I was hoping to find some help here but i may have a brick. originally i tried to install android on my telus htc touch (vogue) and was unsuccessful. The linux screen came up and pushing dpad did nothing, tried other button as mentioned in forum step by step but no dice. Now I am trying to revert back to original setup but finding difficulty because after flashing rom then hard reset all I get is white telus screen and nothing else. anybody got a suggestion so I can either boot android or go back to original wm config.thanks in advance
Related
I am no stranger to forums, or 'modifying' electronics. However, this was my first hack at my Touch Diamond. I went through all the proper procedures to update to WM6.5 (or so it seemed) but now, after installing a ROM
(http://forum.xda-developers.com/showthread.php?t=506533)
the phone only shows the splash screen, then resets and continues to go through this continuous loop. I cannot access the phone, or get booted to the point where I can connect to the PC. Any ideas, as I am sans phone right now. TIA!
Do you flash a hard-SPL ?
Are you sure the ROM's archive isn't broken ?
The connection on the bootloader mode was good, synced with windows?
I think you didn't flash a rom before ? If yes, no problem, if you flash an other rom before, maybe use the MTTY method.
see how this guy could have saved him self time if the thread in my description was stickyed...
MTTY thread... look there. after that ur green to go again.
I do believe people are successfully using the ROM.
The connections were all fine. I had to first install a new bootloader, then updated the radio device (all worked fine). I then went to update the OS, and the process went through just fine, but when the phone booted, it just keeps cycling through the opening splash screen.
My problem is that I cannot get the phone past that screen to do anything.
reb0rn, thank you! The 'boot to flash' was what I was looking for. The 'Volume Down" with "Power On" was what did the trick (I was doing all sorts of other combinations with the 'reset' key).
I'm loading a new version onto the phone as we speak - wish me luck, and thanks again!
2 days ago i was playing with my touch diamond and it held when i switched on WIFI (wifi was working fone for a year now). When i rebooted the phone froze at the screen where Touch Diamond is written and at bottom right some info regarding ROM/Radio/SPL etc (R 1.09.25.23 G 52.51.25.26H D 2.03.00.00).
Tried many times but couldn't boot it . Just when i was about to get hopeless it started booting if i hold volume down, enter and press reset pin on the screen still taking too long. As i had stock HTC ROM so i upgraded it to the latest to see if it solves the problem. After upgrade phone would still boot randomly by trying the Reset pin and the mentioned button but after a few trys that also stopped working.
Now the phone is stuck on the same black screen, i can only resintall the latest Rom and All the way mentioned on the forums dont work for me i have tried signed unsiged soft and hard spl or direct Custom ROM upgrades but nothing goes beyond 0 %.
All the SPL upgrade articles require to copy jump spl. exe to the phone but i can do that as i am unable to create a Active Sync relationship (Eventhough i have tried upgrade by manually going into the tri color screen by holding volume down button while booting it).
The Hard Reset option allows me to hard reset but has no effect on the phone's condition.
anybody who could help me out here?
Hi all. I do not post much on here and am relatively new with this so please bear with me if it is in the wrong forum and if I explain something that is worded incorrectly.
I rooted my phone following the 2 part video series I found on here and all was going well until I tried to place the following theme on it:
[THEME] MattedBlues - CM 6.0.0 and Sense 2.2 Versions *UPDATED 09/13/2010*
I rebooted after flashing it through the recovery screen and cannot get it to boot into the home screen at all. As stated in the title, I see the Sprint splash screen and then the 4G screen to start. It then sits there for a few seconds and then starts back at the Sprint splash screen again.
Any help would be appreciated as to what I can do to get back to where I was and also possibly tell me what I may have done wrong to cause this.
Thanks in advance!
eaglenest608 said:
Hi all. I do not post much on here and am relatively new with this so please bear with me if it is in the wrong forum and if I explain something that is worded incorrectly.
I rooted my phone following the 2 part video series I found on here and all was going well until I tried to place the following theme on it:
[THEME] MattedBlues - CM 6.0.0 and Sense 2.2 Versions *UPDATED 09/13/2010*
I rebooted after flashing it through the recovery screen and cannot get it to boot into the home screen at all. As stated in the title, I see the Sprint splash screen and then the 4G screen to start. It then sits there for a few seconds and then starts back at the Sprint splash screen again.
Any help would be appreciated as to what I can do to get back to where I was and also possibly tell me what I may have done wrong to cause this.
Thanks in advance!
