Develop Bugs

XtremeGuard screen protector

I've used many different kinds of screen protectors in the past, and this time I tried XtremeGuard which I found on eBay. The cost was only $2.50 shipped. I must say hands down, this is the best screen protector I have used.
Other kinds I've used in the past were a thin hard plastic, kind of like a clear overhead sheet, but thinner and sticky on one side. These were not good IMO, because they make the touchscreens less sensitive and since they were hard, the edges would start to peel first and it would be all downhill from there.
The XtremeGuard is a more stretchy film material, kind of like 3M clear bra, or the kind you would find on a car. Its got a nice grippy rubber feel to it, which I actually like. Its "softer" so it sticks better to the screen.
I used a mild soapy water solution to put it on, and at first was kind of concerned with my results. Some areas were cloudy, there were some visible bubbles and when the screen was on it looked all rainbow cuz of the water trapped inside. After a couple days though, all the moisture evaporated, the cloudiness cleared up and all the bubbles were gone. I was left with a perfectly crystal clear screen that adhered all the way around, even on the edges. You would not be able to tell there was a screen protector on here (I have the OEM HTC silicone skin that covers the edges as well so you can't see the edge of the screen protector). The touchscreen works perfectly, and the screen protector does not interfere at all.
The screen protector was the exact size of the screen, perfect cut. Which is good, but makes it challenging to install, if you're off by a tiny bit, the screen protector will stick off the screen and that will be prone to peeling up later on. So take your time during the install to ensure its on there straight and perfectly. I started from the top where the speaker is and lined it up around those lines, and used a credit card to press it down and get as many bubbles out as I could. If this is your first time installing a screen protector, I would suggest getting 2-3 to make sure you get it right. At only $2.50ea, you really can't go wrong here. I'm 100% satisfied.
http://cgi.ebay.com/NEW-XtremeGUARD...ewItem&pt=PDA_Accessories&hash=item35a9e73eed
I would also like to note that I do not work for, or am in any way affiliated with XtremeGuard at all. I simply tried their product, and I liked it, so I'm leaving my feedback here.

I have tried it, but it is like a mm to long on top to bottom. And it was like 2mm to short in width.
That was my experience. Could be wrong for everyone.

I like mine, it fits perfectly. Doesn't stick over the edge and covers the whole thing. Mine was a perfect fit, not too long or short on any sides.
I'll try to get some pics up later when I get the chance

Man, I want to order it so bad, but with Otterbox covers around the corner, I think its a little waste of money.. :S

Any tackiness or stickiness with this protector? I'm currently using Phatom Skinz and love it, but I'm always looking around for something that may potentially be even better...especially with a price like this. How about orange peel?
thanks,
Alan

There is a very slight tackiness with this screen protector, but I actually like it. It gives a good feel when typing. It might interfere with pong or some other games where you need to move your finger really fast, but that doesn't really apply to me.
No orange peel, or any peeling at all for that matter.

The cloudiness really bugs me. The Zagg I had did not cloud like this one does.

The item from ebay is too pricier. This site offers products with much lower price and free shipping world wide. The 3 packed screen protector is much cheaper than 1 packed from ebay.
http://www.geartaker.com/product/3x...opers&utm_medium=minqing&utm_campaign=FA0070B
this 3 packed protector was once sold at $0.01 during its 2nd super deal.

Hey guys, I recently bought one of these off Amazon when I ordered my Otterbox case, it was only $2 so I figured I had nothing to lose. Here's my take on it.
http://forum.xda-developers.com/showthread.php?p=19109961#post19109961

I hate screen protectors!

I tried to use them, I really did. The first one was a zagg and it wasn't a very good experience. The screen was rubbery and got scratched up within 2 weeks. So I removed it and just left my seidio case on for a few months. No scratches at all. Now I just got an otterbox impact case and came w/ a nicer screen protector. I put it on, but the lint underneath the screen was driving me crazy. I tried cleaning it off and made it even worst! Is anyone else just rockin it with just a case? I'm done w/ screen protectors.

