I used to have a HTC Blackstone: Touch HD but I could not get used to not having a keyboard so I got the HTC Touch Pro 2 instead.
I had a Dutch Windows 6.5 (found on this forum) and HDWalls and everything. I wonder can I just install the same Windows 6.5 and HDWalls and do the HSPL again, the same way I did on the HT HD Touch.
Or do I need to research and download everything from scratch?
Thank you so much.
No, you must use the roms from this section on your rhodium. So start from scratch and read a lot
HDwalls can be used on any windows mobile device.
Ah, ok thank you so much, I was worried you were going to say that.
Oh, well...I will start reading
Related
Check this out
http://www.htc.com/www/product.aspx?id=46294
does someonae has the new HTC touch 3d........-----
I WANT IT.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
isnt it only for htc touch diamond?
It isn't out yet. The 3d Touchflo Interface debuts with the HTC Diamond. Should be out by June/July.
I forgot to mention that the 3d Touchflo Interface demands better hardware and memory than most of the devices any of us has currently. The chances that it will run smoothly with our devices are very slim.
I think its a little sluggish on Touch Diamond itseld from what Ive heard from some of those who attended the press event.
Imagining it on Artemis could only be a joke.. It requires a GPU. And it also looks like this application has a lot of locks preventing cookers from porting. But still XDA-dev has much better hackers to overcome those. Lets wait for the devices on the market first.
Regards,
Carty..
here is a couple of words...i'd like to have 3d,but i suppose its not possible
However, a TouchFLO 3D upgrade for current HTC Touch smartphones (like the Touch, Touch Dual or Touch Cruise) isn't planned due to increased and changed hardware requirements.
Click to expand...
Click to collapse
if this was called HTC manila when it was in the development stage then i hav a ver of this(cab file) which is meant for VGA screen PPCs only
fair does that phone looks stunning,i was gonna get the orbit 2, but the diamond is much faster and better looking, quite looking forward to this one
After see Pontui Home runing so smoothly on my Artemis, I have a little hope that this programa will not demand a Hi-end hardware to run. I HOPE!!!
....
working man said:
After see Pontui Home runing so smoothly on my Artemis, I have a little hope that this programa will not demand a Hi-end hardware to run. I HOPE!!!
Click to expand...
Click to collapse
that same . too
CAB File
Can you post this CAB file?
sheennick123456:
if this was called HTC manila when it was in the development stage then i hav a ver of this(cab file) which is meant for VGA screen PPCs only
Click to expand...
Click to collapse
HTC manila AKA touch flo 3D
here you go
http://www.4shared.com/file/47016031/5436a738/manila1001030release.html
i checked it........it is the same user interface tht is in the htc diamond
but remember it is only for VGA ppcs n wont work on artemis
some people hav tried it on various VGA ppcs n the app runs only on HTC made ppcs(doesnt work on O2 XDA flame)
u may get framerates like 10-15fps
I have a X50v that's with my friend. I'll make a try...
Hi, In this thread:
http://forum.xda-developers.com/showthread.php?t=363500&page=14
a developer called dobb try to adapt the manila VGA to QVGA and release a version alpha and beta that works in the qvga devices but obviously run slow and need to adapt the soft buttons. You can install the cab of VGA version and the dll's, thus overwrite the files in manila folder with the alpha or beta version of QVGA.(This version need to polish more)
The version posted for sheennick123456 was a beta of touchflo3d leaked in january 2008, and with greater reason, the actual version should run faster.
I have no doubt that any developer here not only achieved by extracting the touchflo3d but also the driver to run correctly.
Think about that:
When "Touch" released, HTC said the touchflo could only run on those Devices because of the special hardware (screen), but there are many of us who run the touchflo in our Artemis without such hardware (screen).
