Related
The phone was too loud when booting up (too loud to reboot when in school ) so I created an update.zip which disables the sounds at boot time - when the little android pops-up and later at the HTC logo (boot sound).
You should be able to install these whit the cyanogen's recovery image (copy the file to the /sdcard as update.zip, boot the recovery image, apply update.zip and you are done).
* file disable_boot_sound_update-signed.zip disables the boot sounds
* file enable_boot_sound_update-signed.zip reverts it to the stock (re-enables)
The process is done by replacing the /system/media/boot_animation.xml so if you have any custom boot animations/sounds this will possibly override/discard them. You have been warned
If anyone would contribute a new (better/different) boot sound, I can package it into an update.
WARNING: To disable boot sounds on a MoDaCo custom ROM versions 1.2-2.0 use the 1.5.1_bootscreens* files
To disable boot sounds on the 1.79.482.3 firmware or prior please use the disable_boot_sound_update-signed.zip.
Enjoy
Changelog
1.1
MoDaCo custom ROM ver. 1.2-1.5.1 support
1.0
Initial release
Nice... Maybe you can also change it to get and install bootsounds from the SD card? If no sound exist there, then it will be quiet..
If these files exist in /sdcard, use them:
/sdcard/popup.wav
/sdcard/htclogo.wav
Hmmm... must check how to do that with the update script... I know it could be done by a bash/shell script within the system (booted up/no recovery)...
It's actually only one file (boot.mp3) and there are also .gif files for screen animation.
Thnx for this i was so annoying to start the phone in quite places.
very good! it works! thanks dude!
felikz said:
very good! it works! thanks dude!
Click to expand...
Click to collapse
No problem. I am also planing to do it also for the 1.2-1.5 MoDaCo ROM and later for the 2.x branch update.
Sweet! You made my day! I've been trying to solve this and here's the solution. Thx!
I made this change for some weeks ago on my HTC Hero too, but what I made was to split the MP3 file and only keep the Android "blip" sounds when starting up, but removing the LOAD HTC sound. I love my change, it's great
If anyone wants it I've now attached it.
Hi there,
Im using the Sprint CDMA Hero and just put the newly released 'Fresh' Rom on it.
Is there any way you could either make a flash/zip file to disable its sounds or explain how I can create one?
Really appreciate it.
Hi there, as many of you may know dzo or simple god makes a flashable version of android for our KAISERs.
But vefore here are some rules:
THIS THREAD IS MADE TO KEEP THE FLASHING ANDROID ON KAISER DEV THREAD CLEAN FROM USERQUESTIONS!!!
DON'T ASK USER QUESTIONS IN THE DEV THREAD!!!
This Thread is for experienced Kaiser users who aren't in development but wan't to see android running native from NAND.
THIS IS AT THE CURRENT STATE VERY VERY VERY BETA, THERE MAY BE A HIGH RISC TO BRICK YOUR DEVICE. THIS WILL COMPLETLY WIPE WINDOWS MOBILE. JUST USE IT IF YOU CAN ANSWER YOURSELF THE FOLLOWING QUESTIONS: (without search function)
-What is an .nbh file
-how to flash a kaiser
-What is HardSPL /Security unlock
-How to recover a bad rom flash?
-What to do if your device won't start anymore?
-Do you have basic android skills?
Ok Guys, little cleanup and updates:
INDEX:
-Post one:
Different flashing methods
Things to take care off
-Post two:
How to creat your own nbh files
How to make custom splash screens
-Post three:
Working Systems/rootfs
Bugs
Usefull Links
Thanks
HOW TO START ANDROID FROM NAND
Method one:
1-Download one of the nbh's here http://www.megaupload.com/?f=SA71F1MT, you'll have to look for the right panel type, Key layout and resolution needed for the rom you're flashing, just like your default.txt from sd boot.
2-Download http://www.mediafire.com/?zldjhfnkzk2
3-Copy the androidinstall.tar from the androidinstall.zip file to the root of your sdcard
4-delete/rename any old android files on your sdcard
5-Unzip the androidinstall.zip and replace the ruu_signed.nbh in it with the one you downloaded in the first link. (must be named ruu_signed.nbh)
-6Run the custom ruu.exe - thats all after reboot you'll have a flashed Cupcake android.
Method two:
1-delete/rename any old android files on your sdcard
2-Download one of the nbh's here http://www.megaupload.com/?f=SA71F1MT, you'll have to look for the right panel type, Key layout and resolution needed for the rom you're flashing, just like your default.txt from sd boot.
3-Create three empty files on your sdcard wihout any extension:
-datafstonand
-systemfstonand
-rootfstonand
4-Copy your prefered rootfs.img, system(img,ext2,sqsh) and an empty data.img to sdcard root
5-Copy the nbh file you downloaded to the root of your sdcard and rename to kaisimg.nbh
6-Reboot your device using restart button and cam button, then when it tells you, press power key to flash the new nbh.
-Reboot by pulling the battery - Thats it ( First start may take a while and may reboot randomly, just give it some time)
Different Tricks and hints (collected in the forums):
-Change Panel Type:
Run: "echo 1 > /sys/module/board_htckaiser/parameters/panel_type" through adb or init
-Experimental GPS:
For working, gps you need to replace libgps.so with the one from the vogue gps thread.
Experimental openGL Drivers ( Eclair Only)
-Download this one and flash your prefered nbh: http://rapidshare.com/files/345432577/kasiandroid_nbh_with_opengl.zip
-Install the included script sheduler, and replace the afterboot.txt with the one included in the zip file
This will install an app that will run the afterboot.txt after every boot and fix file permissions.
-Or you can open the afterboot.txt and run it in terminal after every boot.
To see if it works install the included gallery3d.apk, iff you see thumbnails, it worked
Not tested by me, yet through no time.. (Thanks to quitlahok and rzk333 for this manual)
THIS IS JUST FOR THOOSE WHO ARE MORE IN DEVELOPMENT AND LINUX
HOW TO CREATE YOUR OWN NBH FILES:
1- Set up your prefered Linux Setup, i use Debian.
