Develop Bugs

Successfully unrooting?

So I've had my evo for 2 days and am already having trouble resisting rooting it. However, do we know that unrooting through the RUU is 100% successful. There have been some issues with the evo (like the screen peeling up) and I wanna make sure I can exchange if I need to. (although I wouldn't HAVE to unroot to exchange, it provides some peace of mind). So anyway, I remember on the hero there was the all too common error 110 which I ran into and bricked my first one before a fix came up. So anyone successfully RUUd back to stock? Any errors anyone has heard of?

i did 2 with no problem 1 using the ruu with thye computer the other using the zip from the ruu and flashing it as a pc36img.zip file. both work 100%

red man said:
i did 2 with no problem 1 using the ruu with thye computer the other using the zip from the ruu and flashing it as a pc36img.zip file. both work 100%
Click to expand...
Click to collapse
Awesome, thank you. Do you or anyone else know if there are different RUUs. I bought mine a few days ago which came pre loaded with the firmware update, I remember there was a 1.29 and a 1.56 RUU floating around for the hero and you had to use what came pre loaded on your phone. Is this the same case, or does the RUU contain this update already and will it just work on all evos?

Go to this page. It has the stock RUU and the RUU with the first OTA update in the first section.

Dave2582 said:
Go to this page. It has the stock RUU and the RUU with the first OTA update in the first section.
Click to expand...
Click to collapse
Thank you sir! I am correct in assuming it was shipping with the OTA if I wasn't able to find any firmware updates through the phones settings right?

Well, I picked up the EVO for my dad on launch day, and when they booted it up in front of me, the screen was already showing that there was an update available. So the phone that you just got, already had that particular RUU on it.

Dave2582 said:
Well, I picked up the EVO for my dad on launch day, and when they booted it up in front of me, the screen was already showing that there was an update available. So the phone that you just got, already had that particular RUU on it.
Click to expand...
Click to collapse
Sounds good. Thanks again.

[REQ][HOW TO] Relock or Unroot EVO

I have been searching the web for how to relock my EVO. This is because i am taking it back to sprint for a screen fix and I have learned from the PPCGEEKS thread all the problems and warranty stuff related to rooting as well as the odds of them discovering that I have rooted it. I just don't want to risk it and I would like to know how to relock, just for the knowledge.
Does anyone have specific instructions how??
PPCGEEKS Thread: http://forum.ppcgeeks.com/showthread.php?t=126849

http://shipped-roms.com/shipped/Supersonic/
Download first and last, and flash in the same sequence.

So thats all?? its done? It's unrooted? That seems simple.

Yep, that's how easy it is.
On some phones (one out 5 I "control") I had to get all 3 and flash in the same sequence, otherwise last one wouldn't flash over the first - not sure why.

redsolar said:
last one wouldn't flash over the first - not sure why.
Click to expand...
Click to collapse
that surprises me. the latest RUU should flash over anything *theoretically*.
what error did it give you when you attempted?
yes, it should be easy to restore the phone to stock. think of all their service departments fixing/refurb'n phones. one simple flash and its all completely stock no matter what was loaded before.
for those more technically included, since this is the dev board, if the eng build RUU is loaded the PRI is downgraded and as of now, no currently released RUU is able to upgrade the PRI ... but thats such a small issue, can almost guarantee nobody will notice.

Damn screen... I have to do the same thing, and just one other question, besides those files I will just have to use Htc Sync to flash them right?

