Related
Hello all,
I am running stock rom rooted, version .5.
Due to some FCs happening I want to reinstall the stock rom.
How should I do it?
I don't really remember..
My phone was unbranded when I bought it.
Just running the RUU of the latest stock rom will do the work?
Or do I have to unroot it firstly?
Also, I have created a partition (ext3 - 512MB) at my sd (8GB - Class 6)..and I would like to be able to install apps there...I think it's called A2SD..
How can I do that?
I am taking a backup with TB and will backup contacts and anything else I need.
Should I take a nandroid backup too?
Additionally, in order to decide which rom would be better for me, is there any way to try custom roms, such as running a virtual android device at my pc?
Thank you for your time!
To use the A2SD+, you need to be rooted.
So you can either run a RUU (unroots your phone - then root it again) or search the Android developement for stock rooted ROMs with A2SD+.
If you choose the 2nd one, just boot into recovery wipe everything and then flash the ROM and then restore everything with Titanium.
Here's a stock rooted one:
http://forum.xda-developers.com/showthread.php?t=773997
Nandroid is always good, does not hurts when you have a backup
Thank you for your reply!
To start with, I haven't flashed through recovery any rom yet and haven't wiped data, and thus I am really inexperienced with these.
So I could download this ->"2.29.405.2/5 INIT.D ROM v3.0 | v3.1 - NEW!"? (The version .5) with init.d so that I can install the script of A2SD+ ("A2SD+ (1.4) - v3 compatible", right?
Do I have to flash a radio too?
I think I've read here somewhere that if the radio you're having is working properly then stick with it..If I wipe everything will I still have to install a radio?
So if I download this version what are the steps that I should follow?
1)Backup everything I need with TB and nandroid.
2)Copy the file into the root of sd.
3)Boot into recovery.
4)Wipe everything->wipe data/factory reset + wipe cache partition?
5)And then which option is to flash the rom? The "install zip from sdcard"?
After this procedure what else do I have to keep in mind?
What about this "Additionally, in order to decide which rom would be better for me, is there any way to try custom roms, such as running a virtual android device at my pc?" ?
Yes, that's the ROM, and you will be able to use A2SD+ with the init.d ROM.
Radio is not needed. Even if you wipe everything, it remains, because it is on a different partition. So wiping everything is safe, radio remains.
The steps are good, but before flashing ("install zip from SD Card") make sure you toggle verification off (it's in the same menu) - just in case.
Altough I strongly recommend to run through those custom ROMs, you'll not regret it (If you choose a stable one from a well known dev).
Yeah, the virtual android emulator. Wanted to write about it, but forgot it after searching for the ROM I Know it is possible, never tried it.
Here are some links, tough:
http://forum.xda-developers.com/showthread.php?t=525930
http://android.modaco.com/content/general-discussion/289928/testing-getting-an-emulator-up-and-running-a-full-rom-with-the-market-etc/
http://android.modaco.com/content/general-discussion/289928/testing-getting-an-emulator-up-and-running-a-full-rom-with-the-market-etc/
http://androidcommunity.com/forums/f4/test-rom-before-flash-31617/
I have flashed the one with the init.d..but into Settings > data I can only see as internal memory 120+MB...
TB though shows the free data on the sd extern..
How can I be sure what is correct? :S
Also I tried leedroid and cyanogen mod for a little..but leedroid was partially tranlsated to greek and cyanogen mod does not have sense which I seem to have got used to it..
Also, about the emulation..I was stuck at a part where I have to create a system.img file of the rom...:S
1. try to do the three wipes.. wipe factory settings, wipe cache, wipe dalvik and then reboot. perhaps you won't have fc's after that.
2. if you run a stock ruu again - you will lose root and s-on will return. this is the way to unroot essentially. check unlockr for details on that. you can use a universal ruu from htc to do that if you have to. but if you try 1. first, then you won't have to do this. i would suggest NOT unrooting just for a few fc's.
you will solve the problem by installing a different rom. now onto that issue about app2sd...
if you want app2sd.. i would suggest looking into data2sd. i'm on rcmix-hd or rcmix-s-w.1.1 and it's very nice. if you want to use data2sd you can also add this feature. pm me about that. one proviso, your sd-card must be a class-6 or higher to really enjoy data2sd ... i have a class-4 and the speed is not bad. but as the card becomes fragmented, i am sure the speed will suffer.
good luck enjoy your desire.