I used my phone for months without a screen protector until the OB Defender(waste) came out.
I do agree with you that the lint and dust is utterly frustrating. you almost need a clean-room with a surgeon to get the damn thing on right. I can't remember who suggested it, but they said if you take your phone into the bathroom after a good, hot shower, the moisture in the air will keep dust from floating around and you'll get a real clean protector.
i will tell you this, like i said, i rocked my phone for months without any protection. then one day i slid it into the same pocket as my car keys and received a nice long scratch along the length of the phone.

I use the otterbox one and I love it. You really can't tell that there is even a screen protector on the phone. You just gotta be very careful when you put it on. I have gotten really good at it, mine is perfect- not a bubble, spec of dust, scratch, etc...

Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.

Wish I posted here first before applying the screen protector. I'll just have to baby it for now.

If you are going to use one of the ones made with the military grade polymer, bodyguardz is one of the better ones. It doesn't have the orange peel feel to it and they have a dry apply version.

I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.

spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
I started using them and love them. IMO one if not the best out.
You just have to take your time. You cant tell mine is on.. I have used the anti fingerprint anf liked it a lot, but im using clear now and love it.... I wont go to the wet apply again.
Sent from my PC36100 using Tapatalk

I hate the glass. I like the plasticy rubbery feel of zagg. My hand can slide and there's no smudges or prints on. Amaxing
A drop of Chuck Norris's semen was placed on the IPhone. We now have the Htc Evo.

Just FYI, I found a screen protector that I swear buy. It feels like glass, like the original screen. I dont know how scratch resistant it is but after a few months I'm still scratch free. Also I put one on my wifes phone. They come in a three pack off Amazon for $7 and some change shipped. It's worth giving a shot. Here's the link- http://www.amazon.com/gp/product/B003T1WI02/ref=oss_product

mob87 said:
I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.
Click to expand...
Click to collapse
That's pretty innovative! I'll remember the tape trick next time. Thanks

I like Zagg InvisibleShield on my EVO. I had to order a replacement since I messed mine up with attempting to put on the front of a DecalGirl skin (pain in the butt).
I know I would have a hard time doing it myself so I had Best Buy install the last one and probably do my replacement. Yeah, they charge $8 but both times on my EVO and on my father's new android upgrade were perfect. No air bubbles, no trapped dust, dirt, and grim under the screen protector.

Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.

jedwardmiller said:
Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.
Click to expand...
Click to collapse
Are there scratches on ur screen protector? That's the other thing that drives me crazy.

I personally have to have a screen protector mainly due to my job . I work in the service department of a heavy equippment dealership . Besides being around dust and dirt and parts being ground down there is no telling what my fingers will pick up . I went with no protector at first and thats when I got my first two scratches . Had the invisible shield installed and scratches got covered up . Point of the story is , depending on your field of work and what you are exposing the phone to pretty much determines how well your screen is gonna remain scratch free . One thing that does irritate me to some extent . I had a Blackberry Storm that remained scratch free and never had a screen protector on it .

spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
Going to give my vote to the Steinheil too. First off, I started out with a Zagg but could not stand the rubbery feel. In addition, I also use my EVO as a music player when I work out (I have an armband case that has a plastic cover on it) and every time I pulled the EVO out of the case after the workout, it would pull the Zagg cover off. PAIN IN THE *SS! I got so tired of it happening, the last time I just crumpled up the Zagg and tossed it in the trash. At that point, I was ready to go with a NAKED screen but had to remind myself that I was on my second EVO. The screen on my first got scratched 3 days after I brought it home (Don't even know how... with a 20-month old running around at home, could have been anything).
Now, going back to the Steinheil - I read reviews of it on Amazon and everyone raved. It was somewhat affordable so I thought, why not. After applying it, I have to say it's pretty awesome. Does it feel like glass? Not in my opinion - it feels "silky" but not SMOOTH like glass (does that make sense?) More importantly, it doesn't feel like rubber like the Zagg. And a fringe benefit, it does a great job of keeping off the fingerprints! And how about working out? I've used put in the armband case now 4X and it hasn't come off once. With the Zagg, I've had to reapply it 4 times!
So, my vote is for the Steinheil too... (BTW, they give you two in a case so you can try and find someone to split the costs with you if cost is an issue).

