Develop Bugs

Battery icon with numbers, and 1% fix - tilt 2

I have looked around for a fix that will show the battery level in 1% increments....but nobody will confirm whether this works for the tilt 2 without causing problems. Should I just assume that if something works with WM6.1 it will work with 6.5?
Also, it is so stupid to not have a better battery icon...is there a way to replace it with one that actually shows a freaking number? I don't want anything fancy, and I don't want to install a pack that replaces ALL my icons. Anyone?
EDIT:
Just thought of this. Does anyone know how to change the colors on the top start bar, and bottom start bar in tf3d? I was thinking of wanting them both transparent, but that might make the stop icons hard to see....maybe just the bottom tranparent.....hell, I guess I could pick a dark background and make them both tranparent.
Anyway....anyone?

http://www.freewarepocketpc.net/ppc-download-ariel-battery-monitor-v1-6-2.html maybe this would help? i've used it and it doesn't replace any icons. it stays at the top bar. you can move it to cover the battery area or just leave it by the start logo

lilchip85 said:
http://www.freewarepocketpc.net/ppc-download-ariel-battery-monitor-v1-6-2.html maybe this would help? i've used it and it doesn't replace any icons. it stays at the top bar. you can move it to cover the battery area or just leave it by the start logo
Click to expand...
Click to collapse
Thanks a lot...I will check that out.
I think I would still prefer editing the built in icon...just seemed less "hacked" to me.

acolona said:
I have looked around for a fix that will show the battery level in 1% increments....but nobody will confirm whether this works for the tilt 2 without causing problems. Should I just assume that if something works with WM6.1 it will work with 6.5?
Also, it is so stupid to not have a better battery icon...is there a way to replace it with one that actually shows a freaking number? I don't want anything fancy, and I don't want to install a pack that replaces ALL my icons. Anyone?
EDIT:
Just thought of this. Does anyone know how to change the colors on the top start bar, and bottom start bar in tf3d? I was thinking of wanting them both transparent, but that might make the stop icons hard to see....maybe just the bottom tranparent.....hell, I guess I could pick a dark background and make them both tranparent.
Anyway....anyone?
Click to expand...
Click to collapse
Get NRG Rom "Photon"
Has the 1% battery and everything else you would ever ask for.

acolona said:
Thanks a lot...I will check that out.
I think I would still prefer editing the built in icon...just seemed less "hacked" to me.
Click to expand...
Click to collapse
yeah i know. i've used it for about 2 weeks until i flashed my phone lol. a lot of the roms include the 1% increments

rajuabju said:
Get NRG Rom "Photon"
Has the 1% battery and everything else you would ever ask for.
Click to expand...
Click to collapse
Not really in interested in flashing a whole new ROM just for this. The ROMS are nice, but none of them are 100% perfect....I don't want to deal with radio's....I don't want to deal with some of my keyboard buttons not working...I don't want to deal with getting some strange ATT registry setting back just so x or y program will run right.
The phone runs great now...just want a couple tweaks, not a full overhaul.

Quentin- has offered in this thread to make a modified battery.dll for various specific devices, but it seems he hasn't poked his head in that thread for about a month.

enisoc said:
Quentin- has offered in this thread to make a modified battery.dll for various specific devices, but it seems he hasn't poked his head in that thread for about a month.
Click to expand...
Click to collapse
thanks man!
I'll keep track of that thread.

I figure others might be looking for the same stuff..so I'd like to update this thread as I find what I need.
Finally found a replacement battery icon that works on the tilt 2 here:
http://forum.xda-developers.com/showpost.php?p=3598922&postcount=3473
still looking for a way to get 1% increments on the stock ROM.

acolona said:
I figure others might be looking for the same stuff..so I'd like to update this thread as I find what I need.
Finally found a replacement battery icon that works on the tilt 2 here:
http://forum.xda-developers.com/showpost.php?p=3598922&postcount=3473
still looking for a way to get 1% increments on the stock ROM.
Click to expand...
Click to collapse
You need to install that 1% increment driver for that.

ai6908 said:
You need to install that 1% increment driver for that.
Click to expand...
Click to collapse
wow.....
I hate to be a ****, but thanks captain obvious...that's the whole point of this thread....nobody has made one yet for the tilt2, they are phone specific.

