i just wanna ask if my proximity sensor is messed up, i dropped it a few weeks ago and it hit the top part(Screen) part of the phone because i was texting with the KB out, well anyways i made calls involving using the headset, well i noticed when i leave my phone sitting there the screen like blinks off and on every couple of seconds and theres nothing blocking the sensor, itll just do it randomly, the sensor still turns off the screen when i put it next to my face or when i put my hand over the screen, but my question is, after i dropped my phone and that even happened, is my sensor messed up?
sounds like you're right, the proximity sensor might be a little off whack depending on how hard you dropped the phone, I think that the sensor is soldered onto the phone, so it couldnt be a loose flex cable, but I am also not an expert on rhodium hardware, so i would suggest looking online at the rhodium hardware layout to see if you could possibly fix it
thesyntax said:
sounds like you're right, the proximity sensor might be a little off whack depending on how hard you dropped the phone, I think that the sensor is soldered onto the phone, so it couldnt be a loose flex cable, but I am also not an expert on rhodium hardware, so i would suggest looking online at the rhodium hardware layout to see if you could possibly fix it
Click to expand...
Click to collapse
well i mean tbh, when i just make initial short call it doesnt happen, it only happens when i get into long calls, which is a bit odd, like i said the proximity still senses my face or hand when i block it........
that is quite strange, but you said that this has only started since you started the phone?
thesyntax said:
that is quite strange, but you said that this has only started since you started the phone?
Click to expand...
Click to collapse
well i started noticing it after i dropped the phone, and it was bad timing because im always on hands free calling and long conversations but before i never really payed attention to it much cuz i didnt really use the phone for hands free calling....
Related
Hey guys,
I was talking with a guy from my bank the other day, and the guy was mumbling something which I couldn't hear, and after asking him what did he say, he said I was pressing some keys on the phone which was a bit annoying..
but in reality I was just holding the phone to my ear and my cheek was dialing.. too embarassing.. :/
I know theres this proximity sensor on the Samsung Galaxy S, but I dont know when it is used exactly.. So if it isnt used specifically in situations like this (during call) then I think there must be a mod...
Can a Mod be built such that when the phone is held against the ear during the call, the phone gets locked, the keypad gets tucked in and display brightness gets dimmed and when its moved away from ear it gets unlocked by itself (even if there's a pattern lock), the keypad comes back on the screen and display brightness goes back to normal?
is this cool or stupid? you decide...
The proximity sensor works like this. When you cover the sensor, usually with your ear or side of your head while talking, it turns off the screen. Maybe yours is faulty? Mine is working very well, a lot better than on my previous device.
Are you female? Or do you have long hair?
My moto milestone too had that issue with long hair. It was a bad proximity sensor.
I have not had any such issues with my galaxy. : touch wood :
Sent from my Samsung Galaxy Beast using XDA app.
aditya_t90 said:
Are you female? Or do you have long hair?
My moto milestone too had that issue with long hair. It was a bad proximity sensor.
I have not had any such issues with my galaxy. : touch wood :
Sent from my Samsung Galaxy Beast using XDA app.
Click to expand...
Click to collapse
I have long hair I have the same problem... Is there a way to hold the screen ? While on the phone? Because i didnt find one..
omzart said:
I have long hair I have the same problem... Is there a way to hold the screen ? While on the phone? Because i didnt find one..
Click to expand...
Click to collapse
You can NEVER HOLD A PHONE WRONG(well unless that phone is an apple)
Try asking someone else who has long hair to make calls and see if the sensor works or not.
Then do the same thing with someone that has short hair, i.e. no hair over the ears.
If your tests are inconclusive, download the sensor test from the market and see what happens when it is placed near your palm first.
If it works as it is supposed to then next try your ear and face...tuck you hair in once. If it still works then try it without tucking your hair.
I really hope samsung did not use those defective moto sensors.
tl;dr version download sensor test from the market and ask a bunch of people to check the sensor.(You will see everything on the screen. You dont need to make half a dozen calls)
Get back and we will see what happens next
All the best
aditya_t90 said:
You can NEVER HOLD A PHONE WRONG(well unless that phone is an apple)
Try asking someone else who has long hair to make calls and see if the sensor works or not.
Then do the same thing with someone that has short hair, i.e. no hair over the ears.
If your tests are inconclusive, download the sensor test from the market and see what happens when it is placed near your palm first.
If it works as it is supposed to then next try your ear and face...tuck you hair in once. If it still works then try it without tucking your hair.
I really hope samsung did not use those defective moto sensors.
tl;dr version download sensor test from the market and ask a bunch of people to check the sensor.(You will see everything on the screen. You dont need to make half a dozen calls)
Get back and we will see what happens next
All the best
Click to expand...
