I have to exchange my EVO to Radio Shack and I just can't find a way to leave the phone back at stock settings!
I am currently rooted with Toast's method and running the Baked Snack 9.6 ROM. I have tried running the RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459.exe file but it keeps saying that it cannot connect to the phone, even though I have tried it both as USB Charging only and Hard Drive only.
PLEASE, anyone can help me? I have SEARCHED the forums but haven't been able to find a way to do it properly.
You might have a better chance asking this in Q&A section, or else you are going to get lit up by the cops here.
Honda hit me up on Twitter
Sent from my PC36100 using Tapatalk
vboyz103 said:
You might have a better chance asking this in Q&A section, or else you are going to get lit up by the cops here.
Click to expand...
Click to collapse
LOL Ok
jiqqaman said:
Honda hit me up on Twitter
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Done!
I had the same issue and this is how I did it:
I turned off the phone. Turned it back on holding the volume down key and power key. Selected FASTBOOT, then I opened RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459.exe and it worked perfect.
Just remember that your phone will no longer be rooted (you won't be able to can't access the recovery).
krosemm said:
I had the same issue and this is how I did it:
I turned off the phone. Turned it back on holding the volume down key and power key. Selected FASTBOOT, then I opened RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459.exe and it worked perfect.
Just remember that your phone will no longer be rooted (you won't be able to can't access the recovery).
Click to expand...
Click to collapse
Ok, I got to the FASTBOOT link and selected it. Then it switched to FASTBOOT USB. I ran that exe file on my PC but it still says that it can't connect to the phone. It keeps saying ERROR [170]: USB CONNECTION ERROR
Get the update.zip from the RUU
I believe you can also open your temporary directory.
Start, run, %tmp%
Do a search for update.zip and copy it to your sd card and boot into recovery.
If you can't find the update.zip it MIGHT be named something else, so try searching for *.zip, or delete all your temporary files, open the RUU, and then search for *.zip.
HondaCop said:
Ok, I got to the FASTBOOT link and selected it. Then it switched to FASTBOOT USB. I ran that exe file on my PC but it still says that it can't connect to the phone. It keeps saying ERROR [170]: USB CONNECTION ERROR
Click to expand...
Click to collapse
Do you have HTC Sync running? I had it running and my phone was synced when I ran the .exe file.
HondaCop said:
Ok, I got to the FASTBOOT link and selected it. Then it switched to FASTBOOT USB. I ran that exe file on my PC but it still says that it can't connect to the phone. It keeps saying ERROR [170]: USB CONNECTION ERROR
Click to expand...
Click to collapse
I did it without the fast boot, just conect the usb cable, run the RUU and that's it, anyways, i,m uploading the update.zip so you will be able to go to stock flashing from SD
http://depositfiles.com/files/2dp2m33kp
devin.slick said:
I believe you can also open your temporary directory.
Start, run, %tmp%
Do a search for update.zip and copy it to your sd card and boot into recovery.
If you can't find the update.zip it MIGHT be named something else, so try searching for *.zip, or delete all your temporary files, open the RUU, and then search for *.zip.
Click to expand...
Click to collapse
THIS WORKED! The file was actually named rom.zip, so I renamed it to PC36ENG.zip and placed it on my sdcard. THANKS!
mikevillarroel said:
I did it without the fast boot, just conect the usb cable, run the RUU and that's it, anyways, i,m uploading the update.zip so you will be able to go to stock flashing from SD
http://depositfiles.com/files/2dp2m33kp
Click to expand...
Click to collapse
I got it done by kevin.slick's tip. Thanks for your tip aswell, my friend.
HondaCop said:
I got it done by kevin.slick's tip. Thanks for your tip aswell, my friend.
Click to expand...
Click to collapse
Trankilo mi pana!
mikevillarroel said:
Trankilo mi pana!
Click to expand...
Click to collapse
is the zip you uploaded the same thing that they used to do it?
cant get mine to work either
Related
Is there a little more specific brake down of the rooting process (Laymen or lame man). How to place on the root sd drive and when I tried to open zip files, i was told they were invalid. I got them from this site.
http://forum.xda-developers.com/showthread.php?t=705113
helpful links
thanks for the help but the first link doesn't work
Which link? They work fine for me.