Boxwave screen protectors are the way to go. The crystal ones are awesome
Sent from my PC36100 using XDA App

I buy the cheap ones from China on ebay and they seem to work fine. I usually just buy them in bulk for like $10 and stash them. I replace them every couple of months once they get scratched. I swear by the shower method in the bathroom, always have a clean application.

I initially had a zagg screen protector but it was GARBAGE. I ripped it off after 2 days of having it. I ended up getting a privacy screen protector off eBay for $3.00 and have had it since. I do miss the crisp clarity of the Evo screen but it has proved useful and has worked much better than that zagg crap.

I got a Zagg as soon as I got my Evo. I had used them on other devices (G1, my brief stint with an iphone, my Moment). Some people don't like the orange peel effect, and say it feels tacky, but it doesn't bother me (I don't even notice the orange peel effect). I have had it since August of last year, since the Evo was so hard to come by for the longest time lol. I have no scratches, and no bubbles. No peeling of the sides, except one when I put my Seidio case on initially, but it smoothed back out. I had Best Buy install it for me this go around, and I couldn't be happier. I have had it like I said, since August, with heavy use, and it stays in my pocket. It still looks as good as the day I got it

Screen Protectors

any tips or tricks to putting the screen protectors on without getting bubbles or dust and lint sticking to adhesive side of protector?

If and when you place your screen protector and notice a finger print or lint, you can repair it. I use clear packing tape, cutting two strips about 1/2" wide. Place one on the top near (but not over) the area you are working with. This is used to lift the protector so you can get under it to where the problem is. Then slip the second strip under the protector, facing up or down depending if the problem it on the protector or the glass. I do it one way then the other for good measure. Once the tape is in place, lower the protector, press on the area, raise the protector, remove the piece of tape under the protector, then lower the protector to see if the blemish is gone.
Repeat where needed. Remove the piece of tape on the top by holding the protector beside the tape, and pulling the tape off the top.
This will remove fingerprints underneath the protector whether it is on the protector or the glass. It will also remove dust, fibers, etc.
It is entirely possible to place the screen protector where it is straight and without anything caught underneath, but I have used this method many times.
If you would like to see the process, search Youtube for "removing lint from under screen protectors".

I'm lazy -- I took mine to BestBuy and had them do it. It cost around $12, but they did the job right. I always seem to screw up when putting them on myself.

there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant

danij3l said:
there is no need to "protect" the screen
http://www.youtube.com/watch?v=ivxlsNLi-9s
only good if protector is fingerprint resistant
Click to expand...
Click to collapse
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.

I purchased the Skinomi from Amazon. It did not really help with fingerprints like I had planned, nor did it look very good on the screen - contrary to the Skinomi I have on my iPhone 4...

My fire got a light scratch on it in about a week. Never dropped, lived in its case, babied.
Get a screen protector.
(I am anal and hate even the smallest defect. It was indeed a small scratch only noticeable in certain light, but was a scratch.)

brett10 said:
I agree, it makes no sense to use a screen protector on something that has Gorilla Glass like the KF does, other than fingerprints or possibly a privacy screen protector.
Click to expand...
Click to collapse
I disagree. I have Gorilla Glass on my Samsung Epic 4g which survived the same type of 'demonstrations' showed in that video. Not wanting to impact the beauty of the screen (touted as one of its primary features when the phone came out), I left mine unprotected. However, after less than a year of use, there are still a significant number of scratches on it, and even one 'chunk' missing that is visible from all angles.
Came here to see if anyone recommended a specific brand over another. While the anti-glare screens sound nice, I have also read that it impacts viewing in a negative way - sounds like something I don't want for a device designed for reading. Therefore I figured I'd stick with a clear protector, but was looking for reviews.

I've always loved and used the SGP Steinheil Ultra Crystal.
[I'll add link later]
The anti-fingerprint ones they sell are junk. They really muck up the screen. But the ultra-crystals are great and provide another layer of protection. I haven't installed mine on my Fire yet, but I will once I get around to it.
Though Gorilla Glass is amazing stuff, it is not scratch-proof. I'll continue using screen protectors regardless of what type of glass.

Interesting. I have a 2 year old Incredible with a perfect screen and never used a screen protector. I must be the most careful person on earth.

