Please recommend me a good screen protector - General Accessories

Hi, guys, I am looking for a good screen protector for my SGH-i900 Omnia. My requirements are:
- doesn't dim the brightness of the screen (must have superb transperency)
- doesn't impede with the touch sensitivity
- when removed, it must not leave any residue on the screen
- must be non-corrosive to the screen
- must be bonded without any messy spray-type bonding sollutions
- should be anti-glare.
She screen protector should had been used/tested by you or your friends in order to be sure that the upper requirements are met.

This question has been asked over and over, but I'll be nice and throw a name out there in Steinheil.

I'd also recommend the Belkin ones, they have a matte finish to them, giving them a papery feel. I used one on my device (I actually just used one of my extra iPhone ones and cut it to fit) and loved it--as it made my finger scroll more smoothly with the finish. Just my 2 cents, not all protectors are built equally

I would recommend a ZAGG cover. I haven't used one on a touch screen device, but everything I have read says they work great on the iphone, so I will assume it's ok. I just ordered one for my new HTC Pure.
I have had ZAGG on my last 4 phones. They are custom fit, and you can get them to protect your entire phone, not just the screen. They are a little pricey, but trust me, they are worth it.
I have a samsung propel I use as my work cell phone, and the zagg protector on it is 2 years old! after 2 years, the screen is scratch free, and I have not replaces the ZAGG one time. I am an urban entomologist, and spend a lot of time under houses at work, this phone has lasted a long time.
go to zagg's website and look at their iphone scratch proof demo video.. You will see what I mean!
I will post further when I get my new cover in the mail and installed on my touch screen Pure.. Tell you how the touch screen acts with it on..

But I don't like ZAGG InvisibleShield, because when you are mounting it, you have to make your phone wet with some water-like substance.

I recommend you try to get rid of any possible air bubbles.
I just applied a screen protector to my HTC Ozone, and it has some air bubbles. Suffice it to say, it's pretty annoying.

You don't actually wet the device, just the screen cover before it goes on. Like I said earlier, I have had them on 4 other phones (now 5, my zagg came in.. YEA) and have never hurt my phone putting one on.
Follow the directions. Turn phone off, take out battery etc, before installing. It says to wait 24 hrs before turning the phone back on, I just wait about an hour then go on with using my phone.
When I got my pure, it came with a stick on screen protector. I have had the phone a month or so, and that protector was already worn out. I never tried the phones touch screen before installing the original screen protector, so don't know what sensitivity was like w/o, but with the zagg on, the screen is MUCH more responsive!
Anyways, my 2 cents...lol