acolona said:
wow.....
I hate to be a ****, but thanks captain obvious...that's the whole point of this thread....nobody has made one yet for the tilt2, they are phone specific.
Click to expand...
Click to collapse
Wow, you may hate to be but you are.
TWO experienced people posted suggestions that would work but you've chosen to not believe them or even attempt there suggestions. Why even ask?

jlczl said:
Wow, you may hate to be but you are.
TWO experienced people posted suggestions that would work but you've chosen to not believe them or even attempt there suggestions. Why even ask?
Click to expand...
Click to collapse
I probably went overboard....but if he would have read the posts he would have seen that we were discussing this in depth already. It would be like me walking into a white house press conference on the state of the economy and saying "hey...uhhh..maybe someone should try to fix it and stuff"
As for me ignoring the 2 suggestions.
1. I thanked the first guy but RESPECTFULLY mentioned that this was more of a work-around and not a fix. I also posted a fix to the first part of my problem in case he, or anyone else, was interested....not sure how that is supposed to show i ignored him.
2. The second suggestion was to a thread that the head guy didn't seem to updating anymore, which the poster stated up front as he gave me the link. I thanked him as well...and agreed that the thread did not have a solution for this issue...was never a **** to him.
Anyway.....I'm sorry, I shouldn't have reacted like that...I know he was only trying to help.
Back to the topic at hand. It appears the hold up on the 1% driver is that people are having an issue pulling the proper files from the tilt2's because of write protection or something......so looks like this is in limbo while people smarter than me attempt to help the rest of us.

Hi:
I installed the attached cab driver, and it seemed to work fine for me, with no side effects.
I found it with one of the Brian taskbars (gfreek edition), which by the way looked amazing, but the signal icon didn't get replaced with the new one.
Hope this helps

cincy1020 said:
Hi:
I installed the attached cab driver, and it seemed to work fine for me, with no side effects.
I found it with one of the Brian taskbars (gfreek edition), which by the way looked amazing, but the signal icon didn't get replaced with the new one.
Hope this helps
Click to expand...
Click to collapse
The fix you posted is for when the notification manager and the battery icon show values that are 1% away from each other. This thread is about a different issue, namely getting a 1% driver that works on the stock Tilt2 ROM. Thanks for the fix though; I think I have that problem also. I once saw my notification say 0% (when the battery driver was rejected) while the icon showed 1%.

[Q] Flashed to Boost, No GPS, Can't update profiles. What do?

Like the title says, I can't update my profiles, some authentication error. I can't get a single satellite to fix. I've tried outdoors, flat surfaces, cleared A-GPS, power cycles, New ROMS, DataJosh's Zip fix, FasterFix's New locations.. sooo many potential fixes to my problem.
Please help..

i answered your question on how to fix being able to update prl on the general thread..
"flashing" your phone to boost has nothing to prevent you from flashing a custom rom your probably doing something wrong.

Ma$etas said:
i answered your question on how to fix being able to update prl on the general thread..
"flashing" your phone to boost has nothing to prevent you from flashing a custom rom your probably doing something wrong.
Click to expand...
Click to collapse
Thanks a ton, man!
This site is kinda hard to navigate through... I'm learning.

I understand you are learning but making a thread in two places is not going to help your caus. Now we answered your profiles question like said above in the other thread. Your No GPS means you may have to try and flash other roms in hopes you get a lock. Also Boost signal sometimes is a lil shaky so make sure you are getting good 3g signal.
Also if this site is a little difficult to navigate through for you why don't you just use Google. Put your search topic in "gps fix epic touch xda" placing xda at the end of your search will prompt Google to look in xda for you already and you can see more links easier...
Not trying to be an ass but getting help in here is also about asking for it the right way and also trying to help yourself as well.... Also try other GPS apps to see if they help
Good Luck

Leejin said:
Thanks a ton, man!
This site is kinda hard to navigate through... I'm learning.
Click to expand...
Click to collapse
No problem. hey just a hint you should only post question in the Q&A threads so you wont get flamed on/hassled or even get warnings from the mod's.
You should try some apps on the market for the GPS
and if no one else has said it then WELCOME to the Site.

