Hi all after testing for about a day i have found a way to get rogers name display to work on the tilt 2. Just had done a lot a searching and combined 2 cabs to get this working.
I have tested this only on the Energy rom and nothing else.
1st you need to install: rilphone for rogers CNAP.cab
then soft reset
2nd you need to install: NRGZ28 Tachi Dialer Disabler.cab
Yes i know you are all saying disabler for tachi but so far this is the only way it will work until someone can implement the settings for stock wm dialer to tachi.
Please Stick this
I tried it on my tilt2 with the cell pro rom it is making my phone run hot and draining the battery fast 10% in about 10 minutes. But it is also making my phone run alot smoother. Uninstalled with no luck still running hot and draining the battery fast. also "attention required" message flashes when I reboot. Time for a hard reset.
Assassin5150 said:
I tried it on my tilt2 with the cell pro rom it is making my phone run hot and draining the battery fast 10% in about 10 minutes. But it is also making my phone run alot smoother. Uninstalled with no luck still running hot and draining the battery fast. also "attention required" message flashes when I reboot. Time for a hard reset.
Click to expand...
Click to collapse
yes i agree i dont think that would be a problem with the rilphone.dll sounds like the phone is using either the data or phone itself all the time i would say try a hard reset and try this again. if it does the same thing again try a different rom. Im using energy rom i have always had good luck with his roms.
Thank you for those great cabs. Will be going back to canada in 2 weeks and will give it a try and report back.
I am using Mighty Mike's rom, do you think it will work?
regular phones with rogers/Fido don't need data. Using this cab, will I have to use data?
bteljuice said:
Thank you for those great cabs. Will be going back to canada in 2 weeks and will give it a try and report back.
I am using Mighty Mike's rom, do you think it will work?
regular phones with rogers/Fido don't need data. Using this cab, will I have to use data?
Click to expand...
Click to collapse
pretty sure it will work with any rom just try the rilphone.dll first and if it still don't work then install tachi dis-abler and should work. This will only work on GSM models not cdma/gsm so make sure yours is just gsm. And as for data the answer is no it doesn't use any data at all just like a regular rogers/Fido phone.
Thanks Hiwired.
Is there a way to make it work on CDMA
I linked this thread on ppcgeeks, maybe someone could collaborate with your work to see if they can make it work for us WCDMA users. I hope you don't mind.
http://forum.ppcgeeks.com/showthread.php?p=1851465#post1851465
nope i dont mind at all. and as it sits so far right now it will only work on gsm rogers. if you are looking for cdma then right now might look at program called truecallerid but you have to have 3g on in order for you to see it when the call comes in. it does use data as well to. im switchin carriers this week goin to bell so im going to try to mess with this on thier cdma/gsm 3g network
hiwiredjuice said:
nope i dont mind at all. and as it sits so far right now it will only work on gsm rogers. if you are looking for cdma then right now might look at program called truecallerid but you have to have 3g on in order for you to see it when the call comes in. it does use data as well to. im switchin carriers this week goin to bell so im going to try to mess with this on thier cdma/gsm 3g network
Click to expand...
Click to collapse
thx man, appreciate it.
any reason why you switching? work reason?
i dont have 3g but planing to get soon
So I see you switched to Bell. Any update for us CDMA people?
bteljuice said:
So I see you switched to Bell. Any update for us CDMA people?
Click to expand...
Click to collapse
nope it does not work on bell the only thing that is somewhat working is truecaller but that don't work on all numbers
hiwiredjuice said:
nope it does not work on bell the only thing that is somewhat working is truecaller but that don't work on all numbers
Click to expand...
Click to collapse
mmm...
Thought WTH, let me try it on my phone CDMA. didn't work
I wish there's a work around for CDMA because I am using it on FIDO
ya as it sits right now bell only has caller number display BUT since they went with the 3g gsm network we might see something come out soon for it they have the proper network now just need the coding
A little off topic hiwiredjuice , but what radio are you using with this fix and the energy rom? I'm on the rogers network and I want to find an optimal radio to use. I am using Energy Rom, and i plan on using this fix aswell.