2-Build kaiser kernel with wiki manual
3-git clone git://androidhtc.git.sourceforge.net/gitroot/androidhtc/tinboot
4-git clone git://androidhtc.git.sourceforge.net/gitroot/androidhtc/bootenv
5-cd bootenv
6-cp buildInitrd buildInitrd-mini
7-nano (or whatever your favorite editor is) buildInitrd-mini
8-change all instances (2 of them) of initrd to initrd-mini
9-sh buildInitrd-mini
10-cd tinboot
11-nano tinboot.S
12-the paths to fix are at the bottom of the file, it's pretty self-explanatory. higher up in the file you'll see the kernel cmdline under an .ifdef kaiser line
13-after that you'll need to download and extract any windows kitchen, and install wine however your linux distro requires and make a note of the path you extract nbhmerge.exe to as you'll need it in your tinboot.S file, along with the path to your kernel zImage and initrd-mini.gz
after that if you've got everything else in place, go ahead and run the compilekaiser script in the tinboot dir and you should have an nbh
if the nbh won't flash (i had this issue) copy the output.nb file, boot into windows, and use nbhutil.exe to convert it to an nbh and flash that one. for some reason yang doesn't work right for me personally
HOW TO CREATE CUSTOM SPLASH SCREENS: (this is a manual by POV)
1. Install HardSPL.
2. Create a BMP file in paint, size must be 240x320, save it as BMP 24bit.
3. Download SplashTool
4. Load your BMP on nb_image_converter (included in SplashTool's zip) and save it as splash.nb
5. Open SplashTool.exe and convert splash.nb to new format.
6. Pack the resulting splash.nb into a NBH file using htc rom tool.
7. Flash your cusotm NBH using CustomRUU.
This will not harm your installed android
WORKING SYSTEMS / ROOTFS'S: ( Collected in the forums)
- http://forum.xda-developers.com/showthread.php?t=587116 ION Donut, reuploaded by 160bpm
- http://forum.xda-developers.com/showthread.php?t=619980 MYNs warm Donut
- http://forum.xda-developers.com/showthread.php?t=619718 Jamezelles Sense Tattoo
- http://forum.xda-developers.com/showthread.php?t=591104 Plemens Donut AOSP
- http://forum.xda-developers.com/showthread.php?t=603028 Jamezelles Sense Hero
- http://forum.xda-developers.com/showthread.php?t=619285 Shidells Android 2.1
rootfs 2010-01-06 works best for me get it here: http://sourceforge.net/projects/androidhtc/files/
Bugs:
NOT WORKING: WiFi, GPS, Voice Call, Bluetooth
(GPS experimental with the files from first post)
Usefull Links:
Android on Sourceforge:
http://sourceforge.net/projects/androidhtc/files/
Android on htc Website:
http://www.androidonhtc.com
dzo's page:
http://it029000.massey.ac.nz/vogue/
Android SDK:
http://developer.android.com/sdk/
Tinboot dev thread:
http://forum.xda-developers.com/showthread.php?t=614275
Thanks:
dzo, plemen, jamezelle, zenulator, enatefox, mssmision, vilord, rzk333, diagdave
SORRY IF I'LL FORGET ANYONE
Here's a couple boot screens I made.
Thanks i'll add this to the first post
Thanks JeckyllHavok, good idea I keep posting over here am not into kernel things anyway
Ok after a few attempts I finally got Android flashed, and running, using my backup kaiser, which has no network connection, so the lack of wifi is a bit of a problem, but seems to be working fine so far, and fast
Just wondering if it would be possible to flash other versions, like eclair or even flan, since polyrhythmic's eclair version seems to be nice and stable, or is this going to fast to soon?
Just tested this with sshidels nexus rom, but itjust ends in bootscreen loops. Maybe other roms work
Looks like in need to learn to read. I found these instructions in the Vouge forum:
Method 2:
------------------------------------------------------------------
Check here for NBH files containing a linux kernel and initrd to allow you to flash android to your vogue and wipe windows completely.
The ROMs are dated and there are three versions.
They are identical except the resolution; 240x320, 320x428 and 320x480.
This rom will copy your rootfs, system and data to nand (the internal storage of the phone) so you will only be running from nand. To do this, make sure you have a working setup (using system.sqsh and data.img without partitions) and install the new rootfs. Make sure it still works.
Make sure you have a carrier rom to go back to. Android currently doesn't let you change any of the radio parameters so you would have to flash back to a carrier rom to re-provision your phone.
Now create 3 empty files in the root of your sd card called:
rootfstonand
systemfstonand
datafstonand
These must be all lower case with no extensions and they will be deleted once each fs has been copied.
Now flash the rom corresponding to your resolution and wait.
Click to expand...
Click to collapse
Buried for stupidity. Works great so far.
Flashing now.
1st edit: We have Android .
2nd edit:26 min it just turned itself off ... creepy ... soft reset ....I'll post back results.
3rd:39 min later Actual Phone screen came up No SIM ..Opps rebooted waiting agian.
What is working/not working with this flash.
From what I've read everything except.
Blutooth
wifi
GPS
Still waiting back at ANDROID screen
I have successfully flashed THIS BUILD using the following method:
dzo said:
...create 3 empty files in the root of your sd card called:
rootfstonand
systemfstonand
datafstonand
These must be all lower case with no extensions and they will be deleted once each fs has been copied.
Click to expand...
Click to collapse
It's a little small and awkward due to the set resolution, but it's possible to flash different builds!
Another note: When flashing builds it takes a very long time, but when it gets to the setup android screen it has a system FC and the screen doesnt respond. This has happened everytime. I had to pull the battery and when I boot it up a second time it boots just fine.
loserskater said:
I have successfully flashed THIS BUILD using the following method:
It's a little small and awkward due to the set resolution, but it's possible to flash different builds!
