Develop Bugs

does NE1 have the answer to wifi not connecting to the net

im trying to get an internet connection through my wifi connection. i have done search's and lots of people seem to be asking the same question but nobody has the answer.
at the moment i can access my c: using an application called Resco explorer. but i can not connect to the internet. im not sure what setting i should have on the wifi manger and on my pc. im also using AOL as my isp.
PLS PLS help :lol:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????

looks like a no then

I got mine working but setting my wireless network adapter to connect to "Work".
Under Settings>Connections>Tasks>Manage existing connections>Proxy Settings> check the "This network connects to the internet" box
then
Under Settings>Connections>Advanced>Select Networks> "Programs that automatically connect to the internet should connect using:" to "My Work Network" (and the same with one for private network)
Also in your active sync settings, make sure your connection settings allow network (Ethernet) and RAS connections.
From previous research around this, i'm pretty sure you can only use the internet pass through under "WORK" settings only.
*thought i'd better register and contribute as i've gained a fair bit from this forum.

no good anyother ideas. i have searched through hundreds of threads and still no go
help pls

Make sure you have "Enable Netbios over TCP/IP" checked in your TCP/IP Advanced settings.

i have done this on both my wifi network and my isp network.
still not working

Have you checked if you're getting an IP address from your Wireless Router's DHCP server? Also DNS settings and Gateway address should be there.
You can check this easily by using vxUtil (free )

these are my settings:
tiacxwln1 - tiacxwln compatible wireless
Ip address 192.168.0.2
subnet mask 255.255.255.0
default gateway 192.168.0.1
primary DNS 192.168.0.1
secondary dns
primary wins
seconfdary wins
DHCPs server 192.168.0.1
under serial usb
IP address 192.168.55.101
subnet mask 255.255.255.0
default gateway 192.168.55.100
primary DNS 127.0.0.1

Getting this error when I tried to allow my broadband connection to share with my wifi connection. If I unplug the wifi connection and try and share with another network I don’t get any errors.
Internet connection sharing (ics) cannot be enabled due to IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1 please ensure that no other client on the network is configured to use 192.168.0.1

hmmm ... ever had the same problem. all devices are able to connect to the same router except mine sx66.
then i change the router's channel to '1' .. tada .. now everyone is connected. it might sounds silly, but it worked for me.
try changing your ap wireless channel.

Re: does NE1 have the answer to wifi not connecting to the n
robboy said:
Edit:
also i can not connect to activesync (version 3.8.0) via wifi. maybe if i was able to connect to this the internet would work as it does when its docked??????
Click to expand...
Click to collapse
i found the problem with activesync 3.8 and 4.0 somehow, so i reverted back to 3.7, now wifi can sync.
afaik, connecting to internet has nothing to do with activesync. its a direct connection to wifi router. use work location and check the proxy settings if u hv any? (at home i use connect to internet without proxy, at work i use connect to internet with proxy).
Also, for Activsync with wifi, make sure that the WINS server address is that of yr PC u want to sync with.

VPN and Remote Desktop

Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!

here's remote desktop. How do you use it? I don't know how to set it up.

thanks!!!!
now for VPN....
cheers!

The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse

Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks

fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....

Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot

if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik

for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.

Help XDA Orbit wireless through PC

Hi guys,
Having some trouble connecting my Orbit to the internet through wi-fi...
I set my desktop to share internet connection through wireless and have been surfing on my laptop via this for ages...
Now when I switch Wi-Fi on the orbit on, it finds the network, put my WEP key in and it connects... then when I go into IE and go to a page it says "Cannot connect with current connection settings. To change your connection settings click "settings"......."
When I click settings it just takes me to the page that says
"My Work Network
Add a new modem connection
Add a new vpn server connection
Set up my proxy server"
Can anyone help with what the heck I need to be doing to get the internet working?!?!
Cheers
GK

UPDATE:
Whilst I was typing the message (supposedly still connected through wi-fi to the internet) the Orbit beeped at me and message said
"Unable to obtain a server assigned IP address. Try again later or enter an IP address in Network Settings"
Could that be whats causing the problem and how can I fix it?
Cheers
M

Solved my own problem thanks to the BBC website...
What are the chances of this happening on the same night as I get my XDA and try to set up my wireless...
http://news.bbc.co.uk/1/hi/technology/7149931.stm

Lmao, so is everything working now ?

VPN problem with Desire

I have Desire. Try to create VPN connection to my work net over 3g, GPRS or Wi-Fi. Tunnel creation is succesful. It's working perfect for 15-20 seconds then nothing. No any warnings in Phone. VPN Server says it's OK. But net resources and RDP connections are unavailable. I'm using IPsec/PP2P protocol. Server with Win2k.
Also try to connect to another VPN server (router). Same result in such different situations

Same problem here. Using hideipvpn.com service. No internet connection when connected to vpn

up? Somebody help pls

Old WinMo works excellent but my new Android doesn't want

Hotspot 3G not working any more

Hi
I've just flash the remPuzzleRom 2.2.1 and its great!
But my hotspot is not working any more...
The hotspot lunch, i can see the "3G" icon on the top
and its says that its ready to share the 3G connection
On my PC i can see the wifi network, i can connect on it but when i try to browse the net the page stay "white"
like nothing is loaded.
I try my girlfriend pc and its the same issu with "white" pages
I also installed some tethering app like Wireless Tether or Open Garden but still the same
=> Maybe my ISP block it ?
I manage to connect to the 3G of my phone on Chrismas with my Archos Table but it was with another rom
=> I also try 3/4 different rom and i had the same problem
(canal wifi is set to auto
powersaving is set to 10min in idle
adresse ip is 192.168.1.1 / 255.255.255.0
dhcp is check
ip 192.168.1.10)
Any suggestion ?
Many thx

Ok i figure this out
My telecom supplier was indeed blocking my htc 3g hotspot
I was manage to brwse the net with firefox addon that make thing that i'm a iphone so it's all good now
Bye