I got as far as step 23 in the 30 step process from XNeckFaceX but I don't see a option for select the USB-MS toggle, just the 6 wipe options. Should I have loaded the new rom flash first. I can't even power down or get out of the wipe menu. I am afraid if I remove the batt I could not reboot. What to do?
ADB FOR BEGINNERS, the rest are fine
Rockmeal said:
I got as far as step 23 in the 30 step process from XNeckFaceX but I don't see a option for select the USB-MS toggle, just the 6 wipe options. Should I have loaded the new rom flash first. I can't even power down or get out of the wipe menu. I am afraid if I remove the batt I could not reboot. What to do?
Click to expand...
Click to collapse
Hopefully by now you got through everything ok. If you are using Amon_Ra recovery, USB MS is on the main menu. Press both VolUP+DWN at the same time to go up a menu.
Rockmeal said:
ADB FOR BEGINNERS, the rest are fine
Click to expand...
Click to collapse
Sorry, I didn't know you were referring to my Sig. It's fixed now.
Try Simple Root Guide
Rockmeal said:
Is there a little more specific brake down of the rooting process (Laymen or lame man). How to place on the root sd drive and when I tried to open zip files, i was told they were invalid. I got them from this site.
Click to expand...
Click to collapse
It doesn't get any easier than the Simple Root Guide. Try that one if you have trouble with any others.
All you do is download one zip file and run the EXE (making sure you have .NET framework and HTC sync installed first), click each button for each step. And done.
webs05 said:
It doesn't get any easier than the Simple Root Guide. Try that one if you have trouble with any others.
All you do is download one zip file and run the EXE (making sure you have .NET framework and HTC sync installed first), click each button for each step. And done.
Click to expand...
Click to collapse
I did this method and it looks like it's fine but I can't use wireless tether. I get a message saying my phone is in an unknown state and to reboot (which of couse I did) but the problem persists.
gapoochi said:
I did this method and it looks like it's fine but I can't use wireless tether. I get a message saying my phone is in an unknown state and to reboot (which of couse I did) but the problem persists.
Click to expand...
Click to collapse
This usually means you need to enable USB debugging, step 2 didn't work, or you need to flash a custom ROM. To test root type "su" in a terminal. You should get "#" back. If you get that try enabling USB debugging or flashing a custom ROM. If you don't get that flash a custom ROM.
I was trying to root and nand unlock my gfs phone and now Im at a point where usb and nothing is working. All i want do is go back to stock and make it like nothing happened. And no i dont have a nandroid backup. Im screwed. Please help.
i have the sd card error and usb error similar to here: http://forum.xda-developers.com/showthread.php?t=695243
but I cant get into adb because it says device not found.
when I connect USB it says error setting up new hardware in windows.
http://forum.xda-developers.com/showthread.php?t=695243
Sent from my PC36100 using XDA App
she's going to cut his..... SOMEBODY HELP HIM!!!!!
gatorran said:
she's going to cut his..... SOMEBODY HELP HIM!!!!!
Click to expand...
Click to collapse
Yes why is this so much more difficult compared to winmo?
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=695243
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yes read above, I can't get into adb shell to do that. Thanks!
riotburn said:
Yes why is this so much more difficult compared to winmo?
Yes read above, I can't get into adb shell to do that. Thanks!
Click to expand...
Click to collapse
Was adb working for you before? You may need to install some drivers
yes it was. I need this fixed fast she just got it yesterday!, i rather like my testicles, kind of attached to them. I humbly accept all flaming and newbie calling.
riotburn said:
Yes why is this so much more difficult compared to winmo?
Yes read above, I can't get into adb shell to do that. Thanks!
Click to expand...
Click to collapse
so the first part of the commands using fastboot you don't do from adb shell. when you get the phone into fastboot, attach to your computer, you then open command prompt on computer and navigate directories until you are in the android sdk tools folder on your computer wherever it is (most people it is somewhere like c:/android-sdk-windows/tools/)
THEN you type
fastboot oem enableqxdm 0
fastboot reboot
Click to expand...