[Q] LED Buttons not lighting up after move to CM9

Hey guys! I just jumped the sinking Sprint ship and made the move to AT&T. I got myself a brand new LG Nitro and immediately rooted and installed CM9. I'm used to the cm experience as I had an Epic 4G on sprint. Anyways, after installing CM9 my LED buttons won't light up. Is this a known issue? I could use some help because without the LEDs its hard to use this phone in the dark since I'm not used to the button placement yet. Thanks in advance!

I just had the same problem. Look through the setting. Turn auto-bright on
Sent from my LG-P930 using XDA

Derpp. thanks man!

Settings?
I'm still getting used to the settings of CM9 and can't seem to find the spot where that toggle is. Can you give me a menu ---> location pls?
Thanks

next time do a simple search and you will find a # of posts on this topic and none of them needed to clutter up the main forum starting a new thread about it.
learn to do your own research like 99.9% of the rest of us had to do.

trobertson said:
Hey guys! I just jumped the sinking Sprint ship and made the move to AT&T. I got myself a brand new LG Nitro and immediately rooted and installed CM9. I'm used to the cm experience as I had an Epic 4G on sprint. Anyways, after installing CM9 my LED buttons won't light up. Is this a known issue? I could use some help because without the LEDs its hard to use this phone in the dark since I'm not used to the button placement yet. Thanks in advance!
Click to expand...
Click to collapse
play with settings>display>automaticbacjklight>click use custom, and set brightness to automatic

scott0 said:
next time do a simple search and you will find a # of posts on this topic and none of them needed to clutter up the main forum starting a new thread about it.
learn to do your own research like 99.9% of the rest of us had to do.
Click to expand...
Click to collapse
I performed a search before posting and was unable to find a working fix. Next time, try posting something a little more productive and less useless trolling. Thanks.

THanks
scott0 said:
next time do a simple search and you will find a # of posts on this topic and none of them needed to clutter up the main forum starting a new thread about it.
learn to do your own research like 99.9% of the rest of us had to do.
Click to expand...
Click to collapse
I'm familiar with forums thanks. It's my Android that I'm not. In fact I did do a search and found a day old thread which I figured was the best way to get my information.
Thank you for you input

[Q] Remove "connected" notification in sense 3.5

The title describes it. When connecting over 3G/HSDPA, how can I remove this? It's incredibly frustrating.

sandsrules said:
The title describes it. When connecting over 3G/HSDPA, how can I remove this? It's incredibly frustrating.
Click to expand...
Click to collapse
Read through the thread. It's there. There are also theme in the themes & apps section to remove it.

kalaker said:
Read through the thread. It's there. There are also theme in the themes & apps section to remove it.
Click to expand...
Click to collapse
what thread?

sandsrules said:
what thread?
Click to expand...
Click to collapse
The thread wheres ppl talkin about sense 3.5
Sent from MARVEL

if only people who didnt know what their talking about would shut the hell up.
trust me, several folks are working on a fix for this but as for right now the best that can be done is to hide the icon in the notification bar by making a transparent image to replace the icon in phone.apk.
but this will NOT remove the notification in the dropdown which is what im sure you are referring to. so dont let that guy lead you on a wild goose chase just cuz he doesnt understand your plain and simple question.

Cy_n_ic said:
if only people who didnt know what their talking about would shut the hell up.
trust me, several folks are working on a fix for this but as for right now the best that can be done is to hide the icon in the notification bar by making a transparent image to replace the icon in phone.apk.
but this will NOT remove the notification in the dropdown which is what im sure you are referring to. so dont let that guy lead you on a wild goose chase just cuz he doesnt understand your plain and simple question.
Click to expand...
Click to collapse
Well, I was sure he was talking about in the status bar, so just because we're both sure of different things doesn't make either of us wrong. Maybe my previous answer was slightly rude, but I was offering the location of the best fix at the present moment.
So, with two different ways to interpret this question, we both helped him, I'm sure adequately. The links below will take you to the thread to remove the icon (not the notification).
Link to theme
Link to post with phone.apk

Thanks guys, it was only because I was using mindhacker's rom (or whatever hes called) and he managed to remove it, which looked great but was one of the biggest battery drainer roms I've ever come across.