Yellowcard8992 said:
Damn screen... I have to do the same thing, and just one other question, besides those files I will just have to use Htc Sync to flash them right?
Click to expand...
Click to collapse
Those RUUs are just exe files. So sync will provide you with drivers yes, but after downloading you just run from that download with your phone plugged in.

wow after reading that thread on ppcgeeks i dont think i ever want to leave xda! must be a young crowd over there. i ran the latest 1.47 RUU that i downloaded from HTC before I returned my phone. much to my surprise they didn't even take the phone out of the box! still, since it only takes 10 minutes might as well do it.

barnacles10 said:
Those RUUs are just exe files. So sync will provide you with drivers yes, but after downloading you just run from that download with your phone plugged in.
Click to expand...
Click to collapse
are you talking about just using the volume down and power button method?

redsolar said:
Yep, that's how easy it is.
On some phones (one out 5 I "control") I had to get all 3 and flash in the same sequence, otherwise last one wouldn't flash over the first - not sure why.
Click to expand...
Click to collapse
whats the point in running all 3 on a phone you are returning? just running the first one is good enough to unroot and restore to stock. i only ran the most recent one, because i had already upgraded the baseband and was unable to run the earlier ones because of it.

joeykrim said:
that surprises me. the latest RUU should flash over anything *theoretically*.
what error did it give you when you attempted?
yes, it should be easy to restore the phone to stock. think of all their service departments fixing/refurb'n phones. one simple flash and its all completely stock no matter what was loaded before.
for those more technically included, since this is the dev board, if the eng build RUU is loaded the PRI is downgraded and as of now, no currently released RUU is able to upgrade the PRI ... but thats such a small issue, can almost guarantee nobody will notice.
Click to expand...
Click to collapse
I was surprised too when I tried first.
The 1.47 RUU just sat on the "waiting for bootloader" screen and timed out after ~90 seconds, "unable to find phone" (tried multiple times) and the screen would get stuck in white bootloader/RUU message (battery pull required) - so i am guessing 0.76.2 bootloader was too low for it. That was flashing from 3.2.2+ DamageControl ROM, didn't try from any other one, since the DC -> 1.36 -> 1.47 stock worked well.
And yes, the PRI caveat is there, but as joeykrim said, that's minor, plus you can always say "PRI what - huh?", right?

OneStepAhead said:
whats the point in running all 3 on a phone you are returning? just running the first one is good enough to unroot and restore to stock. i only ran the most recent one, because i had already upgraded the baseband and was unable to run the earlier ones because of it.
Click to expand...
Click to collapse
Running latest OTA makes you seem more of a "dumb user" who wouldn't even know what root is?

Yellowcard8992 said:
are you talking about just using the volume down and power button method?
Click to expand...
Click to collapse
No. RUUs are handled differently. You download the file. And run it on your computer with the phone plugged in. It does everything for you. You DO NOT flash these via recovery.

Update on my phone
I took it to the sprint store yesterday and against everything I have heard the guy at the store turned my phone and checked it. Thank god I used redsolar's posted method. I must have the appearance of someone who would root there phone. It passed his inspection, luckily.
Thanks for the help

I rooted with the new Simpleroot OTA Edition, with Fresh Rom 053, and RA-Rec.
I'm trying to start over from stock so I can re-root my phone, but I can't get the RUU's to work. The oldest one will actually try and put the phone in bootloader, but while its waiting for bootloader it eventually just stops and gives me the 170 error, usb connector problem.
So is there any other way to go about this? Any help would be greatly appreciated.

murdercitydan said:
I rooted with the new Simpleroot OTA Edition, with Fresh Rom 053, and RA-Rec.
I'm trying to start over from stock so I can re-root my phone, but I can't get the RUU's to work. The oldest one will actually try and put the phone in bootloader, but while its waiting for bootloader it eventually just stops and gives me the 170 error, usb connector problem.
So is there any other way to go about this? Any help would be greatly appreciated.
Click to expand...
Click to collapse
ya what I do is replug the usb coord then try ruu again while the phone is stuck on the HTC sign,then if that doesn't work I just manually go into bootloader myself (power+volume down) then use the ruu.exe, works everytime but then it tells me my current version is not valid, so if you ota'd you probably won't ever be able to go back to 1.32.651.1/.6 stock but you can just use the new 1.47.651.1 ruu to regain stock after ota.

