{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDANDROID 2.2.2 AOSP
Welcome to the official XDANDROID AOSP thread which is dedicated to getting Android running on our beloved HTC devices.
Phhusson: has dedicated most of his time helping users and updating kernel to run Eclair and his work for other msm7k devices. However phhusson is not alone as there are also other members working on this. You can find some of them on http://www.htc-linux.org. I've listed some of the developers i know of that currently are working on and they deserve credits and thanks. We also have to note that before this work done there was quite a substantial number of people starting working on linux for our devices. Without them we may not be where we are today. So respect and credits to everyone involved in working on linux kernel for msm devices.
I am not responsible for any damages or problems your device encounters. The build is relatively safe and shouldn't cause any problems.
xda-developers signatures
For everyone posting on this thread about problems and issues, I urge you to please specify you're device or more conveniently update you're signature in control panel so it always has the details at the bottom of your posts.
FAQ
This has lots of Q&A and is recommended to go through before posting bugs and problems.
Please read post 1-4 as they have relevant information and is frequently updated.
XDANDROID project wiki huge thanks to sd73ta for hosting
Android questions and general FAQ
Overclocking Android on MSM7K
MSM7K Android OverClock
XDANDROID boot-Animation | Wallpaper contest
XDANDROID wallpaper | boot animation contest
Videos for XDANDROID
TheDeadCPU: setting up XDANDROID tutorial
TheDeadCPU: setting up XDANDROID tutorial v2NEW
XDANDROID initial-bootup
XDANDROID booting on HD2
Pocketnow Rhodium 2.1 video
Thanks to
phhusson, zenulator, Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, bzo, captainoord, glemsom, balsat, viruscrazy and anyone else who contribued or who i forgot
Thanks ben_duder for the awesome sig
Donations:
Please consider a donation to the XDANDROID project. We work on this on our spare time, sometimes even not on our spare times and every little bit gives us more inspiration and motivation to continue providing you our friends awww* great builds and support
Thanks to from me and phhusson:
R^7Z | auss81 | Sergej Philipp | Malte Lewan | suksanto | Tyler Brixey | axelo | ElbertF
w3bm4st3r | Kenny Maples | Daniel Krebs | Dan Colardeau | Ghostdogg | Gregory Thomas
Vincent Paoli | nim_ayyan | mindfrost82 | Olivier van der Kruijf | Robert Russell
Kamil Kowalski | Tobias Kästle | Scrog | Mehdi Bouzakri | Jay Onisch | Daren Scroggie
Robert Batty | James Frank | Matthias Helfmann | colo-natas
dcb.insomniacsoft.com | Alexis Perez | Ann Marie Steichmann | Cristian Pereyra
Adam Williamson | Benedikt Wieloch | Brad Stage | Paolo Vernazza | CDK Hosting
Haicheng Wang | Jonas Lejeune | Haicheng Wang | Jonas Lejeune
Adrian Kajda | Wilson Seto | Pedro Aragao | babijoee (yup, myself XD)
Spread the word about xdandroid, please feel free to use this sig created by ben_duder
Working:
Alpha
WiFi - "loads" but can't scan for networks
Bluetooth - interface hangs in configuration (need to fix init.rc)
Power management - Something wakes the phone up immediately, have to look into it
SD Card - I have to find a working config for Android to recognize this
bzo: anything to do with GPS will cause a crash
Accelerometer works
Keyboard works
Some G-Apps work
Brightness control works
Scepterr: net location works, NetworkLocation.apk needs to be signed with platform-key
Adding linpack and Quadrant benchmark programs for testing ( only built in for now. will be removed in future and more stable packs )
Sound works in apps
3D works
So far no boot loop
So far wifi scans now and is trying to get ip-address. Now looking into DCHP
Speakerphone works
Headset works
Beta.v1
1.7.10
JIT enabled
SDcard fixed
adding charmonix ledeffects
removing launcher2
adding launcherpro as default launcher
Added lugiber boot-animation
removing some unnecessary apps. will update to let you know what i remove.
removed setupwizard / default provision
Sound is now working ( stinebd )
Updated apns.xml
GRPS connections should be more stable now.
Removed default music app and replace with cacheinjection Music Mod 1.7.5.1
Added Flash10.1 - not working.
Adding OIfilemanager
XDA-application
Beta.v2
JIT now enabled by default
Wifi working with latest rootfs
Youtube vids work on low quality.
SD card fixed
Sound ringtones and notifications issue should be fixed
Updated apns.xml from thread
Removed default music app and replace with cacheinjection Music Mod 1.7.5.2
RC1 released.
RC2.25.7.10
Dialer slide to answer re-added.
Adding chrometophone
Updated Launcherpro, xda, OIfilemanager.
Word prediction/dictionary cherrypicked from cyanogen git
19.8.10
Nothing major just some
General tweaking
Bug fixes
Removed most apps that caused instability.
FINAL 17.09.10
FRX01 by stinebd
Added full language pack
Added Chinese and Japanese IMEs
Boot animation speedup (ro.opengles.version=1 sync from upstream)
GApps package update (thanks to CyanogenMod)
Replace Gallery3D with Gallery, for stability improvement
Several changes to enable userland Camera support (from bzo, still needs kernel support)
Userland built-in WiFi tethering support for Rhodium (rootfs changes and testing needed)
Signed XDAndroid release packages
Updated startup configs
Using andboot as default root directory
Startup & conf update 30.9.10
Fix raph800 typo.
25.10.10
The following bugs were fixed:
Talk.apk missing
Buttons cut off in the open call menu.
OpenWnn IME selected by default
Google Apps updated to 20101020.1
Transitioned to hdpi graphics and fonts
Ambient light sensor and hardware auto brightness for RAPH and RHOD (WisTilt2)
Debug output for battery service emergency shutdowns (by request of camro)
Data roaming off by default (can be dangerous for international users) (emwe)
armv6j instruction support from cyanogenmod
FRX03 20.11.10
Disable slow background blurring for some dialogs (thanks emwe)
Internal improvements to auto-backlight implementation (emwe)
Disable JIT by default for various stability improvements
Updated gapps package (20101114)
Bugs fixed:
19 - Boot loop on first boot (fresh data.img)
36 - Repeated Volume button press crashes the system
Possibly 12 - Terminal emulator special keys/digits do not respond
FRX04 24.01.11
Improved 3D performance, with fixes for WVGA devices [acl] – IMPORTANT: this requires the accompanying rootfs release from 21 Jan.
Synced all minor upstream changes from AOSP
FRX05 3.03.11
Camera support – both photo and video capture (without sound currently) are working. This depends on kernel support, so only Rhodium and Topaz are supported currently. Huge thanks to Jerome Bruneaux (viruscrazy on XDA) for basically doing all the work.
Switch build variants from engineering to user-debug for slight speedup.
FRX06 31.03.11
Switched to touch-friendly dialer, along with the VGA layout improvements as seen in Gingerbread
Added HSPA icon (for GSM models)
NEW* XDAndroid Gingerbread build added to thread.
Check third post for links
Further tuned keyboard sizing to be useful on VGA (also made the key labels bigger)
World-phone settings support (very important for future RIL enhancements especially on CDMA)
Enabled HSPA icon (someone on GSM please let me know if it actually works)
Not Working
Sound Recording during video recording
Removed
Added but not yet released
Terms and conditions
Enjoy and remember to post some feedback.
Downloads
Bundles
22.11.10 | 2.2.1 builds
Arrrghhh has built a up-to-date package for people who dont want to download everything. Grab it here: Arrrghhh 2.2.1 update package
Note: You'll need a new data.img as this package is signed. Otherwise you'll get a bootloop
Also you'll need to select English IME if you want to type in english.
System
31.03.11
XDAndroid FRX06 system update NEW
31.03.11
XDAndroid Gingerbread system update NEW
OTA update
24.01.11
No OTA update for FRX05
The recommended method is the OTA update.zip. However, for users who don't have a completely original FRX02 to upgrade from, the system.ext2 file will be necessary.
OTA Update procedure (ONLY for users with the original, unmodified signed FRX02 system image)
Download update-FRX03.zip to SD card in the same directory as startup.txt and haret, etc
Rename update-FRX03.zip to update.zip
Boot haret, watch the updater go
After updater finishes, it may either reboot or "freeze" (reboot not implemented on device), reboot manually if it freezes
Boot haret again, and the new system will start up
Old builds can be located here
htcandroid.xland.cz
4shared.com
Here is a repositories for older releases of XDANDROID and Android1.6 donut files
[/INDENT]
Startup & Conf Updates
30.9.10
http://htcandroid.xland.cz/configs.zip
StartupUtility
http://sites.google.com/site/androidport/startup-utility
zImage Autobuild: ( glemsom / balsat )
glemsomAutobuilds
balsatAutobuilds
zImage are updated quite often but just because its updated, it doesn't necessarily mean it will work 100%. If a new zImage breaks and doesn't boot; load a previous working zImage. thanks
Rootfs Autobuild ( Stinebd )
RootfsAutobuilds
Get the latest rootfs here from the rootfs build service provided Stinebd for XDANDROID
Initramfs Autobuilds ( Stinebd )
InitramfsAutobuilds
Get the latest Initramfs here from the Initramfs build service provided Stinebd for XDANDROID
Others
WinMO/Android dual-boot
Yozgatg dual-boot
Yozgatg has released his dual boot WinMo / Android program for everyone to enjoy
LiteWM ROM to autoboot linux
LightNHB boot
MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works It has a boot option so just wait until you see Booting countdown and touch the screen.
Reboot, Shutdown, USB mass Storage and Continue Booting Android
CAB-Install for XDANDROID
Eclair 2.1 cab-install
Froyo 2.2 CAB install
TheBrilliantMistake has made a convenient program for people out there having installation problems with XDANDROID.
Have a look and see if you like it. If this proves successful we may roll out the updates like this in the future.
Chamonix ledEffects
LedEffects
LedEffects controls how your device reacts to calls, messages, charging and other phone status'
XDANDROID wifi-tether by stinebd
XDANDROID-wifi-tether
All the required dependencies and modules should now be built into the system/rootfs and so the standalone application should be good to go. Note this will be added into next build.
Advanced Users
How to mount system.ext2 to make changes
Make sure you are running a linux distro
Make a temp folder for mounting. eg: mkdir tempfolder
sudo mount -o loop system.ext2 tempfolder
Make your changes using nautilus. Google how to use it.
sudo umount tempfolder
Load XDANDROID within a custom named folder
Set Android directory: "rel_path=XXXXXXXX"
Set directory to where you are storing your installation
Eg: Put all files into folder named xdandroid
so cmd will be rel_path=xdandroid
Use this if you want to keep you SDcard more organised.
Waiting for SDCard error
For people who have problems with sdcard message, add this to your startup
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
Turning on led flash
echo 1 > /sys/class/htc_hw/flash
Diamond Storage Issues (Storage Card Unmounted)
To fix this issue
simply download the HP Format Tool | Mirror
Install the tool
Start Diamond in WinMo. Connect to computer via usb (Usb Drive). Make sure it is connected. Back up all contents of your internal storage.