I have done the 2 wipes except the dalvik cache before installing the rom.
I haven't used a stock RUU.
I have downloaded the v3 from here http://forum.xda-developers.com/showthread.php?t=773997 with init.d support.
I will stick with app2sd because I read that the sd wears off with all that writing :S
About the roms:
Yesterday I checked Leedroid but the thing that I didn't like was the partial localization..
I am using greek language.
Is there any way to solve that?
Also which other roms are more stable and worth the try?
Additionally, at the thread of the ROM I installed it says "Note that framework-res is already deodexed in this ROM".
This means that I can flash any notification bar icon I want and also the super cicle battery mod?
Thank you for your replies!
Anyone please? :S
pspuser007 said:
Additionally, at the thread of the ROM I installed it says "Note that framework-res is already deodexed in this ROM".
This means that I can flash any notification bar icon I want and also the super cicle battery mod?
Thank you for your replies!
Click to expand...
Click to collapse
With a deodexed rom you can apply global themes, fonts and mods.
With an odexed rom this is not possible, unless the mod is appropriately altered.
Hey guys/gals,
I recently bought a Koodo Galaxy s2x. After a few weeks I looked online and saw that there were some JB Roms for my phone. I couldn't resist and tried to flash one after rooting. I didn't have many problems with it, but there were some glitches that started to bug me, so I decided to see about going back to stock (I should have done this first I know). So then after hours(many) of searching, the best I could find was a T-Mobile stock Rom I decided to try and flash it (both times via odin). I also read somewhere that I should use darkside superwipe to clear my cache, so I tried that, but ever since that CWM stopped working on my phone. anytime I tried to do any back up or anything it just froze, and I had to hard boot. Finally I just tried flashing T-Mobile stock ICS, and Odin said "Failed". I decided to just unplug my phone, as I thought I already screwed it up, but after rebooting, the T-mobile Rom worked. I don't understand why it works fine if the Flash Failed. Now, I can no longer connect to kies (I'm hoping official JB will be shipped soon!), and I am wondering if I can somehow return to a stock Koodo Rom, and if it will connect to Kies again, as it previously had. I have looked a lot and have not found anything that I fully understand. I'm not overly experienced, which is why I should not have flashed to begin with. This is the closest thread I have found to help me, but I don't fully understand what all I need to do:
"Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
h t t p s : / / sourceforge.net/projects/koo...d.zip/download
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache."
Is it possible for me to get back to stock phone? and still connect to Kies? and then possibly upgrade to JB through Kies if Hercules ends up receiving it?
Thanks for any help you can give me. Here is all my current phone info incase this helps:
Model:
SGH-T989
Android Version:
4.0.3
Baseband version:
T989DTLLG2
Kernel version:
3.0.8-perf-T989UVLE1 -CL508451
[email protected] #1
SMP PREEMPT Sun May 6 15:07:07 KST 2012
Build number:
IML74K.UVLE1
Thanks.
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: https://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
arcsine said:
If your ultimate goal is to get Jellybean on your phone, check the development section of this subforum. There are numerous stable and wonderful JB roms (AOKP Milestone 6, Liquid Smooth, CM10).
To get back to your stock ROM, download it from here: h t t p s ://sourceforge.net/projects/koo...d.zip/download
Then, go into recovery (NOT odin), and flash the rom.
Click to expand...
Click to collapse
That link doesn't work, it says cannot find page. Also, my phone is currently not rooted, does it have to be rooted to flash from recovery? if not what do I do to flash from recovery? I know how to get into recovery, but after that do I use 'apply update from external storage'? Do I have to wipe the cache first?
Thanks.
PS: I just want to be able to get back to stock for now. At least until I learn more about flashing Roms. There is still lots for me to learn, like kernels, radios, Nightly's for official Roms, or even how to properly flash a rom without feeling lost. If I know a way to get back to stock comfortably, It will give me more reason to try some other Roms (once I learn how).