.46caliber said:
The anti-fingerprint ones they sell are junk. They really muck up the screen.
Click to expand...
Click to collapse
Agree and disagree. While it does hinder the quality a tiny tiny bit, I personally love the feel of the matte surface while reading a book. That, combined with anti-glare, make the clear protectors utterly useless to me. If I'm reading / watching anything, I certainly don't want to have to tilt the device to get rid of glare to see the screen clearly.
I bought the Acase matte screen protectors and absolutely recommend them to anyone. 3 pack for $12.99 shipped on Amazon. (Girlfriend loves them too)

I have an XO Skin on my Nexus and love the look of it. You really can barely tell its there and it helps a ton with the finger prints. They make one for the Fire as well: http://xoskins.com/amazon-kindle-fire-screen-protector
Be aware that this is a wet applied protector. I find the best way to apply them is the steam up the bathroom really well for a few minutes, then turn the water off for a few minutes to let any dust in the room settle. Then do a really good wipe down of the screen with a non lint towel and blow it completely clean with compressed air.
When applying the protector, use a lot of the application liquid, on the protector and your fingers.

I just installed a Skinomi protector. Still waiting for it to dry and all, but as far as I can see I removed pretty much all of the bubbles. It was around 9 bucks shipped, came well packaged with clear instructions and a lifetime warranty. As long as it the picture quality isn't disturbed, I think it's going to be a winner.
I do want to try one of those matte protectors now though...

After dealing with cheap screen protectors I ordered a couple different well reviewed protectors.
I got the armorsuit militaryshield.
It installed great, but had to apply it wet (which i don't like) and let sit for 12 hours.
It turned out very nice, you really couldn't tell it was there besides very minor screen distortion. I really didn't like how it felt, a little sticky.
I had to rma that kindle and couldn't save the shield.
So I got a greatshield ezseal
If you're looking for a protector this is the one to get.
Best protector Ive ever used.
Its basically just like the moshi ivisor for ipad.
It doesn't stick to the screen, the adhesive is on the outer edges and it basically lies on the screen -so no bubbles. you can even take it off and wash it.

I tried the Acase matte screen protectors on Amazon and they looked awful. They mute the color palette and give everything a fuzzy look. Tried the Acase clear screen protectors instead and they worked out fine. Can't see the fingerprints and the screen still looks good.

yeah matte will make it a bit fuzzy/greasy looking
the ezshield is matte

Got this:
http://www.amazon.com/gp/product/B000ALDUFG/ref=oh_o00_s00_i00_details
BoxWave Amazon Kindle Fire ClearTouch Anti-Glare Screen Protector
I really like how it fits, it really make the display look better.
Don't really care about scratches, but the reflections on the KF can be pretty annoying outside.
It's not really anti-Fingerprint but it's way more easy to clean.
It's also reusable.

I thk a screen protector is ideal if your banging it around or throwing stuff of it but other than theres no reason to really.
ive only had i protector on 1 one the phones ive had, all the rest of the stuff I dont have any SP on them.
I have never had any prob with the screen getting scratched.
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
If I could find something that would let me see the screen in the sun now that would be worth it. LOL

Is it making the screen use better outside then? And what about the use inside?
Sent from my MIUI.us Sensation 4G using XDA App

I'd definitely speak against screen protectors; I purchased a highly rated myGear one with my Fire and noticed that though fingerprints didn't seem to appear as easily, they were almost impossible to wipe off completely. It also noticeably detracts from what is such a good screen.

Nexus 5 Screen Protector Warning

I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.

The xtremeguard screen protectors are really good, and they can be found for under $2.

mprasolov said:
I just thought I should share a valuable lesson: DON'T BUY CHEAP SCREEN PROTECTORS!
I have been fine in the past with cheap screen protectors from eBay. They got the job done, and they were only a dollar or two. And you got six of them.
Anticipating the arrival of my N5, I bought a Spigen Neo-Hybrid case (Which is excellent), and some cheap screen protectors for $2. (12 to be exact)
http://www.ebay.com/itm/231089059032?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I bought a bunch because that gives ample headroom if you mess up a few times.
I try to install the first one, and it ends up with bubbles near the cutouts for the speaker and camera. Okay, I'll just try another one.
I've gone through six of them, and they all have the same bubble problem near the cutouts.
I ended up buying higher-end screen protectors: http://www.amazon.com/gp/product/B00EV97UD6/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I'll be sure to report on those when they arrive.
But the lesson is to be cautious with cheap screen protectors.
Click to expand...
Click to collapse
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.