Related

Electrostatic vs. Adhesive Screen Protectors

Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
I have no idea what is PET, or the different types. However, if you are talking about the one I got:
http://www.handhelditems.com/crystal-clear-screen-protector-p-135710.html
my experience is that this has great clarity, can get bubbles during applications, and they rarely come off by itself. On the many devices I've used this type of protector on, only one came off. It started in one corner, and over the course of a month with gradual lint build up the screen protector eventually got ruined. I could've washed it and reapplied for that month, but I had a spare so I was lazy. You can reapply the protectors as needed to get the application right. The bubbles that occur aren't the same as the rubbery kind. Air bubbles can easily be pushed out after application. The problem is dust that prevent the protector from adhering to screen, causing a little bubble. If the dust is really small, the bubble goes away over a day. Or, like me, you can live with it. You try getting something the size of an iPad dust free.
Bought Electrostatic - LOVE THESE!
Ok, as a preface I have owned and used screen protectors before.
I had an iPhone before the EVO and used the Griffin Ultraclear hard Protetctors ad the PowerSupportUSA products of every variety on my previous iPod products (iPod Mini 1G, 4G, Nano 1G, 5G, Shuffle 1G, Touch, iPhone) not to mention an invisible shield one or two. I gave up on the films towards the end of my Touch ownership. They always felt horrible and I could never get one absolutely perfect (didn't help that they usually were not perfectly cut).
For the Evo, I tried the InvisibleShield the first day because I remembered just how well the InvisibileShield had held up on my 5G. Well I think that they have changed the formula, or rather that 3M has since then because the smooth feel and smooth look of the original are most definitely gone. The new variety is rubbery (even after days of use) and is not cut well enough to be a perfect fit (it never covered edge to edge). So i skipped it. Well it seems that with this large of a glass screen, you are much more liable to getting scratches (versus using and unprotetcted iPhone/Touch screen) and I got a few ultra hairline ones that are barely if ever visible to the naked eye and just knowing that they are there bothered me. So I needed to think of getting a screen protector.
Seeing as how air moves and its nearly impossible to get a screen protectors on without any bit of dust, I decided on getting the electrostatic variety so that I could rinse if it came off or needed to be reapplied.
I bought These: Electrostatic Screen Protector - Clear Hard
- Hard variety (PET)
- Very Clear
- Silicone Layer (helps the scratches and dents heal themselves and give sturdiness to the PET)
- Electrostatic layer (holds the screen protector onto the phone)
Six pack delivered for $4? I could do much worse.
Well as it turns out, they are PERFECTLY cut and cover every inch of screen and no more. It went on smooth as butter and I got no bubbles or dust or fingerprints or anything (used a credit card to smooth it down). These were by far the easiest I have had. Not only that, but the electrostatic holds on just as strong as the sticky variety and will not get the gunk on the sides sticking to it! I have taken my TPU case on and off a bunch and had no lift whatsoever. As a bonus, THEY SHOW FINGERPRINTS MUCH LESS THAN THE GLASS SCREEN DOES!
So at $0.65 each, they are killer and having a few backups is nice as well as giving one to a friend.
Cheers!
Thanks for that post. I'm expecting my EVOs (I ordered 2) in within the next week. I've been trying hard to find cases and screen protectors without much luck, but I'm going to go ahead and order those screen protectors you mentioned since you recommend them.
Yep i ordered the same ones and love them. i have loved these from the start. they are quite easy to put on and stay on well.
Scotch tape is your friend in getting screen protectors on without a bit of dust
Childofthehorn said:
Hello All,
I know that I want a PET or other glass-like screen protector. Generally speaking, I never used screen protectors because they never really held up all that well and on top of that they never had the feel or look of the real thing. Now I have a scratch on my screen that is not normally visible, but I know its there.
I have run into a debacle because I know that while I am good at putting on screen protectors, I am no expert and the PET ones are harder to get perfect than the rubbery ones (which I now despise). So, recently I have seen that there are some PET/Silicone/ Electrostaic Hybrid screen protetctors and then there are still the PET with Adhesive.
Does anyone have experience with the electrostatic type and how good are they at staying on and bubbles?
Click to expand...
Click to collapse
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
OneStepAhead said:
I have a steinheil ultra crystal protector on my EVO, and its static. As long as you make sure there is no debris under it, it will stay on for a long time with no lifting. I have shown my phone to quite a few people, and not one of them can tell I have a screen protector on it. Even when I point it out to them, they still cant see it. It's very thin and I applied it perfectly so their a no bubbles. Took me about 30 minutes to get it perfect. If you use a piece of scotch tape to pick up debris under it, that works pretty good. This biggest thing is to make sure your edges are perfectly clean. Even the slightest bit of debris under one of the edges of the screen protector, and it wont be long before it starts peeling. I'm very satisfied with my steinheil. Going on 5 weeks now and it looks flawless. Id take a picture but you wouldnt be able to see it anyways. I thought it was a scam spending $13 on a screen protector! I used to order them from china for 50 cents. well, never doing that again! I've only ever used 1 adhesive type screen protector, and it was terrible. the clarity was awful.
Click to expand...
Click to collapse
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
xlrdxrevengex said:
Have not seen these yet. where did you get yours and do you know if they offer an anti-glare
Click to expand...
Click to collapse
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
remedy22 said:
Their anti-fingerprint screen protector is also anti-glare per the product description on their website.
http://www.sgpstore.com/product_info.php/cPath/23_33/products_id/1463
Click to expand...
Click to collapse
thanks for the link. Can anyone find this brand cheaper
xlrdxrevengex said:
thanks for the link. Can anyone find this brand cheaper
Click to expand...
Click to collapse
I don't think so.
But these are $13 well spent. Believe me.
~fb

I hate screen protectors!