Here is a working link to the stock Koodo ROM: http://sourceforge.net/projects/koodostock/files/KOODO_SGH-T989D_Stock_Signed.zip/download
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted: http://galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
arcsine said:
Here is a working link to the stock Koodo ROM:
Are you running a custom ROM right now or your stock ROM? If you're running a custom ROM, it should come with root privileges. If you are running the stock ROM, you can just back it up instead of needing to download the zip from sourceforge. This guide will help you get rooted:. After rooting, get into recovery mode (if you can't get the button combinations to work, there is an app. called quick boot which reboots you into recovery/bootloader/etc). If you don't have a recovery or it's corrupt, download ROM manager from google play, and choose the 'install clockwork recovery'. Reboot to recovery to make sure it works, then uninstall rom manager (it's been known to cause bugs if you use it for other things - and I'd recommend other recoveries such as TWRP but it's a bit more advanced). From your recovery's screen, there should be a backup option. Make a complete backup and name it something appropriate. To flash a ROM, download it and put it on your storage drive. Reboot to recovery, and go to wipe. Wipe your data (factory reset), and system (only really need to wipe data in most cases, but be safe). To flash the custom ROM now (or flash the default ROM I just linked), there should be an option to 'install zip from sd card' or something similar. Choose that, browse to your ROM and install it. After installing, go to wipe and wipe your cache+dalvik cache, then reboot. There are several beginner guides sticked in the development forum, along with explanation of terms like radio/kernel/nightly/etc.
Click to expand...
Click to collapse
Thanks a ton... Worked perfectly! I'm hoping it will connect to Kies once again.. I'll let you know if it works.
Unfortunately, I still can't connect to Kies.. It just sits at the Loading status (for like 10-15 mins). But At least I don't have all of the T-mobile apps and stuff anymore!
hi, i recently got an ATT note 2. The phone I got already got Clean ROM 3.5, so I presume it is rooted, with custom recovery (TWRP when I checked). I am thinking of flashing to a diff rom and just want to ask a few questions.
1-do I need to run triangle away every time I flash to a diff rom?
2-since the phone already has a custom rom, I should not have to root it, am I correct?
3-If I want to install custom, ROMs, can I just put the ROM in the external SD and flash it that way (of course with clear cash, davik, etc as states in the rom).
4-I am thinking of playing with the CleanROM 4.2.4 or the ACE version? any issue with either one compare to the 3.5 that I am using now? any recommendation?
5-anything I need ot watch out before I flash it? I have flashed a coupole of time with htc phone and this is my first samsung phone so I don't watn to brick it.
thanks a lot guys, XDA rocks.
PUTALE said:
hi, i recently got an ATT note 2. The phone I got already got Clean ROM 3.5, so I presume it is rooted, with custom recovery (TWRP when I checked). I am thinking of flashing to a diff rom and just want to ask a few questions.
1-do I need to run triangle away every time I flash to a diff rom?
2-since the phone already has a custom rom, I should not have to root it, am I correct?
3-If I want to install custom, ROMs, can I just put the ROM in the external SD and flash it that way (of course with clear cash, davik, etc as states in the rom).
4-I am thinking of playing with the CleanROM 4.2.4 or the ACE version? any issue with either one compare to the 3.5 that I am using now? any recommendation?
5-anything I need ot watch out before I flash it? I have flashed a coupole of time with htc phone and this is my first samsung phone so I don't watn to brick it.
thanks a lot guys, XDA rocks.
Click to expand...
Click to collapse
1. No you do not need to run triangle away usually only have to run it if you are going back to stock and may want to return the phone.
2.Nope it has a Rom you are rooted !
3.That is what I do when installing a new rom factory reset wipe davlik and cache and install you may have to fix permissions with some installs as well after installing.
4.From the bit I played with the new Clean rom it is very stable with minimum if any grief Jedi 9 is also a awesome ROM and my current fave.
5.Just read up lots before you do it follow every step they tell you to take your time it is easy just make sure ya know what you are doing before you start.
6.Enjoy they are a awesome phone !!
Thanks a lot for your prompt reply. It heped a lot. I will definitelycheck the roms. I am using 3.5 and it runs really good and hate to ruin it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
PUTALE said:
Thanks a lot for your prompt reply. It heped a lot. I will definitelycheck the roms. I am using 3.5 and it runs really good and hate to ruin it.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
do a backup in twrp before flashing a new one, you can always come back
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
PUTALE said:
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
Click to expand...