Run the tool
Select your internal storage.
Format FAT32 (Full format).
Restore items on your internal storage.
Load Android
Android should no longer give you a message saying the SDcard is unmounted. This also fixes no media being found when loading android. thanks hamagc for writing up this guideadb and usb debugging
To ensure that you are able to use adb and usb debugging you will need to plug in your usb cable to your computer and in winmo select activesync. Now launch haret and once Android is loaded you'll see a notification that will notify you have usb-debugging control and able to use adb.Guide
Place everything into the root of your sd card for Raphael and Everything in your internal memory for Diamond. Remember to copy the correct startup from the startup config folder.
It should look like this
--root--
\AndroidApps
\conf
\media
-haret.exe
-initrd.gz
-rootfs.img
-system.ext | system.sqsh
-zImage
-modulesXXXXXXXXXXX
-startup.txtStartup|default configs options
Overclocking
acpuclock.oc_freq_khz=XXXXXX ( i personally use 600000-640000 )
but it very unstable if you try to get higher than 650000-700000
Physical Keyboard layout
physkeyboard=fuze
physkeyboard=raph
physkeyboard=nordic_raph
physkeyboard=tilt2
physkeyboard=rhod210
physkeyboard=rhod100_de
physkeyboard=rhod100_fr
physkeyboard=rhod100_it
physkeyboard=rhod100_uk
physkeyboard=rhod100_nordic
physkeyboard=rhod400
physkeyboard=rhod500
physkeyboard=swiss_raph
physkeyboard=german_raph
Button wake up
board-htcraphael-navi.wake=X
0 = screen only wakes on power button
1 = wakes on any keypress
Onscreen terminal keyboard
msmvkeyb_toggle= (on/off)
on = displays terminal onscreen keyboard
off = hide terminal onscreen keyboard
Headset
snd.force_headset=X
1=USB headset
2=3.5mm headset
Incall volume adjust
htc_hw.call_vol=X
0-5
0: being lowest and 5: being loudest
Enable/Disable handsfree
htc_hw.handsfree=X
1=Enable
0=Disable
Recommended best loud and clear voice values are said to be 5/1
htc_hw.call_vol=5
htc_hw.handsfree=1
Disable low battery Warning
htc_battery_smem.fake=1 (option: 0=off / 1=on) -> will fake the system to think, that USB-CHarger is always connected
htc_battery_smem.vol_min=0 (0-100 -integer value) -> if battery volume is lower as this value, then it set it to vol_min, so it can be handled, that system goes never below this value and so never auto shutdown, could be helpfull, if you want, that the system never reboot from itself
htc_battery_smem.debug=0 (0 | 1 | 2 | 4 - bit-wise) (option: 0=off / 1=battery info | 2=batt cable info | 4=debug info(like statistics all10sec) -> so if you want to log ALL you must add the bits -> like 7
Disable/Enable HW3d
hw3d.force=X
0=off
1=on
LCD density / resolution
lcd.density=XXX
210 = 640x480 VGA devices
240 = 800x480 WVGA devicesLoad Haret
Load haret by going into FileExplorer and navigate to where haret is and load it.Navigation
Note: This is a dummy screen i took from google images Its not actually looking like this
1. Power Button
Press: Go home screen
Hold: Switch between Application
2. VolUP
Press: Increase ringtone, media and incall volume
3. VolDown
Press: Decrease ringtone, media and incall volume. Can also set vibrate and Silent.
4. Home Button
Press: Open up setting
5. Call Button
Press: Open recent call
Hold: Launch Voice dialer
6. Back Button
Press: Goes back one previous screen
7. Call end Button
press: Turn off display or end phone call
Hold: Set audio on or off, Airplane mode or turn off device
8. Center Button
Press: Accept or select. Also used as scrolling, zoom in or out.
9. Android Menu tab
Pull up or down to open / close Program tab
10. Notification tab
Pull up or down to open / close notification tab
11. USB
Plug in USB for adb, USB debugging, charging
Useful links
XDANDROID Facebook fan page
Stinebd blog
BugFeatures and Request
Phhussons git repo
Phhusson wiki
ohhhhhhh!!!!
Sent from my AOSP on XDANDROID MSM using Tapatalk
I hope that we can get it fully functional in order to finally get rid of WinMo.
Thanx for all hard work again, devs!
7th! woooooopieeee! hehehe. Throw me something. i'll do extensive, massive, thorough testing on the phone. diam100 here
I am pumped for this. My main things will be for the wifi hotspot and with the JIT.
byrnsey88 said:
I am pumped for this. My main things will be for the wifi hotspot and with the JIT.
Click to expand...
Click to collapse
just checked for that and its not avaliable... i dont think its an open-source feature. However there is USB tethering which is almost as good
Download link when available ? At this time 2.1 21.06 build is the best for me ;D
Phenom1337 said:
Download link when available ? At this time 2.1 21.06 build is the best for me ;D
Click to expand...
Click to collapse
hmmm i'll try to upload something within 1-2 hours. i'm still modifying and testing it out.
I'll try to give out something decent enough so people are able to test it immediately without needing to install apps
I'm available for testing
froyo is coming!
Yeaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaah! I love frozen yogurt!
babijoee you are the best
the release may be delayed as i want to get working wifi.
Please stay tuned
wow. haven't been so excited like this ever. he he he. hows the battery going babijoee? is it like the eclair?
thanks
vitusdoom said:
wow. haven't been so excited like this ever. he he he. hows the battery going babijoee? is it like the eclair?
thanks
Click to expand...
Click to collapse
According to google JIT should save battery life, so you may or may not see any difference. I haven't tested it long enough and the kernel is still the same so it shouldn't be any drastically better
oh ok. Thanks for that info. I'll still mark it on the list of stuff to test then. looking forward to your upload.
In the new Rootfs there is support for wi-fi scanning in froyo!
HELICOPTER88 said:
In the new Rootfs there is support for wi-fi scanning in froyo!
Click to expand...
Click to collapse
glad to hear
Related
android by polyrhythmic:
Eclair 2.1 for Kaiser/Vogue/Polaris -- polymod 2.1 gamma [Based on OpenEclair 1.2.2 (XDA thread)]
Now available in TWO shades:
Light
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and Dark
BOTH themes have updated Desire settings icons and QVGA dialer:
ctso said:
OpenEclair is a community ROM based on the AOSP 2.1 source code (with lots of Cyanogen mixed in).
The goal of OpenEclair is to bring to the community a fast and stable Eclair 2.1 ROM, with contributions from numerous ROM developers.
Click to expand...
Click to collapse
A few things to look forward to in this build:
OpenGL Hardware Acceleration! (thanks again to the amazing dzo!)
Much improved battery life
Working autocomplete (for Spanish and English) touch keyboard
Working Google Voice and Maps 4.0 with Full Nav (or int'l Maps 4.0 with Nav)
GPS with AGPS (Network "Cell-Tower" Location reported buggy for some users)
5 home screens and Full QVGA Compatibility
Stability. The OpenEclair base is the most stable yet
New install system (which means easier upgrading and multiple themes in the future!)
Thanks to all devs who have made this possible! zenulator, dzo, vilord, srwalter, mssmison, manup456, enatefox, jnadke, wesgarner, ctso, zapote21, bcrook, JAguirre1231 to name a few
I'd also like to thank Android Framework Engineer Dianne Hackborn , the many reponses to devs' questions she has left all over the net have taught me tons about Android.
A huge THANKS to those who have already donated!!!
Pandemic187, manu33xtro, kevinddavis, Robert H., Chui M., Dermot M., Jake Y., S Suresh K., Michael W., Rafael R., Edward C., Steven H., Stephen P., Dirk L., Adam P., Mile V., Leann M., Dave W., anonymous, Steve R., Avi R., Sebastian C., crymzyn, aikeru, Fiddelm3742, Steven T., Morten M., kendav911, James B., Peter V., and Stefan P.
Also much gratitude to ponack for providing free hosting!
UPDATE 10 Feb 2010:
polymod 2.1a released!
Based on OpenEclair 2.1, this should be the most stable base going forward.
Install process changed.
UPDATE 11 Feb 2010:
polymod 2.1 alpha 2 package with working OpenGL now released!!!
UPDATE 12 Feb 2010:
polymod 2.1 alpha 3 package with working init and compache now released! Major speed improvements!!
2.1a3 changelog:
Some improvements from OpenEclair 1.1.5 added
Fixed init scripts
No more hot wifi! Better wifi power settings!
Fixed missing hw3d driver (sorry y'all!)
Compcache added (ram swap only, no backing or disk swap, at least for now)
Custom userinit.conf supported for power users (just copy /system/etc/userinit.conf to andboot folder on your sdcard and tweak to your liking)
Additional polymod alpha 3 Release Notes
UPDATE 15 Feb 2010:
polymod 2.1 alpha 4 now released! Much easier install process for NAND/ext2/fat32 install. More bugfixes.
2.1a4 changelog
no more switching default.txt/kernel! Installer and 3d now both in one kernel.
NAND now supported too!
Installer will prompt you! Press and hold d-pad center to launch installer.
Improved tiwlan.ini settings
Facebook full sync working
AndroidApps app install now working
/andboot/userinit.d folder now supported for multiple init scripts
app structure changed for NAND-compatibility
Run less services - Corporate Calendar (MotoCal) & bluetooth now uninstallable
Also, custom splash screen for Kaiser! (I don't have the files to build this for Vogue or Polaris)
[ Download Here ]
UPDATE 19 Feb 2010:
Displayfix update released
UPDATE 20 Feb 2010:
There have been some minor kernel updates. Please get the latest .nbh from KaiserEclair folder or kernel zImage-Eclair from http://sourceforge.net/projects/androidhtc/files/.
UPDATE 23 Feb 2010:
polymod 2.1 beta now released!
2.1b changelog
All possible apps png-optimized for less memory use and speed
Compcache settings optimized for faster app loading and switching
Phone app (and others) reprioritized to improve responsiveness
Java (JBed) fully working! (Tested with the latest Opera Mini 4.2)
Apps separated for NAND-compatibility and uninstallability
Smooth Animation and working 3D
Media folder includes a couple Drum n' Bass ringtones and original Sonic the Hedgehog notification sounds
Other minor updates/bugfixes
New sourceforge kernel has vastly-improved installer (credit goes to dzo, vilord, mssmison, and more)
UPDATE 4 Mar 2010:
polymod 2.1 gamma now released! This is a major update!
THIS IS A FULL-WIPE BUILD. SYSTEM and DATA MUST BE WIPED FOR INSTALLATION.
