dalvik-cache2sd = apps2sd+ - Desire Q&A, Help & Troubleshooting

If I download a rom with apps2sd and dalvik-cache2sd is that the same as apps2sd+ ?

Yes, that is correct.
Sent from my HTC Desire using XDA App

Related

Could someone root a 3uk Rom with apps2sd+ old 2. 1

As above
Sent from my HTC Desire using XDA App

App2ext and data2ext with stock ROM and root

There is an application or something similar to enable app2sd and/or data2ext?
Or there is a ROM based on stock ROM with this two features?
thanks for help!
Sent from my HTC Desire using XDA App
You can use link2sd on a stock rom (rooted) without busybox and init.d support. Im sure it wouldnt be as good as a2sd+ or data2sd.
If you want a2sd+ redcommend teppic74's rooted stock GB. If data2sd, Supernova or any other of Droidzones roms....
These are all listed in the "Everything desire is here" thread in the dev forum. Link2sd is on the market
Thanks!
I'll try asap!
Sent from my HTC Desire using XDA App
where i can download it ?
Link2sd is in play store.
Roms can be found on this forum.
All the custom roms have app2sd!
Sent from my HTC Desire using xda app-developers app
for me best are roms with that included
Try CM or BCM rom.They are all have included.
Sent from my HTC Desire CDMA using xda app-developers app
gnokiar said:
Try CM or BCM rom.They are all have included.
Sent from my HTC Desire CDMA using xda app-developers app
Click to expand...
Click to collapse
the thread started with stock Roms, not aosp.
Sent from my HTC Desire using xda app-developers app

not enough memory

Hi guys, my phone has now 2.94 GB free on sd and 10.34 MB on internal memory, but upgradind from market (1mb) the device gives me an alert of not enough memory.
Does somebody know how to solve?
Custom Rom with apps2sd enabled and a ext partition of at least 512mb on your SD card will give u all the room u want
Sent from my HTC_A510c using xda premium
thanks
i will try
use a custom rom with data2sd support and you could have up to 2 GB internal memory , just amazing , check m1ndh4x8r's Wildfire S cracker ...
maovic said:
thanks
i will try
Click to expand...
Click to collapse
Next time hit the thanks button
Try....data2sd...to increase....ur internal ......memorry
Sent from my HTC Wildfire S A510e using xda premium
..or just use Link2SD.
install cm7 for over 100mb of space
Use jinkataru Rom XE...
And...make...1 gb ext4 partion
And...then...u will...have ....1gb..
As.ur internal...application...memory
Sent from my HTC Wildfire S A510e using xda premium
What is Custom Rom with apps2sd enabled

Rom for mt wfs

I need Rom for my wfs. I use for a bit time wfsdev team, but don't work WiFi. Can you help me?
Sent from my HTC Wildfire S A510e using XDA
Try the thing rom by einstien.frat
It is pretty themed and overclocked.
I'm using it and it is awesome but internal memory is low. Only 44 mb
But i use link2sd and it solved memory problem.
I search a rom with italian language and lot of memory (I have modified my stock Rom and I have now 90mb, but I'm not sure its a good idea).
Sent from my HTC Wildfire S A510e using XDA
What is the name of the rom?
I use my original Rom, after that I have root and delete obsolete apps like HTC hub and other and I install d2ext to move other apps
Sent from my HTC Wildfire S A510e using XDA
In this moment i use cm7.2 rc1, but Italia havent android 4.0.x
Sent from my Wildfire S using XDA
Now i use cm9 rc0, work all, unless camera and video. I expect an update forma fix this.
Sent from my HTC Wildfire S A510e using XDA