Tundricles said:
ya what I do is replug the usb coord then try ruu again while the phone is stuck on the HTC sign,then if that doesn't work I just manually go into bootloader myself (power+volume down) then use the ruu.exe, works everytime but then it tells me my current version is not valid, so if you ota'd you probably won't ever be able to go back to 1.32.651.1/.6 stock but you can just use the new 1.47.651.1 ruu to regain stock after ota.
Click to expand...
Click to collapse
Thanks a **** load Tundricles, you saved my ass.
I was getting so pissed, I'd run the RUU and once it got to opening the bootloader on my phone it was get frozen on the HTC screen, and the RUU would get the use connection error. So I unplugged my phone, and noticed it was in the bootloader, but if the usb was plugged in, it wouldn't show the bootloader screen for some reason. So I just plugged it back in and started the RUU back up, it instantly went past the "Waiting for bootloader..." message and started updating.
Thank you, and for anyone else having similar problems, READ THIS!

Flashing the RUU doesn't restore the stock recovery does it?
I ran Unrevoked 2 a while back and I have RUU'd but I'm pretty sure Clockwork Mod is still there.
Sent from my EVO 4G using the XDA App.

ViViDboarder said:
Flashing the RUU doesn't restore the stock recovery does it?
I ran Unrevoked 2 a while back and I have RUU'd but I'm pretty sure Clockwork Mod is still there.
Sent from my EVO 4G using the XDA App.
Click to expand...
Click to collapse
It should. RUU replaces everything but PRI
Sent from my PC36100 using XDA App

murdercitydan said:
Thanks a **** load Tundricles, you saved my ass.
I was getting so pissed, I'd run the RUU and once it got to opening the bootloader on my phone it was get frozen on the HTC screen, and the RUU would get the use connection error. So I unplugged my phone, and noticed it was in the bootloader, but if the usb was plugged in, it wouldn't show the bootloader screen for some reason. So I just plugged it back in and started the RUU back up, it instantly went past the "Waiting for bootloader..." message and started updating.
Thank you, and for anyone else having similar problems, READ THIS!
Click to expand...
Click to collapse
np glad I could help

[Q] Can anybody help me out, please?

I've searched the forums and have not found a situation that really matches mine.
I've been running on a Cyanogen nightly build for probably two months with no problems. Out of nowhere this morning my phone reboots itself (while it was idle; I wasn't even touching it) and then gets stuck in a boot loop. I get the White HTC Evo 4G screen, then it powers off and comes back up to the white screen again. Over and over.
All I can get do is hboot. Even telling hboot to go into the recovery mode puts my back into the boot loop. Fastboot, clear storage, and hboot usb all seem to work though. I've tried downloading the PC36IMG.zip file (http://forum.xda-developers.com/showthread.php?t=780141) in that thread, but hboot loads it and tells me that it is older than my current version, and only gives me the option to reboot, or not to reboot. Doesn't load the image.
Here is the information on my hboot screen:
SUPERSONIC EVT2-3 SHIP S-ON
HBOOT-0.97.0000
MICROP-041f
TOUCH PANEL-ATMEL224_16ab
RADIO-2.15.00.09.01
Aug 19 2010, 14:29:08
Anybody have any ideas? Thanks!

you lost root, s-on
you can still start the bootloader so it's not a brick
need to get s-off before you can load recovery again and reflash your rom
have you tried the RUU? if it installs and defaults you then you can unrevoked to root

NewZJ said:
you lost root, s-on
you can still start the bootloader so it's not a brick
need to get s-off before you can load recovery again and reflash your rom
have you tried the RUU? if it installs and defaults you then you can unrevoked to root
Click to expand...
Click to collapse
Trying the RUU here now: http://forum.xda-developers.com/showthread.php?t=874091
Wish me luck!

luck has been wished

Kuhmo said:
Trying the RUU here now: http://forum.xda-developers.com/showthread.php?t=874091
Wish me luck!
Click to expand...
Click to collapse
This didn't work. Everything is still the same, except that my hboot version is now 2.10.0001. Any other thoughts?

still won't not into any rom? did you get errors?