Related
my evo when I flash custom roms will always give me 1x instead of 3g icon... not sure why is there a fix of any kind?
Your probably not clearing everything when you flash the rom. Make sure you wipe everything when flashing a new rom.
Sent from my PC36100 using XDA App
I wipe everything 3 times before flash thanks for the advice
jph1282 said:
I wipe everything 3 times before flash thanks for the advice
Click to expand...
Click to collapse
Try going into espt. (you need to be on a sense rom) Enter ##3282#. Go to edit mode (you'll need your MSL number). Select 'evdo', and make sure that the preferred mode is set to automatic. I don't remember if it automatically reboots your phone when you commit the changes, but if not, then reboot it manually after you change it. That may help ya out.
k2buckley said:
Try going into espt. (you need to be on a sense rom) Enter ##3282#. Go to edit mode (you'll need your MSL number). Select 'evdo', and make sure that the preferred mode is set to automatic. I don't remember if it automatically reboots your phone when you commit the changes, but if not, then reboot it manually after you change it. That may help ya out.
Click to expand...
Click to collapse
Good call, only reason I didn't think this was the reason because most roms don't have the icon change when you lose evdo.
Sent from my PC36100 using XDA App
dcmasta said:
Good call, only reason I didn't think this was the reason because most roms don't have the icon change when you lose evdo.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Right, but now that a lot of the Sense roms are incorporating that mod (the mod that shows if your truly on 3g or 1xx), some people are realizing that they aren't getting 3g signal at all. Some may have been on 1x the entire time, but then when they switch to a rom that shows what you're actually connected to, they realtize they're on 1x. That trick works for some people, but not all. I think it'll help out though.
Same 1x problem no matter what i do
Ive had this problem for about 5 months now and it doesnt matter what ROM i switch to or use it the same and going in EPST doesnt fix the problem neither when doing what you just said to do with the epst but when i do change it from AUTOMATIC to HRC it goes back on 3G but the downfall to that is that phone calls and text dont come in to your phone until you make a phone call so can anyone help solve the issue why is this happening? I have a white evo hardwhere 0003 used all kind of roms even stock and same thing and know alot about phones and been messing with them since windows mobile 6.1 HTC TOUCH for sprint soo... And my girls evo is and stays on 3GrevA. her in not rooted and is stock tho while mines is stuck eternally 1xrtt.
swurvv said:
Ive had this problem for about 5 months now and it doesnt matter what ROM i switch to or use it the same and going in EPST doesnt fix the problem neither when doing what you just said to do with the epst but when i do change it from AUTOMATIC to HRC it goes back on 3G but the downfall to that is that phone calls and text dont come in to your phone until you make a phone call so can anyone help solve the issue why is this happening? I have a white evo hardwhere 0003 used all kind of roms even stock and same thing and know alot about phones and been messing with them since windows mobile 6.1 HTC TOUCH for sprint soo... And my girls evo is and stays on 3GrevA. her in not rooted and is stock tho while mines is stuck eternally 1xrtt.
Click to expand...
Click to collapse
you may have facked your radio at some point? I would tinker with different ones till you get the sweet spot.
k2buckley said:
Right, but now that a lot of the Sense roms are incorporating that mod (the mod that shows if your truly on 3g or 1xx), some people are realizing that they aren't getting 3g signal at all. Some may have been on 1x the entire time, but then when they switch to a rom that shows what you're actually connected to, they realtize they're on 1x. That trick works for some people, but not all. I think it'll help out though.
Click to expand...
Click to collapse
This. There may not be anything really wrong at all. I mean, it sucks to drop to 1X, but the stock ROM was lying to you.
Now, if you ONLY see 1X all the time, yeah, that's a problem. But an occasional switch over to 1X (particularly if you're in a tough signal area, like the core of an office building) is normal.