2.1g changelog
Upgraded base to OpenEclair 1.2.2 -- faster apps, less bugs
Better memory management -- compcache & swap turned off by default
More apps are uninstallable
Regular Maps is included (but is uninstallable)
Updated Facebook app (uninstallable)
GPS is more stable; GPSTest is working and included (and uninstallable)
Dialer customized and recompiled from source for QVGA
Phone & incoming calls are more responsive
Colored Settings icons from the Desire
Lockscreen: No more menu-to-unlock, slide to unlock only
Light theme includes 'Bounce' animations
Dark theme available, more themed than before, includes custom "Super D" animations
Many Live Wallpapers are working, including Grass, Bezier, Bobs, Polar Clock
CLI Editor nano now included (use OK button for CTRL, Fn + Left Softkey for pipe)
Miscellaneous bugfixes
UPDATE 15 Mar 2010:
polymod 2.1 g BT Update now released + .NBHs for Polaris!!
BT Audio routing and PAN Networking does not work properly yet on Eclair! You can pair with devices, and send files, but if you attempt to make a call with BT audio, you'll probably end up with no sound and will have to reboot to fix it. However, we will likely fix that soon, and you'll only have to update your kernel.
You can again thank dzo (Donation Link) for coding the fix, and also thank fellow xda member Mr. PaveL for tirelessly building and testing .NBHs with me while dzo updated.
The only other noticeable updates this kernel provides is soft-reset support for Kaiser and working speakerphone -- so if you don't need these features and polymod is already working well for you, there is no need to update!
Grab the polymod_2.1g-BT_Update.zip and the zImage or .NBH for your Kaiser or Polaris from the polymod @ ponack repository. Place androidupdate.tar from the zip in your /andboot/ folder, replace your zImage or flash your .NBH, and use the installer to update the system.
UPDATE 18 Mar 2010:
polymod 2.1 g WiFi Power Level Updates released!
Head over to http://ponack.net/poly/WiFi , and get .zips for Low, Medium, High, and Over 9000 WiFi Power Levels. Each .zip contains an androidupdate.tar, place it in your andboot folder and use the installer to update!
UPDATE 19 Mar 2010:
Latest .NBHs and Kernel for Kaiser & Polaris posted to http://ponack.net/poly/BT_Update/ , thanks again to Mr PaveL for building them.
If you're using HaRET, the same zImage now works for Donut AND Eclair. For Eclair you will need to add hw3d.version=1 to the command line in your default.txt . If the previous BT zImage wasn't working for you, this one should. (New Vogue .nbh and the same kernel can be found @ dzo's site.)
UPDATE 23 Mar 2010:
Full Market update released!
Use the installer to apply the update, and then 'fix permissions'.
http://ponack.net/poly/2.1g/polymod_2.1g-Full_Market_Update.zip
SD install:
Download the latest basefiles (haretinstall.zip) from SourceForge
Make sure to use the correct default.txt for your device. The default.txt must also point to zimage-eclair instead of zimage.
If you want to partition, you will need your partitions to be:
1: FAT32 (at least 512MB, to be safe) / 2: EXT2 (256MB) / 3: ext2 (256MB)
Warning: Partitioning your SD card successfully can be difficult, I recommend using Linux.
NAND install:
This is an beta build! I am not responsible if you brick your phone or a tornado lands in your yard due to flashing to NAND!
How to flash a ROM for Kaiser
Download the latest .nbh from SourceForge -- Make sure to use the kaisereclair / polariseclair / vogueeclair variant
The polymod package:
[ DOWNLOAD Eclair polymod 2.1g Light-Themed for SD install or NAND ]
[ DOWNLOAD Eclair polymod 2.1g Dark-Themed for SD install or NAND ]
[ DOWNLOAD OptionalApps.zip ]
[ Link to the background wallpaper ]
Installation Instructions:
Place the androidinstall.tgz from polymod_2.1g.zip in your /andboot folder on your SDcard. Hold dpad-center when prompted during boot to install.
Let the system boot, and don't do anything but go through the setup wizard pressing skip. Don't sync accounts, or setup data, or set your wallpaper. After skipping through the setup wizard, wait at least 5 minutes, then turn off the device.
Now power-on your device (this is a good time to backup, just in case) and after boot you can start setting up your accounts like normal.
If you do ANYTHING more on the first boot, your data may get corrupted and you may get FC's. I don't know why that problem happens, but I know if you use the above instructions you will end up with a very stable and fast Eclair build.
Need better instructions? Try reading j101399j's awesome polymod Eclair install guide with images!
Questions? Don't forget to use the search!! Your question has probably been asked and answered before. Also, here's an Android on Kaiser FAQ
Please use this build with the latest radio, for Kaiser that is 1.71.09.01. Old radios are not supported.
What works:
Normal Sleep/Suspend (not hacked!)
Calls/Txt
3G Data/MMS
Wifi
Full GPS with AGPS
Network (Cell-Tower-based) Location (buggy)
Hardware OpenGLES
Google Apps
Google Sync
Exchange Calendar
Facebook
YouTube
Apps included in this build:
Live Wallpapers: Grass, Beziers, Bobs, Polar Clock, Visualizations
Astro File Manager [Free]
Taskiller Free 1.8.1 (no ads + CUSTOM THEMED TASKBAR WIDGET) [Free]
Facebook (full sync working)
Myspace
Car Home
Desk Clock [new!]
YouTube
Powerbar Widget
Genie Widget (a.k.a News and Weather app)
Nav Launcher [Free]
Tetherbot [Free]
GPS Test [Free]
extra terminal tools in bin/xbin: rwsystem, rosystem, nano & more
Optional Apps (in zipfile):
Maps (US and Int'l Nav)
HTC_IME (for 320x480 white soft-keyboard)
PinyinIME (Chinese soft-keyboard with auto-complete)
HTC Notes (nice, but always runs in background)
Amazon mp3
ConnectBot (latest from Google Code repo)
Jbed (for Java apps)
Frozen Bubble
Jewels
Solitare
Gestures Builder
Not working:
Bluetooth
Camera
Voice Dial/Search/Keyboard
Speakerphone
YouTube HQ
'Reboot'
TODO:
Create full /andboot/ packages for n00bs
Create androidupdate.tgz for different WiFi power levels
Create androidupdate.tgz to switch animations
Test light-to-dark and dark-to-light
The 'Cell-Tower' Location bug has been found (fix in progress)
Full-Build PNG-Optimization (in progress)
Clean up the in-call dialer buttons
Improve the music app for QVGA
Make menu-to-unlock a Spare Parts option (fix in progress)
Camera, Bluetooth, Audio-In, Video Playback (fixes being worked on, volunteers always appreciated)
Add Kaiser vendor to OE github
Rebuild themed .apks from source
Skin information & credits:
* Light Tray Launcher from gChrome by Moonspoon (link)
* Dark Tray Launcher from Gloss by Moonspoon
* Dark Theme Colored Notification Icons from Zapote21's Zapmix 0.95
* Black Notification Bar and Notification Tray Handle from OpenEclair MetaMorph put together by JAguirre1231 (link)
* custom wallpaper, robot from (link)
* custom dark-themed taskiller bar
something wrong with the rootfs file, cannot download, can you upload to another mirror server?
Thanks! Downloading and will try it later.
idinaxui said:
something wrong with the rootfs file, cannot download, can you upload to another mirror server?
Click to expand...
Click to collapse
mirror added
Does it work if one has PIN set up on his SIM card? I know 1.5/1.6 didn't. I would check it myself, but I don't have PIN and I heard that once set one can't undo it on my SIM card...
polyrhythmic, because of you, we can test this new build. We value your contribution and we are not left out.
Wow!! Thank you! I'll have to try this out! I'm pretty newb when it comes to HaRET
Here guys, i modified the rootfs from polyrthmic to work with msmissions and vilords eclair hero.
Uploaded second version with init.eclairhero.rc as init.eclairhero.kaiser.rc
Changelog from Polyrythmics one:
-copy init.eclair.kaiser.rc to init.eclairhero.kaiser.rc
-works with http://forum.xda-developers.com/showthread.php?t=599907
http://rapidshare.com/files/320878683/rootfs-eclair-andeclairhero-kaiser.img
I installed this version and:
- it works slow - first version for kaiser so I understand it
- BT and WiFi not work
- GPS - I didn't check
- something strange with battery - when charging it shows i.e. 73% and battery widet shows 77% but this is probably not Your fault ;-)
It seems to be a full night. and it seems that we still have devs on our Kaiser phones. God bless you all. Now I test Zen's build, and after that, thanks to JeckyllHavok, msmissions and vilord's build.
No idea how to get this to work, not had trouble before with Ion donut.
How is it meant to look on the SD card?
CONF
MEDIA
default.txt
haret.exe
initrd.gz
rootfs.img
zImage
system.sqsh
is how mine looks, is this right?
Updated my rootfs. See my post above now works ith eclairhero
JeckyllHavok said:
Here guys, i modified the rootfs from polyrthmic to work with msmissions and vilords eclair hero.
Uploaded second version with init.eclairhero.rc as init.eclairhero.kaiser.rc
Changelog from Polyrythmics one:
-copy init.eclair.kaiser.rc to init.eclairhero.kaiser.rc
-works with http://forum.xda-developers.com/showthread.php?t=599907
http://rapidshare.com/files/320878683/rootfs-eclair-andeclairhero-kaiser.img
Click to expand...
Click to collapse
Looks like you and I are working toward the same end Come and join me, let's keep the Eclair Hero discussion in the Kaiser Eclair Hero thread
paulharrison123 said:
No idea how to get this to work, not had trouble before with Ion donut.
How is it meant to look on the SD card?
CONF
MEDIA
default.txt
haret.exe
initrd.gz
rootfs.img
zImage
system.sqsh
is how mine looks, is this right?
Click to expand...
Click to collapse
That is how it used to be done. Now we make an /android/ folder in the root of your SD card, and put all the files in /android/. conf and media should be lowercase, because case matters in Linux.
So, it should look like:
Code:
/android
/conf
eclair.user.conf
hero.user.conf
...
/media
default.txt (or startup.txt)
haret.exe
initrd.gz
rootfs.img
zImage
system.sqsh
Many thanks, managed to get it working with the old style which was odd, however no wifi means i cant use this
same here, unable to start wi-fi. it does not create de calibration file on the sd card.
is fast, like donut.
how to clear data partition?
czarnas said:
how to clear data partition?
Click to expand...
Click to collapse
During boot, when it says Press VolDn, press VolDn (left softkey). Then follow the instructions on-screen.
I'll see what I can do about the WiFi, 3G data works great for me so far.
polyrhythmic - would be great if you fix this.
polyrhythmic said:
During boot, when it says Press VolDn, press VolDn (left softkey). Then follow the instructions on-screen.
I'll see what I can do about the WiFi, 3G data works great for me so far.
Click to expand...
Click to collapse
I would love to help with Wi-Fi but I can't find a terminal app on the phone. Am I just missing it. Please let me know. Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CLICK HERE FOR THE XDANDROID 2.2 PROJECT
XDANDROID 2.1 AOSP
Welcome to the official XDANDROID thread which is dedicated to getting Android running on our beloved HTC devices.