Another note: When flashing builds it takes a very long time, but when it gets to the setup android screen it has a system FC and the screen doesnt respond. This has happened everytime. I had to pull the battery and when I boot it up a second time it boots just fine.
Click to expand...
Click to collapse
Hi
Can you please send me the files on the sdcard. I am having an issue with every build.
Thanks
Did wifi work with any builds?
I think no, not now
Tilt
Hey all,
Working great on my tilt except the ringer just rings in the earpiece at like phone call volume. You can't really hear it unless you have your ear against it. Any thoughts?
I used DZO's build of 1.5 and one of the NBH filwa from Ra333 as the DZO one did not work.
Jaguarius said:
Hey all,
Working great on my tilt except the ringer just rings in the earpiece at like phone call volume. You can't really hear it unless you have your ear against it. Any thoughts?
I used DZO's build of 1.5 and one of the NBH filwa from Ra333 as the DZO one did not work.
Click to expand...
Click to collapse
Are the keys on the slide keyboard working correctly
OK now got two nand flashed kasiers, (both kais130), first using the 'original' flash method, ( dzo nbh, androidinstall.tar), and the other method from the vogue threads, with polyrhythmics Eclair build, which is much slower, ( uses SD card rather than Nand?).
Both seem to be working as well as can be expected at this early stage of Nand flashing.
What I would like to know is how to 'upgrade' our zImage, since some builds have a different zImage version than the one we are currently flashing with, ( I am assuming our zImage is in the NBH flash), since this may help enable wifi/gps which we are presently lacking.
THIS IS FOR TESTING ONLY. DO NOT ATTEMPT TO INSTALL THIS IF YOU DON'T KNOW HOW TO GET INTO BOOTLOADER MODE AND FLASH A ROM FROM THE SD CARD.
Announcements
We are currently replacing Tinboot with LK for boot. This will give us fastboot and many other enhancements and fixes to make our device more like a native Android device. This has already fixed some issues with GSM phones, sleep modes, and a few other things. The current issue being worked on is the power button not working (possible GPIO issue).
Introduction
This thread tracks the most recent NAND development. A huge thanks to [ACL] and WoZZeR999 for dedicating time to NAND development for us, and again, thanks to Jonpry, PHH, stinebd, and the rest of #htc-linux for their contributions. It's truly amazing what these guys have done for us, so be sure to show them your appreciation :wink:
The original NAND boot testing thread can be found here:
http://forum.ppcgeeks.com/tp2-andro...und-test-7-single-nbh-serialno-tilt2-fix.html
File Repository
Autobuild files can be found here: Index of /files/
The LK directory will contain the latest LK Bootloader and boot image code.
The rhodium_nand directory contains the latest kernels
The XDAndroid directory contains the latest OS files and updates (including the root update)
Note: We often disable autobuild when extremely experimental code is submitted, so this may not always be up to date but should be more stable than content we post in the threads.
Latest Files
LK Bootloader: http://htcdevs.wirelesstcp.net/files/LK/RHODIMG_NORECOVERY.NBH
Recovery Image: http://htcdevs.wirelesstcp.net/files/LK/recovery.img
05-22 Kernel: http://htcdevs.wirelesstcp.net/files/rhodium_nand/20110522_175721-kernel-update.zip
FRX06 OS Files: http://htcdevs.wirelesstcp.net/files/xdandroid/FRX6/update.zip
Optional - FRX06 Root: http://htcdevs.wirelesstcp.net/files/xdandroid/opt_updates/Root-Update.zip
Installation Procedure
Obtain Install Files
You need 4 files to get NAND up and running:
LK Bootloader NBH
Recovery.img
Kernel
OS Files
Install Directions
1) Set up your computer to use fastboot: http://forum.xda-developers.com/showthread.php?t=532719
2) Flash your phone with the LK Bootloader NBH
3) Copy recovery.img to your fastboot/adb folder
4) Open bash/command prompt and run fastboot flash recovery recovery.img
5) If successful, type fastboot reboot, and hold the Power Button as your phone boots
6) Your phone should boot into recovery, and there you can apply the various update.zip files in this order:
- FRX06 Update.zip
- Kernel-Update.zip
- Root-Update.zip
To navigate in recovery, use volume up/down (or up/down on keyboard) to change selection, then use End Call key (or Enter on keyboard) to make a selection.
Here's a video from ACL
http://www.youtube.com/watch?v=4r4o2CCKwvU
Work in Progress
Panel init/power down
No data on first boot
Youtube app has issues
GSM can boot with no rild arguments (no data)
Not Working at all
Camera
No bluetooth
No 3.5mm headphone jack
Frequently Asked Questions
What is NAND booting?
NAND booting uses code on the NAND to boot directly into Android without having Windows Mobile on the device. Currently, zImage and initrd.gz are stored on the internal NAND while the modules, rootfs, ext2, and data are stored on the SD card.
How do I setup NAND boot?
First, you need to download the Update Utility (CustomRUU) and the latest package. Extract the NBH to the same folder as the Update Utility and flash like you would a custom ROM. Put the included modules on the SD card (modules must be from the same package as the NBH) along with the modified rootfs.img (see first post) and system.ext2 from http://xdandroid.com/wiki/Main_Page (you can use system.ext2 from BLAZN, but XDAndroid will be better for testing)
Why don't my changes to Startup.txt work/How do I change boot options?
Because we are booting without Haret, Startup.txt is not used. Any changes to Startup.txt will have no effect. If there is a boot option you need enabled, you can either compile a new tinboot with those changes or let me know and I can compile one for you.
Where are the Android files stored and how do I update them?
Modules, rootfs.img, and system.ext2 must be stored under /andboot on the SD card. Every update will require flashing a new NBH (contains zImage) and replace the old modules file with the new one. Sometimes deleting the data.img file is necessary between builds if you experience major problems.
Wifi or other devices aren't working after an update...
The modules and zImage are a pair and must always be updated together. If you only flash the NBH but don't replace the modules file on the SD card, you will get a mismatch on the modules preventing the drivers from loading.