Click to expand...
Click to collapse
You need to pull the batter hold down the volume button and hold the power boot into recovery. Go to USB mode copy over another ROM and reflash. OR restore the backup you should have performed before you flashed the theme being new I doubt you did this step.
Thanks for the quick reply!
Yes, you are right...being a noob I did not do the backup but believe me once I get this back up and running, that will be the first thing I do!
About your other suggestion, I tried to reflash with the unrevoked-forever and it still keeps doing the same thing. Should I wipe the cache out and reflash or is that not the problem here? Also, what other ROM would you suggest to be a good starter for someone new such as I am?
Thanks again!
Well, I decided to do a data wipe and reflash with a different Rom and it is now working.
Thanks!
zone23 said:
You need to pull the batter hold down the volume button and hold the power boot into recovery. Go to USB mode copy over another ROM and reflash. OR restore the backup you should have performed before you flashed the theme being new I doubt you did this step.
Click to expand...
Click to collapse
I am experiencing the same problem. using clockworkmod v2.0.2.3 how do you get to usb mode?
So I was running Cyanogen 7.0 for a couple weeks now and have tried a few others. I downloaded it with clockworkmod and everything was fine until I updated it to the newest one and while it was updating my phone died. Now it is just stuck in blue boot screen with the arrow going around and around. I tried Hboot but every one I pick including recovery, clear storage, and factory reset just gets me stuck on Dinc white boot screen. Trackball isn't responsive here so I us power and when I try to boot with up volume or both up and down with power it just vibrates a couple times and doesn't do anything. (I have to pull battery after this to Hboot or boot with stuck C& screen.) Please help! I have been reading so many threads on here and Cyanogens forums and everyone else seems to fix it with recover from hboot or clockwork recover comes up for them. I am very stumped. I have had a rooted captivate, EVO, and tried moto atrix and back to captivate before deciding to try out Dinc (and verizon)
I had that problem a while ago. I recall using the the in revoked program all over again. Hope that helps
Sent from my ADR6300 using XDA App
the only solution that I would think can work on this case if going back to stock.. since you said you can get in the HBOOT.. you could be able to go back to stock and then reroot you phone again... I was on similar situation once I flash the alternative recover in RM... and I couldnt get to the Recovery and I had to go back to stock by putting the PB31IMG in the HBOOT to get it working..
You can get the link here..
Code:
http://dougpiston.com/?page_id=108
How do I go back to stock by putting the PB31IMG in the HBOOT?
wolfmanb said:
How do I go back to stock by putting the PB31IMG in the HBOOT?
Click to expand...
Click to collapse
Download the file and place it on your sdcard once you get to the HBOOT its gonna ask you if you wanna update.. then just vol - for yes and you are good to go...
Similar Problem
I am facing a similar situation with my Incredible. I was running CM7.0.3 when my phone randomly restarted but only got to the white "HTC Incredible" screen before looping over again.. and again..
I have tried loading the stock image (used the files from dougpiston site) as well as others through the HBOOT but I still cannot get past the "HTC Incredible" boot screen.
Is there something that I am missing? Does anyone else have a suggestion? I know it isn't bricked since I can still get to the HBOOT but I just can't seem to get it to boot an image. I did notice it is still "S-Off" if that matters.
If you cannot get into recovery and flashing a recovery from hboot doesn't work, you may need a new phone. This was mentioned in another thread somewhere recently.
Make sure your sd card is formatted to fat32.
Hi there! Long time user but this will be my first post as I've exhausted all options. A while back i rooted my G3 on marsh mellow, everything was fine until one day it entered a bootloop in my pocket. I went about using the TOT method on androidrootz (I'm not allowed to post urls yet) to revive it as my recovery seemed to have been erased during the bootloop. After much trial and error I got the LG Flash tool to work! but not completely Using upgrade dl gives me the 3 at the end but then continues to bootloop, I tried doing a manual factory reset but it only flashed the factory reset screen and then continued into the boot loop. Another method suggested was to use Board dl, I also had success with that but I brings me to a new problem. After finishing the flash tool it boots to the mini OS and displays Auto Touch Test: Dont' touch the screen! but the screen is completely unresponsive and I can't even tap okay to clear the window. Holding down the power button while tapping does nothing and a manual factory reset doesn't either! So I'm stumped, any help would be appreciated! I feel like I'm so close to having it fixed but i just need that one piece. I either need to solve the bootloop with upgrade dl or the unresponsive mini OS with board dl.