So far devices supported are raphael|fuze|diamond|blackstone|topaz|rhodium
Over at the vogue forums, Zenulator has just released an updated version for Android. Codename Eclair, it brings Android to 2.0.1
Since then it has been bumped up and based upon Manup456 port. Many thanks
Stinebd has recently built an 2.1 AOSP build from source for those who want to use a clean 2.1 build. The current builds are based on the AOSP and we are waiting for 2.2 source
Phhusson: has dedicated most of his time helping users and updating kernel to run Eclair and his work for other msm7k devices. However phhusson is not alone as there are also other members working on this. You can find some of them on http://www.htc-linux.org. I've listed some of the developers i know of that currently are working on and they deserve credits and thanks. We also have to note that before this work done there was quite a substantial number of people starting working on linux for our devices. Without them we may not be where we are today. So respect and credits to everyone involved in working on linux kernel for msm devices.
I am not responsible for any damages or problems your device encounters. The build is relatively safe and shouldn't cause any problems.
Dedicated threads
Dedicated threads for other devices running XDANDROID
Diamond500
Raphael800
Blackstone
Topaz
RhodiumThread1
RhodiumThread2
xda-developers signatures
For everyone posting on this thread about problems and issues, I urge you to please specify you're device or more conveniently update you're signature in control panel so it always has the details at the bottom of your posts.
FAQ
This has lots of Q&A and is recommended to go through before posting bugs and problems
XDANDROID project wiki huge thanks to sd73ta for hosting
Android questions and general FAQ
Connect-utb help section
RaphaelEclair-wiki
Media Scanner fix
For people who have problems with no having no ringtones, notification tones or general music problems look here:
MediaScannerFix
Waiting for SDCard error
For people who have problems with sdcard message, add this to your startup
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
Overclocking Android on MSM7K
MSM7K Android OverClock
XDANDROID boot-Animation | Wallpaper contest
XDANDROID wallpaper | boot animation contest
TheDeadCPU video for XDANDROID
XDANDROID initial-bootup
XDANDROID booting on HD2 NEW!
Thanks to
phhusson, zenulator, Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, bzo, captainoord, glemsom, balsat and anyone else who contribued or who i forgot
Thanks ben_duder for the awesome sig
Donations:
Please consider a donation to the XDANDROID project. We work on this on our spare time, even not on our spare times and every little bit gives us more inspiration and motivation to continue providing you our friends awww* great builds and support
Thanks to from me and phhusson:
R^7Z | auss81 | Sergej Philipp | Malte Lewan | suksanto | Tyler Brixey | axelo | ElbertF
w3bm4st3r | Kenny Maples | Daniel Krebs | Dan Colardeau | Ghostdogg | Gregory Thomas
Vincent Paoli | nim_ayyan | mindfrost82 | Olivier van der Kruijf | Robert Russell
Kamil Kowalski | Tobias Kästle | Scrog | Mehdi Bouzakri | Jay Onisch | Daren Scroggie
Robert Batty | James Frank | Matthias Helfmann | colo-natas
dcb.insomniacsoft.com | Alexis Perez | Ann Marie Steichmann | Cristian Pereyra
Adam Williamson | Benedikt Wieloch | Brad Stage | Paolo Vernazza | CDK Hosting
Haicheng Wang | Jonas Lejeune | Haicheng Wang | Jonas Lejeune
Adrian Kajda | Wilson Seto | Pedro Aragao | babijoee (yup, myself XD)
Spread the word about xdandroid, please feel free to use this sig created by ben_duder
Working:
Touchscreen:
Vibration:
Capacitive Buttons and Navigation wheel
Keyboard
Radio
Brightness Control: Must turn off autolight in WinMo
GPRS (thanks Phhusson )
Microphone works
Charging (phhusson )
Market
Sound ( Phhusson )
debugging breathing led for sleep mode: lets you know when your device is sleeping. This shouldnt affect your battery life at all.
Wifi: was always on when enabled. Now it is used alot less often so the device will be warm at most. (phhusson)
Task killer app.
Android information program.
Gsensor: fixed
Power collapse
Proximity sensor
ramzswap
idle sleep mode
deep sleep: Remove pm.sleep_mode=X from startup.txt if you have it in your default.txt
Accelerometer fix: Now very accurate and shouldn't cause your device to randomly change view. Thanks to mmone3
sms fix: yep the one you guys have all been waiting for ( thanks phhusson )
Android system wide Mic support. Eg: Voice dialer works. (phhusson)
14.01.10
updated apns.xml ( hopefully this should fix some 3g/GPRS issues people are having )
Fuze keyboard layout: (Stinebd)
Updated generic Raphael layout with better keymapping
15.01.10
Power off should work now (MrPippy)
Tested and working on Raph100. Raph110 doesn't work. Weirdly doesnt work for raph800. Please dont post bugs and errors about this or you will be flamed :3
Keyboard arrows for fuze, raph users should now work. (Stinebd)
Fixed layout for 500,800 CDMA
Mapped PTT button for fuze only. (Stinebd)
16.01.10
Old plus new apns.xml merged plus some extras.This should re-enable data connection people had before but broke now. For people who never had data connection this may help or may not.
New RIL: now has geolocation: (Chamonix)
Apps now separate for people who want to choose what to put in Android. Will be placed within AndroidApps folder
Live Wallpaper ( Battery drainer )
Matrix code
Bubbles
Star field
22.01.10
Proper Backlight control: dimming and controlling brightness. No need to change in WinMo anymore (phhusson)
Updated RIL: force cdma option, for cdma topa/rhod since we have no way to detect that they are cdma
Slow sim option to slow down SIM access, I think this might fix the problem of people having crashing android with bad sims (phhusson)
Updated apps
Startup cmds:
force_cdma=1
slow_sim=<time in microsecond to wait between every SIM access)
24.01.10
Clean Build
AndroidApps now consists of 4 folders
Ring Delay set to 0 from 3000 milliseconds
Updated startup configs
System is definantly faster when stripped
(Copy the applications you want to the root of AndroidApps. For people who dont know what core files to copy, i suggest you copy them all)
Core
Games
Media
Others
Nexus One media
Audio
Resource
2.02.10
touch screen calibration tool (makkonen & phhusson)
tilt2 keymap (adamw)
sensors for rhod/topa
LedEffect included in apps for diam/raph (chamonix)
Update by leobaillard
04.02.10
ShootMe ( AndroidApp to take screenshot via shaking phone )
Merging the massive apns.xml direcly pulled from my nexus one into current one. I hope fixes data for some people
Overall smoother scrolling. (Stinebd)
Rhod210 keylayout (adamw)
Double RAM implement in kernel.
08.02.10
hw3d ( MrPippy & Phhusson )
Ramzswap: ramzswap settings from user.eclair.conf are applied ( Phhusson )
Wifi changes ( Phhusson )
No longer need wifi calibration file. it's readen from nand, and is written to data.img ( Phhusson )
Updated ledeffects ( Chamonix )
Calibration file will be removed in future XDANDROID packages.
27.02.10
Bluetooth via new rootfs
Use Home++ as base launcher
Battery Indicator to show 1% increments in notification panel ( Note to ignore it in advanced task killer to keep service alive )
Topaz sensors added ( Markinus )
Latest updated rootfs
Removed gtalk, googlevoice for a very special members request
Added Genie widgit ( thanks for wpbcubsfan for extracting from nexus one )
Changed default lcd.density to 240. Majority android devices are using it even my nexus one
1.03.10
Slightly updated raph800 startup.txt ( Makkonen )
Slightly updated apns list for cdma networks ( Makkonen )
Readded gtalk, gservices apks
Removed topaz custom g-sensor and integrated with default one ( Markinus )
Updated Topaz startup.txt
Fixed Market downloads problem
31.03.10
Added DeskClock apk
Added calculator apk
Readded Gallery apk
Updated Home++, BatteryIndicator, Advanced Task Killer, AndroidInfo
Added OI file manager
Removed Astro File manager ( due to trial expiring and long waits )
Added updated version of Facebook
Updated STARTUP CONFIGS
Removed google Maps to save 3mb space
Bundled with balsat zImage autobuilds without debugging for speed
03.05.10
Based on Stinebd MSM 2.1 AOSP XDANDROID
Updated hosts file to block ads in apps (delta_foxtrot2. Updated version by phaelox)
home++, Battery Indicator, IO file Manager, Advanced Task killer, XDA forum app
Updated ledEffects (charmonix)
Nexus Boot Animation
Nexus media
Fixed Startup configs
11.05.10
GPS ( phhusson , cr2, jonpry )
31.5.10
Readded Google Maps since we have GPS support now
Replacing default Music app modd by cacheinjection
Adding new launcher LauncherPro 0.3.0
Removing home++ as i think LauncherPro is quite awesome
Updated xda app, advanced task killer, OI file manager, Battery Indicator
12.6.10
Updated APN list from cynaogen nexus one rom
Using LauncherPro beta as default launcher
Removing default launcher
Updating music application
Removing apps from /system/app to AndroidApps on SD
Implementing test boot animation from lugiber [ NOT FINAL ]
Removing BatteryIndicator as reading are not accurate and always jumping.
Updating startup files
Removing livewallpaper picker and livewallpapers as they dont work at the moment.
Support for non ascii characters
Nordic raph keylayout
Uploading ext2 file for people using ext2
21.6.10
Updated build.prop
Updated Launcherpro to latest
Added libspeech for voice search support
Added 3D driver for 3D support
Removed Advanced Task killer
Not Working
Camera/videorecord
Removed
light sensor
Added but not yet released
Terms and conditions
Enjoy and remember to post some feedback.
Downloads
Bundles
21.06.10 | 2.1 builds NEW!
XDANDROID.2.1.AOSP.21.6.10
The latest release of XDANDROID for AOSP 2.1 based on Stinebd AOSP build kitchen.
System
Old builds can be located here
htcandroid.xland.cz
4shared.com
Here is a repositories for older releases of XDANDROID and Android1.6 donut files
zImage Autobuild: ( glemsom / balsat )
glemsomAutobuilds
balsatAutobuilds
zImage are updated quite often but just because its updated, it doesn't necessarily mean it will work 100%. If a new zImage breaks and doesn't boot; load a previous working zImage. thanks
Rootfs Autobuild ( Stinebd )
RootfsAutobuilds
Get the latest rootfs here from the rootfs build service provided Stinebd for XDANDROID
Initramfs Autobuilds ( Stinebd )
InitramfsAutobuilds
Get the latest Initramfs here from the Initramfs build service provided Stinebd for XDANDROID
Others
WinMO/Android dual-boot
Yozgatg dual-boot
Yozgatg has released his dual boot WinMo / Android program for everyone to enjoy
LiteWM ROM to autoboot linux
LightNHB boot
MichyPrima has created a lite WinMo that automatically loads haret from your SD card. It loads pretty quick and i can confirm it works It has a boot option so just wait until you see Booting countdown and touch the screen.
Reboot, Shutdown, USB mass Storage and Continue Booting Android
CAB-Install for XDANDROID
Automated cab-install
TheBrilliantMistake has made a convenient program for people out there having installation problems with XDANDROID.
Have a look and see if you like it. If this proves successful we may roll out the updates like this in the future.