Greetings
really it isn't working... i installed it and i don't know how to uninstall.. anybody??
it creates a folder named manila somewhere in the device memory
i dont recollect the exact path but i guess it is in the my documents
all u have to do is delete this folder
If you want to uninstall you have to:
delete the folder in Program Files/Manila
delete all registry in HKLM/software/microsoft/today/items/manila
delete manilatoday.dll in windows folder
I tried in my artemis and works slowly but the second beta needs more work.
ryomahino said:
If you want to uninstall you have to:
delete the folder in Program Files/Manila
delete all registry in HKLM/software/microsoft/today/items/manila
delete manilatoday.dll in windows folder
I tried in my artemis and works slowly but the second beta needs more work.
Click to expand...
Click to collapse
that's what i did on "blind" thanks anyway... let's hope that some of the "gods" over here will adjust it for Artemis
Dont works on Kaiser WM6....
I have one, battery sucks. it's ok kinda hard to get around
cvenk said:
Check this out
http://www.htc.com/www/product.aspx?id=46294
does someonae has the new HTC touch 3d........-----
I WANT IT.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I have one it'ss hard to move around and remember keys, battery sucks too,
I have an HTC Touch and im new at all this phone stuff. I downloaded Windows Mobile 6.1 from Microsoft but there's no changes on my phone. Can someone help me out?
http://www.microsoft.com/windowsmobile/6-1/default.mspx?WT.mc_id=wmhome_WM6_1
West650 said:
I have an HTC Touch and im new at all this phone stuff. I downloaded Windows Mobile 6.1 from Microsoft but there's no changes on my phone. Can someone help me out?
http://www.microsoft.com/windowsmobile/6-1/default.mspx?WT.mc_id=wmhome_WM6_1
Click to expand...
Click to collapse
You have downloaded it from the Microsoft website?
Well, yea I did. But now it sounds that there is no official 6.1 update for some phones. I don't know, im new to this stuff.
Mh, there is no choice for a download from microsoft. Are you sure you download an update to Windows Mobile 6.1 and NOT to Windows OFFICE Mobile 6.1?
Like here: Microsoft Office Mobile 6.1: Upgrade
Later there will be an update also for the HTC touch but not now...
Hey, what you've downloaded is a smartphone edition. Your HTC Touch requires a Touch-screen version, which is known as the 'Professional' edition eg. WM 6.1 Professional. You should go to the 'Elf' section in this forum instead of this. This section is for users who do not possess a HTC-built Windows Mobile devices.
itsukileung1991 said:
Hey, what you've downloaded is a smartphone edition. Your HTC Touch requires a Touch-screen version, which is known as the 'Professional' edition eg. WM 6.1 Professional. You should go to the 'Elf' section in this forum instead of this. This section is for users who do not possess a HTC-built Windows Mobile devices.
Click to expand...
Click to collapse
so an HTC touch is not made by HTC?
=p
no, this section. its in general discussion and is called unlocking modifying and upgrading. its for like dell, asus and other makers who arent htc, but need somewhere to mode and post their roms. i wold head here if i were you
http://forum.xda-developers.com/showthread.php?t=366424
and if your touch has 128mb ram, its called an elfin, and if it has 64, its called an elf. its very important u dont get them mixed up.
the amount of ram you have can be found by going to settings, then the system tab then device information
Hope ive helped
and remember to use the search button in the top left.
Rory
i have a htc touch for half a year now.
i have the mobile shell 2.1 customized in the diamond style. it works a lot better. but i have a question:
my brother did get his new diamond this week.
can i go to my computer then to my phone and copy all the files from his diamond (including the windows on his phone) and replace all these files on my touch?
so i get his windows and diamond settings directly and original (stock) on my touch?
is there anyone who has an answare for my question?
thanks a lot
nope
the diamond's files are cooked into the rom, assume a vga screen and different hardware, and 3d acceleration
so i suppose you could, but nothing would happen
are you GSM or CDMA. if you are CDMA then go to ppcgeeks there are people there working on porting all that we can from the diamond.
whats the diffirence between gsm and cdma? sometimes i get lost in all these names for those phones: touch, elf, pda, pocket windows etc....
but now that i thought myself about my question:
the phone needs to be activated befor you can connect to the pc. when you try to overwrite it says cant copy because "......" is already in use.
its damn. because i like the elf very much and also the diamond windows
thanx a lot
RC_jos said:
i have a htc touch for half a year now.
i have the mobile shell 2.1 customized in the diamond style. it works a lot better. but i have a question:
my brother did get his new diamond this week.
can i go to my computer then to my phone and copy all the files from his diamond (including the windows on his phone) and replace all these files on my touch?
so i get his windows and diamond settings directly and original (stock) on my touch?
is there anyone who has an answare for my question?
thanks a lot
Click to expand...
