10-80 said:
Hi arjunking,
Firstly, Thanks!
I suspect a lot of people might be still struggling with this, like I am.
The first issue I have is this:
Step 1 "Extract Psfreedom to root of your internal storage. Replace module and zimage file"
I'm running XDANDROID.2.2.AOSP.29.7.10.RC2.1. Looking at the 'andboot' folder (where I run xdandroid from) the module file has a different name that the module file in the psfreedom package. Therefore, 'replace the module file' doesn't occur.
Does this indicate I'm using the wrong xdandroid version? Will it be a problem?
Click to expand...
Click to collapse
Delete the old module already present. and let there just be the new one which is in in psfreedom. dont rename it
tomascivinod said:
First of all, thanks for this guide, i answers some questions that most of us have, but not some of the other,
What build of xdandroid is reccomended?
Same thing I hate this!!!!!!!!!!!!!!!!
After the second boot of XDANDROID I can't boot, I get the error of not being able to find rootfs.img
I dont bother with the andboot folder?
this is all really hard,
I need
HELP!
Click to expand...
Click to collapse
just download the android build 29.7.10 and extract it into root of your internal storage. not in any folder.
delete the module already present there and extract the new one from the psfreedom file.
Is there any way to run a script automatically on terminal start up that would basically run the 3 commands
su
cd sdcard
insmod psfreedom.ko
???
just being lazy really..!!LOL
edit.....
gscript lite works great and can place a shortcut on my desktop for running the script!!!
HaRET freezes after the vibrate.
Hello everyone,
I'm facing a problem that sometimes goes away. When i start HaRET, it freezes after it vibrates. What could be the problem? I'm using a HTC Touch Pro(not a diamond)
I Hope that someone has a solution for this problem.
that maybe cause of the android you are using. try reinstalling android using a new or different build. try the one in first post.
arjunking said:
that maybe cause of the android you are using. try reinstalling android using a new or different build. try the one in first post.
Click to expand...
Click to collapse
Formatted a 128mb micro sd card(i know it needs to be more for datastore), copied the files to the root of the card and run it. It looked like it was fixed, but it frozen after doing some things to load up android.
you need atleast 300mb of space for proper functioning of android.
it will kinda extract the sy.ext2 file which is of 90 mb so it takes all your space.
Hi. I just switched from 1 custom 4.3 rom to a different one and i did a factory reset. However once i rebooted, i noticed that all my internal SD content had gone into 0/0/0/0 etc. i kept clicking but eventually file explorer on widows just froze.
I went into ES file explorer on my phone and saw the content was behind 400 0's!!!!
Anyone have any idea what i could do to recover that info? every time i try copying the files ES explorer either crashes or says that it had copied the files when it hadnt.
Any help would be greatly apreciated. I'm at my wits end... :crying:
Thanks
Bro you need to use a file explorer from recovery. TWRP custom recovery has a built-in file explorer. That should do the trick
Sent from my SGH-T999 using Tapatalk
aussie88 said:
Hi. I just switched from 1 custom 4.3 rom to a different one and i did a factory reset. However once i rebooted, i noticed that all my internal SD content had gone into 0/0/0/0 etc. i kept clicking but eventually file explorer on widows just froze.
I went into ES file explorer on my phone and saw the content was behind 400 0's!!!!
Anyone have any idea what i could do to recover that info? every time i try copying the files ES explorer either crashes or says that it had copied the files when it hadnt.
Any help would be greatly apreciated. I'm at my wits end... :crying:
Thanks
Click to expand...
Click to collapse
Also, you should update your recovery as the more recent versions have fixed that problem. It doesn't happen each time you flash with the new versions.
fingolfin14 said:
Also, you should update your recovery as the more recent versions have fixed that problem. It doesn't happen each time you flash with the new versions.
Click to expand...
Click to collapse
Yep I figured that out the hard way lol. Already upgraded to the latest version of CWM to prevent it from happening anymore. Now to get the files out from down there... :banghead:
Sent from my SGH-T999 using xda app-developers app
On Windoz, You could troll and copy out every 10 deep or 20 deep back to surface and then continue. That'd be better than crashing Explorer.
Dos Prompt is more rugged. You could write a batch script there.
Perseus71 said:
On Windoz, You could troll and copy out every 10 deep or 20 deep back to surface and then continue. That'd be better than crashing Explorer.
Dos Prompt is more rugged. You could write a batch script there.
Click to expand...
Click to collapse
I saw that somewhere and tried that. Doesnt seem to be having any effect. Unless im doing it wrong...
I'm plugging my phone into my computer, accessing the phone section when it comes up, going about 20 0s deep and copying it back to the root. It either crashes my windows explorer, or doesnt seem to be doing anything(i think because its already disconnected itself. i tried making a new folder and it wouldn't let). what am i doing wrong?
PS. how would i access my phones internal SD from DOS?
thanks
Try ADB FileExplorer that should not time out on Windows. I have also tried Android File Manager with success. If that does not work, I will look up other options.
Well i tried android file manager. Im not 100% sure exactly how these programs work, but either way its saying i dont have root access. I do and i also have chainfires adbd insecure app which should give me full root access, but its still not working.
I looked at ADB FileExplorer too, but i didnt really get it and it kept saying it couldnt find my phone and something about an incorrect path.
With the Android File Manager, when it accesses the Phone over ADB, it will ask for Root once. If you don't click SuperSU warning in that time, the File Manager will give this error. Please read its thread carefully. I have connected over ADBWIRELESS and this just fine.
Perseus71 said:
With the Android File Manager, when it accesses the Phone over ADB, it will ask for Root once. If you don't click SuperSU warning in that time, the File Manager will give this error. Please read its thread carefully. I have connected over ADBWIRELESS and this just fine.
Click to expand...
Click to collapse
It never asked for root on my phone. I've tried all the changes and everything else that people have recommended, but im still not having any luck. I guess im too much of a noob for all this lol :crying:
Try Re-mounting internal SD in Recovery and then connect to PC.
nope, still no luck. Its still saying no root and no supersu request is coming up. I guess im missing something....
EDIT: I seem to somehow be "losing" root every time i try to connect to the android file manager. i open an app that requires root and it says i dont have root. I have to reboot my phone to get root to work again. It's weird though, because SuperSU opens fine...
open the last "zero" folder on your computer, drag everything into a folder on your computer desktop, let everything copy (do something else in the mean time), delete your phone memory, copy everything back to your cleared phone memory card
Lieu10ant said:
open the last "zero" folder on your computer, drag everything into a folder on your computer desktop, let everything copy (do something else in the mean time), delete your phone memory, copy everything back to your cleared phone memory card
Click to expand...
Click to collapse
If only it was that easy. its behind 400 nested folders. Windows cant go that deep. it freezes and FC's after about 200.
Im giving my phone in to get my power button repaired, so i guess ill ask the software tech there if he can figure it out. But thank you Perseus for all your help last night. :good:
I also have this problem guys, how do i update my custom recovery please?