Chamonix ledEffects
LedEffects
LedEffects controls how your device reacts to calls, messages, charging and other phone status'
Guide
Place everything into the root of your sd card for Raphael and Everything in your internal memory for Diamond. Remember to copy the correct startup from the startup config folder.
It should look like this
--root--
\AndroidApps
\conf
\media
-haret.exe
-initrd.gz
-rootfs.img
-system.ext | system.sqsh
-zImage
-modulesXXXXXXXXXXX
-startup.txt
Startup|default configs options
Overclocking
acpuclock.oc-freq-khz=XXXXXX ( i use 600000 )
but it very unstable if you try to get higher than 650000-700000
Physical Keyboard layout
physkeyboard=fuze
physkeyboard=raph
physkeyboard=nordic_raph
physkeyboard=tilt2
physkeyboard=rhod210
physkeyboard=rhod100_de
physkeyboard=rhod100_fr
physkeyboard=rhod100_it
physkeyboard=rhod100_uk
physkeyboard=rhod100_nordic
physkeyboard=rhod400
physkeyboard=rhod500
Button wake up
board-htcraphael-navi.wake=X
0 = screen only wakes on power button
1 = wakes on any keypress
Onscreen terminal keyboard
msmvkeyb_toggle= (on/off)
on = displays terminal onscreen keyboard
off = hide terminal onscreen keyboard
Headset
snd.force_headset=X
1=USB headset
2=3.5mm headset
Incall volume adjust
htc_hw.call_vol=X
0-5
Enable/Disable handsfree
htc_hw.handsfree=X
1
0
Recommended best loud and clear voice values are said to be 5/1
htc_hw.call_vol=5
htc_hw.handsfree=1
LCD density / resolution
lcd.density=XXX
210 = 640x480 VGA devices
240 = 800x480 WVGA devices
Load Haret
Load haret by going into FileExplorer and navigate to where haret is and load it.
Navigation
Note: This is a dummy screen i took from google images Its not actually looking like this
1. Power Button
Press: Go home screen
Hold: Switch between Application
2. VolUP
Press: Increase ringtone, media and incall volume
3. VolDown
Press: Decrease ringtone, media and incall volume. Can also set vibrate and Silent.
4. Home Button
Press: Open up setting
5. Call Button
Press: Open recent call
Hold: Launch Voice dialer
6. Back Button
Press: Goes back one previous screen
7. Call end Button
press: Turn off display or end phone call
Hold: Set audio on or off, Airplane mode or turn off device
8. Center Button
Press: Accept or select. Also used as scrolling, zoom in or out.
9. Android Menu tab
Pull up or down to open / close Program tab
10. Notification tab
Pull up or down to open / close notification tab
11. USB
Plug in USB for adb, USB debugging, charging
Useful links
XDANDROID Facebook fan page
Stinebd blog
BugFeatures and Request
Phhussons git repo
Phhusson wiki
Nice to see someone contributing for the Raphael side of the forum, as i always felt why is support so good on the Vogue for Android? Why does Sense UI, most Android related etc. work on Vogue, well nvm. Looking towards the new build, nice work.
[email protected]
RAPH110 not working
I had tried it two days ago with kernel 2009-12-13 and the original files and got freeze at the setup screen on my RAPH110.
Procedure was as depicted and after deleting data.img.
At the top of the frozen screen there was the "no network" sign and I did not get the usual sounds of GSM network handshake in my loudspeakers so the hang seems to be in really early stage. That was weird enough to mention because on donut the radio turns on before the GUI comes up.
It could be Android initializing hardware that our kernel does not yet support. All i can think of is GPS and camera. But i'm going to stick with GPS for the time being. As data connections can be disabled and other hardware is at a functional stage.
my device is resetting at the android splashscreen, I had one time where I've seen the setup page. but then freeze and reset...
I don't know if its a problem but my diamond isn't detected in this build, it's detecting a vogue. So probably its loading false drivers?
the recognition is in the rootfs
These are really good news!
I'm glad to see some one looking into this! I own a raph100 and (needless to say) i got no further than you guys. But is there some way i can provide information? I'm no programmer but if there is any way i can help let me know!
/P
will try this on my diam100 ... i will only have to change the system.sqsh right ??? and keep all the other files
TQ
cruzzmz said:
will try this on my diam100 ... i will only have to change the system.sqsh right ??? and keep all the other files
TQ
Click to expand...
Click to collapse
I hope my guide was easy to understand . Its pretty much like any other build. The two main files are system.sqsh and rootfs.img. Kernel is always from glemsom autobuilds and the basefiles should provide the rest.
Razzee said:
my device is resetting at the android splashscreen, I had one time where I've seen the setup page. but then freeze and reset...
I don't know if its a problem but my diamond isn't detected in this build, it's detecting a vogue. So probably its loading false drivers?
the recognition is in the rootfs
Click to expand...
Click to collapse
same behavior when recognizing diamond.
is there a logfile anywhere or an option for one? so that we can see at what task it fails?
You can setup adb, which will let you see what task is being run. I've been reading into it and will set it up soon. As this would surely give us a better detailed diagnosis.
Eclair on RAPH100
Tested on my RAPH100 and got stuck on the setup screen too :-(
Offering a Diam100 to test
Hy guys! I offer a diam100 to test. Im not much of a programmer.
I offer my diam100 to do any test. At the moment i've tried and when i have "android" letters on screen, after 20 seconds the system reboots and enter into Windows mobile again. I'll be awake, every new version i'll try it and post feedbacks. Thanks for building.
Jordi
Spain
pik0n said:
At the moment i've tried and when i have "android" letters on screen, after 20 seconds the system reboots and enter into Windows mobile again.
Click to expand...
Click to collapse
Same problem here, after the SMD ch 0 closing -> opening and SMD ch 0 opening -> opened messages it resets.
I haven't tried the kernel flashing from the androidinstall package, for I'm a bit scared to brick my phone (though I'm not scared to flash it when I know it's quite safe )
Greetz
p.s. running on wm 6.5.3 (28011) if it matters.
Anyone have any luck with ADB, Windows7 and XP both say the android is an unrecognized device and it won't allow me to use the usb_android drivers that came with ADB.
jamen said:
Anyone have any luck with ADB, Windows7 and XP both say the android is an unrecognized device and it won't allow me to use the usb_android drivers that came with ADB.
Click to expand...
Click to collapse
nvm, i was missing 'board-htcraphael.adb=1' in the startup.txt almost got it working now!
it's pity i can not download all files.
Hi, since the kernel is shared between raph, diamond & blackstone, I tried it on my blackstone.
It did not work either, but I managed to save the debug output.
I've attached it here, in case it helps you.
aavan said:
Hi, since the kernel is shared between raph, diamond & blackstone, I tried it on my blackstone.
It did not work either, but I managed to save the debug output.
I've attached it here, in case it helps you.
Click to expand...
Click to collapse
What occurs to me is:
Code:
12-18 13:35:09.058: INFO/ActivityManager(160): Start proc com.android.setupwizard for activity com.android.setupwizard/.SetupWizardActivity: pid=221 uid=10023 gids={3003}
12-18 13:35:09.228: ERROR/jdwp(221): Failed sending reply to debugger: Broken pipe
and later at the end:
Code:
12-18 13:35:17.428: DEBUG/BT HSHFP(210): Starting BluetoothHeadsetService
12-18 13:35:17.478: DEBUG/MobileDataStateTracker(160): default Received state= DISCONNECTED, old= DISCONNECTED, reason= gprsDetached, apnTypeList= default
12-18 13:35:18.438: DEBUG/GoogleLoginService(243): onBind: Intent { cmp=com.google.android.googleapps/.GoogleLoginService }
12-18 13:35:18.458: DEBUG/dalvikvm(210): GC freed 3317 objects / 237640 bytes in 895ms
12-18 13:35:18.528: WARN/GoogleLoginService(243): Device has no accounts: sending Intent { act=com.google.android.googlelogin.LOGIN_ACCOUNTS_MISSING }
It looks like the last sequence of actions were to find out there is no google account set up, with the reaction to call the Intent googlelogin with LOGIN_ACCOUNTS_MISSING. I guess the right reaction to that would be to request for login data.
Not that does not seem very hardware dependent to me so I'd rather bet the the freeze is due to something initiated earlier, maybe "Starting BluetoothHeadsetService". Looking at what happens in that process (pid=210) this looks like a weird path:
Code:
12-18 13:35:16.008: DEBUG/(210): unable to unlink '/data/data/com.android.phone/shared_prefs/_has_set_default_values.xml.bak': No such file or directory (errno=2)
Where is /data mounted and was there something created in /data/data?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Tiamat Xoom Rom
This rom does not support 4G devices. DO NOT FLASH THIS IF YOU HAVE A 4G device.
This rom is presented to you buy the following winners:
solarnz
bigrushdog
Lowtraxx
MAD Industries
Nusince
Phokus
chrisryn
Special mentions:
Roach`- Without him, we would be nowhere!
Kelvie - Thanks for the wpa_supplicant
Everyone in #xoom for helping me test and all round support, you guys are amazing
The Synergy mod team and Treve for the various binaries we used from you guys, thanks
The cyanogen mod team as their source made implementing our quick controls a lot easier.
And now the rom!
Rom Features
This is a completely deodexed rom, based on the 3.2 wifi system image. However just because Google and Motorola haven't released 3.2 for the verizon xoom that doesn't mean we don't support it! Thats right. We support 3g devices on 3.2 before Google have even released it.
EPIC features
Quick Controls aka statusbar controls / "Zeus mod"
Tiamat settings
NATIVE 3G SUPPORT
SDCard support via mtp. NOTE: your sdcard will now be at /mnt/external1
Modified application permissions to allow applications that can write to /sdcard to write to /mnt/external1
USB OTG (On The Go) support. Your usb drives will now be mounted automatically under /mnt/usbOTG
Android media services scan both internal and MicroSD for media (Gallery, Music, etc)
Fast boot times. Your boot times are simply amazing with this rom!
Complete localisation support. This means that we have complete support for european devices and their languages.
Screenshot support
General Features
Powered by Tiamat Kernel Tachi 2.1.0 (stock gpu).
Pre rooted with su and Superuser
Pre-installed busybox and iwmulticall.
Desktop UA String
Modified battery images & animations.
Wi-Fi Ad-Hoc Mode
Quickboot
OSMonitor
Advanced Features:
Init.d boot scripts enabled
OpenVPN binary and script - Credit CyanogenMod
Applications files (apk) located in /data/tiamat_first_boot_install will automatically be installed.
Applications are zipaligned on boot
Cron service
Important Notes : A MUST READ
Your microsd card is now mounted at /mnt/external1. You will also be able to access this via MTP.
If you're not on hammerhead, you need to perform a factory reset first.
This rom supports all wifi devices, US Verizon 3g devices and European devices.
Installation Instructions
Prerequisites: Clockworkmod Recovery card for installation.