My battery drained and now my phone is stuck in a boot cycle! AHHHHHH!
Don't worry about it. You have two quick and easy options. First, unplug the USB cable, then remove the battery, then put the battery back in, and plug the USB cable back in. Now let it charge for 5 minutes, then turn it on, and you should be good to go. If it still does not work, unplug the USB cable, then remove the battery, then put the battery back in, attempt to enter bootloader mode and plug the USB cable back in as soon as the bootloader screen comes up. Now you can charge it for 5 minutes and restart back into Android (where you should continue charging).
Project Status
What is currently being worked on?
Battery life (up to about 9 hours now)
Backlight control (Dimming works and backlight can be turned off, but re-initializing is causing issues)
What is working?
Phone
Data
Sound
GPS
Keyboard
Wifi
Hardware 3d
What is NOT working?
Camera
Bluetooth
3.5mm headphone jack
Heh, only a matter of time before this thread made it over onto XDA. Thanks Nate
testing
has anybody here tested yet and if so... please note the outcome of the testing i would like to test but i would need more elaborate install instructions so that it is done right the first time ...also a couple of links are not working
ksper6986 said:
has anybody here tested yet and if so... please note the outcome of the testing i would like to test but i would need more elaborate install instructions so that it is done right the first time ...also a couple of links are not working
Click to expand...
Click to collapse
Thanks for the heads up. The copy/paste from PPCG killed some of the links. They should be working now
And this does work great. You can find the thread over at PPCGeeks here: http://forum.ppcgeeks.com/tp2-andro...esting-12-11-panel-power-off-now-working.html
First of all i want to thank all devs who are involved in the NAND Booting Section. I think i will test this in the next days but i must ask some questions first to do it .
1. So, do i need to do the Task 29 or is it just in case of problems.
2. Am i able to flash WinMob back if i'm failing?
yes u can go back to windows. infortunately i have been following all the steps correctly and it loads up the with letters showing its working and then i get a black screen so i think im stuck at boot any help. can someone tell me what im doing wrong. the files are in sd card/ andboot
Bieka said:
First of all i want to thank all devs who are involved in the NAND Booting Section. I think i will test this in the next days but i must ask some questions first to do it .
1. So, do i need to do the Task 29 or is it just in case of problems.
2. Am i able to flash WinMob back if i'm failing?
Click to expand...
Click to collapse
Task29 is just recommended to make sure everything is nice and clean. It makes troubleshooting much easier because it ensures nothing weird is being read from the internal nand.
You can easily flash back to WinMo by starting the phone in bootloader mode and flashing. Unfortunately, you will not be able to do the ActiveSync connection through USB and flash that way.
kabu said:
yes u can go back to windows. infortunately i have been following all the steps correctly and it loads up the with letters showing its working and then i get a black screen so i think im stuck at boot any help. can someone tell me what im doing wrong. the files are in sd card/ andboot
Click to expand...
Click to collapse
You should have three files in /sdcard/andboot: rootfs.img, system.ext2, and modules (don't rename the modules). Now flash the NBH and it should generate the data.img, and you should be good to go. It should be loaded in under 10 minutes, so if it isn't, I would check the contents of the memory card. Also note the card must be FAT32 formatted and have not be partitioned.
The panel power on/down is apparently fixed for some panels but not others. ACL and bzo have been working together on this and found that there are several different panels being used in our phones, and ACL is working on a patch to fix up the panels that aren't functioning perfectly.
mcnutty said:
RootFS
A custom rootfs.img is required to automatically configure the keyboard. You can override the automatic keyboard by creating a .kb file in your andboot folder. Accepted inputs are: rhod500.kb, rhod400.kb, rhod210.kb, and tilt2.kb
Click to expand...
Click to collapse
What about the rhod100? I have a modified rootfs.img for correct german keylayout in haret version of xdandroid. Can i use that too or do i need to delete all other .kb's? And is it even possible to get a working rhod100 keyboard? I know many questions but i think this should be BEFORE i get lost .
Bieka said:
What about the rhod100? I have a modified rootfs.img for correct german keylayout in haret version of xdandroid. Can i use that too or do i need to delete all other .kb's? And is it even possible to get a working rhod100 keyboard? I know many questions but i think this should be BEFORE i get lost .
Click to expand...
Click to collapse
Ahh yess the custom keyboard and how to create it. This threw me for a bit too and when i realized that all I had to do was open up notepad and then do a saveas rhod400.kb, I laughed at myself.
yep that easy a blank text file with the correct name and you are good to go
Well now that the thread is over on xda I tried again but still to no avail even tried two different SD cards both end with it booting but freezing at SMD: ch 0 OPENING -> OPENED. Pretty sure I have everything setup correctly three files in andboot folder on sdcard renamed rootfs to just rootfs.img but left the other two files. By the way this is on a tilt2.
Thordim said:
Ahh yess the custom keyboard and how to create it. This threw me for a bit too and when i realized that all I had to do was open up notepad and then do a saveas rhod400.kb, I laughed at myself.
yep that easy a blank text file with the correct name and you are good to go
Click to expand...
Click to collapse
Does that mean i just had to rename my rhod100_de.kb file to a rhod400 or something? That would be TO Easy ... ok i always think around corners ))
Bieka said:
Does that mean i just had to rename my rhod100_de.kb file to a rhod400 or something? That would be TO Easy ... ok i always think around corners ))
Click to expand...
Click to collapse
Actually, I didn't account for the non-US variants when creating the rootfs. I have some other modifications that I'm testing for the rootfs at the moment, so I will be sure to add the other variants back in for at least the KB overrides. I will need help with a variable for the automatic detection to work properly.
If anyone has any of the non-US variants, it would be extremely helpful for you to flash to NAND, hook up to ADB, and run "cat /sys/class/htc_hw/machine_variant" and let me know what yours is.
wifi
i want to start off by saying this is an amazing project.