NewZJ said:
still won't not into any rom? did you get errors?
Click to expand...
Click to collapse
No, the app on the PC said everything was successful. The progress bar on the phone progressed without errors too.

what happens when you reboot the phone not going into bootloader?

Just the HTC EVO 4G splash screen. Over and over and over...

does it show the boot animation or just stuck on splash?

Just the splash. No animation.

pull the battery, remove your sdcard, put the battery back in, see if it gets to the animation

Doh, you upgraded your hboot. It's alright though, just run the ruu one more time and your should be ok
Sent from my PC36100 using XDA App

Wrong button..

xHausx said:
Doh, you upgraded your hboot. It's alright though, just run the ruu one more time and your should be ok
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I asked my wife to check this thread from the car on the way to dinner. Saw the response. So I took my laptop inside with us and used the RUU one more time. No luck. I decided that it must be a hardware issue. I took the SD out and removed the evidence that the phone had been rooted, then took it to the sprint service center up the road. They just replaced it for me. Thanks for your time! I DO want to root my phone again, the ROMs are just so much better than the stock installation. Should I not install the OTA updates if I'm going to root it? Which guide should I follow for rooting?

never do OTA when rooted, use unrevoked to root, unrevoked.com

NewZJ said:
never do OTA when rooted, use unrevoked to root, unrevoked.com
Click to expand...
Click to collapse
Not when rooted. I meant should I update to the latest OTA UNTIL I decide to do the root again? Is the latest OTA unrootable?

Same deal.
Here is the post that I put in the wrong forum that I was about to post here until I saw this thread...
Wellp. I win.
I win a no expenses paid trip to my nearest Sprint dealer.
Ever since I used unrevoked to root my phone in November, I've been voraciously digging through these forums for tasty roms. I've been snorting lines of Cyanogen, MIUI, and a myriad of other, well-designed roms.
Using a on older version of hboot (pre 1 methinks) I was able to avoid the latest hassles with ClockworkMod (plus, I down(up?)graded to 2.6 via RomManager).
Tonight, as I was enjoying some tasty foodstuffs at my local foodstuff vendor, my phone rebooted. Then, it rebooted again. Then again. I once made the folly of flashing a new rom without running the appropriate wipes, and was no stranger to the bootloop. I patiently fired up hboot (my poor volume rocker is all but wore out) and ordered up the trusty recovery mode.
...then it rebooted again... and again... and again.
PusSidiasus: ONOES! I HAVE THE WTFBBRICKED MY PRECIOUS!
SmartAsSidiasus: Hang on for a second, let's check the internet. Try this link: tinyurl.com/4vgeyeg
PusSidiasus: ...
Unfortunately, my internal dialogues are not nearly as witty. Also, my best attempts to de-brick-ify were for naught. Fastboot gave some wacky error message when I tried to flash a new recovery, and installing via PC36IMG.zip did nothing to improve the situation. I even went so far as to install a stock image someone pulled from an RUU (with a 2.02hboot, so as to avoid wimax woes)...
Still, a whole lotta nothing. I can't do anything beyond hboot, and whatever recovery image I install (Clockworkmod, AmanRa) the machine still bootloops.
At this juncture, I've resigned to taking the phone into the sprint store and playing dumb. It is a stock rom, though I hope the attendant misses the S-OFF bit at boot. Which brings me to my proper question:
1) Has anyone run aground a similar issue and found a way out?
OR...​
2) Anyone know how to turn S-(back)ON in my current situation?​
Any insight would be greatly appreciated. Also, you can rest assured that I'll be rooting again whatever phone I walk away with, and the work that is exhibited in these forums is amazing. Keep churning out wonderful roms and guides.
Sidiasus
(Currently, Sadiasus... )

run the ruu to s-on then trade for another

NewZJ said:
run the ruu to s-on then trade for another
Click to expand...
Click to collapse
Ack, sorry... didn't mention in previous post. I fired up windows to run the RUU (I don't trust wine to that stuff) but it couldn't detect the device.