BigOkie said:
I've got some of the iSmooth protectors and they are quite good...once I properly installed them. Dry apply are a little tricky but there are enough tutorials and videos to help. I also have the Neo Hybrid and I'm quite happy with it.
Click to expand...
Click to collapse
I guess I lucked out with my choice of screen protector!

Not necessarily. I bought these SAMAR crystal clear screen protectors, managed to apply one without getting any dust or air bubbles. It has all the cutouts, the fit is good, and it is quite smooth when swiping, very happy with it so far. To top it all off it is dirt cheap and you get 6 protectors all with cleaning cloths! I've read others on here who have been happy with this brand too. Would definitely recommend.

use a drop of water when u install. it'll help take out bubbles.
also you can reapply these, just rinse in soap water then water, then shake off excess and apply. squeegee out the water - should be next to nothing.

ktamondo said:
The xtremeguard screen protectors are really good, and they can be found for under $2.
Click to expand...
Click to collapse
True. And even with that. I got one first and tested before I got backups.

I use an IQshield screen protector and it's nothing short of pure awesome. No bubbles at all, and it's so smooth and dried hard. It feels like glass.

You get what you pay for. I bought the spiegen Crystal for 10 bucks and they went on perfect and looked perfect and felt pretty good to you cant even tell its on unless you look at the earpiece closely. But there's always better! I just recently bought a Nillkin Glass screen protector with 9h hardness and olephobic with rounded edges and its gonna be getting here in a week or so and that should be way better than a cheap or high quality screen protector!

This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
second, and heres the silly part: I make sure the screen is completely wiped, and blow on the screen itself with DRY LIPS as im applying the screen protector face down. This blows off any dust that may settle between the time you apply the screen, and make sure lips are dry as to not blow moisture onto the screen.
There really isn't any fool proof method for applying screen protectors without dust, but without some sort of clean box with a built in HEPA filtration system, this seems to work well for me 80-90% of the time, versus just applying like normal.

unvaluablespace said:
This sounds silly, but whenever I install a cheap screen protector, I do two things: first, i make sure the side that's going to be applied to the screen is FACE DOWN. Never face it up, under any circumstances. if I do, its before removing from packaging. I even remove the adhesive that protects the protector itself, with the screen protector face down. this doesn't give a chance for dust to sit on the bottom of the screen when facing up. Yes im sure any dust flying around will still find a way to stick, but this reduces the chances. Plus, you make sure you are applying in a clean environment anyway. I usually vaccum the house (or area at least) prior to applying, and give the dust time to settle afterwards.
.
Click to expand...
Click to collapse
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.

Caelrie said:
You can skip all the surgical-precision vacuuming if you do the application in the bathroom. Turn on the shower, hot as it'll go. Leave it run for 5-10 minutes til the bathroom is steamy. That knocks all the dust out of the air.
Then you can apply your screen protector in peace.
Click to expand...
Click to collapse
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol

The moisture will get out over time. Its just like having windows tinted
Sent from my Nexus 5 using Tapatalk

unvaluablespace said:
but wouldn't that cause moisture in the air? I could see that getting in between the screen during application. I bought a ton of screen protectors like OP though, so I'll have to give this idea a shot lol
Click to expand...
Click to collapse
It doesn't matter. Even dry-applied screen protectors go on better this way, and any moisture completely dries out quickly anyway.

Spend a few hundred dollars on a phone and then buy the cheapest cases and screen protectors you can? Doesn't make sense.
I'll pay the extra $8 for a Spigen screen protector and a quality case that match the quality of my Nexus.
Sent from my Nexus 5 using Tapatalk

Spigen could've tried a bit harder and made all the cutouts. Even the temporary screen protector that comes with the phone has those. I think most screen protectors will be similar at the $1+ range but you can't expect much from ones that cost $0.25.

xtremeguards didn't have bubbles for me. Buying 6 of the same screen protectors and then saying all of them have problems doesn't make sense.