Click to collapse
I meant an hold button http://www.dvhardware.net/reviews/freecombeatman/4.jpg
sorry ^^
Haha
Try pushing the screen lock button during the call.
Sent from my Samsung Galaxy Beast I9000 using XDA app.
aditya_t90 said:
Are you female? Or do you have long hair?
Click to expand...
Click to collapse
LOL NO! I'm a guy.
I have tested the proximity sensor, and I started observing when I made a call.
the screen locks when I hold it to my ear and unlocks it when I move it away.
guess I didn't enable pattern lock earlier..
problem solved
So whenever I talk to my wife she always ends up hitting buttons on the screen. (mute, speaker, etc) I told her that the screen should automatically turn off and that maybe something was wrong with her device. As soon as I got home I tested it and it worked just fine. I couldn't get it to happen, light sensor was very responsive.
Somehow she manages to hit buttons and I have no idea how. I covered up the light sensor and tried hitting every button/screen area and nothing happened.
Has anyone else experienced this before? Is there something I can settings/mods wise to help?
DanBergundy said:
So whenever I talk to my wife she always ends up hitting buttons on the screen. (mute, speaker, etc) I told her that the screen should automatically turn off and that maybe something was wrong with her device. As soon as I got home I tested it and it worked just fine. I couldn't get it to happen, light sensor was very responsive.
Somehow she manages to hit buttons and I have no idea how. I covered up the light sensor and tried hitting every button/screen area and nothing happened.
Has anyone else experienced this before? Is there something I can settings/mods wise to help?
Click to expand...
Click to collapse
Woman + X = No longer functioning properly
illogic6 said:
Woman + X = No longer functioning properly
Click to expand...
Click to collapse
:X
Another funny thing is she said her boss at work has the same problem (female) and her husband has no issue.... Ha! I don't think they have Evos though.
my wife was having the same problem and we narrowed it down to her hair causing interference with the screen sensing that her face was against it. dont know if that makes sense but seemed logical to us and now that she tries to be aware of it and move her hair out of the way the problem doesnt seem to exist. hope this helps.
freaknjoe said:
my wife was having the same problem and we narrowed it down to her hair causing interference with the screen sensing that her face was against it. dont know if that makes sense but seemed logical to us and now that she tries to be aware of it and move her hair out of the way the problem doesnt seem to exist. hope this helps.
Click to expand...
Click to collapse
Weird! Does the screen actually turn on then? I should watch the screen next time she makes a call on it.
yeah the screen was turning on while she was using it. i think whenever she would basically readjust the phone against her head it would happen if the hair would cause interference...again i'm not claiming this is some scientific answer but its what we found seemed to be causing issues for her
freaknjoe said:
yeah the screen was turning on while she was using it. i think whenever she would basically readjust the phone against her head it would happen if the hair would cause interference...again i'm not claiming this is some scientific answer but its what we found seemed to be causing issues for her
Click to expand...
Click to collapse
I see, thanks.
My wife had the same issue...earrings.
Yep, Yep. My wife has the same issue but I've never had a problem. I'm going to show her this thread so that at least she knows it's not just her. lol.
Lappie2010 said:
My wife had the same issue...earrings.
Click to expand...
Click to collapse
How would the earrings affect it?
I think it's actually the proximity sensor being highly in tune to how close it needs to be to the ear/face. It takes very little movement of the phone during a call to trigger the sensor and turn the screen back on. They probably don't even realize they're moving the phone as much as they are.
Crotchety said:
I think it's actually the proximity sensor being highly in tune to how close it needs to be to the ear/face. It takes very little movement of the phone during a call to trigger the sensor and turn the screen back on. They probably don't even realize they're moving the phone as much as they are.
Click to expand...
Click to collapse
During a call, I pulled the phone away, moved it around, etc and watched for screen to come one. It did not come on easily. I don't get it.
I need to watch her during a call and test some things.
My sis has the same issues with the moment, and I tried it out and it was fine. She does seem to use it outside her hair and does have a lot of earrings. Though this is the Moment, it still runs android and has the sensors. I'll let her know and see if she'll enjoy her phone again lol.
ReFLeX135 said:
My sis has the same issues with the moment, and I tried it out and it was fine. She does seem to use it outside her hair and does have a lot of earrings. Though this is the Moment, it still runs android and has the sensors. I'll let her know and see if she'll enjoy her phone again lol.
Click to expand...
Click to collapse
Still not sure what the issue/solution even is.
She picked up my phone last night and accidentally hung up on the person during the call! I didn't get a chance to see what happened...
She's starting to hate these phones. I need a solution.
Not a joke...but are these ladies blonds? At start of thread I was thinking hair color or earrings too. But earrings shouldn't impact the sensor as it is up top of phone and earrings would be down toward the screen.