I am on mikG Rom I have had 3g before I updated radios got the new stock rom but at home I use a airwave for signal wonder if that messes anything up?
Sent from my PC36100 using XDA App
jph1282 said:
I am on mikG Rom I have had 3g before I updated radios got the new stock rom but at home I use a airwave for signal wonder if that messes anything up?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Have you tried one of the new Sense 3 roms? The reason I ask...when you go into 'ABOUT PHONE' in settings these versions give you a network option that others do not. Check to see what it is telling you are receiving 1X or evdo. If it says 1X...you may have the same issue I had...borked 3G. Once I got it replaced..I loaded up the 3.0 again just to check what it now said..and you betcha...evdo was now showing and not 1Xrxx (or whatever it was).
I tried everything as well for about three weeks..you name it..ROMS/RADIOS/STOCK/CUSTOM/ESPT even took it back to fully stock and then rooted again (lost my .76Hboot in doing so, but phone didn't work right anyway... I was grabbing for straws. Luckily it was just under the first year and paid the 35 to have it replaced (no warranty plan). I travel and no matter where I went the speeds were terrible..ya..the 1X/3G/EVDO in the notifications bar is just for looks...but you KNOW when your stuck on 1X...frustrating.
This may not be the case....but
kinda of a simple fix... first of all stock sense roms always show 3g even if you dont have it... if on every rom you flash you keep getting the 1x AND you alreeady tried radios, nv etc upgrades and those dont work, then it is your PRL not PRI... 2 different things... to fix it check out a thread under deveopement ..Deck.... cause there is a fix there, or google prl and pri update evo on google.. you will need msl and be on sense and be able to use espt
First of all, I apologyze for my english, just want you to sit and read carefully..
I'm from Panama, and I just bought a HTC Incredible 2 from Verizon Wireless on eBay, it came unlocked for any gsm network.
I used it for a couple month on Movistar with a GSM chip, it wasn't able to conect on 3G network, only 2g but it's enough for me, beacuse I use WiFi conection everyday.
Today I decided to install a custom rom, I had some trouble installing the roms because I don't know much about that, It is already rooted by revolution tools
I tried miui once and cyanogenmod 7 Nightly, Kernel v2.6.35.14 its the current rom I'm using, but the phone it's unable to conecto or even find a GSM network!!!
It's on Global Mode (that's the option I always used before) and Data capability On, now I can't do anything without network!
I have typed *#*#4636#*#* and did the steps I found on another thread and nothing worked!
I really need your help! I read something about the 'RADIO', I'm not sure about that.
You need to find the apn settings for your provider and enter it in at your mobile settings. Not sure who your provider is so i dont know your apn settings, try google.
jics91, some ROM's don't support both gsm and cdma which is what Verizon wireless uses. One ROM that supports gsm and cdma is SkyRaider Zeus 1.3. You may want to give that a shot. Google it. It's a popular ROM that is very stable and it includes GSM.
You should be setting GSM / UMTS Mode in your settings. If you are able to make calls and just can't get data then you need to set your APN. Are you using Movistar? If so, Movistar uses the following information.
APN: internet.movistar.pa
Username: movistarpa
Password:moveistarpa
APN Type: default
The rest of the options leave default.
mthornto88 said:
jics91, some ROM's don't support both gsm and cdma which is what Verizon wireless uses. One ROM that supports gsm and cdma is SkyRaider Zeus 1.3. You may want to give that a shot. Google it. It's a popular ROM that is very stable and it includes GSM.
You should be setting GSM / UMTS Mode in your settings. If you are able to make calls and just can't get data then you need to set your APN. Are you using Movistar? If so, Movistar uses the following information.
APN: internet.movistar.pa
Username: movistarpa
Password:moveistarpa
APN Type: default
The rest of the options leave default.
Click to expand...
Click to collapse
I really really apreciate your help with this topic, once I tried CyanogenMod 7 and it does work on gsm so Ive got my phone conected!
I'll try SkyRaider Zeus 1.3, gonna take a look
One more thing, what are kernels and radios for?
jics91 said:
I really really apreciate your help with this topic, once I tried CyanogenMod 7 and it does work on gsm so Ive got my phone conected!
I'll try SkyRaider Zeus 1.3, gonna take a look
One more thing, what are kernels and radios for?
Click to expand...
Click to collapse
Cool. I am glad you got it to work. I am replying to you using movistar. Just landed in David, Chiriqui yesterday. Radios and kernels are for better battery life and signal. You probably don't need a better radio. But you should try a different kernel than the stock one. You will get better battery life and can have more control over it. But be careful, some kernels don't work well with certain roms. So do some research before loading it.
Sent from my ADR6350 using XDA App
mthornto88 said:
Cool. I am glad you got it to work. I am replying to you using movistar. Just landed in David, Chiriqui yesterday. Radios and kernels are for better battery life and signal. You probably don't need a better radio. But you should try a different kernel than the stock one. You will get better battery life and can have more control over it. But be careful, some kernels don't work well with certain roms. So do some research before loading it.
Sent from my ADR6350 using XDA App
Click to expand...
Click to collapse
so, I'm acttualy using the SkyRaider Rom, it works just fine so far! I'd like to try a kernel, the battery drain is not regular at all, when I unplug the phone, it goes from 100 to 98 or 95!
jics91 said:
so, I'm acttualy using the SkyRaider Rom, it works just fine so far! I'd like to try a kernel, the battery drain is not regular at all, when I unplug the phone, it goes from 100 to 98 or 95!
Click to expand...
Click to collapse
That's normal.
Sent from my Mikrunny'd Superphone using Magic (TapaTalk)
Yeah it is. I am using #22. I think that's the most popular the last time I checked.
Sent from my ADR6350 using XDA App
you can close this thread! I have installed SkyRaider Zeus and everything just works fine!
thanks a lot!
jics91 said:
First of all, I apologyze for my english, just want you to sit and read carefully..
I'm from Panama, and I just bought a HTC Incredible 2 from Verizon Wireless on eBay, it came unlocked for any gsm network.
I used it for a couple month on Movistar with a GSM chip, it wasn't able to conect on 3G network, only 2g but it's enough for me, beacuse I use WiFi conection everyday.
Today I decided to install a custom rom, I had some trouble installing the roms because I don't know much about that, It is already rooted by revolution tools
I tried miui once and cyanogenmod 7 Nightly, Kernel v2.6.35.14 its the current rom I'm using, but the phone it's unable to conecto or even find a GSM network!!!
It's on Global Mode (that's the option I always used before) and Data capability On, now I can't do anything without network!
I have typed *#*#4636#*#* and did the steps I found on another thread and nothing worked!
I really need your help! I read something about the 'RADIO', I'm not sure about that.
Click to expand...
Click to collapse
Hello,
Please let me know if your able to use GSM sim now? i too installed SkyRaider Zeus and have same issue with my HTC Driod Incredible 2.
You guys need to check out my cm9/cm10 threads I've accomplish working global roms
Sent from my Incredible 2 using xda app-developers app
So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?
partyk1d24 said:
So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?
Click to expand...
Click to collapse
Bump: And also I tried to set an old APN but that didn't help.
Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.
tomtommy306 said:
Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.
Click to expand...
Click to collapse
I have not rooted or anything, I have tried some APNs but I was hoping other people might help me out with something else to try. I don't really buy the whole " if you are stock... there is nothing that can be done" What if I was trying to get help with a stock developer build of my n1 (which I have previously) or are you asserting that without rooting I will not be able to fiddle with the modem settings?
What I'm saying is the phone comes ready out of the box. Unless you have changed something then it is a network problem. You will have to take it up with AT&T.
U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1
JB calhoun said:
U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1
Click to expand...
Click to collapse
Thank you guys for trying to help but I know all this. I am just in the period of time I can take it back and I don't want to risk that by bricking it while monkeying around.
I (Maybe) have isolated the problem, they said that I was set up for LTE and there are some issues with proper propagation of properties. Anyway problem "May" only effect people on ATT with Samsung S3s bought at BestBuy locations and the upgrade includes unlimited data. Still working will update tonight....
BUMP!
'm gonna try and make a long story short. Yesterday I purchased A S3 from ATT..Everything was working fine right out of the box no problems, lte and everything..Well earlier today I rooted my phone and everything seemed to be fine, I even flashed a rom and that seemed to be running fine also, but I noticed when I flashed the rom on the tool bar where it shows what data your running other than Wifi, it said H, don't know what that would be but I know it wasen't lte....So I thought maybe something was wrong with my phone, so I took it to the att store and showed them I wasen't getting 4glte..So they looked on the compyter and everything looked right, then they took it to the back where the service center was and flashed it back to factory....AND WHAT DO YOU KNOW??? It worked...I got 4glte right away..It said it right on the toolbar..I was so happy its working again like it should be...So I get home and root the phone again..everything went fine with the root, well it seemed like it BUT WHAT DO YOU KNOW...YOU GUESSED IT..NO 4gLTE...WHAT is going on here...and this was just off a fresh root no roms or anything...So I'm stuck I don't know what to do or if anyone else has expierienced this or knows a fix...I really want to keep my phone rooted so I can run roms and programs like Titanium Backup
So if anyone knows and can help I'd really appriciate it...thanks for your help and time...
I'm keeping my fingers crossed
As you can see from the picture you can see 4g on the status bar, but check out the speeds...and I'm in a great spot for lte..so something is wrong
Its kind of normal that lte dont work on some roms, you could just stay stock and it will all work, Im not sure why root would kill your lte, how are you rooting?
shadyraver said:
'm gonna try and make a long story short. Yesterday I purchased A S3 from ATT..Everything was working fine right out of the box no problems, lte and everything..Well earlier today I rooted my phone and everything seemed to be fine, I even flashed a rom and that seemed to be running fine also, but I noticed when I flashed the rom on the tool bar where it shows what data your running other than Wifi, it said H, don't know what that would be but I know it wasen't lte....So I thought maybe something was wrong with my phone, so I took it to the att store and showed them I wasen't getting 4glte..So they looked on the compyter and everything looked right, then they took it to the back where the service center was and flashed it back to factory....AND WHAT DO YOU KNOW??? It worked...I got 4glte right away..It said it right on the toolbar..I was so happy its working again like it should be...So I get home and root the phone again..everything went fine with the root, well it seemed like it BUT WHAT DO YOU KNOW...YOU GUESSED IT..NO 4gLTE...WHAT is going on here...and this was just off a fresh root no roms or anything...So I'm stuck I don't know what to do or if anyone else has expierienced this or knows a fix...I really want to keep my phone rooted so I can run roms and programs like Titanium Backup
So if anyone knows and can help I'd really appriciate it...thanks for your help and time...
I'm keeping my fingers crossed
As you can see from the picture you can see 4g on the status bar, but check out the speeds...and I'm in a great spot for lte..so something is wrong
Click to expand...
Click to collapse
1st wrong thread, this has nothing to do with development, 2nd if ur getting 4g lte issues then speak to the company u got it from, because not alot of places can support lte atm its like a transition thats happenning 3rd what i can suggest you do is grab a tool like odin, and odin back to stock rom and then use snapdragon tool by mskip its the 2nd or 3rd from this forum up, and go from there and that should help u further on in getting back to normal , and if you're flashing jelly bean roms or what not, you have lte still but it'll show as 4g or what not, which rom have you flashed btw.
wali01x said:
1st wrong thread, this has nothing to do with development, 2nd if ur getting 4g lte issues then speak to the company u got it from, because not alot of places can support lte atm its like a transition thats happenning 3rd what i can suggest you do is grab a tool like odin, and odin back to stock rom and then use snapdragon tool by mskip its the 2nd or 3rd from this forum up, and go from there and that should help u further on in getting back to normal , and if you're flashing jelly bean roms or what not, you have lte still but it'll show as 4g or what not, which rom have you flashed btw.
Click to expand...
Click to collapse
You need to check your APN settings and make sure you're using the proper LTE APNs for your carrier and make sure that LTE is available in your area 100%.
Also you need to enable LTE on the mobile connections screen within whatever ROM you flash.
ka24e said:
You need to check your APN settings and make sure you're using the proper LTE APNs for your carrier and make sure that LTE is available in your area 100%.
Also you need to enable LTE on the mobile connections screen within whatever ROM you flash.
Click to expand...
Click to collapse
but he's saying he's flashing a rom and losing LTE, but apn most the times stick, thats why i was wondering which rom was it, because then we can let them know to make sure their apn sticks make its easier for anyone else that flashes.
I know first hand wali and his partner in crime have stellar ROMs flash one of those guarantee you won't be disappointed
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
It could also be that he has lte but the icons says 4G for lte I think it's the case for some roms. Because the phone companies made us believe that hsdpa+ was 4G when in fact it's more like 3.7G more or less. What I'm trying to say is did you do a speed test to make sure?
4G might just be lte after all.
Sent from my Nexus 7 using XDA Premium HD app
I know when on blackjelly it only shows 4 I believe but the speed test shows lte speeds.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
lets blame the companies for skrewing everything up with toggles.
run a speed test and look at more info and see what it shows, also check your apn settings via settings/more settings and mobile network then access point names and then take a screenshot if possible by holding power + home button and post it up, because if u should have LTE service ur apns must be LTE otherwise you will be defaulted to regular apn which might throttle you like whoa well i know our ics doesn't do that but not that i hate anyone's ics, Nun, Ariel and Kyan all have done a good job in their ics's.
I don't know if this helps but go to settings and then about, then status and check network, most likely says UMTS or well it does for me on ALL 4.1.1 rom's. But, go to mobile networks and try to connect to another provider than yours, then when it says it cannot connect, re-connect to your own and I bet you will get HS+. Only problem is, if you toggle on wifi or reboot, you will have to do this all over again to retain the higher network connection.
I have not been able to come up with a solution yet and do not know if it is a 747m problem only or if it effects 747 as well.
wali01x said:
lets blame the companies for skrewing everything up with toggles.
run a speed test and look at more info and see what it shows, also check your apn settings via settings/more settings and mobile network then access point names and then take a screenshot if possible by holding power + home button and post it up, because if u should have LTE service ur apns must be LTE otherwise you will be defaulted to regular apn which might throttle you like whoa well i know our ics doesn't do that but not that i hate anyone's ics, Nun, Ariel and Kyan all have done a good job in their ics's.
Click to expand...
Click to collapse
Hey guys, i have a few questions
i have a tmobile gs3 and am passionately waiting for the JB OTA update. Untill then however, i would love to use CM10 JB ROM. THe only problem is that it doesnt have the tmobile wifi "built-in" app for that. So does anyone know a way for that to happen? (PM me if you know a way).
Also, currently im am using ICS and it seems like i need at least one bar of cellular coverage for wifi to work. If i am not registering a cellular network, my wifi will not work. I noticed this pretty recently and was wondering if it is like that normally. Are there apps or fixes that can allow you to use wifi if you are not registering cellular network at all (kinda like an airplane mode)?
Thanks alot
I will donate to developers if they can help me out
Don't want to be one of those people, but there are a lot of threads on it. But, pretty much, unless it has changed recently, there isn't a wifi-calling for any CM stuff yet and not sure if there will be. Some people were working on a project. There are other roms out there that do have working wifi calling though, might want to take a look at those.
Also, you don't need cell signal for the wifi calling to work.
http://forum.xda-developers.com/search.php?searchid=75169894
What do u mean a WiFi built in app? Also have u tried any new radios for cell coverage? And WiFi does not need any cellular service at all
sarni84 said:
What do u mean a WiFi built in app? Also have u tried any new radios for cell coverage? And WiFi does not need any cellular service at all
Click to expand...
Click to collapse
thanks for quick reply guys.
i have had cm10 jb on my gs3 and then i decided that i needed tmobile wifi calling. so once i downloaded stock ics from samsung and installed it, my wifi calling only works when i am registering the cellular network. If i dont have any bars (and wifi is connected) it won't call at all. wjat could be the fix for this?
Did you do a clean install..
psykhotic said:
Did you do a clean install..
Click to expand...
Click to collapse
probably not. i just downloaded a zip and installed it using odin software. i didnt erase the old stuff. How would i do a clean reset?
mityaz07 said:
probably not. i just downloaded a zip and installed it using odin software. i didnt erase the old stuff. How would i do a clean reset?
Click to expand...
Click to collapse
Well if u flashed the stock ROM with Odin like u said let it boot up then go into stock recovery or if u have a custom recovery wipe data and caches. To get in it is the same way either way. Vol up, home, and power at same time
I just moved to CM10 a few minutes ago and personally, I don't know how I would ever go back to anything less than this. Why worry about WiFi calling when there are plenty of VoIP alternatives that use Google Voice?
Sent from my SGH-T999 using xda premium
jonathan3579 said:
I just moved to CM10 a few minutes ago and personally, I don't know how I would ever go back to anything less than this. Why worry about WiFi calling when there are plenty of VoIP alternatives that use Google Voice?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
can i somehow set it up so that when my tmobile number is unavailable, it redirects it to google voice? But only when my number is unavailable (as in i wouldn't want to set the redirect every time i am planning to go off service). The thing is that i go to school and i see patients all day long, and in some places i have reception and in some i dont. its very irregular and unpredictable. so if i could set it up in the way that "if unavailable, redirect to google voice" type of thing, i would be a happy camper.
Oh and also, even my google voice does not work if i am not registering a cellular network just a bit. (help with this too?)
thanks guys
sarni84 said:
Well if u flashed the stock ROM with Odin like u said let it boot up then go into stock recovery or if u have a custom recovery wipe data and caches. To get in it is the same way either way. Vol up, home, and power at same time
Click to expand...
Click to collapse
im not sure what i did, but i know that i did not specifically erase any data. it just seems that wifi calling is an integral part of the firmware that any "random" data on the phone should no phase it. hmm...
Can someone confirm that CM10 JB has a option in the Phone App menu to forward a call when unreachable? I donw want to go thru the hassle of installing it if it doesnt have that option.
thanks alot guys
mityaz07 said:
can i somehow set it up so that when my tmobile number is unavailable, it redirects it to google voice? But only when my number is unavailable (as in i wouldn't want to set the redirect every time i am planning to go off service). The thing is that i go to school and i see patients all day long, and in some places i have reception and in some i dont. its very irregular and unpredictable. so if i could set it up in the way that "if unavailable, redirect to google voice" type of thing, i would be a happy camper.
Oh and also, even my google voice does not work if i am not registering a cellular network just a bit. (help with this too?)
thanks guys
Click to expand...
Click to collapse
I'll look into this further and see what I can uncover for you. I use GrooveIP for my VoIP needs and it was a godsend when I was on the $30 plan with T-Mobile. Hopefully I can find something that will suit your needs in the process.
Sent from my SGH-T999 using xda premium
mityaz07 said:
Can someone confirm that CM10 JB has a option in the Phone App menu to forward a call when unreachable? I donw want to go thru the hassle of installing it if it doesnt have that option.
thanks alot guys
Click to expand...
Click to collapse
There should be a setting for phone forwarding just like any other OS/phone. Just change it to your GV number and should be GTG.