Please help with unroot, i messed up and and going crazy here.

Ok, I rooted with unrevoked a long time ago. Broke my screen and need to unroot. I followed the unroot unrevoked guide as closely as I could, but the rom in the link was not found. So I downloaded a different ruu.zip of factory rom, don't ask me which one, because I can't find the link anymore, but currently here is where I stand. Hboot kept saying that the img was older or something, and wouldn't flash. So I did a stupid thing and pushed the zip with clockwork. So now I'm running s-on with clockwork recovery and a stock unrooted rom. So, I tried the next thing, downloaded an 3.7 ruu .exe and tried to run that from windows, but it gives me an hboot usb connection error f*ucking **** 1 thing after another.
This is the unrooting guide I used http://forum.xda-developers.com/showthread.php?t=780141
I got s-on, and tried that pc36img but it wouldn't work, originally. Before I went on to screw things up.
I've been at this for hours, something that should have taken 10 minutes if I wasn't an idiot, or bad links, or what ever. Can someone tell me or point me in the right direction, of what to do here, preferably not to a 2 year old thread with outdated links? What should I do?`
A List of android stock RUU zips with radio, pri, recovery all in one would be great, but I give up on trying to find that, its buried or does not exist.
I found this list http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/ROMs but its just the rom not everything.
So here is where my phone stands
S-ON
Hboot .97
Clockwork recovery 2.5.0.7<<<<<<
Android version 2.2.2
Build number 4.54
PRI 1.90_003

Angrychair420 here is a stock RUU that I know is good you should be able to run the RUU from windows.
http://geekfor.me/evo/ruu/evo_ruu_1326511/

thanks, that says its img version 1.32.651.1, assume thats safe to use. I assume thats andoid 3.26 which is what came on my phone. Ugh I'm in over my head. Why did my screen have to break, i was totally happy with CM7 and everything the way it was.
what if I wipe my data and caches, remove SD card, put on a PC36IMG.zip and boot the phone into hboot, will it still give me the older version error?
edit: the link you gave me gives me the same error as the other ruu.exe:
The ROM Update Utility cannot update your android phone
Please get the correct ROM Update Utility and try again

Possibly but I did have to return mine for repair and I know that using it as a .exe file trough windows I had no problem. Not sure about making it into a PC36IMG.zip file though I have not tried it that way.

Angrychair420 said:
thanks, that says its img version 1.32.651.1, assume thats safe to use. I assume thats andoid 3.26 which is what came on my phone. Ugh I'm in over my head. Why did my screen have to break, i was totally happy with CM7 and everything the way it was.
what if I wipe my data and caches, remove SD card, put on a PC36IMG.zip and boot the phone into hboot, will it still give me the older version error?
Click to expand...
Click to collapse
It might. There are 3 PC36IMG files in the first "My Links" link in my signature. You can try them in order if you'd like, if you get the "main version is older" message, but if the first two don't work, the last one definitely will.

Thanks cpt, about to give them a try. Sigh man, this is frustratingly harder than rooting :-D If it was as easy as doing the s-on and copy the pc36img.zip to the root of sd and booting into hboot and DONE, I would of been having a much better day.