(Only 3.2.0.0-R4C with an sdcard has been tested but all other cwm based recoveries should work too)
OPTIONAL, BUT RECCOMENDED: Backup your internal applications with Titanium backup
Download the 2.2 rom zip file and place it on your external sdcard
Restart into Recovery
Perform a nandroid backup, and keep this safe!
Perform a factory reset within recovery (Wipe data / factory reset) This is only required if you're NOT upgrading from hammer head.
Install the rom
Welcome to the party
Download Center
2.2.2
Tiamat Xoom Rom 2.2.2 "Moray"
MD5sum: b8a2ca18954e63dad5aa6e704461ce9c
2.2.1
Tiamat Xoom Rom 2.2.1 "Moray"
MD5sum: 24c2afbade388cfb7a8d62b7fcef668d
2.2.0
Tiamat Xoom Rom 2.2.0 "Moray"
MD5sum: 50d5f7409dc865b29b67e213ff8cae5b
Bug reports & Feature requests
Forums are horrible for keeping track of bugs and feature requests. If you have a reproduceable bug, or a feature request, please create an issue for it at http://code.google.com/p/tiamat-xoom-rom/issues/list
Release Notes
2.2.2 Release Notes
Yet another update for the rom. Quite a few changes this time.
As usual, this can be flashed cleanly over 2.2.1.
-- solarnz.
2.2.1 Release Notes
You are able to flash 2.2.1 over 2.2.0 as it is mainly just bug fixes.
-- solarnz.
2.2.0 Release Notes
Boy has it been a busy last 2 weeks.
I have built a build system where we now do the majority of our coding in java. Yep java, not smali.
We now have quick controls, in the status bar settings menu.
This rom is mainly just a feature release. Unfortuantly if you had any issues regarding gmail in hammerhead, you will likely get the same issues in this release.
This rom is also still based of 3.2. Yeah I know I said I would be doing 3.2.2, but things change.
-- solarnz.
Changelog
Version 2.2.2
The browser UA string setting now sticks.
Reverted to the stock User Agent string.
Bluetooth tethering work-around
Removed the DigiNotar certificate (3.2.1)
Updated the market application (3.2.1)
New setting to load every module on boot (disabled by default)
Disable OTAs by default. You can turn them back on through the settings.
Ability to completely disable the software buttons through
Ability to turn on the european wifi channels in the settings menu.
Version 2.2.1
We now use the GMail.apk from the Asus Prime rom.
Re-implemented the shutdown (power) menu.
Brought in DSPManager from cyanogenmod. You can also access this through the Music2 Application.
Fixed various force closes in Music and Clock applications.
You are now able to enable wifi & bluetooth via quick controls while airplane mode is active. You will need to enable this through the quick control settings first however.
Disabling rotation in the quick controls will now freeze the rotation of the screen, instead of locking at the landscape position.
New adbWireless quick control
More support for the Hong Kong partition layouts.
Overclocking will now write the values to both cores.
Version 2.2
Quick Controls
Tiamat Settings - set your overclock on boot, and many more!
Extra command line applications - nano, powertop etc
Bash is now the default shell
New Wireless, Mobile and battery icons from bignadad
Browser now has a selectable UA string in the general menu, no more enabling the debug mode.
OSMonitor is now included.
There is a nice fortune displayed on the lockscreen now.
New boot animation by phokus
More stuff I can't remember
Version 2.1
Fixed all the application signatures - Google applications should update fine now.
All of the language packs are now incorporated into this rom
European 3g support should be 100% working now.
Native screenshot is back
Version 2.0.1
Replaced the battery icons with new ones from Nusince
Updated the maps application. NOTE: This is just a temporary fix, and we are working on a permanent fix.
Fixed up the euro build.prop
Version 2.0
Rebased off the 3.2 wifi image.
3G Support on Android 3.2
sdcard is now at /mnt/external1 and is viewable via MTP
Any application that can write to /sdcard can now write to /mnt/external1
usbOTG drives now mount at /mnt/usbOTG and act identically to the sdcard.
Now comes with the Katana 2.0 stock GPU kernel.
/MicroSD and /usbOTG synlinks to their respective locations in /mnt
Automatically modprobe all kernel modules, apart from the wireless module.
New wallpaper & charging icons
Version 1.1
Storage framework completely overhauled based on Transformer Rom Prime 1.5 (thanks Roach)
System now gives storage control thru status bar icon and in Settings / Storage
Unmount MicroSD, remove, put in another one for working Hot Swap
Automatically mount USB Host storage (unmount still broke do to borked vold.fstab)
All Android media services scan both internal and MicroSD for media (Gallery, Music, etc)
new native Transformer file explorer accessable thru status bar to explore all mounted storage
Unfortunately, USB Mass Storage is still broke. (It's turning out to be far more complex than it should be)
Entire rom re-signed with test key due to manifest changes for storage port. All services work 100% (Google music beta, Market, etc)
Implemented a variety of init.d scripts with "Tiamat Control" flags
Enable features by moving flags (/data/tiamat_controls) in or out of "unused" folder
Enable or diasble charging light while device on
Enable or disable logging for better battery life
sysctl memory tweak
Cron service enabled for time based scripts (put Cron scripts in /data/cron)
Rom zip-aligned on boot (still insanely fast boot time)
Included up-to-date Maps.apk and Video.apk
Removed bloatware (Cordy.apk, dungeondefenders.apk, and stingrayquickoffice.apk)
Changed back to mostly stock icons
Removed the charging percent text from the pull up settings.
When charging, it will now alternate between the battery percentage in the middle and a charging symbol.
Version 1.0 - Update 3 (Busybox fix)
Fixed the dependency that the ramdisk had on busybox, specifically run-parts.
Version 1.0 - Update 2 (charging light)
Enabled the led charging light in the ramdisk as per popular request.
Version 1.0 - 3g fix
Fixed permissions in /system/bin. This was causing issues with 3g connections.
Replaced framework-res.apk with a less modified version. There is no SIP calling and sms now, but the activation screens work now.
Tips
Automatically installing applications when you flash the rom:
In the zip file, under the directory "data" there is a directory called "tiamat_first_boot_install". You can place all of your apk files that you want installed when you first boot in there. This is useful for applications such as Thumb Keyboard and Titanium Backup
Moray 2.2 Modpacks
All of these mod packs can be flashed over the top of an existing Moray installation unless advised otherwise.
Mod pack 3 : Disable OTA notification ONLY FOR 2.2.0 & 2.2.1
MD5Sum: dd6291c50b815826ec18ee8acf89fa2c
Mod pack 2 : Stock User Agent String. ONLY FOR 2.2.1
MD5Sum: f795a79a37d811b9fe5464f393097c9d
Mod pack 1 : Stock User Agent String. ONLY FOR 2.2.0
MD5Sum: 9f0b2a117c3e2a578cccad5207f24851
Moray 2.2 Screenshots !!!
Tiamat Xoom Bactrack 5 Power User Expansion Pack
errr...where is the download link....
EDIT : Downloading now.....
Awsome, Really tks.
download link.......
Looks really solid guys, thank you for all of the hard work that makes my xoom so happy!
big tks,
waiting for download link
You guys are awesome running really good..
Thanks
1. setting alarm bug still exists.
2. In stock web-browser, when a type a random word on address bar , "xoom" for instance, then i hit "enter" , it does not automatically launch google search for "xoom" ?
Is this based on HC3.2.2 ?
tritran18518 said:
1. setting alarm bug still exists.
2. In stock web-browser, when a type a random word on address bar , "xoom" for instance, then i hit "enter" , it does not automatically launch google search for "xoom" ?
Click to expand...
Click to collapse
Yep, sorry I wasn't able to fix these issues. Hopefuly in the next release
daveba said:
Is this based on HC3.2.2 ?
Click to expand...
Click to collapse
Nope, still 3.2 sorry.
Argh I'm in work now
It will be another half of a day before I get myself some Moray goodness...
tritran18518 said:
1. setting alarm bug still exists.
2. In stock web-browser, when a type a random word on address bar , "xoom" for instance, then i hit "enter" , it does not automatically launch google search for "xoom" ?
Click to expand...
Click to collapse
Also have alarm bug ....but the browser one I do not get what u mean...I used the home screen top search bar....the browser address bar.....and the regular broswer search bar ...hit enter from keyboard and they all work fine.....I also did a fresh install ..so who knows
Sent from my HTC Sensation 4G using xda premium
Tito2007 said:
Also have alarm bug ....but the browser one I do not get what u mean...I used the home screen top search bar....the browser address bar.....and the regular broswer search bar ...hit enter from keyboard and they all work fine.....I also did a fresh install ..so who knows
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
OK, my browser problem is solved after I change my homepage to google.com and set UA string to desktop.
First impression : love the water boot animation. Still loading the boot animation.
EDIT : Done booting and saw new signal and battery icon. Nice. Only, when word '3G' nicely placed beside the signal. Only word 'H' overlapping with the arrow signal.
nice to see the the SD card persmissions are fixed!
Appears that the autorotation setting is broken... it will either toggle "on" or "upside down"
also torch doesnt appear todo anything
is the wifi dropout bug fixed in this release?
Sent from my Xoom using xda premium
mynameisjon said:
nice to see the the SD card persmissions are fixed!
Click to expand...
Click to collapse
May I know what you mean by 'SD card permissions are fixed'? Do you mean SD card is internal or the microSD card? Because I cannot delete any files inside microSD card except after changing the right using MicroSD Mounter.
Works fine so far.
When opening Music and switching to Genre or Interprets the Music App FC's.
It will do that until Force Stop and Clear Data from within the settings.
The Log mentions that the Error hast something to do with the piled Album images.
... MusicAlbumWallCallback.onRequestPileLableTexture(MusicAlbumWallCallback.java)
Android 2.3.7 - Cyanogen Mod 7.2.0 For Galaxy GIO
I am not responsible for any damage to your phone
From 2012-03-25 i change this version to Like NIGHTLY. why??? because this version is most like vanilla build from CyanogenMod team.
i only changes alittle code to make this rom perfect on our device.
So, dont request unofficial feature to this rom
My target is to make stable, fast & good power comsumption rom[/CENTER]
Current status:
Working:
RIL
proximity sensor
touchscreen with multi touch
keychar
storage mode
gps
compass
accelerometer sensor
microphone (both phone & headset)
headset button
Root & Busybox
call,sms,mms
auto rotate
packet data with automatically apn detect
GPRS, EDGE, 3G, HSDPA
wifi
hardware video acceleration
secret code
bluetooth
camera
static wifi mac address
audio & FM Radio
wired & hotspot tether
Backlight Notification
Not Working:
Sim Toolkit (maybe)
known issue:
some option are not working on setting (like: mute camera sound, etc)
slow loading png image on gallery
after use camera, governor force back to "ondemand"
Download link:
ROM
You can download from goo-inside.me
Patch
WARNING: you must choose select correct patch, depend on your rom!