But my problem is that wifi is not working for me. When i try to start wifi, it immediately says "error." I have done many flashes and used task29. i was just wondering if anyone else had this issue.
mcnutty said:
Actually, I didn't account for the non-US variants when creating the rootfs. I have some other modifications that I'm testing for the rootfs at the moment, so I will be sure to add the other variants back in for at least the KB overrides. I will need help with a variable for the automatic detection to work properly.
If anyone has any of the non-US variants, it would be extremely helpful for you to flash to NAND, hook up to ADB, and run "cat /sys/class/htc_hw/machine_variant" and let me know what yours is.
Click to expand...
Click to collapse
I will do that for you in the next days. Before Christmas it's a turbulent time for me. As soon as i can get the Time for it i will flash to nand and follow your instructions. If i need help, can i PM you?
Cheers
I'm using Neopeek's rom instead..how can i set it up? since this rom doesnt use the system.ext2 file
getting calibration without visible points to touch aka the boxes. also, boot ani glitches out on screen with a "solid" animation, and video glitchs on the bottom half of the screen. sits here indefinately.... still waiting..... haha
update: loads to lockscreen, so far can't get screen to stay on??? strange
update2: got it working, but keeps turning screen off immediately... any ideas>?
hmm, i have been trying this and i feel like i have everything right
tilt2.kb, rootfs.img, modules, and system.ext in an andboot folder in my storage card and then, a nbh with the same name as the module in a folder with customRUU.exe. I flash and then it gets to the linux boot screen, after a couple lines go by, the screen fades out and dies and restarts. My battery says 88 percent when i flash back to windows, anybody know what could be going wrong?
HTC Sense
will it only recognize only an ext2 or will it recognize squashfs.
blitzer320 said:
Well now that the thread is over on xda I tried again but still to no avail even tried two different SD cards both end with it booting but freezing at SMD: ch 0 OPENING -> OPENED. Pretty sure I have everything setup correctly three files in andboot folder on sdcard renamed rootfs to just rootfs.img but left the other two files. By the way this is on a tilt2.
Click to expand...
Click to collapse
I'm on the rhod210 (T-Mobile), and I've been having this exact issue. Any ideas?
btw, this is my first post here, but I've been reading and following this project for quite a long time. You guys are great! Thanks for all the work you do!
DiscontinuedI'll make this short and sweet. Thanks to RaiderX303 recent work porting over clockwork recovery we can now flash roms in the update.zip format directly from sd with no need for a pc to flash a new rom. This allows most importantly the ability to to create Nandroid backups and restores.
Using RaiderX303 method I repacked my favorite ROM into a zip package ready for Clockwork Recovery.
Rom is Kouno.Takaaki's HD2ONE 0.3.6. This is based on his original release and everything should work just as it did before on this rom.
Please don't ask questions as to why this doesn't have xyz, or sense this or that, this is a close to stock vanilla android mod, if you want pretty sense skins, or don't like the way it looks, then get a sense rom.
His original thread http://forum.xda-developers.com/showthread.php?t=823471
Intrid.gz is updated to his newest version as of 1.2, details here http://forum.xda-developers.com/showthread.php?t=898067
Kernel is now Prj's .3, which is based off Hastarin's 8.6, modified for nand use. Feel free to update using the method in the Intrid.gz thread if you want a different kernel.
First you need to install clockwork recovery which has been ported by RaiderX303...
http://forum.xda-developers.com/showthread.php?t=898913
Then ...
How to flash;
1: Boot into Clockwork Recovery
2: Select install zip from sdcard
3. Select choose zip from sdcard
4: Select ROM file (HD2ONEupdate.zip) and then confirm
5: Wait for All Done! message
6: A wipe is recommended but not always required, if you experience force closes or things not working, try wiping before posting problems.
Please remember, I am not the original chef for this ROM, I have only repacked it into a format suitable for clockwork recovery so keep questions related to the underlying rom to the original forum. Also if you haven't read anywhere else, when you switch over to clockwork recovery method your userdata will be wiped so backup accordingly.
Download Link:
V. 1.2 http://www.multiupload.com/86KDPU1BXO
Wifi Tether App: http://www.multiupload.com/XVVRIFG83F
V. 1.1 http://www.multiupload.com/UR329DN289
V. 1.0 http://www.multiupload.com/06Q70SASLA
Changelog:
Version 1.2 01/07/2011
-Problems with intrid.gz not recognizing /.data/config.txt should be resolved. Changes to config.txt should now work properly.
-Kernel updated to prj's .3
Version 1.1 01/05/11:
-Updated Intrid.gz to Kouno.Takaaki v1.1 Ramdisk(should make update systemfiles,kernel,etc easier) See original thread for more details http://forum.xda-developers.com/showthread.php?t=898067
-Added Google Talk app and Google News/weather widget to systemapps as not downloadable from market, for all other google apps, ie. gmail,youtube, etc, download the newest version from market.
-Small modification to default MMS settings for Tmobile US users to fix mms send issues. If creating new data img settings will load by default, otherwise goto settings,wirelessnetworks,mobilenetworks,accesspoint names, menu button, reset to default, this will get you updated mms settings for tmobile us.
-If coming from 1.0 you should be able to do a no wipe update in recovery without problems.
Verson 1.0 01/04/11:
- Initial Release
Credits to;
Kouno.Takaaki for his Rom
RaiderX303 for his work on porting Clockwork Recovery
Cotulla + DFT - For MAGLDR and all the great work thats gone into NAND on the HD2
CyanogenMod Team - For the great recovery that allows flashing custom roms
Anyone else who has contributed to android on the HD2
Thanks, wanna try..
What a beautiful day
what initrd and zimage did you use for this rom.zip?
thanks..
rmnet or ppp? thanks!
Hi, I try to change the density with 200 in /system/build.prop. But it is not work when I restart my phone?
