Develop Bugs

Cingular GPRS/3G Settings

For those that have upgraded to the latest ROM you probably don't have the GRPS settings, I hope the simple steps below will help.
CINGULAR SETTINGS
1) Start, Settings, Connections, GPRS, - CHAP Authentication
2) Start, Settings, Connections, Manage existing connections
Name: MY ISP GPRS, Edit
Name: MY ISP GPRS
Modem: Cellular Line (GPRS, 3G)
Access point name: wap.cingular
Username: WAP[email protected]
Password: CINGULAR1
Advanced tab: use server-assigned ip address, and check use IP header compression (TCP/IP).
Servers: use server-assigned addresses.

walshieau released an applicaion to automatically configure these settings a couple weeks back.
its on the forum.

jasjamming said:
walshieau released an applicaion to automatically configure these settings a couple weeks back.
its on the forum.
Click to expand...
Click to collapse
as well as 2 flavors of a cing rom and shoguns cing settings cab... sigh....

GPRS settings for Vodafone (for a XDA 2s)

I can't get the GPRS on my (formerly O2) XDA 2s to work my new network Vodafone (Pay as You GO).
Has anyone managed this?
Any suggestions?
So far I tried the settings from http://www.filesaveas.com/gprs.html

Half solved
I fiddled with it a bit more and got it to work. However it seems to lose connection "for an unnown reason" after 1-2 pages. I don't now why...
Vodafone seems to charge 13p per each page viewed on PAYG.
I thought I would put the settings here just in case someone else might need them.
In start - settings - Connectins Tab - Connections icon:
Enter name for connection: Vodafone GPRS
Select a modem: Cellular Line (GPRS)
Access point name: pp.vodafone.co.uk (for pAY AS YOU GO)
Usename: web Password: web
Domain 212.183.137.012
In advanced menu:
TCP/IP: tick "Use server-assigned IP address" Untick the rest.
Servers: tick Use server-assigned addresses, leave rest blank
In start - settings - Connectins Tab - GPRS:
I didn't change anyting here:
Authentication: PAP
GPRS - Setting: Class 10 (3R2T)
M

[Q] PROBLEM: WLAN (WPA Enterprise) does not work for a long time

Hi!
First: I do not know wether General discussion - Networking would be a better place, so if an admin thinks so, please move this thread.
my problem: after some hours, offen after night, my wlan does not work properly:
my config:
2 WLAN-routers Syslink WRT54G with DD-WRT v24-sp2 with identical config (SSID and so on - but of course different channels):
two virtual WLANs on each
1) WPA(2) Enterprise with username/pass or user certificate
radius server
for individual users
2) WPA(2) PSK for wlan radios and so on
my Desire uses 1) (tried both: username and certificate, same result)
my Desire:
various radios, now 5.10.05.23
LeeDroid V2.0a Froyo
my problem:
after some hours in the Wi-Fi config I got:
Wi-Fi: Authenticating with MY_SSID...
and this messages does not change.
This has interesting effects to my Desire:
there is still the wlan symbol in status bar, no G3 (mobile network setting is on) so my Desire seems to know, that wlan is working
htc weather app - refresh - "Unable to connect You need a network connection to use this application. Please turn on mobile network or Wi-Fi"
standard internet browser - internet works fine
http://mobil.tagesschau.de Streaming of Tagesschau in 100 Sekunden
popup "Movies or Streaming Media Player" - Movies = all works, Streaming = "Connection failes This application requieres network access ..."
Astrid snyc - works
maps - works
K-9 - new mails are received after manual "check mail" but not pushed via IMAP idle
via *#*#4636#*#*
Wifi Config
* ID 5 SSID: "MY_SSID" BSSID: null
PRIO: 67
KeyMgmt: WPA_EAP IEEE8021X Protocols: WPA RSN
AuthAlgorithms:
PairwaiseCiphers: TKIP CCMP
GroupCiphers: WEP40 WEP104 TKIP CCMP
PSK:
eapEAP
phase2: auth=MSCHAPV2
identity: My User Name
anonymous_identity:
password: xxxxxx
client_cert:
private_key:
ca_cert:
Wifi Status
Wifi State: enabled
Network State: Authenticating with MY_SSID
Supplicant State: COMPLETED
RSSI: -61
BSSID: 00:14:xxxx
SSID: MY_SSID
Hidden SSID: false
IPaddr: 192.168.1.15
MAC addr: 38:xxxx
Network ID: 5
Link Speed: 54 Mbps
Scan results:
run ping test:
ping IpAddr: pass
ping Hostname (www.google.com): pass
HTTP Client test: pass
even if there is an "authentication ..." message
my radius server log shows me no authentication process, no working and no failing one.
so, now I have to options:
wifi off/on or
going to the second wlan ap, so my Desire switches to it because this is then the stronger wifi
signal
in wifi setting now: Connecting MY_SSID, scan, Connecting, Connected with MY_SSID
after this K-9 get immediately new mails pushed via imap idle, weather updating works, streaming is fine ... and my radius server log shows me an authentication process
(I swaped both routers but no effect for my problem.)
changes in *#*#4636#*#*
Wifi State: enabled
Network State: Connected to MY_SSID
RSSI: -64
Any idea for this strange phenomenon? It is very annoying!