Click to collapse
no adb shell.
most people have installed adb in such a way that they can access it's tools from any directory. however, at least on my computer, fastboot commands will only work from within the android tools folder where fastboot is located.
hope this helps.
riotburn said:
yes it was. I need this fixed fast she just got it yesterday!, i rather like my testicles, kind of attached to them. I humbly accept all flaming and newbie calling.
Click to expand...
Click to collapse
Did you download the drivers??? they are not the same as the ones installed when you connect the phone....
yea also try pulling the battery and sometimes thats all it takes to get the use to be seen
then tell ur girl to mod the evo her self in case something like this happend my wife rooted and mods her's she love's to tinker
Lol at ruining your girlfriends phone. What tutorial were you following?
Sent from my HTC EVO via XDA App
i love how this is like, atleast the 4th thread someone has ruined there GFs evo due to inexperience, or the inability to read.
seriously, im not even trying to flame. i love reading this stuff.
its like general information for what NOT to do, for us that do read.
if you find the answer that works for you, mind mentioning said message?
i like to see threads that answer the questions at least, rather than have 10 suggestions, and no final response
Dam that sucks
Sent from my PC36100 using XDA App
how do i transfer the files for the second part of the usb is broken?
I was following the one that has pic by pic, and got to the point where pc36 wouldn't work. Saw that with the newest version this method wouldn't work. Went to the tutorial for that workaround and started following that. I think it got mixed up in there and thought i had nand unlocked it. Went to install the new radio, checked the system info and it wasnt the new one and started to get the problems.
Think it is rooted though because i get the # in adb shell.
How does one check to see if they did unlock nand, besides of the problem causing method i did?
I believe i ****ed up the custom recovery part. When I would load custom recovery it would flicker back and forth to the stock recovery, dont know if thats normal.
update: with more searching i found this http://forum.xda-developers.com/showpost.php?p=7136621&postcount=128 to use a update to fix the usb.
I did this and at least now it is charging, still not connecting to computer though it will charge through comp.
Can i flash back to the stock rom now? Will that fix it? How do i flash the stock rom?
Laughed at the thread title. Is the phone messed up, or the girlfriend? Gotta love misplaced modifiers.
If in fact you are rooted, you can use this method. It will put you back to "stock" with root and all the latest updates. If your computer wont mount your phone, you may have to get a micro sd card reader and plug it directly to your usb on your computer to download the files you need. Just make sure the phone is off or you unmount the sd in settings before you remove it. Or you can download them from your phone's browser, but you'll need a file manager to move the files to the root of your sd. If that wont work, your sd card might be corrupted.
http://forum.xda-developers.com/showthread.php?t=715915
dglowe343 said:
If in fact you are rooted, you can use this method. It will put you back to "stock" with root and all the latest updates. If your computer wont mount your phone, you may have to get a micro sd card reader and plug it directly to your usb on your computer to download the files you need. Just make sure the phone is off or you unmount the sd in settings before you remove it. Or you can download them from your phone's browser, but you'll need a file manager to move the files to the root of your sd. If that wont work, your sd card might be corrupted.
http://forum.xda-developers.com/showthread.php?t=715915
Click to expand...
Click to collapse
THANKS! I got it now. I had root but not nand so that prob f'ed it up. The link you sent me requires nand and has go do toasts method. I did that with no problems and had nand unlocked. So I installed the 2.0.... radio and freshevo with no problems. Thanks to everyone who helped, I will post in the first post what I did, at least what i can remember. I love xda, thanks so much guys.
I tried doing the auto root but nothing happen. When it says download I click to run first then prompt pops up then it says type <A> to install root. Then it say not able or don't have permissions, press any key to continue then auto closes. I just got the phone brand new. Any advice?
AnaBear said:
I tried doing the auto root but nothing happen. When it says download I click to run first then prompt pops up then it says type <A> to install root. Then it say not able or don't have permissions, press any key to continue then auto closes. I just got the phone brand new. Any advice?
Click to expand...
Click to collapse
Did you unzip the e4gtauto.zip package? If you try and run it from the zip file itself, it won't work.
Try running it from command prompt rather than clicking on RUNFIRST. The screen will stay around so you can see the output.
If you copy/paste the log output (between the START LOG and END LOG) I can tell you what is going on.
http://forum.xda-developers.com/showthread.php?t=1342728
AnaBear said:
http://forum.xda-developers.com/showthread.php?t=1342728
Click to expand...