Click to collapse
This is one of nice features of TWRP... ability to backup/restore individual partitions. Android stores various blocks in different partitions. To name a few, System, Data, Modem, Recovery, Boot, Cache, etc. If you just want to backup your modem for example, just check the "modem" box (and I recommend naming the folder to something significant so down the road you'll know which modem it is). When you restore, that folder will only have your modem.. so you can restore a different modem without having to change your rom, (etc). Kernels are stored in the "boot" partitions.. again, if you want to change kernels, backup the boot partition and name it properly if case you want to reflash that kernel. Generally, after my first flash of a new ROM, kernel, modem, I'll create a "boot" backup, "modem" backup, and ROM (system/data/boot) partition backups. If you look in the TWRP folders themselves, you can see the blocks which are backed up... or will be restored. Hope that helps.
PUTALE said:
thanks for the info. That brings me to another question with TWRP, when I do TWRP backup, should I backup everything, modem, efs, etc. Also, if I use that backup and I do restore, does it restore everything, program, rom, setting, etc?
Also, if I want to flash the stock ROM, would that mess up my root, recovery etc? Do I need to do anything if I flash the stock ROM? From my past experience, sometimes, it is good to flash the stock rom once in awhile since that seem to do some sort of clean up and it also helped to keep the modem and such up to date.Probaby won't keep the stock for a long time but just thought I may flash it to play with it and keep the modem files up to date. Then flash custom rom. I also read that if I want to use triangle, I must be on stock rom or it will brick my phone, so I want to make sure before I start playing with diff roms.
thanks a lot guys
Click to expand...
Click to collapse
When I back up in TWRP, I usually just go with what is default checked off. You will not mess up your root unless you really really tried to. The last time I ever had to flash back to stock then to a custom was on my Xperia X10a... You should be fine flashing a new rom without having to go back to stock as long as you do a good wipe (Wipe System, Factory Rest, Davlik, and Cache is what I do only because it doesn't hurt... I've read you do not need to do all those steps but I do them nonetheless). Do not use Triangle Away unless you plan on returning your phone or send it in for warranty. Only then should you start asking questions about that tool.
The only issue that may cause SOME confusion (not too much but some) is flashing back and forth between a 4.1.2 and a 4.2.1 since the SD card adjusts to User settings (some folders open up for individual users on 4.2 but as far as my experience goes, I have not had any issues with it, I just needed to study my SD card after each flash).
So you should be fine... just do backups, rename them to make sure you know which rom belongs to which backup, delete the old ones from the RESTORE menu in TWRP in case you are backing up the same rom to save you some space (my backups take around 2 gigs sometimes EACH) and you should be good to go... Enjoy tweaking out on your roms!
DoctorQMM said:
This is one of nice features of TWRP... ability to backup/restore individual partitions. Android stores various blocks in different partitions. To name a few, System, Data, Modem, Recovery, Boot, Cache, etc. If you just want to backup your modem for example, just check the "modem" box (and I recommend naming the folder to something significant so down the road you'll know which modem it is). When you restore, that folder will only have your modem.. so you can restore a different modem without having to change your rom, (etc). Kernels are stored in the "boot" partitions.. again, if you want to change kernels, backup the boot partition and name it properly if case you want to reflash that kernel. Generally, after my first flash of a new ROM, kernel, modem, I'll create a "boot" backup, "modem" backup, and ROM (system/data/boot) partition backups. If you look in the TWRP folders themselves, you can see the blocks which are backed up... or will be restored. Hope that helps.
Click to expand...
Click to collapse
Much appreciated for your detail explanation on the TWRP. I did a quick backup and selected all of the option and now I see the files in my external SD:
modem.emmc.win
data.ext4.win
cache.ext4.win
recovery.emmc.win
boot.emmc.win
efs.ext4.win
data.ext4.win
system.ext4.win
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
[email protected] said:
When I back up in TWRP, I usually just go with what is default checked off. You will not mess up your root unless you really really tried to. The last time I ever had to flash back to stock then to a custom was on my Xperia X10a... You should be fine flashing a new rom without having to go back to stock as long as you do a good wipe (Wipe System, Factory Rest, Davlik, and Cache is what I do only because it doesn't hurt... I've read you do not need to do all those steps but I do them nonetheless). Do not use Triangle Away unless you plan on returning your phone or send it in for warranty. Only then should you start asking questions about that tool.