nobody here who uses WPA enterprise / wpa with radius?

Hi
were you able to ever fix this problem. I am currently having the same issue
thanks

there is an issue in google's android bugtracker, with many concerned users, but no help by google.
http://code.google.com/p/android/issues/detail?id=12125

Hi Folks
Does anyone know if there is a ROM that fixes this issue, or if there is a fix anywhere. We have a number of Desires in the office which all suffer this issue when connected to our Cisco based WiFi network (WPA Enterprise). We have managed to get IT to extend the re-auth period to 1hr, but they will go no further. Current work around is to take a walk to the other side of the office and force a re-associate to a new AP (or dis/enable wifi on the phone). Not ideal.
Thanks

there is still no fix to this, but I found a working solution:
Fix My Wifi
https://market.android.com/details?...wsMSwxLDEsImNvLnVrLnN5c2x5bnguZml4bXl3aWZpIl0.
https://market.android.com/details?...xLDEsImNvLnVrLnN5c2x5bnguZml4bXl3aWZpZGVtbyJd
HTH

[Q] GPS doesn't work when in dock

I installed the MIUI ROM and my GPS doesn't work when I put it in the HTC car dock. It'll work perfectly if it's not in the dock, but once I put it in the dock, the GPS immediately stops working and just says "searching for GPS" and only rarely updates my location.
I tried applying the fixes recommended by the developers of MIUI with no success. The fixes are below. Any help would be appreciated!
menu-settings-personal-my location
use wireless networks - ON (your wifi must be on, doesn't have to be connected)
use gps satellites- ON
see of gps works, if not, go back to same menu
go to gps configuration
in NTP server address, add a 0. in front, to make it 0.north-america.pool.ntp.org
supl server address: supl.google.com
supl server port: 7276
hit ok

Even with deactivated AGPS: Strange SUPL connections to amazonaws

I just discovered that my lineageOS (starlte) is doing a connection to amazonaws every time I'm using GPS (doesn't matter which app). The used port indicates that its a SUPL connect for assisted GPS (which I deactivated) . But I didn't found a configuration file like gps.conf to change that. Probem is: Those SUPL requests are known to reveal IMEI and location.
Code:
starlte:/ # tcpdump -i any -s0 port 7275
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes
12:01:27.77129 IP 192.168.179.29.33724 > ec2-52-34-211-161.us-west-2.compute.amazonaws.com.7275: Flags [S], seq 2728158607, win 65535, options [mss 1460,sackOK,TS val 4294942063 ecr 0,nop,wscale 6], length 0
15:06:27.777399 IP ec2-52-34-211-161.us-west-2.compute.amazonaws.com.7275 > 192.168.179.29.33724: Flags [R.], seq 0, ack 2728158608, win 0, length 0

Hi,
You should sniff the packet that are sent/received through these connections, both to know what information is leaking and to know of who are these servers.
you could setup a bridge connection on a PC , Fiddler should be the software for you. Or wireshark if you are more advanced.

I've also seen this on multiple of my past devices