Note: you only need to install latest patch for your rom. latest patch included all change in previous patch
Patch for CM7.2-02112012
patch-CM7.2-02112012-1.zip [OUTDATED]
Patch for CM7.2-RC1-b1
CM7.2-RC-1-patch-4.zip - (2012-01-30) [OUTDATED]
CM7.2-RC-1-patch-3.zip - (2012-01-28) [OUTDATED]
CM7.2-RC-1-patch-2.zip - (2012-01-20) [OUTDATED]
CM7.2-RC-1-patch-1.zip - (2012-01-20) [OUTDATED]
PLEASE DO NOT MIRROR MY LINK
Source:
https://github.com/phiexz
Special thanks to:
CyanogenMod team
amarullz for Fantastic Aroma Installer
squadzone
ketut.kumajaya
psyke83
Maclaw
Donator
Nur Ahmad
T. William
go to next post to read changelog & how to install
How To Install
Flash latest Clockworkod Recovery:
skip this step if you have latest clockworkmod installed on your phone
Download latest ClockworkMod Recovery from This thread
Place it on root of your sdcard
reboot to recovery mode
install this cwm from recovery
Flash Cyanogenmod 7 ROM :
Download and copy the latest CM7 ROM to SD Card
Reboot to Recovery Mode
Select install zip from sd card
Select choose zip from sd card
Select the new CM7 ROM
Select Yes - Install update
Wait till the Installation is finish
Select reboot system now
NOTE:
It's not automatically wipe your data. if you want to install fresh rom, you must wipe data before install it!
If you from stock / custom rom based on rfs filesystem, u must flash ext4-formatter.zip before flash CyanogenMod. link & instruction can fount on This Thread. otherwise you'll stuck on android logo because it cant mount rfs filesystem!
have problem after upgrade from earlier cyanogenMod? you should wipe your data!!
Install & Enable a2sd Darktremor
Download dtapps2sd-2.7.5.3-beta04-signed.zip
Reboot to Recovery mode
mount your system & data, then Install it
After install, reboot your phone. it'll make your phone bootloop for 2-3 times
For Activating it:
go to terminal emulator and write:
su
a2sd zipalign
a2sd cachesdreset
if u want use a2sd extream (move data to sd-ext):
a2sd datasd
Install & Enable Simple2Ext (S2E):
install it from market. be sure u've install gapps before!
open s2e, and press menu and choose setting
checklist the advance mode, extended partitions info, mount as ext4
DON'T CHANGE READ BUFFER!! IT CAN MAKE YOU PARTITION CORRUPT
press back, and press menu -> reboot
if your phone not automatic reboot, u should reboot it manually
after reboot, open s2e again. u can check whatever u want
i'm check it all, except Application data (Application data = a2sd extream datasd)
reboot again
NOTE: if you cant activate S2E, i think your 2nd partition is corrupt. try to repartition it from PC
Changelog & Download Link
[ROM] patch-cm7.2-20120426.2-NIGHTLY-gio.zip
Revert some samsung's prebuilt library
Fix Audio routing to headset
Add missing sec_key keychar
[ROM] patch-cm7.2-20120426-NIGHTLY-gio.zip
update samsung's prebuilt binary & library
fix unstable ril daemon when in 2G mode
[ROM] patch-cm7.2-20120422-NIGHTLY-gio.zip
FIX: Video HW Acceleration
[ROM] CM7.2-20120421-gio-NIGHTLY-AROMA.zip
Changes by me:
AROMA: Update Aroma Binary
Change Experimental Kernel to v20120420
Many Changes on Experimental Kernel
Remove Disable SetupWizard.apk
Fix disable YouTube Function
Update Goo-Manager App to v2.0.2
Update prebuilt library & modules
Fix camera info
More: http://github.com/phiexz
Changes by cyanogenmod Team:
fix "Skip on security" functionality
Allow theming of framework UI elements.
Fix Quick unlock bug
Fix Quick unlock bug
Update & Add many translation
Improove webkit (Let me know if u have problem with browser)
Improve GPS
and more, you can check it here and here
[ROM] CM7.2-20120325-gio-NIGHTLY-AROMA.zip
Changes by me:
AROMA: User can select theme
Add more apn
remove unneded tweak, more vanilla
update dhcpconf
goo-inside.me OTA support
fix libaudio (mute on call). by psyke83
Big update for kernel
kernel: 800Mhz instead 806Mhz
kernel: Default clock is 800Mhz now, instead 787Mhz
kernel: A lot tweak for improve performance
kernel: Add Zcache & frontswap. better memmory management
More: http://github.com/phiexz
Changes by cyanogenmod Team:
Ipsec-Tools: racoon: introduce authentication method parameter
Skia: improve API
Zlib: Update to version on adler32/slhash repo as of Mar 07, 2012
Framework: implement Motoblur-like fingerprint tactile feedback
ADW: add sortable apps list for catalog setup
CMParts: Add option to enable/disable the ICS rotation animation
Contacs: Fix soft keyboard appearing on dialer under certain conditions.
Contacs: Fix initial state for t9 sort mode
MMS: Added a max SMS length option
MMS: Fix cursor repeatedly moving back to beginning of To field
Phone: Improve toast strings
MediaProvider: Backport "disappearing SD media" fixes from CM9
and more, you can check it here and here
[ROM] CM7.2-03092012-gio-KANG-AROMA.zip
Changes by me:
Using AROMA Installer to install ROM
NB: if you use px-recovery, please update to verison 0.28
Include 3rd apps & setting for customize rom
Include latest Google Apps
A lot of change on kernel-20120309 from squadzone
improve libaudio. by psyke83
Changes by cyanogenmod Team:
Added many translation
Added build time on system info
Many bugfix, more stable
and more, you can check it here and here
[ROM] CM7.2-02242012-gio-KANG.zip
Changes by me:
remove unused tweak
cpufreq: tweak ondemand cpufreq
update libaudio from CodeAurora, thanks to psyke for fix libaudio for FM Radio & Mic
lib: add libmmomxcore & use libOmxCore from samsungs
improve gallery, but sometime still have issue with .png image
wlan: using official atheros tools, remove get_macaddress
sd-ext: now always mount as ext4. this change should fix any problem with S2E but not tested
updater-scripts: unmount before formatting device. this change for anyone who use px-recovery
Filemanager: Using source from squadzone. fix send files from filemanager
Changes by cyanogenmod Team:
fix alarm freeze on landscape mode
fix rotation freeze on screen off
and more, you can check it here and here
[Patch] patch-CM7.2-02112012-1.zip
L]
Working with Camera.apk
Fix video capture orientation
Remove wide option from video capture mode
[ROM] CM7.2-02112012-gio-KANG.zip
Many patch on kernel for better performance
Framework: Improved cached
Framework: Add screen rotate animation from ICS
Many new option on setting (Tablet tweak, lockscreen style, disable scrolling cache, custom carrier label, lock volume key, bootanimation, power button end call, and many more)
Fix: fixed wired tether. now not need 3rd application like wiredtether.apk (tested on my archlinux)
Fix: Create & Loading thumbail on Gallery3D. now much faster. but sometime slow on png image
Fix: Screen flickering when turn on phone & disable screen on animation
IMPROVE: 100% rendering use GPU
IMPROVE: more snappy rom
IMPROVE: better ram management
and other
[Patch] CM7.2-RC-1-patch-4.zip
[Download]
trying to fix screen on blinking (when u disable screen on animation), but sometime still blinking
sensors hack, it should decrease gmaps v6.x lag. please test it. not tested by me
now using RGBA8888 color
[Patch] CM7.2-RC-1-patch-3.zip
[Download]
reworking again with camera driver on kernel, please check about orientation now
change camera app with modded camera.apk by squadzone
fix Droidwall problem (please check)
screen on animation (enable it from cyanogenMod setting)
[Patch] CM7.2-RC-1-patch-2.zip
[Download]
fix charging when phone turn off
[Patch] CM7.2-RC-1-patch-1.zip
[Download]
fix camera orientation driver from kernel. include with new official camera.apk from cyanogenMod. yesterday we used unofficial camera.apk
improve video recording, now using AAC instead of amr for audio
change local version to perf-CL783107, included module for CL783107 (wifi,zram,tun & cifs)
improve usb mass storage stability
patch usb composite.c, hope will fix usb tether problem
[ROM] CM7.2 RC-1-b1
[Download]
Added many option on cyanogenMod setting
Change device name from GT-S5660 to gio
Fixed many bug
disable live walpaper by default, because live wallpaper make cpu & gpu extra work, hot & drain more battery
added lagfree & lulzactive governor
added 672Mhz cpu scalling
patch backlight to fix backlight problem after set brightness
added Backlight Notification (BLN) support. use bln controll to set it!
patch libaudio for better audio. please check it and let me know your opinion. is it better or worse?
Change hardware name from GT-S5660V to GT-S5660
[ROM] CM7.2 RC-0-b2 to b4
Please go to [DEV][2.3.7]CyanogenMod 7.2-GIO-KANG-RC0 build 4 thread to see changelog
[ROM] CM7.2 RC-0-b1
[Download]
First build cyanogenmod 7.2 rc-0 from source, with many bug & problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloading
I will be a tester.
---
Found bug :
1. Bluetooth can't received file from PC.
2. Can't sign google account in account settings.
3. android.process FC for 2 times.
4. Backlight always on (maybe the kernel?)
5. As phiexz said, camera wrong orientation.
---
i don't know what is the changelog from 7.1.0 RC 3.0. Galaxy Ace thread says that the changelog is under the hood (maybe the performance), not the cosmetics (appearance).
Downloading. Will install later and post any issues.
Can i upgrade directly from RC 3.0?
下载中，待会测试download and test
Culfa said:
Can i upgrade directly from RC 3.0?
Click to expand...
Click to collapse
Sure, i upgraded it from Rc 3.0
Upgraded from 7.1.0 RC3.0. Everything seems to work except the camera orientation. I've noticed a faster connection to the GSM and 3G network. In RC 3.0 it ometimes took ages to get a connection.
Is it non wipe like CM7 nightlies...
I dont want to redo everything again just to test...
I dont have problems with the previous version, but it is my second phone, only use SMS, calls, bluetooth, wifi and market...
gps
1. Gps not working, not even shows the icon in notification bar.
2. After a call, the screen remains blank, the proximity sensor have issues.
Back to RC3
fantastic! fast update
i want to try it, but not now
tried to install from rc 2. having troubles: at the boot appears a "android" logo and then nothing else. returning to rc2
ItachiSama said:
tried to install from rc 2. having troubles: at the boot appears a "android" logo and then nothing else. returning to rc2
Click to expand...
Click to collapse
i also had this, try re-running the zip in recovery agn, and reboot it a few times. i did this and it was okay.
Thanks for your reports about the bugs.
By the way, just for info.
I, friend of phiexz want to say this. Maybe phiexz will probably take a little longer time to fix the bugs because of his busy in college. He has so many task to do for his college, so he asked our help to find the bugs on 7.2 and post it here. Once he is not busy anymore, he will fix the bugs for us.
So, we have to be patience.
ok, because not many reacted on the update test, i just installed it over the RC3 without wipe or anything.
First look was ok, but no apps that where installed, so i rebooted again, and all is working, what was already on the phone.