The only issue that may cause SOME confusion (not too much but some) is flashing back and forth between a 4.1.2 and a 4.2.1 since the SD card adjusts to User settings (some folders open up for individual users on 4.2 but as far as my experience goes, I have not had any issues with it, I just needed to study my SD card after each flash).
So you should be fine... just do backups, rename them to make sure you know which rom belongs to which backup, delete the old ones from the RESTORE menu in TWRP in case you are backing up the same rom to save you some space (my backups take around 2 gigs sometimes EACH) and you should be good to go... Enjoy tweaking out on your roms!
Click to expand...
Click to collapse
thanks for the info/warning on the triangle. I read that it can brick the phone and also needs to be on the stock to use it. Also read that if there's too many counts, it may not work. I guess for now, I just won't touch it.
Since there's no 4.2 roms available (at least not what I have seen and want to play, CleanRom or Jedi as they are highly rated), I guess for now I do not have to worry much on the SD card issue. It will be safer I guess for now just stick with 4.1.2 until the kinks are worked out.
For the wipe system, factory, davlik, cache, do I do that before flashing it?watched a couple of video and instruction and they all have diff answers. Some people said do factory reset, flash, and then wipe davik and cache.
Again, really really appreciate all of the support guys.
PUTALE said:
Much appreciated for your detail explanation on the TWRP. I did a quick backup and selected all of the option and now I see the files in my external SD:
modem.emmc.win
data.ext4.win
cache.ext4.win
recovery.emmc.win
boot.emmc.win
efs.ext4.win
data.ext4.win
system.ext4.win
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
thanks for the info/warning on the triangle. I read that it can brick the phone and also needs to be on the stock to use it. Also read that if there's too many counts, it may not work. I guess for now, I just won't touch it.
Since there's no 4.2 roms available (at least not what I have seen and want to play, CleanRom or Jedi as they are highly rated), I guess for now I do not have to worry much on the SD card issue. It will be safer I guess for now just stick with 4.1.2 until the kinks are worked out.
For the wipe system, factory, davlik, cache, do I do that before flashing it?watched a couple of video and instruction and they all have diff answers. Some people said do factory reset, flash, and then wipe davik and cache.
Again, really really appreciate all of the support guys.
Click to expand...
Click to collapse
Think of your Nandroid (TWRP) backup as a roll back to what you are comfortable with (check everything off so you do not lose a thing if you want) in case you find that the new thing you flashed isn't all that it was cracked up to be for you or something messes up. The Nandroid backup is EVERYONE's friend.
As for flashing a new ROM and having to start all over, I will use this as an example: I have two backups; one for Paranoid Android (4.2.1 AOSPA) and Clean 4.2.5 (4.1.2). When I originally flashed my stock to Clean, I must've gotten lucky by just wiping the system (ROM only and not a factory reset) and all my data transferred over just fine with no issues... but when flashing to PA, I had to do a full wipe then start from scratch (which was not bad if you sync your apps and contacts thru Google). Also, you might want to get another backup system such as Super Backup to back up your contacts and SMS messages (be careful with backing up call logs if you go to 4.2.1 ROMs because for some reason, things went wacky for me). Titanium is a good system to use for power users but sometimes, to keep it as simple as possible, count on Google at first for your app syncing (and if you get Amazon App Store, you will have to get that APK to download the apps from that store).
Anyway, from there (if you want to play with multiple ROMs) you now have a foundation. Dirty flashing (flashing a new version of a ROM you currently have without doing a full wipe... just in case you didn't know... for me, I just wipe System [no factory reset] then flash the upgrade) should be fine... again, I'm typing from experience because there are some people who do run into issues dirty flashing and is usually not supported by the devs unless you do a full wipe and flash. I have not had any issues whatsoever dirty flashing both PA and Clean versions.
As for methods of wiping, honestly they're all right... I just posted what I usually do when I want to do a full wipe. Only if you want to do a dirty flash, you won't have to wipe or do a partial wipe (I partial wipe e.g. Clean 4.0.5 to 4.2.5: Delete last Clean Rom backup through the Restore menu, Nandroid Back Up current working Clean Rom 4.0.5, Wipe System, Install the new 4.2.5, wipe Davlik and Cache (again, I do this just in case but some devs say it's unnecessary), then reboot and wait for the apps to reset... all was where it was when I left 4.0.5.