I tried to use them, I really did. The first one was a zagg and it wasn't a very good experience. The screen was rubbery and got scratched up within 2 weeks. So I removed it and just left my seidio case on for a few months. No scratches at all. Now I just got an otterbox impact case and came w/ a nicer screen protector. I put it on, but the lint underneath the screen was driving me crazy. I tried cleaning it off and made it even worst! Is anyone else just rockin it with just a case? I'm done w/ screen protectors.
I used my phone for months without a screen protector until the OB Defender(waste) came out.
I do agree with you that the lint and dust is utterly frustrating. you almost need a clean-room with a surgeon to get the damn thing on right. I can't remember who suggested it, but they said if you take your phone into the bathroom after a good, hot shower, the moisture in the air will keep dust from floating around and you'll get a real clean protector.
i will tell you this, like i said, i rocked my phone for months without any protection. then one day i slid it into the same pocket as my car keys and received a nice long scratch along the length of the phone.
I use the otterbox one and I love it. You really can't tell that there is even a screen protector on the phone. You just gotta be very careful when you put it on. I have gotten really good at it, mine is perfect- not a bubble, spec of dust, scratch, etc...
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Wish I posted here first before applying the screen protector. I'll just have to baby it for now.
If you are going to use one of the ones made with the military grade polymer, bodyguardz is one of the better ones. It doesn't have the orange peel feel to it and they have a dry apply version.
I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.
spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
I started using them and love them. IMO one if not the best out.
You just have to take your time. You cant tell mine is on.. I have used the anti fingerprint anf liked it a lot, but im using clear now and love it.... I wont go to the wet apply again.
Sent from my PC36100 using Tapatalk
I hate the glass. I like the plasticy rubbery feel of zagg. My hand can slide and there's no smudges or prints on. Amaxing
A drop of Chuck Norris's semen was placed on the IPhone. We now have the Htc Evo.
Just FYI, I found a screen protector that I swear buy. It feels like glass, like the original screen. I dont know how scratch resistant it is but after a few months I'm still scratch free. Also I put one on my wifes phone. They come in a three pack off Amazon for $7 and some change shipped. It's worth giving a shot. Here's the link- http://www.amazon.com/gp/product/B003T1WI02/ref=oss_product
mob87 said:
I use steinheil too. The shower method is a little excessive tho. Just get a couple pieces of tape and dab around the whole screen to remove as much lint as you can, apply the protector and if there is still lint under use a strip of tape to life the protector and another piece to remove the lint.
Click to expand...
Click to collapse
That's pretty innovative! I'll remember the tape trick next time. Thanks
I like Zagg InvisibleShield on my EVO. I had to order a replacement since I messed mine up with attempting to put on the front of a DecalGirl skin (pain in the butt).
I know I would have a hard time doing it myself so I had Best Buy install the last one and probably do my replacement. Yeah, they charge $8 but both times on my EVO and on my father's new android upgrade were perfect. No air bubbles, no trapped dust, dirt, and grim under the screen protector.
Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.
jedwardmiller said:
Check my Signature for a great option for screen protectors. They used to only have one type, now you can get a whole lot of options. I love them! I used the shower method too, and it worked great for me. Still on my first one - 4 months and counting.
Click to expand...
Click to collapse
Are there scratches on ur screen protector? That's the other thing that drives me crazy.