I'm assuming the OP means the bubbles are from the edge of the cutouts not sticking down which is a common issue with cheap screen protectors.
the cutouts are not made well so the screen protector itself is warped at the cutouts for the speakers etc so its not flat and does not stick down creating bubbles there.

Just install in steamy bathroom. The steam prevents dust from floating in the air.
Sent from my Nexus 7 using XDA Premium HD app

I got this Nillkin one: http://dx.com/p/277084. I only had one. Applied by using the "hinge" method. Went perfectly. Cutouts are perfect and bubbles are removed very easy (easier than other screen protectors I've had).
I used a little wet cloth to make my screen wet and to remove dust. At first it feels very rubbery, but after using it for a day or even less, it feels just like the glass!

[anit-finger print] Oleophobic coating kit.

Didn't see anyone else talking about this on XDA. I though I would post my experience.
****This Product IS AMAZING*****
What is it?
Your touch screen comes with Gorilla Glass, which is great. It has an oleophobic coating on the screen that repels oils from your fingers, from your face. It is great. It also gives the screen that smooth finger sliding lower co-efficient of friction. That new phone screen feeling that I just love when I get a new phone. The problem is that it wears off after some time and you will notice after having the phone for a few months that the screen starts smudging and you start wiping the screen more and more to make it look clean. This drives me crazy and I can honestly admit that I have in the past purchased a new phone just so I could get that "New Screen Feeling". I once even traded in my Galaxy S2 used for a new S2 and spent $100 just to get the "New Screen Feeling".
Am I crazy?
Maybe but I am sure I am not the only one who loves a new screen. I absolutely hate screen protector with a passion, and I have tried multiple different protectors during my smart phone era but none did it for me except the ones that are made from tempered glass, but they suffer from the same fate of the coating wearing off and they are more susceptible to scratching then the stock screen.
So the solution?
This coating can be reapplied for cheap. There are a few different brands that I have come across. I used a brand called Proteger ordered on eBay from Japan. Other brands I have seen are Fusso and Dynaflo LIQUID-ARMOR. It appears that they are all manufactured in Japan. Most bottles are between $15 - $20.
The instructions say to use 10 - 15 drops on the screen. This is not needed and WAY TOO MUCH. You can put 4 - 5 drops on your screen per coat. Best to do 4 coats. This is how I applied it.
- clean first with supplied micro fibre cloth
- 5 drops on screen
- rub with one finger covering the whole screen. I kept rubbing until it was almost completely dry.
- once it is dry the screen is very hazy. Use a clean rag or paper towel to wipe it off. Keep turning the rag to a clean dry spot until all haze is gone.
- repeat 3 more times. It is suggested that you wait 8 hours to allow each coat to cure. I only waited 10 minutes and got great results, but tonight I will allow it 8 hours while I sleep to cure another coat.
Results.
You will notice immediately that the screen feels like new. Even after first coat, but it improves with every coat. The more coats the more slick the screen is.
******Here is the best part*******
I noticed with my Nexus 5 and previous phone that I would always get these micro scratches from regular use. This would drive some people to get screen protectors but I rather micro scratches then a disgusting looking screen protector. I never really got deep scratches or gouges but I would always get micro scratches that you could only see at certain angles. Here is the kicker. After applying the Proteger coating THESE SCRATCHES ARE GONE edit** the ok the scratches are not completely gone but they are much less noticeable. You really have to try to see them now. Obviously this product isn't some sort of magic solution, and the scratches don't disappear. I reckon that it fills the fine scratches kinda like wax on your car. Either way less noticeable is good enough for me.
I even tried it on my crappy beat up Blackberry work phone that has a pretty scratched up screen and all of the scratches are now gone except for 2 deep ones, but even they are less noticeable. AMAZING.
This is a great product and I will recommend it to everyone that I know. The bottle I bought was 10ml and I have done 2 phones and I can't even see the level go down in the bottle, this product should last a long time.
Anyone else use this stuff. Please leave your comments and reviews.

kevjef420 said:
but I rather micro scratches then a disgusting looking screen protector.
Click to expand...
Click to collapse
The Anker screen protectors I use are completely invisible, provided you apply them correctly. And to me, micro scratches are completely unacceptable for resale value purposes.
But good review, thanks for sharing, and to each their own.