PUTALE said:
Quick question. If I understand correctly, the modem and efs is not ROM backup, so if I just want to revert to the rom I am currently running with all apps and such, I only need to backup system, boot, data, am I correct?
Also, is there any way that I can retain my data, settings, and apps, without re-download and re-configurate everything after I flash to a new ROM? I am thinking that maybe data will do such thing but not too certain. In the past, whenever I flash to a new rom, I always download all apps again from market and setup everything again, a bit hassle but that's how I did
Click to expand...
Click to collapse
Yes... if you're retaining your current modem and recovery... to restore a rom just as it was when you backed it up, restore boot (which has the kernel), system and data. One your second question, when restoring a different rom , it's best to always restore system/data/boot together. You can use TiBu to restore your user app DATA, and individual apps usually have their own backup files you can restore (like Nova/Apex launchers [which can restore your widgets], calendar, etc).
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
PUTALE said:
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
Click to expand...
Click to collapse
I have never used that rom so I can't say for sure. Try it out and see what happens. If you don't like it, restore your backup.
PUTALE said:
much appreciated guys. thanks so much. I think I got it. Will get ready to pick a good ROM and starts flashing.
one little thing, I saw this rom here: http://forum.xda-developers.com/showthread.php?t=2124182
it says stock rooted, does that mean that it is essentailly identical to what is found on the stock rom except that it will not mess up with my recovery and rooting if I use it to flash as oppose to the guide I saw online to flash to completely stock using ODIN.
Also, I did the unlock with what I found on the thread, would that mess got messed up when I flash to different ROM?
Click to expand...
Click to collapse
That rom is one of the most recent 7105 (note2 international) samsung firmware releases... supposedly better battery life than LL7 or LL4. It's the stock MA6 pre rooted (i.e., has SuperSU app and binaries included). No other features added like you would find with CleanROM 4.2.5 for example. It includes rom and kernel... so it will write to your system, data, and boot partitions. Whatever custom recovery you have now and flash this with will not be touched.
thanks again.
Hey guys I need help. Anyone have a link to the latest rooted stock rom? How is cynogenmod these days? Is it worth making the switch? Whats the most popular rom these days?
jkj said:
Hey guys I need help. Anyone have a link to the latest rooted stock rom? How is cynogenmod these days? Is it worth making the switch? Whats the most popular rom these days?
Click to expand...
Click to collapse
Freeza always has the latest stock rooted ROM over in this thread. It's always updated shortly after each OTA is dropped (currently at MB1).
You can see my setup in my sig. I like it a lot!
CM10.1 nightlies are good, and a lot of the AOSP (4.2.2) ROMs are really stable. There are a lot of reasons to stay with TW ROMs and a lot of reasons to move over to AOSP, AOKP, and other ROMs (MIUI, etc). My recommendation would be to update your recovery to the latest (see my sig for the link to the latest TWRP, search for the latest CWM) and just flash away. As long as you stick to Sprint ROMs and nandroid up whenever you can, it's getting difficult to brick your phone.
jkj said:
I downloaded the stock odexed zip and odin but it doesnt seem like the right file type for odin to flash?
Click to expand...
Click to collapse
First off, you're going to need to have a custom recovery, if you don't already have one (most people do after they originally flash their phone). There are many guides to do this, just follow one of qbking77's great tutorials. I'd recommend using TWRP, but the latest CWM works well also.
Now that you have a custom recovery, you can try the following and it might get you out of the bootloop:
In the custom recovery, clear (wipe) both cache and dalvik cache. Then reboot the phone (reboot menu -> system).
If the above doesn't work to get you through the bootloop, try the instructions below:
Now that you have a custom recovery, you need to get the files onto your phone. Since you cannot turn your phone on to download it or connect through USB, you'll have to do it through recovery. Since I use TWRP, I'll walk you through the menu's for that (CWM should be similar).
Connect USB cable to computer -> Mount Menu -> Mount USB Storage.
Now your computer should see a "removable disk" with the contents of your SD Card on it. Now you can copy the ROM you downloaded over to the SD Card.
Now that the file is actually on the phone, you can flash the ROM zip in recovery. Whenever you do this, it's best to do what is called a "full wipe" in the recovery. You'll lose all your apps, settings, etc but it's much better than having a paperweight. In TWRP, what I always do is the following:
1) Nandroid backup: I normally name it something along the lines of "2013-03-14 - ROM NAME - ROM VERSION." This way, when I look through my backups, I can easily see what I was running (what I'm restoring when I want to restore).