Is there a problem? I saw that the rom is based on CM build. But I can change it on CM 6.1.1 build. Could you please help me to take a look?
flashed fine but then just sits at the green htc screen...
did hard reset..same thing...boots to green htc screen.
thnx to titanium backup im back where i started 15 mins later
Does it support data.img on sdcard?
tried this but getting a nand kernel open failed when magldr tries to load the rom any ideas?? Do i have to supply my own kernel??
Ricey
Ok to address some questions and issues.
Build is RMNET, again based on original Nand HD2ONE.
Kernel is proj .2 which is based off of Hastarins Kernels.
Intrid is also from HD2ONE nand build so... it supports data.img to sd (off by default), therefore you must create a folder in the root of your SDcard and do the following:
Name folder. ".data"
Inside ".data" , Name a new txt file "config.txt"
Then you can add any of the following lines:
data2sd=0
- default nand userdata
data2sd=1
- enable data.img support
data_size=512
- size of data.img, only work when data.img support enabled
- default 512
lcd_density=240
- change the size of icons
- default 240
gps_zone=us
- country code, us, fr, jp, etc
- default us
As for people having issues booting or getting stuck at green htc, I would give a few pointers, if first boot then keep in mind the build is creating a new data file and first boot could take 10 minutes, so be patient. Second if getting issues with magldr saying it can't load a particular file/kernel, you probably had a bad flash and I would start by doing a wipe within clockwork recovery and reflash.
bigfoots1 said:
flashed fine but then just sits at the green htc screen...
did hard reset..same thing...boots to green htc screen.
thnx to titanium backup im back where i started 15 mins later
Click to expand...
Click to collapse
Fix permissions after flashing could help
Works just as HD2ONE should - flawlessly Thanks a lot
ok, I thought i had waited 10 minutes...
wasnt sure if it was building or not.
i will try again and wait it out.
like i said titanium backup to the rescueif needed anyway...
Thank you!
drewestate said:
Ok to address some questions and issues.
Build is RMNET, again based on original Nand HD2ONE.
Kernel is proj .2 which is based off of Hastarins Kernels.
Intrid is also from HD2ONE nand build so... it supports data.img to sd (off by default), therefore you must create a txt file in the root of your SDcard and do the following:
Name new txt file ".config" (without quotes)
Then you can add any of the following lines:
data2sd=0
- default nand userdata
data2sd=1
- enable data.img support
data_size=512
- size of data.img, only work when data.img support enabled
- default 512
lcd_density=240
- change the size of icons
- default 240
gps_zone=us
- country code, us, fr, jp, etc
- default us
As for people having issues booting or getting stuck at green htc, I would give a few pointers, if first boot then keep in mind the build is creating a new data file and first boot could take 10 minutes, so be patient. Second if getting issues with magldr saying it can't load a particular file/kernel, you probably had a bad flash and I would start by doing a wipe within clockwork recovery and reflash.
Click to expand...
Click to collapse
15 minutes and counting...still sitting on green htc screen...
please explain...
if there are extra steps needed then why isn't that mentioned prior to this?
schremer said:
Fix permissions after flashing could help
Works just as HD2ONE should - flawlessly Thanks a lot
Click to expand...
Click to collapse
Since this incorporates Clockwork Recovery, can this now be used to swap kernels as well?
25 minutes at the green htc screen. I think its safe to say this has nothing to do with the data file be created. it doesn't work.
followed instructions, it flashes the zip and after reboot it just sits at htc screen...
I think im done messing with this untill i see others who have actually got this to flash and boot properly...
if there is another step then please state it...nebulous comments like "change permissions" are useless
Thanks..
bigfoots1 said:
please explain...
if there are extra steps needed then why isn't that mentioned prior to this?
Click to expand...
Click to collapse
It depends Owning android phone before used to fix permissions after flashing.
Sent from my HTC HD2 using Tapatalk
This build is freakin good
But I have a little problem with me settings.. if I want to go to settings -> sounds the whole settings fc
Tried it with fixin the permissions in the CW mod, but didn't work.. someone else has this issue?
lol..so basically your talking out your ass?
schremer said:
It depends Owning android phone before used to fix permissions after flashing.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
bigfoots1 said:
lol..so basically your talking out your ass?
Click to expand...
Click to collapse
I'm not sure if understood you right. Anything personal?
(Avis aux intéressés, j'ai traduit mon message en français, et reparti une discussion sur Frandroid.)
Hello,
I managed to map the partitions on the Gio 5660M (Bell Canada, 2.3.4, MUGK3) in order to extract an ODIN flashable complete stock backup.
I have also made a stock, rooted ROM backup by working in a hex editor. Other tools that helped the mapping were Winmerge, to do file comparisons with an Euro 5660 ROM, and Notepad++ for string searches.
Those with a 5660M that are experiencing issues after flashing Euro 5660 ROMs that have been posted here now have the possibility of flashing back their original radio and kernel.
ROM development and deployment is going to be safer going forward.
I copied the blocks with the dd command as follows:
dd if=/dev/block/bml1 of=/sdcard/bml1 bs=4096
WARNING!!! DO NOT dd /dev/block/stl5 as there have been multiple reports of bricking following reading it. We already know that this block contains the EFS partition, including the SIM-lock code. You can however dd bml5 without issue from a "live" phone. If you absolutely want stl5, you may get it by using a rooted custom recovery.
From what I've gathered bml is essentially a lower level interface to the same blocks accessed by stl, but the results differ somewhat in resulting file size.
Here are the results:
Code:
/dev/block/bml1 MIBIB
/dev/block/bml2 QCSBL
/dev/block/bml3 OEMSBL
/dev/block/bml4 AMSS
/dev/block/bml6 Essentially empty, with a FSR_STL string at the beginning.
/dev/block/bml7 arm11boot
/dev/block/bml8 boot.img. My initial assumption was based on the .ops file supplied with the Euro ROM I've done my comparisons with. This has since been confirmed with actual flashing.
/dev/block/bml9 recovery.img for the same reasons as above.