Try the latest RUUs from this link man:
http://www.filefactory.com/f/acf0b850b0f70d7b/

Have you tried this?
http://htcevohacks.com/htc-evo-hacks/how-to-unroot-your-htc-evo-4g/
You can also try this
http://www.goodandevo.net/2011/03/how-to-unroot-your-htc-evo-4g.html

I appreciate the help guys. I will keep posted. You know how much it sucks to slide on a touchscreen thats broken? lol
partyman1971 said:
Have you tried this?
http://htcevohacks.com/htc-evo-hacks/how-to-unroot-your-htc-evo-4g/
Click to expand...
Click to collapse
Yes, that's the first RUU.exe I tried. said this RUU can't update
ok i got a pc36img.zip installing from hboot right now.
edit:dang main version is older error. Trying a wipe then hboot then pc36img.zip
Same outcome, main version is older.
partyman1971 said:
Have you tried this?
http://htcevohacks.com/htc-evo-hacks/how-to-unroot-your-htc-evo-4g/
You can also try this
http://www.goodandevo.net/2011/03/how-to-unroot-your-htc-evo-4g.html
Click to expand...
Click to collapse
yes, they are basically the same method I used in my OP from xda forums.
On to captain_throwbacks second ruu.
Just to make sure, this all isn't in vain, and make you all hate me, after applying one of these successfully, my recovery should go back to factory and no longer be clockwork, right? or wrong, because I'm starting to think I am. But won't taking your device in for service with clockwork be a dead giveaway that it was rooted.
I think I'm just going to go get a new phone for a $100 deductible at this point. and replace the screen my self on my old one and keep it as a backup/test device. Thanks for all the help, but I am surrendering :-D hopefully I can reroot this thing again with unrevoked, since my hboot is still .97 and fix the screen my self.

It generally doesn't matter if its rooted. I've never unrooted since launch day. And I've had 3 screen replacements, 3 speaker rwolacements , a bezel replaced, and camera lens cover replaced (last time, I dropped it off with ICS), about to go get my 4th screen (just cracked it again lol).
Sorry for your experience/frustration.
sent from AOKP heaven

well last stupid question i promise, since i still have clockwork isntalled, i can just restore my CM7 backup, but how do i get s-off back, re unrevoked it i assume?

If your'e worried about the warranty thing, just flash a stock rooted rom, or use a phone repair service. i see three or four repair places on craigslist (granted, that you live in a large city).

yeah no worries. Got it back to S-OFF, and CM7 back on it, just going to fix the screen my self, ordered one for $15.
thread can be locked, deleted, or what ever.

Seriously. Dude, isn't there a sprint store near you?. Just take it in. Put a stockish rom on it if you're that worried about it. They should replace it for free.
sent from AOKP heaven

[Q] Stuck in a loop please help

Incrediblec XD ship S-On
Hboot-0.92.0000
microp-0417
touch panel-atmelc03_16ac
Radio-2.15.10.07.07
Jul 23 2010, 18:06:51
Hello, first thank you for an amazing and current forum, I'd been researching my issue for a while, but most things are dated around 2010. I've experience rooting and ROMing a Droid X with multiple ROMS, but I use the original Incredible as my main phone because I still love it. Well, I originally rooted my Inc with Unrevoked3 I believe. I left the ROM as stock up until a couple months ago when I put CM7.2.0 on it.
About a week ago, the phone would always have working mobile data. Yet, if I received or tried to make a call, I couldn't and then I would lose texting ability. Then, a couple days ago, I was using the Inc for wifi tethering when suddenly it went into an Incredible bootloop. I tried booting to the cyanogen recovery, but it will quickly loop out of it as well.
I went to pvillecomp.com/ and downloaded all the stock Inc software. I individually renamed files to PB31IMG.zip and tried to have HBoot pick up on them. Hboot will see the files, but then do nothing. Except, the originally ROM will get checked and come back and say that the current version is older and can't be flashed.
I've always tried the RUU software for hboot and the original ROM. I either get a usb error or a low battery error even if the battery is charged. Granted, I'm trying the RUU from the phone's bootloader screen.
Does anyone have some support they could throw this way? I use my phone for internet and everything. Thank you all.
-Nevin

BUMP*
Has anyone any ideas? I've since ordered a replacement phone, but would really like a workaround in case something would happen again or even to fix the old one. Thanx all.
-Nevin

NevinInc said:
BUMP*
Has anyone any ideas? I've since ordered a replacement phone, but would really like a workaround in case something would happen again or even to fix the old one. Thanx all.
-Nevin
Click to expand...
Click to collapse
did you flash any radios? Flashing radios always ends up bad.