I personally have to have a screen protector mainly due to my job . I work in the service department of a heavy equippment dealership . Besides being around dust and dirt and parts being ground down there is no telling what my fingers will pick up . I went with no protector at first and thats when I got my first two scratches . Had the invisible shield installed and scratches got covered up . Point of the story is , depending on your field of work and what you are exposing the phone to pretty much determines how well your screen is gonna remain scratch free . One thing that does irritate me to some extent . I had a Blackberry Storm that remained scratch free and never had a screen protector on it .
spankmaster said:
Screen protectors can be a pain in the ass, but with just a LITTLE bit of time, they can be awesome. First off, i use and swear by steinheil screen protectors. They feel exactly like the glass on the phone and not one person including myself has been able to tell the difference between an evo with it on and no screen protector. Second off, its the method of application that makes or breaks screen protectors. The single best way to apply one is in the bathroom. Turn on the shower and let the bathroom get foggy. This drops all the dusk in the air so you have a nice clean environment to work in. also use a good/new lint free cloth to clean while in the bathroom. use a little patience to get it lined up and start on the bottom and slowly move up using the included tool or a credit card. smooth out any remaining tiny bubbles and your in heaven my friend.
Click to expand...
Click to collapse
Going to give my vote to the Steinheil too. First off, I started out with a Zagg but could not stand the rubbery feel. In addition, I also use my EVO as a music player when I work out (I have an armband case that has a plastic cover on it) and every time I pulled the EVO out of the case after the workout, it would pull the Zagg cover off. PAIN IN THE *SS! I got so tired of it happening, the last time I just crumpled up the Zagg and tossed it in the trash. At that point, I was ready to go with a NAKED screen but had to remind myself that I was on my second EVO. The screen on my first got scratched 3 days after I brought it home (Don't even know how... with a 20-month old running around at home, could have been anything).
Now, going back to the Steinheil - I read reviews of it on Amazon and everyone raved. It was somewhat affordable so I thought, why not. After applying it, I have to say it's pretty awesome. Does it feel like glass? Not in my opinion - it feels "silky" but not SMOOTH like glass (does that make sense?) More importantly, it doesn't feel like rubber like the Zagg. And a fringe benefit, it does a great job of keeping off the fingerprints! And how about working out? I've used put in the armband case now 4X and it hasn't come off once. With the Zagg, I've had to reapply it 4 times!
So, my vote is for the Steinheil too... (BTW, they give you two in a case so you can try and find someone to split the costs with you if cost is an issue).
Boxwave screen protectors are the way to go. The crystal ones are awesome
Sent from my PC36100 using XDA App
I buy the cheap ones from China on ebay and they seem to work fine. I usually just buy them in bulk for like $10 and stash them. I replace them every couple of months once they get scratched. I swear by the shower method in the bathroom, always have a clean application.
I initially had a zagg screen protector but it was GARBAGE. I ripped it off after 2 days of having it. I ended up getting a privacy screen protector off eBay for $3.00 and have had it since. I do miss the crisp clarity of the Evo screen but it has proved useful and has worked much better than that zagg crap.
I got a Zagg as soon as I got my Evo. I had used them on other devices (G1, my brief stint with an iphone, my Moment). Some people don't like the orange peel effect, and say it feels tacky, but it doesn't bother me (I don't even notice the orange peel effect). I have had it since August of last year, since the Evo was so hard to come by for the longest time lol. I have no scratches, and no bubbles. No peeling of the sides, except one when I put my Seidio case on initially, but it smoothed back out. I had Best Buy install it for me this go around, and I couldn't be happier. I have had it like I said, since August, with heavy use, and it stays in my pocket. It still looks as good as the day I got it