Yes, camera has lost its direction and barcode scanner too .. but heck we know that ... link2sd still ok, wifi and 3G working, root explorer and google / gmail, Go contact, sounds market still working ... so no complaints yet ... other then the known issues oh wait Angry birds seasons still works !!
small correction, Gmail settings did not remember to synch email, but ticked that option again and its working
Correction (and wierd!) Qr scanner works ok (applied the fix on RC3) so cam scks but barcode scanner works
I cant connect to google account.
Fast discharged baterry, if I use only wifi, and 3G and screen light on 25%, 1% baterry per minute, its very bad. If screen is off, and locked, everything with baterry its okay (baterry is after callibration).
I not prefer ADW launcher, because it is slow, i Installed GO Launcher, and it is very faster than ADW on this ROM.
I've not found other bugs.
yonzz said:
Thanks for your reports about the bugs.
By the way, just for info.
I, friend of phiexz want to say this. Maybe phiexz will probably take a little longer time to fix the bugs because of his busy in college. He has so many task to do for his college, so he asked our help to find the bugs on 7.2 and post it here. Once he is not busy anymore, he will fix the bugs for us.
So, we have to be patience.
Click to expand...
Click to collapse
Thanks for the update.. Tell him to take his time.. Remember, the only rule on cyanogenmod, you don't ask for ETA.. ..
Camera and WiFi-mac fixed by me.
I'll upload new package soon.
Now it's fully functionally - only proximity sensor doesn't works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Banner by Sebianoti
Me and rogro82 started to port Android 4.2 to the HTC One X
Working
Wireless
Phone calls
GSM Data
Audio
Video Playback (including HD)
Camera (no photosphere - blame google)
GPS
NFC
Bluetooth
BT and Wireless tethering
Not Working
USB tethering (?)
Installation instructions
BACKUP YOUR DATA (using CWM)
Verify that your backup is complete - a backup of your sdcard may also be a good idea (see below)
Verify that you are running hboot 1.26 or newer (hboot 1.39 is recommended)
Download the ZIP and the boot.img (see Downloads)
Copy the .zip to your sdcard and reboot into fastboot
fastboot flash boot boot.img, then boot into recovery
WIPE your phone (this is not optional)
Install the .zip and reboot
Upgrading
You can always upgrade to a newer version without wiping any data, formatting system or wiping the cache.
But keep in mind that you must always flash boot.img + re-flash gapps after upgrading
Changelog
RC20 (20130825)
Fixed the two Android 'master key' bugs
Kernel patch for CVE-2013-2094
RC19 (20130317)
Merged CMs audio volume patch (http://review.cyanogenmod.org/#/c/33778/)
Changed gps.conf to use pool.ntp.org (they use geodns - why isn't this the default dear google?)
RC18 (20130311)
Option to control button backlight depending on the screen brightness (Settings -> Display)
Software fix for pabx's broken headphone jack detecion: Added an option to forcefully route mediaplayer-output to the headphone jack. (Settings -> Audio)
RC17 (20130301)
Use latest WIFI Firmware (improves reception)
RC16 (20130216)
Added ro.adb.secure=1 to build.props. The phone will now only accept ADB connections from authenticated hosts. Note that you must upgrade your local ADB installation to the version included in the 4.2.2 SDK. Connecting with an pre-4.2.2 adb will not work
Fixed quicksettings: longpress = toggle, press = settings
Internal: Use CMs nicer audio-recording patch
RC15 (20130213) Android 4.2.2
Upgraded to Android 4.2.2_r1
Silenced vibrate kernel driver + removed unneeded pm_qos request
RC14 (20130208) Kernel 3.1.10
First release with Linux 3.1.10. Note that you MUST upgrade your hboot to 1.3x (1.2 versions may work - any feedback is appreciated, but any version < 1.2 will NOT work - your phone will freeze during deepsleep!)
Mounting USB-OTG devices on 4.2 is somewhat tricky as filesystems are not shared with 'parent' processes - using some userspace app like 'Nexus Photo Importer' is recommended
Switched to ondemand govenor as the old 'interactive' is broken in HTCs Linux 3.1.10 source drop (doesn't make a big difference)
RC13 (20130202)
Merged missing cam pull request
Option to change the max frequency in settings (Developer Options -> CPU Frequency)
Improved frequency management - say goodbye audio dropouts!
RC12 (20130122)
More camera options (jpeg quality, burst mode, scenes) - thanks to seadersn
Option to enable the overflow button
New hardware button mapping profile: press = tasks / longpress = menu
RC11 (20130114)
Support for encrypted /data partition. (see this post)
Ability to limit the max CPU frequency (see this post)
Enhanced included Camera App (thanks to herrvorragend23)
Include SimToolkit
Option to change the Home + Menu longpress behaviour (Settings -> Display)
RC10 (20130104)
Support for big /data partition. This is experimental, see this post
Mount /data with '-o discard'
RC9 (20121229)
Added 'volume rocker' support (disabled by default -> settings -> sound)
Bluetooth Audio (A2DP) is now working
Stubborn BT devices should now be able to pair
RC8 (20121225)
Fixed WIFI Tethering
Changed halo background
RC7 (20121220) Doomsday edition
Bluetooth Tethering support (still a little bit flaky, try to re-enable bluetooth + tethering if the connection drops)
Changed quicksettings behaviour: Short press = toggle / Long press = open settings
Reboot + Screenshot options in Power-Off menu (thanks to lownoise2)
RC6 (20121219)
Support for Bluetooth file transfer and HID (Again: thanks to rogro82)
AUDIO AND INTERNET SHARING VIA BLUETOOTH ARE CURRENTLY NOT WORKING
RC5 (20121215)
Audio recording fixed (Send your thanks to rogro82)
Developer-Options enabled by default in Settings
Display internal + sdcard storage in Settings
Improved holo-background gardient
Switching from/to 2G-Data-Only works without reboot
'Silent' GSM-Data drop is hopefully gone
RC4 (20121211)
Camera support Install this if the camera icon is missing in your app drawer
RC3 (20121209)
Paid applications can now be installed using Play Store
Unity engine based games work correctly
Hboot 1.3x support
RC2 (20121202)
Multitouch fixed
Based on Android 4.2.1 (December fixed)
HD-Videos (OMX) working
RC1 (20121126)
Include Email.apk
Fix google location service provider (google now / gmaps)
Download links (always flash boot.img!)
http://blinkenlights.ch/static/android/endeavoru_42/latest/ (Primary host in Germany)
http://android.eqmx.net/android/endeavoru_42/latest/ (Mirror in Sweden)
Gapps download
NEW http://goo.im/gapps/gapps-jb-20121212-signed.zip
IRC Channel
Join us at #tg-endeavoru on Freenode irc
FAQ
I can not upgrade my hboot to 1.3x, help!
You can still run RC13:
This was the last release using Linux 2.6 and will therefore work on older hboot versions. RC13 is stable enough for everyday-use.
What kernel should i use?
Use the stock kernel from boot.img - there is nothing wrong with it. Using a different boot.img or/and kernel will just break stuff.
Even more links!
https://github.com/adrian-bl-hox-jb/android
https://plus.google.com/115564237657785223556/posts
For people wondering:
Although its an AOSP build it does have multi-user support which originally is only available on tablets in AOSP ( users can be added in settings )
Will try it as soon as links posted, thanks for your work! Can't wait for some of the important things like camera to work.
Will have to give this one a shot. Looks very interesting, even though there's some major flaws. Official CM10 has never been stable on the HOX, so looking for alternatives. AOSP might be the solution, in the long run (not currently in that state ).
Good luck with the upcoming work, attempts, hacks, tweaks etc.!
EDIT:
1. You can add NFC to the list of working things. Just tested it with a tag.
2. The performance of the ROM seems very snappy and nice. Just because of it I had to take a few benchmark tests, and yeah, the ROM performs! https://docs.google.com/spreadsheet/ccc?key=0Api2mSgk7cfUdENKWWVqNnUyS013dnJpMGxNQXZxeEE (oops, wasn't made public at first)
Generally about Android 4.2 and its new quick settings (QS):
I wonder why Google doesn't allow us to reorder the grid (by long pressing on the items, much like on their launcher; folders). Would be great if one could add or remove buttons too. Personally I'd like to add GPS + NFC and remove 'Airplane mode'. When tapping on the items their respective activities is started. Convenient sometimes, but it makes QS pretty much useless... On/Off toggling would've been the preferred way I think. Much like how the Airplane mode button works... it doesn't even ask the user if the device should be put in airplane mode (which I think is pretty vital).
Voted to XDA News page
5 Star'd
Keep up the good work Gentleman
Definitely wanna try, but will probably wait until it's a little more stable.
Needed to rename rc0.boot_img to rc0boot.img (really any .img name would work) but otherwise booting fine straight over the top of latest CM10 nightlies. I'm no dev, but love being on the bleeding edge
M.
booting, working fine, confirmed call, data, sms, multi users... will put my mirror up tonight or tomorrow
MashineGun said:
booting, working fine, confirmed call, data, sms, multi users... will put my mirror up tonight or tomorrow
Click to expand...
Click to collapse
NOT booting for me - I think its because i am on hboot 1.31 but anyway keep ist going
Great job. Thank you guys.
anja31:
Yes this is hboot related ( i will notify pabx to put this in the first post )
To everyone:
Please feel free to post bug reports ( if not already mentioned in the first post by pabx ) and in case of a crash a logcat would be great
This is really exciting, thanks guys.
Sent from my HTC One X using Tapatalk 2
Where do we find the Email app, for non-Gmail mail? I do see the Exchange apk, but no Email apk. Should we use the one from 4.1, or does 4.2 have a new mail client app? Thanks for the awesome work too by the way; so far this is actually impressively stable for a preview (known issues aside, and more testing to be done)!
Compiled the new Email app from source... I guess you can just push it to /system/app.
I have not been able to test it yet though, so i cant say if its 100% working
rogro82 said:
Compiled the new Email app from source... I guess you can just push it to /system/app.
I have not been able to test it yet though, so i cant say if its 100% working
Click to expand...
Click to collapse
This works (for pop3 at least).
M.
Sent from my HTC One X using xda premium
thank you!! i will try it once the camera works. :good:
First off, thanks for the rom - always great to try the newest version of android!
I found a bug with google now, it doesn't show me any cards relating to my location, it says that I need to turn on googles location services but they're already on.
rob9 said:
First off, thanks for the rom - always great to try the newest version of android!
I found a bug with google now, it doesn't show me any cards relating to my location, it says that I need to turn on googles location services but they're already on.
Click to expand...
Click to collapse
This is a known issue (see first post -> location services) and is already fixed in the git version.
We will probably release a new build that includes the fix today or tomorrow.
I have the feeling that the dpi is slightly off. On the lockscreen for example the widget area is bigger than the screen and The numberpad to enter the pin is cramped together. (I have no better way to explain it. Sorry)
Awesome guys keep on going will flash this one as soon as camera is fully functional as I really need it for work !!:good::good::good::good: