Develop Bugs

BA - SX66 Variant won't load - stuck in Splash or Bootloader

Got a little problem, maybe big =(
Basically the phone one day decided not to work
i can get only two screens
either the start-up splash screen displaying CINGLAR and the firmware stuff on the bottom corner
or
if i enter bootloader mode, i get SERIAL 2.07 and nothing else
i have tried hard reset, take out the battery for ever, even flash
hard reset does nothing, soft does nothing
take out the battery does nothing
the phone won't charge through the cradle or charger, i can only charge the battery alone using the cradle
as for flashing it won't flash in the cingular splash screen or the bootloader screen, it doesn't change from SERIAL to USB when connected, thus the computer can't send anything to it
what can i do ?????

Do you have an SDIO card in the top slot? That can cause problems with the bootloader accepting the image from the PC.

nope only have the original DEMO SD plastic

any one what could be wrong ?

had same problem
dont know if you are doing the wm5.0 hard reset or teh old style hard reset that we used to on wm2003se. its teh notes button, camera, power and soft reset button. clear registry and the storage and then it should work. it did for me.

tried your reset steps boots the bootloader =(

Re: BA - SX66 Variant won't load - stuck in Splash or Bootlo
evilgabbie said:
if i enter bootloader mode, i get SERIAL 2.07 and nothing else
...
what can i do ?????
Click to expand...
Click to collapse
BigDamHero said:
If you got bootloader mode then you should be able to upgrade your rom to whatever you like.
Step by step insturctions are on WIKKI. The page for upgrading to the most recent ROM for the Blue Angel that IS NOT WM2005 is here:
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
If your device is in bootloader mode just put it in the cradle (activsync won't start but don't worry about that) and start the upgrade!
Click to expand...
Click to collapse
When you get to the Bootloader screen, probably you are home free. Just use the abouve link to resolve you problem.

BootLoader Loop Issue - SX66 Siemens
I am having a similar issue , where i am unable to hard reset or soft reset ,If I place SX66 (SIEMENS) in cradle it appears to charge after charge is complete , it will go to bootloader menu.
==========================================================
I have downloaded the MTTY , and would to know the settings required for USB , is selected from dropdown what is the optimal choice to make.
Im not seeing the cmd line " CMD> " in using MTTY.
I was gonna use com ports but dont know the settings to set:
==========================================================
parity
data bits
stop bits
flow control
local echo

http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
had exactly the same problem, follow these steps for hard reset
my phone came good after (running wm6)

Trying to Upgrade ( Flash ) and now I am stuck in Bootloader

I tried the Upgrade, but it did never start, so when I tried to get it back to normal, doing a reset, I only get the Bootloader screen, with the USB and v0.60, I tried a Soft and Hard Reset but nonthing, I have tired to re-flash it again, but also nothing, please any help, thanks

I can not even to start the Flash program, I get ERROR : 101
ERROR 101 : CONNECTION ERROR
PLEASE ANY ADVICE IS WELCOME, THANKS

I WAS ABLE TO REFLASH IT, BUT I STILL GET TO BOOTLOADER ONLY
PLEASE HELP

latest ActiveSync installed? Removed battery?

Had this issue Yesterday. Even if You update the ROM, You will still stay in bootloader (for me it was like this). Do another update, this time only the radio (so delete ms_.nbf and nk.nbf from the directory from where You run your upgrade utility). After this (another 20 minutes) You should be able to have result after the cold-reset.
On the bootloader there is a small difference. Upgrading the ROM shows how far he actually is (in percentage), whilst upgrading Radio it does not show You the percentage, only that he is busy.
Ruud

Just try the update without any insert card (sd and sim), and a wonder will happen!
Teja

- connect the JASJAR with your PC using the USB cable. Activesync will NOT start and the XP says does recognize it
- do a HardReset (press the 2 (-) in the keyboard and softrest it all at the same time. Hardreset screen appears (DON'T press 0 or X..)
- start the update program. Please use a good upgrade like the latest from imate ftp://ftp.clubimate.com/JASJAR_WWE_11353_137_10301.zip
- start the update and when it's looking to check the version of the JASJAR softreset it
It should start to reflash it without problems.
I hope it helps...

USB-connector not working – how can I flash Stock-SPL ??

The Mini-USB-Connector on my XDA-Diamond isn’t working anymore. Windows recognizes my Diamond as “unknown device”...
So I have to ship my device to "O2-Germany" (repair service) and I think, I should remove Hard-SPL before ...
Normal flashing is no Problem for me, using the following “workaround”:
1. Rename your Image to DIAMIMG.NBH
2. Copy DIAMIMG.NBH to Internal Storage root (I can do this via Bluetooth)
3. Put Diamond to "USB Trigger Mode" throught holding VolDown+Back while pressing reset
- After a few seconds Diamond will ask you to flash DIAMIMG.NBH
4. Press PowerButton to start flashing
Now I tried to remove Hard-SPL by performing the following steps (using the workaround above):
1. flash original ROM (O2-Germany v.1.93)
2. flash Stock-SPL (SPL v.1.37)
3. flash original ROM (O2-Germany v.1.93) again
Flashing seemed to be successful, but when I go to “Bootloade-mode” it still displays something like “SPL 1.4 Olinex”
What did I do wrong? Can anybody help please??

joma1967 said:
The Mini-USB-Connector on my XDA-Diamond isn’t working anymore. Windows recognizes my Diamond as “unknown device”...
So I have to ship my device to "O2-Germany" (repair service) and I think, I should remove Hard-SPL before ...
Normal flashing is no Problem for me, using the following “workaround”:
1. Rename your Image to DIAMIMG.NBH
2. Copy DIAMIMG.NBH to Internal Storage root (I can do this via Bluetooth)
3. Put Diamond to "USB Trigger Mode" throught holding VolDown+Back while pressing reset
- After a few seconds Diamond will ask you to flash DIAMIMG.NBH
4. Press PowerButton to start flashing
Now I tried to remove Hard-SPL by performing the following steps (using the workaround above):
1. flash original ROM (O2-Germany v.1.93)
2. flash Stock-SPL (SPL v.1.37)
3. flash original ROM (O2-Germany v.1.93) again
Flashing seemed to be successful, but when I go to “Bootloade-mode” it still displays “SPL 1.4 Olinex”
What did I do wrong? Can anybody help please??
Click to expand...
Click to collapse
I just got my diamond back from the repair at the danish provider 3, I simply stated when i turned the phone in, that i allready had tried to flash it , and it didnt solve my problem (which was the same as yours, they are going to replace the print in your phone so make sure to backup everything on the internal as well as on the phone). Just make sure the write it on the repair note, and everything will be allright.
My phone went to repair with bePe 0.96.

joma1967 said:
The Mini-USB-Connector on my XDA-Diamond isn’t working anymore. Windows recognizes my Diamond as “unknown device”...
Click to expand...
Click to collapse
Did you tried to connect you Diamond to antoher PC?
If not, try to remove Active Sync(also manually delete the Active Sync directory in the folder "c:\program files\microsoft activesync" en reinstall it.
You can also try to go manually into the bootloader(pres and hold volume down + reset button and release the volume down button when you seee the tri-colored screen). When you connect to the PC there should be USB on the display on the phone(instead of serial).
Maybe it's just your pc instead of your TD

I'm sure it's the mini-USB connector and not the PC that is not working properly.
I have another Diamond tried on my PC. The other device is working well.
Activesync I have also completely deinstalled and then reinstalled (with manual deleting before).
Even in bootloader mode, the diamond can not be accessed from the PC.

Hello all i have the same problem my usb does not working and it's my diamond not my pc. Im sorry for my bad english im french i have tried to change all the rom but no change my usb not work.

Same problem here, USB-Connector is broken. It all started with a loose connection. Back then i thought that it is my PC that is not working properly, because charging still works - even now it does.
Nonetheless the USB-Connector in the phone is dead for any type of data transfer, so i need to get the Diamond into its state of delivery to get warranty service. That means restoring stock rom , stock spl (which causes the main problem), and stock radio.
As the originial ROMs from O2 Germany contain their stock radio, these 2 problems should solve pretty fast - before or after restoring stock spl.
I thought of the .nbh-File containing the stock spl renaming to diamimg.nbh and push it to internal storage via WLAN-Connection and flash, as i usually do with roms - but i don't have a clue if this might work and i am afraid of bricking the device by doing so.
If anybody has an idea how to safely get stock spl back on the phone WITHOUT USB-Connection, that would be great.

have you ever tried to hard reset your diamond in steed of flashing it!!!!!!
so you can try to flash it then hard reset (after flashing)
uninstall your active sync or windows mobile device center
do not install your's
download the latest version of active sync(4.5) or wm device center
then connect your phone i tihnk it will work
i had the same problem and i did this steps
now it works good
hope this help you