Hmm maybe this would be great when applied on a cheap glass screan protector. A bit pricey, still.

Couldn't you just use RainX?

wolfen69 said:
The Anker screen protectors I use are completely invisible, provided you apply them correctly. And to me, micro scratches are completely unacceptable for resale value purposes.
Click to expand...
Click to collapse
Exactly my experience. No one believes me when I tell them my phone has a screen protector applied to it. Also they have a very good anti-smudge coating which stops a lot of finger prints and makes the screen very easy to clean. And if you want to have a screen that looks and feels always as new as possible, just stick a new protector on the phone. I got 3 ones from Anker for just 5€. Obviously this only works if you put the screen protector on as soon as you unbox your freshly bought phone. IMO this is the only real way to prevent micro-scratches or any other type of scratches to harm the actual screen. If you want to sell your phone you can take the screen protector off and it looks as new (granted you have been using a case so the rest of your phone isn't scratched etc either)

idbl_fanatic said:
Couldn't you just use RainX?
Click to expand...
Click to collapse
I haven't personally used RainX, but I have heard some people get good results from it. That said, I still believe a true oleophobic coating is a better idea. I don't know how to feel about the chemical properties of RainX. Maybe I'm just paranoid...

Always wondered if those things actually worked....might get one now. Thanks.

spiderflash said:
Exactly my experience. No one believes me when I tell them my phone has a screen protector applied to it. Also they have a very good anti-smudge coating which stops a lot of finger prints and makes the screen very easy to clean. And if you want to have a screen that looks and feels always as new as possible, just stick a new protector on the phone. I got 3 ones from Anker for just 5€. Obviously this only works if you put the screen protector on as soon as you unbox your freshly bought phone. IMO this is the only real way to prevent micro-scratches or any other type of scratches to harm the actual screen. If you want to sell your phone you can take the screen protector off and it looks as new (granted you have been using a case so the rest of your phone isn't scratched etc either)
Click to expand...
Click to collapse
wolfen69 said:
The Anker screen protectors I use are completely invisible, provided you apply them correctly. And to me, micro scratches are completely unacceptable for resale value purposes.
But good review, thanks for sharing, and to each their own.
Click to expand...
Click to collapse
U both talking about clear one or matte one?
Sent from my Nexus 5

atishey23 said:
U both talking about clear one or matte one?
Sent from my Nexus 5
Click to expand...
Click to collapse
A matte one wouldn't be invisible, right?

atishey23 said:
U both talking about clear one or matte one?
Sent from my Nexus 5
Click to expand...
Click to collapse
This one: http://www.amazon.de/gp/product/B00GHD28BS?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 (Yes it's german but you'll get it )

Thanks for this. I've had a hammerhead here for 26 months and just realized after buying another phone how bad the screen is regarding oil and smudges. It is rather ungodly and disgusting looking after taking a phone call. Based on searches the oleophobic coating is gone and I've been looking for a kit to reapply some of it at the very least. All the other products I've looked at do recommend multiple applications several hours apart.
Hopefully your fourteen month old review still holds true.

wolfen69 said:
The Anker screen protectors I use are completely invisible, provided you apply them correctly. And to me, micro scratches are completely unacceptable for resale value purposes.
But good review, thanks for sharing, and to each their own.
Click to expand...
Click to collapse
I agree, my experience with Tech Armor glass screen protectors has been good! The oleophobic coating is better than the one that comes with the nexus 5 and the scratch resistance is better. With a case on, you forget it is even there. I'd link you to it if i could!

Thanks for that information, I was only aware of Fusso before and that costs about £20 for 3ml, for about £30 you get 20ml of this stuff, way better value! I know what to get next time!

Hey, are you able to confirm if the Proteger coating actually works well. Read a few reviews and they all say it only last half a day while Fusso has great reviews. Don't want to waste £30 in it if it's no good.