Click to collapse
you are quite genius for this idea!!!
there is no other like you
hi
like title says is there something out for wm6.5
cause when i use wvgafix3 nothing happens im
on miris v13 rom
thanks ShizeT
shizet said:
hi
like title says is there something out for wm6.5
cause when i use wvgafix3 nothing happens im
on miris v13 rom
thanks ShizeT
Click to expand...
Click to collapse
hi ShizeT
what do you mean when you say nothing happens do you just get a blank screen on startup of your mobile?
a little more info would make a world of difference for users here to help you further.
also i have issues with wm 6.5 on my htc touch hd, my main problem is that the colours are all messed up and it keeps reseting also there is no radio in the rom which is highly frustrating
I think he means that WVGAFIX3 doesn't work on his WM6.5 ROM...I haven't used the program itself so try hunting in the WVGAFIX thread...I guarantee you that there are people who have tried what you're trying.
@HTCFAILEDFLASH: what you're describing sounds like the old "i still have SPL 1.14" problem. If you look at the stickies in the ROM thread, there is a very detailed explanation of how to flash your ROM up to SPL 1.56, which is what is required for most ROMs these days. Alternatively, you can just use HSPL 1.56 from Olinex. But I would probably suggest following the sticky and using USPL - it's safer =P
thanks for the reply
my problem is when i hit vga the changes and then it goes back
to wvga whit nothing changed
i will try to find something in the wvga fix thread thanks
thankyou soo much skullk3r it worked finally now i would have been up all night trying to figure it out
So did you get WVGAfix in Windows Mobile6.5 to work? If so help Dudes..
Me too, I have HD2 and would like to play Arvale: Short tales (VGA) in full screen.
not working here either stays always in WVGA mode . So the screen size doesnt change to VGA.
WOuld love to try Mini vMac on Win Mobile 6.5
WVGAfix doesn't work on WM6.5
so there is no way in chaging screen size in WM 6.5 right ?
Sorry for asking, Im new to WM.
or is there a mini vmac wvga version?
WVGAFix4 seems to be able to change the screen to VGA and that works fine. BUT when you switch it back to WVGA the phone become inoperable until you reset. You can only reset by taking out the battery or using the little red reset button inside the case.
So it SORT of works with 6.5. If there's something you absolutely love to play that requires VGA and don't mind resetting the phone then I guess it's an option.
This is WVGA fix 4 that I'm talking about. I haven't tried 3.
***EDIT***
I installed SPB Mobile Shell 3.5.3 and WVGAFix4 works perfectly. So it seems that it's HTC Sense that can't handle WVGAFix4. SPB Mobile Shell properly adjusts to the VGA setting, and then properly recovers back to WVGA setting. Yay!
Has there been a cooked WinMo Pro rom for the dash? I was trying to install Fennec onto my Dash with the 3vo 6.5 rom and it is not working. Checked the site and it is for WinMo Pro. Any help would be appreciated.
I used to try fennec, but it didn't work on DASH! Fennec is for Windows Mobile Pro (on POCKET PC with touch screen). DASH uses Windows Mobile Standard (for non-touch mobile). So, I think there's no one cook WinMo Pro for Dash! Sorry for my poor English!
I don't think you should be trying to flash a rom for ppc into a smartphone unless your trying to brick your phone! just a thought!
roloracer said:
I don't think you should be trying to flash a rom for ppc into a smartphone unless your trying to brick your phone! just a thought!
Click to expand...
Click to collapse
Oh, I guess that is why there was no courser like on Skyfire, I need a touch screen device for it to work. Thanks.