Eten x610

Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me

hi there
try thees Steps
1. Run the ROM update program on your PC and go through the installation process until your reach the ‘End User Update‘ window. Leave this running.
2. Go to the Temp file in your Documents. This is usually C:\Documents and Settings\username\Local Settings\Temp but it really depends on how you set up Windows.
3. Look for these 2 files, temp.dat (about 60 MB) and USBDLUpdate_Console.exe (about 4 KB) and copy them to your formatted SD Card using a card reader. You might want to copy these files to another location on your PC before copying it to your card reader if there are problems. Also, rename temp.dat to temp.bin before proceeding to the next step.
4. Put this card into your device and put the device into Bootloader mode. This can be done by pressing (and holding) the power button and voice commander key and then soft resetting. When it restarts, you can remove the stylus but keep your hold on the power and voice commander buttons.
5. The installation will proceed but at a slower rate than if you did it on your PC. This is due to the slower transfer rate between the card and device. It might take about 15-30 minutes so it would be best if your device was connected to the mains charger.
6. Installation is complete when you see this message “USB host is not connected yet“. This is your sign to do a soft reset and setup your device as the ROM installation was successful.
***
you may use this rom
http://rapidshare.com/files/314654442/Eten_X610_WWE.7z
just rename temp.dat to temp.bin put in formatted sd card
and go threw steps 4 to 6
any how you are welcome to
http://www.eten-users.eu/index.php?showforum=52

Hello,
I Tried All Ways & Your Roms On Etenusers
But My Boot Loader Shows a White Screen After Using Magic Numbers Method!
What Can I Do?
My Device Is x610 Samir 020 0702
One An Other That: My Booting With All The Roms That I Tested With Memory Card Method Long Only 4-5 Minutes! Isn't It Wrong?

Aha i got it now
Ok i got it now
I understand your problem
you cant do any thing for your device unless you have another Glofiish device (any model)
because your flasher is corrupted
if you find any working Glofiish device (any model) this is how to do it
1- connect the working device to Active Sync
2- download this tool http://rapidshare.com/files/254487467/UnLock_upgrade.rar
3- put one of my roms in the same folder of the tool.
4- open the upgrade.bat
5- flow the installation steps until the device goes to bootloader
6- now disconnect the working device from usb
7- put your device in boot loader mode connect your device to pc
8- push the update button .
and you are done
any how send me your mobile number as PM and i will call you as long as you are
in ksa

Oh A Big Problem!!!!
I'm In Iran & I Think There Are max 10 Glofiish Device In Iran!!!
Some Time My Boot Loader Work But Only With Sd Card
Isn't Any Other Solution?

I have another problem with x610. After hard reseting the phone after I pressed yes on deleting the files, I got myself callibrating the phone but the callibration stucks forever and it does not passes so the phone wont start...
Is there any solution? Please help as after searching I found nothing as a solution so I am asking here.
can I boot somehow from sd card? I mean formatting the phone?

nephew said:
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
Click to expand...
Click to collapse
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..

probir_dev said:
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
Click to expand...
Click to collapse
Hi,
I tried as you said above, when I click YES it showed as bellow
"erase all data and load default ? (Yes)
please wait... "
and nothing had happened and it was showing like that continuously..
What should I do to get back my device?
please help me to sort out this.
thanks in advance..

to stupid to read - need help

Hi!
What I have done:
-got a rom which fits to my needs
-downloaded it, renamed it to DIAMIMG.NBH, transfered it to my internal storage
-put the phone into bootloader mode, used MTTY all went well
-boot again... freeze
-initialising rom .... freeze
-trying custom_ruu.exe .. freezes at 0%
-hard reset.. fine, boot.. freeze
-finding the thread about MTYY reading that I should have Hard SPL.. swearing a lot
Is there any possibility to get my phone running again? As far as I have found no info how to install anything without a running sync connection, but without any system on the phone I dont know how to establish any connection other to the bootloader mode

Because you haven't upgraded HardSPL before flashing new custom rom - I think you did brick your phone.

Hello, prl3st
I have solition if you use htc touch diamond ( diam 100 ) but if you did not model HTC Diamond, can go try it.
A possible solution could be:
- Obtain a functional ROM (file that RUU_signed.nbh) interface CustomRUU.exe
- Connect the phone cable to the PC
- CustomRUU.exe starts and pass the first two screens where you wondered if you connected the device and that he give the order to enter in flash mode
- On smartphone: press volume down and reset simultaneously to get in the boot mode. Once you made that follows the instructions on screen.
Possibly if it fails the first step to obtain a version of HardSPL Diamond, copy the file there. Nbh and running ROMUpdateUtility.exe phone connected to PC and a loader.
It should work. Good luck and more attention next time.

yep worked fine with the original ROM from HTC!
Thanks to XDA developers and big thanks also to awran5 who gave me some privat support =D