2) Wipe Menu - Factory Reset. This will wipe all custom data off of the phone. For me, this is a must before flashing any new ROM. Other people will "dirty flash" Roms on top of each other. For me, that's a recipe for disaster, as any leftover settings/code will inevitably interfere with the new ROM and will mess things up.
3) Wipe Menu - Dalvik Cache and Cache: If I recall correctly, the Factory Reset does both of these, but it doesn't hurt to do it again.
4) Install: This is where you find the ROM zip file you downloaded and install it. Should take less than a minute, but some larger ROMs could take a little longer (not 10 minutes, though).
3) Wipe Menu - Dalvik Cache and Cache: Again, not technically required, but I tend to wipe the cache and dalvik cache very often.
3) Reboot Menu - System: Pretty self-explanatory, but it'll reboot your phone and you can set it up all over again.
In the future, it's best to have Titanium Backup to back up apps and data (For me it's worth the cost to upgrade to Pro). I have mine set up to backup all data every night at 3 am, with a maximum of 5 backups per app. This gives me almost a week of backups that I can restore for every app I have installed. The only thing to keep in mind with TiB is that you can backup/restore system apps that won't work with a new ROM. For example, if I backed up the Samsung Connection Optimizer on the stock rooted ROM and tried to restore it to LiquidSmooth (a 4.2.2 AOSP ROM), it wouldn't work. In fact, it could mess things up on my new ROM. So you might want to pick and choose system apps (RED items) carefully when you're restoring. Next time you want to try out a new ROM (or if you need to restore again because of a bootloop), you can just restore your apps/settings through TiB and not go through 2 hours of setting up all your settings again (for me I like that I can restore all the wifi access spots settings... saves me from explaining why I need my friend's WEP key for the fifth time this month).
Anyways, this post has turned into a novel. Please let me know if you have any more questions (and CNexus or anyone else can correct anything that's wrong)
I got it going by wiping cache and data. I should've tried with just cache wiped. Its annoying to have to redo everything but better than a brick.
Now for some reason my wifi wont turn on. Reflashed again now I'm good to go.
Ok, completely new with this. I did a basic root, got superuser cwm and busybox from my understanding. I used Samsung Galaxy Toolkit v7.0.0
I would like to install the MoAR onto my phone. But I'm not 100% sure how to do so. I have Odin v3.4, I was going to do it as a PDA file. But I don't see anything that says it's a .tar file.
If someone could point me in the right direction, or a video would be great.
jrodcamaro said:
Ok, completely new with this. I did a basic root, got superuser cwm and busybox from my understanding. I used Samsung Galaxy Toolkit v7.0.0
I would like to install the MoAR onto my phone. But I'm not 100% sure how to do so. I have Odin v3.4, I was going to do it as a PDA file. But I don't see anything that says it's a .tar file.
If someone could point me in the right direction, or a video would be great.
Click to expand...
Click to collapse
I'm going to assume you're able to boot into a custom recovery (CWM). I persoanlly use TWRP, but either will work well for this. If you can't go through the root process again, based on qbking77's thread. Check out the videos and learn how to use Odin to gain root and a custom recovery. (always good to take a refresher course).
Here are directions on how to flash a Rom below. The instructions will be for TWRP, but CWM has similar options/settings
Make sure the zip of the Rom you downloaded is on your externalSD Card or the root directory of your internal memory.
Turn your phone completely off (hold down power for 3-5 seconds)
Boot your phone into recovery. Hold Up, Menu, and Power for a few seconds (until SAMSUNG appears on your screen and the phone vibrates)
Make a Nandroid backup. I can't emphasize this enough. In flashing, it's a certainty that at least one time, something will mess up. When that happens, you want to be able to restore a backup. In TWRP, just go into Backup Menu and choose where you want it (internal vs. External storage). It takes my phone a few (5-10) minutes to completely backup my data.
In TWRP, click the wipe button, then system. This will completely wipe the Rom from your phone. Doing this will allow you to get a "clean" install, without any settings or leftover files from your old Rom getting in the way. Instead, you could only wipe data (factory reset), which is good enough for most Roms. I'd still recommend a system wipe, though, as you never know exactly what might be left over from your old Rom (especially when going from 4.1.X to 4.2.X or vice-versa).