But...if their hair was very light color...and they had phone only loosely pressed to head, I could 'guess' that the hair had enough light reflecting through it to set off the sensor.
Another thing to check on the earring side....what part of phone contacts first...do earrings hit the screen before head covers up the sensor?
My wife had dark brown hair :x
My wife too. Dark brown hair. With and without earrings. Swapped out one device, same problem. She even made it happen on mine.
I have seen it get in a mode where the proximity sensor seems to get reversed. Near head, screen on, away from head screen off. A button gets pushed at some point and then when the screen is on you can't un-mute, un-speaker, or answer a returned call from the one she just hung up on.
I think we are going to have to get her a different phone
I have the same issue but it only seems to come up with AOSP ROM's (Cyanogen & UD)
If I call Sprint and hit the prompts followed by putting the phone to my ear it presses other numbers. I think there is a delay in the proximity sensor that's causing this. I don't have long hair and my face is clean shaved so it's not that.
If I go to show someone that when everything works perfect. It's like when you call tech support for Dell, Netgear, etc. It works when you're on the phone with them and when you get off it doesn't.
I've noticed this in the past. If you are talking on the phone and you cant it just a little bit away from your ear, towards your face, you can see the backlight come back on. Also, hair can carry a static charge. So if your ladies cant the phone and the screen turns on, their hair could trigger a button press.
Is there any conceivable software-related issue that could cause the Epic's vibrator to quit working, and continue to not work after it was wiped (both data & cache), then ultimately reflashed to SPH-D700-EB13-8Gb-REL.tar.md5 using Odin? Or can I safely assume that if it still won't vibrate at all, there's probably a mechanical failure with the vibrator itself? I've already checked to make sure the vibrator and haptic feedback is enabled in settings, and also tried z-DeviceTest (it reported that the vibrator was "OK", but tapping the button did nothing).
For what it's worth, the last time I remember the vibrator working, I remember the phone was in my pocket, something triggered vibration, and it literally wouldn't stop vibrating until I pulled out the battery (I'd say it was probably vibrating nonstop for about 2-3 minutes). I can't say with 100% certainty (because I didn't really notice at the time), but I don't think the vibrator has ever worked since then. I have a hunch the vibrator's motor might have gotten burned out (though why it would have worked up to the point when I pulled the battery, but never worked again, is somewhat of a mystery).
Oh! Every woman's nightmare!
Sounds like your vibes are gone. If you did that test and it said it was good but you still did not feel it, then it is definitely locked up. The load in the electrical circuit showed good but the vibrator it self must be jammed up. Was there a dropped phone incident that might have caused a small piece of plastic to lodge in there?
Give it a good wallop > if no workie > sprint repair center
Sent from Bonsai 7.1.3.1
Top Nurse said:
Give it a good wallop > if no workie > sprint repair center
Sent from Bonsai 7.1.3.1
Click to expand...
Click to collapse
Do you do that to fix your phone and your ... well nm
jdelano said:
Do you do that to fix your phone and your ... well nm
Click to expand...
Click to collapse
Sometimes a good whack on electronic stuff works. Learned that on the tube tv's.
Sent from Bonsai 7.1.3.1
kennyglass123 said:
Oh! Every woman's nightmare!
Click to expand...
Click to collapse
Dang you beat me to it
Top Nurse said:
Sometimes a good whack on electronic stuff works. Learned that on the tube tv's.
Sent from Bonsai 7.1.3.1
Click to expand...
Click to collapse
I agree, sometime a good wack can do it - sometime the small vibrator piston can get stuck - they are so small that you may have to unstick it and a good wack will sometime jar it lose.
Although if you can open up the case where you can see it, it can be unstuck with a smaller wack.
This is no joke, as I have worked on a lot of small device eletronicss and mechanical vibrators can get stuck - funny for the dirty minds, but true. I am sure if you take it to a Sprint repair center, they can open the case and unstick the piston, and if they have the part they can fix it - worst case is to replace rather than repair, which means a longer wait unless they have one in stock.
How big of a disassembly job is involved with getting at the piston to try and un-stick it? As in, is it a fairly safe matter of removing a few screws and gently prying off a plastic shell, or are we talking about hardcore disassembly where my ability to put it back together again is likely to become a serious question?
Does anybody know the official part number if it had to be replaced?
Also, is the Epic's vibrator a conventional motor with unbalanced load, or did they actually go with something more exotic, like a linear induction motor to enable them to get more 'throw' across a wider area in less space?
Upon power up flashes green then blue, no LG logo or anything else. If i plug USB connection to the PC the PC recognizes the phone any suggestions? By the way this happened after the phone was dropped, no visible signs of the screen being cracked.