[Q] Another screen protector question

So I got me 2 units of SGS2 this week, gonna surprise the hell of my dad
However, I'm too worried about its screen. I've read the post, it goes about 75% AGAINST (or just dont feel like using) screen protectors and 25% FOR screen protectors...
Now heres the thing. I got some chinese brand (like them all) protector, similiar to MUVIT (at belcompany). I also ordered from ebay a different brand (claimed to be as smooth as the screen itself).
I have only installed the first I got from belcompany (not invisibleshield, but shield"something"). It definitely reduces screen smoothes. Dry finger cant slide properly on the screen (dry - as in, washed with soup and completed dried by towel).
next week I'll recieve the ebay ones I've bought - but I'd ask this anyways ... What do we do about it? Should I apply the protector and reduce the screen feel or apply it?
Can we definitely say that the protectors help us overcome scratches, or can we trust Gorilla glass to do its job?
Thanks
After watching a few youtube videos (guy puts his keys and coins in a bag with
The phone and shakes the hell out of it) I feel safe to have the phone without a
Screen protector. Just the plastic on the back to worry about imo.
I've had lots of screen protectors for other phones, some don't show any
Scratches and some look like stained glass after one day. I can't be bothered to
Be changing it every week. I did cut out a little square from an old one to cover the
Camera lense tho, theres no way to know if thats gorilla glass.
Wow ... I loved your answer
so I guess I'll stick with the current cover until ebay shows up, and then see if its any good (and how much it reduces the orginial screen smoothness). If I dont like it, I'll just go commando.
Should find some for the camera lens, I agree.
Thank you for your answer.
The screen get scratches, i already have 3 of them, i don't know if it's the screen or the coating but i ordered a brando ultraclear SP for protection, i wouldn't afford another scratch

Xtreme Guard Screen Protectors - $1.99 ea

Pretty cheap, and if you need to replace one, you're not out much
http://www.ebay.com/itm/320803239584?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_2415wt_1373
Normally one of the first screen protectors on ebay after a phones release. Im not of fan of wet installation screen protectors. You get what you pay for. Mines barely lasted a week.
I've used those Invisible Shields for a LONG time. I'm a big fan, but not for touch screen devices. They're good for the sides and the back and such, but I don't care for them for the feeling they have when you try to slide your finger over the "glass." Strange. Regardless, if you DO like them, I'd highly recommend Zagg Invisible Shield. They're over priced but they've never let me down yet.
i don't get it guys? how is that the screen protectors fall off your phone? if you install it properly without any bubbles last even 1 year.unless gets too many scratch on it and i wanna put on a new one.never happend to me.and i always buy cheap ones.like 10 pieces for 3 pounds!
cheers!
Bad. Real bad stuff. They are kinda stuffy. Soft. More like thin layer of rubber. Can barely be used for touch screen, without having touchy fingers.
I bought them for my Samsung Focus and they aren't really good for the screen. For the sides and back, this case might be ordered.
vasishta.sushant said:
Bad. Real bad stuff. They are kinda stuffy. Soft. More like thin layer of rubber. Can barely be used for touch screen, without having touchy fingers.
I bought them for my Samsung Focus and they aren't really good for the screen. For the sides and back, this case might be ordered.
Click to expand...
Click to collapse
They have sold over 300 of them. I guess if they are as crappy as you say, I will say so in my feedback.
I bought one. Was actually just looking for a dry screen protector. Didn't realize it was similar to a zagg shield until I opened it up.
If you follow the directions it only takes a few minutes to apply.
I don't like the rubbery feel...but for 2 bucks it works. Just a side note...if you use the s pen you can see the markings on the screen protector. I'll be on the lookout for a cheap replacement because that is a little annoying.
^^^
Did I not tell ya That thing is good enough for everything but the screen.
I just got one partly due to prices, mainly per delivery time-fastest. I didn't know it was a wet installation and with the feedbacks i am apprehensive on using it. Any problems peeling it off the screen and did it leave unremovable streak marks for those that have used it?
No problems with the removal or leftout marks. At least give it a try.
There is no REAL issue with it, and if it's properly installed it will last a while. I don't use any additional cases and all the in-out action of my pocket usually takes off the screen protector, sides, or back within 2-3 weeks.
It has sold over 300 of them because they're so cheap. People will say "for two bucks, I'll give it a try" and even I was about to buy one until I realized that it's a zagg pretty much. Gimme a TPU / Hard shell case any day and those e-cell screen guards and I'm good.
any screen guard which dosent get scratched with s-pen?
Have one on my note, got ripped off cause I have bought it on the official website for five bucks. Personally, the rubber skin feels right, I have the same on all my other devices : touchpad, sgs 1, sgs 2, transformer, etc...
But with Note it is just impossible to make it last longer than a month with the s pen : I drew like 2 minutes and there already is several deep scratches in the rubber layer, very annoying and it messes the vision of the screen.
So for the note it's a no go imho, I'll invest in a dry protection I guess...
Sent from my GT-N7000 using XDA App
Just got mine today. They are thick and seem durable, but you simply cannot use the stylus on it effectively. That must be why they're $1.99
Yeah it is annoying the indentations caused by the stylus, but at least it is offering me protection while I wait for my long term solution to arrive by mail
I bought one of those $1.99 screen protectors for my note, had it on for 5 minutes then promptly ripped it off and threw it away. The S-pen leaves trails and I was hoping it would be clearer than the matte finish protector I received with the phone but it was just as fuzzy or rainbowish. Waiting on an Ultra Optic now and will accept it even if its not as clear as I want.