Also while in the Wipe menu, wipe Cache and Dalvik Cache (can't hurt).
Go back to the TWRP main menu.
Click Install, then find your Rom zip file (may have to switch from internal to external storage).
Let TWRP do it's thing.
MOAR rom already installed. If, in the future, you flash an AOSP Rom, you should now flash the correct gapps package from goo.im. Make sure you're flashing the correct one, as if you don't, your google apps will force close upon use.
Reboot into system and give it time to boot (first boot sometimes takes a couple of minutes).
Set up your phone the way you like.
These should be the directions to follow whenever you flash a new Rom. Some Roms (such as the MOAR Rom) have the Aroma installer, so you'll have more options once you choose to flash the Rom zip, but those are typically easy to follow (and vary from Rom to Rom, so I won't be able to give you a good guide on that).
Hope this helps!
I could tell you but from what you're asking, honestly I think it's better not to and to force you to read a lot more. I am pretty new to this stuff too, joined this site in like march but I did about 3 weeks worth of reading before I rooted and flashed my first ROM. I'm not trying to be mean here but the question you're asking will be the least of your worries once you read a little more. I recommend you read this Q&A thread, it's also at the top of the Q&A forum.
Edit: It seems good guy topherk here gave you the info, I stand by what I said though, from a fellow newbie to another
jrodcamaro said:
Ok, completely new with this. I did a basic root, got superuser cwm and busybox from my understanding. I used Samsung Galaxy Toolkit v7.0.0
I would like to install the MoAR onto my phone. But I'm not 100% sure how to do so. I have Odin v3.4, I was going to do it as a PDA file. But I don't see anything that says it's a .tar file.
If someone could point me in the right direction, or a video would be great.
Click to expand...
Click to collapse
Download the rom on your pc and transfer it to your sd card or internal sd card on your phone. Don't put the rom zip file in any folders as it's easier to find, commonly referred to as the root of your sd card. Power off your phone if your still on stock, after it shuts down hold the volume up button+the home button and then hold power button, this will take you to your custom recovery. First thing to do once in your recovery is make backup of your current rom, make sure you have at least 3GB free space on either your sd or internal sd, some backups can be even bigger, if you don't have space it should tell you. After your backup is done, wipe cache, dalvik cache, factory reset and then flash your rom, after it's done and you see it was successful, fix permissions and reboot...you should be good to go at that point. If all is running well you can boot back into cwm, select restore and only restore /data, to get all your apps and their data back, fix permissions again and reboot. You can use titanium backup or my backup root /pro to restore apps and data but personally I don't prefer those methods. If you have any issues, restore your backup and try again.
I see I was slow again as topherk said everything and then some lol...still posting this just in case it helps at all.
Edit; just to throw it out there I'll tell you how I do things, once your more experienced this could make flashing roms, kernels, tweaks ect, easier. I always make a backup first before I switch roms. Then I simply wipe cache, dalvik cache, flash new rom and fix permissions....reboot and enjoy, this is known as a dirty flash, some roms don't dirty flash well, some work great.
Also I always 100% of the time download roms, kernels ect straight from my phone, never had a bad download that I'm aware of, I don't check md5 sums, I just verify the size of the dl matches what I dl'd. My dl's go to my download folder on my ext sd card so when I go into recovery, I know to look in my download folder on the ext sd card.
Other things to note about dirty flashing if you choose to do it, figure out your rom issues quietly and it can't hurt to try dirty flashing if you always remember rule#1.....make a backup first. If you get stuck in a boot loop, just pull the battery, put it back in and 3 button boot to recovery and restore your backup.
Yeah, the main reason I prefer a clean flash is that when people dirty flash, any and all problems will not be supported by the developer. And since the person is asking how to flash a Rom, I doubt that they'd know what to do with a FC. I'd prefer if they would do a clean flash until they get used to it. I do all my app backups in Titanium Backup, and even then I have to be careful not to restore something that might mess up the new Rom.
Anyways, I really liked your advice with the backups: if you're ever stuck in a bootloop, you can just restore your backup. I recently tried out a new Rom that I wasn't too fond of, and in a few minutes was back to my LiquidSmooth. No sweat.
Sent from my SPH-L710 using xda app-developers app