Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Go back to your Original WM5 Rom First. Then flash again using SSPL-Trin.exe
Atoo509 said:
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Click to expand...
Click to collapse
Atoo509 said:
Read all and have started this cause nothing works as yet.
The only ROM to flash is the Offical WM6 but it sticks at 28% everytime.
Here's what the screen shows.
TRIN100
IPL-1.00
TRIN100
SPL-9.99.CP
Not even detected in Activesync or Windows Mobile centre.
Can you guys help me.
PS tried SD method but does nothing, soft reset and hard do nothing and old AX3L ROM wont even start as well as HARDSPL SSPL CID Unlock and I mean everything.
Do I have to get someone, eg pay, to get it fixed???
Where to from here????
Click to expand...
Click to collapse
You should feel the need.......
the need to read.....
This one is so heavily documented in this forum - it's resolution should be straightforward. Just read...
nealed said:
You should feel the need.......the need to read.....
Just read...
Click to expand...
Click to collapse
Seems to be more difficult then asking question !! Too bad
to nealed
Cheers mate,
Well tried to flash WM5 ROM (Original that was on my 810 prior to cooked ROM) however it still comes up with the data connection error and can't find my Dopod. Maybe all the information is too much in the forum cause I have read all my friend. I would absolutely love you to simplify it a bit for an honest and humble noob that would be great......
Nothing flashes cause im stuck in the tri colur screen.
Please educate me
give some more details of what's displayed on tri colored screen..
next time it gives connection error, just restart the updater (with device still connected).
Racerx
You have provided me with the most honest feedback and I thankyou. It would now appread that the original ROM WM5 1.23.707.6 for AUS was not able to flash on VISTA however I just started it on XP so finger crossed.
Now when its all good, lol, I need to re-read what needs to be done with the new WM6 update prior to flashing it. Can you give me your clear guidance.... SSPL or HardSPL?
waiting with baited breath.....
ok, if you have any more trouble, it's hard to assess where you're stuck without the details of what's shown on your screen, etc.
to flash WM6 ROM, please follow the instructions at my site here
this will give you basic instructions on flashing it. once you get ready to flash the ROM, you can look at the upgrade guide on the site for picture by picture steps to upgrade.. hope it helps
Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd
yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.
Thanks for that. Time to give it a whirl! Wish me luck!!
Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.
Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd
I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either
Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.
The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F
question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.
Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F
Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!
Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!
Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.
SPL is 1.25.0000
IPL is 1.25.0001
Ideas??
The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.
OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??
fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.
I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.
I have Dhva_ddt V20 installed....
I tried to install omnia slm/touch player...During installation it got hanged...
I did soft reset but after reset it got hanged on splash screen...
After that i tried to falsh new rom by SD card method.. but not sucessful..
It shows IPL / SPL and "serial" at bottom on bootloader...
I tried to connect it to pC here it shows USB at bootom at bootloader but gives an error..."Use new version of RUU"... don't know what to do?
I am trieng from two days and read a lot but noting help...
alex8525 said:
I have Dhva_ddt V20 installed....
I tried to install omnia slm/touch player...During installation it got hanged...
I did soft reset but after reset it got hanged on splash screen...
After that i tried to falsh new rom by SD card method.. but not sucessful..
It shows IPL / SPL and "serial" at bottom on bootloader...
I tried to connect it to pC here it shows USB at bootom at bootloader but gives an error..."Use new version of RUU"... don't know what to do?
I am trieng from two days and read a lot but noting help...
Click to expand...
Click to collapse
downloaded the newest hardspl and flash that, if that doesn't work download the newest shipped from for your phone from the wiki.
here is hardSPL
and here are the shipped roms
or official AT&T rom with radio stripped out (safer)
Tried ATT rom..But it didn't work
alex8525 said:
Tried ATT rom..But it didn't work
Click to expand...
Click to collapse
Then try your official rom. (I put the custom RRU with the striped one).
Should work. If you can get into bootloader tisnt a perma brick.
also see this thread here, looks like the guy solved a problem like yours
alex8525 said:
Tried ATT rom..But it didn't work
Click to expand...
Click to collapse
Try flashing with SD card! Read through wiki to figure out how to flash through SD card.
I have tried SD card method...
But it shows bootloader with IPL / SPL version and "Serial" at bottom...
It dose't load any thing...
I have tried installing ATT official rom also.. but it says use updeted utility to flash....
I am able to go to bootloader and get USB connection when connect to PC....
But I don't have Activesync installe on PC is it a problem??? and I can't install active sync because of some restriction....
How to come out of this?
Is there any way I can Hard reset phone? Without switch on it?
Please help ...M scared....
I have done hard reset and now I m stuck at white screen .....
Is it bricked?
alex8525 said:
I have done hard reset and now I m stuck at white screen .....
Is it bricked?
Click to expand...
Click to collapse
ok, can you get into boot loader, press ok on left, and power on on right, and stick your stylus at the bottom, all together. Plug USB to PC, with boot loader screen, download the ATT rom mentioned here, and start the process. You have to have activesync 4.5 and .net 2.0 on your PC to have this to work.
Also, you have been given a link above for the official ATT without Radio, and here is the exact instructions on how to flash via SD. what part of any of these do you not understand?
Why would you perform a hard reset right after asking about it and not even waiting for an answer? If you had any doubts you should have just waited. I don't know much about your problem but I would't be taking the chance of doing something I wasn't sure about thats for sure. I really hope you can get out of this mess.
what size micro sd have u got. if it is larger than 2 or its a sdhc than you will not be able to flash sd method.
download another recent rom or just reflash the same dvha rom and do it through active sync on pc.
Finally got it working...
After 3 hard reset now I am out of white screen and now its working.
After 3 days
1. on splash screen
2. on bootloader
3. on white screen
Thank you everyone who have replied and who have atleast viewed.
learning:
Activesync is must for flashin through PC
new way to hard reset (thx wiki)
don't panic...your phone will be working sooner or later, if it was not a flshing that hanged it.
by d way i am posting from phone
alex8525 said:
Finally got it working...
After 3 hard reset now I am out of white screen and now its working.
After 3 days
1. on splash screen
2. on bootloader
3. on white screen
Thank you everyone who have replied and who have atleast viewed.
learning:
Activesync is must for flashin through PC
new way to hard reset (thx wiki)
don't panic...your phone will be working sooner or later, if it was not a flshing that hanged it.
by d way i am posting from phone
Click to expand...
Click to collapse
Glad to here you fixed it!
Currently My diamond has the olinex 1.40 unsigned hard-spl. I've to ship it back and try to flash to a stock spl. After flashing to 1.34 the original spl it still says the olinex 1.40 version is on it. What is odd is that the when I start the bat file to go to the bootloader he doesn't response to it, but it will go to the bootloader when i start the flash. I can't start manuely with spl bootloader. Because my touchscreen layer doesn't work at all i'm stuck in the screen calibrate menu. So why doesn't it says 1.34 after flashing it to 100 %.
The phone will be picked up this week but can't send it back like this.
I've read different topics complete but nobody seems to have the same problem.
Just tried stock spl 1.93 and get the same result.
O the bat file didn't work out. So I did a volume down + reset and it just gets to 100% with flashing. but it's keep saying 1.40 olinex. Is it good to do it this way, not that it help but still?
It seems that flashing the hard spl can't be done. So any tips?
Codeaction said:
Just tried stock spl 1.93 and get the same result.
O the bat file didn't work out. So I did a volume down + reset and it just gets to 100% with flashing. but it's keep saying 1.40 olinex. Is it good to do it this way, not that it help but still?
It seems that flashing the hard spl can't be done. So any tips?
Click to expand...
Click to collapse
Did u try with jump SPL and then flash with HardSPL 1.93 or so. Try that. It should work.
Did try it with 1.34 but will now try with 1.93.
ksekhar said:
Did u try with jump SPL and then flash with HardSPL 1.93 or so. Try that. It should work.
Click to expand...
Click to collapse
Thanks for the reply
it should work indeed but still doesn't. Before this I never had any problems with it, but again after flashing it keep saying 1.40Olinex even with the jumpspl.
Now something else
helo
to change the spl ..
to hard or stock spl
you must flash this with diamond conected to pc....
you can´t flash you device fron 3 color bars
try to conect your device to pc (power up you device, and when it says to calibrate your screen conect your device to pc)
if you want more advice pm me
Does anyone at least knows how to ignore the first "touch the device message screen" and screen settings so I can flash with the manual sspl boot exe
Codeaction said:
Does anyone at least knows how to ignore the first "touch the device message screen" and screen settings so I can flash with the manual sspl boot exe
Click to expand...
Click to collapse
U dont need to use touch screen to go to bootloader mode.
press soft reset with stylus and press volume down button. You should be in bootloader screen.
Try flashing with hardspl again....
ksekhar said:
U dont need to use touch screen to go to bootloader mode.
press soft reset with stylus and press volume down button. You should be in bootloader screen.
Try flashing with hardspl again....
Click to expand...
Click to collapse
That's true, but the thing with it, it doesn't work to flash the spl. When I flash like that is will not chance the spl.
Is there a way to flash the spl without using the sspl-manuel.exe ?
Come on people, it will be picked up tomorow.
Is there a way to update the spl if the automatic mode doesn't work and the sspl-manuel can't be opent because i'm stuck at the press screen message. So is it posible to open the sspl without the obove options.
I have the same problem. Solution is next. Put file named welcome.not in the root directory of Diamond. This file must be clear - 0 bytes. Then softreset it. After SR you will not see calibration message. And will be able to spl your device. Good luck!