Click to collapse
Huh? Yes, I know about the thread, I'm the author. For your particular problem, I made a suggestion for you to confirm and beyond that, I need to see the output to tell you what is going on.
Yes sorry about that. I didn't unzip I went straight to the file and opened it first so let me unzip the file first then should I now run it and click run first?
AnaBear said:
Yes sorry about that. I didn't unzip I went straight to the file and opened it first so let me unzip the file first then should I now run it and click run first?
Click to expand...
Click to collapse
Yes. Unzip it and click on run first. Then make your selection in the list. Make sure drivers are installed, USB debugging is checked and storage is off.
Sent From My Evo Killer!!!
Thanks so much guys I'm doing it right now. I need a new computer this thing is so old its running slow. Lol. I will give it some time and see what happens. Thanks again.
I doubt your computer speed is affecting the root. The zerg exploit takes around 2 minutes. It runs on your phone.
Is there anyway to flash tarp on the HTC 10 without using a PC? Like as a update zip on the SD card? I can't get adb commands to work at all on my new PC I get the "daemon not running" messGe I've installed Ubuntu and Linux mint and still get problems using them it's driving me insane I've been at it for 2 days I've done this 4 times before on my previous phones but I can't get it to work now WTF??!!
Anyone?
Lostmymind904 said:
Anyone?
Click to expand...
Click to collapse
Flashify ?
timbohobbs said:
Flashify ?
Click to expand...
Click to collapse
The phone isn't rooted though it's s-off thru sunshine and that's it
take the OTA.zip from somewhere, unzip it and the the firmware.zip.
You only need the android-info.txt from your current firmware.
Take out ALL .img files, download TWRP and rename it recovery.img zip it with android-info.txt into a 2PS6IMG.zip
Put this on your external SD card, shut down the phone. press volume down + Power.
Press volume up (IIRC, might also be down, its written on the screen) to flash the file.
done.
Haldi4803 said:
take the OTA.zip from somewhere, unzip it and the the firmware.zip.
You only need the android-info.txt from your current firmware.
Take out ALL .img files, download TWRP and rename it recovery.img zip it with android-info.txt into a 2PS6IMG.zip
Put this on your external SD card, shut down the phone. press volume down + Power.
Press volume up (IIRC, might also be down, its written on the screen) to flash the file.
done.
Click to expand...
Click to collapse
Did everything you said exactly but when try to flash nothing happens checked all the MD5s everything right this is driving me insane I've put insane hours into this already
Lostmymind904 said:
Did everything you said exactly but when try to flash nothing happens checked all the MD5s everything right this is driving me insane I've put insane hours into this already
Click to expand...
Click to collapse
Those are the exact instructions how to do it. What happens when you get to download mode? Are you sure the file is on the root of your external storage? Can to upload your 2PS6IMG.zip so someone can check it n
Are you running as admin?
Also HTC fact cord ?
And are all drivers installed on PC Java and all if it's "new" ur prob missing lots of necessary files
jollywhitefoot said:
Those are the exact instructions how to do it. What happens when you get to download mode? Are you sure the file is on the root of your external storage? Can to upload your 2PS6IMG.zip so someone can check it n
Click to expand...
Click to collapse
I just uploaded the file as an attachment to the post, and thx for the help
also I'm Android 6.0.1 and software version 1.81.531.1
kushman said:
Are you running as admin?
Also HTC fact cord ?
And are all drivers installed on PC Java and all if it's "new" ur prob missing lots of necessary files
Click to expand...
Click to collapse
I've run all windows updates and installed all drivers and adb files Android sdk tools aswell could it be windows 10? Never had these problems on xp
Edit: I run all programs from the administrator account and use the original cord of which I have 2 of.
Lostmymind904 said:
I just uploaded the file as an attachment to the post, and thx for the help
also I'm Android 6.0.1 and software version 1.81.531.1
Click to expand...
Click to collapse
You zipped the whole folder. Only zip the files.
jollywhitefoot said:
You zipped the whole folder. Only zip the files.
Click to expand...