XtremeGuard screen protector

Hello,
I've got today my XtremeGuard screen protectors and I've got a question...
The appliation of the protectors are wet-apply and it requires to take-off battery or either wait for a long time when its off.
Since I dont have 24 hours , was wondering if it would be fine applying the protector 2 hours before going to sleep, letting it be applied for about 10 hours total and then turn the phone on again..
Did anyone apply such a protector to the HTC One already?
Just saw a 85% off coupon for this screen protector, so I got the full body kit for only $1.50 with free shipping
Curious to see how well it works. Does the protector feel good or is sticky-ish feeling? In regards to your question, you'll be fine.
opher50 said:
Hello,
I've got today my XtremeGuard screen protectors and I've got a question...
The appliation of the protectors are wet-apply and it requires to take-off battery or either wait for a long time when its off.
Since I dont have 24 hours , was wondering if it would be fine applying the protector 2 hours before going to sleep, letting it be applied for about 10 hours total and then turn the phone on again..
Did anyone apply such a protector to the HTC One already?
Click to expand...
Click to collapse
I'd take the instructions with a grain of salt, so to speak.. mine I did turn off for the duration of the operation, a good 5 mins, then turned it back on, no problem. However, try to not abuse the liquid and in any case wipe it dry allover.
Sent from a pizza..
I had used a xtremeguard on a Butterfly, also wet applying. However I hated the protector because the film was very sticky.... The film I use on my One is from nillkin, I think it's just a common cheap protector, and feels much more natural.
I applied one of these protectors and love it. I used some tape to cover the speaker holes during the installation and was careful with the amount of the water and soap solution used to apply it. Kept my phone off for a few minutes, dried it off then removed the tape. It was extremely easy and I had zero issues. Purchased a few of these with the 85% off discount and am extremely satisfied. Much better than Zagg or taking it to a Ghost Armor cart which is such a rip off! Follow the instructions, use some tape and you will be just fine.
I've installed 2 of these, one on my one and another on my galaxy nexus. Both i used within 3 minutes of installing the protector without problems. It will seam a little sticky at first but it goes away after a while.
I have installed literally dozens of XtremeGuards or other wet application protectors, and i dont even turn my phone off anymore. if you dont get any water in the speaker grills you will b fine.
Does your xtremeguard protector fits the whole screen? i received one that is smaller than the One screen.
I just installed an XtremeGuard on my HTC One which I picked up as a temporary protection during the sale.
I do not know how people can standing using these things on their phone.. it feels like you're trying to slide your finger along the sticky side of scotch tape.
I used a DBA just like glass screen protector on my previous phone and I now have a new appreciation of how smooth it was.
I've ordered a glass screen protector (my first ever, so I hope I don't mess up the application) which will arrive in a week or two.

Categories

Resources