Try holding power button for like 30 seconds. Or pull battery
Was this ever resolved? My friends phone did the exact same thing the other night, you can still feel it vibrate across the unlock pads and it makes noise and everything when receiving texts, can even answer calls if you know exactly where to push accept call.
It's the strangest thing.
Looks like a broken mainboard from the drop. Or perhaps cracked screen near the connection to the mainboard.
Not Resolved
VeeDaub said:
Was this ever resolved? My friends phone did the exact same thing the other night, you can still feel it vibrate across the unlock pads and it makes noise and everything when receiving texts, can even answer calls if you know exactly where to push accept call.
It's the strangest thing.
Click to expand...
Click to collapse
Replaced the bazel/Screen/LCD, still same issue.
As I said: broken mainboard....
Same friend I was talking about earlier, exact same issue, he had his old phone he was using and just recently we found the issue, it had mild water damage from snow getting in his pocket right around the display connector inside, so we cleaned it up with alcohol, made some colors at the bottom but then would go black again, we took the logic board out, reflowed it in stages on each side so everything was good, tried it again, exactly half the screen (right side) worked perfect, so finally, brought it in, they said the display was faulty and replaced the phone under warranty.
So, conclusion, we didn't touch the display, Bell said the display was broken and just replaced his phone.
We only touched the logicboard and we got it half working, if we knew a better method of reflowing a mobile logic board (chips on both sides so you can't reflow the same way as laptop motherboard) so it was a lot harder but we probably could have fixed it if we kept at it and knew more about what size of the logic board needed the reflow the most
We used a bunch of clay if anyone is wondering, worked it in out hands till it was very plyable, make a pile slightly bigger then logic board, push board flat I to clay so it holds the underside chips pressed and in place, reflow top, repeat once cooled, it got half the screen working from a phone that had physical water damage and corrosion on the display connector so, this will probably work for you.
So i have an H812 model and last year i had the dreaded boot loop issue but got it fixed under warranty and no issue since with that. The issue that is irritating the hell out of me now is that the double tap to turn screen on just stopped working reliably. It barely ever works.
I've tried the sensor calibration from the hidden menu and i have a question about that also. My sensor acts like it calibrates fine but the # next it seems kinda low (# next to proximety cal pass ...). It's around 48. See screenshot for reference taken from xda https://forum.xda-developers.com/attachment.php?attachmentid=3513220&d=1445359160
Has my sensor just crapped out? and if so, is that normal. Any help would be appreciated, i've gotten so addicted to using that feature that people ask me what the hell i'm doing when i try to turn their phones screen on lol.
Edit: No screen protector on btw and the internal board as far as i can see seems fine too. And the double tap to turn screen off works fine.
Thanks
sunster said:
So i have an H812 model and last year i had the dreaded boot loop issue but got it fixed under warranty and no issue since with that. The issue that is irritating the hell out of me now is that the double tap to turn screen on just stopped working reliably. It barely ever works.
I've tried the sensor calibration from the hidden menu and i have a question about that also. My sensor acts like it calibrates fine but the # next it seems kinda low (# next to proximety cal pass ...). It's around 48. See screenshot for reference taken from xda https://forum.xda-developers.com/attachment.php?attachmentid=3513220&d=1445359160
Has my sensor just crapped out? and if so, is that normal. Any help would be appreciated, i've gotten so addicted to using that feature that people ask me what the hell i'm doing when i try to turn their phones screen on lol.
Edit: No screen protector on btw and the internal board as far as i can see seems fine too. And the double tap to turn screen off works fine.
Thanks
Click to expand...
Click to collapse
Is the little black rubber plug in the prox sensor. They may have forgot to put it back in. This little black plug is required for proper prox sensor to function properly.
Thnaks for the response but It worked perfectly for quite some time after the board was replaced by the service center so don't think that's it.
I'm guessing you dropped your phone. That's the problem
deltadiesel said:
I'm guessing you dropped your phone. That's the problem
Click to expand...
Click to collapse
Sorry man, never got an alert to this but better late than never . Can't recall but i might have. Why would you say that? Is there a possibility something moved or broke or just plain got whacked out of place? Of course the issue is still there. I was thinking about opening it up anyways so i'll take a look. Thanks
sunster said:
Sorry man, never got an alert to this but better late than never . Can't recall but i might have. Why would you say that? Is there a possibility something moved or broke or just plain got whacked out of place? Of course the issue is still there. I was thinking about opening it up anyways so i'll take a look. Thanks
Click to expand...
Click to collapse
So i opened it up and checked the rubber piece just to make sure and it's there. Everything else looks ok. I guess the sensor just crapped out and will just continue to live with it.