/dev/block/bml10 Essentially empty. Mine has a BMC string at the beginning which matches the CSC code on this phone, followed by an ON and an OFF.
/dev/block/bml11 Empty. \xFF all around.
/dev/block/bml12 Seems to contain the same RFS data as stl12, but with an additional 8 megs of data/padding, not readable by MagicISO.
/dev/block/bml13 Like 12 above, but user data
/dev/block/bml14 As above, but the almost empty partition
/dev/block/stl1 cannot open for read
/dev/block/stl2 cannot open for read
/dev/block/stl3 cannot open for read
/dev/block/stl4 cannot open for read
/dev/block/stl6 Empty: contains only \xFF
/dev/block/stl7 cannot open for read
/dev/block/stl8 cannot open for read
/dev/block/stl9 cannot open for read
/dev/block/stl10 cannot open for read
/dev/block/stl11 cannot open for read
/dev/block/stl12 system.rfs - is flashable as-is once tarballed. Also contains the CSC files as we're taking this from a "live" installation, contrary to an OEM provided image. (My image is also rooted for the same reason.)
/dev/block/stl13 data.rfs - User data partition
/dev/block/stl14 cache.rfs - Odin hangs when I try to flash it. Use CWM and dd back into place from the SD card.
From what I see we can't repartition our phones like the GT-I9000 guys do, so there are no PIT files to worry about. Only the OPS files which ODIN uses. We're not able to flash with Heimdall in its current configuration as it requires a PIT file.
GT-S5660M_MUGKG3_stock_rooted_ROM_v2.7z (101.46 MB)
Un7-Zip, flash tarball with Odin using the "One Package" option. Tested working on my phone. I think it goes without saying that flashing this is at your own risk.
(PDA: S5660MUGKG3 PHONE: S5660MUGKG3 CSC: S5660MBMCKG3)
Tutorial on flashing with Odin, with link for the appropriate version for our phone.
I've released my custom 5660M ROM, ArpegGioMod.
Goodbye,
Darkshado
Wow,
Thank you very much. The screen brightness issues and problems connecting to the mobile 3G network were very troublesome.
I will be flashing this ROM back to my s5660m.
THANK YOU!
STATUS UPDATE:
I have successfully flashed the image to my phone, i had to rename factory.rfs to system.rfs in order for ODIN to flash successfully. Also, it may not be important but I noticed that your image is missing the csc.rfs file.
I copied it from another ROM but it still didn't take it.
Even with the CSC.RFS file missing, it SEEMS to work GREAT! No more screen issues or 3G problems so far, I will keep you updated!
Again, thank you for uploading this, Hopefully soon there will be a CM7 for the s5660m!
Cool! Please, pretty please let me know as soon as possible how it turns out. When do you plan on trying this? This afternoon or later tonight?
Depending on how much you feel at ease with experimenting, you might be able to make a modified OPS file and new tar archive to flash only AMSS and boot.img to your system. Boot in recovery to wipe cache and dalvik-cache, then reboot the phone in normal mode. *If* things go according to plan you'd be left with a custom ROM'ed and functional phone. Otherwise just flash the whole thing back to stock.
Good luck,
Darkshado
Coolty said:
STATUS UPDATE:
I have successfully flashed the image to my phone, i had to rename factory.rfs to system.rfs in order for ODIN to flash successfully. Also, it may not be important but I noticed that your image is missing the csc.rfs file.
I copied it from another ROM but it still didn't take it.
Even with the CSC.RFS file missing, it SEEMS to work GREAT! No more screen issues or 3G problems so far, I will keep you updated!
Again, thank you for uploading this, Hopefully soon there will be a CM7 for the s5660m!
Click to expand...
Click to collapse
Great! You just made my day!
About the missing CSC file: CSC is an acronym for Carrier/Country Specific Code. The csc.rfs file is a partition image file that, as far as I can tell, is merged with the contents of the system.rfs partition. In our case, the CSC file would contain the APN settings, as well as the Bell proprietary apps like self-serve and remote PVR.
Instead, since I took the system partition from a live phone, the CSC content is already in the system.rfs partition. I think the idea behind this is that Samsung can release new CSC packages without having to update the whole firmware when "new" carriers add the phone to their lineup.
I'll see if I can edit the RFS partitions, (maybe by mounting them on the phone directly?) if so, I would be able to unroot, and make that separate CSC partition as well. That would make the backup completely stock, as if it came right from Samsung.
Another, simpler solution would be to modify the OPS file to skip the CSC partition.
One question: did you re-tar each file individually for ODIN to take them?
CM7 port: I'd love to have one on that phone as well, but I'm not in a position to tackle that project, yet. The good news is that since we now have a way to bring the phone back to stock, we can experiment safely.
Goodbye,
Darkshado
Depending on how much you feel at ease with experimenting, you might be able to make a modified OPS file and new tar archive to flash only AMSS and boot.img to your system. Boot in recovery to wipe cache and dalvik-cache, then reboot the phone in normal mode. *If* things go according to plan you'd be left with a custom ROM'ed and functional phone. Otherwise just flash the whole thing back to stock.
Click to expand...
Click to collapse
I will try this as well, will let you know the status of that as soon as I get to that. I am pretty confident with flashing phones by now
One question: did you re-tar each file individually for ODIN to take them?
Click to expand...
Click to collapse
No, I use linux so it was an easy process of copying the factory.rfs to my HDD, renaming it to system.rfs, deleting factory.rfs from TAR, and then adding system.rfs to the TAR file.
Let me know if you want me to try anything else, as I have access to linux and am pretty knowledgeable when it comes to things of that nature.
I can confirm that replacing amss and boot.img for 5660m from custom firmware meant for the 5660 works perfectly. I am using this tar: GioPro-1_2-LITE-by_ZimniY-S5660XXKQ6_S5660XXKQ5_S5660SEBKQ1.tar AND the GioPro 1.3 update zip. No screen issues or 3G problems. If you like I can upload the edited ROM for ODIN.
Step by Step guide for Noobs?