NevinInc said:
BUMP*
Has anyone any ideas? I've since ordered a replacement phone, but would really like a workaround in case something would happen again or even to fix the old one. Thanx all.
-Nevin
Click to expand...
Click to collapse
S-off, flash TWRP (because CWM sucks) and flash a new rom. This should fix everything. Flashing a radio DOES not screw everything unless you do not know what to flash, in that case you should not be flashing radios.

I'm looking into the TWRP stuff right now since I've only experience with CWM. My only concern is that I still have S-on. How can I get S-off on my phone when I've only access to the bootloader? Sorry if this is a bit off a noob post, I've simply not the experience with the incredible to know. Thank you so much.
-Nevin
123421342 said:
S-off, flash TWRP (because CWM sucks) and flash a new rom. This should fix everything. Flashing a radio DOES not screw everything unless you do not know what to flash, in that case you should not be flashing radios.
Click to expand...
Click to collapse

Btw, no I didn't flash the radio. That was the only thing I didn't attempt to flash. Yet, when attempting to flash anything else, nothing worked. Still wondering about getting S-off before using TWRP, but hopeful to still get it working. Thank you again.
NevinInc said:
I'm looking into the TWRP stuff right now since I've only experience with CWM. My only concern is that I still have S-on. How can I get S-off on my phone when I've only access to the bootloader? Sorry if this is a bit off a noob post, I've simply not the experience with the incredible to know. Thank you so much.
-Nevin
Click to expand...
Click to collapse

BUMP/UPDATE:
Yes, I'm still at it trying to get my Dinc out of it's bootloop and up/running. It's difficult at this point to say what all I've tried. At one point I wanted to use htcdev.com to ensure the bootloader was unlocked/etc. I've had much trouble trying to get fastboot to work correctly on my pc. I've seem to get stuck on "waiting for device" which appears to be a driver error.
I gave up on that and started focusing on the RUU process. I've tried to install the entire Gingerbread 605.3 file. I fixed the error usb 170 by updated or changing htc sync software. Now I'm left with error 140 bootloader error.
I've also updated hboot using the ruu process for version 605.2. This worked on my pc and got me partially excited. Now my hboot shows up as "Locked" now at the top. I also downloaded a different Stock.img file. Hboot detected this and begun the install process. Everything came up as complete and upon reboot went right back into the white screen/incredible bootloop.
So since posting before I've updated htc sync on my pc and have officially relocked my bootloader. I don't mind RUU'ing things to stock, but now gotta get past the Error 140. Any ideas?

So I'm not sure how many are looking at this or have had ideas, but I was able to use htcdev to unlock the bootloader.
Before unlocking the bootloader I was able to RUU to image .15. After this is when I unlocked the booloader. The RUU said it was complete, but I still only bootloop on the incredible white screen. Now, some of the pb31img.zip files I've come across don't even try to install. This includes signed and unsigned .15 img files. Currently these are the new settings to the phone:
Bootloader: unlocked, s-on
hboot 1.07.0000
radio - 2.15.10.12.20
Image version: 4.08.605.15
The last option I can think of is to try using fastboot, but won't that essentially do the same thing? If you think fastboot is the way to go, can u link me or give me some basics on using it. Obviously I used it for unlocking the bootloader so it can't be that complicated.
Are there any other ideas or should I give up on my Dinc? Looking forward to hear what you think. Thanx.
-Nevin

somebody recommended you install TWRP and install a stable Jellybean ROM. Did you try that?