Link2sd with stock rom rooted s-off

Will work?
Sent from my HTC Wildfire S A510e using xda app-developers app
Odp: Link2sd with stock rom rooted s-off
It will, but you also need init.d support, just follow instructions in this topic to enable it on stock rom
http://forum.xda-developers.com/showthread.php?t=1933849
edu_stoicescu said:
Will work?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
definately work.and i dont think link2sd needs init.d support.
its for int2ext+ and mounts2sd scripts.
I have a sd class 4 card ... What script do you recommend?few weeks ago i tryed with stock rom,same as my current rom and didnt work but now i have made my phone s-off.
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
I have a sd class 4 card ... What script do you recommend?few weeks ago i tryed with stock rom,same as my current rom and didnt work but now i have made my phone s-off.
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
which partition you are using with link2sd? use ext3 its better fast and work all the time.
for script use cronmod int2ext+
http://forum.xda-developers.com/showthread.php?t=1716124
its fast stable and great.i am using it. but for this script you need init.d support on your rom.
with s-off you can just port radio,and other ruu easily and also you can mtd partition and advanced stuff.:good:
and use ext3 partition bcz ext4 isn't support by much kernels so.
EDIT: but if you have cm9/cm10 rom installed on phone you can use int2ext4+ script (Ext4) partition. else use int2ext+ (Ext3)
How can i activate init.d support without a pc?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
How can i activate init.d support without a pc?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
difficult.i really dont know about how to add init.d support in rom(when you're using it). that guy posted link of thread which can give you init.d support.so follow it.
i think its only way.
in btw i can make rom with init.d support but i need boot and system files of rom.in short backup of rom or ruu.
I using kimsmod stock
Sent from my HTC Wildfire S A510e using xda app-developers app
How can i check if this rom have init.d active?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
I using kimsmod stock
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
if you are using this kimsmod
http://forum.xda-developers.com/showthread.php?t=1771646
it has init.d support already.
but for int2ext+ you need to reflash your rom and then right after rom flash int2ext+ script.or it wont work.
edu_stoicescu said:
How can i activate init.d support without a pc?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
1. Download https://play.google.com/store/apps/details?id=stericson.busybox , open app, pick "normal method", reboot phone.
2. Download http://www.androidfilehost.com/?fid=9390248398092764054 , open app, pick "activate"
And thats about it, no PC required.
edu_stoicescu said:
How can i check if this rom have init.d active?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
go to /system/etc and see if there init.d folder.
you have init.d support.
Thanks.see you tomorrow.good night.thanks again
Sent from my HTC Wildfire S A510e using xda app-developers app
Yasounet said:
1. Download https://play.google.com/store/apps/details?id=stericson.busybox , open app, pick "normal method", reboot phone.
2. Download http://www.androidfilehost.com/?fid=9390248398092764054 , open app, pick "activate"
And thats about it, no PC required.
Click to expand...
Click to collapse
hey man i think that play store app can install busybox not busy box run aparts(init.d).
have you try that self?
crossfire77 said:
hey man i think that play store app can install busybox not busy box run aparts(init.d).
have you try that self?
Click to expand...
Click to collapse
I wouldnt post something not checked by myself before
Yasounet said:
I wouldnt post something not checked by myself before
Click to expand...
Click to collapse
oh cool then.now i knew another method for init.d thanks mate.
This script how is working exactly?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
This script how is working exactly?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
INT2EXT+
-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-ZipAligns /data/app on every boot
-No symlinks
-First universal INT2EXT method
its dev said.
you just need to flash it. then go to mounts and storage> format /sd-ext
reboot.
now in your phone
go settings>applications>manage applications
you can see increased internal memory as you partitioned your sd card.
its same as data2sd script you have seen in old 3.5 sense rom and others but just more fast and new.
Looks very nice but i have a microsd class 4 of 32 gb. Will not be slow?
Sent from my HTC Wildfire S A510e using xda app-developers app
edu_stoicescu said:
Looks very nice but i have a microsd class 4 of 32 gb. Will not be slow?
Sent from my HTC Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Nope.it works fine.i used it before.
Give it a shot.
And also we dnt hv any other option..link2sd dont work good now.and slow phone very much after some apps and also not much apps go to sd-ext by it (atleast on my phn)
Sent from my HTC Wildfire S A510e using Tapatalk 2

Categories

Resources