Is there a zip that I could flash to get my stock notifications in my status bar?

I flashed sacs note 5 port and im not really a fan of the lte sign for my signal. I like the stock one. Anyway there is a zip i could flash to get it back? Thanks!

jdmeg88 said:
I flashed sacs note 5 port and im not really a fan of the lte sign for my signal. I like the stock one. Anyway there is a zip i could flash to get it back? Thanks!
Click to expand...
Click to collapse
I am on the same amazing ROM from ya boy Sac. What you are referring to is the new "heads up notifications" and I hate that crap also. Download the SQLite editor app (found here... https://play.google.com/store/apps/details?id=com.speedsoftware.sqleditor ), follow the attached screenshots and change the "heads_up_notifications_enabled" value from 1 to 0. You may need to reboot for the change to work.

Hey thanks for the reply. I followed your steps to the T and unfortunately it didn't work for me.

jdmeg88 said:
Hey thanks for the reply. I followed your steps to the T and unfortunately it didn't work for me.
Click to expand...
Click to collapse
Not sure why, your obviously rooted and I am on the same ROM as you. There is also an app called Heads Off that should do the same thing, give this a try.
https://play.google.com/store/apps/details?id=com.jamworks.noheadsup

Hmm i just tried that heads off bit i didn't see what I was looking for. I know there's a way. I was looking through all of the posts in sacs thread and someoje posted a screen shot and I saw he had the sprint spark icon. Im using 'Flat style bar indicators' on xposed. But i can't seem to get 4g in front of the signal bars. So basically i just have bars...not knowing if I'm on 3g or lte. Sorry for being a headache. Just like all my stock stuff up there. The rom is amazing though. Can't wait for another update. Thank you again for your help

One more thing. I messed with my keyboard the other day and had to reflash stock s6 one. Now i dont have the symbols inside the letters. So i cant long press for a '?' Anymore i have to go to the symbols. Pretty annoying lol. I took a screen shot but i honestly have no idea how to add it to this post.

jdmeg88 said:
Hmm i just tried that heads off bit i didn't see what I was looking for. I know there's a way. I was looking through all of the posts in sacs thread and someoje posted a screen shot and I saw he had the sprint spark icon. Im using 'Flat style bar indicators' on xposed. But i can't seem to get 4g in front of the signal bars. So basically i just have bars...not knowing if I'm on 3g or lte. Sorry for being a headache. Just like all my stock stuff up there. The rom is amazing though. Can't wait for another update. Thank you again for your help
Click to expand...
Click to collapse
jdmeg88 said:
One more thing. I messed with my keyboard the other day and had to reflash stock s6 one. Now i dont have the symbols inside the letters. So i cant long press for a '?' Anymore i have to go to the symbols. Pretty annoying lol. I took a screen shot but i honestly have no idea how to add it to this post.
Click to expand...
Click to collapse
Best to ask in the Note 5 thread, cant help with that.

Cool thanks for all of your help. I appreciate it

The signal icons used on the status bar are determined by the build prop. "noble" devices use the icons which you don't like. (not to mention that they are not sized correctly in his N5 port). "trltespr" devices use the sprint spark icons that you are wanting, However changing from noble to trltespr can also effect other features in the rom. If you want the sprint icons then you will need to change the ro.device entries in the build.prop to reflect trltespr... use our N4 OG5 build.prop as reference and you will see what I'm talking about. Last thing. Making these changes in the build.prop requires a factory data reset so that the rom can setup again with the new configs. Simply editing them and rebooting will not do the trick.

Usually i dont mind doing something like this but i dont know what to change in the build.prop . If there was a guide I'd read it. But thank you. I'm glad you know what im trying to do lol

So i found this. .... https://www.google.com/url?sa=t&rct...988642&usg=AFQjCNEq-YSRLtSLgHf6b8pLijNw0sFyGg ......but it doesnt tell me which line to edit. Then i found this http://forum.xda-developers.com/not...ps/mod-edit-build-prop-international-t2951057 ...but i cant see the pics that shows you which lines or line to edit....sorry im trying here lol

I got it...thank you very much. Now id like to adjust the size of it but i didn't see that anywhere