Click to collapse
:crying: you Sir are a GOD!!!! Thank you Thank you thank you:good:
Lostmymind904 said:
:crying: you Sir are a GOD!!!! Thank you Thank you thank you:good:
Click to expand...
Click to collapse
Yeah. I'm amazing! Lol.
Glad you got it straight.
jollywhitefoot said:
Yeah. I'm amazing! Lol.
Glad you got it straight.
Click to expand...
Click to collapse
dude I worship you right now, you have no idea how much you'd helped thx again.
i tried it
After boot into downloadmode and start flashing it take's just a sec then till me it's done.
After i boot into recovery it take's me to stock recovery So?
I have tried to change twrp with a new one named recovery but did nothing too
Guys i tried to install MIUI 7 on my amazon firephone i downloaded all the files and did a reboot in recover all going good then when i tried to install miui files it got stuck in the recovery mood and i restarted the phone and now it is stucked on amazon logo nothing doing else even i tried wipe data twice from hard reset mood please help did it brick my phone? help me to solve this.
hamza said:
Guys i tried to install MIUI 7 on my amazon firephone i downloaded all the files and did a reboot in recover all going good then when i tried to install miui files it got stuck in the recovery mood and i restarted the phone and now it is stucked on amazon logo nothing doing else even i tried wipe data twice from hard reset mood please help did it brick my phone? help me to solve this.
Click to expand...
Click to collapse
if you can acces to recovery, the only thing you can do is adb sideload ...bin
with an original stock ROM for your fire phone
(.bin must be the extension of the file, that you can get from official amazon site)
pipataki said:
if you can acces to recovery, the only thing you can do is adb sideload ...bin
with an original stock ROM for your fire phone
(.bin must be the extension of the file, that you can get from official amazon site)
Click to expand...
Click to collapse
Thanks a lot for your help after starting this thread i did a lot of research about it and i got the same solution from Xda and i tried it is same manner as some nice people posted it on this site but now another issue is being created automatically which is adb sideload command is not working when i write the following command
adb sideload "filename.bin"
its shows me an error "*cannot read filename.bin"
i tried it by changing the file name as "update.bin" and also tried it same file name which i downloaded from the amazon site. Please help me to resolve issue. Thanks again.
hamza said:
Thanks a lot for your help after starting this thread i did a lot of research about it and i got the same solution from Xda and i tried it is same manner as some nice people posted it on this site but now another issue is being created automatically which is adb sideload command is not working when i write the following command
adb sideload "filename.bin"
its shows me an error "*cannot read filename.bin"
i tried it by changing the file name as "update.bin" and also tried it same file name which i downloaded from the amazon site. Please help me to resolve issue. Thanks again.
Click to expand...
Click to collapse
filename is the name of file... <file.bin> you have to download that file from amazon or see in index thread
pipataki said:
filename is the name of file... <file.bin> you have to download that file from amazon or see in index thread
Click to expand...
Click to collapse
yeah i downloaded the file from amazon site and its original name was "update-kindle-35.4.6.6_user_466001420.bin" but i changed it to "update.bin" and it didn't work.
hamza said:
yeah i downloaded the file from amazon site and its original name was "update-kindle-35.4.6.6_user_466001420.bin" but i changed it to "update.bin" and it didn't work.
Click to expand...
Click to collapse
its still not working still showing that error "cannot read file.bin"
hamza said:
its still not working still showing that error "cannot read file.bin"
Click to expand...
Click to collapse
If you have the device via adb (with adb devices command) you can do an adb sideload sure... so in your case I supose, the file is corrupted... better dont rename it... but, if you can connect via adb, you can sideload sure...
pipataki said:
If you have the device via adb (with adb devices command) you can do an adb sideload sure... so in your case I supose, the file is corrupted... better dont rename it... but, if you can connect via adb, you can sideload sure...
Click to expand...
Click to collapse
no file was not corrupted because i downloaded another file from another site and it is showing same error i really cant understand what is happening. Is there any administration need?
hamza said:
no file was not corrupted because i downloaded another file from another site and it is showing same error i really cant understand what is happening. Is there any administration need?
Click to expand...