Hello,
My Samsung Gio S5660M is on an infinite loop.
Will this method fix the issue?
Can someone kindly give a step-by-step guide to this method (starting from what software/driver needed)?
Thanks a lot.
red02 said:
Hello,
My Samsung Gio S5660M is on an infinite loop.
Will this method fix the issue?
Can someone kindly give a step-by-step guide to this method (starting from what software/driver needed)?
Thanks a lot.
Click to expand...
Click to collapse
Why is your phone stuck in an infinite loop? What did you do to cause this?
did you somehow overwrote stl5(the efs partition afaik) while trying to unlock your phone?
Coolty said:
I can confirm that replacing amss and boot.img for 5660m from custom firmware meant for the 5660 works perfectly. I am using this tar: GioPro-1_2-LITE-by_ZimniY-S5660XXKQ6_S5660XXKQ5_S5660SEBKQ1.tar AND the GioPro 1.3 update zip. No screen issues or 3G problems. If you like I can upload the edited ROM for ODIN.
Click to expand...
Click to collapse
if you could post it, that would be much appreciated!!
steez003 said:
if you could post it, that would be much appreciated!!
Click to expand...
Click to collapse
I am currently in the process of uploading the edited TAR file to megaupload. The file is rather large so it may take another hour or so to complete. I will update this post when it is completed.
EDIT:
Here you go! GioPro 1.2 LITE edited for use with the Samsung Galaxy s5660m
Gio Pro 1.2 LITE updated for canadian s5660m by coolty
Coolty said:
Why is your phone stuck in an infinite loop? What did you do to cause this?
did you somehow overwrote stl5(the efs partition afaik) while trying to unlock your phone?
Click to expand...
Click to collapse
Hello Coolty,
Yes, that's exactly what happened. I tried to unlock it using Andorid Terminal Emulator, and although it gave me the unlock code, it fell into infinite loop upon restart.
Will your uploaded file fix this problem?
What would possibly provide a detailed guide on how to use the file?
Thanks.
red02 said:
Hello Coolty,
Yes, that's exactly what happened. I tried to unlock it using Andorid Terminal Emulator, and although it gave me the unlock code, it fell into infinite loop upon restart.
Will your uploaded file fix this problem?
What would possibly provide a detailed guide on how to use the file?
Thanks.
Click to expand...
Click to collapse
Hi,
I'm not one for explaining things in great detail, but the basic breakdown of the things you need (google is your friend) are:
1) Odin_Multi_Downloader_v4.42
2) The USB drivers for your phone (Hint: Samsung Kies)
3) OPS File (for this phone, I recommend GIO_v1.0.OPS)
4) Either a single TAR file or multiple files (eg, appboot, PDA, etc) For the file I am uploading it will be a single TAR file which is a package that includes all the things needed.
Then, you just remove the battery in your phone, unplug it from USB or wall charger, put battery back in, hold vol down + HOME + power until you see a screen (you may have to press a vol key after that, read the screen to see if you need to) Your screen on the phone should say DOWNLOADING... This is when you:
1) connect phone to computer via USB after installing drivers (kies, usb driver)
2) make sure kies is closed
3) run ODIN
4) choose the proper OPS file
5) click single package
6) choose the TAR file you want to flash to your phone
That's it!
EDIT:
I am providing some forum links that may better explain how to do what you need done:
How to unbrick (for samsung ACE, but applies to the 5660m) http://forum.xda-developers.com/showthread.php?t=1071970
How to use ODIN to flash your phone: http://forum.xda-developers.com/showpost.php?p=16979859&postcount=549
And of course, the great bible of GIO 5660 links and information: http://forum.xda-developers.com/showthread.php?t=1209425
I have updated my previous post to include the download link to the fixed rom for use with the s5660m.
(search for "s5660m by coolty" on the forums to find it)
Coolty said:
I am currently in the process of uploading the edited TAR file to megaupload. The file is rather large so it may take another hour or so to complete. I will update this post when it is completed.
EDIT:
Here you go! GioPro 1.2 LITE edited for use with the Samsung Galaxy s5660m
Gio Pro 1.2 LITE updated for canadian s5660m by coolty
Click to expand...
Click to collapse
Thanks! I ended up flashing my phone and I have run into a problem. For some reason Wifi won't work in GioPro. It says 'Turning on...' and then it will say 'Error'. Any ideas?
Thanks
Will this help at at all with a blank IMEI? I assume this would only help for people flashing back to stock firmware or recovering from a non-bootable or reboot loop phone?
steez003 said:
Thanks! I ended up flashing my phone and I have run into a problem. For some reason Wifi won't work in GioPro. It says 'Turning on...' and then it will say 'Error'. Any ideas?
Thanks
Click to expand...
Click to collapse
I'm also running into the same issue
Sent from my Nexus S using XDA App
Thats why i recommend you guys always do a factory reset before and after flashing , these glitches , like gps issue , wifi , stuck on boot logo , won't happen if you properly fectory reset before and after flashing....
Waqasshazad: Maybe wiping the caches will help, but the issues might be due to running a 5660 on a 5660M as well. We know the kernels and modems aren't compatible, it may go a bit further. By the way, it's spelled factory.
MacrossFX: I've seen mentions of people dd'ing their stl5 partition into a file and then back on the phone, but I'm unsure this worked in the end. I'm afraid your only solution might involve a shipment to the service center...
ClockworkMod Recovery for the Samsung Galaxy Gio GT-S5660
http://forum.xda-developers.com/showpost.php?p=16980117&postcount=559
May be this can backup for you , too with s5660m , i have tested on Gt s5660 and it worked perfectly fine..
waqasshahzad1986 said:
Thats why i recommend you guys always do a factory reset before and after flashing , these glitches , like gps issue , wifi , stuck on boot logo , won't happen if you properly fectory reset before and after flashing....
Click to expand...
Click to collapse
I followed your instructional video and did do a factory reset before and after. Maybe i'll try reflashing it again tonight and see what happens.