Click to collapse
did you do adb devices first?... first you have to know if adb can connet with the device... that will be listed with that command... adb devices
if you want send an screenshot with the result of making adb devices
Try to sideload what version of fire os you had before MIUI upgrade. If you had fireos 4.6.6, sideload 4.6.6, if you had 3.6.5 sideload 3.6.5
ozan2 said:
Try to sideload what version of fire os you had before MIUI upgrade. If you had fireos 4.6.6, sideload 4.6.6, if you had 3.6.5 sideload 3.6.5
Click to expand...
Click to collapse
i was having 4.6.6 and i sideloaded this version i am shocked that all things i am doing are totally good but why this error is occuring
hamza said:
i was having 4.6.6 and i sideloaded this version i am shocked that all things i am doing are totally good but why this error is occuring
Click to expand...
Click to collapse
I think that here in my computer I have the original update of Stock Rom, If you want I can upload it to my shared folder...
(left 3 hours and 5 minutes, maybe)...
to be sure that the upload and the download then is rigth, I tell you the exactly weight of file...
1314263238 bytes, you can test if the file you had has the same weight...
pipataki said:
I think that here in my computer I have the original update of Stock Rom, If you want I can upload it to my shared folder...
(left 3 hours and 5 minutes, maybe)...
to be sure that the upload and the download then is rigth, I tell you the exactly weight of file...
1314263238 bytes, you can test if the file you had has the same weight...
Click to expand...
Click to collapse
Size of my file is 1.2 GBs which is approximately equal to your file as you told me. I actually download it from amazon original site not any third party site but yeah upload it and please give me the link i will surely be thankful to you. I really appreciate your help and really happy to be new here at Xda developer.
hamza said:
Size of my file is 1.2 GBs which is approximately equal to your file as you told me. I actually download it from amazon original site not any third party site but yeah upload it and please give me the link i will surely be thankful to you. I really appreciate your help and really happy to be new here at Xda developer.
Click to expand...
Click to collapse
is uploaded totally...
the url of shared folder is in my Lollipop thread...
Are you accesing sideload by recovery?...
sideload only works invoked in recovey of the phone, in safestrap or in stock recovery
pipataki said:
is uploaded totally...
the url of shared folder is in my Lollipop thread...
Are you accesing sideload by recovery?...
sideload only works invoked in recovey of the phone, in safestrap or in stock recovery
Click to expand...
Click to collapse
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
hamza said:
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
Click to expand...
Click to collapse
Try using another wire and/or another port and/or another file... (the original stock that I had is in my shared folder, that one for exemple or any other one)... I hope you could relive it...
pipataki said:
Try using another wire and/or another port and/or another file... (the original stock that I had is in my shared folder, that one for exemple or any other one)... I hope you could relive it...
Click to expand...
Click to collapse
Thank You so much for your such response got it okay the problem was i didn't unblock the update file which dont know earlier but as you reffer me another link i worked on it and i got my phone back. Once again thank you so much it was really nice to be here. I will suggest all my friends your site.
hamza said:
Thank You so much for your such response got it okay the problem was i didn't unblock the update file which dont know earlier but as you reffer me another link i worked on it and i got my phone back. Once again thank you so much it was really nice to be here. I will suggest all my friends your site.
Click to expand...
Click to collapse
you can go to mobile shop and it will cost only 200 to 300 rupee for software, i also had this issue (soft brick) then i tried alot but finally i go to mobile shop and install the software ..
hamza said:
Yes I am accessing it through phone recovery because i cant turn my phone on thats why i cant use safestap thats why i put my phone on recovery mood and selects install from adb option then from laptop i open console by pressing nd holding shift and right click and selecting open command prompt where my original amazon rom is placed then i use to write the sideload command which is adb sideload <filename.bin> and the then it shows error *cannot read <filename.bin>
That is all the procedure what i do everytime and it get failed please let me know if i am doing any thing wrong in it. Thank you
Click to expand...
Click to collapse
Hello,
This may be a stupid question but did you specify the proper path? ie: c:\'filename"
just a shot, good luck
slim1001 said:
Hello,
This may be a stupid question but did you specify the proper path? ie: c:\'filename"
just a shot, good luck
Click to expand...
Click to collapse
Yes man, his phone is recovered and I had this error, solution for "cannot read" is here: https://forum.xda-developers.com/fire-phone/help/adb-sideload-error-read-t3634246